Jozef Keckes

1 - 318 out of 318Page size: 500

Sort by: Publication date

Research output

2025
Published
Resolving the fundamentals of the J-integral concept by multi-method in situ nanoscale stress-strain mapping
Meindlhumer, M., Alfreider, M., Sheshi, N., Hohenwarter, A., Todt, J., Rosenthal, M., Burghammer, M., Salvati, E., Keckes, J. & Kiener, D., 22 Feb 2025, In: Communications materials. 2025, 6, 15 p., 35.
Research output: Contribution to journal › Article › Research › peer-review
Published
Combined X-ray microdiffraction and micromechanical testing for direct measurement of thin film elastic constants
Janknecht, R., Hahn, R., Koutná, N., Todt, J., Meindlhumer, M., Davidok, A., Riedl, H., Keckes, J. & Mayrhofer, P. H., 15 Feb 2025, In: Materials and Design. 252.2025, April, 11 p., 113720.
Research output: Contribution to journal › Article › Research › peer-review
Published
20 kHz X-ray diffraction on Cu thin films explores thermomechanical fatigue at high strain-rates
Ziegelwanger, T., Reisinger, M., Vedad, B., Hlushko, K., Van Petegem, S., Todt, J., Meindlhumer, M. & Keckes, J., 31 Jan 2025, In: Materials and Design. 251.2025, March, 9 p., 113664.
Research output: Contribution to journal › Article › Research › peer-review
2024
Published
Revealing the hidden polysulfides in solid-state Na-S batteries: How pressure and electrical transport control kinetic pathways
Nguyen, H. Q., Kanedal, M. D., Todt, J., Jin, F., Do, Q., Zalka, D., Maximenko, A., Stoian, D., Schell, N., Beek, W. V., Boles, S., Keckes, J. & Rettenwander, D., 31 Dec 2024
Research output: Other contribution › Research
Published
Influence of increasing chromium content on additively manufactured tool steels: Microstructural and mechanical evolution before and after heat treatment
Ofner, N., Bodner, S., Kunnas, P., Asci, A., Kutlesa, K., Stark, A., Höbenreich, P., Aumayr, C., Wu, L., Turk, C., Keckes, J. & Meindlhumer, M., 21 Dec 2024, In: Journal of Materials Research and Technology. 34.2025, January-February, p. 2715-2727 13 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Strong high-density composites from wheat straw
Neudecker, F., Veigel, S., Bodner, S., Keckes, J., Duchoslav, J., Stifter, D. & Gindl-Altmutter, W., 18 Oct 2024, In: Composites Part A: Applied Science and Manufacturing. 188.2025, January, 11 p., 108533.
Research output: Contribution to journal › Article › Research › peer-review
Published
Nanoscale stress and microstructure gradients across a buckled Mo-Cu bilayer: Cu self-annealing triggered by interface delamination
Lassnig, A., Todt, J., Tkadletz, M., Žák, S., Mitterer, C., Medjahed, A. A., Burghammer, M., Keckes, J., Cordill, M. J. & Meindlhumer, M., 15 Oct 2024, In: Acta Materialia. 283.2025, 15 January, 15 p., 120465.
Research output: Contribution to journal › Article › Research › peer-review
Published
Backside metallization affects residual stress and bending strength of the recast layer in laser-diced Si
Ziegelwanger, T., Reisinger, M., Matoy, K., Medjahed, A. A., Zalesak, J., Gruber, M., Meindlhumer, M. & Keckes, J., Oct 2024, In: Materials Science in Semiconductor Processing. 181, 108579.
Research output: Contribution to journal › Article › Research › peer-review
E-pub ahead of print
Understanding the origin of lithium dendrite branching in Li_6.5La₃Zr_1.5Ta_0.5O₁₂ solid-state electrolyte via microscopy measurements
Yildirim, C., Flatscher, F., Ganschow, S., Lassnig, A., Gammer, C., Todt, J., Keckes, J. & Rettenwander, D., 18 Sept 2024, (E-pub ahead of print) In: Nature Communications. 15.2024, 1, 8 p., 8207.
Research output: Contribution to journal › Article › Research › peer-review
Published
Hydrogen penetration into the NiTi superelastic alloy investigated in-situ by synchrotron diffraction experiments
Weiser, A., Todt, J., Holcova, J., Zalezak, T., Paulik, A., Holec, D., Jary, M., Zobac, O., Mrazek, J., Frenzel, J., Keckes, J. & Dlouhý, A., 23 Jul 2024, In: Acta materialia. 277.2024, 15 September, 11 p., 120217.
Research output: Contribution to journal › Article › Research › peer-review
E-pub ahead of print
Comparing the properties of cellulose nanofibrils from wood and bark of Norway spruce (Picea abies KARST.) and silver poplar (Populus alba L.)
Supriyadi, D., Bodner, S., Keckes, J., Gindl-Altmutter, W. & Veigel, S., 4 Jun 2024, (E-pub ahead of print) In: Carbohydrate polymer technologies and applications. 7.2024, June, 14 p., 100527.
Research output: Contribution to journal › Article › Research › peer-review
Published
Multimethod cross-sectional characterization approaching the limits of diamond monophase multilayers
Meindlhumer, M., Grau, J., Sternschulte, H., Halahovets, Y., Siffalovic, P., Burghammer, M., Steinmüller-Nethl, D. & Keckes, J., 13 May 2024, In: Materials characterization. 212.2024, June, 15 p., 113973.
Research output: Contribution to journal › Article › Research › peer-review
Published
Toughness enhancement in TiN/Zr0.37Al0.63N1.09 multilayer films
Lorentzon, M., Meindlhumer, M., Palisaitis, J., Greczynski, G., Keckes, J., Rosen, J., Hultman, L., Birch, J. & Ghafoor, N., 6 May 2024, In: Acta Materialia. 273.2024, 1 July, 14 p., 119979.
Research output: Contribution to journal › Article › Research › peer-review
E-pub ahead of print
Peculiarity of hydrogen absorption in duplex steels: Phase-selective lattice swelling and stress evolution
Pogrielz, T., Eichinger, M., Weiser, A., Todt, J., Hohenwarter, A., Ascii, A., Sarac, B., Brandl, D., Ressel, G., Jary, M., Dlouhý, A., Mori, G. K. & Keckes, J., 27 Apr 2024, (E-pub ahead of print) In: Scripta Materialia. 248.2024, 15 July, 7 p., 116142.
Research output: Contribution to journal › Article › Research › peer-review
Published
Hardness and fracture toughness enhancement in transition metal diboride multilayer films with structural variations
Vidis, M., Fiantok, T., Gocnik, M., Svec, P. J., Nagy, S., Truchly, M., Izai, V., Roch, T., Satrapinskyy, L., Sroba, V., Meindlhumer, M., Grancic, B., Kus, P., Keckes, J. & Mikula, M., 21 Mar 2024, In: Materialia. 34.2024, May, 11 p., 102070.
Research output: Contribution to journal › Article › Research › peer-review
Published
Micromechanical Properties of Micro- and Nanocrystalline CVD Diamond Thin Films with Gradient Microstructures and Stresses
Meindlhumer, M., Ziegelwanger, T., Grau, J., Sternschulte, H., Sztucki, M., Steinmüller-Nethl, D. & Keckes, J., 12 Jan 2024, In: Journal of Vacuum Science and Technology A: Vacuum, Surfaces and Films. 42.2024, 2, 12 p., 023401.
Research output: Contribution to journal › Article › Research › peer-review
2023
Published
Operando Spatial and Temporal Tracking of Axial Stresses and Interfaces in Solid-state Batteries
Mičky, S., Šimon, E., Todt, J., Végsö, K., Nádaždy, P., Krížik, P., Majková, E., Keckes, J., Li, J. & Siffalovic, P., 3 Dec 2023, In: Small. 20.2024, 17, 7 p., 2307837.
Research output: Contribution to journal › Article › Research › peer-review
Published
Deflecting Dendrites by Introducing Compressive Stress in Li₇La₃Zr₂O₁₂ Using Ion Implantation
Flatscher, F., Todt, J., Burghammer, M., Søreide, H. S., Porz, L., Li, Y., Wenner, S., Bobal, V., Ganschow, S., Sartory, B., Brunner, R., Hatzoglou, C., Keckes, J. & Rettenwander, D., 9 Nov 2023, In: Small. 20.2022, 12, 8 p., 2307515.
Research output: Contribution to journal › Article › Research › peer-review
Published
The suitability of common reed (Phragmites australis) for load-bearing structural materials
Albrecht, K., Neudecker, F., Veigel, S., Bodner, S., Keckes, J. & Gindl-Altmutter, W., Oct 2023, In: Journal of materials science. 58.2023, 39, p. 15411-15420 10 p.
Research output: Contribution to journal › Article › Research › peer-review
E-pub ahead of print
Design of high-strength martensitic steels by novel mixed-metal nanoprecipitates for high toughness and suppressed hydrogen embrittlement
Moshtaghi, M., Maawad, E., Bendo, A., Krause, A., Todt, J., Keckes, J. & Safyari, M., 14 Sept 2023, (E-pub ahead of print) In: Materials & design. 234.2023, October, 15 p., 112323.
Research output: Contribution to journal › Article › Research › peer-review
E-pub ahead of print
Ti₄₀Zr₁₀Cu₃₆Pd₁₄ bulk metallic glass as oral implant material
Rezvan, A., Sharifikolouei, E., Soprunyuk, V., Schranz, W., Todt, J., Lassnig, A., Gammer, C., Sifferlinger, N. A., Asci, A., Okulov, I., Schlögl, S., Keckes, J., Najmi, Z., Cochis, A., Scalia, A. C., Rimondini, L., Sarac, B. & Eckert, J., 16 Aug 2023, (E-pub ahead of print) In: Materials and Design. 233.2023, 10 p., 112256.
Research output: Contribution to journal › Article › Research › peer-review
Published
Intragranular thermal fatigue of Cu thin films: Near-grain boundary hardening, strain localization and voiding
Hlushko, K., Ziegelwanger, T., Reisinger, M., Todt, J., Meindlhumer, M., Beuer, S., Rommel, M., Greving, I., Flenner, S., Kopecek, J., Keckes, J., Detlefs, C. & Yildirim, C., 1 Jul 2023, In: Acta Materialia. 253.2023, 1 July, 10 p., 118961.
Research output: Contribution to journal › Article › Research › peer-review
Published
Revealing dynamic-mechanical properties of precipitates in a nanostructured thin film using micromechanical spectroscopy
Alfreider, M., Meindlhumer, M., Ziegelwanger, T., Daniel, R., Keckes, J. & Kiener, D., 25 Jun 2023, In: MRS Bulletin. 49.2024, 1, p. 49-58 10 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Manufacturing size effect on the structural and mechanical properties of additively manufactured Ti-6Al-4V microbeams
Yin, K., Cao, B., Todt, J., Gutmann, F., Tunçay, H. F., Roth, A., Fischer, F., Grübel, N., Pfaff, A., Ganzenmüller, G. C., Keckes, J., Hiermaier, S. & Eberl, C., 20 Jun 2023, In: JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY. 149.2023, 20 June, p. 18-30 13 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Delignification and Densification as a Route to Enable the Use of Wheat Straw for Structural Materials
Neudecker, F., Jakob, M., Bodner, S., Keckes, J., Buerstmayr, H. & Gindl-Altmutter, W., 4 May 2023, In: ACS Sustainable Chemistry and Engineering. 11.2023, 19, p. 7596-7604 9 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Effect of pulse-current-based protocols on the lithium dendrite formation and evolution in all-solid-state batteries
Reisecker, V., Flatscher, F., Porz, L., Fincher, C., Todt, J., Hanghofer, I., Hennige, V., Linares-Moreau, M., Falcaro, P., Ganschow, S., Wenner, S., Chiang, Y. M., Keckes, J., Fleig, J. & Rettenwander, D., 27 Apr 2023, In: Nature Communications. 14.2023, 12 p., 2432.
Research output: Contribution to journal › Article › Research › peer-review
Published
Local gradients of microstructure and residual stresses in Si device sidewalls separated by laser dicing
Ziegelwanger, T., Meindlhumer, M., Todt, J., Reisinger, M., Matoy, K. & Keckes, J., 24 Apr 2023.
Research output: Contribution to conference › Poster › Research
Published
Probing the composition dependence of residual stress distribution in tungsten-titanium nanocrystalline thin films
Sinojiya, R. J., Paulachan, P., Falah Chamasemani, F., Bodlos, R., Hammer, R., Zalesak, J., Reisinger, M., Scheiber, D., Keckes, J., Romaner, L. & Brunner, R., 15 Feb 2023, In: Communications materials. 2023, 4, 12 p., 11.
Research output: Contribution to journal › Article › Research › peer-review
Published
Investigation of the microstructure of a graded ZrN/Ti0.33Al0.67N multilayer coating using cross-sectional characterization methods
Frank, F., Tkadletz, M., Saringer, C., Czettl, C., Pohler, M., Burghammer, M., Todt, J., Zalesak, J., Keckes, J. & Schalk, N., 25 Jan 2023, In: Surface & coatings technology. 453.2023, 25 January, 8 p., 129126.
Research output: Contribution to journal › Article › Research › peer-review
Published
Microstructural characterization and mechanical properties of nanocomposite AlCrSiN thin films
Kutlesa, K., Meindlhumer, M. & Keckes, J., 2023.
Research output: Contribution to conference › Poster › Research
2022
Published
Degradation of regenerated cellulose filaments by hydrogen chloride under aqueous and non-aqueous conditions
Ungerer, B., Sulaeva, I., Bodner, S., Potthast, A., Keckes, J., Müller, U. & Veigel, S., Dec 2022, In: Carbohydrate polymer technologies and applications. 4.2022, December, 9 p., 100238.
Research output: Contribution to journal › Article › Research › peer-review
Published
Graded Inconel-stainless steel multi-material structure by inter- and intralayer variation of metal alloys
Bodner, S., Hlushko, K., van de Vorst, L. T. G., Meindlhumer, M., Todt, J., Nielsen, M. A., Hooijmans, J. W., Saurwalt, J. J., Mirzaei, S. & Keckes, J., 19 Nov 2022, In: Journal of Materials Research and Technology. 21.2022, November-December, p. 4846-4859 14 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Local microstructural evolution and the role of residual stresses in the phase stability of a laser powder bed fused cold-work tool steel
Platl, J., Bodner, S. C., Harald, L., Turk, C., Nielsen, M.-A., Keckes, J. & Schnitzer, R., 22 Sept 2022, In: Materials characterization. 193.2022, November, 11 p., 112318.
Research output: Contribution to journal › Article › Research › peer-review
Published
Precipitation-based grain boundary design alters Inter- to Trans-granular Fracture in AlCrN Thin Films
Meindlhumer, M., Ziegelwanger, T., Zalesak, J., Hans, M., Löfler, L., Spor, S., Jäger, N., Stark, A., Hruby, H., Daniel, R., Holec, D., Schneider, J. M., Mitterer, C. & Keckes, J., 15 Sept 2022, In: Acta materialia. 237.2022, 15 September, 18 p., 118156.
Research output: Contribution to journal › Article › Research › peer-review
E-pub ahead of print
Combining hardness measurements of a heat-treated crankshaft bearing with cross-sectional residual stress and retained austenite distributions measured by HEXRD
Mevec, D. G., Jászfi, V., Prevedel, P., Todt, J., Maawad, E., Keckes, J. & Raninger, P., 19 Aug 2022, (E-pub ahead of print) In: Materials Today Communications. 33.2022, December, 8 p., 104267.
Research output: Contribution to journal › Article › Research › peer-review
Published
Influence of Hatch Strategy on Crystallographic Texture Evolution, Mechanical Anisotropy of Laserbeam Powder Bed Fused S316L Steel
Bodner, S., Hlushko, K., Kutleša, K., Todt, J., Renk, O., Meindlhumer, M., Resch, F., Nielsen, M.-A., Keckes, J. & Eckert, J., 2 Aug 2022, In: Advanced engineering materials. 2022, 25 p., 2200524.
Research output: Contribution to journal › Article › Research › peer-review
E-pub ahead of print
X-ray nanodiffraction analysis of residual stresses in polysilicon electrodes of vertical power transistors
Karner, S., Blank, O., Rösch, M., Burghammer, M., Zalesak, J., Keckes, J. & Todt, J., 20 Jun 2022, (E-pub ahead of print) In: Materialia. 24.2022, August, 6 p., 101484.
Research output: Contribution to journal › Article › Research › peer-review
E-pub ahead of print
Axially and radially inhomogeneous swelling in commercial 18650 Li-ion battery cells
Blazek, P., Westenberger, P., Erker, S., Brinek, A., Zikmund, T., Rettenwander, D., Wagner, N. P., Keckes, J., Kaiser, J., Kazda, T., Vyroubal, P., Macak, M. & Todt, J., 27 May 2022, (E-pub ahead of print) In: Journal of energy storage. 52.2022, 15 August, 10 p., 104563.
Research output: Contribution to journal › Article › Research › peer-review
Published
Impact of Si on the high-temperature oxidation of AlCr(Si)N coatings
Jäger, N., Meindlhumer, M., Zitek, M., Spor, S., Hruby, H., Nahif, F., Julin, J., Rosenthal, M., Keckes, J., Mitterer, C. & Daniel, R., 20 Feb 2022, In: JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY. 100.2022, 20 February, p. 91-100 10 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Cracking mechanism in a laser powder bed fused cold-work tool steel: The role of residual stresses, microstructure and local elemental concentrations
Platl, J., Bodner, S. C., Hofer, C., Landefeld, A., Leitner, H., Turk, C., Nielsen, M.-A., Demir, A. G., Previtali, B., Keckes, J. & Schnitzer, R., 15 Feb 2022, In: Acta materialia. 225.2022, 15 February, 16 p., 117570.
Research output: Contribution to journal › Article › Research › peer-review
Published
Microstructure-dependent phase stability and precipitation kinetics in equiatomic CrMnFeCoNi high-entropy alloy: Role of grain boundaries
Daniel, R., Zalesak, J., Matko, I., Baumegger, W., Hohenwarter, A., George, E. P. & Keckes, J., 15 Jan 2022, In: Acta materialia. 223.2022, 15 January, 8 p., 117470.
Research output: Contribution to journal › Article › Research › peer-review
Published
Nanobeam electron diffraction strain mapping in monocrystalline silicon of modern trench power MOSFETs
Karner, S., Blank, O., Rösch, M., Zalesak, J., Keckes, J. & Gammer, C., 2022, In: Microelectronic engineering. 264.2022, 15 August, 111870.
Research output: Contribution to journal › Article › Research › peer-review
2021
Published
How electron beam melting tailors the Al-sensitive microstructure and mechanical response of a novel process-adapted y-TiAl based alloy
Wimler, D., Käsznar, K., Musi, M., Breuning, C., Markl, M., Keckes, J., Clemens, H., Körner, C. & Mayer, S., 15 Dec 2021, In: Materials and Design. 212.2021, 15 December, 13 p., 110187.
Research output: Contribution to journal › Article › Research › peer-review
Published
Influence of Gradient Residual Stress and Tip Shape on Stress Fields Inside Indented TiN Hard Coating
Todt, J., Zalesak, J., Krywka, C. & Keckes, J., 11 Jul 2021, In: Advanced engineering materials.
Research output: Contribution to journal › Article › Research › peer-review
Published
Effect of pressure and temperature on microstructure of self-assembled gradient Al_xTi_1−XN coatings
Zalesak, J., Todt, J., Michalička, J., Sartory, B., Matko, I., Lessiak, M., Traxler, M., Weißenbacher, R., Pitonak, R., Gammer, C. & Keckes, J., 3 Apr 2021, In: Coatings. 11.2021, 4, 15 p., 416.
Research output: Contribution to journal › Article › Research › peer-review
Published
Predicting strength of Finnish birch veneers based on three different failure criteria
Pramreiter, M., Bodner, S. C., Keckes, J., Stadlmann, A., Feist, F., Baumann, G., Maawad, E. & Müller, U., 15 Mar 2021, In: Holzforschung. 75.2021, 9, p. 847-856 10 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Ion irradiation-induced localized stress relaxation in W thin film revealed by cross-sectional X-ray nanodiffraction
Hlushko, K., Mackova, A., Zalesak, J., Burghammer, M., Davydok, A., Krywka, C., Daniel, R., Keckes, J. & Todt, J., 7 Feb 2021, In: Thin solid films. 722.2021, 31 March, 6 p., 138571.
Research output: Contribution to journal › Article › Research › peer-review
Published
Correlative cross-sectional characterization of nitrided, carburized and shot-peened steels: synchrotron micro-X-ray diffraction analysis of stress, microstructure and phase gradients
Bodner, S. C., Meindlhumer, M., Ziegelwanger, T., Winklmayr, H., Hatzenbichler, T., Schindelbacher, C., Sartory, B., Krobath, M., Ecker, W., Schell, N. & Keckes, J., 3 Feb 2021, In: Journal of Materials Research and Technology. 11.2021, March-April, p. 1396-1410 15 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Evolution of structure, residual stress, thermal stability and wear resistance of nanocrystalline multilayered Al0.7Cr0.3N-Al0.67Ti0.33N coatings
Spor, S., Jäger, N., Meindlhumer, M., Hruby, H., Burghammer, M., Nahif, F., Mitterer, C., Keckes, J. & Daniel, R., 2021, In: Surface & coatings technology. 425.2021, 15 November, 9 p., 127712.
Research output: Contribution to journal › Article › Research › peer-review
Published
Zerstörungsfreie Charakterisierung von Furnieren für strukturelle Verbundwerkstoffe: Evaluierung von Methoden und Einflussfaktoren Maximilian
Pramreiter, M., Bodner, S. C., Keckes, J., Stadlmann, A., Konnerth, J., Feist, F., Baumann, G., Huber, C. & Müller, U., 2021, In: Holztechnologie. 62.2021, 1, p. 5-18 13 p.
Research output: Contribution to journal › Article › Research › peer-review
2020
E-pub ahead of print
Evolution of stress fields during crack growth and arrest in a brittle-ductile CrN-Cr clamped-cantilever analysed by X-ray nanodiffraction and modelling
Meindlhumer, M., Brandt, L. R., Zalesak, J., Rosenthal, M., Hruby, H., Kopecek, J., Salvati, E., Mitterer, C., Daniel, R., Todt, J., Keckes, J. & Korsunsky, A. M., 28 Nov 2020, (E-pub ahead of print) In: Materials and Design. 2021, 198, 16 p., 109365.
Research output: Contribution to journal › Article › Research › peer-review
Published
Multi-scale interface design of strong and damage resistant hierarchical nanostructured materials
Daniel, R., Meindlhumer, M., Zalesak, J., Baumegger, W., Todt, J., Ziegelwanger, T., Keckes, J., Mitterer, C. & Keckes, J., Nov 2020, In: Materials and Design. 196, November, p. 1-11 109169.
Research output: Contribution to journal › Article › Research › peer-review
Published
Nanoindentation and microbending analyses of glassy and crystalline Zr([sbnd]Hf)[sbnd]Cu thin-film alloys
Haviar, S., Kozák, T., Meindlhumer, M., Zítek, M., Opatová, K., Kučerová, L., Keckes, J. & Zeman, P., 15 Oct 2020, In: Surface and Coatings Technology. 399, 126139.
Research output: Contribution to journal › Article › Research › peer-review
Published
Nanoscale stress distributions and microstructural changes at scratch track cross-sections of a deformed brittle-ductile CrN-Cr bilayer
Meindlhumer, M., Zalesak, J., Ecker, W., Rosenthal, M., Niese, S., Gawlitza, P., Hruby, H., Mitterer, C., Daniel, R., Keckes, J. & Todt, J., 5 Aug 2020, In: Materials & design. 195.2020, October, 16 p., 109023.
Research output: Contribution to journal › Article › Research › peer-review
Published
Surface oxidation of nanocrystalline CVD TiB₂ hard coatings revealed by cross-sectional nano-analytics and in-situ micro-cantilever testing
Gruber, D. P., Zalesak, J., Todt, J., Tkadletz, M., Sartory, B., Suuronen, J. P., Ziegelwanger, T., Czettl, C., Mitterer, C. & Keckes, J., 20 Jul 2020, In: Surface and Coatings Technology. 399.2020, 15 October, 9 p., 126181.
Research output: Contribution to journal › Article › Research › peer-review
Published
Extraordinary high-temperature behavior of electrically conductive Hf₇B₂₃Si₂₂C₆N₄₀ ceramic film
Zeman, P., Zuzjaková, Čerstvý, R., Houška, J., Shen, Y., Todt, J., Jiang, J., Daniel, R., Keckes, J., Meletis, E. I. & Vlček, J., 15 Jun 2020, In: Surface and Coatings Technology. 391.2020, 15 June, 8 p., 125686.
Research output: Contribution to journal › Article › Research › peer-review
Published
Indentation response of a superlattice thin film revealed by in-situ scanning X-ray nanodiffraction
Todt, J., Krywka, C., Zhang, Z. L., Mayrhofer, P. H., Keckes, J. & Bartosik, M., 29 May 2020, In: Acta Materialia. 195.2020, 15 August, p. 425-432 8 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Structure and electrical resistivity of individual carbonised natural and man-made cellulose fibres
Gindl-Altmutter, W., Czabany, I., Unterweger, C., Gierlinger, N., Xiao, N., Bodner, S. C. & Keckes, J., 7 May 2020, In: Journal of materials science. 55.2020, 23, p. 10271-10280 10 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Influence of Fiber Deviation on Strength of Thin Birch (Betula pendula Roth.) Veneers
Pramreiter, M., Bodner, S. C., Keckes, J., Stadlmann, A., Kumpenza, C. & Müller, U., 1 Apr 2020, In: Materials. 13.2020, 7, 12 p., 1484.
Research output: Contribution to journal › Article › Research › peer-review
Published
Inconel-Steel Multilayers by Liquid Dispersed Metal Powder Bed Fusion: Microstructure, Residual Stress and Property Gradients
Bodner, S. C., van de Vorst, L. T. G., Zalesak, J., Todt, J., Keckes, J., Maier-Kiener, V., Sartory, B., Schell, N., Hooijmans, J. W., Saurwalt, J. J. & Keckes, J., Mar 2020, In: Additive Manufacturing. 32.2020, March, 101027.
Research output: Contribution to journal › Article › Research › peer-review
Published
Nanoscale residual stress and microstructure gradients across the cutting edge area of a TiN coating on WC –Co
Meindlhumer, M., Jäger, N., Spor, S., Rosenthal, M., Keckes, J., Hruby, H., Mitterer, C., Daniel, R., Keckes, J. & Todt, J., 29 Feb 2020, In: Scripta materialia. 182.2020, June, p. 11-15 5 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Dark-field X-ray microscopy reveals mosaicity and strain gradients across sub-surface TiC and TiN particles in steel matrix composites
Hlushko, K., Keckes, J., Ressel, G., Pörnbacher, J., Ecker, W., Kutsal, M., Cook, P. K., Detlefs, C. & Yildirim, C., 2020, In: Scripta materialia. 187.2020, October, p. 402-406 5 p.
Research output: Contribution to journal › Article › Research › peer-review
2019
Published
Stress-controlled decomposition routes in cubic AlCrN films assessed by in-situ high-temperature high-energy grazing incidence transmission X-ray diffraction
Meindlhumer, M., Klima, S., Jäger, N., Stark, A., Hruby, H., Mitterer, C., Keckes, J. & Daniel, R., 2 Dec 2019, In: Scientific reports (London : Nature Publishing Group). 2019, 9, 14 p., 18027.
Research output: Contribution to journal › Article › Research › peer-review
E-pub ahead of print
Microstructure and stress gradients in TiW thin films characterized by 40 nm X-ray diffraction and transmission electron microscopy
Saghaeian, F., Keckes, J., Woehlert, S., Rosenthal, M., Reisinger, M. & Todt, J., 14 Oct 2019, (E-pub ahead of print) In: Thin solid films. 691.2019, 1 December, 7 p., 137576.
Research output: Contribution to journal › Article › Research › peer-review
Published
Cross-sectional gradients of residual stresses, microstructure and phases in a nitrided steel revealed by 20 µm synchrotron X-ray diffraction
Bodner, S. C., Ziegelwanger, T., Meindlhumer, M., Holcova, J., Todt, J., Schell, N. & Keckes, J., Oct 2019, In: Metallurgia Italiana. 2019, 10, p. 7-11 5 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Investigation of high cyclic fatigue behaviour of thin copper films using MEMS structure
Saghaeian, F., Lederer, M., Hofer, A., Todt, J., Keckes, J. & Khatibi, G., 19 Jul 2019, In: International Journal of Fatigue. 128.2019, November, 8 p., 105179.
Research output: Contribution to journal › Article › Research › peer-review
Published
Structure-stress relationships in nanocrystalline multilayered Al0.7Cr0.3N/Al0.9Cr0.1N coatings studied by cross-sectional X-ray nanodiffraction
Klima, S., Jäger, N., Hruby, H., Mitterer, C., Keckes, J., Burghammer, M. & Daniel, R., 15 May 2019, In: Materials and Design. 170, p. 1-9 107702.
Research output: Contribution to journal › Article › Research › peer-review
Published
Annealing-assisted high-pressure torsion in Zr₅₅Cu₃₀Al₁₀Ni₅ metallic glass
Sarac, B., Spieckermann, F., Rezvan, A., Gammer, C., Krämer, L., Kim, J. T., Keckes, J., Pippan, R. & Eckert, J., 5 May 2019, In: Journal of alloys and compounds. 784.2019, p. 1323-1333 11 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Biomimetic hard and tough nanoceramic Ti–Al–N film with self-assembled six-level hierarchy
Meindlhumer, M., Zalesak, J., Pitonak, R., Todt, J., Sartory, B., Burghammer, M., Stark, A., Schell, N., Daniel, R., Keckes, J., Lessiak, M., Köpf, A., Weißenbacher, R. & Keckes, J., 28 Apr 2019, In: Nanoscale. 11.2019, 16, p. 7986-7995 10 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Gradients of microstructure, stresses and mechanical properties in a multi-layered diamond thin film revealed by correlative cross-sectional nano-analytics
Gruber, D., Todt, J., Wöhrl, N., Zalesak, J., Tkadletz, M., Kubec, A., Niese, S., Burghammer, M., Rosenthal, M., Sternschulte, H., Pfeifenberger, M. J., Sartory, B. & Keckes, J., 1 Apr 2019, In: Carbon. 144.2019, April, p. 666-674 9 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
In situ analysis of the effect of high heating rates and initial microstructure on the formation and homogeneity of austenite
Eggbauer, A., Lukas, M., Ressel, G., Prevedel, P., Mendez Martin, F., Keckes, J., Stark, A. & Ebner, R., 22 Mar 2019, In: Journal of materials science. 54.2019, 12, p. 9197-9212 16 p.
Research output: Contribution to journal › Article › Research › peer-review
E-pub ahead of print
Lignin-based multiwall carbon nanotubes
Gindl-Altmutter, W., Köhnke, J., Unterweger, C., Gierlinger, N., Keckes, J., Zalesak, J. & Rojas, O. J., 22 Mar 2019, (E-pub ahead of print) In: Composites Part A: Applied Science and Manufacturing. 121.2019, June, p. 175-179 5 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Study of CuO Nanowire Growth on Different Copper Surfaces
Fritz-Popovski, G., Sosada-Ludwikowska, F., Köck, A., Keckes, J. & Maier, G. A., 28 Jan 2019, In: Scientific reports (London : Nature Publishing Group). 9.2019, 807, 13 p., 807.
Research output: Contribution to journal › Article › Research › peer-review
Published
Anisotropy of fracture toughness in nanostructured ceramics controlled by grain boundary design
Daniel, R., Meindlhumer, M., Baumegger, W., Todt, J., Zalesak, J., Ziegelwanger, T., Mitterer, C. & Keckes, J., 2019, In: Materials and Design. 161.2019, January, p. 80-85 6 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Evolution of structure and residual stress of a fcc/hex-AlCrN multi-layered system upon thermal loading revealed by cross-sectional X-ray nano-diffraction
Jäger, N., Klima, S., Hruby, H., Julin, J., Burghammer, M., Keckes, J., Mitterer, C. & Daniel, R., 2019, In: Acta materialia. 162.2019, 1, p. 55-66 12 p.
Research output: Contribution to journal › Article › Research › peer-review
2018
E-pub ahead of print
Evolution of microstructure and mechanical properties of a grades TiAlON thin film investigated by cross-sectional characterization techniques
Schalk, N., Tkadletz, M., Terziyska, V., Deluca, M., Letofsky-Papst, I., Keckes, J. & Mitterer, C., 14 Dec 2018, (E-pub ahead of print) In: Surface & coatings technology. 315.2019, February, p. 155-161 7 p.
Research output: Contribution to journal › Article › Research › peer-review
E-pub ahead of print
An investigation on shear banding and crystallographic texture of Ag–Cu alloys deformed by high-pressure torsion
Ghosh, P., Kormout, K. S., Todt, J., Lienert, U., Keckes, J. & Pippan, R., 2 Mar 2018, (E-pub ahead of print) In: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 233.2018, 3, p. 794-806 13 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
30 nm X-ray focusing correlates oscillatory stress, texture and structural defect gradients across multilayered Ti N-SiO_x thin film
Keckes, J., Daniel, R., Todt, J., Zalesak, J., Sartory, B., Braun, S., Gluch, J., Rosenthal, M., Burghammer, M. C., Mitterer, C., Niese, S. & Kubec, A., 2018, In: Acta materialia. 144, p. 862-873
Research output: Contribution to journal › Article › Research › peer-review
Published
Cross-sectional characterization techniques as the basis for knowledge-based design of graded CVD TiN-TiB₂ coatings
Tkadletz, M., Schalk, N., Mitterer, C., Keckes, J., Pohler, M. & Czettl, C., 2018, In: International journal of refractory metals & hard materials. 71, p. 280-284
Research output: Contribution to journal › Article › Research › peer-review
Published
Evolution of structure and mechanical properties of nanocrystalline multi-layered arc-evaporated AlCrN-AlTiN coatings upon thermal loading revealed by X-ray nanodiffraction and tribological investigation
Klima, S., Jäger, N., Meindlhumer, M., Hruby, H., Keckes, J. & Daniel, R., 2018.
Research output: Contribution to conference › Poster › Research
Published
Nanoscale residual stress depth profiling by focused ion beam milling and eigenstrain analysis
Korsunsky, A. M., Salvati, E., Lunt, A. G. J., Sui, T., Mughal, Z. M., Daniel, R., Keckes, J., Bemporad, E. & Sebastiani, M., 2018, In: Materials and Design. 145, p. 55-64
Research output: Contribution to journal › Article › Research › peer-review
Published
New insights into the oxidation behaviour of AlCrSiN coatings and an new approach to avoid trans-interface diffusion at elevated temperatures
Jäger, N., Klima, S., Meindlhumer, M., Hruby, H., Mitterer, C., Keckes, J. & Daniel, R., 2018.
Research output: Contribution to conference › Poster › Research
2017
Published
Complementary High Spatial Resolution Methods in Materials Science and Engineering
Paris, O., Lang, D., LI, J., Schumacher, P., Deluca, M., Daniel, R., Tkadletz, M., Schalk, N., Mitterer, C., Todt, J., Keckes, J., Zhang, Z., Popovski, G., Ganser, C., Teichert, C. & Clemens, H., 31 Dec 2017, In: Advanced engineering materials. 19.2017, 4, 22 p., 1600671.
Research output: Contribution to journal › Article › Research › peer-review
E-pub ahead of print
Corrigendum to “Structural modifications in sub-Tg annealed CuZr-based metallic glass”
Sarac, B., Bernasconi, A., Wright, J., Stoica, M., Spieckermann, F., Mühlbacher, M., Keckes, J., Bian, X. L., Wang, G. & Eckert, J., 6 Dec 2017, (E-pub ahead of print) In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 712.2018, 17 January, p. 819 1 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Gradient residual strain and stress distributions in a high pressure torsion deformed iron disk revealed by high energy X-ray diffraction
Todt, J., Keckes, J., Winter, G., Staron, P. & Hohenwarter, A., 27 Nov 2017, In: Scripta Materialia. 146.2018, 15 March, p. 178-181 4 p.
Research output: Contribution to journal › Article › Research › peer-review
E-pub ahead of print
Resolving alternating stress gradients and dislocation densities across AlxGa1-xN multilayer structures on Si(111)
Reisinger, M., Tomberger, M., Zechner, J., Daumiller, I., Sartory, B., Ecker, W., Keckes, J. & Lechner, R. T., 16 Oct 2017, (E-pub ahead of print) In: Applied physics letters. 111.2017, 16, p. 162103 4 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
High resolution residual stress gradient characterization in W/TiN-stack on Si(100): Correlating in-plane stress and grain size distributions in W sublayer
Hammer, R., Todt, J., Keckes, J., Sartory, B., Parteder, G., Kraft, J. & Defregger, S., 15 Oct 2017, In: Materials and Design. 132.2017, 15 October, p. 72-78 7 p.
Research output: Contribution to journal › Article › Research › peer-review
E-pub ahead of print
Phase evolution and carbon redistribution during continuous tempering of martensite studied with high resolution techniques
Vieweg, A., Povoden-Karadeniz, E., Ressel, G., Prevedel, P., Wojcik, T., Mendez Martin, F., Stark, A., Keckes, J. & Kozeschnik, E., 4 Oct 2017, (E-pub ahead of print) In: Materials and Design. 136.2017, 15 December, p. 214-222 9 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Atomic origin for rejuvenation of a Zr-based metallic glass at cryogenic temperature
Bian, X. L., Wang, G., Yi, J., Jia, Y. D., Bednarčík, J., Zhai, Q. J., Kaban, I., Sarac, B., Mühlbacher, M., Spieckermann, F., Keckes, J. & Eckert, J., 25 Sept 2017, In: Journal of alloys and compounds. 718.2017, 25 September, p. 254-259 6 p.
Research output: Contribution to journal › Article › Research › peer-review
E-pub ahead of print
Structural modifications in sub-T_g annealed CuZr-based metallic glass
Sarac, B., Bernasconi, A., Wright, J., Stoica, M., Spieckermann, F., Mühlbacher, M., Keckes, J., Bian, X., Wang, G. & Eckert, J., 14 Sept 2017, (E-pub ahead of print) In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 707.2017, 7 November, p. 245-252 8 p.
Research output: Contribution to journal › Article › Research › peer-review
E-pub ahead of print
Peculiarity of self-assembled cubic nanolamellae in the TiN/AlN system: Epitaxial self-stabilization by element deficiency/excess
Zalesak, J., Holec, D., Matko, I., Petrenec, M., Sartory, B., Koutna, N., Daniel, R., Pitonak, R. & Keckes, J., 5 Apr 2017, (E-pub ahead of print) In: Acta materialia. 131.2017, 1 June, p. 391-399 9 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Effect of growth conditions on interface stability and thermophysical properties of sputtered Cu films on Si with and without WTi barrier layers
Souli, I., Terziyska, V., Keckes, J., Robl, W., Zechner, J. & Mitterer, C., 9 Feb 2017, In: Journal of vacuum science & technology / B (JVST). 35.2017, 2, 11 p., 022201.
Research output: Contribution to journal › Article › Research › peer-review
Published
Nanostructured coatings for tooling applications
Köpf, A., Keckes, J., Todt, J., Pitonak, R. & Weissenbacher, R., 1 Jan 2017, In: International Journal of Refractory Metals and Hard Materials. 62.2017, January, Part B, p. 219-224 6 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Cross-sectional characterization techniques as the basis for knowledge-based design of graded CVD TiN-TiB2 coatings
Tkadletz, M., Schalk, N., Mitterer, C., Hofer, C., Keckes, J., Deluca, M., Pohler, M. & Czettl, C., 2017.
Research output: Contribution to conference › Poster › Research
Published
Cross-sectional characterization techniques as the basis for knowledge-based design of graded CVD TiN-TiB₂ coatings
Tkadletz, M., Schalk, N., Mitterer, C., Keckes, J., Pohler, M. & Czettl, C., 2017, 19th Plansee Seminar. p. 88/1-88/9
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
New insights into the oxidation behaviour of AlCrSiN coatings and a new approach to avoid trans-interface diffusion at elevated temperatures
Jäger, N., Klima, S., Hruby, H., Mitterer, C., Keckes, J. & Daniel, R., 2017.
Research output: Contribution to conference › Poster › Research
Published
Thermal expansion of Ti-Al-N and Cr-Al-N coatings
Bartosik, M., Holec, D., Apel, D., Klaus, M., Genzel, C., Keckes, J., Arndt, M., Polcik, P., Koller, C. M. & Mayrhofer, P. H., 2017, In: Scripta materialia. 127.2017, 15 January, p. 182-185 4 p.
Research output: Contribution to journal › Article › Research › peer-review
2016
E-pub ahead of print
Grain boundary design of thin films: Using tilted brittle interfaces for multiple crack deflection toughening
Daniel, R., Meindlhumer, M., Baumegger, W., Zalesak, J., Sartory, B., Burghammer, M. C., Mitterer, C. & Keckes, J., 2 Oct 2016, (E-pub ahead of print) In: Acta materialia. 122.2017, 1 January, p. 130-137 8 p.
Research output: Contribution to journal › Article › Research › peer-review
E-pub ahead of print
Curvature determination of embedded silicon chips by in situ rocking curve X-ray diffraction measurements at elevated temperatures
Angerer, P., Schöngrundner, R., Macurova, K., Wießner, M. & Keckes, J., 28 Sept 2016, (E-pub ahead of print) In: Powder diffraction. 31.2016, 4, p. 267-273 7 p.
Research output: Contribution to journal › Article › Research › peer-review
E-pub ahead of print
Fracture toughness enhancement of brittle nanostructured materials by spatial heterogeneity: A micromechanical proof for CrN/Cr and TiN/SiOx multilayers
Daniel, R., Meindlhumer, M., Zalesak, J., Sartory, B., Zeilinger, A., Mitterer, C. & Keckes, J., 13 May 2016, (E-pub ahead of print) In: Materials & design. 104.2016, 15 August, p. 227-234 8 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
In-situ Observation of Cross- Sectional Microstructural Changes and Stress Distributions in Fracturing TiN Thin Film during Nanoindentation
Zeilinger, A., Todt, J., Krywka, C., Müller, M., Ecker, W., Sartory, B., Meindlhumer, M., Stefenelli, M., Daniel, R., Mitterer, C. & Keckes, J., 7 Mar 2016, In: Scientific reports (London : Nature Publishing Group). 6:22670, p. 1-14 14 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Advanced characterization methods for wear resistant hard coatings: A review on recent progress
Tkadletz, M., Schalk, N., Daniel, R., Keckes, J., Czettl, C. & Mitterer, C., 2016, In: Surface & coatings technology. 285, p. 31-46 16 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Al-rich cubic Al0.8Ti0.2N coating with self-organized nano-lamellar microstructure: Thermal and mechanical properties
Todt, J., Zalesak, J., Daniel, R., Pitonak, R., Köpf, A., Weißenbacher, R., Sartory, B., Mitterer, C. & Keckes, J., 2016, In: Surface & coatings technology. 291, p. 89-93 5 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Carbon microparticles from organosolv lignin as filler for conducting Poly(lactic acid)
Köhnke, J., Fürst, C., Unterweger, C., Rennhofer, H., Lichtenegger, H. C., Keckes, J., Emsenhuber, G., Mahendran, A. R., Liebner, F. & Gindl-Altmutter, W., 2016, In: Cellular polymers. 8, 6
Research output: Contribution to journal › Article › Research › peer-review
Published
Combinatorial refinement of thin-film microstructure, properties and process conditions: Iterative nanoscale search for self-assembled TiAlN nanolamellae
Zalesak, J., Todt, J., Pitonak, R., Köpf, A., Weißenbacher, R., Sartory, B., Burghammer, M., Daniel, R. & Keckes, J., 2016, In: Journal of applied crystallography. 49, 6, p. 2217-2225 9 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Cross-sectional stress distribution in AlxGa1-xN heterostructure on Si(111) substrate characterized by ion beam layer removal method and precession electron diffraction
Reisinger, M., Zalesak, J., Daniel, R., Tomberger, M., Weiss, J. K., Darbal, A. D., Petrenec, M., Zechner, J., Daumiller, I., Ecker, W., Sartory, B. & Keckes, J., 2016, In: Materials and Design. 106, p. 476-481 6 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Design of multilayer metallization to reduce mechanical loading: Effect of growth conditions on interface stability and thermo-mechanical properties of sputtered Cu films on Si with and without WTi barrier layers
Souli, I., Terziyska, V., Keckes, J., Zechner, J. & Mitterer, C., 2016.
Research output: Contribution to conference › Presentation › Research
Published
Dry, hydrophobic microfibrillated cellulose powder obtained in a simple procedure using alkyl ketene dimer
Yan, Y., Amer, H., Rosenau, T., Zollfrank, C., Dörrstein, J., Jobst, C., Zimmermann, T., Keckes, J., Veigel, S., Gindl-Altmutter, W. & Li, J., 2016, In: Cellulose. 23.2016, 2, p. 1189-1197 9 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Evolution of structure, stresses and mechanical properties of a fcc/hex-AlCrN multilayer system upon thermal loading revealed by cross-sectional X-ray nanodiffraction and micromechanical testing
Jäger, N., Klima, S., Hruby, H., Mitterer, C., Keckes, J. & Daniel, R., 2016.
Research output: Contribution to conference › Poster › Research
Published
Integrated experimental and computational approach for residual stress investigation near through-silicon vias
Deluca, M., Hammer, R., Keckes, J., Kraft, J., Schrank, F., Todt, J., Robach, O., Micha, J. S. & Defregger, S., 2016, In: Journal of applied physics. 120, 19
Research output: Contribution to journal › Article › Research › peer-review
Published
Interface controlled microstructure evolution in nanolayered thin films
Bartosik, M., Keckes, J., Persson, P. O. Å., Riedl, H. & Mayrhofer, P. H., 2016, In: Scripta materialia. 123, p. 13-16 4 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Lignocellulose Nanofiber-Reinforced Polystyrene Produced from Composite Microspheres Obtained in Suspension Polymerization Shows Superior Mechanical Performance
Ballner, D., Herzele, S., Keckes, J., Edler, M., Griesser, T., Saake, B., Liebner, F., Potthast, A., Paulik, C. & Gindl-Altmutter, W., 2016, In: ACS Applied Materials & Interfaces. 8, 21, p. 13520-13525 6 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
MACRO- and MICROSCOPIC Properties of Gradient Ultra-High-Strength seamless Steel Tubes Produced by dedicated thermo-mechanical treatments
Winter, G., Klarner, J., Buchmayr, B. & Keckes, J., 2016.
Research output: Contribution to conference › Presentation › Research › peer-review
Published
Nano-machining for advanced X-ray crystal optics
Záprazný, Z., Korytár, D., Jergel, M., Šiffalovič, P., Halahovets, Y., Keckes, J., Matko, I., Ferrari, C., Vagovič, P. & Mikloška, M., 2016.
Research output: Contribution to conference › Presentation › Research › peer-review
Published
Nanostructured CVD coatings and cemented carbides-A perfect match?
Köpf, A., Keckes, J., Todt, J., Pitonak, R. & Weissenbacher, R., 2016, World PM 2016 Congress and Exhibition.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Novel TiALN coating with special nanostructure, deposited by HR MT-CVD [Neuartige TiALN-Beschichtung mit spezieller nanostruktur, abgeschieden mittels HR MT-CVD]
Pitonak, R., Köpf, A., Weißenbacher, R., Keckes, J. & Tod, J., 2016, In: Keramische Zeitschrift. 68, 2, p. 111-117 7 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Spatial material heterogeneity: A strategy for fracture toughness enhancement of nanostructured films
Daniel, R., Zalesak, J., Mitterer, C., Sartory, B., Meindlhumer, M. & Keckes, J., 2016.
Research output: Contribution to conference › Presentation › Research
Published
Structure-stress relationships in nanocrystalline multi-layered AlCrN coatings studied by cross-sectional X-ray nanodiffraction
Klima, S., Jäger, N., Hruby, H., Mitterer, C., Keckes, J. & Daniel, R., 2016.
Research output: Contribution to conference › Poster › Research
Published
X-ray nanodiffraction analysis of stress oscillations in a W thin film on through-silicon via
Todt, J., Hammer, H., Sartory, B., Burghammer, M., Kraft, J., Daniel, R., Keckes, J. & Defregger, S., 2016, In: Journal of applied crystallography. 49, p. 182-187 6 p.
Research output: Contribution to journal › Article › Research › peer-review
2015
Published
Experimental Characterization and Modeling of Residual Stress Grandiens across Straight and Bent Seamless Steel Tubes
Winter, G., Klarner, J., Staron, P., Buchmayr, B. & Keckes, J., 16 Apr 2015, p. 231 - 236.
Research output: Contribution to conference › Presentation › Research
Published
Virtual process design for cold formed components
Schratter, S., Keckes, J., Winter, G. & Buchmayr, B., 16 Apr 2015, Material Forming ESAFORM 2015. Trans Tech Publications, p. 1279 - 1284 (Key Engineering Materials ; vol. Vol 651-653).
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Copper diffusion into single-crystalline TiN studied by transmission electron microscopy and atom probe tomography
Mühlbacher, M., Mendez Martin, F., Sartory, B., Schalk, N., Keckes, J., Lu, J., Hultman, L. & Mitterer, C., 2015, In: Thin solid films. 574, p. 103-109
Research output: Contribution to journal › Article › Research › peer-review
Published
Determination of residual stresses and fracture properties on a local scale
Kiener, D., Treml, R., Kozic, D., Brunner, R., Keckes, J. & Zechner, J., 2015.
Research output: Contribution to conference › Presentation › Research › peer-review
Published
Dry-blasting of CVD α-Al₂O₃hard coatings: Influence of blasting media size, hardness and coating texture on the stress-depth gradients investigated by X-ray nanodiffraction
Tkadletz, M., Schalk, N., Keckes, J., Krajinovic, I., Czettl, C. & Mitterer, C., 2015.
Research output: Contribution to conference › Presentation › Research › peer-review
Published
Evaluation of TiN diffusion barrier layers with different microstructures by transmission electron microscopy and atom probe tomography
Mühlbacher, M., Mendez Martin, F., Sartory, B., Chitu, L., Lu, J., Schalk, N., Keckes, J., Hultman, L. & Mitterer, C., 2015.
Research output: Contribution to conference › Presentation › Research › peer-review
Published
Experimental characterization and modelling of triaxial residual stresses in straightened railway rails
Kaiser, R., Stefenelli, M., Hatzenbichler, T., Antretter, T., Hofmann, M., Keckes, J. & Buchmayr, B., 2015, In: The Journal of Strain Analysis for Engineering Design. 50, 3, p. 190-198 9 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
How Residual Stresses Affect the Fracture Properties of Layered Thin Films
Kiener, D., Treml, R., Kozic, D., Zalesak, J., Zechner, J., Keckes, J., Schöngrundner, R., Gänser, H.-P. & Brunner, R., 2015.
Research output: Contribution to conference › Presentation › Research › peer-review
Published
Investigation of residual stress gradients in alpha-Al2O3 coatings introduced by post-deposition blasting treatments using synchrotron X-ray nanodiffraction
Tkadletz, M., Keckes, J., Schalk, N., Krajinovic, I., Czettl, C. & Mitterer, C., 2015.
Research output: Contribution to conference › Presentation › Research › peer-review
Published
Mechanical property enhancement in laminates through control of morphology and crystal orientation
Zeilinger, A., Daniel, R., Stefenelli, M., Sartory, B., Chitu, L., Burghammer, M., Schöberl, T., Kolednik, O., Keckes, J. & Mitterer, C., 2015, In: Journal of physics / D, Applied physics. 48, p. 2953031-2953039
Research output: Contribution to journal › Article › Research › peer-review
Published
Microstructural design: a successful strategy for fracture toughness enhancement of hard coatings
Daniel, R., Zalesak, J., Mitterer, C., Sartory, B., Meindlhumer, M. & Keckes, J., 2015.
Research output: Contribution to conference › Presentation › Research › peer-review
Published
Microstructure-controlled depth gradients of mechanical properties in thin nanocrystalline films: Towards structure-property gradient functionalization
Daniel, R., Zeilinger, A., Schöberl, T., Sartory, B., Mitterer, C. & Keckes, J., 2015, In: Journal of applied physics. 117, 23, p. 235301-1-235301-12
Research output: Contribution to journal › Article › Research › peer-review
Published
Pencil-beam X-ray nanodiffraction on CVD α-Al₂O₃ hard coatings with grain sizes in the micrometer range
Tkadletz, M., Keckes, J., Schalk, N., Czettl, C. & Mitterer, C., 2015.
Research output: Contribution to conference › Presentation › Research › peer-review
Published
Recent progress in advanced characterization methods for the development of hard coatings: From improved composition/microstructure/property relations to insights in degradation behavior
Mitterer, C., Mühlbacher, M., Zeilinger, A., Stefenelli, M., Daniel, R., Tkadletz, M., Schalk, N., Sartory, B. & Keckes, J., 2015.
Research output: Contribution to conference › Presentation › Research › peer-review
Published
Residual stress gradients in alpha-Al2O3 hard coatings determined by pencil-beam X-ray nanodiffraction: The influence of blasting media
Tkadletz, M., Keckes, J., Schalk, N., Krajinovic, I., Burghammer, M., Czettl, C. & Mitterer, C., 2015, In: Surface & coatings technology. 262, p. 134-140 7 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Resolving depth evolution of microstructure and hardness in sputtered CrN film
Zeilinger, A., Daniel, R., Schöberl, T., Stefenelli, M., Sartory, B., Keckes, J. & Mitterer, C., 2015, In: Thin solid films. 581.2015, April, p. 75-79
Research output: Contribution to journal › Article › Research › peer-review
Published
Software Package to evaluate two-dimensional X-ray nanodiffraction data from thin films
Keckes, J., Stefenelli, M., Todt, J., Mitterer, C., Daniel, R. & Keckes, J., 2015.
Research output: Contribution to conference › Poster › Research › peer-review
Published
X-ray nanodiffraction reveals stress distribution across an indented multilayered CrN-Cr thin film
Steffenelli, M., Daniel, R., Ecker, W., Kiener, D., Todt, J., Zeilinger, A., Mitterer, C., Burghammer, M. & Keckes, J., 2015, In: Acta materialia. 85, p. 24-31
Research output: Contribution to journal › Article › Research › peer-review
2014
Published
Mono-textured nanocrystalline thin films with pronounced stress-gradients: On the role of grain boundaries in the stress evolution
Daniel, R., Jäger, E., Todt, J., Sartory, B., Mitterer, C. & Keckes, J., 28 May 2014, In: Journal of applied physics. 115, 20, 203507.
Research output: Contribution to journal › Article › Research › peer-review
Published
Macroscopic fracture behaviour of CrN hard coatings evaluated by X-ray diffraction coupled with four-point bending
Stefenelli, M., Riedl, A., Todt, J., Bartosik, M., Daniel, R., Mitterer, C. & Keckes, J., 1 Jan 2014, Materials Science Forum. Vol. 768-769. p. 272-279 8 p. (Materials Science Forum; vol. 768-769).
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
A combinatorial X-ray sub-micron diffraction study of microstructure, residual stress and phase stability in TiAlN coatings
Riedl, A., Daniel, R., Todt, J., Steffenelli, M., Holec, D., Sartory, B., Krywka, C., Müller, M., Mitterer, C. & Keckes, J., 2014, In: Surface & coatings technology. 257, p. 108-113
Research output: Contribution to journal › Article › Research › peer-review
Published
A new method for polychromatic X-ray μLaue diffraction on a Cu pillar using an energy-dispersive pn-junction charge-coupled device
Abboud, A., Kirchlechner, C., Send, S., Micha, J. S., Ulrich, O., Pashniak, N., Strüder, L. W. J., Keckes, J. & Pietsch, U., 2014, In: Review of scientific instruments. 85, p. 1139011-1139018
Research output: Contribution to journal › Article › Research › peer-review
Published
Controlled functionality of thin films through advanced microstructural design
Daniel, R., Mitterer, C. & Keckes, J., 2014.
Research output: Contribution to conference › Presentation › Research › peer-review
Published
Cu diffusion into single-crystalline TiN studied by transmission electron microscopy and atom probe tomography
Mühlbacher, M., Mendez Martin, F., Sartory, B., Schalk, N., Keckes, J., Lu, J., Hultman, L. & Mitterer, C., 2014.
Research output: Contribution to conference › Presentation › Research › peer-review
Published
Diffusion studies in epitaxial TiN/Cu layers on MgO(001) by high resolution TEM and APT
Mühlbacher, M., Mendez Martin, F., Sartory, B., Schalk, N., Keckes, J., Lu, J., Hultman, L. & Mitterer, C., 2014.
Research output: Contribution to conference › Poster › Research › peer-review
Published
Fracture toughness enhancement of thin films by advanced microstructural design and architecture - Examples of bio-inspired model soft-hard crystalline-amorphous coating systems
Daniel, R., Mitterer, C. & Keckes, J., 2014.
Research output: Contribution to conference › Presentation › Research › peer-review
Published
Humidity-driven deformation of ordered mesoporous silica films
Sharifi Rajabi, P., Marmiroli, B., Sartori, B., Cacho-Nerin, F., Keckes, J., Amenitsch, H. & Paris, O., 2014, In: Bioinspired, Biomimetic and Nanobiomaterials. 3, p. 183-190
Research output: Contribution to journal › Article › Research › peer-review
Published
Investigation of the origin of compressive residual stress in CVD TiB2 hard coatings using synchrotron X-ray nanodiffraction
Schalk, N., Keckes, J., Czettl, C., Burghammer, M., Penoy, M., Michotte, C. & Mitterer, C., 2014, In: Surface & coatings technology. 258, p. 121-126
Research output: Contribution to journal › Article › Research › peer-review
Published
Macroscopic elastic properties of textured ZrN-AlN polycrystalline aggregates: From ab initio calculations to grain-scale interactions
Holec, D., Tasnádi, F., Wagner, P., Friak, M., Neugebauer, J., Mayrhofer, P. H. & Keckes, J., 2014, In: Physical review : B, Condensed matter and materials physics. 90, p. 184106-1-184106-9
Research output: Contribution to journal › Article › Research › peer-review
Published
Microstructural and stress design of thin films - The journey from nitrides to oxides, from nanocrystalline to amorphous materials
Daniel, R., Mitterer, C. & Keckes, J., 2014.
Research output: Contribution to conference › Presentation › Research › peer-review
Published
Microstructure-related depth-gradients of mechanical properties in thin nanocrystalline films
Daniel, R., Zalesak, J., Mitterer, C., Riedl, A., Sartory, B., Keckes, J. & Schöberl, T., 2014.
Research output: Contribution to conference › Presentation › Research › peer-review
Published
New insights into single-grain mechanical behavior from temperature-dependent 3-D coherent X-ray diffraction
Vaxelaire, N., Labat, S., Cornelius, T., Kirchlechner, C., Keckes, J., Schülli, T. & Thomas, O., 2014, In: Acta materialia. 78, p. 46-55
Research output: Contribution to journal › Article › Research › peer-review
Published
Radial crystalline texture in a lyocell fibre revealed by synchrotron nanofocus wide-angle X-ray scattering
Gindl-Altmutter, W., Eichhorn, S. J., Burghammer, M. C. & Keckes, J., 2014, In: Cellulose. p. 845-851
Research output: Contribution to journal › Article › Research › peer-review
Published
Sample tilt-free characterization of residual stress gradients in thin coatings using an in-plane arm-equipped laboratory X-ray diffractometer
Benediktovitch, A. I., Ulyanenkova, T., Keckes, J. & Ulyanenkov, A. P., 2014, In: Journal of applied crystallography. p. 1931-938
Research output: Contribution to journal › Article › Research › peer-review
Published
Sputtered molybdenum films: structure and property evolution with film thickness
Hofer, A. M., Schlacher, J., Keckes, J., Winkler, J. & Mitterer, C., 2014, In: Vacuum. 99, p. 149-152
Research output: Contribution to journal › Article › Research › peer-review
Published
Strategies for fracture toughness enhancement of thin films by advanced microstructural design - Examples of bio-inspired model soft-hard crystalline -amorphous coatings systems
Daniel, R., Mitterer, C. & Keckes, J., 2014.
Research output: Contribution to conference › Presentation › Research › peer-review
Published
Superior oxidation resistance, mechanical properties and residual stresses of an Al-rich nanolamellar Ti0.05Al0.95N coating prepared by CVD
Todt, J., Pitonak, R., Köpf, A., Weißenbacher, R., Sartory, B., Burghammer, M., Daniel, R., Schöberl, T. & Keckes, J., 2014, In: Surface & coatings technology. 258.2014, November, p. 1119-1127
Research output: Contribution to journal › Article › Research › peer-review
Published
Virtual process design for highly reliable cold formed components
Schratter, S., Keckes, J. & Buchmayr, B., 2014, International Science & Technology Congress OMD 2014
. p. 1-10
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
2013
Published
Advanced cross-sectional characterization of hard coatings
Tkadletz, M., Mitterer, C., Keckes, J., Rebelo De Figueiredo, M., Hosemann, P., Burghammer, M., Sartory, B. & Czettl, C., 2013.
Research output: Contribution to conference › Poster › Research › peer-review
Published
Bias- and temperature-dependent strain evolution across nanocrystalline TiAlN films studied by X-ray nanodiffraction
Riedl, A., Todt, J., Daniel, R., Steffenelli, M., Holec, D., Krywka, C., Mitterer, C. & Keckes, J., 2013.
Research output: Contribution to conference › Poster › Research › peer-review
Published
Cross-sectional X-ray nanobeam diffraction analysis of a compositionally graded CrNx thin film
Bartosik, M., Daniel, R., Mitterer, C., Matko, I., Burghammer, M., Mayrhofer, P. H. & Keckes, J., 2013, In: Thin solid films. 542, p. 1-4
Research output: Contribution to journal › Article › Research › peer-review
Published
Diffusion studies in epitaxial TiN/Cu layers on MgO(001)
Mühlbacher, M., Sartory, B., Keckes, J., Lu, J., Hultman, L. & Mitterer, C., 2013.
Research output: Contribution to conference › Poster › Research › peer-review
Published
Effects of structure and interfaces on fracture toughness of CrN/AlN multilayer coatings
Schlögl, M., Kirchlechner, C., Paulitsch, J., Keckes, J. & Mayrhofer, P., 2013, In: Scripta materialia. 68, p. 917-920
Research output: Contribution to journal › Article › Research › peer-review
Published
Influence of AlN layers on mechanical properties and thermal stability of Cr-based nitride coatings
Schlögl, M., Paulitsch, J., Keckes, J. & Mayrhofer, P. H., 2013, In: Thin solid films. 531, p. 113-118
Research output: Contribution to journal › Article › Research › peer-review
Published
Interfacial and inter- diffusion studies of epitaxial TiN/Cu layers on MgO (001) - A comprehensive approach by high resolution TEM and APT
Mühlbacher, M., Mendez Martin, F., Sartory, B., Keckes, J., Lu, J., Lars, H. & Mitterer, C., 2013.
Research output: Contribution to conference › Presentation › Research › peer-review
Published
Novel TiAlN nanostructured CVD coatings with superior oxidation resistance
Keckes, J., Todt, J., Daniel, R., Mitterer, C., Köpf, A., Weißenbacher, R. & Pitonak, R., 2013.
Research output: Contribution to conference › Poster › Research › peer-review
Published
Origins of microstructure and stress gradients in nanocrystalline thin films: The role of growth parameters and self-organization
Daniel, R., Keckes, J., Matko, I., Burghammer, M. & Mitterer, C., 2013, In: Acta materialia. 61, p. 6255-6266
Research output: Contribution to journal › Article › Research › peer-review
Published
Self-organized periodic soft-hard nanolamellae in polycrystalline TiAlN thin films
Keckes, J., Daniel, R., Mitterer, C., Matko, I., Sartory, B., Köpf, A., Weißenbacher, R. & Pitonak, R., 2013, In: Thin solid films. 545, p. 29-32
Research output: Contribution to journal › Article › Research › peer-review
Published
Triaxial Residual Stresses in Thermomechanically Rolled Seamless Tubes characterized by High-Energy Synchrotron X-Ray diffraction
Winter, G., Stefenelli, M., Klarner, J., Staron, P., Fischer, T., Keckes, J. & Buchmayr, B., 2013, Proceedings of the2013 ASME Pressure Vessels & Piping Conference
. p. 1-5
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
X-ray analysis of residual stress gradients in TiN coatings by a Laplace space approach and cross-sectional nanodiffraction: a critical comparison
Steffenelli, M., Todt, J., Riedl, A., Ecker, W., Müller, T., Daniel, R., Burghammer, M. & Keckes, J., 2013, In: Journal of applied crystallography. 46, p. 1-8
Research output: Contribution to journal › Article › Research › peer-review
2012
Published
All-cellulose composites prepared from flax and lyocell fibres compared to epoxy–matrix composites
Gindl-Altmutter, W., Keckes, J., Plackner, J., Liebner, F., Englund, K. & Laborie, M.-P., 2012, In: Composites science and technology. p. 1304-1309
Research output: Contribution to journal › Article › Research › peer-review
Published
A novel approach for determining fracture toughness of hard coatings on the micrometer scale
Riedl, A., Daniel, R., Steffenelli, M., Schöberl, T., Kolednik, O., Mitterer, C. & Keckes, J., 2012, In: Scripta materialia. 67, p. 708-711
Research output: Contribution to journal › Article › Research › peer-review
Published
A two-dimensional waveguide beam for X-ray nanodiffraction
Krywka, C., Neubauer, H., Priebe, M., Salditt, T., Keckes, J., Buffet, A., Roth, S. V., Doehrmann, R. & Mueller, M., 2012, In: Journal of applied crystallography. 45.20212 , Part 1, p. 85-92 8 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Biomimetik design for cell-contacting surfaces-The topographical influences on cell-biomaterial interaction and plasma-based fabrication methods for self-adapted nanostructures
Lackner, J. M., Waldhauser, W., Schmied, F., Teichert, C., Keckes, J. & Kreith, J., 2012, Nanostructural materials for implants and cardiovascular biomedical devices. p. 33-66
Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research
Published
Expected and unexpected plastic behavior at the micron scale: An in situ μLaue tensile study
Kirchlechner, C., Imrich, P., Grosinger, W., Kapp, M., Keckes, J., Micha, J.-S., Ulrich, O., Thomas, O., Labat, S., Motz, C. & Dehm, G., 2012, In: Acta materialia. 60, p. 1252-1258
Research output: Contribution to journal › Article › Research › peer-review
Published
Influence of residual stresses and grain size on the spinodal decomposition of metastable Ti1-xAlxN coatings
Schalk, N., Mitterer, C., Keckes, J., Penoy, M. & Michotte, C., 2012, In: Surface & coatings technology. 209, p. 190-196
Research output: Contribution to journal › Article › Research › peer-review
Published
Investigation of reversible plasticity in a micron-sized, single crystalline copper bending beam by X-ray µLaue diffraction
Kirchlechner, C., Grosinger, W., Kapp, M. W., Imrich, P. J., Micha, J.-S., Ulrich, O., Keckes, J., Dehm, G. & Motz, C., 2012, In: Philosophical magazine. p. 3231-3242
Research output: Contribution to journal › Article › Research › peer-review
Published
Lateral gradients of phases, residual stress and hardness in a laser heated Ti0.52Al0.48N coating on hard metal
Bartosik, M., Daniel, R., Zhang, Z., Deluca, M., Ecker, W., Steffenelli, M., Klaus, M., Genzel, C., Stefenelli, M., Mitterer, C. & Keckes, J., 2012, In: Surface & coatings technology. 206, p. 4502-4510 9 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Quantum mechanically guided design of Co43Fe20Ta5.5X31.5 (X=B, Si, P, S) metallic glasses
Hostert, C., Music, D., Bednarcik, J., Keckes, J. & Schneider, J. M., 2012, In: Journal of physics (Condensed matter). p. 175402-175411
Research output: Contribution to journal › Article › Research › peer-review
Published
Structure related stress gradients in thin nanocrystalline films revealed by X-ray nanodiffraction
Daniel, R., Keckes, J. & Mitterer, C., 2012.
Research output: Contribution to conference › Poster › Research › peer-review
Published
Thermally treated hard coatings characterized by XRD coupled with four-point bending
Steffenelli, M., Riedl, A., Bartosik, M., Daniel, R., Mitterer, C. & Keckes, J., 2012.
Research output: Contribution to conference › Poster › Research › peer-review
Published
The structure and mechanical properties of spines from the cactus Opuntia ficus-indica
Gindl-Altmutter, W. & Keckes, J., 2012, In: BioResources. 7, 1, p. 1232-1237
Research output: Contribution to journal › Article › Research › peer-review
Published
TiO2 (100) Al2O3 (0001) interface: A first-principles study supported by experiment
Popov, M., Spitaler, J., Mühlbacher, M., Walter, C., Keckes, J., Mitterer, C. & Draxl, C., 2012, In: Physical review : B, Condensed matter and materials physics. 86, p. 2053091-20530913
Research output: Contribution to journal › Article › Research › peer-review
Published
X-ray nanodiffraction reveals strain and microstructure evolution in nanocrystalline thin films
Keckes, J., Bartosik, M., Daniel, R., Mitterer, C., Maier, G. A., Ecker, W., Vila-Comamala, J., David, C., Schoeder, S. & Burghammer, M., 2012, In: Scripta materialia. 67, p. 748-751
Research output: Contribution to journal › Article › Research › peer-review
2011
Published
Ab initio molecular dynamics model for density, elastic properties and short range order of Co–Fe–Ta–B metallic glass thin films
Hostert, C., Music, D., Bednarcik, J., Keckes, J., Kapaklis, V., Hjövarsson, B. & Schneider, J. M., 2011, In: European physical journal B, Condensed matter physics : EPJ B. p. 4754011-4754017
Research output: Contribution to journal › Article › Research › peer-review
Published
Cellulose nanofibrils as filler for adhesives: effect on specific fracture energy of solid wood-adhesive bonds
Veigel, S., Müller, U., Keckes, J., Obersriebnig, E. M. & Gindl-Altmutter, W., 2011, In: Cellulose. p. 1227-1237
Research output: Contribution to journal › Article › Research › peer-review
Published
Decomposition pathways in age hardening of Ti-Al-N films
Rachbauer, R., Massl, S., Stergar, E., Holec, D., Kiener, D., Keckes, J., Patscheider, J., Stiefel, M., Leitner, H. & Mayrhofer, P. H., 2011, In: Journal of applied physics. 110, p. 023515-1-023515-10
Research output: Contribution to journal › Article › Research › peer-review
Published
Dislocation storage in single slip oriented Cu micro-tensile samples: New insights by X-ray microdiffraction
Kirchlechner, C., Kiener, D., Motz, C., Labat, S., Vaxelaire, N., Perroud, O., Micha, J.-S., Ulrich, O., Thomas, O., Dehm, G. & Keckes, J., 2011, In: Philosophical magazine. 91, p. 1256-1264
Research output: Contribution to journal › Article › Research › peer-review
Published
Impact of instrumental constraints and imperfections on the dislocation structure in micron-sized Cu compression pillars
Kirchlechner, C., Keckes, J., Motz, C., Grosinger, W., Kapp, M. W., Micha, J.-S., Ulrich, O. & Dehm, G., 2011, In: Acta materialia. 59, p. 5618-5626
Research output: Contribution to journal › Article › Research › peer-review
Published
In Situ High Temperature X-Ray Diffraction Reveals Residual Stress Depth-Profiles in Blasted TiN Hard Coatings
Bartosik, M., Pitonak, R. & Keckes, J., 2011, In: Advanced engineering materials. p. 705-711
Research output: Contribution to journal › Article › Research › peer-review
Published
In situ µLaue: Instrumental setup for the deformation of micron sized samples
Kirchlechner, C., Keckes, J., Micha, J.-S. & Dehm, G., 2011, In: Advanced engineering materials. 13, p. 837-844
Research output: Contribution to journal › Article › Research › peer-review
Published
Local structure around nano-clay agglomerates in PP composites – a scanning X-Ray diffraction study with sub micron resolution
Feuchter, M., Maier, G. A., Burghammer, M., Kracalik, M., Laske, S., Keckes, J. & Pinter, G., 2011, European Polymer Congress 2011. p. 515-515
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Nano-Beam X-ray Diffraction as a Tool to Characterize Gradients of Microstructure and Residual Stress in Nanocrystalline Hard Coatings
Bartosik, M., Daniel, R., Mitterer, C., Schoeder, S., Burghammer, M. & Keckes, J., 2011.
Research output: Contribution to conference › Poster › Research › peer-review
Published
Nano-beam-x-ray diffraction reveals strain, composition, texture and crystal size gradients across nano-crystalline thin films
Keckes, J., Daniel, R., Bartosik, M., Mitterer, C., Schoeder, S. & Burghammer, M., 2011, Proceeding of International Conference on Metallurgical Coatings and Thin Films. p. 55-55
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Polymers characterized using in-situ laboratory saxs/waxs coupled with mechanical tests
Feuchter, M., Keckes, J. & Maier, G. A., 2011.
Research output: Contribution to conference › Poster › Research › peer-review
Published
Size effect of thermal expansion and thermal/intrinsic stresses in nanostructured thin films: Experiment and model
Daniel, R., Holec, D., Bartosik, M., Keckes, J. & Mitterer, C., 2011, In: Acta materialia. 59, p. 6631-6645
Research output: Contribution to journal › Article › Research › peer-review
Published
Stress design of hard coatings
Daniel, R., Keckes, J. & Mitterer, C., 2011, Proceeding of International Conference on Metallurgical Coatings and Thin Films. p. 55-55
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Temperature induced structural gradients in multilayer coatings revealed by position resolved XRR and GISAXS
Maier, G., Kreith, J., Chitu, L., Siffalovic, P., Michaelsen, C. & Keckes, J., 2011.
Research output: Contribution to conference › Poster › Research › peer-review
Published
µLaue: Compression studies on miniaturised Copper single crystals
Kirchlechner, C., Kapp, M., Motz, C., Grosinger, W., Keckes, J., Micha, J.-S., Ulrich, O. & Dehm, G., 2011.
Research output: Contribution to conference › Poster › Research › peer-review
2010
Published
3D strain imaging in sub-micrometer crystals using cross-reciprocal space measurements: Numerical feasibility and experimental methodology
Vaxelaire, N., Labat, S., Chamard, V., Thomas, O., Jaques, V., Picca, F., Ravy, S., Kirchlechner, C. & Keckes, J., 2010, In: Nuclear instruments & methods in physics research / B Beam interactions with materials and atoms. p. 388-393
Research output: Contribution to journal › Article › Research › peer-review
Published
Development of intrinsic and thermal components of residual stress in nanostructured thin films: Grain size dependent phenomena
Daniel, R., Keckes, J. & Mitterer, C., 2010, Proceedings 8th European Conference on Residual Stresses. p. 15-15
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Effect of Grain Size on the Residual Stress State and Thermal Expansion in Magnetron Sputtered Thin Films
Daniel, R., Holec, D., Keckes, J. & Mitterer, C., 2010, Proceedings 37th International Conference on Metallurgical Coatings and Thin Films. p. 63-63
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
In situ μLaue tensile tests on micron sized Cu single crystals
Kirchlechner, C., Imrich, P., Grosinger, W., Kapp, M., Motz, C., Keckes, J. & Dehm, G., 2010.
Research output: Contribution to conference › Poster › Research › peer-review
Published
Methodology for studying strain inhomogeneities in polycrystalline thin films during in situ thermal loading using coherent x-ray diffraction
Vaxelaire, N., Proudhon, H., Labat, S., Kirchlechner, C., Keckes, J., Jaques, V., Ravy, S., Forest, S. & Thomas, O., 2010, In: New journal of physics. p. 1-12
Research output: Contribution to journal › Article › Research › peer-review
Published
Nano-Beam X-ray Diffraction Reveals Structural and Mechanical Gradients in Nano-Crystalline Thin Films
Keckes, J., Bartosik, M., Daniel, R., Mitterer, C., Maier, G., Schoeder, S. & Burghammer, M., 2010.
Research output: Contribution to conference › Poster › Research › peer-review
Published
Residual stresses and thermal fatigue in CrN hard coatings characterized by high-temperature synchrotron X-ray diffraction
Kirchlechner, C., Martinschitz, K. J., Daniel, R., Klaus, M., Genzel, C., Mitterer, C. & Keckes, J., 2010, In: Thin solid films. 518, 8, p. 2090-2096
Research output: Contribution to journal › Article › Research › peer-review
Published
Review: current international research into cellulose nanofibres and nanocomposites
Keckes, J., Eichhorn, S. J., Dufresne, A., Aranguren, M., Marcovich, N. E., Capadona, J. R., Rowan, S. J., Weder, C., Thielemans, W., Roman, M., Renneckar, S., Gindl, W., Veigel, S., Yano, H., Abe, K., Nogi, M. & Nakagaito, A. N., 2010, In: Journal of materials science. p. 1-33
Research output: Contribution to journal › Article › Research › peer-review
Published
The origin of stresses in magnetron-sputtered thin films with zone T structures
Daniel, R., Martinschitz, K., Keckes, J. & Mitterer, C., 2010, In: Acta materialia. 58, p. 2621-2633
Research output: Contribution to journal › Article › Research › peer-review
Published
Thermal Decomposition of Epitaxial Al-Cr-N Hard Coatings: Crystallography and Mechanical State of Individual Phases
Bartosik, M., Daniel, R., Mitterer, C. & Keckes, J., 2010, Proceedings 37th International Conference on Metallurgical Coatings and Thin Films. p. 63-63
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Thermally-induced formation of hexagonal AlN in AlCrN hard coatings on sapphire: Orientation relationships and residual stresses
Bartosik, M., Daniel, R., Mitterer, C. & Keckes, J., 2010, In: Surface & coatings technology. 205, p. 1320-1323
Research output: Contribution to journal › Article › Research › peer-review
Published
X-ray diffraction analysis of three-dimensional residual stress fields reveals origins of thermal fatigue in uncoated and coated steel
Kirchlechner, C., Martinschitz, K. J., Daniel, R., Mitterer, C., Donges, J., Rothkirch, A., Klaus, M., Genzel, C. & Keckes, J., 2010, In: Scripta materialia. 62, p. 774-777
Research output: Contribution to journal › Article › Research › peer-review
2009
Published
Actual versus apparent within cell wall variability of nanoindentation results from wood cell walls related to cellulose microfibril angle
Konnerth, J., Gierlinger, N., Keckes, J. & Gindl, W., 2009, In: Journal of materials science. 44, p. 4399-4406
Research output: Contribution to journal › Article › Research › peer-review
Published
Cellulose in never-dried gel oriented by an AC electric field
Gindl, W., Emsenhuber, G., Maier, G. & Keckes, J., 2009, In: Biomacromolecules. 10, p. 1315-1318
Research output: Contribution to journal › Article › Research › peer-review
Published
Characterization of Mo/Si soft X-ray multilayer mirrors by grazing-incidence small-angle X-ray scattering
Siffalovic, P., Majkova, E., Chitu, L., Jergel, M., Luby, S., Keckes, J., Maier, G. A., Timmann, A., Roth, S. V., Tsuru, T., Harada, T., Yamamoto, M. & Heinzmann, U., 2009, In: Vacuum. 89, p. 19-25
Research output: Contribution to journal › Article › Research › peer-review
Published
Comparison of molecular orientation and mechanical properties of lyocell fibre tow and staple fibres
Keckes, J., Martinschitz, K. J., Boesecke, P., Weber, H., Roeder, T., Sixta, H. & Gindl, W., 2009, In: Cellulose. 16, p. 765-772
Research output: Contribution to journal › Article › Research › peer-review
Published
Elastic constants of fibre-textured thin films determined by X-ray diffraction
Martinschitz, K. J., Daniel, R., Mitterer, C. & Keckes, J., 2009, In: Journal of applied crystallography. 42, p. 1-13
Research output: Contribution to journal › Article › Research › peer-review
Published
Investigation of fracture properties of magnetron-sputtered TiN films by means of a FIB-based cantilever bending technique
Massl, S., Thomma, W., Keckes, J. & Pippan, R., 2009, In: Acta materialia. 57, p. 1768-1776
Research output: Contribution to journal › Article › Research › peer-review
Published
Microstructural evolution during growth of polycrystallin CrN coatings: The role of a Cr interlayer
Daniel, R., Martinschitz, K. J., Keckes, J. & Mitterer, C., 2009.
Research output: Contribution to conference › Poster › Research › peer-review
Published
Microstructural evolution during growth of polycrystalline CrN coatings: The role of a Cr interlayer
Daniel, R., Martinschitz, K., Keckes, J. & Mitterer, C., 2009, Proceedings E-MRS Spring. p. 9-9
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Microstructure related stress state in magnetron sputtered thin films
Daniel, R., Martinschitz, K., Keckes, J. & Mitterer, C., 2009, Proceedings E-MRS Spring Meeting. p. 25-25
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Micro tensile tests: New insights based on µDiffraction
Kirchlechner, C., Motz, C., Grosinger, W., Labat, S., Perroud, O., Thomas, O., Micha, J.-S., Ulrich, O., Dehm, G. & Keckes, J., 2009.
Research output: Contribution to conference › Poster › Research › peer-review
Published
Novel technique to determine elastic constants of thin films
Martinschitz, K., Daniel, R., Mitterer, C. & Keckes, J., 2009, Material Research Society Symposium Proceedings 1139. p. 115-120
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Real-time tracking of nanoparticle self-assembling using GISAXS
Majkova, E., Siffalovic, P., Chitu, L., Jergel, M., Luby, S., Timmann, A., Roth, S. V., Satka, A., Keckes, J. & Maier, G. A., 2009, In: Superlattices and microstructures. 46, p. 286-290
Research output: Contribution to journal › Article › Research › peer-review
Published
Structure, stresses and stress relaxation of TiN/Ag nanocomposite films
Köstenbauer, H., Fontalvo, G., Mitterer, C., Hlawacek, G., Teichert, C. & Keckes, J., 2009, In: Journal of nanoscience and nanotechnology. 9, p. 3606-3610
Research output: Contribution to journal › Article › Research › peer-review
Published
Structure, stresses and stress relaxation of TiN/Cu multilayer and nanocomposite coatings
Köstenbauer, H., Hofer, A. M., Fontalvo, G., Keckes, J. & Mitterer, C., 2009, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 100, p. 114-118
Research output: Contribution to journal › Article › Research › peer-review
Published
Texture development in polycrystalline CrN coatings: the role of growth conditions and a Cr interlayer
Daniel, R., Martinschitz, K. J., Keckes, J. & Mitterer, C., 2009, In: Journal of physics / D, Applied physics. p. 1-13
Research output: Contribution to journal › Article › Research › peer-review
Published
The origin of stresses in magnetron sputtered thin films
Daniel, R., Mitterer, C., Martinschitz, K. J. & Keckes, J., 2009, Proceedings of 4th International Conference on Surface, coatings and Nanostructured Materials. p. 44-44
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
2008
Published
A new cantilever technique reveals spatial distributions of residual stresses in near-surface structures
Massl, S., Keckes, J. & Pippan, R., 2008, In: Scripta materialia. 59, p. 503-506
Research output: Contribution to journal › Article › Research › peer-review
Published
Changes in microfibril angle in cyclically deformed dry coir fibers studied by in-situ synchrotron X-ray diffraction
Martinschitz, K. J., Boesecke, P., Garvey, C. J., Gindl, W. & Keckes, J., 2008, In: Journal of materials science. 43, p. 350-356
Research output: Contribution to journal › Article › Research › peer-review
Published
High-temperature characterization of three-dimensional distribution of residual stresses in Crn coatings on steel
Martinschitz, K. J., Kirchlechner, C., Keckes, J., Daniel, R. & Mitterer, C., 2008.
Research output: Contribution to conference › Poster › Research › peer-review
Published
Intrinsic stresses and stress relaxation in TiN/Ag multilayer coatings during thermal cycling
Köstenbauer, H., Fontalvo, G., Keckes, J. & Mitterer, C., 2008, In: Thin solid films. 516, p. 1920-1924
Research output: Contribution to journal › Article › Research › peer-review
Published
Position resolved residual stress determination in alumina-zirconia multilayered ceramics
Maier, G., Keckes, J., Brechbuehl, J., Guerault, H. & Bermejo Moratinos, R., 2008, In: Materials Science Forum . 571-572, p. 421-425
Research output: Contribution to journal › Article › Research › peer-review
Published
Precipitation processes in a Mg–Zn–Sn alloy studied by TEM and SAXS
Rashkova, B., Prantl, W., Görgl, R., Keckes, J., Cohen, S., Bamberger, M. & Dehm, G., 2008, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. A494, p. 158-164
Research output: Contribution to journal › Article › Research › peer-review
Published
Reorientation of Crystalline and Noncrystalline Regions in Regenerated Cellulose Fibers and Films Tested in Uniaxial Tension
Gindl, W., Reifferscheid, M., Martinschitz, K. J., Boesecke, P. & Keckes, J., 2008, In: Journal of polymer science : B, Polymer physics. 46, p. 297-304
Research output: Contribution to journal › Article › Research › peer-review
Published
Residual stresses in thermally cycled Cr-CrN coatings on Si (100) and on steel
Martinschitz, K. J., Kirchlechner, C., Daniel, R., Mitterer, C. & Keckes, J., 2008.
Research output: Contribution to conference › Poster › Research › peer-review
Published
Residual stresses in thermally cycled CrN coatings on steel
Kirchlechner, C., Martinschitz, K. J., Daniel, R., Mitterer, C. & Keckes, J., 2008, In: Thin solid films. 517, p. 1167-1171
Research output: Contribution to journal › Article › Research › peer-review
Published
Stress evolution in CrN/Cr coating systems during thermal straining
Martinschitz, K. J., Daniel, R., Mitterer, C. & Keckes, J., 2008, In: Thin solid films. 516, p. 1972-1976
Research output: Contribution to journal › Article › Research › peer-review
Published
Stress measurement in thin films with the ion beam layer removal method: Influence of experimental errors and parameters
Massl, S., Köstenbauer, H., Keckes, J. & Pippan, R., 2008, In: Thin solid films. 516, p. 8655-8662
Research output: Contribution to journal › Article › Research › peer-review
Published
Temperature Dependence of Residual Stress Gradients in Shot-Peened Steel Coated with CrN
Martinschitz, K. J., Kirchlechner, C., Daniel, R., Maier, G., Mitterer, C. & Keckes, J., 2008, Stress evaluation in materials using neutrons and synchrotron radiation : selected, peer reviewed papers from the International Conference on Stress Evaluation Using Neutrons and Synchrotron Radiation proceedings, Vienna 24 – 26 September 2007 . Pyzalla, A. R. (ed.). Stafa-Zurich [u.a.] : Trans Tech Publications, p. 101-106 (Materials Science Forum; vol. 571/572 ).
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Thermal Stresses and Microstructure of Tungsten Films on Copper
Kapp, M., Martinschitz, K. J., Keckes, J., Lackner, J. M., Zizak, I. & Dehm, G., 2008, In: Berg- und hüttenmännische Monatshefte : BHM. 517, p. 273-277
Research output: Contribution to journal › Article › Research › peer-review
Published
Tribological behavior of TiN/Ag nanocomposite coatings
Köstenbauer, H., Fontalvo, G., Mitterer, C. & Keckes, J., 2008, In: Tribology Letters. p. 53-60
Research output: Contribution to journal › Article › Research › peer-review
2007
Published
A direct method of determining complex depth profiles of residual stresses in thin films on a nanoscale
Massl, S., Keckes, J. & Pippan, R., 2007, In: Acta materialia. 55, p. 4835-4844
Research output: Contribution to journal › Article › Research › peer-review
Published
Annealing of intrinsic stresses in sputtered TiN films: The role of thickness-dependent gradients of point defect density
Köstenbauer, H., Fontalvo, G., Kapp, M., Keckes, J. & Mitterer, C., 2007, In: Surface & coatings technology. 201, p. 4777-4780
Research output: Contribution to journal › Article › Research › peer-review
Published
Development of texutre in polycrystalline CrN coatings: The role of a Cr interlayer
Daniel, R., Martinschitz, K. J., Keckes, J. & Mitterer, C., 2007.
Research output: Contribution to conference › Poster › Research › peer-review
Published
Drawing of self-reinforced cellulose films
Gindl, W. & Keckes, J., 2007, In: Journal of Applied Polymer Science. 103, p. 2703-2708
Research output: Contribution to journal › Article › Research › peer-review
Published
Fracture of poly(vinylidene fluoride): a combined synchrotron and laboratory in-situ X-ray scattering study
Maier, G. A., Wallner, G., Lang, R., Keckes, J., Amentisch, H. & Fratzl, P., 2007, In: Journal of applied crystallography. 40, Supplement April, p. s564-s567
Research output: Contribution to journal › Article › Research › peer-review
Published
High-temperature residual stresses in thin films characterized by x-ray diffraction substrate curvature method
Keckes, J., Eiper, E., Martinschitz, K. J., Köstenbauer, H., Daniel, R. & Mitterer, C., 2007, In: Review of scientific instruments. 78, p. 036103-01-036103-03
Research output: Contribution to journal › Article › Research › peer-review
Published
Nano/macro-hardness and fracture resistance of Si3N4/SiC composites with up to 13 wt.% of SiC nano-particles
Balog, M., Keckes, J., Schöberl, T., Galusek, D., Hofer, F., Krest'an, J., Lences, Z., Huang, J. L. & Sajgalik, P., 2007, In: Journal of the European Ceramic Society. 27, p. 2145-2152
Research output: Contribution to journal › Article › Research › peer-review
Published
Residual stresses in thermally cycled Cr-crN coatings on Si(100) and on shot peened steel
Martinschitz, K. J., Kirchlechner, C., Daniel, R., Mitterer, C. & Keckes, J., 2007.
Research output: Contribution to conference › Poster › Research › peer-review
Published
Residual stresses in thermally cycled Cr-CrN coatings on Si (100) and on shot peened steel
Martinschitz, K. J., Kirchlechner, C., Daniel, R., Mitterer, C. & Keckes, J., 2007.
Research output: Contribution to conference › Poster › Research › peer-review
Published
Residual stresses in thermally cycled Cr-CrN coatings on Si (100) and on steel
Martinschitz, K., Kirchlechner, C., Daniel, R., Mitterer, C. & Keckes, J., 2007.
Research output: Contribution to conference › Poster › Research › peer-review
Published
Size-independent stresses in Al thin films thermally strained down to -100°C
Eiper, E., Keckes, J., Zizak, I., Cabie, M. & Dehm, G., 2007, In: Acta materialia. 55, p. 1941-1946
Research output: Contribution to journal › Article › Research › peer-review
Published
Structure, stress and stress relaxation of TiN/Cu multilayer and nanocomposite coatings
Köstenbauer, H., Hofer, A. M., Fontalvo, G., Mitterer, C. & Keckes, J., 2007.
Research output: Contribution to conference › Poster › Research › peer-review
Published
Sugar beet cellulose nanofibril-reinforced composites
Leitner, J., Hinterstoisser, B., Wastyn, M., Keckes, J. & Gindl, W., 2007, In: Cellulose. eFirst, p. ?-?
Research output: Contribution to journal › Article › Research › peer-review
2006
Published
A cantilever method to determine depth profiles of residual stresses on the nanoscale
Massl, S., Keckes, J. & Pippan, R., 2006.
Research output: Contribution to conference › Poster › Research › peer-review
Published
A new tensile stage for in situ X-ray scattering experiments combined with mechanical tests
Martinschitz, K.-J., Eiper, E., Keckes, J., Boesecke, P., Schwarzl, P. & Hofbauer, P., 2006.
Research output: Contribution to conference › Poster › Research › peer-review
Published
Changes in the molecular orientation and tensile properties of uniaxially drawn cellulose films
Gindl, W., Martinschitz, K.-J., Boesecke, P. & Keckes, J., 2006, In: Biomacromolecules. p. 3146-3150
Research output: Contribution to journal › Article › Research › peer-review
Published
Characterization of optical anisotropy in oriented poly(ethylene terephthalate) films using refelctance difference spectroscopy
Schmidegg, K., Sun, L., Maier, G. A., Keckes, J. & Zeppenfeld, P., 2006, In: Polymer. 47, p. 4768-4772
Research output: Contribution to journal › Article › Research › peer-review
Published
Combined elastic strain and macroscopic stress characterization in polycrystalline Cu thin films
Eiper, E., Martinschitz, K.-J. & Keckes, J., 2006, In: Powder diffraction. 21, p. 25-29
Research output: Contribution to journal › Article › Research › peer-review
Published
Cyclically deformed cellulose films characterized by in situ synchrotron diffraction coupled with tensile tests
Martinschitz, K.-J., Boesecke, P., Gindl, W. & Keckes, J., 2006.
Research output: Contribution to conference › Poster › Research › peer-review
Published
DHS1100 - A new high temperature attachment for multipurpose 4-circle X-ray goniometers
Resel, R., Keckes, J., Haber, T., Koini, M. & Hofbauer, P., 2006.
Research output: Contribution to conference › Poster › Research › peer-review
Published
HPT-Deformation of copper an nickel single crystals
Hafok, M., Vorhauer, A., Keckes, J. & Pippan, R., 2006, In: Materials Science Forum . 503-504, p. 621-626
Research output: Contribution to journal › Article › Research › peer-review
Published
Influence of Interlayer Thickness on Mechanical Properties of a Cr/CrN Dual Layer Coating System: Structure-Property Relations
Daniel, R., Herrmann, M., Richter, F., Keckes, J. & Mitterer, C., 2006, 10th International Conference on Plasma Surface Engineering. p. 185-185
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
In situ X-ray Diffraction as a tool to probe mechanical phenomena down to the nano-scale
Keckes, J., Eiper, E., Martinschitz, K. J., Boesecke, P., Gindl, W. & Dehm, G., 2006, In: Advanced engineering materials. p. 1084-1088
Research output: Contribution to journal › Article › Research › peer-review
Published
Interlayer thickness influence in the tribological response of dual-layer coatings
Fontalvo, G., Keckes, J., Daniel, R. & Mitterer, C., 2006, 33rd International Conference on Metallurgical Coatings and Thin Films. p. 178-178
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Intrinsic stresses and stress relaxation in thin-ag mulitlayer coatings
Köstenbauer, H., Fontalvo, G., Mitterer, C. & Keckes, J., 2006, Thin Flim 2006. p. 200-200
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Microstructural evolution and phase formation in novel Mg.-Zn based alloys
Rashkova, B., Keckes, J., Levi, G., Gorny, A., Bamberger, M. & Dehm, G., 2006, Proceedings of the 7th International Conference on Magnesium Alloys and their Applications. p. 486-491
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Modification of wetting of copper (Cu) on carbon (C) by plasma treatment and molybdenum (Mo)interlayers
Eisenmenger-Sittner, C., Schrank, C., Neubauer, E., Eiper, E. & Keckes, J., 2006, In: Applied surface science. 252, p. 5343-5346
Research output: Contribution to journal › Article › Research › peer-review
Published
Optimized Performance of CrN Coatings via a Cr Interlayer With Specific Thickness: Structure-Property Relations
Daniel, R., Fontalvo, G., Keckes, J. & Mitterer, C., 2006, Thin Film 2006. p. 199-199
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Orientation of cellulose crystallites in regenerated cellulose fibres under tensile and bending loads
Gindl, W., Martinschitz, K.-J., Boesecke, P. & Keckes, J., 2006, In: Cellulose. p. 621-627
Research output: Contribution to journal › Article › Research › peer-review
Published
Rapid determination of stress factors and absolute residual stresses in thin films
Martinschitz, K. J., Eiper, E., Massl, S., Köstenbauer, H., Daniel, R., Fontalvo, G., Mitterer, C. & Keckes, J., 2006, In: Journal of applied crystallography. 39, p. 777-783
Research output: Contribution to journal › Article › Research › peer-review
Published
Rapid determination of stress factors and residual stresses in anisotropic thin films
Martinschitz, K.-J., Eiper, E. & Keckes, J., 2006.
Research output: Contribution to conference › Poster › Research › peer-review
Published
Residual stresses and strains in thin films characterized by the combination of sin2ψ and substrate curvature methods
Martinschitz, K.-J., Eiper, E. & Keckes, J., 2006.
Research output: Contribution to conference › Poster › Research › peer-review
Published
Size effect in metallic thin films characterized by low-temperature X-ray diffraction
Eiper, E., Martinschitz, K. J., Dehm, G. & Keckes, J., 2006.
Research output: Contribution to conference › Poster › Research › peer-review
Published
Size effect in metallic thin films characterized by low-temperature X-ray diffraction
Eiper, E., Martinschitz, K. J., Dehm, G. & Keckes, J., 2006.
Research output: Contribution to conference › Poster › Research › peer-review
Published
Strain hardening in regenerated cellulose fibres
Gindl, W. & Keckes, J., 2006, In: Composites science and technology. 66, p. 2049-2053
Research output: Contribution to journal › Article › Research › peer-review
Published
Stress Factors and Absolute Residual Stresses in Thin Films Determined by the Combination of Curvature and sin2ψ Methods
Martinschitz, K.-J., Eiper, E. & Keckes, J., 2006, In: Materials Science Forum . 524-525, p. 711-715
Research output: Contribution to journal › Article › Research › peer-review
Published
Structural changes during tensile testing of an all-cellulose composite by in situ synchrotron X-ray diffraction
Gindl, W., Martinschitz, K.-J., Boesecke, P. & Keckes, J., 2006, In: Composites science and technology. p. 2639-2647
Research output: Contribution to journal › Article › Research › peer-review
Published
Structural changes in cyclically deformed cellulosics characterized by in situ synchrotron X-ray diffraction coupled with tensile tests
Keckes, J., Boesecke, P. & Gindl, W., 2006.
Research output: Contribution to conference › Poster › Research › peer-review
Published
Structure and mechanical/tribological properties of TiN-Ag nanocomposite coatings
Köstenbauer, H., Fontalvo, G., Mitterer, C. & Keckes, J., 2006.
Research output: Contribution to conference › Poster › Research › peer-review
Published
Structure and properties of a pulp fibre-reinforced composite with regenerated cellulose matrix
Gindl, W., Schöberl, T. & Keckes, J., 2006, In: Applied physics / A (Series A, Materials science & processing). 83, p. 19-22
Research output: Contribution to journal › Article › Research › peer-review
Published
Temperature dependence of residual stresses in thin films determined by the substrate
Eiper, E., Martinschitz, K.-J., Köstenbauer, H., Massl, S. & Keckes, J., 2006.
Research output: Contribution to conference › Poster › Research › peer-review
Published
Temperature dependence of residual stresses in thin films determined by the substrate curvatur method
Eiper, E., Martinschitz, K.-J., Köstenbauer, H., Massl, S. & Keckes, J., 2006.
Research output: Contribution to conference › Poster › Research › peer-review
Published
Texture changes in cyclically deformed cellulosics characterized by in-situ synchrotron diffraction coupled with tensile tests
Martinschitz, K.-J., Boesecke, P., Gindl, W. & Keckes, J., 2006.
Research output: Contribution to conference › Poster › Research › peer-review
Published
Zukunftsfonds Land Steiermark, Projekt Nr. 119
Eiper, E., Keckes, J. & Pippan, R., 2006
Research output: Book/Report › Commissioned report › Transfer › peer-review
2005
Published
All-cellulose nanocomposite
Gindl, W. & Keckes, J., 2005, In: Polymer. 46, p. 10221-10225
Research output: Contribution to journal › Article › Research › peer-review
Published
Anisotropic intrinsic and extrinsic stresses in epitaxial wurzitic GaN thin film on γ-LiAlO2 (100)
Eiper, E., Hofmann, A., Gerlach, J. W., Rauschenbach, B. & Keckes, J., 2005, In: Journal of crystal growth. 284, p. 561-566
Research output: Contribution to journal › Article › Research › peer-review
Published
Combined elastic strain and macroscopic stress characterization in polycrystalline Cu thin films
Eiper, E., Martinschitz, K.-J. & Keckes, J., 2005, In: Powder diffraction. 20, p. 1-5
Research output: Contribution to journal › Article › Research › peer-review
Published
Eigenspannungs-Charakterisierung mittels Röntgendiffraktometrie
Keckes, J. & Eiper, E., 2005, Handbuch der Nanoanalytik. p. 147-149
Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research
Published
Hardness Limits of SiC and Si3N4 Ceramic Materials
Balog, M., Sajgalík, P., Lencés, Z., Hnatko, M. & Keckes, J., 2005, Key engineering materials. Vol. 59. p. 247-251 (Key engineering materials).
Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research
Published
Hochtemperatur-Röntgendiffraktion - Spannungen und Deformationen in dünnen Aluminium-Schichten auf Silizium
Resch, C., Keckes, J., Eiper, E. & Resel, E., 2005, Handbuch der Nanoanalytik. p. 170-172
Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research
Published
HPT-Deformation of copper and nickel single crystals
Hofak, M., Vorhauer, A., Keckes, J. & Pippan, R., 2005.
Research output: Contribution to conference › Poster › Research › peer-review
Published
HPT-Deformation of Copper and Nickel Single Crystals
Hafok, M., Vorhauer, A., Keckes, J. & Pippan, R., 2005, 3rd International Conference on Nanomaterials by Severe Plastic Deformation. Trans Tech Publications, p. 621-626
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
In-situ WAXS studies of structural changes in wood foils and in individual wood cells during microtrensile tests
Keckes, J., Burgert, I., Müller, M., Kölln, K., Hamilton, M., Burghammer, M., Roth, S. V., Stanzl-Tschegg, S. E. & Fratzl, P., 2005, In: Fibre diffraction review. p. 48-51
Research output: Contribution to journal › Article › Research › peer-review
Published
Nano-Indentation of SiC and Si3N4/SiC ceramic materials
Balog, M., Sajgalík, P., Lencés, Z., Hnatko, M., Keckes, J., Huang, J. L., Janega, J. & Horvathova, R., 2005, In: Materials Science Forum . 290, p. 272-275
Research output: Contribution to journal › Article › Research › peer-review
Published
Nano-versus macro-hardness of liquid phase sintered SiC
Balog, M., Sagalík, P., Hnatko, M., Lencés, Z., Monteverde, F., Keckes, J. & Huang, J.-L., 2005, In: Journal of the European Ceramic Society. 25, p. 529-534
Research output: Contribution to journal › Article › Research › peer-review
Published
Properties of chemically and mechanically isolated fibres of spruce (Picea abies [L.] Karst.). Part 2: Twisting phenomena
Burgert, I., Frühmann, K., Keckes, J., Fratzl, P. & Stanzl-Tschegg, S., 2005, In: Holzforschung : international journal of the biology, chemistry, physics and technology of wood . 59, p. 247-251
Research output: Contribution to journal › Article › Research › peer-review
Published
Properties of chemically and mechanically isolated fibres of spruce (Picea abies [L.] Karst.). Part 3: Mechanical charaterisation
Burgert, I., Eder, M., Frühmann, K., Keckes, J., Fratzl, P. & Stanzl-Tschegg, S., 2005, In: Holzforschung : international journal of the biology, chemistry, physics and technology of wood . 59, p. 354-357
Research output: Contribution to journal › Article › Research › peer-review
Published
Simultaneous determination of experimental elastic and thermal strains in thin films
Keckes, J., 2005, In: Journal of applied crystallography. 38, p. 311-318
Research output: Contribution to journal › Article › Research › peer-review
Published
Structure and properties of a pulp fibre-reinforced composite with regenerated cellulose matrix
Gindl, W., Schöberl, T. & Keckes, J., 2005, In: European physical journal, The / Applied physics : EPJ.
Research output: Contribution to journal › Article › Research › peer-review
Published
X-ray elastic constants determined by the combination of the sin² psi and substrate-curvature methods
Eiper, E., Martinschitz, K.-J., Gerlach, J. W., Lackner, J. M., Zizak, I., Darowski, N. & Keckes, J., 2005, In: Zeitschrift für Metallkunde : international journal of materials research and advanced techniques. 96, p. 1069-1073
Research output: Contribution to journal › Article › Research › peer-review
2004
Published
Anisotropic intrinsic and extrinsic stresses in gan thin film on LiAlO2 (100)
Eiper, E., Gerlach, J. W., Rauschenbach, B. & Keckes, J., 2004.
Research output: Contribution to conference › Poster › Research › peer-review
Published
Effect of growth rate on mean microfibril angle and cross-sectional shape of tracheids of Norway spruce
Sarén, M. P., Serimaa, R., Andersson, S., Saranpää, O., Keckes, J. & Fratzl, P., 2004, In: Trees : structure and function. 18, p. 354-362
Research output: Contribution to journal › Article › Research › peer-review
Published
Epitaxial growth of sexiphenyl on KCL(100)-performance of reciprocal space maps
Oehzelt, M., Haber, T., Andreev, A., Sitter, H., Smilgies, D., Keckes, J. & Resel, R., 2004.
Research output: Contribution to conference › Poster › Research › peer-review
Published
Evaluation of experimental stress-strain dependence in thermally cycled Al thin film on Si(100)
Keckes, J., Hafok, M., Eiper, E., Hofer, A., Resel, R. & Eisenmenger-Sittner, C., 2004, In: Powder diffraction. 19, p. 367-371
Research output: Contribution to journal › Article › Research › peer-review
Published
Fragmentation, Structural Saturation and Dynamic Effects during Severe Plastic Defor-mation
Pippan, R., Vorhauer, A., Wetscher, F., Faleschini, M., Stüwe, H.-P. & Keckes, J., 2004.
Research output: Contribution to conference › Poster › Research › peer-review
Published
High resolution studies of epitaxially grown sexiphenyl on TiO2(110)
Resel, R., Lengyel, O., Oehzelt, M., Eiper, E., Keckes, J., Krenn, J., Koller, G., Berkebile, S. & Ramsey, M., 2004.
Research output: Contribution to conference › Poster › Research › peer-review
Published
In-situ Synchrotron Studies of Structural Changes in Wood during Microtensile Tests
Keckes, J., Burgert, I., Müller, M., Kölln, K., Hamilton, M., Burghammer, M., Roth, S. V., Stanzl-Tschegg, S. & Fratzl, P., 2004, Proceedings of the 2nd International Symposium on Wood Machining. BOKU - Univ. of Natural Resources [u.a.], p. 37-44
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
In-situ WAXS studies of structural changes in wood foils and individual wood cells during microtensile tests
Keckes, J., Burgert, I., Müller, M., Kölln, K., Roth, S. V., Hamilton, M., Burghammer, M., Stanzl-Tschegg, S. & Fratzl, P., 2004.
Research output: Contribution to conference › Poster › Research › peer-review
Published
Mechanical model for the deformation of the wood cell wall
Fratzl, P., Burgert, I. & Keckes, J., 2004, In: Zeitschrift für Metallkunde : international journal of materials research and advanced techniques. 95, p. 579-584
Research output: Contribution to journal › Article › Research › peer-review
Published
Microfibril angle in wood: characterisation using X-ray scattering and influence on mechanical properties
Keckes, J., Burgert, I., Lichtenegger, H., Reiterer, A., Stanzl-Tschegg, S. & Fratzl, P., 2004, Proceedings of COST Action E20, Wood Fibre Cell Wall Structure. p. 189-202
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Residual stresses and size-strain phenomena in thermally cycled Cu layers on anisotropical SiO2(110) substrates
Eiper, E., Hafok, M., Eisenmenger-Sittner, C. & Keckes, J., 2004.
Research output: Contribution to conference › Poster › Research › peer-review
Published
Room temperature deposition of (Ti,Al)N and (Ti,Al)(C,N) coatings by pulsed laser deposition for tribological applications
Lackner, J. M., Waldhauser, W., Ebner, R., Keckes, J. & Schöberl, T., 2004, In: Surface & coatings technology. 177-178, p. 447-452
Research output: Contribution to journal › Article › Research › peer-review
Published
Simultaneous evaluation of elastic and thermal strains in thermally-cycled thin films
Keckes, J., 2004.
Research output: Contribution to conference › Poster › Research › peer-review
Published
Small Angle X-Ray Scattering with Cobalt Radiation for Nanostructure Characterization of Fe-Based Specimen
Erlacher, K., Görgl, R., Keckes, J., Jakob, H., Bruegemann, L., Doppler, P., Bermann, A., Leitner, H., Marsoner, S. & Fratzl, P., 2004, In: Materials Science Forum . 443-444, p. 155-158
Research output: Contribution to journal › Article › Research › peer-review
Published
Structure-function relationships of four compression wood types: micromechanical properties at the tissue and fibre level
Burgert, I., Frühmann, K., Keckes, J., Fratzl, P. & Stanzl-Tschegg, S., 2004, In: Trees : structure and function. 18, p. 480-485
Research output: Contribution to journal › Article › Research › peer-review
Published
Temperature dependence of in-plane stresses in sublayers of Al/AlN/Al2O3(0 0 0 1) structure
Keckes, J., Six, S., Gerlach, J. W. & Rauschenbach, B., 2004, In: Journal of crystal growth. 262, p. 119-123
Research output: Contribution to journal › Article › Research › peer-review
Published
Tensile properties of cellulose acetate butyrate composites reinforced with bacterial cellulose
Gindl, W. & Keckes, J., 2004, In: Composites science and technology. 64, p. 2407-2413
Research output: Contribution to journal › Article › Research › peer-review
Published
Thermally-induced stresses in thin aluminum layers grown on silicon
Eiper, E., Resel, R., Eisenmenger-Sittner, C., Hafok, M. & Keckes, J., 2004, In: Powder diffraction. p. 74-76
Research output: Contribution to journal › Article › Research › peer-review

Research Portal

Jozef Keckes

Research output