Chair of Mechanics (400)

Organisational unit: Chair

1 - 500 out of 809Page size: 500

Research output

  1. 2025
  2. Published

    Damping of vibrations of a rod by dissipation due to diffusion

    Svoboda, J., Hackl, K. & Fischer, F.-D., 1 Mar 2025, In: Scripta Materialia. 257.2025, 1 March, 5 p., 116461.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    On the effect of isotropic and anisotropic dissipative response functions with associated and nonassociated flow on the inelastic behavior of polymeric composites

    Gaddikere Nagaraja, S., Antretter, T. & Schuecker, C., 16 Feb 2025, In: Mechanics of advanced materials and structures. ??? Stand: 28. Februar 2025, ??? Stand: 28. Februar 2025, 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Characterization of High-Speed Steels—Experimental Data and Their Evaluation Supported by Machine Learning Algorithms

    Wießner, M. & Gamsjäger, E., 12 Feb 2025, In: Metals : open access journal . 15.2025, 2, 28 p., 194.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Finite Element Investigation of the Dynamic Behavior of High-Speed Turnouts with Swing-Nose Crossing

    Sistaninia, M., Daves, W., Bucher, C., Antretter, T. & Gänser, H. P., 2025, Advances in Dynamics of Vehicles on Roads and Tracks III - Proceedings of the 28th Symposium of the International Association of Vehicle System Dynamics, IAVSD 2023, Rail Vehicles. Huang, W. & Ahmadian, M. (eds.). p. 1047-1058 12 p. (Lecture Notes in Mechanical Engineering).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. Published

    On the Road Towards Understanding Squats - Metallographic Investigations of Rails

    Gschwandl, T., Spalek, A., Antretter, T. & Daves, W., 2025, Advances in Dynamics of Vehicles on Roads and Tracks III - Proceedings of the 28th Symposium of the International Association of Vehicle System Dynamics, IAVSD 2023, Rail Vehicles. Huang, W. & Ahmadian, M. (eds.). p. 314-323 10 p. (Lecture Notes in Mechanical Engineering).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  7. 2024
  8. Published

    Revisiting the Extension of SGTE Heat Capacity Data to Zero Kelvin: Combining Classical Fit Polynomials with Debye–Einstein Functions

    Gamsjäger, E. & Wießner, M., 4 Nov 2024, In: Journal of phase equilibria and diffusion. 45.2024, 6, p. 1194-1205 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    A variational framework for Cahn–Hilliard-type diffusion coupled with Allen–Cahn-type multi-phase transformations in elastic and dissipative solids

    Gaddikere Nagaraja, S. & Antretter, T., 24 Sept 2024, In: International journal of plasticity. 182.2024, November, 20 p., 104131.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Dissolution of Oxide Particles in Multi-component Slags Governed by Diffusive and Convective Fluxes

    Ogris, D. M., Michelic, S. K. & Gamsjäger, E., 8 Jul 2024, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 55.2024, 5, p. 3451-3463 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Materials science-based guidelines to develop robust hard thin film materials

    Mayrhofer, P. H., Clemens, H. & Fischer, F.-D., 3 Jun 2024, In: Progress in materials science. 146.2024, December, 57 p., 101323.

    Research output: Contribution to journal › Review article › peer-review

  12. Published

    Extended Regression Analysis for Debye–Einstein Models Describing Low Temperature Heat Capacity Data of Solids

    Gamsjäger, E. & Wiessner, M., 26 May 2024, In: Entropy. 26.2024, 6, 16 p., 452.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Modeling solute drag during austenite–ferrite transformation with ab initio binding energies

    Bloder, B. F., Scheiber, D., Raninger, P., Ecker, W. & Antretter, T., 17 May 2024, In: Materialia. 36.2024, August, 9 p., 102128.

    Research output: Contribution to journal › Article › Research › peer-review

  14. E-pub ahead of print

    Investigation of probable squat growth from initial surface cracks in rails using a three-dimensional rollover simulation

    Gschwandl, T. J., Antretter, T., Künstner, D., Scheriau, S. & Daves, W., 29 Apr 2024, (E-pub ahead of print) In: Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit. 238.2024, 4, p. 406-413 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Multi-physical simulation of an inductive heat treatment process on 50CrMo4 steel rods and validation by HEXRD cross-sectional measurements

    Mevec, D. G., Raninger, P., Jászfi, V., Prevedel, P. & Antretter, T., 15 Apr 2024, In: Materialia. 34.2024, May, 102094.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    On the coupling of Hamilton's principle and thermodynamic extremal principles

    Hackl, K., Svoboda, J. & Fischer, F.-D., 30 Mar 2024, In: Journal of the mechanics and physics of solids. 187.2024, June, 8 p., 105633.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    A note concerning some aspects for application of a thermodynamic extremal principle (TEP) for continua

    Fischer, F.-D., Zickler, G., Hackl, K. & Svoboda, J., 9 Mar 2024, In: Acta mechanica. 235.2024, 5, p. 3309-3312 4 p.

    Research output: Contribution to journal › Comment/debate › peer-review

  18. Published

    Multiscale in-situ observations of the micro- and nanostructure of a PH 13-8 Mo maraging steel during austenitization

    Rosenauer, A., Brandl, D., Ressel, G., Hönigmann, T., Stadler, M., Turk, C., Gammer, C., Wiessner, M., Gamsjäger, E., Stockinger, M. & Schnitzer, R., Feb 2024, In: Materials characterization. 208.2024, February, 13 p., 113554.

    Research output: Contribution to journal › Article › Research › peer-review

  19. E-pub ahead of print

    Numerical and experimental assessment of liquid metal embrittlement in externally loaded spot welds

    Prabitz, K. M., Antretter, T., Rethmeier, M., El-Sari, B., Schubert, H., Hilpert, B., Gruber, M., Sierlinger, R. & Ecker, W., 30 Jan 2024, (E-pub ahead of print) In: Welding in the world. 68.2024, 10, p. 2713-2722 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    A Chemo-Mechanically Coupled Model for the Prediction of Phase Segregation and Pore Formation in Microelectronic Solders

    Antretter, T., 7 Jan 2024.

    Research output: Contribution to conference › Presentation › Research › peer-review

  21. Published

    A comprehensive methodology for criticality assessment of microvias in printed circuit board assemblies

    Kamble, V. G., Patel, D. R., Schipfer, C., Thalhamer, A., Zuendel, J., Krivec, T., Antretter, T. & Fuchs, P. F., 2024, 2024 25th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2024. Institute of Electrical and Electronics Engineers, (2024 25th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2024).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. Published

    Creating a Multiphase Production Model Tailored to Deviated Oil-Producing Wells for Integration as Input into a Machine Learning Model for ESP Survival Analysis

    Sindi, W., Fruhwirth, R., Gamsjäger, E. & Hofstätter, H., 2024, Society of Petroleum Engineers - SPE Canadian Energy Technology Conference and Exhibition, CET 2024. Society of Petroleum Engineers , (Society of Petroleum Engineers - SPE Canadian Energy Technology Conference and Exhibition, CET 2024).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  23. Published

    Exploring the Impact of Laser Drilling on Material Thermal Decomposition: A Computational Study Using KratosMultiphysics

    Peng, C., Tao, Q., Krivec, T., Casas, G., Latorre, S., Antretter, T., Macher, J. & Fuchs, P., 2024, 2024 25th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2024. Institute of Electrical and Electronics Engineers, (2024 25th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2024).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. Published

    Finite element analysis of heat transfer in ski presses

    Hösele, L., 2024

    Research output: Thesis › Master's Thesis

  25. Published

    Mean-Field-Model Development for Void Formation in SAC305-Solder Bumps

    Huber, A., 2024

    Research output: Thesis › Master's Thesis

  26. Published

    Parametrization of a numerical model for rolling contact calculations

    Otipka, D., 2024

    Research output: Thesis › Master's Thesis

  27. Published

    Untersuchung des Rissverhaltens von Squats unterhalb der Schienenoberfläche

    Avgustinovic, D., 2024

    Research output: Thesis › Master's Thesis

  28. 2023
  29. Published

    Impact crusher kinematics: The dynamics of an impact swing mechanism as an analytical-mathematical model

    Kemper, D., Fimbinger, E., Antretter, T., Egger, M. & Flachberger, H., 20 Dec 2023, In: Results in Engineering. 21.2024, March, p. 101694 13 p., 101694.

    Research output: Contribution to journal › Article › Research › peer-review

  30. E-pub ahead of print

    Numerical treatment of reactive diffusion using the discontinuous Galerkin method

    Flachberger, W., Svoboda, J., Antretter, T., Petersmann, M. & Leitner, S., 13 Oct 2023, (E-pub ahead of print) In: Continuum Mechanics and Thermodynamics. 36.2024, January, p. 61-74 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    A breakage model for DEM based on a probabilistic particle replacement with Voronoi fragments

    Denzel, M., Prenner, M., Sifferlinger, N. A. & Antretter, T., 17 Aug 2023, In: Minerals engineering. 203.2023, November, 14 p., 108328.

    Research output: Contribution to journal › Article › Research › peer-review

  32. E-pub ahead of print

    A breakage model for DEM based on a probabilistic particle replacement with Voronoi fragments

    Denzel, M., Prenner, M., Sifferlinger, N. A. & Antretter, T., 17 Aug 2023, (E-pub ahead of print) In: Minerals engineering. 203.2023, November, 14 p., 108328.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    A note on maxima and minima of dissipation in context of treatment of irreversible thermodynamic systems by application of Extremal Principles

    Svoboda, J., Hackl, K. & Fischer, F.-D., Aug 2023, In: Scripta Materialia. 233.2023, August, 5 p., 115519.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Variational formulation of Cahn–Hilliard-type diffusion coupled with crystal plasticity

    Gaddikere Nagaraja, S., Flachberger, W. & Antretter, T., Aug 2023, In: International journal of plasticity. 167.2023, August, 22 p., 103652.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Experimental and Numerical Visualisation of Subsurface Rail Deformation in a Full-Scale Wheel–Rail Test Rig

    Gschwandl, T. J., Weniger, T. M., Antretter, T., Künstner, D., Scheriau, S. & Daves, W., Jun 2023, In: Metals. 13.2023, 6, 18 p., 1089.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Cyclic Solid-Liquid Phase Transformations in the CaO – SiO 2 System—Experiments and Modelling

    Ogris, D., Kircher, V. & Gamsjäger, E., 19 Apr 2023, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 54.2023, June, p. 1555-1564 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Residual Stress Evolution in Low-Alloyed Steel at Three Different Length Scales

    Leitner, S., Winter, G., Klarner, J., Antretter, T. & Ecker, W., 23 Mar 2023, In: Materials. 16.2023, 7, 17 p., 2568.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Fully coupled segregation and precipitation kinetics model with ab initio input for the Fe-Au system

    Scheiber, D., Svoboda, J., Fischer, F.-D., Böhm, H. J. & Romaner, L., 1 Jan 2023, In: Acta materialia. 244.2023, 1 January, 11 p., 118577.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    A method to reduce computation time in finite element simulations of deep rolling

    Bialowas, J., Pletz, M., Gapp, S. & Maierhofer, J., 2023, In: Procedia Structural Integrity. 46, p. 49-55 7 p.

    Research output: Contribution to journal › Conference article › peer-review

  40. Published

    Experimental and numerical investigation of the phenomenon squats in rails

    Gschwandl, T. J., 2023

    Research output: Thesis › Doctoral Thesis

  41. Published

    Finite element investigation of packing rings

    Ruetz, M., 2023

    Research output: Thesis › Master's Thesis

  42. Published

    Implementation of the Heterosegmental PC-SAFT Approach

    Gessl, C., 2023

    Research output: Thesis › Master's Thesis

  43. Published

    Investigation of plastic deformation in wheel-rail contact in differently heat-treated rail materials

    Samardzic, D., 2023

    Research output: Thesis › Master's Thesis

  44. Published

    On the road towards understanding squats: residual stress state of rails

    Gschwandl, T. J., Daves, W., Antretter, T., Bucher, C. & Künstner, D., 2023, In: Procedia Structural Integrity. 46, p. 17-23 7 p.

    Research output: Contribution to journal › Conference article › peer-review

  45. Published

    Oxide particle dissolution in oxide melts during steel production: In-situ experiments and models

    Eru, O., 2023

    Research output: Thesis › Master's Thesis

  46. Published

    Process Models for the Manufacturing of Railway Components

    Bialowas, J., 2023

    Research output: Thesis › Doctoral Thesis

  47. Published

    Production Optimization Using Integrated Modelling and ESP Survival Analysis Based on Historical Data

    Sindi, W., Fruhwirth, R., Gamsjäger, E. & Hofstätter, H., 2023, Society of Petroleum Engineers - ADIPEC, ADIP 2023. Society of Petroleum Engineers , (Society of Petroleum Engineers - ADIPEC, ADIP 2023).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  48. Published

    Prozessoptimierung mittels multiphysikalischer Modellierung des Widerstandspunktschweißens

    Prabitz, K., Antretter, T., Schubert, H., Hilpert, B., Gruber, M., Sierlinger, R., Polcik, P. & Ecker, W., 2023, XLI. Verformungskundliches Kolloquium.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  49. Published

    Simulation of the mechanical response of the individual intermetallic phases in multi-phase γ titanium aluminides

    Seligmann, B., Spörk-Erdely, P. & Antretter, T., 2023.

    Research output: Contribution to conference › Poster › Research

  50. Published

    Solid/liquid phase transformations in multi-component slags

    Ogris, D. M. & Gamsjäger, E., 2023.

    Research output: Contribution to conference › Poster › Research

  51. Published

    Thermodynamic and kinetic modelling of solid-liquid phase transformations in multi-component slag systems

    Ogris, D., 2023

    Research output: Thesis › Doctoral Thesis

  52. 2022
  53. Published

    On shape forming by contractile filaments in the surface of growing tissues

    Fratzl, P., Fischer, F.-D., Zickler, G. & Dunlop, J. W. C., 12 Dec 2022, In: PNAS Nexus. 2.2023, 1, 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    A Technology-Enhanced ‘Assessment System for Teaching and Assessment using a Computer Algebra Kernel’ (STACK): The Best Contributions of 2022’s STACK Community Meeting at the Montanuniversitaet Leoben, Austria

    Orthaber, M. & Antretter, T., 8 Dec 2022, In: International journal emerging technologies in learning : iJET. 17.2022, 23, p. 4-6 3 p.

    Research output: Contribution to journal › Article › Research › peer-review

  55. Published

    Towards virtually optimized curing cycles for polymeric encapsulations in microelectronics

    Schipfer, C., Gschwandl, M., Fuchs, P., Antretter, T., Feuchter, M., Morak, M., Tao, Q. & Schingale, A., Dec 2022, In: Microelectronics Reliability. 139.2022, December, 9 p., 114799.

    Research output: Contribution to journal › Article › Research › peer-review

  56. Published

    Crack path investigations in a pearlitic rail steel after pre-deformation under cyclic Mode-II loading

    Schnalzger, G., Daves, W., Pippan, R., Maierhofer, J. & Hohenwarter, A., Oct 2022, In: Engineering Failure Analysis. 140.2022, October, 14 p., 106567.

    Research output: Contribution to journal › Article › Research › peer-review

  57. Published

    Generalization of classical Hillert's grain growth and LSW theories to a wide family of kinetic evolution equations and stationary distribution functions

    Svoboda, J., Zickler, G., Kozeschnik, E. & Fischer, F.-D., 15 Aug 2022, In: Acta Materialia. 235.2022, 15 August, 9 p., 118085.

    Research output: Contribution to journal › Article › Research › peer-review

  58. Published

    Thermodynamic trapping and diffusion model for multiple species in systems with multiple sorts of traps

    Leitner, S., Ecker, W., Fischer, F.-D. & Svoboda, J., Jul 2022, In: Acta Materialia. 233.2022, July, 10 p., 117940.

    Research output: Contribution to journal › Article › Research › peer-review

  59. E-pub ahead of print

    Towards electro-thermo-mechanical lifetime assessment for arbitrary power electronics

    Gschwandl, M., Friedrich, B. E., Pfost, M., Antretter, T., Fuchs, P. F., Mitev, I., Tao, Q. & Schingale, A., 4 May 2022, (E-pub ahead of print) In: Microelectronics Reliability. 133.2022, June, 9 p., 114537.

    Research output: Contribution to journal › Article › Research › peer-review

  60. Published

    Evolution of chemically induced cracks in alkali feldspar: thermodynamic analysis

    Abart, R., Petrishcheva, E., Habler, G., Sutter, C., Fischer, F.-D., Predan, J., Kegl, M. & Rammerstorfer, F. G., 3 May 2022, In: Physics and Chemistry of Minerals. 49.2022, 14, 15 p., 14.

    Research output: Contribution to journal › Article › Research › peer-review

  61. E-pub ahead of print

    Numerical Treatment of Oxide Particle Dissolution in Multicomponent Slags with Local Gibbs Energy Minimization

    Ogris, D. M. & Gamsjäger, E., 19 Apr 2022, (E-pub ahead of print) In: Steel research international. 93.2022, 8, 11 p., 2200056.

    Research output: Contribution to journal › Article › Research › peer-review

  62. Published

    Erratum to “Energetic balance and kinetics for the decomposition of supersaturated Ti1-xAlxN” [Acta Materialia 55 (2007) 1441–1446]

    Mayrhofer, P. H., Fischer, F.-D., Böhm, H. J., Mitterer, C. & Schneider, J. M., 1 Apr 2022, In: Acta Materialia. 227.2022, 1 April, 1 p., 117741.

    Research output: Contribution to journal › Letter › peer-review

  63. Published

    Strain and interface energy of ellipsoidal inclusions subjected to volumetric eigenstrains: shape factors

    Böhm, H. J., Zickler, G. A., Fischer, F.-D. & Svoboda, J., Jan 2022, In: Archive of applied mechanics. 92.2022, ?, p. 405-411 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  64. Published

    Characterization and modeling of a typical curing material for photoresist films

    Peng, C., Morak, M., Thalhamer, A., Gschwandl, M., Fuchs, P., Tao, Q., Krivec, T., Antretter, T. & Celigueta, M. A., 2022, 2022 23rd International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2022. Institute of Electrical and Electronics Engineers, (2022 23rd International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2022).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  65. Published

    Computerassisted Thermodynamics: From Gibbs energy minimizers to neural networks

    Schatzl, D., 2022

    Research output: Thesis › Master's Thesis

  66. Published

    Condition Monitoring and Damage Prediction in Railway Applications

    Velic, D., 2022

    Research output: Thesis › Doctoral Thesis

  67. Published

    Cyclic partial phase transformations in CaO-SiO2 slags

    Ogris, D. M., Kircher, V. & Gamsjäger, E., 2022.

    Research output: Contribution to conference › Presentation › Research › peer-review

  68. Published

    Finite element analysis of polymer based cylinder rings of piston compressors

    Ruetz, M., 2022

    Research output: Thesis › Master's Thesis

  69. Published

    Influence of the mobilities of triple junctions and grain boundaries on the kinetics of grain growth

    Gamsjäger, E. & Svoboda, J., 2022.

    Research output: Contribution to conference › Presentation › Research › peer-review

  70. Published

    Material assessment tool for railway crossing components

    Schnalzger, G., 2022

    Research output: Thesis › Doctoral Thesis

  71. Published

    Modelling of lime dissolution in BOF slags using Gibbs energy minimization

    Ogris, D. M. & Gamsjäger, E., 2022.

    Research output: Contribution to conference › Presentation › Research › peer-review

  72. Published

    Multi-physical modelling of resistance spot welding with assessing the risk of liquid metal embrittlement

    Prabitz, K., 2022

    Research output: Thesis › Doctoral Thesis

  73. Published

    Novel microalloying and electrode solutions to avoid liquid metal embrittlement during resistance spot welding of galvanized DP1200HD steel

    Prabitz, K. M., 2022, Steels in Cars and Trucks.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  74. Published

    Polycrystal diffraction elastic constants of advanced γ-TiAl based sheets

    Obersteiner, D., Staron, P., Maawad, E., Ambig, A., Hatzenbichler, L., Holec, D. & Spörk-Erdely, P., 2022.

    Research output: Contribution to conference › Poster › Research

  75. Published

    Simulation-Based Approaches for Optimized Tap-Hole Design

    Unterreiter, G., Ishmurzin, A., Marschall, H. U. & Spanring, A., 2022, Furnace Tapping 2022.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  76. Published

    Thermodynamic functions of crystalline solids: Statistical evaluation of experimental data

    Gamsjäger, E., Loridant, B. & Wiessner, M., 2022.

    Research output: Contribution to conference › Presentation › Research › peer-review

  77. 2021
  78. Published

    A comparison of theory and simulation with microgravity experiments on phase coarsening

    Wang, K. G., Wang, G. Q., Gamsjäger, E. & Glicksman, M. E., Dec 2021, In: Acta Materialia. 221, 117402.

    Research output: Contribution to journal › Article › Research › peer-review

  79. Published

    Heat capacities and standard entropies and enthalpies of some compounds essential for steelmaking and refractory design approximated by Debye-Einstein integrals

    Ogris, D. M. & Gamsjäger, E., Dec 2021, In: Calphad: Computer Coupling of Phase Diagrams and Thermochemistry. 75.2021, December, 15 p., 102345.

    Research output: Contribution to journal › Article › Research › peer-review

  80. Published

    Liquid Metal Embrittlement of Advanced High Strength Steel: Experiments and damage modeling

    Prabitz, K., Asadzadeh, M. Z., Pichler, M., Antretter, T., Beal, C., Schubert, H., Hilpert, B., Gruber, M., Sierlinger, R. & Ecker, W., 21 Sept 2021, In: Materials. 14.2021, 18, 15 p., 5451.

    Research output: Contribution to journal › Article › Research › peer-review

  81. Published

    Validated multi-physical finite element modelling of the spot welding process of the advanced high strength steel dp1200hd

    Prabitz, K., Pichler, M., Antretter, T., Schubert, H., Hilpert, B., Gruber, M., Sierlinger, R. & Ecker, W., 18 Sept 2021, In: Materials. 14.2021, 18, 19 p., 5411.

    Research output: Contribution to journal › Article › Research › peer-review

  82. Published

    An atomistic view on Oxygen, antisites and vacancies in the γ-TiAl phase

    Razumovskiy, V. I., Ecker, W., Wimler, D., Fischer, F.-D., Appel, F., Mayer, S. & Clemens, H., Sept 2021, In: Computational materials science. 197.2021, September, 8 p., 110655.

    Research output: Contribution to journal › Article › Research › peer-review

  83. Published

    Characterization of high speed steels – In-situ experimental data and their evaluation supported by machine learning algorithms

    Gamsjäger, E. & Wießner, M., Sept 2021.

    Research output: Contribution to conference › Presentation › Research › peer-review

  84. Published

    Surface stress of gold nanoparticles revisited

    Holec, D., Löfler, L., Zickler, G., Vollath, D. & Fischer, F.-D., 1 Aug 2021, In: International journal of solids and structures. 224.2021, 1 August, p. 1-13 13 p., 111044.

    Research output: Contribution to journal › Article › Research › peer-review

  85. Published

    Ductile failure modelling in pre-cracked solids using coupled fracture locus theory

    Baltic, S., Magnien, J., Kolitsch, S., Gänser, H.-P., Antretter, T. & Hammer, R., Jul 2021, In: Engineering Fracture Mechanics. 252.2021, July, 13 p., 107845.

    Research output: Contribution to journal › Article › Research › peer-review

  86. Published

    MUL 4.0 – Digitalisierung der Wertschöpfungskette vom Rohmaterial bis hin zum Recycling

    Woschank, M., Ralph, B. J., Kaiblinger, A., Miklautsch, P., Pacher, C., Sorger, M., Zsifkovits, H., Stockinger, M., Pogatscher, S., Antretter, T. & Antrekowitsch, H., 2 Jun 2021, In: Berg- und hüttenmännische Monatshefte : BHM. 166, 6, p. 309-313

    Research output: Contribution to journal › Article › Research › peer-review

  87. Published

    Evaluation of Cement-Casing & Cement-Rock Bond Integrity during Well Operations.

    Lamik, A., Thonhauser, G., Ravi, K., Prohaska-Marchried, M., Pittino, G. & Antretter, T., 27 May 2021, p. 1-13. 13 p.

    Research output: Contribution to conference › Paper › peer-review

  88. Published

    Machine learning assisted calibration of a ductile fracture locus model

    Baltic, S., Asadzadeh, M. Z., Hammer, P., Magnien, J., Gänser, H. P., Antretter, T. & Hammer, R., May 2021, In: Materials and Design. 203.2021, May, 15 p., 109604.

    Research output: Contribution to journal › Article › Research › peer-review

  89. Published

    Electro-Thermo-Mechanical Reliability Assessment of Arbitrary Power Electronics

    Gschwandl, M., Pfost, M., Antretter, T., Fuchs, P. F., Mitev, I., Tao, Q. & Schingale, A., 19 Apr 2021, 2021 22nd International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2021. Institute of Electrical and Electronics Engineers, 9410862. (2021 22nd International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2021).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  90. Published

    Prediction of Curing Induced Residual Stresses in Polymeric Encapsulation Materials for Microelectronics

    Schipfer, C., Gschwandl, M., Fuchs, P., Antretter, T., Feuchter, M., Morak, M., Tao, Q. & Schingale, A., 19 Apr 2021, 2021 22nd International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2021. Institute of Electrical and Electronics Engineers, 9410855. (2021 22nd International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2021).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  91. Published

    Role of elastic strain energy in spheroidal precipitates revisited

    Böhm, H. J., Zickler, G., Fischer, F.-D. & Svoboda, J., Apr 2021, In: Mechanics of materials. 155, April, 6 p., 103781.

    Research output: Contribution to journal › Article › Research › peer-review

  92. Published

    Solutions of critical raw materials issues regarding iron-based alloys

    Novák, P., Bellezze, T., Cabibbo, M., Gamsjäger, E., Wießner, M., Rajnovic, D., Jaworska, L., Hanus, P., Shishkin, A., Goel, G. & Goel, S., 2 Feb 2021, In: Materials. 14, 4, p. 1-36 36 p., 899.

    Research output: Contribution to journal › Review article › peer-review

  93. Published

    Analysis of shape, orientation and interface properties of Mo2C precipitates in Fe using ab-initio and finite element method calculations

    Leitner, S., Scheiber, D., Dengg, T., Spitaler, J., Antretter, T. & Ecker, W., 1 Feb 2021, In: Acta materialia. 204.2021, 1 February, 11 p., 116478.

    Research output: Contribution to journal › Article › Research › peer-review

  94. Published

    Thermal and Moisture Dependent Material Characterization and Modeling of Glass Fibre Reinforced Epoxy Laminates

    Yalagach, M., Fuchs, P., Antretter, T., Feuchter, M., Tao, Q. & Weber, M., 29 Jan 2021, In: Sensors & transducers. 248.2021, 1, 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  95. Published

    Alle(s) digital im Studium?! Projektbericht der Steirischen Hochschulkonferenz zur Analyse digitaler Kompetenzen von Studienanfänger*inne*n

    Orthaber, M. (Editor), Janschitz, G. (Editor), Monitzer, S. (Editor), Archan, D. (Editor), Dreisiebner, G. (Editor), Ebner, M. (Editor), Hye, F. (Editor), Kopp, M. (Editor), Mossböck, C. (Editor), Nagler, W. (Editor), Rechberger, M. (Editor), Rehatschek, H. (Editor), Slepcevic-Zach, P. (Editor), Stock, M. (Editor), Swoboda, B. (Editor) & Teufel, M. (Editor), 2021, Graz. 137 p.

    Research output: Book/Report › Commissioned report › Research

  96. Published

    Characterization of high speed steels _ In situ experimental data and their evaluation supported by machine learning algorithms

    Gamsjäger, E. & Wiessner, M., 2021.

    Research output: Contribution to conference › Paper › peer-review

  97. Published

    Computational assessment of damage in switch rails by means of dynamic FE-analyses and a new material assessment software

    Gapp, S., 2021

    Research output: Thesis › Master's Thesis

  98. Published

    Damage and Fracture in Aluminum Structures

    Baltic, S., 2021

    Research output: Thesis › Doctoral Thesis

  99. Published

    Einfluss der Mobilitäten der Tripelpunkte und Korngrenzen auf die Kinetik des Kornwachstums

    Gschöpf, B., 2021

    Research output: Thesis › Master's Thesis

  100. Published

    Fatigue crack growth of deformed pearlitic rail steels under multiaxial loading

    Schnalzger, G., Maierhofer, J., Daves, W., Pippan, R. & Hohenwarter, A., 2021, In: Procedia Structural Integrity. 39, C, p. 313-326 14 p.

    Research output: Contribution to journal › Conference article › peer-review

  101. Published

    FE-Simulation zur Vorhersage von Phasenspannungen mit dem Ziel der Vermeidung von Härterissen während der Wärmebehandlung

    Posch, C., 2021

    Research output: Thesis › Master's Thesis

  102. Published

    Fundamentals and prevention of zinc induced embrittlement in steel sheets during the direct press hardening process

    Tomasch, M., 2021

    Research output: Thesis › Doctoral Thesis

  103. Published

    Gibbs energy minimization and particle dissolution

    Ogris, D., Schenk, J. & Gamsjäger, E., 2021.

    Research output: Contribution to conference › Presentation › Research › peer-review

  104. Published

    Investigating the possibility to solve the Hamilton-Jacobi-Bellman Equation by the Finite Element Method to enable feedback control of nonlinear dynamical systems

    Flachberger, W., 2021

    Research output: Thesis › Master's Thesis

  105. Published

    Kinetically constrained Gibbs energy minimization applied to particle dissolution

    Ogris, D. M. & Gamsjäger, E., 2021.

    Research output: Contribution to conference › Presentation › Research › peer-review

  106. Published

    Numerical model for predicting liquid metal cracking during resistance spot welding of advanced high strength steels

    Prabitz, K. M., 2021, 12th International Conference on Zinc & Zinc Alloy Coated Steel Sheet - Galvatech.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  107. Published

    Simulation der thermischen Belastung blockgebremster Eisenbahnräder

    Scheinast, D., 2021

    Research output: Thesis › Master's Thesis

  108. Published

    Thermodynamic and kinetic modelling of the dissolution process of lime particles in BOF slags

    Ogris, D. M., Schenk, J. & Gamsjäger, E., 2021.

    Research output: Contribution to conference › Paper › peer-review

  109. Published

    Virtual System Evaluation of High Sensitive Pressure Sensor in Interaction with Printed Circuit Boards

    Veerappa Yalagach, M., 2021

    Research output: Thesis › Doctoral Thesis

  110. Published

    Wärmebehandlungssimulation von massiven Werkzeugen

    Schemmel, M., 2021

    Research output: Thesis › Doctoral Thesis

  111. 2020
  112. Published

    Transient phase fraction and dislocation density estimation from in-situ X-ray diffraction data with a low signal-to-noise ratio using a Bayesian approach to the Rietveld analysis

    Wiessner, M., Angerer, P., van der Zwaag, S. & Gamsjäger, E., 25 Dec 2020, In: Materials characterization. 172.2021, February, 9 p., 110860.

    Research output: Contribution to journal › Article › Research › peer-review

  113. Published

    Numerical analysis of a MEMS sensor's deformation behavior considering dynamic moisture conditions

    Yalagach, M., Fuchs, P. F., Antretter, T., Qi, T. & Weber, M., 2 Dec 2020, 2020 IEEE 22nd Electronics Packaging Technology Conference, EPTC 2020. Institute of Electrical and Electronics Engineers, p. 380-385 6 p. 9315091. (2020 IEEE 22nd Electronics Packaging Technology Conference, EPTC 2020).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  114. Published

    On the treatment of non-reciprocal rate-independent kinetics via thermodynamic extremal principles

    Hackl, K., Fischer, F.-D. & Svoboda, J., Dec 2020, In: Journal of the mechanics and physics of solids. 145, p. 104149-1-7 7 p., 104149.

    Research output: Contribution to journal › Article › Research › peer-review

  115. Published

    Coupled damage variable based on fracture locus: Prediction of ductile failure in a complex structure

    Baltic, S., Magnien, J., Gänser, H.-P., Antretter, T. & Hammer, R., 23 Oct 2020, In: International journal of solids and structures. 207.2020, December, p. 132-144 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  116. Published

    Too much to ask for oder Wie ein Moodle Server bei laufender Prüfung in die Knie gezwungen wird

    Orthaber, M. & Antretter, T., 8 Oct 2020, <fnma> Magazin 03|2020. Graz, Vol. 03/2020.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Education

  117. Published

    On an alternative approach for simulating chemically induced crack pattern evolutions in a single crystal

    Predan, J., Kegl, M., Abart, R., Fischer, F.-D. & Rammerstorfer, F. G., 1 Oct 2020, In: International journal of solids and structures. 202, p. 575-586 12 p., 202.

    Research output: Contribution to journal › Article › Research › peer-review

  118. Published

    Cycled hydrogen permeation through Armco iron – A joint experimental and modeling approach

    Drexler, A., Siegl, W., Ecker, W., Tkadletz, M., Klösch, G., Schnideritsch, H., Mori, G. K., Svoboda, J. & Fischer, F.-D., 23 Sept 2020, In: Corrosion science. 176.2020, November, 11 p., 109017.

    Research output: Contribution to journal › Article › Research › peer-review

  119. Published

    Evolution of a generic two-dimensional grain structure as a model for grain growth in microalloyed steels

    Gamsjäger, E. & Svoboda, J., 22 Sept 2020.

    Research output: Contribution to conference › Presentation › Research › peer-review

  120. Published

    Constraints in thermodynamic extremal principles for non-local dissipative processes

    Hackl, K., Fischer, F.-D. & Svoboda, J., 1 Sept 2020, In: Continuum Mechanics and Thermodynamics. 32, 5, p. 1337-1345 9 p., 32.

    Research output: Contribution to journal › Article › Research › peer-review

  121. Published

    Modelling of short-range ordering kinetics in dilute multicomponent substitutional solid solutions

    Svoboda, J., Holec, D., Popov, M., Zickler, G. & Fischer, F.-D., 2 Aug 2020, In: Philosophical magazine. 100.2020, 15, p. 1942-1961 20 p.

    Research output: Contribution to journal › Article › Research › peer-review

  122. Published

    EXAM-ON-DEMAND: SCHRIFTLICHE ONLINE-PRÜFUNGEN ALS ANTWORT AUF DEN LOCKDOWN

    Orthaber, M. & Antretter, T., 31 Jul 2020, fnma Magazin 02/2020 - E-Assessment und E-Examinations . Graz, Vol. 02/2020. p. 47 - 49 3 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Education

  123. Published

    Concepts for E-Assessments in STEM on the Example of Engineering Mechanics: How to Assess Complex EngineeringProblemsElectronically

    Orthaber, M., Stütz, D., Antretter, T. & Ebner, M., 26 Jun 2020, In: International journal emerging technologies in learning : iJET. 15.2020, 12, p. 136-152 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  124. Published

    Local approach for coarsening of precipitates

    Svoboda, J., Shan, Y. V., Zickler, G. A., Kozeschnik, E. & Fischer, F.-D., 15 Mar 2020, In: Scripta materialia. 178.2020, 15 March, p. 232-235 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  125. Published

    Surface Energy of Au Nanoparticles Depending on Their Size and Shape

    Holec, D., Dumitraschkewitz, P., Vollath, D. & Fischer, F.-D., 8 Mar 2020, In: Nanomaterials. 10.2020, 3, p. 1-15 15 p., 484.

    Research output: Contribution to journal › Article › Research › peer-review

  126. Published

    Influence of Finite Mobilities of Triple Junctions on the Grain Morphology and Kinetics of Grain Growth

    Gamsjäger, E., Gschöpf, B. & Svoboda, J., 27 Jan 2020, In: Metals : open access journal . 10.2020, 18 p., 185.

    Research output: Contribution to journal › Article › Research › peer-review

  127. Published

    Model-Based Residual Stress Design in Multiphase Seamless Steel Tubes

    Leitner, S., Winter, G., Klarner, J., Antretter, T. & Ecker, W., 16 Jan 2020, In: Materials. 13.2020, 2, 12 p., 439.

    Research output: Contribution to journal › Article › Research › peer-review

  128. Published

    On solute depletion zones along grain boundaries during segregation

    Scheiber, D., Jechtl, T., Svoboda, J., Fischer, F.-D. & Romaner, L., 1 Jan 2020, In: Acta materialia. 182.2022, 1 January, p. 100-107 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  129. Published

    A Modeling Framework for Enhanced Reliability of Printed Circuit Boards and Power Electronics

    Gschwandl, M., 2020

    Research output: Thesis › Doctoral Thesis

  130. Published

    Bewertung numerischer Methoden für die Simulation von induktivem Erwärmen von Maschinenbauteilen

    Gschwentner, A., 2020

    Research output: Thesis › Master's Thesis

  131. Published

    Crossings – Deformation, Damage and Optimization

    Wiedorn, J., 2020

    Research output: Thesis › Doctoral Thesis

  132. Published

    Dilatometer experiments to determine the phase transformation kinetics and TRIP behavior for predeformed 20MnB8 steel sheets

    Tomasch, M., Ecker, W., Antretter, T. & Stockinger, M. (Publisher), 2020, XXXIX. Verformungskundliches Kolloquium, Tagungsband. Vol. 39. p. 72-77

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  133. Published

    Numerical analysis of a high speed large engine connecting rod

    Gschwandl, T. J., 2020

    Research output: Thesis › Master's Thesis

  134. Published

    Numerical Simulation of Crack Propagation during the Deformation of Galvanized PHS Sheets

    Hammer, P. J., 2020

    Research output: Thesis › Master's Thesis

  135. Published

    Residual stress evolution in low-alloyed seamless steel tubes: A simulation based approach on three different length scales

    Leitner, S., 2020

    Research output: Thesis › Doctoral Thesis

  136. 2019
  137. Published

    Constitutive modeling of anisotropic plasticity with application to fiber-reinforced composites

    Nagaraja, S. G., Pletz, M. & Schuecker, C., 15 Dec 2019, In: International journal of solids and structures. 180-181.2019, 15 December, p. 84-96 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  138. E-pub ahead of print

    The Emergence of Complexity from a Simple Model for Tissue Growth

    Dunlop, J. W. C., Zickler, G., Weinkamer, R., Fischer, F.-D. & Fratzl, P., 14 Dec 2019, (E-pub ahead of print) In: Journal of statistical physics. 2019, December, p. 1-15 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  139. Published

    Coupled damage variable based on fracture locus: Modelling and calibration

    Baltic, S., Magnien, J., Gänser, H.-P., Antretter, T. & Hammer, R., 23 Nov 2019, In: International journal of plasticity. 126.2020, March, 24 p., 102623.

    Research output: Contribution to journal › Article › Research › peer-review

  140. Published

    E-ASSESSMENT IN ENGINEERING MECHANICS: HOW DOES IT COMPARE TO CLASSICAL PAPER-PENCIL EXAMS?

    Orthaber, M., Antretter, T., Jurisits, R. & Schemmel, M., 11 Nov 2019, 12TH INTERNATIONAL CONFERENCE OF EDUCATION, RESEARCH AND INNOVATION (ICERI2019). p. 9381-9390

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  141. Published

    EXPERIENCES WITH A BLENDED LEARNING CONCEPT IN A FIRST YEAR ENGINEERING MECHANICS COURSE

    Orthaber, M., 11 Nov 2019, 12TH INTERNATIONAL CONFERENCE OF EDUCATION, RESEARCH AND INNOVATION (ICERI2019). p. 9229-9239

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  142. E-pub ahead of print

    Driving Forces on Dislocations - An Analytical and Finite Element Study

    Kolednik, O., Ochensberger, W., Predan, J. & Fischer, F.-D., 9 Nov 2019, (E-pub ahead of print) In: International journal of solids and structures. 190.2020, May, p. 181-198 18 p.

    Research output: Contribution to journal › Article › Research › peer-review

  143. E-pub ahead of print

    Are Onsager's reciprocal relations necessary to apply Thermodynamic Extremal Principles?

    Hackl, K., Fischer, F.-D., Zickler, G. & Svoboda, J., 8 Nov 2019, (E-pub ahead of print) In: Journal of the mechanics and physics of solids. 135.2020, February, 6 p., 103780.

    Research output: Contribution to journal › Article › Research › peer-review

  144. Published

    The creep behavior of a fully lamellar γ-TiAl based alloy

    Burtscher, M., Klein, T., Mayer, S., Clemens, H. & Fischer, F. D., 1 Nov 2019, In: Intermetallics. 114.2019, November, 9 p., 106611.

    Research output: Contribution to journal › Article › Research › peer-review

  145. Published

    Thermodynamic and mechanical stability of Ni3X-type intermetallic compounds

    Kulo, N., He, S., Ecker, W., Pippan, R., Antretter, T. & Razumovskiy, V. I., Nov 2019, In: Intermetallics. 114.2019, November, 9 p., 106604.

    Research output: Contribution to journal › Article › Research › peer-review

  146. E-pub ahead of print

    Damage tolerance of lamellar bone

    Razi, H., Predan, J., Fischer, F.-D. & Fratzl, P., 24 Oct 2019, (E-pub ahead of print) In: Bone. 130.2020, January, 7 p., 115102.

    Research output: Contribution to journal › Article › Research › peer-review

  147. Published

    Cyclic plastic deformation of rails in rolling/sliding contact –quasistatic FE calculations using different plasticity models

    Pletz, M., Meyer, K. A., Künstner, D., Scheriau, S. & Daves, W., 15 Oct 2019, In: Wear. 436-437.2019, 15 October, 10 p., 202992.

    Research output: Contribution to journal › Article › Research › peer-review

  148. Published

    Surface tension determines tissue shape and growth kinetics

    Ehrig, S., Schamberger, B., Bidan, C. M., West, A., Jacobi, C., Lam, K., Kollmannsberger, P., Petersen, A., Tomancak, P., Kommareddy, K., Fischer, F.-D., Fratzl, P. & Dunlop, J. W. C., 11 Sept 2019, In: Science Advances. 5.2019, 9, 8 p., eaav9394.

    Research output: Contribution to journal › Article › Research › peer-review

  149. Published

    Unifcation of the non-linear geometric transformation theory of martensite and crystal plasticity - Application to dislocated lath martensite in steels

    Petersmann, M., Antretter, T., Cailletaud, G., Sannikov, A., Ehlenbröker, U. & Fischer, F.-D., Aug 2019, In: International journal of plasticity. 119.2019, August, p. 140-155 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  150. Published

    Influence of misfit stress relaxation by power-law creep and plasticity on kinetics of coarsening of precipitates

    Svoboda, J., Yao, S., Kozeschnik, E. & Fischer, F.-D., 15 Jul 2019, In: Scripta materialia. 2019, Vol.168, p. 81-85 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  151. Published

    Investigation of deformation mechanisms in manganese steel crossings using FE models

    Wiedorn, J., Daves, W., Ossberger, U., Ossberger, H. & Pletz, M., 13 Jun 2019, In: Tribology International. 138.2019, October, p. 424-434 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  152. Published

    The Effect of Loading during Martensitic Transformation of a Margaging Steel after Prior Austenite Grain Size Refinement by Thermal Cycling

    Petersmann, M., Antretter, T., Sannikov, A., Sartory, B. & Ehlenbröker, U., 30 May 2019, In: Practical metallography = Praktische Metallographie. 56.2019, 6, p. 360-372 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  153. Published

    Kinetics of grain arrangements controlled by grain boundary and triple junction migration – Experiments and Modeling

    Gamsjäger, E. & Svoboda, J., 20 May 2019.

    Research output: Contribution to conference › Presentation › Research › peer-review

  154. Published

    Real-Time Measurement of Dynamic Wheel-Rail Contacts Using Ultrasonic Reflectometry

    Zhou, L., Brunskill, H., Pletz, M., Daves, W., Scheriau, S. & Lewis, R., 16 Apr 2019, In: Journal of Tribology. 141.2019, 6, 9 p., 061401.

    Research output: Contribution to journal › Article › Research › peer-review

  155. Published

    Debye-Einstein models for heat capacities of crystalline solids

    Gamsjäger, E. & Wießner, M., 8 Apr 2019.

    Research output: Contribution to conference › Presentation › Research › peer-review

  156. Published

    An improved engineering approach to assess crack arrays: an Addendum to Arch. Appl. Mech. 84 (2014) 1325–1337

    Kienzler, R., Fischer, F.-D. & Wessel, A., Apr 2019, In: Archive of applied mechanics. 89.2019, 4, p. 731 - 736 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  157. Published

    Deformation-induced phase transformation in a Co-Cr-W-Mo alloy studied by high-energy X-ray diffraction during in-situ compression tests

    Weißensteiner, I., Petersmann, M., Erdely, P., Stark, A., Antretter, T., Clemens, H. & Maier-Kiener, V., Feb 2019, In: Acta materialia. 164.2019, February, p. 272-282 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  158. Published

    A numerical modeling strategy for the damage-relevant evaluation of metrologically inaccessible thermo-mechanical milling tool loads

    Nemetz, A., 2019

    Research output: Thesis › Doctoral Thesis

  159. Published

    A Sequential Finite Volume Method / Finite Element Analysis of a Power Electronic Semiconductor Chip

    Gschwandl, M., Fuchs, P. F., Antretter, T., Pfost, M., Mitev, I., Tao, Q., Krivec, T., Schingale, A. & Decker, M., 2019, p. 1509-1514.

    Research output: Contribution to conference › Paper › peer-review

  160. Published

    Cyclic heat-up and damage-relevant substrate plastification of single- and bilayer coated milling inserts evaluated numerically

    Nemetz, A., Daves, W., Klünsner, T., Ecker, W., Schäfer, J., Czettl, C. & Antretter, T., 2019, In: Surface & coatings technology. 360.2019, February, p. 39-49 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  161. Published

    Development of a Simulation Method for the Evaluation of the Driving Dynamics of a Commercial Vehicle with Integrated E-Axle and Leaf Springs

    Bergmayr, T., 2019

    Research output: Thesis › Master's Thesis

  162. Published

    Diffusion-controlled crack propagation in alkali feldspar

    Petrishcheva, E., Rieder, M., Predan, J., Fischer, F.-D., Giester, G. & Abart, R., 2019, In: Physics and Chemistry of Minerals. 46.2019, 1, p. 15-26 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  163. Published

    Evolution of grain arrangements with finite grain boundary and triple junction mobility

    Gamsjäger, E. & Svoboda, J., 2019.

    Research output: Contribution to conference › Presentation › Research › peer-review

  164. Published

    Finite element model for predicting the initiation of subsurface damage in railway crossings—A parametric study

    Wiedorn, J., Daves, W., Ossberger, U., Ossberger, H. & Pletz, M., 2019, In: Proceedings of the Institution of Mechanical Engineers. Part F, Journal of rail and rapid transit. 2019, 6, p. Pages 614-628

    Research output: Contribution to journal › Article › Research › peer-review

  165. Published

    Improvement of the rail milling process & Evaluation of its potential for the reduction of rail defects

    Kubin, W., 2019

    Research output: Thesis › Doctoral Thesis

  166. Published

    Influence of bulk energy and triple junction mobility on interface kinetics - A tool for interpretation of experiments

    Hackl, K., Khan, A. U., Fischer, F.-D. & Svoboda, J., 2019, In: Acta materialia. 174.2019, August, p. 310-318 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  167. Published

    Kristallplastizitätsbasierte Finite Elemente Modellierung mikromechanischer Experimente

    Waldl, H., 2019

    Research output: Thesis › Master's Thesis

  168. Published

    Modelling of the post-treatment of coating/substrate architectures

    Faksa, L., 2019

    Research output: Thesis › Doctoral Thesis

  169. Published

    Multiphysics finite element simulation of resistance spot welding to evaluate liquid metal embrittlement in advanced high strength steels

    Prabitz, K. M., 2019, Mathematical Modelling of Weld Phenomena 12.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  170. Published

    Nonlinear material modeling and simulation of thermoplastics

    Morak, M. M., 2019

    Research output: Thesis › Doctoral Thesis

  171. Published

    Peak-Profilanalyse für In-situ-Hochtemperaturröntgenbeugung

    Ogris, D., 2019

    Research output: Thesis › Master's Thesis

  172. Published

    Residual stress and microstructure evolution in steel tubes for different cooling conditions – Simulation and verification

    Brunbauer, S., Winter, G., Antretter, T., Staron, P. & Ecker, W., 2019, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 747, p. 73-79

    Research output: Contribution to journal › Article › Research › peer-review

  173. Published

    Shot peening-induced plastic deformation of individual phases within a coated WC-Co hard metal composite material including WC plastification

    Faksa, L., Daves, W., Klünsner, T., Maier, K., Antretter, T., Czettl, C. & Ecker, W., 2019, In: Surface & coatings technology. 380.2019, 25 December, 11 p., 125026.

    Research output: Contribution to journal › Article › Research › peer-review

  174. Published

    Simulation des dynamischen/akustischen Verhaltens von Steuerkettentrieben

    Grinschgl, M., 2019

    Research output: Thesis › Doctoral Thesis

  175. Published

    Simulation of Phase Transformation and Material Plasticity for Press Hardening

    Tomasch, M., Ecker, W. & Antretter, T., 2019, Proceedings of NUMIFORM 2019: the 13th International Conference on Numerical Methods in Industrial Forming Processes. p. 362-365

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  176. Published

    Structure and surface energies of nanoparticles

    Holec, D., Fischer, F.-D. & Vollath, D., 2019.

    Research output: Contribution to conference › Presentation › Research › peer-review

  177. Published

    Thermally induced stress evolution in a Ti-43.5Al-4Nb-1Mo-0.1B electrode during melting in an atomization process

    Bialowas, J., 2019

    Research output: Thesis › Master's Thesis

  178. Published

    Wear of dry-running piston rod sealing rings: modelling and experiments

    Kaufmann, A., 2019

    Research output: Thesis › Doctoral Thesis

  179. 2018
  180. Published

    Crack arrest in thin metallic film stacks due to material- and residual stress inhomogeneities

    Kozic, D., Gänser, H.-P., Brunner, R., Kiener, D., Antretter, T. & Kolednik, O., 31 Dec 2018, In: Thin solid films. p. 14-22 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  181. Published

    Kinetics of interaction of impurity interstitials with dislocations revisited

    Svoboda, J., Ecker, W., Razumovskiy, V. I., Zickler, G. A. & Fischer, F.-D., Oct 2018, In: Progress in materials science. 101.2019, April, p. 172-206 35 p.

    Research output: Contribution to journal › Article › Research › peer-review

  182. Published

    The effect of loading during martensitic transformation of a maraging steel after prior austenite grain size refinement by thermal cycling

    Petersmann, M., Antretter, T. & Sannikov, A., 19 Sept 2018, Sonderbände der Praktischen Metallographie Band 52. p. 207-212 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  183. Published

    Sucker Rod String Design Optimization Using an Innovative Finite Element Simulation Approach

    Langbauer, C., Antretter, T. & Hofstätter, H., 1 Sept 2018, In: Oil gas European magazine. 44.2018, III, p. 126-132 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  184. Published

    Modelling blast fragmentation of cylinders of mortar and rock

    Iravani, A., Kukolj, I., Ouchterlony, F., Antretter, T. & Åström, J., Jun 2018, Fragblast 12: 12th International Symposium on Rock Fragmentation by Blasting. Schunnesson, H. & Johansson, D. (eds.). Luleå: Luleå Univ. of Technology, p. 597-610 15 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  185. Published

    Sucker Rod String Design Optimization using an Innovative Finite Elements Simulation Approach

    Langbauer, C., Hofstätter, H. & Antretter, T., 24 Apr 2018, NAFEMS Nordic Tagungsband 2018. p. 71-73

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  186. Published

    Sucker Rod String Design Optimization using an Innovative Finite Elements Simulation Approach

    Langbauer, C., Hofstätter, H. & Antretter, T., 19 Apr 2018, DGMK Tagungsbericht 2018. p. 227 237 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  187. Published

    Stress–strain analysis of the antiplane shear problem for an infinite cylindrical inclusion with eigenstrain: an addendum to Arch. Appl. Mech. 2018

    Fischer, F.-D., Zickler, G. A. & Svoboda, J., 2 Apr 2018, In: Archive of applied mechanics. 88.2018, 7, p. 1209-1211 3 p.

    Research output: Contribution to journal › Article › Research › peer-review

  188. Published

    Influence of accounting for translational motion of grains on grain growth kinetics and size distribution

    Svoboda, J. & Fischer, F.-D., 15 Mar 2018, In: Scripta Materialia. 146.2018, 15 March, p. 255-259 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  189. Published

    Low temperature heat capacities and thermodynamic functions described by Debye–Einstein integrals

    Gamsjäger, E. & Wießner, M., 25 Jan 2018, In: Monatshefte für Chemie = Chemical monthly. 149, p. 357-368 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  190. Published

    An innovative concept for interstitial diffusion in stressed crystals

    Svoboda, J., Zickler, G. A. & Fischer, F.-D., 2018, In: International journal of solids and structures. p. 173-180

    Research output: Contribution to journal › Article › Research › peer-review

  191. Published

    An In-Situ LSCM Study on Bainite Formation in a Fe-0.2C-1.5Mn-2.0Cr Alloy

    Sainis, S., Farahani, H., Gamsjäger, E. & van der Zwaag, S., 2018, In: Metals : open access journal . 8, 498, p. 1-22 22 p.

    Research output: Contribution to journal › Article › Research › peer-review

  192. Published

    Anisotropy of Interstitial Diffusion in bcc-crystals due to Stress-Induced Unequal Occupancies of Different Types of Sites

    Svoboda, J. & Fischer, F.-D., 2018, In: International journal of solids and structures. 152-153, p. 66-70

    Research output: Contribution to journal › Article › Research › peer-review

  193. Published

    Crystallography-microstructure-relations of hierarchical lath martensite from a micromechanical point of view

    Petersmann, M., 2018

    Research output: Thesis › Doctoral Thesis

  194. Published

    Deep drawing of press hardening steels

    Tomasch, M., Ecker, W., Kaiser, R. & Antretter, T., 2018, Journal of Physics: Conference Series. IOP Publishing Ltd., Vol. 1063. 012038

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  195. Published

    Designing nanoindentation simulation studies by appropriate indenter choices: Case study on single crystal tungsten

    Goel, S., Cross, G., Stukowski, A., Gamsjäger, E., Beake, B. & Agrawal, A., 2018, In: Computational materials science. 152, p. 196-210 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  196. Published

    Development of an automated preprocessor for the micromechanical modeling of foundry sands

    Ralph, B., 2018

    Research output: Thesis › Master's Thesis

  197. Published

    Elastic stress-strain analysis of an infinite cylindrical inclusion with eigenstrain

    Fischer, F.-D., Zickler, G. & Svoboda, J., 2018, In: Archive of applied mechanics. 88, p. 453-460

    Research output: Contribution to journal › Article › Research › peer-review

  198. Published

    Evaluation of Digital Image Correlation Techniques for the Determination of Coefficients of Thermal Expansion for Thin Reinforced Polymers

    Gschwandl, M., Frewein, M., Fuchs, P. F., Antretter, T., Pinter, G. G. & Novàk, P., 2018.

    Research output: Contribution to conference › Poster › Research

  199. Published

    Evaluation of Digital Image Correlation Techniques for the Determination of Coefficients of Thermal Expansion for Thin Reinforced Polymers

    Gschwandl, M., Frewein, M., Fuchs, P. F., Antretter, T., Pinter, G. G. & Novàk, P., 2018, EMAP 2018 Conference Proceedings. 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  200. Published

    Gradient polymer composites for optimum heat dissipation

    Marx, P., Morak, M., Gschwandl, M., Fuchs, P., Antretter, T., Pfost, M., Kern, W. & Wiesbrock, F., 2018, In: Journal of the American Chemical Society. 2, 1 p., PMSE-772.

    Research output: Contribution to journal › Meeting Abstract

  201. Published

    Grain growth controlled by grain boundary and boundary junction migration

    Ogris, D. & Gamsjäger, E., 2018.

    Research output: Contribution to conference › Poster › Research › peer-review

  202. Published

    Influene of accounting for translational motion of grains on grain growth kinetics and size distribution

    Svoboda, J. & Fischer, F.-D., 2018, In: Scripta materialia. 146, p. 225-259

    Research output: Contribution to journal › Article › Research › peer-review

  203. Published

    Kinetics of grain boundary networks controlled by triple junction and grain boundary mobility

    Gamsjäger, E., Ogris, D. & Svoboda, J., 2018, In: Metals : open access journal . 8, 977, p. 1 19 p.

    Research output: Contribution to journal › Article › Research › peer-review

  204. Published

    Kinetics of Grain Boundary Segregation in Multicomponent Systems – The Example of a Mo-C-B-O System

    Scheiber, D., Romaner, L., Fischer, F.-D. & Svoboda, J., 2018, In: Scripta materialia. 150, p. 110-114 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  205. Published

    Model Free Kinetics coupled with Finite Element Method for curing simulation of thermosetting epoxy resins

    Tao, Q., Pinter, G. G., Antretter, T., Krivec, T. & Fuchs, P., 2018, In: Journal of Applied Polymer Science. p. 1-8

    Research output: Contribution to journal › Article › Research › peer-review

  206. Published

    Modeling Dry Wear of Piston Rod Sealing Elements of Reciprocating Compressors Considering Gas Pressure Drop Across the Dynamic Sealing Surface

    Kaufmann, A., Lindner-Silwester, T. & Antretter, T., 2018, In: Journal of tribology (Transactions of the ASME).

    Research output: Contribution to journal › Article › Research › peer-review

  207. Published

    Numerical Analysis of Residual Stress and Crack Networks in CVD Multilayer Coated Cutting Tools

    Velic, D., 2018

    Research output: Thesis › Master's Thesis

  208. Published

    Surface energy of nanoparticles - influence of particle size and structures

    Vollath, D., Fischer, F.-D. & Holec, D., 2018, In: Beilstein journal of nanotechnology (Online-Ressource). 2018, 9, p. 2265-2276 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  209. Published

    The Influence of the Leveling Process on the Local Material Properties of Heavy Steel Plates

    Kaltenbrunner, T., 2018

    Research output: Thesis › Doctoral Thesis

  210. 2017
  211. Published

    Finite Element Based Optimization and Improvement of the Sucker Rod Pumping System

    Langbauer, C. & Antretter, T., 16 Nov 2017. 18 p.

    Research output: Contribution to conference › Paper › peer-review

  212. Published

    Mechanik und Thermodynamik der Werkstoffe

    Gamsjäger, E., Nov 2017.

    Research output: Contribution to conference › Poster › Research › peer-review

  213. Published

    Au55, a stable glassy cluster: results of ab initio calculations

    Vollath, D., Holec, D. & Fischer, F.-D., 25 Oct 2017, In: Beilstein journal of nanotechnology . 8.2017, p. 2221-2229 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  214. E-pub ahead of print

    Resolving alternating stress gradients and dislocation densities across AlxGa1-xN multilayer structures on Si(111)

    Reisinger, M., Tomberger, M., Zechner, J., Daumiller, I., Sartory, B., Ecker, W., Keckes, J. & Lechner, R. T., 16 Oct 2017, (E-pub ahead of print) In: Applied physics letters. 111.2017, 16, p. 162103 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  215. Published

    The effect of residual stresses and strain reversal on the fracture toughness of TiAl alloys

    Appel, F., Paul, J., Staron, P., Oehring, M., Kolednik, O., Predan, J. & Fischer, F.-D., 7 Oct 2017, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 709.2018, 2 January, p. 17-29 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  216. Published

    From microstructural characterization to mechanical properties of steels - An in-situ X-ray diffration study

    Gamsjäger, E. & Wießner, M., Jun 2017.

    Research output: Contribution to conference › Poster › Research › peer-review

  217. E-pub ahead of print

    Compressed Bi-crystal micropillars showing a sigmoidal deformation state – A computational study

    Toth, F., Kirchlechner, C., Fischer, F.-D., Dehm, G. & Rammerstorfer, F. G., 26 May 2017, (E-pub ahead of print) In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 700.2017, 17 July, p. 168-174 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  218. E-pub ahead of print

    Modelling of grain refinement driven by negative grain boundary energy

    Fischer, F.-D., Zickler, G. & Svoboda, J., 10 May 2017, (E-pub ahead of print) In: Philosophical magazine. 97.2017, 23, p. 1963-1977 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  219. Published

    Prediction and Characterization of Residual Stresses after Heat Treatment of Massive Hot Work Tool Steel Components

    Schemmel, M., Antretter, T., Ecker, W. & Prevedel, P., 19 Apr 2017.

    Research output: Contribution to conference › Presentation › Research › peer-review

  220. E-pub ahead of print

    Structure and surface energy of Au55 nanoparticles: An ab initio study

    Holec, D., Fischer, F.-D. & Vollath, D., 6 Apr 2017, (E-pub ahead of print) In: Computational materials science. 134.2017, 15 June, p. 137-144 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  221. Published

    Porenschließverhalten beim mehrdirektionalen und mehrstufigen Freiformschmieden

    Kaiser, R., Tewes, A., Wieser, V. & Antretter, T., 18 Mar 2017, XXXVI. Verformungskundliches Kolloquium: Zauchensee von 18.3 bis 22.3.2017. Leoben: Montanuniversität Leoben, Lehrstuhl für Umformtechnik, p. 134 - 139 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  222. Published

    Solutions for Critical Raw Materials under Extreme Conditions: A Review

    Grilli, M. L., Bellezze, T., Gamsjäger, E., Rinaldi, A., Novák, P., Balos, S., Piticescu, R. R. & Ruello, M. L., 17 Mar 2017, In: Materials. 10.2017, 3, 23 p., 285.

    Research output: Contribution to journal › Review article › peer-review

  223. E-pub ahead of print

    Cold pilgering of duplex steel tubes: The response of austenite and ferrite to excessive cold deformation up to high strains

    Ragger, K., Primig, S., Daniel, R., Kaiser, R., Paal, J., Mitterer, C. & Buchmayr, B., 16 Mar 2017, (E-pub ahead of print) In: Materials characterization. 128.2017, June, p. 257–268 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  224. Published

    Modeling the interplay between transformation and plasticity in low-carbon steels - A micro-level constitutive model / RVE approach

    Petersmann, M., Antretter, T., Ehlenbröcker, U. & Cailletaud, G., 27 Feb 2017.

    Research output: Contribution to conference › Poster › Research

  225. E-pub ahead of print

    Intermetallic β-Solidifying γ-TiAl Based Alloys − From Fundamental Research to Application

    Mayer, S., Erdely, P., Fischer, F.-D., Holec, D., Kastenhuber, M., Klein, T. & Clemens, H., 23 Feb 2017, (E-pub ahead of print) In: Advanced engineering materials. 19.2017, 4, 27 p., 1600735.

    Research output: Contribution to journal › Article › Research › peer-review

  226. Published

    A new approach predicting the evolution of laminated nanostructures - Martensite in NiTi as an example

    Petersmann, M., Antretter, T., Waitz, T. & Fischer, F. D., 14 Feb 2017, In: Modelling and simulation in materials science and engineering. 25.2017, February, 17 p., 035004.

    Research output: Contribution to journal › Article › Research › peer-review

  227. Published

    Calibration of phase field parameters demonstrated on kinetics of a shrinking single grain

    Fischer, F.-D., Zickler, G. & Svoboda, J., 8 Feb 2017, In: Philosophical magazine : Letters. 97.2017, 3, p. 92-100 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  228. Published

    Incorporation of vacancy generation/annihilation into reactive diffusion concept – Prediction of possible Kirkendall porosity

    Svoboda, J. & Fischer, F.-D., 1 Feb 2017, In: Computational materials science. 127.2017, 1 February, p. 136-140 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  229. Published

    An Energy Approach to Determine the Martensite Morphology in Nanocrystalline NiTi

    Petersmann, M., Pranger, W., Waitz, T. & Antretter, T., 31 Jan 2017, In: Advanced engineering materials. 19.2017, 4, 6 p., 1600684.

    Research output: Contribution to journal › Article › Research › peer-review

  230. Published

    Atomistic modelling-based design of novel materials

    Holec, D., Zhou, L., Riedl, H., Koller, C., Mayrhofer, P. H., Friák, M., Šob, M., Körmann, F., Neugebauer, J., Music, D., Hartmann, M. A. & Fischer, F.-D., 17 Jan 2017, In: Advanced engineering materials. 19.2017, 4, 19 p., 1600688.

    Research output: Contribution to journal › Article › Research › peer-review

  231. Published

    Application of Photons and Neutrons for the Characterization and Development of Advanced Steels

    Eidenberger-Schober, E., Schnitzer, R., Zickler, G., Eidenberger-Schober, M., Bischof, M., Staron, P., Leitner, H., Schreyer, A. & Clemens, H., 2017, Neutrons and Synchrotron Radiation in Engineering Materials Science : From Fundamentals to Applications. 2 ed. Wiley-VCH , p. 377-394

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  232. Published

    Austenite Grain Growth in a Microalloyed X80 Line Pipe Steel

    Tichauer, W., 2017

    Research output: Thesis › Master's Thesis

  233. Published

    A variational approach to the modelling of grooving in a three-dimensional setting

    Hackl, K., Fischer, F.-D. & Svoboda, J., 2017, In: Acta materialia. 129.2017, 1 May, p. 331-342 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  234. Published

    Beurteilung des Gefährdungspotentials von Porenbildung in Polymeren beim Einbetten elektronischer Komponenten in der Medizintechnik

    Prabitz, K., 2017

    Research output: Thesis › Master's Thesis

  235. Published

    Couples and Pairs Formation – Thermodynamic and Kinetic Modelling Applied to Al-Mg-Si

    Svoboda, J., Shan, Y. V., Kozeschnik, E. & Fischer, F.-D., 2017, In: Modelling and simulation in materials science and engineering. 25.2017, 15 p., 065011.

    Research output: Contribution to journal › Article › Research › peer-review

  236. Published

    Crack Driving Force in Twisted Plywood Structures

    Fischer, F.-D., Kolednik, O., Predan, J., Razi, H. & Fratzl, P., 2017, In: Acta biomaterialia. 55.2017, June, p. 349-359 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  237. Published

    Experimental and computational approach to evaluate the effect of leveling on the change of tensile properites of heavy steel plates

    Kaltenbrunner, T., Ecker, W., Antretter, T., Kaiser, R., Parteder, E. & Egger, R., 2017, AIP Conference Proceedings.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  238. Published

    Lecture within the Training School: The challenge of CRMs in extreme condition: advanced multidisciplinary view

    Gamsjäger, E., 2017.

    Research output: Contribution to conference › Presentation › Research › peer-review

  239. Published

    Numerical analysis of the rock cutting process based on a two-parameter description of tensile strength

    Pittino, G., Galler, R., Antretter, T., Mikl-Resch, M. J., Tichy, R., Ecker, W., Gimpel, M. & Kargl, H., 2017, Proceedings of 13th ISRM International Congress of Rock Mechanics 2015. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  240. Published

    Numerical simulation of stress-free shotcrete installation in the underground structures using finite element program ABAQUS

    Darmaev, E., Galler, R. & Antretter, T., 2017, Proceedings of the IV International Conference on Computational Methods in Tunneling and Subsurface Engineering: EURO:TUN 2017. Innsbruck, p. 339-346 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  241. Published

    Numerical study of the influence of irradiation parameters on the microwave-induced stresses in granite

    Toifl, M., Hartlieb, P., Meisels, R., Antretter, T. & Kuchar, F., 2017, In: Minerals engineering. 103-104.2017, April, p. 78-92 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  242. Published

    On Variants, Blocks and Packets and their Interaction with Crystal Plasticity

    Antretter, T., Petersmann, M., Cailletaud, G., Ehlenbröcker, U. & Vieweg, A., 2017.

    Research output: Contribution to conference › Presentation › Research › peer-review

  243. Published

    Optimization of a quick-release fastener for cutting discs in industrial mining applications

    Kernbichler, C., 2017

    Research output: Thesis › Master's Thesis

  244. Published

    Pre- and post-buckling behavior of bi-crystalline micropillars: Origin and consequences

    Kirchlechner, C., Toth, F., Rammerstorfer, F. G., Fischer, F.-D. & Dehm, G., 2017, In: Acta materialia. 124.2017, 1 February, p. 195-203 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  245. Published

    Quantification of the material inhomogeneity effect in thin metallic film stacks

    Kozic, D., 2017

    Research output: Thesis › Doctoral Thesis

  246. Published

    Thermodynamic modelling of irreversible processes

    Svoboda, J., Fischer, F. D. & Kozeschnik, E., 2017, European Mineralogical Union and Mineralogical Society of Great Britain and Ireland. Vol. 16. p. 181-214 34 p. (EMU notes in mineralogy).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  247. Published

    Thermodynamic Treatment of Diffusive Phase Transformation (Reactive Diffusion)

    Fischer, F. D. & Svoboda, J., 2017, Handbook of Solid State Diffusion: Diffusion Fundamentals and Techniques. Paul, A. & Divinski, S. (eds.). Amsterdam, Vol. 1. p. 391-434

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  248. 2016
  249. E-pub ahead of print

    Extracting flow curves from nano-sized metal layers in thin film systems

    Kozic, D., Maier-Kiener, V., Konetschnik, R., Gänser, H.-P., Antretter, T., Brunner, R. & Kiener, D., 7 Dec 2016, (E-pub ahead of print) In: Scripta materialia. 130.2017, 15 March, p. 143-147 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  250. E-pub ahead of print

    Effect of reverted austenite on tensile and impact strength in a martensitic stainless steel: An in-situ X-ray diffraction study

    Wießner, M., Gamsjäger, E., van der Zwaag, S. & Angerer, P., 12 Nov 2016, (E-pub ahead of print) In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 682.2017, 13 January, p. 117-125 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  251. Published

    Microstructural evolution - experiments and modeling

    Gamsjäger, E., Wießner, M., Militzer, M. & Garcin, T., 6 Oct 2016.

    Research output: Contribution to conference › Poster › Research › peer-review

  252. Published

    Failure of Hot-Dip Galvanized Steel Parts : Versagen von feuerverzinkten Stahlbauteilen

    Panzenböck, M., Mendez Martin, F., Rashkova, B., Schütz, P. & Kaiser, R., Oct 2016, In: Practical metallography = Praktische Metallographie. 53.2016, 10, p. 641-651 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  253. Published

    Austenite grain growth investigated by complementary in-situ techniques

    Gamsjäger, E., Tichauer, W., Lederhaas, B., Garcin, T. & Militzer, M., 28 Sept 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  254. E-pub ahead of print

    Curvature determination of embedded silicon chips by in situ rocking curve X-ray diffraction measurements at elevated temperatures

    Angerer, P., Schöngrundner, R., Macurova, K., Wießner, M. & Keckes, J., 28 Sept 2016, (E-pub ahead of print) In: Powder diffraction. 31.2016, 4, p. 267-273 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  255. Published

    A Mean-Field Model for TRIP - Algorithms and Parameter Identification

    Petersmann, M. & Antretter, T., 24 Aug 2016.

    Research output: Contribution to conference › Poster › Research

  256. Published

    Heat capacaties and entropies of molybdates and carbonates

    Gamsjäger, E. & Gamsjäger, H., 25 Jul 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  257. Published

    Irreversible thermodynamics applied to diffusional phase transformations

    Gamsjäger, E. & Kircher, V. (Co-editor), 29 Jun 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  258. Published

    Strategies for the optimization of computationally generated microstructures in nanocrystalline Ni50Ti

    Petersmann, M., 10 Jun 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  259. Published

    Microwave irradiation as means of alternative rock extraction technology

    Hartlieb, P., Toifl, M. & Grafe, B., 19 May 2016.

    Research output: Contribution to conference › Presentation › Research

  260. E-pub ahead of print

    New approach for the simulation of chain drive dynamics with consideration of the elastic environment

    Grinschgl, M., Reich, F. M., Abeltshauser, R., Eder, M. & Antretter, T., 5 May 2016, (E-pub ahead of print) In: Proceedings of the Institution of Mechanical Engineers Engineers, Part K, Journal of multi-body dynamics. 231.2017, 3, p. 103-120 18 p.

    Research output: Contribution to journal › Article › Research › peer-review

  261. Published

    Numerical study of the influence of irradiation parameters on the microwave-induced stresses in granite for industrial applications

    Toifl, M., Hartlieb, P., Meisels, R., Antretter, T. & Kuchar, F., 11 Apr 2016.

    Research output: Contribution to conference › Presentation › Research

  262. Published

    Numerical study of the influence of irradiation parameters on the microwave-induced stresses in granite for industrial applications

    Toifl, M., Hartlieb, P., Meisels, R., Antretter, T. & Kuchar, F., 11 Apr 2016, Comminution '16 - Proceedings.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  263. Published

    Size-dependent surface energies of Au nanoparticles

    Holec, D., Dumitraschkewitz, P., Fischer, F. D. & Vollath, D., 11 Apr 2016, p. 1-13. 13 p.

    Research output: Contribution to conference › Presentation › Research

  264. Published

    In-situ Observation of Cross- Sectional Microstructural Changes and Stress Distributions in Fracturing TiN Thin Film during Nanoindentation

    Zeilinger, A., Todt, J., Krywka, C., Müller, M., Ecker, W., Sartory, B., Meindlhumer, M., Stefenelli, M., Daniel, R., Mitterer, C. & Keckes, J., 7 Mar 2016, In: Scientific reports (London : Nature Publishing Group). 6:22670, p. 1-14 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  265. Published

    Eigenspannungsoptimiertes Richtkonzept: Anwendung auf Langprodukte

    Kaiser, R., Antretter, T. & Buchmayr, B., 5 Mar 2016, Tagungsgband XXXV. Verformungskundliches Kolloquium 2016: Tagungsband. Buchmayr, B. (ed.). Leoben: Montanuniversität Leoben, Lehrstuhl für Umformtechnik, p. 153-159 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  266. E-pub ahead of print

    3D numerical study on microwave induced stresses in inhomogeneous hard rocks

    Toifl, M., Meisels, R., Hartlieb, P., Kuchar, F. & Antretter, T., 18 Jan 2016, (E-pub ahead of print) In: Minerals engineering. 90.2016, May, p. 29-42 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  267. Published

    Analyse eines Wälzlagerprüfstands hinsichtlich Steifigkeit und dynamischer Belastung

    Zellhofer, M., 2016

    Research output: Thesis › Diploma Thesis

  268. Published

    A new Treatment of transient grain growth

    Svoboda, J., Fratzl, P., Zickler, G. & Fischer, F. D., 2016, In: Acta materialia. 115, p. 442-447

    Research output: Contribution to journal › Article › Research › peer-review

  269. Published

    A Self-Consistent Model for Thermodynamics of Multicomponent Solid Solutions

    Svoboda, J. & Fischer, F. D., 2016, In: Scripta materialia. p. 154-157

    Research output: Contribution to journal › Article › Research › peer-review

  270. Published

    A thermokinetic model for Mg-Si couple Formation in Al-Mg-Si alloys

    Svoboda, J., Shan, Y. V., Kozeschnik, E. & Fischer, F. D., 2016, In: Modelling and simulation in materials science and engineering. 24, p. 035021-1-16 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  271. Published

    Calculation of crack driving Forces of surface cracks subjected to rolling/sliding contact

    Krácalik, M., Daves, W. & Antretter, T., 2016, In: Engineering Fracture Mechanics. 152, 2, p. 10-25

    Research output: Contribution to journal › Article › Research › peer-review

  272. Published

    Experimental and theoretical evidence of displacive martensite in an intermetallic Mo-containing Ƴ-TiAl based alloy

    Mayer, S., Petersmann, M., Fischer, F. D., Clemens, H., Waitz, T. & Antretter, T., 2016, In: Acta materialia. 115, p. 242-249 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  273. Published

    Finite element analysis of arbitrarily complex electronics devices

    Gschwandl, M., Fuchs, P., Fellner, K., Antretter, T., Krivec, T. & Tao, Q., 2016, Proceedings of the 18th Electronics Packaging Technology Conference EPTC2016. p. 497-500

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  274. Published

    Fracture and Material Behavior of Thin Film composites

    Kozic, D., Konetschnik, R., Maier-Kiener, V., Schöngrundner, R., Brunner, R., Kiener, D., Antretter, T. & Gänser, H.-P., 2016, 2016 17th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE) . Institute of Electrical and Electronics Engineers, p. 1-6 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  275. Published

    Free edges at bilayered compounds - a short analytical and numerical reconsideration

    Antretter, T., Fischer, F. D., Rammerstorfer, F. G. & Zickler, G. A., 2016, In: Archive of applied mechanics. 86, p. 2053-2061

    Research output: Contribution to journal › Article › Research › peer-review

  276. Published

    Improved thermodynamic Treatment of vacancy-mediated diffusion

    Fischer, F. D., Hackl, K. & Svoboda, J., 2016, In: Acta materialia. 108, p. 347-354

    Research output: Contribution to journal › Article › Research › peer-review

  277. Published

    Influence of the levelling process on the mechanical properties of heavy steel plates

    Kaltenbrunner, T., Antretter, T., Ecker, W., Kaiser, R., Gänser, H.-P. & Parteder, E., 2016, Proceedings of Rolling '16.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  278. Published

    Modeling Concepts for Intermetallic Titanium Aluminides

    Appel, F., Clemens, H. & Fischer, F. D., 2016, In: Progress in materials science. 81, p. 55-124

    Research output: Contribution to journal › Article › Research › peer-review

  279. Published

    Modeling of variant-interaction during bainitic phase transformation

    Ehlenbröker, U., Mahnken, R., Petersmann, M. & Antretter, T., 2016, IOP Conference Series Materials Science and Engineering.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  280. Published

    Numerical simulation of the electrical performance of printed circuit boards under cyclic thermal loads

    Fellner, K., Antretter, T., Fuchs, P. F. & Tao, Q., 2016, In: Microelectronics Reliability. p. 148-155

    Research output: Contribution to journal › Article › Research › peer-review

  281. Published

    Numerical study of microwave induced stress and damage formation in heterogeneous rocks

    Toifl, M., 2016

    Research output: Thesis › Doctoral Thesis

  282. Published

    Precipitate growth in multi-component systems with stress relaxation by diffusion and creep

    Svoboda, J., Fischer, F. D., Riedel, H. & Kozeschnik, E., 2016, In: International journal of plasticity. 82, p. 112 126 p.

    Research output: Contribution to journal › Article › Research › peer-review

  283. Published

    Simulation and optimization of the in-service behavior of coated inserts for turning and milling

    Krajinovic, I., 2016

    Research output: Thesis › Doctoral Thesis

  284. Published

    Simulation des Freiformbiegens von Profilrohren im Automobilbau

    Beulich, N. V., 2016

    Research output: Thesis › Master's Thesis

  285. Published

    Stress Relaxation by Power-Law Creep During Growth of a Misfitting Precipitate

    Fischer, F. D., Svoboda, J., Antretter, T. & Kozeschnik, E., 2016, In: International journal of solids and structures. 96, p. 74-80

    Research output: Contribution to journal › Article › Research › peer-review

  286. Published

    The Mechanics of Tessellations - Bioinspired Strategies for Fracture Resistance

    Fratzl, P., Kolednik, O., Fischer, F. D. & Dean, M. N., 2016, In: Chemical Society Reviews. 45, 2, p. 252-267

    Research output: Contribution to journal › Article › Research › peer-review

  287. Published

    Thermomechanische Simulation des Härteprozesses von wärmebehandelten Grobblechen

    Bacher, B., 2016

    Research output: Thesis › Master's Thesis

  288. Published

    Thermo-physical properties of selected hard rocks and their relation to microwave-assisted comminution

    Hartlieb, P., Toifl, M., Kuchar, F., Meisels, R. & Antretter, T., 2016, In: Minerals engineering. 91.2016, p. 34 - 41 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  289. 2015
  290. E-pub ahead of print

    Cyclic mechanical behavior of thin layers of copper: A theoretical and numerical study

    Fellner, K., Antretter, T., Fuchs, P. & Pelisset, T. M. A., 8 Dec 2015, (E-pub ahead of print) In: The Journal of Strain Analysis for Engineering Design. 51.2016, 2, p. 1-9 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  291. Published

    Special cases of martensite compatibility: A near single-variant habit-plane and the martensite of nanocrystalline NiTi

    Petersmann, M. & Antretter, T., 1 Dec 2015, MATEC Web of Conferences : ESOMAT 2015 – 10th European Symposium on Martensitic Transformations . Schryvers, N. & Van Humbeeck, J. (eds.). 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  292. Published

    Calculating entropies of alkaline earth metal molybdates

    Gamsjäger, E., Morishita, M. & Gamsjäger, H., 18 Nov 2015, In: Monatshefte für Chemie = Chemical monthly.

    Research output: Contribution to journal › Article › Research › peer-review

  293. Published

    Crystallographic aspects of phase transformations in intermetallics and steels

    Petersmann, M., Antretter, T. & Ehlenbröcker, U., 4 Nov 2015.

    Research output: Contribution to conference › Presentation › Research

  294. Published

    Modeling of variant-interaction during bainitic phase transformation

    Ehlenbröcker, U. & Petersmann, M., 10 Oct 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  295. E-pub ahead of print

    Analysis of the mobility of migrating austenite–ferrite interfaces

    Gamsjäger, E., Wiessner, M., Schider, S., Chen, H. & van der Zwaag, S., 11 Sept 2015, (E-pub ahead of print) In: Philosophical magazine. 95.2015, 26, p. 2899-2917 19 p.

    Research output: Contribution to journal › Article › Research › peer-review

  296. Published

    Modelling of Precipitation in High Strength Creep Resistant Steels

    Antretter, T., Fischer, F. D., Kozeschnik, E. & Svoboda, J., 10 Aug 2015.

    Research output: Contribution to conference › Presentation › Research

  297. Published

    An inverse finite element approach to calculate full-field forming strains

    Ritt, R., Machado, M., Fischlschweiger, M., Major, Z. & Antretter, T., Jul 2015, Key engineering materials. Vol. 651-653.2015. p. 363-368 6 p. (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  298. Published

    Evolution of reverted austenite and martensite during thermal processing of chromium stainless steels

    Gamsjäger, E., Wiessner, M., Gruber, M. & van der Zwaag, S., 30 Jun 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  299. Published

    The kinetics of diffusive phase transformations in the light of trans-interface diffusion

    Gamsjäger, E. & Rettenmayr, M., 28 Jun 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  300. E-pub ahead of print

    A New Self-Consistent Model for Thermodynamics of Binary Solutions

    Svoboda, J., Shan, Y. V. & Fischer, F. D., 15 Jun 2015, (E-pub ahead of print) In: Scripta materialia. 108.2015, November, p. 27-30 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  301. Published

    The relation of temperature, microwave absorbing properties and thermo - dynamic behavior of selected hard rocks

    Hartlieb, P., Toifl, M., Meisels, R., Antretter, T. & Kuchar, F., 11 Jun 2015, Physical Separation 15 - Proceedings.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  302. Published

    The relation of temperature, microwave absorbing properties and thermo-dynamic properties of selected hard rocks

    Hartlieb, P., Toifl, M., Meisels, R., Antretter, T. & Kuchar, F., 11 Jun 2015.

    Research output: Contribution to conference › Presentation › Research

  303. Published

    Tissue growth controlled by geometric boundary conditions: A simple model recapitulating aspects of callus formation and bone healing

    Fischer, F.-D., Zickler, G., Dunlop, J. W. C. & Fratzl, P., 6 Jun 2015, In: Journal of the Royal Society Interface. 12.2015, 107, 8 p., 20150108.

    Research output: Contribution to journal › Article › Research › peer-review

  304. Published

    NUMERICAL ANALYSIS OF THE ROCK CUTTING PROCESS BASED ON A TWO PARAMETER DESCRIPTION OF TENSILE STRENGTH USING THE WEIBULL THEORY

    Mikl-Resch, M. J., Tichy, R., Antretter, T., Pittino, G., Galler, R., Ecker, W., Gimpel, M. & Kargl, H., 13 May 2015. 5 p.

    Research output: Contribution to conference › Presentation › Research › peer-review

  305. Published

    NUMERICAL ANALYSIS OF THE ROCK CUTTING PROCESS BASED ON A TWO PARAMETER DESCRIPTION OF TENSILE STRENGTH USING THE WEIBULL THEORY

    Mikl-Resch, M. J., Antretter, T., Tichy, R., Pittino, G., Galler, R., Ecker, W., Gimpel, M. & Kargl, H., 10 May 2015, ISRM 2015_PROCEEDINGS. 5 p. 724

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  306. Published

    NUMERICAL ANALYSIS OF THE ROCK CUTTING PROCESS BASED ON A TWO PARAMETER DESCRIPTION OF TENSILE STRENGTH USING THE WEIBULL THEORY

    Mikl-Resch, M. J., Antretter, T., Tichy, R., Pittino, G., Galler, R., Ecker, W., Gimpel, M. & Kargl, H., 10 May 2015. 5 p.

    Research output: Contribution to conference › Poster › Research

  307. Published

    Fracture mechanics of thin film systems on the sub-micron scale

    Kozic, D., Treml, R., Schongrundner, R., Brunner, R., Kiener, D., Zechner, J., Antretter, T. & Ganser, H. P., 6 May 2015, 2015 16th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2015. Institute of Electrical and Electronics Engineers, 7103088

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  308. Published

    Characterization of stainless steels by means of high temperature X-­ray diffraction

    Gamsjäger, E., Wiessner, M. & Angerer, P., 30 Apr 2015, Stainless Steel Conference 2015-Proceedings.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  309. Published

    Comparison of Different Methods for Stress and Deflection Analysis in Embedded die Packages during the Assembly Process

    Macurova, K., Bermejo, R., Pletz, M., Schöngrundner, R., Antretter, T., Krivec, T., Morianz, M., Brizoux, M. & Lecavelier, A., 1 Apr 2015, In: Journal of Microelectronics and Electronic Packaging. 12.2015, 2, p. 80-85 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  310. Published

    Stress, deformation and diffusion interactions in solids - A simulation study

    Fischer, F. D. & Svoboda, J., 26 Feb 2015, In: Journal of the mechanics and physics of solids. 78, p. 427-442 16 p., 2612.

    Research output: Contribution to journal › Article › Research › peer-review

  311. Published

    3D numerical study on microwave induced stresses in inhomogeneous hard rocks

    Toifl, M., Meisels, R., Hartlieb, P., Kuchar, F. & Antretter, T., 2015.

    Research output: Contribution to conference › Presentation › Research

  312. Published

    3D numerical study on microwave induced stresses in inhomogeneous hard rocks

    Toifl, M., Meisels, R., Hartlieb, P., Kuchar, F. & Antretter, T., 2015.

    Research output: Contribution to conference › Paper

  313. Published

    Degradation analysis of thin die-attach layer under cyclic thermal load in microelectronics packaging

    Pelisset, T. M. A., 2015

    Research output: Thesis › Doctoral Thesis

  314. Published

    Degradation of the electrical performance of Printed Circuit Boards (PCBs) after cyclic thermo-mechanical loading

    Fellner, K., 2015

    Research output: Thesis › Doctoral Thesis

  315. Published

    Elucidating the Sorption Mechanism of Dibromomethane in Disordered Mesoporous Silica Adsorbents

    Stoeckel, D., Wallacher, D., Zickler, G., Thommes, M. & Smarsly, B., 2015, In: Langmuir.

    Research output: Contribution to journal › Article › Research › peer-review

  316. Published

    Experimental characterization and modelling of triaxial residual stresses in straightened railway rails

    Kaiser, R., Stefenelli, M., Hatzenbichler, T., Antretter, T., Hofmann, M., Keckes, J. & Buchmayr, B., 2015, In: The Journal of Strain Analysis for Engineering Design. 50, 3, p. 190-198 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  317. Published

    Generalized Gaussian Error Functions and their Applications

    Dirschmid, H. & Fischer, F. D., 2015, In: Acta mechanica. 226, p. 2887 2897 p.

    Research output: Contribution to journal › Article › Research › peer-review

  318. Published

    Growth and shrinkage of particles in slags

    Gamsjäger, E., Kircher, V. & Harmuth, H. (Co-editor), 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  319. Published

    Influence of the microstructure on rock damage during microwave irradiation: a 3D numerical analysis

    Toifl, M., Meisels, R., Hartlieb, P., Kuchar, F. & Antretter, T., 2015, Proceedings of Eurock 2015. Schubert, W. & Kluckner, A. (eds.). p. 731-736

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  320. Published

    Influence of the microstructure on rock damage during microwave irradiation: A 3D numerical analysis

    Toifl, M., Meisels, R., Hartlieb, P., Kuchar, F. & Antretter, T., 2015, Future Development of Rock Mechanics: Proceedings of the SRM Regional Symposium EUROCK 2015 & 64th Geomechanics Colloquium. Schubert, W. & Kluckner, A. (eds.). Salzburg: Österreichische Gesellschaft für Geomechanik, p. 731-736

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  321. Published

    Influence of the microstructure on rock damage during microwave irradiation: A 3D numerical analysis

    Toifl, M., Meisels, R., Hartlieb, P., Kuchar, F. & Antretter, T., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  322. Published

    Influence of the vehicle-track parameters on the crack growth in rails

    Kracalik, M., 2015

    Research output: Thesis › Doctoral Thesis

  323. Published

    Kinetics of Interstitial Segregation in Cottrell Atmospheres and Grain Boundaries

    Svoboda, J., Zickler, G., Kozeschnik, E. & Fischer, F. D., 2015, In: Philosophical magazine : Letters. 95, p. 458 465 p.

    Research output: Contribution to journal › Article › Research › peer-review

  324. Published

    Microwave absorption and its thermo-mechanical consequences in heterogeneous rocks

    Toifl, M., Meisels, R., Hartlieb, P., Kuchar, F. & Antretter, T., 2015, Geomechanics from Micro to Macro - Proceedings of the TC105 ISSMGE International Symposium on Geomechanics from Micro to Macro, IS-Cambridge 2014. Vol. 2. p. 1545-1550 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  325. Published

    Microwave propagation and absorption and its thermo-mechanical consequences in heterogeneous rocks

    Meisels, R., Toifl, M., Hartlieb, P., Antretter, T. & Kuchar, F., 2015, In: International Journal of Mineral Processing. 135, p. 40-51

    Research output: Contribution to journal › Article › Research › peer-review

  326. Published

    Multi-scale modeling of bainitic phase transformation in multi-variant polycrystalline low alloy steels

    Mahnken, R., Schneidt, A., Antretter, T., Ehlenbröker, U. & Wolff, M., 2015, In: International journal of solids and structures. 54, p. 156-171

    Research output: Contribution to journal › Article › Research › peer-review

  327. Published

    Relaxation of a Precipitate Misfit Stress State by Creep in the Matrix

    Fischer, F. D., Svoboda, J., Antretter, T. & Kozeschnik, E., 2015, In: International journal of plasticity. 64, p. 164-176

    Research output: Contribution to journal › Article › Research › peer-review

  328. Published

    Simulation des thermomechanischen Verhaltens von Grobblechen während der Schnellkühlung

    Eßl, W., Antretter, T. & Parteder, E., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  329. Published

    Simulation of the packaging process of embedded components in printed circuit boards

    Macurova, K., 2015

    Research output: Thesis › Doctoral Thesis

  330. Published

    Size effects in residual stress formation during quenching of cylinders made of hot-work tool steel

    Schemmel, M., Prevedel, P., Schöngrundner, R., Ecker, W. & Antretter, T., 2015, In: Advances in Materials Science and Engineering. 7 p., 678056.

    Research output: Contribution to journal › Article › Research › peer-review

  331. Published

    Stress and Deflection Development During Die Embedding into Printed Circuit Boards

    Macurova, K., Angerer, P., Bermejo, R., Pletz, M., Schöngrundner, R., Antretter, T., Krivec, T., Morianz, M., Brizoux, M. & Lecavelier, A., 2015, In: Materials Today: Proceedings. 2, 2, p. 4196-4205 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  332. Published

    The influence of a brittle Cr interlayer on the Deformation behavior of thin Cu films on flexible substrates: Experiment and Model

    Marx, V. M., Toth, F., Wiesinger, A., Berger, J., Kirchlechner, C., Cordill, M., Fischer, F. D., Rammerstorfer, F. G. & Dehm, G., 2015, In: Acta materialia. 89, p. 278-289

    Research output: Contribution to journal › Article › Research › peer-review

  333. Published

    The kinetics of diffusive phase transformations in the light of trans-interface diffusion

    Gamsjäger, E. & Rettenmayr, M., 2015, In: Philosophical magazine. 95:26, p. 2851-2865

    Research output: Contribution to journal › Article › Research › peer-review

  334. Published

    Thermo-kinetic modeling of Mg-Si couple formation as a precursor to precipitation in Al-Mg-Si

    Shan, Y. V., Svoboda, J., Fischer, F. D. & Kozeschnik, E., 2015, Proceedings of the International Conference on Solid-Solid Phase Transformations in Inorganic Materials. TMS, p. 883 884 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  335. Published

    The rock cutting process of road headers - Overview of laboratory tests and numerical simulation

    Pittino, G., Galler, R., Mikl-Resch, M. J., Tichy, R., Ecker, W., Antretter, T., Gimpel, M. & Kargl, H., 2015, Future Development of Rock Mechanics: Proceedings of the ISRM Regional Symposium Eurock 2015 & 64th Geomechanics Colloquium. Schubert, W. & Kluckner, A. (eds.). Salzburg: Eigenverlag, p. 243-248 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  336. Published

    Versagen von feuerverzinkten Stahlbauteilen

    Panzenböck, M., Mendez Martin, F., Rashkova, B., Schütz, P. & Kaiser, R., 2015, Sonderbänder der praktischen Metallographie 47. p. 203-208

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  337. Published

    Versagen von feuerverzinkten Stahlbauteilen - Gefüge und Versagen von Werkstoffen

    Panzenböck, M., Mendez Martin, F., Rashkova, B., Schütz, P., Kaiser, R., Spiradek-Hahn, K. & Brabetz, M., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  338. Published

    Verzerrungsanalyse räumlich gekrümmter Flächen auf Basis konformer Abbildungsalgorithmen

    Ritt, R., 2015

    Research output: Thesis › Master's Thesis

  339. Published

    Voraussage von wachstumsfähigen Squats ausgehend von einer Fehlstelle im Randbereich der Fahrspur einer Schiene

    Kubin, W., 2015, 73 p.

    Research output: Thesis › Diploma Thesis

  340. 2014
  341. Published

    Modelling the role of compositional fluctuations in nucleation kinetics

    Ženíšek, J., Kozeschnik, E., Svoboda, J. & Fischer, F. D., 31 Jul 2014, In: Acta materialia. 91, p. 355-376

    Research output: Contribution to journal › Article › Research › peer-review

  342. Published

    Rolling Contact Fatigue of Three Crossing Nose Materials—Multiscale FE Approach

    Pletz, M., Daves, W., Yao, W. & Ossberger, H., 15 Jun 2014, In: Wear. 314, 1–2, p. 69-77 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  343. Published

    Determination of Substitutional-Interstitial Interaction from Chemical Potentials of Interstitials in the Steel Matrix

    Shan, Y. V., Svoboda, J., Fischer, F. D. & Kozeschnik, E., May 2014, In: Advanced materials research. 922, p. 645-650

    Research output: Contribution to journal › Article › Research › peer-review

  344. Published

    The role of phase interface energy in martensitic transformation: A lattice Monte-Carlo simulation

    Yastrebov, V. A., Fischlschweiger, M., Cailletaud, G. & Antretter, T., Mar 2014, In: Mechanics Research Communications. 56, p. 37-41

    Research output: Contribution to journal › Article › Research › peer-review

  345. Published

    Comparison of different methods for stress and deflection analysis in embedded die packages during the assembly process

    Macurova, K., Bermejo Moratinos, R., Pletz, M., Schöngrundner, R., Antretter, T., Krivec, T., Morianz, M., Brizoux, M. & Lecavelier, A., 1 Jan 2014, Proceedings - 2014 47th International Symposium on Microelectronics, IMAPS 2014. p. 355-360 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  346. Published

    Abnormal Grain Growth: A Non-Equilibrium Thermodynamic Model for Multi-Grain Binary Systems

    Svoboda, J. & Fischer, F. D., 2014, In: Modelling and simulation in materials science and engineering. 22, p. 015013-1-015013-15

    Research output: Contribution to journal › Article › Research › peer-review

  347. Published

    Accelerated cooling of heavy steel plates - selected aspects of modelling

    Kaltenbrunner, T., 2014

    Research output: Thesis › Diploma Thesis

  348. Published

    An Easy-to-Use Estimate of the Energy-Release Rate for Crack Arrays

    Fischer, F. D., Predan, J. & Kienzler, R., 2014, In: Archive of applied mechanics. 84, p. 1325-1337

    Research output: Contribution to journal › Article › Research › peer-review

  349. Published

    Application of the cyclic phase transformation concept for determining the effective austenite/ferrite interface mobility

    Gamsjäger, E., Chen, H. & van der Zwaag, S., 2014, In: Computational materials science. 83, p. 92-100

    Research output: Contribution to journal › Article › Research › peer-review

  350. Published

    Characterization and modeling of the AuSnCu thin solder joint under thermal cycling

    Pélisset, T., Karunamurthy, B., Otremba, R. & Antretter, T., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  351. Published

    Characterization and modeling of the AuSnCu thin solder joint under thermal cycling

    Antretter, T., Otremba, R., Karunamurthy, B. & Pélisset, T., 2014, Proceedings of the 15th International Conference on Thermal, Mechanical & Multi-Physics Simulation and Experiments in Microelectronics and Microsystems EuroSimE 2014.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  352. Published

    Characterization and Modeling of the Thermomechanical Fatigue Behavior of Brake Disks for High Speed Trains

    Raninger, P., 2014

    Research output: Thesis › Doctoral Thesis

  353. Published

    Chemically Induced Fracturing in Alkali Feldspar

    Scheidl, K. S., Schaeffer, A.-K., Petrishcheva, E., Habler, G., Fischer, F. D., Schreuer, J. & Abart, R., 2014, In: Physics and Chemistry of Minerals. 41, p. 1-16

    Research output: Contribution to journal › Article › Research › peer-review

  354. Published

    Coherent Analysis of Disordered Mesoporous Adsorbents using Small Angle X-Ray Scattering and Physisorption Experiments

    Stoeckel, D., Wallacher, D., Zickler, G., Perlich, J., Tallarek, U. & Smarsly, B., 2014, In: Physical chemistry, chemical physics : PCCP. 16, p. 6583-6592

    Research output: Contribution to journal › Article › Research › peer-review

  355. Published

    Computational simulation of instability phenomena in nanoparticles and nanofilms

    Todt, M., Toth, F., Hartmann, M., Holec, D., Cordill, M. J., Fischer, F. D. & Rammerstorfer, F. G., 2014, In: Computational Technology Reviews. 10, p. 89-119

    Research output: Contribution to journal › Article › Research › peer-review

  356. Published

    Critical assessment of the determination of residual stress profiles in thin films by means of the ion beam layer removal method

    Schöngrundner, R., Treml, R., Antretter, T., Kozic, D., Ecker, W. & Kiener, D., 2014, In: Thin solid films. p. 321-330

    Research output: Contribution to journal › Article › Research › peer-review

  357. Published

    Determination of cyclic mechanical properties of thin copper layers for PCB applications

    Fellner, K., Fuchs, P. F., Antretter, T., Pinter, G. & Schöngrundner, R., 2014, Proceedings 15th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  358. Published

    Determination of Depths of Multiple Traps for Interstitials and their Influence on Diffusion Kinetics

    Svoboda, J., Shan, Y. V., Kozeschnik, E. & Fischer, F. D., 2014, In: Modelling and simulation in materials science and engineering. 22, p. 065015-1-16

    Research output: Contribution to journal › Article › Research › peer-review

  359. Published

    Diffusion of elements and vacancies in multi-component systems

    Fischer, F. D. & Svoboda, J., 2014, In: Progress in materials science. 60, p. 338-367

    Research output: Contribution to journal › Article › Research › peer-review

  360. Published

    Estimation of Thermodynamic Data of Metallic Nanoparticles Based on Bulk Values

    Vollath, D. & Fischer, F. D., 2014, Metal Nanopowders: Production, Characterization, and Energetic Applications. p. 1-24

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  361. Published

    Evaluation of the residual stress distribution in thin films by means of the ion beam layer removal method

    Kozic, D., Treml, R., Schöngrundner, R., Brunner, R., Kiener, D., Antretter, T. & Gänser, H.-P., 2014, Proceedings of the 15th International Conference on Thermal, Mechanical & Multi-Physics Simulation and Experiments in Microelectronics and Microsystems EuroSimE 2014. Zhang, G. Q., Van Driel, W. D., Rodgers, P., Bailey, C. & de Saint Leger, O. (eds.). Institute of Electrical and Electronics Engineers, 6813785

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  362. Published

    FE - simulation of chip formation in inhomogeneous materials

    Distlberger, S., 2014, 144 p.

    Research output: Thesis › Diploma Thesis

  363. Published

    Formation of Bubbles by Hydrogen Attack and Elastic-Plastic Deformation of the Matrix

    Fischer, F. D. & Svoboda, J., 2014, In: International journal of plasticity. 63, p. 110-123

    Research output: Contribution to journal › Article › Research › peer-review

  364. Published

    Generalization of the Lifshitz–Slyozov–Wagner Coarsening Theory to Non-dilute Multi-component Systems

    Svoboda, J. & Fischer, F. D., 2014, In: Acta materialia. 79, p. 304-314

    Research output: Contribution to journal › Article › Research › peer-review

  365. Published

    Growth limit of carbon onions – A continuum mechanical study

    Todt, M., Bitsche, R. D., Hartmann, M., Fischer, F. D. & Rammerstorfer, F. G., 2014, In: International journal of solids and structures. 51, p. 706-715

    Research output: Contribution to journal › Article › Research › peer-review

  366. Published

    Kinetics of the Austenite-to-Ferrite Phase Transformation - Simulations and Experiments

    Gamsjäger, E., Werner, R., Schiller, W. & Buchmayr, B., 2014, In: Steel research international. p. 131-142

    Research output: Contribution to journal › Article › Research › peer-review

  367. Published

    Mechanik und Thermodynamik der Werkstoffe

    Gamsjäger, E., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  368. Published

    Method development for the cyclic characterization of thin copper layers for PCB applications

    Fellner, K., Fuchs, P. F., Pinter, G., Antretter, T. & Krivec, T., 2014, In: Circuit World. 40, p. 53-60

    Research output: Contribution to journal › Article › Research › peer-review

  369. Published

    Modeling the Accelerated Cooling Process in Heavy Steel Plate Production

    Essl, W., 2014

    Research output: Thesis › Doctoral Thesis

  370. Published

    Modelling of phase transformations and residual stress formation in hot-work tool steel components

    Schemmel, M., Prevedel, P., Schöngrundner, R., Ecker, W. & Antretter, T., 2014, European Conference of Heat Treatment and 21st IFHTSE Congress. p. 285-292

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  371. Published

    Modelling of thin film buckling in compound specimens under uniaxial stretching

    Toth, F., Rammerstorfer, F. G., Cordill, M. J. & Fischer, F. D., 2014, Shell Structures: Theory and Applications - Proceedings of the 10th SSTA 2013 Conference. p. 247-250 4 p. (Shell Structures: Theory and Applications - Proceedings of the 10th SSTA 2013 Conference; vol. 3).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  372. Published

    Numerical analysis of a multivariant martensitic phase transformation in nanostructured NiTi considering elastic anisotropy

    Petersmann, M., 2014

    Research output: Thesis › Diploma Thesis

  373. Published

    Numerical analysis of the rock cutting and the loading of rock cutting tools

    Mikl-Resch, M. J., 2014

    Research output: Thesis › Doctoral Thesis

  374. Published

    Phase transformations in steels - from in-situ experiments to thermodynamically based models

    Gamsjäger, E., 2014, Proceedings of the 8th European continuous casting conference. p. 116-123

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  375. Published

    Pilgerwalzwerk: Einblicke in den Walzprozess durch die Anwendung der Finite Elemente Methode

    Ragger, K., Kaiser, R., Paal, J., Fluch, R. & Buchmayr, B., 2014, In: Kalibreur. p. 28-41

    Research output: Contribution to journal › Article › Research › peer-review

  376. Published

    Simulation of stress distribution in assembled silicon dies and deflection of printed circuit boards

    Macurova, K., Angerer, P., Antretter, T., Bermejo Moratinos, R., Maia, W., Schöngrundner, R., Krivec, T., Morianz, M. & Brizoux, M., 2014, Proceedings of the 15th International Conference on Thermal, Mechanical & Multi-Physics Simulation and Experiments in Microelectronics and Microsystems EuroSimE 2014.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  377. Published

    Simulation of the roller straightening process with respect to residual stresses and the curvature trend

    Kaiser, R., Hatzenbichler, T., Buchmayr, B. & Antretter, T., 2014, International Conference on Residual Stresses 9 (ICRS 9). p. 456-463

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  378. Published

    The Influence of Chemistry on the Kirkendall Effect during Grain Boundary Interdiffusion

    Svoboda, J., Fischer, F. D., Klinger, L. & Rabkin, E., 2014, In: Philosophical magazine. 94, p. 3398-3412

    Research output: Contribution to journal › Article › Research › peer-review

  379. Published

    Thermodynamic Extremal Principles for Irreversible Processes in Materials Science

    Fischer, F. D., Svoboda, J. & Petryk, H., 2014, In: Acta materialia. 67, p. 1-20

    Research output: Contribution to journal › Article › Research › peer-review

  380. Published

    Two-Dimensional Simulation of Reactive Diffusion in Binary Systems

    Svoboda, J., Stopka, J. & Fischer, F. D., 2014, In: Computational materials science. 95, p. 309-315

    Research output: Contribution to journal › Article › Research › peer-review

  381. 2013
  382. Published

    Physicochemical basis for water-actuated movement and stress generation in nonliving plant tissues

    Bertinetti, L., Fischer, F.-D. & Fratzl, P., 5 Dec 2013, In: Physical review letters. 111.2013, 23, 5 p., 238001.

    Research output: Contribution to journal › Article › Research › peer-review

  383. Published

    Multi-physics simulation of the component attachment within embedding process

    Macurova, K., Kharicha, A., Pletz, M., Mataln, M., Bermejo, R., Schongrundner, R., Krivec, T., Antretter, T., Maia, W., Morianz, M. & Brizoux, M., 1 Apr 2013, 14th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2013. Institute of Electrical and Electronics Engineers, p. 1-6 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  384. Published

    An Efficient Algorithm for Modeling the Thermo-Mechanical Material Response of Havy Steel Plates during Accelerated Cooling

    Eßl, W., Antretter, T. & Parteder, E., 2013, Key engineering materials. Vol. 554-557. p. 749-763 (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  385. Published

    A New Computational Treatment of Reactive Diffusion in Binary Systems

    Svoboda, J. & Fischer, F. D., 2013, In: Computational materials science. 78, p. 39-46

    Research output: Contribution to journal › Article › Research › peer-review

  386. Published

    A new roughness parameter to evaluate the near-surface deformation in dry rolling/sliding contact

    Kubin, W. K., Pletz, M., Daves, W. & Scheriau, S., 2013, In: Tribology International. 67, p. 132-139

    Research output: Contribution to journal › Article › Research › peer-review

  387. Published

    A Variational Approach to Grooving and Wetting

    Hackl, K., Fischer, F. D., Klevakina, K., Renner, J. & Svoboda, J., 2013, In: Acta materialia. 61, p. 1581-1591

    Research output: Contribution to journal › Article › Research › peer-review

  388. Published

    Determination of Depths of Interstitial Traps from Thermodynamic Data – A New View on Carbon Trapping and Diffusion

    Svoboda, J., Shan, Y. V., Kozeschnik, E. & Fischer, F. D., 2013, In: Modelling and simulation in materials science and engineering. 21, p. 065012-1-15

    Research output: Contribution to journal › Article › Research › peer-review

  389. Published

    Development and testing of a technique for the simulation of the rock cutting process

    Mikl, M. J., Tichy, R., Ecker, W., Antretter, T. & Pittino, G., 2013, Proceedings of Research and Applications in Structural Engineering, Mechanics and Computation. p. 505-510 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  390. Published

    Diffusive and massive phase transformations in Ti-Al-Nb alloys - Modelling and experiments

    Gamsjäger, E., Liu, Y., Rester, M., Puschnig, P., Draxl, C., Clemens, H., Dehm, G. & Fischer, F. D., 2013, In: Intermetallics. 38, p. 126-138

    Research output: Contribution to journal › Article › Research › peer-review

  391. Published

    Elastic Properties of Graphene Obtained by Computational Mechanical Tests

    Hartmann, M., Todt, M., Rammerstorfer, F. G., Fischer, F. D. & Paris, O., 2013, In: Europhysics Letters. 103, p. 68004-p1-68004-p6

    Research output: Contribution to journal › Article › Research › peer-review

  392. Published

    Elastoplastic Buckling as Source of Misinterpretation of Micropillar-Tests

    Daum, B., Dehm, G., Clemens, H., Rester, M., Fischer, F. D. & Rammerstorfer, F. G., 2013, In: Acta materialia. 61, p. 4996-5007

    Research output: Contribution to journal › Article › Research › peer-review

  393. Published

    Entwicklung eines Delaminierungsmodells einer SOFC

    Toifl, M., 2013

    Research output: Thesis › Diploma Thesis

  394. Published

    Entwicklung und Test einer Methode zur Simulation des Gesteinsschneidens mit der Finiten Elemente Methode

    Mikl, M. J., Tichy, R., Ecker, W., Antretter, T., Gimpel, M., Kargl, H., Pittino, G. & Galler, R., 2013, In: Berg- und hüttenmännische Monatshefte : BHM. p. 507-513

    Research output: Contribution to journal › Article › Research › peer-review

  395. Published

    ERC

    Fischer, F. D. (Reviewer), 2013, 34 p.

    Research output: Other contribution › Transfer › peer-review

  396. Published

    Formation of Multiple Stoichiometric Phases in Binary Systems by Combined Bulk and Grain Boundary Diffusion – Experiments and Model

    Fischer, F. D., Svoboda, J. & Schillinger, W., 2013, In: Acta materialia. 61, p. 32-39

    Research output: Contribution to journal › Article › Research › peer-review

  397. Published

    Hao Chen: Cyclic partial phase transformation in low alloyed steels: Ph. D. thesis, Theoretical, Experimental, Basic - Fundamental (Grundlagenforschung)

    Gamsjäger, E. (Reviewer), 2013

    Research output: Other contribution › Transfer › peer-review

  398. Published

    Influence of different microstructures of the welding zone on the fatigue crack growth behaviour of HSLA steels

    Maier, B., Guster, C., Tichy, R. & Ecker, W., 2013, 13th International Conference on Fracture - Abstract Book. p. 211-211

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  399. Published

    In-situ Beobachtung von Phasenumandlungen in Stählen

    Schider, S., Gamsjäger, E., Michelic, S. & Bernhard, C., 2013, Prakt. Met. Sonderband 45. p. 139-144

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  400. Published

    In situ observation of austenite–ferrite interface migration in a lean Mn steel during cyclic partial phase transformations

    Chen, H., Gamsjäger, E., Schider, S., Khanbareh, H. & van der Zwaag, S., 2013, In: Acta materialia. 61, p. 2414-2424

    Research output: Contribution to journal › Article › Research › peer-review

  401. Published

    Interstitial Diffusion in Systems with Multiple Sorts of Traps

    Fischer, F. D., Svoboda, J. & Kozeschnik, E., 2013, In: Modelling and simulation in materials science and engineering. 21, p. 025008-1-13

    Research output: Contribution to journal › Article › Research › peer-review

  402. Published

    Maximum Dissipation Crystal Plasticity - an approach to select active slip systems

    Orthaber, M., Antretter, T. & Gänser, H.-P., 2013, CM13: Proceedings of the International Conference on Computational Mechanics. p. ---

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  403. Published

    Modelling the role of surface stress on the kinetics of tissue growth in confined geometries

    Gamsjäger, E., Bidan, C. M., Fischer, F. D., Fratzl, P. & Dunlop, J. W., 2013, In: Acta biomaterialia. 9, p. 5531-5543

    Research output: Contribution to journal › Article › Research › peer-review

  404. Published

    Numerical Simulations in the field of Geotechnics and Underground Engineering - Examples of Research and Development Projects

    Galler, R., Volderauer, C., Marcher, T., Kargl, H., Gimpel, M., Mikl, M., Ecker, W., Tichy, R., Antretter, T., Gschwandtner, G., Pittino, G., Entacher, M., Lorenz, S., Schuller, E. & Mödlhammer, H., 2013, In: Berg- und hüttenmännische Monatshefte : BHM. p. 189-197

    Research output: Contribution to journal › Article › Research › peer-review

  405. Published

    On the selection of active slip systems in rate independent crystal plasticity

    Orthaber, M., Antretter, T. & Gänser, H.-P., 2013, Key engineering materials. Vol. 554-557. p. 1147-1156 (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  406. Published

    Physico-Chemical Basis for Water Actuated Movement and Stress Generation in Non Living Plant Tissues

    Bertinetti, L., Fischer, F. D. & Fratzl, P., 2013, In: Physical review letters. 111, p. 238001-1-5

    Research output: Contribution to journal › Article › Research › peer-review

  407. Published

    Role of Vacancies in Work Hardening and Fatigue of TiAl Alloys

    Appel, F., Herrmann, D., Fischer, F. D., Svoboda, J. & Kozeschnik, E., 2013, In: International journal of plasticity. 42, p. 83-100

    Research output: Contribution to journal › Article › Research › peer-review

  408. Published

    Some Examples for Advanced Numerical Solutions Pushing the Limits of Commercial Software

    Antretter, T., Hasenhütl, E., Eßl, W., Hofmann, A., Ecker, W., Heiss, C., Galler, R. & Parteder, E., 2013, In: Berg- und hüttenmännische Monatshefte : BHM. p. 211-214

    Research output: Contribution to journal › Article › Research › peer-review

  409. Published

    Thermodynamic analysis of solubility data 1: phase diagrams of systems salt hydrate + water

    Gamsjäger, H., Lorimer, J. W. & Gamsjäger, E., 2013, In: Monatshefte für Chemie = Chemical monthly. 144, p. 103-112

    Research output: Contribution to journal › Article › Research › peer-review

  410. Published

    Thermodynamic Modeling of a Phase Transformation in Protein Filaments with Mechanical Function

    Fischer, F. D., Harrington, M. J. & Fratzl, P., 2013, In: New journal of physics. 15, p. 065004-1-16

    Research output: Contribution to journal › Article › Research › peer-review

  411. Published

    Transformation hardening and kinetics for stress assisted and temperature driven transformation in steels

    Fischlschweiger, M., Antretter, T. & Cailletaud, G., 2013, In: Mechanics Research Communications. 47, p. 84-88

    Research output: Contribution to journal › Article › Research › peer-review

  412. 2012
  413. Published

    2D-Modellierung von thermomechanischen Ermüdungsvorgängen in Hochleistungsbremsscheiben für Bahnsysteme

    Schemmel, M., 2012, 91 p.

    Research output: Thesis › Diploma Thesis

  414. Published

    Active slip systems in crystal plasticity and the principle of maximum dissipation

    Orthaber, M., Antretter, T., Gänser, H.-P. & Ecker, W., 2012, Proceeding of the 5th International Conference from Scientific Computing to Computational Engineering. p. 36-41

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  415. Published

    A finite element unit cell model describing transformation induced plasticity

    Hasenhütl, E., 2012

    Research output: Thesis › Diploma Thesis

  416. Published

    A mean-field model for transformation induced plasticity including backstress effects for non-proportional loadings

    Fischlschweiger, M., Cailletaud, G. & Antretter, T., 2012, In: International journal of plasticity. p. 53-71

    Research output: Contribution to journal › Article › Research › peer-review

  417. Published

    A MODERN COURSE IN VIBRATION OF RODS AND BEAMS

    Leindl, M., Oberaigner, E. & Mataln, M., 2012, Proceedings of the International Conference on Engineering Education 2012. p. 101-109

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  418. Published

    A MODERN COURSE IN VIBRATION OF RODS AND BEAMS

    Leindl, M., Oberaigner, E. & Mataln, M., 2012, International Conference on Engineering Education 2012, Abstract Book. p. 38-38

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  419. Published

    ANALYSIS OF ELASTIC WAVE PROPAGATION BY AN IMPROVED FINITE ELEMENT METHOD

    Leindl, M. & Oberaigner, E., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  420. Published

    ANALYSIS OF ELASTIC WAVE PROPAGATION BY AN IMPROVED FINITE ELEMENT METHOD

    Leindl, M. & Oberaigner, E., 2012, Book of abstracts, EUROMECH COLLOQUIUM 540. p. 81-81

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  421. Published

    A statistical physics approach describing martensitic phase transformations

    Oberaigner, E. & Leindl, M., 2012, "A statistical physics approach describing martensitic phase transformations" in Workshop: Mechanics of Materials. p. 931-934

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  422. Published

    A Study of Interface Effects Between Porous and Double Porous Media

    Oberaigner, E., Mataln, M. & Leindl, M., 2012, Bulletin SPG/SSP Vol. 29, 2012. p. 137-137

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  423. Published

    Caloric Effects in Ferroic Materials: New Concepts for Cooling: Projektantrag; Theoretical, Experimental, Basic - Fundamental (Grundlagenforschung)

    Antretter, T. (Reviewer), 2012, 180 p. Dresden

    Research output: Other contribution › Transfer › peer-review

  424. Published

    Chemically induced fracturing in alkali feldspar

    Abart, R., Schäffer, A. K., Scheidl, K. & Fischer, F. D., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  425. Published

    Computational Treatment of the Stability of Multi-Layered Carbon Nanoparticles

    Todt, M., Hartmann, M., Paris, O., Fischer, F. D. & Rammerstorfer, F. G., 2012, Proc. IASS-IACM. p. 307-309

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  426. Published

    Convergence tests - Influence of modelling on the dynamic vibration behaviour of coaches

    Böhler, E., Antretter, T., Magerl, F. & Rosenberger, M., 2012, Generation and Propagation of Sound in Solids and Fluids - Modern Analysis Methods in Acoustics. p. 1-9

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  427. Published

    Crystal orientation changes: a comparison of crystal plasticity finite element study and experimental results

    Rehrl, C., Völker, B., Kleber, S., Antretter, T. & Pippan, R., 2012, In: Acta materialia. p. 2379-2386

    Research output: Contribution to journal › Article › Research › peer-review

  428. Published

    CRYSTAL PLASTICITY AND THE MAXIMUM RATE OF DISSIPATION

    Gänser, H.-P., Antretter, T., Ecker, W. & Orthaber, M., 2012, Book of Abstracts of 10th World Congress on Computational Mechanics. p. 100-100

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  429. Published

    Crystal Plasticity using the Principle of Maximum Dissipation

    Orthaber, M., Antretter, T. & Ecker, W., 2012, Book of Abstracts of ESMC-2012 - 8th European Solid Mechanics Conference. p. ---

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  430. Published

    Damage in Railway Crossings - Numerical Models

    Pletz, M., 2012

    Research output: Thesis › Doctoral Thesis

  431. Published

    Damage of basalt induced by microwave irradiation

    Hartlieb, P., Leindl, M., Kuchar, F., Antretter, T. & Moser, P., 2012, In: Minerals engineering. p. 82-89

    Research output: Contribution to journal › Article › Research › peer-review

  432. Published

    Derivation of the Phase Field Equations from the Thermodynamic Extremal Principle

    Svoboda, J., Fischer, F. D. & McDowell, D. L., 2012, In: Acta materialia. 60, p. 396-406

    Research output: Contribution to journal › Article › Research › peer-review

  433. Published

    Development of Techniques for Rock Cutting Applications

    Mikl, M., Antretter, T. & Pittino, G., 2012, European Mechanics Society, Book of Abstracts: ESMC-2012 - 8th European Solid Mechanics Conference, Graz, Austria, July 9-13, 2012. Holzapfel, G. A. & Ogden, R. W. (eds.). Graz

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  434. Published

    Diffusion of interstitial components in systems with traps - a continuum approach

    Svoboda, J., Fischer, F. D., Shan, Y. V. & Kozeschnik, E., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  435. Published

    DYNAMISCHE EFFEKTE AN GRENZFLÄCHEN IN ELASTISCHEN MATERIALIEN UND STRUKTUREN

    Leindl, M. & Oberaigner, E., 2012,

    Programm & Abstracts

    .     p. 13-13

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  436. Published

    Einfluss der zyklischen Verformung auf das Phasenumwandlungsverhalten in Heusler Legierungen für magnetokalorische Anwendungen: Auftraggeber: Deutsche Forschungsgesellschaft; Gutachten eines Projektantrags; Theoretical, Experimental, Basic - Fundamental (Grundlagenforschung)

    Antretter, T. (Reviewer), 2012, 20 p.

    Research output: Other contribution › Transfer › peer-review

  437. Published

    EMPLOYMENT OF OPENFOAM IN TEACHING AND RESEARCH

    Mataln, M., Leindl, M. & Oberaigner, E., 2012, International Conference on Engineering Education 2012, Abstract Book. p. 101-101

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  438. Published

    EMPLOYMENT OF OPENFOAM IN TEACHING AND RESEARCH

    Mataln, M., Leindl, M. & Oberaigner, E., 2012, Proceedings of the International Conference on Engineering Education 2012. p. 541-548

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  439. Published

    Experimental and numerical investigation of damage due to thermo mechanical fatigue of brake disks for railway applications

    Raninger, P., Ecker, W. & Antretter, T., 2012, Proceedings of 3rd Fatigue Symposium. p. 236-247

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  440. Published

    Experimental Na/K Exchange between Alkali Feldspar and an NaCl-KCl Salt Melt: Chemically Induced Fracturing and Element Partitioning

    Neusser, G., Abart, R., Fischer, F. D., Harlov, D. & Norberg, N., 2012, In: Contributions to mineralogy and petrology. 164, p. 341-358

    Research output: Contribution to journal › Article › Research › peer-review

  441. Published

    Finite Element Modeling of the Cyclic Wetting Mechanism in the Active Part of Wheat Awns

    Zickler, G., Ruffoni, D., Dunlop, J. W. C., Elbaum, R., Weinkamer, R., Fratzl, P. & Antretter, T., 2012, In: Biointerphases. 7, p. 42-42

    Research output: Contribution to journal › Article › Research › peer-review

  442. Published

    Finite Element Modeling of the Humidity-driven Wetting Mechanism of Wheat Awns

    Zickler, G., Dunlop, J. W. C., Ruffoni, D., Elbaum, R., Weinkamer, R., Fratzl, P. & Antretter, T., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  443. Published

    Finite Element Modeling of the Humidity-driven Wetting Mechanism of Wheat Awns

    Zickler, G., Dunlop, J. W. C., Ruffoni, D., Elbaum, R., Weinkamer, R., Fratzl, P. & Antretter, T., 2012, Proceedings of the 8th European Solid Mechanics Conference. p. 1-2

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  444. Published

    FRACTURE MECHANICS ANALYSIS OF A CYLINDRICAL SAMPLE LOADED BY TIME-DEPENDENT HEATING

    Leindl, M. & Oberaigner, E., 2012, 38th SOLID MECHANICS CONFERENCE, Book of Abstracts. p. 58-58

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  445. Published

    Interaction of heat checks in aluminum pressure casting dies and their effect on fatigue life

    Raninger, P., Ecker, W., Antretter, T., Leindl, M. & Ebner, R., 2012, Key engineering materials. Vol. 488-489. p. 626-629 (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  446. Published

    Kinetics and rates of martensitic phase transformation based on statistical physics

    Fischlschweiger, M. & Oberaigner, E., 2012, In: Computational materials science. p. 189-192

    Research output: Contribution to journal › Article › Research › peer-review

  447. Published

    Macro-, Meso Scale Modeling of TRIP - Nonlinear Scale Transitions Rules

    Antretter, T., Fischlschweiger, M. & Cailletaud, G., 2012, Non-Linear Response of Conventional & Advanced Materials, and Multi-scale Modeling. p. 97-99

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  448. Published

    Mechanical Vibrations of Shape Memory Alloy Wires and Rods: Mathematical and Constitutive Modelling

    Leindl, M. & Oberaigner, E., 2012, ESMC 2012 Book of Abstracts. p. 1-2

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  449. Published

    Mechanik und Thermodynamik der Werkstoffe

    Gamsjäger, E., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  450. Published

    Modeling strategies for structural phase transformations in shape memory alloys and steels

    Fischlschweiger, M., 2012, 117 p.

    Research output: Thesis › Doctoral Thesis

  451. Published

    Modeling the Role of Sources and Sinks for Vacancies on the Kinetics of Diffusive Phase Transformation in Binary Systems with Several Stoichiometric Phases

    Svoboda, J., Fischer, F. D. & Abart, R., 2012, In: Philosophical magazine : Letters. 92, p. 67-76

    Research output: Contribution to journal › Article › Research › peer-review

  452. Published

    MODELLIERUNGSKONZEPTE ZUR BESCHREIBUNG MARTENSITISCHER PHASENUMWANDLUNGEN IN FORMGEDÄCHTNISLEGIERUNGEN

    Oberaigner, E. & Leindl, M., 2012,

    Programm & Abstracts

    .     p. 12-12

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  453. Published

    Modelling for Hydrogen Diffusion in Metals with Traps Revisited

    Svoboda, J. & Fischer, F. D., 2012, In: Acta materialia. 60, p. 1211-1220

    Research output: Contribution to journal › Article › Research › peer-review

  454. Published

    Modelling the Kinetics of a Triple Junction

    Fischer, F. D., Svoboda, J. & Hackl, K., 2012, In: Acta materialia. 60, p. 4704-4711

    Research output: Contribution to journal › Article › Research › peer-review

  455. Published

    Nanostructured shape memory alloys

    Antretter, T., Fischer, F. D., Kompatscher, A. E., Müllner, P., Mangler, C., Peterlechner, M., Steiner, G. & Waitz, T., 2012, Structures and Systems.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  456. Published

    Numerische Simulation von Steinschlagschutzsystemen

    Hofmann, A., 2012

    Research output: Thesis › Master's Thesis

  457. Published

    Polycrystalline Shape Memory Alloys: Constitutive Modelling by the BSM (Block-Spin-Method)

    Oberaigner, E. & Leindl, M., 2012, Bulletin SPG/SSP Vol. 29, 2012. p. 69-69

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  458. Published

    Pseudoelastic Behavior of a Natural Material is Achieved Via Reversible Changes in Protein Backbone Conformation

    Harrington, M. J., Wascko, S. S., Masic, A., Fischer, F. D., Gupta, H. S. & Fratzl, P., 2012, In: Interface. Journal of the Royal Society. 9, p. 2911-2922

    Research output: Contribution to journal › Article › Research › peer-review

  459. Published

    Simulation der Lagerverluste in Großmotoren und deren Validierung

    Antretter, T. (Reviewer), 2012, Graz : Eigenverlag.

    Research output: Other contribution › Transfer › peer-review

  460. Published

    Simulation of the roller straightening process with respect to residual stresses and the curvature trend

    Kaiser, R., Hatzenbichler, T., Buchmayr, B. & Antretter, T., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  461. Published

    Solution of a time-dependent heat conduction problem by an integral-equation approach

    Leindl, M., Oberaigner, E. & Antretter, T., 2012, In: Computational materials science. p. 178-181

    Research output: Contribution to journal › Article › Research › peer-review

  462. Published

    Statistical physics concepts for the explanation of effects observed in martensitic transformations

    Oberaigner, E. & Leindl, M., 2012, In: Smart materials and structures. 21, p. 094020-094020

    Research output: Contribution to journal › Article › Research › peer-review

  463. Published

    Symbolic Computation in Lagrangian Mechanics

    Leindl, M., Oberaigner, E. & Mataln, M., 2012, Bulletin SPG/SSP Vol. 29, 2012. p. 73-73

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  464. Published

    Thermo-Mechanical Behaviour of Dual-Phase Steels in Various Structural Morphologies: Experiments and Modelling

    Buchmayr, B. & Antretter, T., 2012, THERMEC 2011 : International Conference on Processing and Fabrication of Advanced Materials ; processing, fabrication, properties, applications ; August 1 - 5, 2011, Quebec City, Canada . p. 2072-2077 (Materials science forum; vol. 706-709).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  465. Published

    Ultrafine -grained shape memory alloys

    Antretter, T., Fischer, F. D., Kompatscher, A. E., Müllner, P., Mangler, C., Peterlechner, M., Pranger, W., Steiner, G. & Waitz, T., 2012, TMS Annual.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  466. Published

    Wave Propagation in Elastic and Thermoelastic Materials

    Leindl, M., Oberaigner, E. & Mataln, M., 2012, Bulletin SPG/SSP Vol. 29, 2012. p. 47-47

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  467. 2011
  468. Published

    The study of controlled cooling technology and warping of X65 heavy pipeline plate

    Zhang, D. F., Lu, J. S., Antretter, T., Lü, J. G. & Song, P., 1 Dec 2011, In: Beijing Gongye Daxue Xuebao/Journal of Beijing University of Technology. 37, 12, p. 1886-1891 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  469. Published

    A space-time concept for martensitic phase transformation based on statistical physics

    Oberaigner, E. R., Fischlschweiger, M. & Antretter, T., 4 May 2011, The 14th International ESAFORM Conference on Materials Forming: ESAFORM 2011. Menary, G. (ed.). AIP, American Inst. of Physics, Vol. 1353. p. 97-102 6 p. (AIP conference proceedings; vol. 1353).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  470. Published

    Addendum to "A Study on the Principle of Maximum Dissipation for Coupled and Non-Coupled Non-Isothermal Processes in Materials

    Hackl, K., Fischer, F. D. & Svoboda, J., 2011, In: Proceedings of the Royal Society of London / A. 467, p. 2422-2426

    Research output: Contribution to journal › Article › Research › peer-review

  471. Published

    ALEMI: A Ten-Year History of Discussions of Alloying-Element Interactions with Migrating Interfaces

    Purdy, G., Agren, J., Borgenstam, A., Bréchet, Y., Enomoto, M., Furuhara, T., Gamsjäger, E., Gouné, M., Hillert, M., Hutchinson, C., Militzer, M. & Zurob, H., 2011, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 42A, p. 3703-3718

    Research output: Contribution to journal › Article › Research › peer-review

  472. Published

    A mean field model for transformation induced plasticity including backstress effects

    Cailletaud, G., Fischlschweiger, M. & Antretter, T., 2011, Compact Paper International Symposium on Plasticity 2011. p. 1-3

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  473. Published

    A Meanfield Model for Transformation Induced Plasticity Including Backstress Effects

    Cailletaud, G., Fischlschweiger, M. & Antretter, T., 2011, Macro- to Nano-scale Inelastic Deformation and Failure of Materials & Multi-scale Modeling . p. 100-102

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  474. Published

    A methodology to study crystal plasticity inside a compression test sample based on image correlation and EBSD

    Rehrl, C., Kleber, S., Antretter, T. & Pippan, R., 2011, In: Materials characterization. p. 793-800

    Research output: Contribution to journal › Article › Research › peer-review

  475. Published

    A multi-block-spin approach for martensitic phase transformation based on statistical physics

    Fischlschweiger, M., Oberaigner, E., Antretter, T. & Cailletaud, G., 2011, Behavior and Mechanics of Multifunctional Materials and Composites 2011. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  476. Published

    A multi-block-spin-method based on statistical physics describing martensitic phase transformation

    Fischlschweiger, M., Oberaigner, E., Cailletaud, G. & Antretter, T., 2011, Technical Summaries SPIE Smart Structures/NDE 2011. p. 81-81

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  477. Published

    A phenomenological mean field model for coupling phase transformation with plasticity

    Fischlschweiger, M., Cailletaud, G., Antretter, T. & Oberaigner, E., 2011, Advances in heterogeneous material mechanics ICHMM3. p. 738-745

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  478. Published

    A Possible Origin of Surface Cracks in Rails

    Fischer, F. D. & Daves, W., 2011, In: Proceedings of the Institution of Mechanical Engineers. Part F, Journal of rail and rapid transit. 225, 6, p. 605-611

    Research output: Contribution to journal › Article › Research › peer-review

  479. Published

    Application of Photons and Neutrons for the Characterization and Development of Advanced Steels

    Eidenberger, E., Schnitzer, R., Zickler, G., Schober, M., Bischof, M., Staron, P., Leitner, H., Schreyer, A. & Clemens, H., 2011, In: Advanced engineering materials. p. 664-673

    Research output: Contribution to journal › Article › Research › peer-review

  480. Published

    A statistical mechanics approach describing martensitic phase transformation

    Oberaigner, E. & Fischlschweiger, M., 2011, In: Mechanics of materials. 43, p. 467-475

    Research output: Contribution to journal › Article › Research › peer-review

  481. Published

    A Study on the Principle of Maximum Dissipation for Coupled and Non-Coupled Non-Isothermal Processes in Materials

    Hackl, K., Fischer, F. D. & Svoboda, J., 2011, In: Proceedings of the Royal Society of London / A. 467, p. 1186-1196

    Research output: Contribution to journal › Article › Research › peer-review

  482. Published

    Chemically and Mechanically Driven Creep Due to Generation and Annihilation of Vacancies with Non-ideal Sources and Sinks

    Fischer, F. D. & Svoboda, J., 2011, In: International journal of plasticity. 27, p. 1384-1390

    Research output: Contribution to journal › Article › Research › peer-review

  483. Published

    Classification of fluid mixtures according to their geometry of the critical behavior

    Fischlschweiger, M., Enders, S. & Oberaigner, E., 2011, Proceedings of the Joint Annual Meeting of the Swiss Physical Society and Austrian Physical Society. p. 67-67

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  484. Published

    Classification of fluid mixtures according to their geometry of the critical behavior

    Fischlschweiger, M., Enders, S. & Oberaigner, E., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  485. Published

    Continuum modeling of van der Waals interactions between carbon onion layers

    Todt, M., Rammerstorfer, F. G., Fischer, F. D., Mayrhofer, P. H., Holec, D. & Hartmann, M., 2011, In: Carbon. 49, p. 1620-1627

    Research output: Contribution to journal › Article › Research › peer-review

  486. Published

    Critical phenomena and relations between thermodynamical response functions of polycrystalline SMAs

    Oberaigner, E., Fischlschweiger, M., Leindl, M., Petersmann, M. & Mataln, M., 2011, 82nd Annual Scientific Conference of the International Association of Applied Mathematics and Mechanics, Book of Abstracts. p. 207-207

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  487. Published

    Damping Behaviour of Vibrating Shape Memory Alloy Rods Investigated by a Novel Constitutive Model

    Leindl, M., Oberaigner, E. & Fischlschweiger, M., 2011, 82nd Annual Scientific Conference of the International Association of Applied Mathematics and Mechanics, Book of Abstracts. p. 205-206

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  488. Published

    Deformation Mechanisms in Micron-Sized PST-TiAl Compression Samples: Experiment and Model

    Rester, M., Fischer, F. D., Kirchlechner, C., Schmölzer, T., Clemens, H. & Dehm, G., 2011, In: Acta materialia. 59, p. 3410-3421

    Research output: Contribution to journal › Article › Research › peer-review

  489. Published

    Deformation of Mesopores upon Condensation and Sublimation of Water and Argon in a SBA-15 Matrix: Synchrotron SAXS studies

    Rau, D., Mörz, S., Perlich, J., Zickler, G., Smarsly, B., Wallacher, D., Leitenberger, W., Pietsch, U. & Huber, P., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  490. Published

    Diffusion Processes in a Migrating Interface – The Thick Interface Model

    Svoboda, J., Gamsjäger, E., Fischer, F. D., Liu, Y. & Kozeschnik, E., 2011, In: Acta materialia. 59, p. 4775-4786

    Research output: Contribution to journal › Article › Research › peer-review

  491. Published

    Evolution Equations for Grain Growth and Coarsening, Chapter I

    Fischer, F. D. & Svoboda, J., 2011, Evolution Equation. p. 5-60

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  492. Published

    Fluctuations, Bistability and Hysteresis Connected to Phase Transformations of Nanoparticles

    Vollath, D. & Fischer, F. D., 2011, In: Progress in materials science. 56, p. 1030-1076

    Research output: Contribution to journal › Article › Research › peer-review

  493. Published

    Improved Multi-Particle Unit Cell Models for Studying Particle Reinforced Composites: Dissertation Azra Razool

    Antretter, T. (Reviewer), 2011, Wien

    Research output: Other contribution › Transfer › peer-review

  494. Published

    Influence of single crystal size on the phase transformation behavior of a polycrystalline SMA

    Mataln, M., Petersmann, M., Fischlschweiger, M., Leindl, M., Hackl, A. & Oberaigner, E., 2011, Proceedings of the Joint Annual Meeting of the Swiss Physical Society and Austrian Physical Society. p. 58-58

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  495. Published

    Influence of single crystal size on the phase transformation behavior of a polycrystalline SMA

    Mataln, M., Petersmann, M., Fischlschweiger, M., Leindl, M., Oberaigner, E. & Hackl, A., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  496. Published

    In-situ high-energy X-ray diffraction study of deformation mechanisms in ultrafine-grained pure Cu and Fe

    Schuster, R., Schafler, E., Zickler, G. & Lippmann, T., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  497. Published

    In-situ SAXS study of the Adsorption Behaviour of Periodic Mesoporous Organosilicas (PMOs)

    Zickler, G., Mascotto, S., Weidmann, C., Wallacher, D., Perlich, J. & Smarsly, B., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  498. Published

    Kinetics of Diffusive Phase Transformations: From Local Equilibrium to Mobility-Driven Migration of Thick Interfaces

    Gamsjäger, E., 2011, In: Pure and Applied Chemistry. 83, p. 1105-1112

    Research output: Contribution to journal › Article › Research › peer-review

  499. Published

    Kinetik der Gamma/Alpha-Umwandlung niedriglegierter Stähle Vergleich von Modellrechnungen und Versuchsergebnissen

    Werner, R. E., 2011, 106 p.

    Research output: Thesis › Diploma Thesis

  500. Published

    Martensitic Phase Transformations of Nanocrystalline NiTi Shape Memory Alloys Processed by Repeated Cold Rolling

    Peterlechner, M., Waitz, T., Gammer, C. & Antretter, T., 2011, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 102, p. 634-642

    Research output: Contribution to journal › Article › Research › peer-review

  501. Published

    MD-Simulation using EAM- A theoretical consideration

    Fischlschweiger, M. & Oberaigner, E., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  502. Published

    Modeling stress dependent hysteretic SMA behavior based on a block-spin-approach from statistical mechanics

    Leindl, M., Fischlschweiger, M. & Oberaigner, E., 2011, Advances in heterogeneous material mechanics ICHMM3. p. 564-567

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  503. Published

    Modellierung der Belastung, des Eigenspannungsaufbaus und der Lebensdauer in Kaltmassivumformwerkzeugen

    Herzog, D., 2011

    Research output: Thesis › Diploma Thesis

  504. Published

    Modelling of Diffusive and Massive Phase Transformations in Binary Systems – Thick Interface Parametric Model

    Svoboda, J. & Gamsjäger, E., 2011, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 102, p. 666-673

    Research output: Contribution to journal › Article › Research › peer-review

  505. Published

    Modelling of Excess Vacancy Annihilation at Different Types of Sinks

    Fischer, F. D., Svoboda, J., Appel, F. & Kozeschnik, E., 2011, In: Acta materialia. 59, p. 3463-3472

    Research output: Contribution to journal › Article › Research › peer-review

  506. Published

    Modelling of Reaction of Metallic Nanospheres with Gas

    Fischer, F. D. & Svoboda, J., 2011, Solid-Solid Phase Transformations in Inorganic Materials. p. 1028-1037

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  507. Published

    Modelling of the Influence of Sources and Sinks for Vacancies and Stress State on Diffusion in Crystalline Solids

    Svoboda, J. & Fischer, F. D., 2011, In: Acta materialia. 59, p. 1212-1219

    Research output: Contribution to journal › Article › Research › peer-review

  508. Published

    Momentum spectra for dynamically assisted Schwinger pair production

    Orthaber, M., Hebenstreit, F. & Alkofer, R., 2011, In: Physics letters / B. 698, p. 80-85

    Research output: Contribution to journal › Article › Research › peer-review

  509. Published

    Multifunctional Shape Memory Alloys processed by SPD

    Waitz, T., Mangler, C., Antretter, T., Fischer, F.-D., Pranger, W. & Müllner, P., 2011, Proceedings of International Symposium on Giant Straining Process for Advanced Materials (GSAM). p. 88-94

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  510. Published

    Multifunctional Shape Memory Alloys Processed by SPD

    Waitz, T., Mangler, C., Steiner, G., Peterlechner, M., Antretter, T., Fischer, F. D. & Pranger, W., 2011, Proceedings of International Symposium on Giant Straining Process for Advanced Materials (GSAM). p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  511. Published

    Near critical phenomena in amorphous smart materials

    Oberaigner, E. & Fischlschweiger, M., 2011, Bulletin of the American Physical Society 2011. p. 769-769

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  512. Published

    Neue Modellierungskonzepte für TRIP – Tranformation Induced Plasticity

    Antretter, T., Fischlschweiger, M. & Cailletaud, G., 2011, Tagungsband. p. 75-79

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  513. Published

    Relations between near-critical phenomena in SMAs

    Oberaigner, E. & Fischlschweiger, M., 2011, Proceedings of the Joint Annual Meeting of the Swiss Physical Society and Austrian Physical Society. p. 32-33

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  514. Published

    Sensitivity study of a statistical physics base method describing martensitic phase transformation

    Mataln, M., Fischlschweiger, M., Leindl, M. & Oberaigner, E., 2011, 82nd Annual Scientific Conference of the International Association of Applied Mathematics and Mechanics, Book of Abstracts. p. 206-206

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  515. Published

    Shell-models for multi-layer carbon nano-particles

    Todt, M., Rammerstorfer, F. G., Hartmann, M., Paris, O. & Fischer, F. D., 2011, Shell-like structures. p. 585-602

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

Previous 1 2 Next
View graph of relations

Contact information

Franz-Josef-Strasse 18/III, 8700 Leoben
  • Main phone number: +43 3842 402 4001