Chair of Ceramics (320)

Organisational unit: Chair

1 - 500 out of 534Page size: 500

Research output

  1. 2025
  2. Published

    Application of coupled CFD-DEM modelling in erosion study of cohesive materials: A case study of rotating finger test

    Rahimilarki, M., Burhanuddin, B., Vollmann, S., Jin, S. & Harmuth, H., 23 Jan 2025, In: Results in Engineering. 25.2025, March, 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  3. 2024
  4. Published

    Artificial neural network model for estimating mold flux melting temperature

    Mapelli, C., Mombelli, D., Dall'osto, G., Cho, J., Gruber, N., Marschall, I., Cornille, M., Alloni, M. & Carli, R., 15 Dec 2024, In: ISIJ international. 64.2014, 14, p. 2008-2019 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Erosion Behavior of Coarse-Grained Alumina in Corrosive Melts: Experimental and Computational Studies with CAS and CASM Slags

    Guarco, J., Vollmann, S., Harmuth, H. & Burhanuddin, B., 19 Nov 2024.

    Research output: Contribution to conference › Paper › peer-review

  6. Published

    Fracture process zone modelling of a magnesia spinel refractory using phase field fracture model

    Ali, Z., Jin, S. & Gruber, D., 15 Nov 2024, In: Finite elements in analysis and design. 242.2024, December, 12 p., 104279.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Utilization of recovered refractory material as slag additive and experimental determination of liquid slag properties

    Moll, S., Marschall, I., Schlemmer, N., Halwax, A., Kek, F. W., Weiß, C. & Eisbacher-Lubensky, J., 30 Oct 2024.

    Research output: Contribution to conference › Presentation › Research

  8. Published

    Design of a new ceramic castable for investment casting of turbine blades

    Smedes, M., Gruber, D. & Zhang, W., 15 Oct 2024.

    Research output: Contribution to conference › Presentation › Research

  9. Published

    Creep strain recovery of a refractory castable under loading/unloading conditions

    Gruber, D., Akbari, B. & Harmuth, H., 18 Sept 2024, Proceedings of International Colloquium on Refractories: ICR 2024.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. Published

    Microstructural changes in high alumina refractory due to hydrogen exposure

    Bohorquez Moreno, C. & Gruber, D., 18 Sept 2024, Proceedings of International Colloquium on Refractories: ICR 2024.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  11. Published

    Coupled CFD-DEM Simulation of Flow-Induced Erosion in Cohesive Materials

    Vollmann, S., Rahimilarki, M. & Jin, S., Sept 2024.

    Research output: Contribution to conference › Abstract › peer-review

  12. Published

    Flow-induced erosion modelling of cohesive material with coupled CFD-DEM approach

    Rahimilarki, M., Vollmann, S. & Jin, S., 27 Aug 2024, In: Minerals engineering. 217.024, October, 15 p., 108947.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Finite Element modelling of refractories fracture process zone with gradient enhanced damage models

    Ali, Z. & Gruber, D., 26 Aug 2024.

    Research output: Contribution to conference › Presentation › Research

  14. Published

    Experimental, analytical, and numerical quantification of the Marangoni effect in static refractory finger test

    Vollmann, S., Guarco, J. & Burhanuddin, B., 28 Jun 2024, In: Ceramics International : CI. 50.2024, 18, Part B, p. 33953-33967 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Effect of Slag Basicity on Alumina Dissolution and Diffusivity: A High-temperature Confocal Laser Scanning Microscopy Study

    Burhanuddin, B. & Harmuth, H., 15 Jun 2024, In: China's refractories. 33.2024, 2, p. 27-34 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Brittleness reduction of low-carbon Al2O3-C refractories with in-situ formation MgAl2O4/CNTs layer between aggregate and matrix

    Luo, J., Jin, S., Chong, X., Ding, D. & Xiao, G., Apr 2024, In: Journal of the European Ceramic Society. 44.2024, 4, p. 2620-2629 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Determination of the influence of particle spatial distribution and interface heterogeneity on tensile fracture of ordinary refractory ceramics by applying discrete element modelling

    Du, W., Jin, S. & Gruber, D., 21 Mar 2024, In: Computational particle mechanics. 11.2024, 5, p. 1887-1901 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Finite element modelling of refractories fracture process zone with gradient enhanced damage models

    Ali, Z., Jin, S. & Gruber, D., 21 Mar 2024, In: Finite elements in analysis and design. 234.2024, July, 15 p., 104151.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Steel Ladle Slag Zone Lining Optimization Considering Irreversible Material Behavior

    Klopf, M., Hou, A., Jin, S. & Gruber, D., 13 Mar 2024, In: Steel research international. 95.2024, 7, 10 p., 2300557.

    Research output: Contribution to journal › Article › Research › peer-review

  20. E-pub ahead of print

    Determining the critical Reynolds number for suppressing Marangoni convection of alumina in silicate melt

    Burhanuddin, B., Harmuth, H. & Vollmann, S., 29 Feb 2024, (E-pub ahead of print) In: Ceramics International : CI. 50.2024, 11 Part A, p. 18323-18328 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    A Modified Rotating-Finger Test Aiming to Quantify Refractory Wear Based on Fundamental Equations Governing Refractory Dissolution and Erosion

    Burhanuddin, B. & Harmuth, H., 6 Feb 2024, Advances in Pyrometallurgy: Furnace Containment. Springer, p. 119-132

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. Published

    Creep and creep strain recovery of a spinel forming refractory castable - measurement and simulation

    Akbari, B., 2024

    Research output: Thesis › Doctoral Thesis

  23. Published

    Dynamic wetting phenomena of CaO-SiO2-Al2O3-Li2O slag on magnesia

    Ijaz, M. U., 2024

    Research output: Thesis › Master's Thesis

  24. Published

    Effect of liquefaction controlling components in carbon-free mould powder for the continuous casting of ultra-low carbon steels

    Gruber, N., 2024, MOLTEN 2024 Conference Proceedings: 12th International Conference on Molten Slags, Fluxes and Salts. Hayes, P. & Jak, E. (eds.). Carlton Victoria, Australia, Vol. 3/2024. p. 979-996 18 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  25. Published

    Ein mineralisches Bindemittel auf Basis Olivin

    Lackner, L., 2024

    Research output: Thesis › Master's Thesis

  26. Published

    Thermomechanische Charakterisierung eines feuerfesten Alumina Carbon Materials

    Bleidt, M., 2024

    Research output: Thesis › Master's Thesis

  27. 2023
  28. Published

    Large mechanical properties enhancement in ceramics through vacancy-mediated unit cell disturbance

    Chen, Z., Huang, Y., Koutná, N., Gao, Z., Sangiovanni, D., Fellner, S., Haberfehlner, G., Jin, S., Mayrhofer, P. H., Kothleitner, G. & Zhang, Z., 16 Dec 2023, In: Nature Communications. 14.2023, 1, 11 p., 8387.

    Research output: Contribution to journal › Article › Research › peer-review

  29. E-pub ahead of print

    Untersuchung der Performance eines fluorfreien Gießpulvers auf einer Pilotanlage

    Riedler, S., Gruber, N., Marschall, I., Ilie, V.-S. & Klösch, G., 27 Oct 2023, (E-pub ahead of print) In: Berg- und hüttenmännische Monatshefte : BHM. 168.2023, 11, p. pages 515–520 6 p.

    Research output: Contribution to journal › Article › Research

  30. Published

    Einfluss von Kohlenstoff auf das Aufschmelzverhalten eines Gießpulvers bei hohen Heizraten

    Gruber, N., 25 Oct 2023, In: Berg- und hüttenmännische Monatshefte : BHM. 168.2023, 10, p. 521–526 6 p.

    Research output: Contribution to journal › Article › Research

  31. Published

    Analyzing crack deflection behavior of refractories by digital image correlation

    Fruhstorfer, J., Gruber, D. & Harmuth, H., 12 Sept 2023, In: AIP Conference Proceedings. 2894, 1, 020002.

    Research output: Contribution to journal › Conference article › peer-review

  32. Published

    Liquefaction Controlling Components and Their Effect on Carbon-Free Mold Powders

    Gruber, N., 30 Aug 2023, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 54.2023, December, p. pages 3092–3100 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Dissolution of Magnesia in Silicate Melts and Diffusivity Determination from CLSM Studies

    Burhanuddin, B. & Harmuth, H., 21 Jul 2023, In: Applied Sciences : open access journal. 13.2023, 14, p. 8458 8 p., 8458.

    Research output: Contribution to journal › Article › Research › peer-review

  34. E-pub ahead of print

    Morphology characterization for refractory aggregates

    Wu, M. & Jin, S., 14 Jul 2023, (E-pub ahead of print) In: Open ceramics. 15.2023, September, 7 p., 100408.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Calculation of mass transfer for rotating finger test equipment

    Burhanuddin, B., Harmuth, H. & Guarco, J., 4 Jul 2023.

    Research output: Contribution to conference › Presentation › Research

  36. Published

    Evaluation of Slag Foaming Behavior Using Renewable Carbon Sources in Electric Arc Furnace-Based Steel Production

    Kieush, L., Schenk, J., Koveria, A., Hrubiak, A., Hopfinger, H. & Zheng, H., 12 Jun 2023, In: Energies. 16.2023, 12, 25 p., 4673.

    Research output: Contribution to journal › Article › Research › peer-review

  37. E-pub ahead of print

    Nanoscale toughening of low carbon Al2O3-C refractories by means of SiCnw/Al2O3 composite reinforcement

    Chong, X., Luo, J., Ding, D., Jin, S. & Xiao, G., 9 Jun 2023, (E-pub ahead of print) In: Journal of the American Ceramic Society. 106.2023, 11, p. 6891-6910 20 p.

    Research output: Contribution to journal › Article › Research › peer-review

  38. E-pub ahead of print

    A methodology for performing and evaluating miniaturized wedge splitting tests accompanied by digital image correlation

    Fruhstorfer, J. & Gruber, D., 30 May 2023, (E-pub ahead of print) In: Engineering Fracture Mechanics. 288.2023, 4 August, 15 p., 109357.

    Research output: Contribution to journal › Article › Research › peer-review

  39. E-pub ahead of print

    Creep strain recovery of an in situ spinel-forming refractory castable under loading/unloading compressive creep conditions

    Akbari, B., Gruber, D., Jin, S. & Harmuth, H., 17 May 2023, (E-pub ahead of print) In: Ceramics International. 49.2023, 15, p. 25225-25231 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  40. E-pub ahead of print

    Determination of cohesion and friction angle of a MgO-C refractory at room and elevated temperatures

    Klopf, M. & Gruber, D., 9 May 2023, (E-pub ahead of print) In: Open ceramics. 14.2023, June, 6 p., 100369.

    Research output: Contribution to journal › Article › Research › peer-review

  41. E-pub ahead of print

    Anisotropy of fracture mechanical properties of carbon-containing refractories and its impact on cracking in a steel ladle lining

    Gruber, D., Schachner, S. & Harmuth, H., 2 May 2023, (E-pub ahead of print) In: Open ceramics. 14.2023, June, 5 p., 100363.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Utilization of Renewable Carbon in Electric Arc Furnace-Based Steel Production: Comparative Evaluation of Properties of Conventional and Non-Conventional Carbon-Bearing Sources

    Kieush, L., Schenk, J., Koveria, A., Rantitsch, G., Hrubiak, A. & Hopfinger, H., 6 Apr 2023, In: Metals. 13.2023, 4, 16 p., 722.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Auswirkung der Reduktion des SiC-Gehalts eines Gießpulvers auf dessen Aufschmelzverhalten

    Lintner, K., 2023

    Research output: Thesis › Master's Thesis

  44. Published

    Implementierung einer klinkerärmeren Zementsorte CEM II/B-M 42,5N mit getrennter Mahlung von Kalkstein

    Erlacher, T., 2023

    Research output: Thesis › Master's Thesis

  45. Published

    Optimization of Operation Conditions for Refractory Corrosion Tests in a High Frequency Induction Furnace

    Wagner, M., 2023

    Research output: Thesis › Master's Thesis

  46. Published

    Preparation of Al2O3-SiO2-SiC Castable for KR Stirring Head and Multiphase Flow Numerical Simulation of Desulfurization Process

    Li, Z., 2023

    Research output: Thesis › Master's Thesis

  47. Published

    Simulation and Post-mortem Studies: The Holistic Approach for Optimized and Engineered Lining Concepts

    Gregurek, D., Unterreiter, G., Lind, C. & Spanring, A., 2023, The Minerals, Metals & Materials Series.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  48. Published

    Synthesis of Yttrium Ferrite Near Infrared Reflective Materials

    Li, Y., 2023

    Research output: Thesis › Master's Thesis

  49. Published

    Untersuchung zur Klärung der Struktur von nichtmetallischen Einschlüssen im Stahl

    Theussl, O., 2023

    Research output: Thesis › Master's Thesis

  50. 2022
  51. Published

    Quantification of Magnesia Dissolution in Silicate Melts and Diffusivity Determination Using Rotating Finger Test

    Burhanuddin, B., Harmuth, H. & Vollmann, S., 13 Dec 2022, In: Applied Sciences : open access journal. 12.2022, 24, 13 p., 12791.

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Effect of carbon on the melting behavior of a mold powder under high heating rates

    Gruber, N., Dec 2022.

    Research output: Contribution to conference › Presentation › Research

  53. Published

    Method for inverse calculation of erosion parameters in slag-refractory systems

    Guarco, J., Vollmann, S., Harmuth, H. & Burhanuddin, B., Dec 2022, In: Materials Today Communications. 33.2022, December, 10 p., 104736.

    Research output: Contribution to journal › Article › Research › peer-review

  54. E-pub ahead of print

    Thermal expansion and Young's modulus evolution of fused silica and crystalline silica-containing materials

    Yin, Y., Jin, S., Zhu, Q., Dai, Y., Li, Y. & Xia, Z., 30 Nov 2022, (E-pub ahead of print) In: International journal of applied ceramic technology. 20.2023, 3, p. 1875-1886 12 p.

    Research output: Contribution to journal › Comment/debate › peer-review

  55. Published

    Discrete Element Modelling of Cold Crushing Tests Considering Various Interface Property Distributions in Ordinary Refractory Ceramics

    Du, W. & Jin, S., 31 Oct 2022, In: Materials. 15.2022, 21, 18 p., 7650.

    Research output: Contribution to journal › Article › Research › peer-review

  56. E-pub ahead of print

    Multi-Response Optimization of the Thermal and Thermomechanical Behavior of a Steel Ladle Lining using Grey Relational Analysis and Technique for Order Preference by Similarity to Ideal Solution

    Hou, A., Gruber, D. & Jin, S., 23 Sept 2022, (E-pub ahead of print) In: Steel research international. 94.2023, 1, 10 p., 2200407.

    Research output: Contribution to journal › Article › Research › peer-review

  57. Published

    Influence of the Fine Fraction and Sintering on Selected Isotropic and Anisotropic Bulk Properties of Uniaxial Compacts

    Fruhstorfer, J., Wagner, M., Gruber, D. & Harmuth, H., 14 Sept 2022, In: Interceram. 71.2022, September, p. 38-47 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  58. E-pub ahead of print

    Effect of microporous aggregates and spinel powder on fracture behavior of magnesia-based refractories

    Yan, J., Dai, Y., Yan, W., Jin, S., Wang, X. & Li, Y., 13 Sept 2022, (E-pub ahead of print) In: Journal of the European Ceramic Society. 42.2022, 16, p. 7648-7655 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  59. E-pub ahead of print

    Zirconium oxycarbides and oxycarbonitrides: A review

    Kucheryavaya, A., Lenčéš, Z., Šajgalík, P. & Harmuth, H., 30 Aug 2022, (E-pub ahead of print) In: International journal of applied ceramic technology. 20.2023, 2, p. 541-562 22 p.

    Research output: Contribution to journal › Article › Research › peer-review

  60. E-pub ahead of print

    Sherwood correlation for finger-test experiments

    Guarco, J., Burhanuddin, Vollmann, S. & Harmuth, H., 27 Aug 2022, (E-pub ahead of print) In: Results in Engineering. 15.2022, September, 5 p., 100610.

    Research output: Contribution to journal › Article › Research › peer-review

  61. Published

    Image-processing-based automatic crack detection and classification for refractory evaluation

    Wang, G., Tan, F., Jin, S., Pan, L., He, Z., Wang, X., Li, Y. & Li, J., 15 Aug 2022, In: Ceramics International. 48.2022, 16, p. 23232-23240 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  62. Published

    Creep characterization and modelling of ordinary refractory ceramics under combined compression and shear loading conditions

    Schachner, S., Jin, S., Gruber, D. & Harmuth, H., 1 Aug 2022, In: Ceramics International. 48.2022, 15, p. 21101-21109 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  63. Published

    Mixed-mode fracture behaviour of refractories with asymmetric wedge splitting test: Part II: Experimental case study

    Dai, Y. J., Jin, S., Zhou, R., Li, Y. W., Harmuth, H. & Tschegg, E. K., 15 Jul 2022, In: Ceramics International. 48.2022, 14, p. 19757-19766 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  64. Published

    Mixed-mode fracture behaviour of refractories with asymmetric wedge splitting test: Part I: Numerical implementation and validation

    Dai, Y., Jin, S., Li, Y. W., Wang, Q., Zhou, W. & Harmuth, H., 15 Jul 2022, In: Ceramics International. 48.2022, 14, p. 19767-19775 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  65. E-pub ahead of print

    Improving Tapping Experience — and Why to Choose a Comprehensive Approach

    Gregurek, D., Wenzl, C., Unterreiter, G., Vukovic, G. & Marschall, H. U., 8 Jul 2022, (E-pub ahead of print) In: JOM. 74.2022, 11, p. 3999–4008 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  66. Published

    Corrigendum to “Asymmetric creep modeling of common refractory ceramics with high temperature wedge splitting test” [Eng. Fract. Mech. 25 (2021) 107819

    Jin, S. & Harmuth, H., Jul 2022, 1 p.

    Research output: Other contribution › Research

  67. Published

    Contributions to Crack Propagation in Coarse Grained Refractories

    Gruber, D. & Harmuth, H., 22 Jun 2022.

    Research output: Contribution to conference › Presentation › Research

  68. Published

    Discrete element modelling of ordinary refractory ceramics under cold crushing testing: Influence of minimum element size

    Du, W., Jin, S., Emam, S., Gruber, D. & Harmuth, H., 15 Jun 2022, In: Ceramics International. 48.2022, 12, p. 17934-17941 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  69. Published

    Evaluation of CLSM measurements for dissolution studies: A case study investigating alumina dissolution in a silicate slag

    Harmuth, H. & Burhanuddin, B., 14 Jun 2022, In: Ceramics International. 48.2022, 19 Part A, p. 28174-28180 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  70. Published

    Melting Rate Determination of Mold Powders: Continuous Casting Process Versus Laboratory Conditions

    Kölbl, N., 17 May 2022, In: Frontiers in Materials. 9.2022, May, 8 p., 881168.

    Research output: Contribution to journal › Article › Research › peer-review

  71. Published

    Fracture energy determination of carbon containing refractories with consideration of the creep behaviour

    Gruber, D., 6 May 2022.

    Research output: Contribution to conference › Presentation › Research

  72. Published

    Method for determination of mass transfer coefficients for dissolution of dense ceramics in liquid slags

    Guarco, J., Harmuth, H. & Vollmann, S., 1 May 2022, In: International journal of heat and mass transfer. 186.2022, 1 May, 11 p., 122494.

    Research output: Contribution to journal › Article › Research › peer-review

  73. E-pub ahead of print

    Thermomechanical finite element modeling of steel ladle containing alumina spinel refractory lining

    Samadi, S., Jin, S., Gruber, D. & Harmuth, H., 1 Apr 2022, (E-pub ahead of print) In: Finite elements in analysis and design. 206.2022, 1 September, 10 p., 103762.

    Research output: Contribution to journal › Article › Research › peer-review

  74. Published

    Method for determination of effective binary diffusivities in dissolution of dense ceramic materials

    Guarco, J., Burhanuddin, B., Vollmann, S. & Harmuth, H., 15 Mar 2022, In: Ceramics International.

    Research output: Contribution to journal › Article › Research › peer-review

  75. Published

    Application of an improved testing device for the study of alumina dissolution in silicate slag

    Burhanuddin, B., Guarco, J., Harmuth, H. & Vollmann, S., 2 Mar 2022, In: Journal of the European Ceramic Society. 42.2022, 8, p. 3652-3659 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  76. E-pub ahead of print

    Numerical study of creep effect on purging plug performance under cyclic service

    Tan, F. G., Jin, S. L., He, Z., Liang, X., Li, Y. W. & Li, J., 25 Feb 2022, (E-pub ahead of print) In: Journal of iron and steel research international. 2022, 25 February, 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  77. Published

    Investigation of three-stage compressive creep of a spinel forming refractory castable containing 8% MgO

    Akbari, B., Gruber, D., Jin, S. & Harmuth, H., 1 Feb 2022, In: Ceramics International : CI. 48.2022, 3, p. 3287-3292 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  78. E-pub ahead of print

    Automatic Detection of Slag Eye Area Based on a Hue-Saturation-Value Image Segmentation Algorithm

    Wang, G., Tan, F., Jin, S., He, Z., Li, Y. & Li, J., 7 Jan 2022, (E-pub ahead of print) In: JOM. 74.2022, 8, p. 2921-2929 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  79. Published

    Neuromelt model for estimating mold flux melting behaviour

    Vargas Hernandez, M., Mapelli, C., Cho, J., Kölbl, N., Marschall, I., Alloni, M. & Carli, R., Jan 2022, In: Metallurgia Italiana. 2022, 1, p. 23-31 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  80. Published

    Significance of an inclined plane test for mould slag assessment

    Marschall, I., Harmuth, H. & Kircher, V., Jan 2022, In: Metallurgia Italiana. 2022, 1, p. 14-22 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  81. Published

    Application of Artificial Neural Network to Predict the Thermal and Thermomechanical Behavior of Refractory Linings

    Hou, A., Jin, S., Gruber, D. & Harmuth, H., 2022, 2022 International Joint Conference on Neural Networks, IJCNN 2022 - Proceedings. Institute of Electrical and Electronics Engineers, (Proceedings of the International Joint Conference on Neural Networks; vol. 2022-July).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  82. Published

    DETERMINATION OF SECONDARY CREEP STAGE PARAMETERS OF SHAPED ALUMINA SPINEL REFRACTORY WITH AID OF GENETIC ALGORITHM

    Samadi, S., Jin, S., Gruber, D. & Harmuth, H., 2022.

    Research output: Contribution to conference › Paper › peer-review

  83. Published

    Digital Image Analysis of oxide particle dissolution in slags observed by HT-LSCM

    Lenzhofer, F., 2022

    Research output: Thesis › Master's Thesis

  84. Published

    Experimental studies of alumina and magnesia dissolution in silicate and aluminate melts

    Burhanuddin, B., 2022, 103 p.

    Research output: Thesis › Doctoral Thesis

  85. Published

    Finite Elemente Simulationen als Beitrag zur Optimierung einer Pfannenzustellung

    Kasper, R., 2022

    Research output: Thesis › Master's Thesis

  86. Published

    Investigation of the performance of a fluorine free mold powder at a pilot plant

    Riedler, S., Gruber, N., Marschall, I., Klösch, G. & Ilie, S., 2022.

    Research output: Contribution to conference › Abstract

  87. Published

    Prüfung der Eignung von Gießpfannenschlacken für den Einsatz als Substitut für Hüttensand in Zementen

    Bjelic, M., 2022

    Research output: Thesis › Master's Thesis

  88. Published

    Simulation of refractory wear by melts and calculation of wear parameters

    Guarco, J., 2022

    Research output: Thesis › Doctoral Thesis

  89. Published

    Thermomechanische Simulation eines zylinderförmigen Laborofens mittels Einheitszellen-Ansatz

    Haller, J., 2022

    Research output: Thesis › Master's Thesis

  90. Published

    Untersuchung des Einflusses von Silikat/Borat-Additiven auf die Eigenschaften und Phasenzusammensetzung von feuerfesten MgO-C Baustoffen

    Glanzer, M., 2022

    Research output: Thesis › Master's Thesis

  91. 2021
  92. Published

    Graphene-Reinforced Carbon-Bonded Coarse-Grained Refractories

    Storti, E., Fruhstorfer, J., Luchini, B., Jiříčková, A., Jankovský, O. & Aneziris, C., 27 Dec 2021, In: Materials. 15.2022, 1, 19 p., 186.

    Research output: Contribution to journal › Article › Research › peer-review

  93. Published

    Significance of an inclined plane test for mould slag assessment

    Marschall, I., Harmuth, H. & Kircher, V., 20 Oct 2021, Proceedings of the 10th European Conference on Continuous Casting. Mailand: Associazione Italiana di Metallurgia, 9 p. CC_017

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  94. Published

    Significance of an inclined plane test for mould slag assessment

    Marschall, I. & Harmuth, H., 20 Oct 2021.

    Research output: Contribution to conference › Presentation › Research

  95. Published

    Neuromelt model for estimating mold flux melting behaviour

    Vargas Hermandez, M., Mapelli, C., Cho, J., Kölbl, N., Marschall, I., Alloni, M. & Carli, R., 14 Oct 2021, Proceedings of the 10th European Conference on Continuous Casting. Associazione Italiana di Metallurgia, 039

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  96. Published

    Application of liquid-liquid mass transfer for a steel ladle

    Doletschek, M., Vollmann, S. & Harmuth, H., 6 Oct 2021, STEELSIM 2021, 9th International Conference on Modeling and Simulation of Metallurgical Processes in Steelmaking-STEELSIM2021. p. 8 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  97. Published

    Break Temperature Measurement and an Automated Evaluation Method

    Kölbl, N., Oct 2021, Proceedings of the 10th European Continuous Casting Conference. Mailand: Associazione Italiana di Metallurgia, 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  98. Published

    Combined damaged elasticity and creep modeling of ceramics with wedge splitting tests

    Samadi, S., Jin, S. & Harmuth, H., 15 Sept 2021, In: Ceramics International. 47.2021, 18, p. 25846-25853 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  99. Published

    Phase formation in MgO-C refractories with different antioxidants

    Atzenhofer, C. & Harmuth, H., 27 Aug 2021, In: Journal of the European Ceramic Society. 41.2021, 14, p. 7330-7338 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  100. Published

    Numerical Analysis of the Irreversible Behavior of Corundum Castable Purging Plugs During Service

    Tan, F., Jin, S., He, Z. & Li, Y., 17 Aug 2021, In: JOM. 73.2021, 10, p. 2911-2919 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  101. Published

    ParSD — Tool to design and analyze particle size distributions

    Fruhstorfer, J., 7 Jul 2021, In: SoftwareX. 15.2021, July, 5 p., 100753.

    Research output: Contribution to journal › Article › Research › peer-review

  102. Published

    Asymmetric creep modeling of common refractory ceramics with high temperature wedge splitting test

    Jin, S. & Harmuth, H., Jul 2021, In: Engineering Fracture Mechanics. 252.2021, July, 12 p., 107819.

    Research output: Contribution to journal › Article › Research › peer-review

  103. Published

    Influence of the particle size distribution of coarse-grained refractories on the thermal shock performance

    Fruhstorfer, J., Jul 2021, In: Journal of the Australian Ceramic Society. 57.2021, 3, p. 899-909 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  104. Published

    Investigation of calcium-aluminate-based mold flux of different compositions

    Marschall, I. & Harmuth, H., 10 Jun 2021, In: Steel research international. 93.2022, 3, 8 p., 2100187.

    Research output: Contribution to journal › Article › Research › peer-review

  105. Published

    A comparison of two damage models for inverse identification of mode I fracture parameters: Case study of a refractory ceramic

    Samadi, S., Jin, S., Gruber, D. & Harmuth, H., 1 May 2021, In: International Journal of Mechanical Sciences. 197, 1 May, 9 p., 106345.

    Research output: Contribution to journal › Article › Research › peer-review

  106. Published

    Design, operation and evaluation of an improved refractory wear testing technique

    Kircher, V., Burhanuddin & Harmuth, H., 17 Apr 2021, In: Measurement. 178.2021, June, 9 p., 109429.

    Research output: Contribution to journal › Article › Research › peer-review

  107. Published

    Numerical Investigations on Thermomechanical Behaviour of Purging Plug with Rectangular and Circular Slits

    Tan, F., He, Z., Jin, S., Wang, Q., Pan, L., Li, Y. & Li, B., 11 Apr 2021, In: ISIJ international. 61.2021, 4, p. 4-9 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  108. Published

    Investigation of Calcium Aluminate based Mold Slag Compositions

    Harmuth, H. & Marschall, I., 21 Feb 2021.

    Research output: Contribution to conference › Presentation › Research

  109. Published

    The femtosecond laser micro-processing of the field-emission tip arrays in single crystal CeB6

    Zhou, N., Zhang, W., Zhang, X., Liu, H., Liu, Q., Xiao, Y., Liu, Y., Jin, S. & Liao, N., Feb 2021, In: Vacuum. 184 , 8 p., 109929.

    Research output: Contribution to journal › Article › Research › peer-review

  110. Published

    Advanced mechanical characterizations and thermomechanical modeling of shaped alumina spinel material in steel ladle

    Samadi, S., 2021

    Research output: Thesis › Doctoral Thesis

  111. Published

    Experimentelle Untersuchung der Auswirkungen des Kohlenstoffgehalts auf das Aufschmelzen von Gießpulvern

    Schweighofer, S., 2021

    Research output: Thesis › Master's Thesis

  112. Published

    In-plant observations and thermomechanical modeling of different vessel types applying an insulation layer

    Rebouillat, L. & Jin, S., 2021, AISTech 2021 - Proceedings of the Iron and Steel Technology Conference. Association for Iron and Steel Technology, AISTECH, p. 1667-1673 7 p. (AISTech - Iron and Steel Technology Conference Proceedings; vol. 2021-June).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  113. Published

    Mechanische Charakterisierung kohlenstoffhaltiger feuerfester Baustoffe bei hohen Temperaturen

    Stückelschweiger, M., 2021

    Research output: Thesis › Doctoral Thesis

  114. Published

    New mold slag compositions for the continuous casting of soft steels

    Kölbl, N., 2021.

    Research output: Contribution to conference › Abstract › peer-review

  115. Published

    New Mold Slag Compositions for the Continuous Casting of Soft Steels

    Kölbl, N., 2021, In: Steel research international. 2022, 93, p. 1-7 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  116. Published

    Structural optimization and design of purging plug for improving its service performance

    Tan, F. G., Jin, S. L., He, Z. & Li, Y. W., 2021, In: Journal of iron and steel research international. 29.2022, September, p. 628-635 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  117. Published

    Synthesis of ZrX (X=C,O,N) and its possible refractory applications

    Kucheryavaya, A., 2021

    Research output: Thesis › Doctoral Thesis

  118. Published

    Untersuchung von Flotationsabgängen als Ausgangsstoff zur Herstellung von alkali-aktivierten Bindemitteln

    Berner, M., 2021

    Research output: Thesis › Master's Thesis

  119. Published

    Viskositätsbestimmung von nicht newtonschen Schmelzen

    Ablasser, M., 2021

    Research output: Thesis › Master's Thesis

  120. 2020
  121. Published

    Experimental Investigation of the Tension and Compression Creep Behavior of Alumina-Spinel Refractories at High Temperatures

    Teixeira, L., Samadi, S., Gillibert, J., Jin, S., Sayet, T., Gruber, D. & Blond, E., 22 Sept 2020, In: Ceramics. 3.2020, 3, p. 372-383 12 p.

    Research output: Contribution to journal › Article › Transfer › peer-review

  122. E-pub ahead of print

    Modeling hydration of mine tailings: Production of hydraulic binders from alkali-activated materials

    Blanc, P., Lach, A., Lassin, A., Falah, M., Obenaus-Emler, R. & Guignot, S., 9 Sept 2020, (E-pub ahead of print) In: Cement and concrete research. 137.2020, November, 11 p., 106216.

    Research output: Contribution to journal › Article › Research › peer-review

  123. Published

    Creep Parameter Determination of a Shaped Alumina Spinel Refractory Using Statistical Analysis

    Samadi, S., Teixeira, L., Jin, S., Gruber, D. & Harmuth, H., Sept 2020.

    Research output: Contribution to conference › Paper

  124. Published

    Review of closed water loops with ore sorting and tailings valorisation for a more sustainable mining industry

    Kinnunen, P., Obenaus-Emler, R., Raatikainen, J., Guignot, S., Guimera, J., Ciroth, A. & Heiskanen, K., Aug 2020, In: Journal of Cleaner Production.

    Research output: Contribution to journal › Article › Research › peer-review

  125. E-pub ahead of print

    R-curves determination of ordinary refractory ceramics assisted by digital image correlation method

    Dai, Y., Harmuth, H., Jin, S., Gruber, D. & Yawei, L., 20 May 2020, (E-pub ahead of print) In: Journal of the European Ceramic Society. 40.2020, 13, p. 4655-4663 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  126. Published

    Physical Modeling Evaluation on Refining Effects of Ladle with Different Purging Plug Designs

    Tan, F., He, Z., Jin, S., Pan, L., Yawei, L. & Li, B., 25 Mar 2020, In: Steel research international. 91.2020, 6, 8 p., 1900606.

    Research output: Contribution to journal › Article › Research › peer-review

  127. Published

    Statistical study of compressive creep parameters of an alumina spinel refractory

    Samadi, S., Jin, S., Gruber, D., Harmuth, H. & Schachner, S., 1 Mar 2020, In: Ceramics International : CI. 46.2020, 10A, p. 14662-14668 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  128. Published

    Improvement of mechanical strength of alkali-activated materials using micro low-alumina mine tailings

    Falah, M., Ohenoja, K., Obenaus-Emler, R., Kinnunen, P. & Illikainen, M., Mar 2020, In: Construction & building materials (Construction and building materials).

    Research output: Contribution to journal › Article › Research › peer-review

  129. Published

    Assessment of mine tailings as precursors for alkali-activated materials for on-site applications

    Obenaus-Emler, R., Falah, M. & Illikainen, M., 25 Feb 2020, In: Construction & building materials (Construction and building materials). 246.2020, 10 p., 118470.

    Research output: Contribution to journal › Article › Research › peer-review

  130. Published

    Influence of crystallization on properties and microstructure of fused quartz bricks for hot repair of coke ovens

    Wei, W., Yonghe, L., Yucheng, Y., Shengli, J., Jianhua, N., Wei, C., Jian, Z. & Cailiao, N., Jan 2020, In: Naihuo-cailiao : shuangyuekan = Refractories. 54.2020, 1, p. 41-46 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  131. Published

    Mechanical and fracture investigation of magnesia refractories with acoustic emission-based method

    Dai, Y., Yawei, L., Jin, S., Harmuth, H., Yan, W. & Xu, X., Jan 2020, In: Journal of the European Ceramic Society. 40.2020, 1, p. 181-191 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  132. Published

    Creep behaviour of refractories under various loading conditions

    Schachner, S., 2020

    Research output: Thesis › Doctoral Thesis

  133. Published

    Fracture mechanical characterisation of model castables with wedge splitting tests

    Gull, R., 2020

    Research output: Thesis › Master's Thesis

  134. Published

    In-plant observations and thermomechanical modeling of different vessel types applying an insulation layer

    Rebouillat, L. & Jin, S., 2020, Proceedings of the Iron and Steel Technology Conference, AISTech 2020. p. 2226-2232 7 p. (AISTech - Iron and Steel Technology Conference Proceedings; vol. 3).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  135. Published

    Mechanical properties of a new class of MGO-C castables with extruded graphite pellets

    Paschek, G. H., 2020

    Research output: Thesis › Master's Thesis

  136. Published

    Mechanische Charakterisierung eines kohlenstoffgebundenen feuerfesten MgO-C Werkstoffes im Hochtemperaturbereich

    Bauer, T., 2020

    Research output: Thesis › Master's Thesis

  137. 2019
  138. Published

    Fracture behaviour of magnesia refractory materials in tension with the Brazilian test

    Dai, Y., Li, Y., Xu, X., zhu, Q., Yan, W., Jin, S. & Harmuth, H., Dec 2019, In: Journal of the European Ceramic Society. 39.2019, 16, p. 5433-5441 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  139. Published

    Thermomechanical Analysis of Purging Plugs by Applying Fluid–Solid Conjugate Heat Transfer Modeling

    Tan, F., He, Z., Jin, S., Cai, H., Li, B., Li, Y. & Harmuth, H., 1 Nov 2019, In: Steel research international. 90.2019, 11, 9 p., 1900213.

    Research output: Contribution to journal › Article › Research › peer-review

  140. E-pub ahead of print

    Fracture behavior of magnesia refractory materials under combined cyclic thermal shock and mechanical loading conditions

    Dai, Y., Li, Y., Jin, S., Harmuth, H. & Xu, X., 17 Oct 2019, (E-pub ahead of print) In: Journal of the American Ceramic Society. 103.2020, 3, p. 1956-1969 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  141. Published

    A method for steel ladle lining optimization applying thermomechanical modelling and Taguchi approaches

    Jin, S., Hou, A., Harmuth, H. & Gruber, D., 16 Oct 2019, Proceedings of UNITECR 2019: 16th Biennial Worldwide Congress. Yokohama, p. 1-4 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  142. Published

    Contributions to refractories creep characterisation

    Gruber, D., Jin, S., Schachner, S., Stückelschweiger, M. & Harmuth, H., 16 Oct 2019, Proceedings of UNITECR'19. Yokohama, p. 1-4 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  143. Published

    Contributions to refractories creep characterisation

    Gruber, D., Jin, S., Schachner, S., Stückelschweiger, M. & Harmuth, H., 16 Oct 2019.

    Research output: Contribution to conference › Presentation › Research

  144. Published

    Benefits of the addition of a structural insulation layer in the refractory lining of rotary kiln: Thermomechanical modeling and In-plant results

    Cole, D., Stover, E., Jin, S. & Rebouillat, L., 13 Oct 2019.

    Research output: Contribution to conference › Paper

  145. Published

    TOWARDS THE PREDICTION OF REFRACTORY EROSION BY LIQUID SLAGS AND METAL

    Leitold, C., Harmuth, H. & Vollmann, S., 26 Sept 2019, Supplier Industries enabling REFRACTORIES. p. 163-166 194 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  146. Published

    Effect of crystallization extent on fracture of fused silica bricks

    Wang, W., Liang, Y., Yin, Y., Nie, J. & Jin, S., 25 Sept 2019.

    Research output: Contribution to conference › Paper

  147. E-pub ahead of print

    Inverse Simulation of Fracture Parameters for Cement-Bonded Corundum Refractories

    Pan, L., He, Z., Li, Y., Li, B. & Jin, S., 4 Sept 2019, (E-pub ahead of print) In: JOM. 71.2019, 11, p. 3996-4004 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  148. Published

    Effects of Activator Properties and Curing Conditions on Alkali-Activation of Low-Alumina Mine Tailings

    Falah, M., Obenaus-Emler, R., Kinnunen, P. & Illikainen, M., 13 Aug 2019, In: Waste and biomass valorization. 11.2020, September, p. 5027–5039 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  149. Published

    Wedge-Splitting Test on Carbon-Containing Refractories at High Temperatures

    Stückelschweiger, M., Gruber, D., Jin, S. & Harmuth, H., 8 Aug 2019, In: Applied Sciences : open access journal. 9.2019, 16, 10 p., 3249.

    Research output: Contribution to journal › Article › Research › peer-review

  150. Published

    耐火材料力学行为表征方法研究进展

    Dai, Y., Li, Y. & Jin, S., 1 Aug 2019, In: Kuei Suan Jen Hsueh Pao / Journal of the Chinese Ceramic Society. 47.2019, 8, p. 1089-1094 6 p.

    Research output: Contribution to journal › Review article › peer-review

  151. Published

    Assessment of mine tailings as precursors for alkali-activated materials for on-site applications

    Obenaus-Emler, R., Falah, M. & Illikainen, M., Aug 2019.

    Research output: Contribution to conference › Paper › peer-review

  152. E-pub ahead of print

    Automated break temperature determination of mould slags for the continuous casting of steel based on temperature-dependent viscosity data

    Kölbl, N. & Harmuth, H., 25 Jul 2019, (E-pub ahead of print) In: Ironmaking and steelmaking. 47.2019, 8, p. 899-902 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  153. Published

    Influence of Variation/Response Space Complexity and Variable Completeness on BP-ANN Model Establishment: Case Study of Steel Ladle Lining

    Hou, A., Jin, S., Gruber, D. & Harmuth, H., 16 Jul 2019, In: Applied Sciences : open access journal. 9.2019, 14, 12 p., 2835.

    Research output: Contribution to journal › Article › Research › peer-review

  154. Published

    Modelling of a steel ladle and prediction of its thermomechanical behavior by finite element simulation together with artificial neural network approaches

    Hou, A., Jin, S., Gruber, D. & Harmuth, H., 4 Jul 2019, p. 1109 - 1116. 7 p.

    Research output: Contribution to conference › Paper

  155. Published

    A method to characterize asymmetrical three-stage creep of ordinary refractory ceramics and its application for numerical modelling

    Schachner, S., Jin, S., Gruber, D. & Harmuth, H., 6 Jun 2019, In: Journal of the European Ceramic Society. 39.2019, 14, p. 4384-4393 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  156. Published

    Thermal and Thermomechanical Responses Prediction of a Steel Ladle Using a Back-Propagation Artificial Neural Network Combining Multiple Orthogonal Arrays

    Hou, A., Jin, S., Harmuth, H. & Gruber, D., 29 Apr 2019, In: Steel research international. 2019, 8 p., 1900116.

    Research output: Contribution to journal › Article › Research › peer-review

  157. Published

    Geopolymers from mining tailings for more sustainable raw material supply

    Obenaus-Emler, R., Illikainen, M., Falah, M., Kinnunen, P. & Heiskanen, K., 22 Feb 2019, RICON17: REMINE International Conference Valorization of Mining and other Mineral Wastes into Construction Materials by Alkali-Activation. EDP Sciences, 5 p. 05001

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  158. Published

    Creep testing of carbon containing refractories under reducing conditions

    Stückelschweiger, M., Gruber, D., Jin, S. & Harmuth, H., 4 Feb 2019, In: Ceramics International : CI. 45.2019, 8, p. 9776-9781 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  159. Published

    Application of Some Digital Techniques to Optimize the Thermomechanical Behavior of Refractory Linings

    Hou, A., 2019

    Research output: Thesis › Doctoral Thesis

  160. Published

    Chemische und mineralogische Charakterisierung sekundärmetallurgischer Schlacken

    Klopf, M., 2019

    Research output: Thesis › Master's Thesis

  161. Published

    Degradation of refractories in non-ferrous metallurgy

    Gregurek, D., 2019

    Research output: Thesis › Habilitation thesis › peer-review

  162. Published

    High-temperature investigation of mould slag crystallization by single and double hot thermocouple techniques

    Kölbl, N., Marschall, I. & Harmuth, H., 2019, In: Journal of iron and steel research international. 26.2019, 4, p. 345-354 9 p.

    Research output: Contribution to journal › Review article › peer-review

  163. Published

    Identification of secondary raw materials in mold powders and their melting behavior

    Marschall, I., Kölbl, N., Harmuth, H. & Atzenhofer, C., 2019, In: Journal of iron and steel research international. 26.2019, 4, p. 403-411 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  164. Published

    Investigation of calcium aluminate-based mould slag compositions

    Chen, C., 2019

    Research output: Thesis › Master's Thesis

  165. Published

    Investigation of new slag compositions for the continuous casting of soft steel

    Ye, A., 2019

    Research output: Thesis › Master's Thesis

  166. Published

    Keramikfunde: Belege für den Beginn und die Entwicklung der Besiedelung im Bezirk Liezen

    Presslinger, H., Eibner, C., Harmuth, H. & Atzenhofer, C., 2019, In: Da schau her. 2019, 1, p. 16-20 5 p.

    Research output: Contribution to journal › Article › Research

  167. Published

    Naturwissenschaftliche Untersuchungsergebnisse der Klaubproben vom mittelbronzezeitlichen Kupfererzverhüttungsplatz Greithbauer/KG Trieben/OG Trieben

    Presslinger, H., Eibner, C., Harmuth, H. & Atzenhofer, C., 2019, In: Da schau her. 40.2019, 3, p. 18-21 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  168. Published

    Untersuchung des Stoffübergangs in einer gasgespülten Stahlpfanne durch fluiddynamische Simulationen

    Doletschek, M., 2019

    Research output: Thesis › Doctoral Thesis

  169. Published

    Untersuchung verschiedener Flotationsabgänge in Hinblick auf die Verwendung als Rohstoff für alkali-aktivierte Bindemittel

    Simon, O., 2019

    Research output: Thesis › Master's Thesis

  170. Published

    Untersuchung von Flotationsabgängen zur Herstellung eines zementfreien Pumpversatzes

    Sachs, G., 2019

    Research output: Thesis › Master's Thesis

  171. 2018
  172. Published

    Effect of the phase transformation on fracture behaviour of fused silica refractories

    Dai, Y., Yin, Y., Xu, X., Jin, S., Li, Y. & Harmuth, H., 1 Dec 2018, In: Journal of the European Ceramic Society. 38, 16, p. 5601-5609 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  173. Published

    Specific fracture energy and de-agglomeration rate of silicate-bonded foundry sand cores

    Stauder, B., Gruber, D. & Schumacher, P., 11 Oct 2018, In: Production Engineering : research and development. 2018, 12(6), p. 807-816 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  174. Published

    Three stage creep behavior of MgO containing ordinary refractories in tension and compression

    Schachner, S., Jin, S., Gruber, D. & Harmuth, H., 13 Sept 2018, In: Ceramics International : CI.

    Research output: Contribution to journal › Article › Research › peer-review

  175. Published

    Thermomechanical Modelling of industrial linings

    Samadi, S. & Jin, S., Sept 2018.

    Research output: Contribution to conference › Poster › Research

  176. Published

    A Method for Steel Ladle Lining Optimization Applying Thermomechanical Modeling and Taguchi Approaches

    Hou, A., Jin, S., Harmuth, H. & Gruber, D., 9 Aug 2018, In: JOM. 70, 11, p. 2449 2456 p.

    Research output: Contribution to journal › Article › Research › peer-review

  177. Published

    Thermomechanical modelling of a torpedo car by considering working lining spalling

    Jin, S., Harmuth, H., Gruber, D., Buhr, A., Sinnema, S. & Rebouillat, L., 17 Jul 2018, In: Ironmaking and steelmaking. 0301-9233, 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  178. Published

    Modified DHTT Equipment for Crystallization Studies of Mold Slags

    Kölbl, N., Harmuth, H. & Marschall, I., 9 Apr 2018, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 2018, 49/4, p. 1898-1909 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  179. Published

    De-agglomeration rate of silicate bonded sand cores during core removal

    Stauder, B., Harmuth, H. & Schumacher, P., Feb 2018, In: Journal of materials processing technology. 252 (2018), 252, p. 652-658 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  180. Published

    Enhanced mechanical properties of Al2O3-C refractories with silicon hybridized expanded graphite

    Wang, Q., Li, Y., Jin, S., Sang, S., Xu, Y., Xu, X. & Wang, G., 2 Jan 2018, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 709, p. 160-171 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  181. Published

    Advanced creep testing of refractories providing new insight into material behaviour

    Jin, S., Harmuth, H., Gruber, D., Schachner, S., Meunier, P. & Techer, R., 2018, In: Refractories worldforum. 10, 2, p. 63-67

    Research output: Contribution to journal › Article › Research › peer-review

  182. Published

    Advanced measures to characterize mechanical properties of refractories

    Jin, S., Harmuth, H., Gruber, D. & Sidi Mammar, A., 2018, In: China's refractories. 27, 1, p. 8-13

    Research output: Contribution to journal › Article › Research

  183. Published

    An improved Double Hot Thermocouple Technique for Mold Slag Investigation

    Kölbl, N., Marschall, I. & Harmuth, H., 2018, AISTech 2018: Proceedings of the Iron & Steel Technology Conference : 7-10 May 2018, Philadelphia, Pa., U.S.A..

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  184. Published

    APPLICATION OF A MODIFIED DOUBLE HOT THERMOCOUPLE TECHNIQUE FOR MOLD SLAGS

    Kölbl, N., Marschall, I., Kircher, V. & Harmuth, H., 2018, Proceedings of the 7th international congress on science and technology of steelmaking. Associazione Italiana di Metallurgia

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  185. Published

    Compounds within the system Mg-Al-Si-O-C-N for novel refractory applications

    Atzenhofer, C., 2018

    Research output: Thesis › Doctoral Thesis

  186. Published

    Entwicklung calciumaluminatischer Gießschlacken unter Einbeziehung von Bor

    Prinz, G., 2018

    Research output: Thesis › Master's Thesis

  187. Published

    Entwicklung eines für die Herstellung mit dem Schleuderverfahren geeigneten Geopolymerbindemittels

    Mairitsch, E., 2018

    Research output: Thesis › Doctoral Thesis

  188. Published

    Integrated mineral technologies for more sustainable raw material supply (ITERAMS)

    Obenaus-Emler, R., Raatikainen, J., Sylvain Guignot, S., Heiskamen, K., Ciroth, A., Guimerà, J., Paajanen, M. & Kiunnen, P., 2018.

    Research output: Contribution to conference › Paper

  189. Published

    Integrated mineral technologies for more sustainable raw material supply (ITERAMS)

    Obenaus-Emler, R., Raatikainen, J., Guignot, S., Heiskanen, K., Ciroth, A., Guimera, J., Paajanen, M. & Kinnunen, P., 2018.

    Research output: Contribution to conference › Paper

  190. Published

    Investigation of Compressive Refractory Creep

    Jin, S. & Harmuth, H., 2018, In: China's refractories. 27, 3, p. 21-27 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  191. Published

    Keramik aus der Franz-Josephs-Grotte in Unterzeiring: die naturwissenschaftliche Bewertung eines bronzezeitlichen Keramikwerkstoffes

    Preßlinger, H., Eibner, C., Harmuth, H. & Atzenhofer, C., 2018, In: Da schau her. 2018, 3, p. 16-18 3 p.

    Research output: Contribution to journal › Article › Research

  192. Published

    Thermal and thermomechanical evaluations of channel induction furnace applying strong insulation containing lightweight aggregate

    Jin, S., Harmuth, H. & Gruber, D., 2018, In: Ironmaking and steelmaking. 2018, 45, p. 514-518 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  193. Published

    Towards closed water loops, ore sorting and tailings valorization for more sustainable raw material supply

    Obenaus-Emler, R., Kinnunen, P., Raatikainen, J., Guignot, S., Ciroth, A., Guimerà, J., Paajanen, M. & Heiskanen, K., 2018.

    Research output: Contribution to conference › Paper

  194. 2017
  195. Published

    Slag Rim Formation of two Mould Powders used for Casting of Construction Steel

    Marschall, I., Xia, G. & Kölbl, N., 14 Dec 2017, In: Berg- und hüttenmännische Monatshefte : BHM.

    Research output: Contribution to journal › Article › Research

  196. Published

    Determination of the fracture behaviour of MgO-refractories using multi-cycle wedge splitting test and digital image correlation

    Dai, Y., Gruber, D. & Harmuth, H., Dec 2017, In: Journal of the European Ceramic Society. 37.2017, 15, p. 5035-5043 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  197. Published

    Facile synthesis of SiOx spheres or dumbbell-shaped β-SiC whiskers on expanded graphite by silicon vapor deposition

    Wang, Q., Li, Y., Jin, S., Sang, S., Xu, Y., Wang, G. & Xu, X., 1 Nov 2017, In: Ceramics International : CI. 43.2017, 16, p. 13282-13289 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  198. Published

    Synergic effects of nano carbon sources on thermal shock resistance of Al2O3-C refractories

    Liao, N., Li, Y., Wang, Q., Zhu, T., Jin, S., Sang, S. & Jia, D., 1 Nov 2017, In: Ceramics International : CI. 43.2017, 16, p. 14380-14388 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  199. Published

    Correlation between chemical composition and alkali attack resistance of bauxite-SiC refractories in cement rotary kiln

    Bo, R., Yawei, L., Shengli, J. & Shaobai, S., Nov 2017, In: Ceramics International. 43.2017, 16, p. 14161-14167 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  200. Published

    Effects of catalysts state on the synthesis of MWCNTs modified expanded graphite through microwave-assisted pyrolysis of ethanol

    Liao, N., Li, Y., Jin, S., Liu, G., Wan, Q., Sang, S. & Su, D., 1 Oct 2017, In: Journal of materials science. 52.2017, 19, p. 11442-11452 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  201. Published

    Lightweight design of bauxite-SiC composite refractories as the lining of rotary cement kiln using alternative fuels

    Ren, B., Li, Y., Sang, S. & Jin, S., 1 Oct 2017, In: Ceramics International : CI. 43.2017, 14, p. 11048-11057 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  202. Published

    Fracture process zone development in a magnesia and a magnesia spinel refractory as observed by digital image correlation

    Gruber, D., Dai, Y. & Harmuth, H., 26 Sept 2017, Proceedings of UNITECR 2017: 26.9.2017-29.9.2017, Santiago de Chile, Chile. Santiago de Chile

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  203. Published

    Modelling and inverse investigation of the fracture process for a magnesia spinel refractory using a heterogeneous continuum model

    Dai, Y., Gruber, D., Harmuth, H. & Jin, S., Sept 2017, In: Engineering Fracture Mechanics. 182.2017, September, p. 438-448 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  204. Published

    Slag rim formation of two mold powders used for casting of construction steel

    Marschall, I., Xia, G. & Kölbl, N., 26 Jun 2017, Proceedings of 9th ECCC European Continuous Casting Conference - ECCC2017. ASMET, p. 605-614

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  205. Published

    Observation and quantification of the fracture process zone for two magnesia refractories with different brittleness

    Dai, Y., Gruber, D. & Harmuth, H., 1 Jun 2017, In: Journal of the European Ceramic Society. 37.2017, 6, p. 2521-2529 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  206. E-pub ahead of print

    Reduced brittleness of multi-walled carbon nanotubes (MWCNTs) containing Al2O3-C refractories with boron carbide

    Liao, N., Li, Y., Jin, S., Sang, S. & Liu, G., 12 May 2017, (E-pub ahead of print) In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 698.2017, 20 June, p. 80-87 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  207. Published

    Fracture behaviour and microstructure of refractory materials for steel ladle purging plugs in the system Al2O3-MgO-CaO

    Long, B., Xu, G., Buhr, A., Jin, S. & Harmuth, H., 26 Apr 2017, In: Ceramics International : CI. 43.2017, 13, p. 9679-9685 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  208. Published

    Enhanced formation of magnesium silica hydrates (M-S-H) using sodium metasilicate and caustic magnesia in magnesia castables

    Zhang, Y., Li, Y., Xu, Y., Sang, S. & Jin, S., 12 Apr 2017, In: Ceramics International : CI. 43.2017, 12, p. 9110-9116 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  209. Published

    Thermodynamic and Experimental Investigations of High-Temperature Refractory Corrosion by Molten Slags

    Wagner, C., Wenzl, C., Gregurek, D., Kreuzer, D., Luidold, S. & Schnideritsch, H., 1 Feb 2017, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 48.2017, February, p. 119-131 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  210. Published

    Advanced creep testing of refractories providing new insight into material behaviour

    Jin, S., 2017.

    Research output: Contribution to conference › Poster › Research

  211. Published

    Analyse eines bindemittelhaltigen Pumpversatzes

    Schall, M. & Moser, A., 2017, In: Berg- und hüttenmännische Monatshefte : BHM. 162, 6

    Research output: Contribution to journal › Article › Research

  212. Published

    Analyse und Optimierung der Versatzeigenschaften im Scheelit-Bergbau Mittersill

    Walkner, M., 2017

    Research output: Thesis › Master's Thesis

  213. Published

    Anwendung von Gebirgsklassifikationssystemen im untertägigen Bergbau

    Kirschner, P. & Moser, A., 2017, In: Berg- und hüttenmännische Monatshefte : BHM. 162, 6

    Research output: Contribution to journal › Article › Research

  214. Published

    Application of rock mass classification systems as a tool for rock mass strength determination

    Moser, A., 2017, Deep Mining 2017: Eighth International Conference on Deep and High Stress Mining.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  215. Published

    Challenges and limits of rock mass documentation and classification systems

    Moser, A., 2017, VIII International Research and Practice Conference “Innovations in Mining Enterprise Engineering: Geomechanical Tools in Planning, Design and Mining Operations”.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  216. Published

    Charakterisierung des Kristallisationsverhaltens einer fluorfreien Gießschlacke für den Strangguss von Stahl

    Schützeneder, A., 2017

    Research output: Thesis › Master's Thesis

  217. Published

    Combined Effects of Boron Carbide, Silicon, and MWCNTs in Alumina-Carbon Refractories on Their Microstructural Evolution

    Liao, N., Li, Y., Jin, S., Xu, Y., Sang, S. & Deng, Z., 2017, In: Journal of the American Ceramic Society. 100.2017, 1, p. 443-450 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  218. Published

    Comparison of Cement- and Hydratable Alumina-Bonded Alumina-Spinel Materials for Steel Ladle Purging Plugs

    Long, B., Buhr, A., Jung, I.-H., Jin, S., Harmuth, H. & Dutton, J., 2017, In: Refractories worldforum. 9, 3, p. 93-106 14 p.

    Research output: Contribution to journal › Article › Research

  219. Published

    Composition and properties of a metakaolin-based geopolymer binder suitable for shaping using a slinger

    Harmuth, H. & Mairitsch, E., 2017, Construction and Building Materials. p. 277-283

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  220. Published

    Compressive creep testing of carbon containing materials under reducing atmosphere

    Li, Y., 2017

    Research output: Thesis › Master's Thesis

  221. Published

    Fracture investigation of refractories under combined mode I and mode II loading

    Zhou, R., 2017

    Research output: Thesis › Master's Thesis

  222. Published

    Geotechnische Beurteilung eines untertägigen Bergbaues

    Schinagl, S. & Moser, A., 2017, In: Berg- und hüttenmännische Monatshefte : BHM. 162, 6

    Research output: Contribution to journal › Article › Research

  223. Published

    In situ Untersuchung der ersten Schmelzphasenbildung von infiltrierten Feuerfestprodukten mittels Hochtemperatur- Konfokalmikroskopie

    Riedler, S., 2017

    Research output: Thesis › Master's Thesis

  224. Published

    Main wear mechanisms of SEN slag band materials

    Harmuth, H., Kircher, V. & Kölbl, N., 2017, In: China's refractories. 26.2017, 1, p. 1-7 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  225. Published

    Measurement and simulation of refractory creep and fracture

    Jin, S., 2017

    Research output: Thesis › Habilitation thesis › peer-review

  226. Published

    Phase formation in Al2O3-C refractories with Al addition

    Atzenhofer, C., Gschiel, S. & Harmuth, H., 2017, In: Journal of the European Ceramic Society. 37.2017, 4, p. 1805-1810 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  227. Published

    Process zone in refractory ceramics

    Dai, Y., 2017

    Research output: Thesis › Doctoral Thesis

  228. Published

    Towards industrial vessel refractories lining design: a case study

    Jin, S., Harmuth, H. & Gruber, D., 2017.

    Research output: Contribution to conference › Paper

  229. Published

    Untersuchung des Schmelz-, Lösungs- und Kristallisationsverhaltens oxidisch-silikatischer Systeme mittels HT-LSCM

    Kircher, V., 2017

    Research output: Thesis › Doctoral Thesis

  230. Published

    Untersuchungen zum Bruchverhalten feuerfester Baustoffe mit einem Mini Keilspaltversuch

    Pressler, M., 2017

    Research output: Thesis › Master's Thesis

  231. 2016
  232. Published

    Assessment of thermal shock resistance by HMOR test with high heating rate

    Gruber, D., Sidi Mammar, A., Harmuth, H. & Grasset-Bourdel, R., 28 Sept 2016, 59th International Colloquium on Refractories - Refractories for Metallurgy. Aachen

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  233. Published

    Advanced Measures to Characterize the Mechanical Properties of Refracrories

    Jin, S., Harmuth, H., Gruber, D. & Sidi Mammar, A., 20 Sept 2016, Proceedings of the 7th International Symposium on Refractories ISR 2016, Xi'an, China, September 20-22, 2016. p. 1-6 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  234. Published

    Main Wear Mechanisms of SEN Slag Band Materials

    Harmuth, H., Kircher, V. & Kölbl, N., 20 Sept 2016, Proc. 7th International Conference on Refractories ISR 2016, Xi'an, China, September 20-22. p. 1-7 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  235. Published

    Stability of Magnesia bricks under the conditions of steel degassing – a case study

    Harmuth, H., 18 Sept 2016.

    Research output: Contribution to conference › Presentation › Research

  236. Published

    Stand der Technik der Versatztechnologie im untertägigen Bergbau

    Moser, A., Aug 2016, In: Berg- und hüttenmännische Monatshefte : BHM. 161, 8, p. 345-350 5 p., 8.

    Research output: Contribution to journal › Article › Research

  237. Published

    Irreversible thermodynamics applied to diffusional phase transformations

    Gamsjäger, E. & Kircher, V. (Co-editor), 29 Jun 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  238. Published

    Fundamental investigations for the design of fluorine free mold powder compositions

    Marschall, I., Yang, X. & Harmuth, H., 22 May 2016, Advances in Molten Slags, Fluxes, and Salts: Proceedings of the 10th International Conference on Molten Slags, Fluxes and Salts. Reddy, R. G., Chaubal, P., Pistorius, P. C. & Pal, U. (eds.). Seattle Washington USA, p. 299 306 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  239. Published

    Enhanced mechanical performance of Al2O3-C refractories with nano carbon black and in-situ formed multi-walled carbon nanotubes (MWCNTs)

    Liao, N., Li, Y., Jin, S., Sang, S. & Harmuth, H., 1 Feb 2016, In: Journal of the European Ceramic Society. 36.2016, 3, p. 867-874 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  240. E-pub ahead of print

    Thermomechanical failure modeling and investigation into lining optimization for a Ruhrstahl Heraeus snorkel

    Jin, S., Gruber, D., Harmuth, H. & Rössler, R., 28 Jan 2016, (E-pub ahead of print) In: Engineering Failure Analysis. 62.2016, April, p. 254-262 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  241. Published

    Tensile creep measurements of ordinary ceramic refractories at service related loads including setup, creep law, testing and evaluation procedures

    Sidi Mammar, A., Gruber, D., Harmuth, H. & Jin, S., 14 Jan 2016, In: Ceramics International : CI. 42.2016, 1 May, p. 6791-6799 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  242. Published

    An experimental study to investigate the interaction of backfill and rock mass

    Moser, A., 2016.

    Research output: Contribution to conference › Paper › peer-review

  243. Published

    An experimental study to investigate the interaction of backfill and rock mass

    Moser, A., 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  244. Published

    Herstellung und Untersuchung von MgAlON gebundenen Feuerfestprodukten

    Sieger, M., 2016

    Research output: Thesis › Master's Thesis

  245. Published

    Investigation of High Temperature Tensile Creep of Refractories

    Sidi Mammar, A., 2016

    Research output: Thesis › Doctoral Thesis

  246. Published

    Mechanical behaviour of refractories

    Gruber, D., 2016

    Research output: Thesis › Habilitation thesis › peer-review

  247. Published

    The Influence of Al and Si Additives on the Microstructure and Mechanical Properties of Low-Carbon MgO-C Refractories

    Zhu, T., Li, Y., Jin, S. & Sang, S. B., 2016, In: Journal of ceramic science and technology. 7, 1, p. 127-134

    Research output: Contribution to journal › Article › Research › peer-review

  248. Published

    Thermal shock resistance of magnesia spinel refractories—Investigation with the concept of configurational forces

    Gruber, D., Sistaninia, M., Fasching, C. & Kolednik, O., 2016, In: Journal of the European Ceramic Society. 36, p. 4301-4308 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  249. 2015
  250. Published

    Catalyst-free hybridization of silicon carbide whiskers and expanded graphite by vapor deposition method

    Wang, Q., Li, Y., Jin, S. & Sang, S., Dec 2015, In: Ceramics International : CI. 41, 10, p. 14359-14366

    Research output: Contribution to journal › Article › Research › peer-review

  251. Published

    Correlation of pore structure and alkali vapor attack resistance of bauxite-SiC composite refractories

    Ren, B., Sang Shaobai, Li Yawei & Jin, S., Dec 2015, In: Ceramics International : CI. 41, 10, p. 14674-14683

    Research output: Contribution to journal › Article › Research › peer-review

  252. Published

    Thermography and complementary measurements as tools to detect micro-irregularities in electronic components

    Röhrig, S., Petschenig, I., Bermejo, R., Hofstätter, M., Aldrian, F., Danzer, R. & Supancic, P., Dec 2015, In: Journal of ceramic science and technology. 6, 4, p. 255-260 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  253. Published

    Effect of the reactivity and porous structure of expanded graphite (EG) on microstructure and properties of Al2O3-C refractories

    Wang, Q., Li, Y., Sang, S. & Jin, S., 5 Oct 2015, In: Journal of alloys and compounds. 645, p. 388-397

    Research output: Contribution to journal › Article › Research › peer-review

  254. Published

    Simulation of micro-crack formation in a magnesia spinel refractory during the production process

    Fasching, C., Gruber, D. & Harmuth, H., 25 Aug 2015, In: Journal of the European Ceramic Society. 35, p. 4593-4601 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  255. Published

    Catalytic formation of one-dimensional nanocarbon and MgO whiskers in low carbon MgO-C refractories

    Zhu, T., Li, Y., Jin, S., Sang, S. & Liao, N., Apr 2015, In: Ceramics International : CI. 41, 3, p. 3541-3548

    Research output: Contribution to journal › Article › Research › peer-review

  256. Published

    Influence of creep on the thermomechanical behavior of a rh-snorkel

    Jin, S., Harmuth, H., Gruber, D. & Rössler, R., 1 Jan 2015.

    Research output: Contribution to conference › Paper › peer-review

  257. Published

    Anwendung der Double Hot Thermocouple Technique zur Charakterisierung von Schlacken

    Stroißnigg, M., 2015

    Research output: Thesis › Master's Thesis

  258. Published

    Assessment of thermal shock resistance by hmor test with high heating rate

    Sidi Mammar, A., Harmuth, H., Gruber, D. & Grasset-Bourdel, R., 2015.

    Research output: Contribution to conference › Poster › Research › peer-review

  259. Published

    Assessment of thermal shock resistance by HMOR test with high heating rate

    Sidi Mammar, A., Harmuth, H., Gruber, D. & Grasset-Bourdel, R., 2015, UNITECR 2015. Wien, 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  260. Published

    Creep Modeling of Magnesia-chromite Bricks in a RH Snorkel During a Process Cycle

    Jin, S., Harmuth, H., Gruber, D. & Roessler, R., 2015, In: China's refractories. 24, 1, p. 22-25

    Research output: Contribution to journal › Article › Research › peer-review

  261. Published

    Entwicklung eines Verfahrens zur Beurteilung des Langzeitverhaltens gipsgebundener Putzträgerplatten für den Außenbereich unter zyklischer Feuchte- und Trocknungsbeanspruchung

    Stückelschweiger, M., 2015

    Research output: Thesis › Master's Thesis

  262. Published

    Firing research for refractories in steel ladle applications

    Parr, C., Harmuth, H., Pandolfelli, V., Poirrier, J., Rigaud, M. & Sinnema, S., 2015, UNITECR 2015. 14th Biennial Worldwide Congress (ed.). Wien, 5 p. 239

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  263. Published

    Growth and shrinkage of particles in slags

    Gamsjäger, E., Kircher, V. & Harmuth, H. (Co-editor), 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  264. Published

    HIGH TEMPERATURE MICROSCOPIC INVESTIGATIONS IN THE FIELD OF CERAMICS – AN OVERVIEW

    Kircher, V., Kölbl, N., Marschall, I. & Harmuth, H., 2015, Mitteilungen der Österreichischen Mineralogischen Gesellschaft. Ö. M. G. (ed.). Wien: Eigenverlag, Vol. 161. p. 59 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  265. Published

    Impact of steel ladle preheating on the decarburization of a MgO-C refractory lining

    Drozd-Rys, M., 2015

    Research output: Thesis › Doctoral Thesis

  266. Published

    INFLUENCE OF CREEP ON THE THERMOMECHANICAL BEHAVIOR OF A RH-SNORKEL

    Jin, S., Harmuth, H. (Co-editor), Gruber, D. (Co-editor) & Roessler, R. (Co-editor), 2015, UNITERC 2015.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  267. Published

    Influence of specimen shape and the specimen/pressure plate interface on the cold crushing strength

    Gruber, D., Harmuth, H., Urbanek, G. & Sharma, V., 2015, UNITECR 2015. 14th Biennial Worldwide Congress (ed.). Wien, 5 p. 96

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  268. Published

    In situ observation of slag crystallization

    Kölbl, N., Harmuth, H. & Kircher, V., 2015, Mitteilungen der Österreichischen Mineralogischen Gesellschaft. Österreichische Mineralogische Gesellschaft (ed.). Wien: Eigenverlag, Vol. 161. p. 64 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  269. Published

    In situ observation of slag crystallization

    Kölbl, N., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  270. Published

    Interaction steel/slag/submerged entry nozzle and its impact on refractory wear - thermochemical process simulation

    Harmuth, H. & Xia, G., 2015, In: ISIJ international. 55, 4, p. 775-780 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  271. Published

    Investigation of compressive refractory creep

    Jin, S., 2015

    Research output: Thesis › Doctoral Thesis

  272. Published

    Investigation of Magnesia Chromite Brick Wear Phenomena - Post Mortem Analysis From a Lead Recycling Furnace

    Gregurek, D., Majcenovic, C., Reinharter, K., Reiter, V., Wenzl, C., Spanring, A. & Harmuth, H., 2015, In: RHI bulletin : the journal of refractory innovations. 2/2015, p. 24-28 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  273. Published

    Investigation of refractories for the bottom casting of special steel grades / Untersuchung von Feuerfeststoffen für den steigenden Guss von Spezialstählen

    Auer, T., Harmuth, H. & Löcker, C., 2015. 1 p.

    Research output: Contribution to conference › Paper › peer-review

  274. Published

    Mikromechanische Simulation der Gefügeausbildung und der Eigenschaften einer Magnesia-Spinell Keramik

    Fasching, C., 2015

    Research output: Thesis › Doctoral Thesis

  275. Published

    Nonoxides in ordinary refractory ceramics - phases, compositions and analysis

    Atzenhofer, C., Gschiel, S. & Harmuth, H., 2015, Mitteilungen der Österreichischen Mineralogischen Gesellschaft. Österreichische Mineralogische Gesellschaft (ed.). Wien: Eigenverlag, Vol. 161. p. 17 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  276. Published

    Nonoxides in ordinary refractory ceramics - phases, compositions and analysis

    Atzenhofer, C., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  277. Published

    Phase formation in mould powders and mould slags during service

    Marschall, I. & Harmuth, H., 2015, Mitteilung der Österreichischen Mineralogischen Gesellschaft. Österreichische Mineralogische Gesellschaft (ed.). Wien: Eigenverlag, Vol. 161. p. 83 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  278. Published

    Phase formation in mould powders and mould slags during service

    Marschall, I. & Harmuth, H., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  279. Published

    Premature wear in the hearth of a blast furnance and its diminution by the application of titanium dioxide

    Fünders, D., Harmuth, H. & Pötschke, J., 2015, UNITECR 2015. 14th Biennial Worldwide Congress (ed.). Wien, 3 p. 62

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  280. Published

    TENSILE AND COMPRESSIVE CREEP TESTING OF REFRACTORIES AT SERVICE RELATED LOADS

    Sidi Mammar, A., Jin, S., Harmuth, H. & Gruber, D., 2015, UNITERC 2015. 14th Biennial Worldwide Congress (ed.). 1 p. 186

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  281. Published

    Toward CFD Modeling of Slag Entertainment in Gas Stirred Ladles

    Huang, A., Harmuth, H., Doletschek, M., Vollmann, S. & Feng, X., 2015, In: Steel research international. 86, 12, p. 1447-1454 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  282. Published

    Untersuchung der Auflösungskinetik von ZrO2 und Al2O3 in Gießschlacken mit einem konfokalen Laser- Scanning- Mikroskop bei hoher Temperatur

    Schachner, S., 2015

    Research output: Thesis › Master's Thesis

  283. Published

    Untersuchung der Synthesebedingungen von ZrX (X=O,C,N)

    Preisinger, M., 2015

    Research output: Thesis › Master's Thesis

  284. Published

    Wear of magnesia bricks in the permanent lining of a ladle tank degassing unit

    Harmuth, H., Auer, T. & Bertignol, M., 2015, UNITECR 2015. 14th Biennial Worldwide Congress (ed.). Wien, 3 p. 90

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  285. 2014
  286. Published

    Formation of hollow MgO-rich spinel whiskers in low carbon MgO-C refractories with Al additives

    Zhu, T., Li, Y., Sang, S., Jin, S. & Wang, H., Dec 2014, In: Journal of the European Ceramic Society. 34, 16, p. 4425-4432

    Research output: Contribution to journal › Article › Research › peer-review

  287. Published

    Microstructures and mechanical properties of Al2O3-C refractories using nickel-loaded ultrafine microcrystalline graphite and silicon additives

    Wang, H., Li, Y., Sang, S., Jin, S., Xu, Y., Yang, K. & Yu, S., Dec 2014, In: Ceramics International : CI. 40, 10, p. 15783-15793

    Research output: Contribution to journal › Article › Research › peer-review

  288. Published

    Change of mold slag composition during slab casting of steel with high Al content

    Harmuth, H. & Xia, G., 24 Oct 2014, In: Berg- und hüttenmännische Monatshefte : BHM. 159, 11, p. 447-453

    Research output: Contribution to journal › Article › Research

  289. Published

    Effect of nanocarbon sources on microstructure and mechanical properties of MgO-C refractories

    Zhu, T., Li, Y., Sang, S., Jin, S., Li, Y., Zhao, L. & Liang, X., Apr 2014, In: Ceramics International : CI. 40, 3, p. 4333-4340

    Research output: Contribution to journal › Article › Research › peer-review

  290. Published

    A laser irradiation disc test for fracture testing of refractory fine ceramics

    Gruber, D. & Harmuth, H., 2014, In: Journal of the European Ceramic Society. 34, p. 4021-4029

    Research output: Contribution to journal › Article › Research › peer-review

  291. Published

    Change of mold slag composition during slab casting of steel with high Al content

    Harmuth, H. & Xia, G., 2014, 8th European Continuous Casting Conference. p. 952-961

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  292. Published

    Compressive creep testing of refractories at elevated loads-Device, material law and evaluation techniques

    Jin, S., Harmuth, H. & Gruber, D., 2014, In: Journal of the European Ceramic Society. 34, p. 4037-4042

    Research output: Contribution to journal › Article › Research › peer-review

  293. Published

    Creep testing of refractories at service related load levels and application for material simulation

    Jin, S., Harmuth, H. & Gruber, D., 2014, Advances in Science and Technology. p. 221-225

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  294. Published

    Determination of Young's modulus, fracture energy and tensile strength of refractories by inverse estimation of a wedge splitting procedure

    Jin, S., Gruber, D. & Harmuth, H., 2014, In: Engineering Fracture Mechanics. 116, p. 228-236

    Research output: Contribution to journal › Article › Research › peer-review

  295. Published

    Fractographic and Fracture Mechanical Invstigations of Refractories under Different Loading Conditions

    Harmuth, H. & Tschegg, E. K., 2014, In: China's refractories. 23, p. 19-23

    Research output: Contribution to journal › Article › Research › peer-review

  296. Published

    Impact of an increase of Al2O3, TiO2 and ZrO2 on mold slag properties

    Kircher, V., Marschall, I., Kölbl, N. & Harmuth, H., 2014, Proceedings - 8th European Continuous Casting Conference. p. 1050-1059

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  297. Published

    In situ observation of the melting and crystallization behavior of mold powders and slags using high temperature investigation methods

    Kölbl, N., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  298. Published

    Mathematical Modelling of Slag Entrainment in a Gas Stirred Ladle by LES

    Huang, A., Vollmann, S. & Harmuth, H., 2014, 10th India International Refractories Congress - IREFCON14. p. 200-203

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  299. Published

    Melting behavior of mold powders for the continuous casting process of steel

    Marschall, I., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  300. Published

    Optimisation of monolithic lining concepts of channel induction furnace

    Jin, S., Gruber, D., Harmuth, H., Soudier, J., Meunier, P. & lemaistre, H., 2014, In: International journal of cast metals research. 27, 6, p. 336 - 340

    Research output: Contribution to journal › Article › Research › peer-review

  301. Published

    Refractory Corrosion by Dissolution in Slags - Challenges and Trends of Present Fundamental Research

    Harmuth, H. & Vollmann, S., 2014, In: Iron & [and] steel review. 58, 4, p. 157 - 170

    Research output: Contribution to journal › Article › Research › peer-review

  302. Published

    Simulation of refractory fracture as a tool for advanced material testing

    Harmuth, H., Gruber, D. & Jin, S., 2014, Advances in Science and Technology . Vol. 92. p. 232-241

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  303. Published

    Steel ladle linings – key issues regarding thermomechanical behaviour

    Gruber, D. & Harmuth, H., 2014, In: RHI bulletin : the journal of refractory innovations. p. 19-23

    Research output: Contribution to journal › Article › Research › peer-review

  304. Published

    Thermochemical wear of refractory linings associated to gas firing in metallurgical plants

    Rieger, J., Drozd-Rys, M., Weiß, C. & Harmuth, H., 2014, In: Steel research international. 85, p. 527-536

    Research output: Contribution to journal › Article › Research › peer-review

  305. Published

    Thermomechanical Behaviour of Steel Ladle Linings and the Influence of Insulations

    Gruber, D. & Harmuth, H., 2014, In: Steel research international. 85, p. 512-518

    Research output: Contribution to journal › Article › Research › peer-review

  306. 2013
  307. Published

    Microstructure and mechanical properties of multi-walled carbon nanotubes containing Al2O3-C refractories with addition of polycarbosilane

    Luo, M., Li, Y., Jin, S., Sang, S., Zhao, L., Wang, Q. & Li, Y., Jul 2013, In: Ceramics International : CI. 39, 5, p. 4831-4838

    Research output: Contribution to journal › Article › Research › peer-review

  308. Published

    The mechanical fracture characterization of non-linear flexible ceramics using digital image correlation

    Belrhiti, Y., Pop, I. O., Doumalin, P., Dupre, J. C., Auer, T., Gruber, D., Harmuth, H., Huger, M. & Chotard, T., 1 Jan 2013, p. 3587-3595. 9 p.

    Research output: Contribution to conference › Paper › peer-review

  309. Published

    Surface Coating Formation on the Multi-walled Carbon Nanotubes and Its Oxidation Resistance

    Luo Ming, [. V., Li Yawei, [. V., Jin, S., Sang Shaobai, [. V. & Zhao Lei, [. V., Jan 2013, In: Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering. 42, 1, p. 135-139

    Research output: Contribution to journal › Article › Research › peer-review

  310. Published

    A Glance on Turbulence Modelling in Simulating Bubble Stirred Ladle Flow

    Pirker, S., König, B., Puttinger, S., Doletschek, M. & Harmuth, H., 2013, In: Berg- und hüttenmännische Monatshefte : BHM. p. 472-474

    Research output: Contribution to journal › Article › Research › peer-review

  311. Published

    Die Phasenzusammensetzung von Stranggießpulvern und ihre Veränderung mit steigender Temperatur

    Marschall, I., 2013

    Research output: Thesis › Doctoral Thesis

  312. Published

    Investigation of Continuous Casting Slag Films Sampled on Site and Comparison with Laboratory Results

    Marschall, I., Kölbl, N., Harmuth, H. & Xia, G., 2013, In: Journal for manufacturing science & production. 13, p. 103-114

    Research output: Contribution to journal › Article › Research › peer-review

  313. Published

    Main Mechanisms of SEN Slag Band Corrosion as Observed by Post Mortem Investigations

    Harmuth, H., Kircher, V., Kölbl, N., Antczak, M. & Xia, G., 2013, Proceedings of the Unified International Technical Conference on Refractories: UNITECR 2013. p. 000730-000735

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  314. Published

    Marangoni Convection as a Contribution to Refractory Corrosion - CFD Simulation and Analytical Approaches

    Vollmann, S. & Harmuth, H., 2013, Marangoni Convection as a Contribution to Refractory Corrosion - CFD Simulation and Analytical Approaches. p. 000781-000786

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  315. Published

    Metrology of flocculated systems

    Haider, M., 2013, 69 p.

    Research output: Thesis › Master's Thesis

  316. Published

    Optimization of the method for determination of the single periclase crystal size

    Ye, H., 2013

    Research output: Thesis › Master's Thesis

  317. Published

    Simulation of the steel ladle preheating process

    Drozd-Rys, M., Harmuth, H. & Rössler, R., 2013, Simulation of the steel ladle preheating process. p. 764-769

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  318. Published

    Tensile behaviour of magnesia-spinel refractories: Comparison of tensile and wedge splitting tests

    Grasset-Bourdel, R., Alzina, A., Huger, M., Chotard, T., Obenaus-Emler, R., Gruber, D. & Harmuth, H., 2013, In: Journal of the European Ceramic Society. 33, p. 913-923

    Research output: Contribution to journal › Article › Research › peer-review

  319. Published

    Thermochemischer Angriff von Rauchgaskomponenten auf die Feuerfestausmauerung und den Stahlmantel metallurgischer Anlagen

    Rieger, J., Drozd-Rys, M., Weiß, C. & Harmuth, H., 2013, In: Berg- und hüttenmännische Monatshefte : BHM. 158, p. 466-467

    Research output: Contribution to journal › Article › Research › peer-review

  320. Published

    Thermomechanical Behaviour of Steel Ladle Linings and the Influence of Insulations

    Gruber, D. & Harmuth, H., 2013, In: Berg- und hüttenmännische Monatshefte : BHM. 158, p. 470-471

    Research output: Contribution to journal › Article › Research › peer-review

  321. Published

    The Role of Turbulence Modelling in Picturing Gas Stirred Steel Ladle Flow

    Doletschek, M., Pirker, S. & Harmuth, H., 2013, The Role of Turbulence Modelling in Picturing Gas Stirred Steel Ladle Flow. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  322. Published

    Towards Modelling of Slag Entrainment in Gas Stirred Ladles by LES

    Huang, A., Vollmann, S. & Harmuth, H., 2013, Towards Modelling of Slag Entrainment in Gas Stirred Ladles by LES. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  323. 2012
  324. Published

    In situ formation of carbon nanotubes and ceramic whiskers in Al2O3-C refractories with addition of Ni-catalyzed phenolic resin

    Luo, M., Li, Y., Sang, S., Zhao, L., Jin, S. & Li, Y., 15 Dec 2012, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 558, p. 533-542

    Research output: Contribution to journal › Article › Research › peer-review

  325. Published

    Microstructure and mechanical properties of MgO-C refractories containing expanded graphite

    Zhu, T., Li, Y., Jin, S., Sang, S., Wang, Q., Zhao, L., Li, Y. & Li, S., 27 Nov 2012, In: Ceramics International : CI. 39.2013, 4, p. 4529-4537 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  326. Published

    Microstructural Evolution and Oxidation Resistance of Multi-walled Carbon Nanotubes in the Presence of Silicon Powder at High Temperatures

    Luo, M., Li, Y., Jin, S., Sang, S. & Zhao, L., Jul 2012, In: JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY. 28, 7, p. 599-605

    Research output: Contribution to journal › Article › Research › peer-review

  327. Published

    Microstructural evolution of multi-walled carbon nanotubes in the presence of mixture of silicon and silica powders at high temperatures

    Li, Y., Luo, M., Jin, S., Sang, S. & Zhao, L., Jul 2012, In: Ceramics International : CI. 38, 5, p. 4105-4110

    Research output: Contribution to journal › Article › Research › peer-review

  328. Published

    Microstructures and mechanical properties of Al2O3-C refractories with addition of multi-walled carbon nanotubes

    Luo, M., Li, Y., Jin, S., Sang, S., Zhao, L. & Li, Y., 30 Jun 2012, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 548, p. 134-141

    Research output: Contribution to journal › Article › Research › peer-review

  329. Published

    Investigation of Calcium Aluminate based Mold Slag Compositions

    Marschall, I., 21 Feb 2012, E-Proceedings of The 11th International Conference on Molten Slags, Fluxes and Salts.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  330. Published

    CFD Simulation of Mass Transfer Coefficients Relevant for Refractory Wear

    Vollmann, S. & Harmuth, H., 2012, In: Interceram / Refractories manual. p. 19-21

    Research output: Contribution to journal › Article › Research › peer-review

  331. Published

    Characterisation of refractory failure under combined hydrostatic and shear loading at elevated temperatures

    Dahlem, E., 2012, 58 p.

    Research output: Thesis › Doctoral Thesis

  332. Published

    Charakterisierung des Kristallisationsverhaltens einer Gießschlacke und zugehöriger Schlackenfilme

    Dobrowsky, M., 2012, 53 p.

    Research output: Thesis › Diploma Thesis

  333. Published

    Charakterisierung und Gegenüberstellung des Aufschmelz- und Erstarrungsverhaltens zweier Gießpulver

    Kircher, V., 2012, 71 p.

    Research output: Thesis › Diploma Thesis

  334. Published

    Comparison of High Temperature Methods for the Investigation of Melting and Crystallisation Behaviour of Mould Powders

    Kölbl, N., Marschall, I., Harmuth, H., Buchberger, B. & Reiter, J., 2012, FRAY INTERNATIONAL SYMPOSIUM. p. 381-394

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  335. Published

    Corrosion mechanisms of SEN slagband materials

    Harmuth, H., Kölbl, N., Rollinger, B. & Xia, G., 2012, Proceedings of the 6th international symposium on refractories. p. 477-480

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  336. Published

    For an Educational and Industrial Partnership in a Coopetitive World: FIRE

    Rigaud, M., Zhou, N. & Harmuth, H., 2012, Proceedings of the 6th international symposium on refractories. p. 61-63

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  337. Published

    Fractographic and fracture mechanical investigations of refractories under different loading conditions

    Harmuth, H. & Tschegg, E. K., 2012, Proceedings of the 6th international symposium on refractories. p. 485-488

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  338. Published

    Influence of Marangoni convection on refractory wear

    Vollmann, S., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  339. Published

    Influence of thermal damage occurrence at microstructural scale on the thermomechanical behaviour of magnesia-spinel refractories

    Grasset-Bourdel, R., Alzina, A., Huger, M., Chotard, T., Gruber, D. & Harmuth, H., 2012, In: Journal of the European Ceramic Society. 32, p. 989-999

    Research output: Contribution to journal › Article › Research › peer-review

  340. Published

    Investigation of continuous casting slag films sampled on site and comparison with laboratory results

    Marschall, I., Kölbl, N., Harmuth, H. & Xia, G., 2012, Ninth International Conference on Molten Slags, Fluxes and Salts (Molten 12). p. 1-14

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  341. Published

    Investigation of MgALON formation under different conditions and refractory application

    Gschiel, S., Harmuth, H., Lences, Z., Sajgalik, P. & Ye, G., 2012, Proceedings of the 6th international symposium on refractories. p. 489-492

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  342. Published

    Microstructure of solidified mold slag and comparison with laboratory specimens

    Marschall, I., Kölbl, N., Harmuth, H. & Xia, G., 2012, Fray International Symposium. Vol. 2. p. 213-224

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  343. Published

    Preliminary investigations of the production of MgAlON bonded refractories

    Pichlbauer, S., Harmuth, H., Lenčéš, Z. & Šajgalîk, P., 2012, In: Journal of the European Ceramic Society. 32, 9, p. 2013-2018

    Research output: Contribution to journal › Article › Research › peer-review

  344. Published

    Production of MgAlON Bonded Alumina Refractories

    Gschiel, S., Harmuth, H., Lenčéš, Z. & Šajgalîk, P., 2012, In: Interceram / Refractories manual. 1, p. 48-51

    Research output: Contribution to journal › Article › Research › peer-review

  345. Published

    SIMULATION OF MOULDING – INFLUENCING FACTORS AND RESULTS FOR COLLECTOR NOZZLES

    Gruber, D., Harmuth, H. & Michelitsch, A., 2012, Proceedings of International Colloquium on Refractories . p. 112-115

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  346. Published

    Thermomechanical Modelling of a Channel Induction Furnace

    Jin, S., Gruber, D., Harmuth, H., Soudier, J., Meunier, P. & Lemaistre, H., 2012, Proceedings of ALAFAR Congress 2012. p. 1-9

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  347. Published

    Thermo-Mechanical Modelling of Steel Ladle Process Cycles

    Jin, S., Auer, T., Gruber, D., Harmuth, H., Fréchette, M. H. & Li, Y., 2012, In: Interceram / Refractories manual. p. 37-41

    Research output: Contribution to journal › Article › Research › peer-review

  348. Published

    Thermomechanical Steel Ladle Simulation Including a Mohr-Coulomb Plasticity Failure Model

    Jin, S., Gruber, D., Harmuth, H. & Fréchette, M.-H., 2012, In: RHI bulletin : the journal of refractory innovations. 1, p. 39-43

    Research output: Contribution to journal › Article › Research › peer-review

  349. Published

    Untersuchung von Purzementmörtel in Hinblick auf die Anwendung in der Erdölindustrie

    Moser, L., 2012

    Research output: Thesis › Master's Thesis

  350. Published

    Untersuchung von synthetischen Gießschlacken mit reduzierten SiO2-Gehalten

    Thalhammer, T., 2012

    Research output: Thesis › Master's Thesis

  351. Published

    Zum Gedenken an Felix Trojer

    Harmuth, H., 2012, In: Berg- und hüttenmännische Monatshefte : BHM. 157, p. 459-467

    Research output: Contribution to journal › Article › Research › peer-review

  352. 2011
  353. Published

    Oxidation resistance of multi-walled carbon nanotubes coated with polycarbosilane-derived SiCxOy ceramic

    Luo, M., Li, Y., Jin, S., Sang, S. & Zhao, L., Dec 2011, In: Ceramics International : CI. 37, 8, p. 3055-3062

    Research output: Contribution to journal › Article › Research › peer-review

  354. Published

    Classification of thermomechnical impact factors and prediction model for ladle preheating

    Jin, S., Harmuth, H., Gruber, D., Auer, T. & Li, Y., 2011, In: Journal of Wuhan University of Technology. 34, 1, p. 28-31

    Research output: Contribution to journal › Article › Research › peer-review

  355. Published

    Corrosion Mechanisms of Refractory Materials Used in Secondary Metallurgy

    Melcher, F. & Harmuth, H., 2011, In: Refractories worldforum. 3, p. 99-104

    Research output: Contribution to journal › Article › Research › peer-review

  356. Published

    Corrosive wear of refractories in steel ladles - Part I: Fundamentals

    Harmuth, H., Vollmann, S. & Rössler, R., 2011, Refractories-Technology to Sustain the Global Environment. p. 74-74

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  357. Published

    Corrosive wear of refractories in steel ladles - Part II: Influence of Fluid Flow

    Vollmann, S., Harmuth, H. & Kronthaler, A., 2011, Refractories-Technology to Sustain the Global Environment. p. 75-75

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  358. Published

    Evaluation of the Drucker-Prager parameters at elevated temperatures of two refractories

    Dahlem, E., Gruber, D., Auer, T., Harmuth, H., Huger, M. & Chotard, T., 2011, Evaluation of the Drucker-Prager parameters at elevated temperatures of two refractories. p. 1-4

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  359. Published

    Evaluation of the Drucker-Prager Parameters (Cohesion and Friction Angle) at Elevated Temperature for two Refractories

    Dahlem, E., Gruber, D., Auer, T., Harmuth, H., Huger, M. & Chotard, T., 2011, Refractories-Technology to Sustain the Global Environment. p. 93-93

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  360. Published

    Investigation of mold powder crystallization – evaluation and interpretation of measurements from laboratory and production site

    Harmuth, H., Kölbl, N., Marschall, I. & Brandl, W., 2011, Investigation of mold powder crystallization – evaluation and interpretation of measurements from laboratory and production site. p. 1-7

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  361. Published

    Magnesia refractories with non-oxide components

    Pichlbauer, S., 2011

    Research output: Thesis › Doctoral Thesis

  362. Published

    Melt corrosion of refractories in the nonferrous industry and the electric arc furnace: A thermochemical approach

    Reiter, V. & Harmuth, H., 2011, In: Pure and Applied Chemistry. p. 1093-1104

    Research output: Contribution to journal › Article › Research › peer-review

  363. Published

    Micromechanical modelling of magnesia-spinel refractories: from thermal damage to damaging elastic behaviour

    Grasset-Bourdel, R., Alzina, A., Huger, M., Chotard, T., Gruber, D. & Harmuth, H., 2011, Micromechanical modelling of magnesia-spinel refractories: from thermal damage to damaging elastic behaviour. p. 1-4

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  364. Published

    Modélisation micro-mécanique de réfractaires magnésie-spinelle: de l'endommagement dû au différentiel de dilatation pendant l'étape de refroidissement au comportement élastique endommageable en traction

    Grasset-Bourdel, R., Alzina, A., Huger, M., Chotard, T., Gruber, D. & Harmuth, H., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  365. Published

    Naturwissenschaftliche Untersuchungsergebnisse an Gebrauchskeramiken vom mittelbronzezeitlichen Arbeits- und Siedlungsplatz Schlosser/KG Schwarzenbach/OG Trieben

    Presslinger, H., Eibner, C. & Harmuth, H., 2011, In: Berg- und hüttenmännische Monatshefte : BHM. p. 28-33

    Research output: Contribution to journal › Article › Research › peer-review

  366. Published

    New methods for the determination of cohesion and friction angle of refractories at elevated temperatures

    Dahlem, E., Gruber, D., Auer, T., Harmuth, H., Huger, M. & Chotard, T., 2011, In: Interceram. p. 129-134

    Research output: Contribution to journal › Article › Research › peer-review

  367. Published

    Optimisation d'une géométrie d'éprouvette pour l'évaluation à haute température des paramétres de Drucker-Prager sur des matériaux réfractaires

    Dahlem, E., Gruber, D., Auer, T., Harmuth, H., Huger, M. & Chotard, T., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  368. Published

    Optimization of 3D RVE for anisotropy index reduction in modelling thermoelastic properties of two-phase composites using a periodic homogenisation method

    Grasset-Bourdel, R., Alzina, A., Tessier-Doyen, N., Huger, M., Chotard, T., Schmitt, N., Gruber, D. & Harmuth, H., 2011, In: Computational materials science. 50, p. 3136-3144

    Research output: Contribution to journal › Article › Research › peer-review

  369. Published

    Permeabilität von feuerfesten Baustoffen während des Pressvorganges

    Atzenhofer, C., 2011

    Research output: Thesis › Master's Thesis

  370. Published

    Simulation of the Thermomechanical Behaviour of Magnesia-Spinel Refractories

    Grasset-Bourdel, R., Alzina, A., Huger, M., Chotard, T., Gruber, D. & Harmuth, H., 2011, Refractories-Technology to Sustain the Global Environment. p. 111-111

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  371. Published

    Single Hot Thermocouple Technique for the Characterization of the Crystallization Behavior of Transparent or Translucent Liquids

    Kölbl, N., Marschall, I. & Harmuth, H., 2011, In: Journal of materials science. 46, p. 6248-6254

    Research output: Contribution to journal › Article › Research › peer-review

  372. Published

    Structure/property relations of magnesia-spinel refractories: experimental determination and simulation

    Grasset-Bourdel, R., 2011

    Research output: Thesis › Doctoral Thesis

  373. Published

    The fracture resistance of refractories

    Bradt, R. C. & Harmuth, H., 2011, In: Refractories worldforum. 3, p. 129-135

    Research output: Contribution to journal › Article › Research › peer-review

  374. Published

    Thermochemical and Fluid-Dynamical Investigations of Refractory Wear by Ladle Slags

    Harmuth, H. & Vollmann, S., 2011, In: Interceram. p. 88-90

    Research output: Contribution to journal › Article › Research › peer-review

  375. Published

    Thermo-mechanical Modeling of a Complete Steel Ladle Process

    Jin, S., Auer, T., Gruber, D., Harmuth, H., Fréchette, M. H. & Li, Y., 2011, Refractories-Technology to Sustain the Global Environment. p. 10-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  376. Published

    Thermo-mechanical simulation of a steel ladle process cycle with special emphasis on the preheating process

    Auer, T., Gruber, D., Harmuth, H., Jin, S. & Kronthaler, A., 2011, Refractories for Industrials. p. 39-41

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  377. Published

    Untersuchungen an Magnesiaspinellsteinen mittels der Impulse Excitation Technique bei Raumtemperatur und bei hohen Temperaturen

    Mairitsch, E., 2011

    Research output: Thesis › Master's Thesis

  378. 2010
  379. Published

    Microstructures and Properties of Carbon Refractories for Blast Furnaces with SiO2 and Al Additions

    Li, Y., Chen, X., Sang, S., Li, Y., Jin, S., Zhao, L. & Ge, S., Aug 2010, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 41A, 8, p. 2085-2092

    Research output: Contribution to journal › Article › Research › peer-review

  380. Published

    Properties and microstructures of blast furnace carbon refractories with Al additions

    Chen, X., Li, Y., Sang, S., Zhao, L., Jin, S. & Li, S., Aug 2010, In: Ironmaking and steelmaking. 37, 6, p. 398-406

    Research output: Contribution to journal › Article › Research › peer-review

  381. Published

    Effect of Carbon Aggregates on the Properties of Carbon Refractories for a Blast Furnace

    Chen, X., Li, Y., Li, Y., Sang, S., Zhao, L., Li, S., Jin, S. & Ge, S., Apr 2010, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 41, 2, p. 420-429

    Research output: Contribution to journal › Article › Research › peer-review

  382. Published

    Assessment of Alkali Salt Infiltration into Refractories in Cement Rotary Kilns by Means of Process Simulation

    Emler, R., 2010, In: RHI bulletin : the journal of refractory innovations. 1, p. 21-24

    Research output: Contribution to journal › Article › Research › peer-review

  383. Published

    Characterisation of the fracture path in ‘flexible’ refractories

    Harmuth, H., 2010, Refractories: recent developments in materials, production and use : selected papers from the 12th International Ceramics Congress, part of CIMTEC 2010-12th International Ceramics Congress and 5th Forum on New Materials, Montecatini Terme, Italy, June 6 - 11, 2010 ; part I including Symposium CL . p. 30-36 (Advances in science and technology; vol. 70).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  384. Published

    Comparison of the slag rim formation of two different mould powders

    Marschall, I., Kölbl, N. & Harmuth, H., 2010, Proceedings of the International Conference on Materials Science & Technology (MS&T'10) . p. 1591-1600

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  385. Published

    Computational fluid dynamics simulations of mass transfer coefficients in gas purged steel ladles.

    Vollmann, S. & Harmuth, H., 2010, Computational fluid dynamics simulations of mass transfer coefficients in gas purged steel ladles.. p. 441-451

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  386. Published

    Corrosive mass transfer in steel ladles.

    Vollmann, S. & Harmuth, H., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  387. Published

    Der Verschleiß von feuerfesten Schieberplatten durch Korrosion

    Müller, M. A., 2010

    Research output: Thesis › Doctoral Thesis

  388. Published

    Development of a Microstructural Methodology to Establish Structur/Property Relations of Refractories and First Results for Magnesia Spinel Materials

    Grasset-Bourdel, R., Gruber, D., Harmuth, H., Huger, M., Emler, R. & Chotard, T., 2010, Proceedings of the 49th Conference of Metallurgists; Advances in Refractories V. p. 425-440

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  389. Published

    Die Single Hot Thermocouple Technique zur Charakterisierung des Kristallisationsverhaltens transparenter Schmelzen

    Kölbl, N., Marschall, I. & Harmuth, H., 2010, Stranggießen. p. 81-86

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  390. Published

    Direkte Untersuchung des Aufschmelz- und Erstarrungsverhaltens von Gießpulvern und Gießschlacken unter Anwendung von Hochtemperaturverfahren

    Kölbl, N., 2010

    Research output: Thesis › Doctoral Thesis

  391. Published

    Einfluss der Strömungsmechanik auf den Verschleiß feuerfester Baustoffe

    Vollmann, S., 2010

    Research output: Thesis › Doctoral Thesis

  392. Published

    "Flexibility" of refractories - fracture mechanical and microscopic investigations

    Harmuth, H., 2010, Proceedings of the International Scientific Conference Refractories, Furnaces and Thermal Insulations. p. 36-41

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  393. Published

    Investigation of Refractory Brittleness by Fracture Mechanical and Fractographic Methods

    Harmuth, H. & Bradt, R. C., 2010, In: Interceram / Refractories manual. p. 6-10

    Research output: Contribution to journal › Article › Research › peer-review

  394. Published

    Investigation of Refractory Corrosion of a Gas-stirred Steel Ladle by Simulation.

    Vollmann, S. & Harmuth, H., 2010, 12th International Ceramics Congress Part I. p. 199-204

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  395. Published

    Investigation of Refractory Corrosion of a Gas-stirred Steel Ladle by Simulation.

    Vollmann, S. & Harmuth, H., 2010, Refractories: recent developments in materials, production and use : selected papers from the 12th International Ceramics Congress, part of CIMTEC 2010-12th International Ceramics Congress and 5th Forum on New Materials, Montecatini Terme, Italy, June 6 - 11, 2010 ; part I including Symposium CL . p. 199-204 (Advances in science and technology; vol. 70).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  396. Published

    Investigation of the rotary slagging test by computational fluid dynamics calculations

    Vollmann, S. & Harmuth, H., 2010, In: Journal of the Technical Association of Refractories. 30, p. 10-18

    Research output: Contribution to journal › Article › Research › peer-review

  397. Published

    Melt corrosion of refractories in the non-ferrous industry and the electric arc furnace: A thermochemical approach

    Reiter, V. & Harmuth, H., 2010, 14th International Symposium on Solubility Phenomena ISSP 2010. p. 34-34

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  398. Published

    Microstructural and thermochemical analysis of spinel castables used in steel ladles

    Melcher, F. & Harmuth, H., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  399. Published

    Modélisation des propriétés d'élasticité de matériaux réfractaires modéles par homogénéisation périodique

    Grasset-Bourdel, R., Gruber, D., Harmuth, H., Schmitt, N., Alzina, A., Huger, M. & Chotard, T., 2010, Modélisation des propriétés d'élasticité de matériaux réfractaires modéles par homogénéisation périodique. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  400. Published

    New methode to Determine the Cohesion and the Friction Angle of Refractory Materials ar Room Temperature and at Elevated Temperature

    Dahlem, E., Gruber, D., Auer, T., Harmuth, H., Huger, M. & Chotard, T., 2010, Proceedings of the 49th Conference of Metallurgists; Advances in Refractories V. p. 497-504

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  401. Published

    Optimisation d’une géométrie d’éprouvette pour essai sous sollicitation combinée compression-cisaillement de matériaux réfractaires

    Dahlem, E., Gruber, D., Auer, T., Harmuth, H., Huger, M. & Chotard, T., 2010, Materiaux 2010. p. 97-99

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  402. Published

    Predicition of volatile recirculation in cement clinker burning systems by means of process simulation

    Emler, R. & Harmuth, H., 2010, 14th International Symposium on Solubility Phenomena ISSP 2010. p. 35-35

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  403. Published

    Propriétés thermomécaniques de réfractaires magnésie/spinelle modèles

    Grasset-Bourdel, R., Emler, R., Gruber, D., Harmuth, H., Huger, M. & Chotard, T., 2010, Propriétés thermomécaniques de réfractaires magnésie/spinelle modèles. p. 100-102

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  404. Published

    Relevance of numerical simulation for refractory corrosion in steel industry

    Harmuth, H., Vollmann, S., Melcher, F., Gruber, D. & Majcenovic, C., 2010, Advances in Refractories V, 5th International Symposium, The Michel Rigaud Symposium. p. 453-463

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  405. Published

    Simulation of moulding of refractory bricks

    Gruber, D. & Harmuth, H., 2010, Refractories: recent developments in materials, production and use : selected papers from the 12th International Ceramics Congress, part of CIMTEC 2010-12th International Ceramics Congress and 5th Forum on New Materials, Montecatini Terme, Italy, June 6 - 11, 2010 ; part I including Symposium CL . p. 167-172 (Advances in science and technology; vol. 70).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  406. Published

    Simulation of moulding of Refractory bricks

    Gruber, D. & Harmuth, H., 2010, CIMTEC, 12th International Ceramics Congress Part I. p. 167-172

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  407. Published

    Thermomechanical Failure Modes of Steel Ladles

    Gruber, D., Auer, T. & Harmuth, H., 2010, Proceedings of the 49th Conference of Metallurgists; Advances in Refractories V,. p. 465-476

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  408. Published

    Thermo-mechanical simulation of two alternative steel ladle linings

    Auer, T., Gruber, D. & Harmuth, H., 2010, Refractories for Metallurgy. p. 94-97

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  409. Published

    Untersuchung der Sprödigkeit feuerfester Baustoffe mit bruchmechanischen und fraktographischen Methoden

    Harmuth, H. & Bradt, R. C., 2010, In: Keramische Zeitschrift. 62, p. 264-269

    Research output: Contribution to journal › Article › Research › peer-review

  410. Published

    Untersuchungen zur Bindung keramischer Schleifkörper

    Akcay, C., 2010, 47 p.

    Research output: Thesis › Master's Thesis

  411. 2009
  412. Published

    Behavior of magnesium and silicon in the formation of MgO/AlN composite

    Li, Y., Jin, S., Liu, G., Zhang, W., Ao, J. & Li, Z., Aug 2009, In: Journal of materials science. 44, 15, p. 4155-4161

    Research output: Contribution to journal › Article › Research › peer-review

  413. Published

    Microstructural evolution in MgOp/AlN composites

    Li, Y. W., Jin, S. L., Li, Y. B., Zhao, L. & Li, Z. Y., Aug 2009, In: Ceramics International : CI. 35, 6, p. 2241-2247

    Research output: Contribution to journal › Article › Research › peer-review

  414. Published

    Effect of Temperature on the Properties and Microstructures of Carbon Refractories for Blast Furnace

    Chen, X., Li, Y., Li, Y., Jin, S., Zhao, L. & Ge, S., Jul 2009, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 40A, 7, p. 1675-1683

    Research output: Contribution to journal › Article › Research › peer-review

  415. Published

    An Austrian experience with identification and assessment of alkali-aggregate reaction in motorways

    Fischböck, E. K. & Harmuth, H., 2009, Proceedings of the international conference on concrete repair, rehabilitation and retrofitting 2008. p. 441-447

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  416. Published

    Application of attenuation of resonant frequencies for characterisation of alkali-silica reaction

    Fischböck, E., Harmuth, H. & Eberl, S., 2009, Concrete Durability and Service Life Planning -ConcreteLife'09. p. 196-203

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  417. Published

    Basic understanding of wear of refractories in metallurgical vessels

    Gruber, D. & Harmuth, H., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  418. Published

    Coke breeze particle surface reactions and the NOx formation mechanism during the sintering process

    Drozd-Rys, M., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  419. Published

    CORRELATION BETWEEN ELASTIC PROPERTIES OBTAINED BY ULTRASONIC AND RESONANCE TECHNIQUES WITH STRESS-STRAIN LAWS OBTAINED BY TENSILE TESTS

    Renaud, G.-B., Dahlem, E. & Manhart, C., 2009, Refractories in a Shifting Globalized World. p. 43-44

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  420. Published

    Corrosion mechanisms of magnesia chromite bricks in contact with a secondary steelmaking slag

    Melcher, F., Harmuth, H., Pichlbauer, S., Neuböck, R. & Rössler, R., 2009, 11th Biennal Worldwide Congress on Refractories. p. 26-CD

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  421. Published

    Does combination of different materials influence thermomechanical lining behaviour? A case study for a torpedo ladle

    Auer, T., Gruber, D., Harmuth, H. & Glaser, M., 2009, Refractories in a Shifting Globalized World. p. 23-23

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  422. Published

    Fractographic investigation of refractories

    Harmuth, H. & Manhart, C., 2009, UNITECR 2009 Summary Booklet. p. 26-26

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  423. Published

    Fractographic investigations of ordinary ceramic refractory materials with reduced brittleness

    Harmuth, H. & Manhart, C., 2009, Fractography of Advanced Ceramics III. p. 209-215

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  424. Published

    Identifikation und Beurteilung der Alkali-Kieselsäurereaktion unter Einbeziehung österreichischer Schadensfälle

    Fischböck, E. K., 2009, 99 p.

    Research output: Thesis › Doctoral Thesis

  425. Published

    Influence of burning conditions on beta-SiAlON bond of Al2O3 refractories

    Pichlbauer, S., Harmuth, H., Lenčéš, Z., Šajgalîk, P. & Petrušková, V., 2009, UNITECR 2009 - Unified International Technical Conference on Refractories - 11th Biennial Worldwide Congress. p. 15-dig. CD

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  426. Published

    Investigation of slag corrosion by CFD calculations

    Vollmann, S. & Harmuth, H., 2009, Investigation of slag corrosion by CFD calculations. ASMET, p. digital-0

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  427. Published

    Investigation of slag corrosion by fluid dynamics calculations

    Vollmann, S., Harmuth, H. & Gruber, D., 2009, UNITECR ´09 - Unified International Technical Conference on Refractories. p. 25-25

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  428. Published

    Investigation of the influence of fluid flow on slag corrosion of refractories by CFD calculations

    Vollmann, S., Harmuth, H. & Buchberger, B., 2009, Proceedings 52th International Colloquium on Refractories, Aachen, Germany. p. 102-104

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  429. Published

    Investigation of the melting behaviour of mould powders

    Kölbl, N., Marschall, I. & Harmuth, H., 2009, Molten 2009, Proceedings of the Viii International Conference on Molten Slags, Fluxes and Salts. p. 1031-1040

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  430. Published

    Korrosionsverhalten feuerfester Baustoffe in Schlacken unter dem Einfluß elektrischer Felder

    Breyner, R., 2009

    Research output: Thesis › Doctoral Thesis

  431. Published

    Preparation of β-sialon bonded Al2O3-refractories in different atmospheres

    Pichlbauer, S., Harmuth, H., Lenčéš, Z., Šajgalîk, P. & Petrušková, V., 2009, ECERS - 11th International Conference and Exhibition of the European Ceramic Society. p. 179-CD

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  432. Published

    RESONANT FREQUENCY AND DAMPING ANALYSIS OF REFRACTORIES WITH AND WITHOUT REDUCED BRITTLENESS

    Manhart, C. & Harmuth, H., 2009, Refractories in a Shifting Globalized World. p. 14-15

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  433. Published

    RESONANT FREQUENCY AND DAMPING ANALYSIS TECHNIQUE AS A TOOL TO INVESTIGATE ELASTIC MODULI BY THE MICROSTRUCTURE ALTERATION OF REFRACTORIES AT ELEVATED TEMPERATURE

    Dahlem, E., Manhart, C. & Grasset-Bourdel, R., 2009, Refractories in a Shifting Globalized World. p. 54-55

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  434. Published

    Simulation of refractories resonance frequency

    Gruber, D., Auer, T. & Harmuth, H., 2009, UNITECR'09, 11th Biannial Worldwide Congress. p. 27-dig.-CD

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  435. Published

    Uniaxial and biaxial fracture behaviour of refractory materials

    Tschegg, E., Fendt, K. T., Manhart, C. & Harmuth, H., 2009, In: Engineering Fracture Mechanics. 76, p. 2249-2259

    Research output: Contribution to journal › Article › Research › peer-review

  436. Published

    Untersuchung des Einflusses von verschiedenen Pfannenschlacken auf den Verschleiß der Feuerfestauskleidung von Stahlgießpfannen und RH-Anlage

    Melcher, F., 2009

    Research output: Thesis › Doctoral Thesis

  437. Published

    Untersuchungen zur Anwendung der Dämpfung von Resonanzfrequenzen zur Bewertung der Alkali-Kieselsäurereaktion

    Fischböck, E. & Harmuth, H., 2009, 17. Internationale Baustofftagung IBAUSIL 23.-25.9.2009, Weimar. p. 2-0277-2-0281

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  438. Published

    Versuche zur Infiltration feindisperser Feststoffe in grobkeramischen Baustoffen.

    Wölfel, S., 2009

    Research output: Thesis › Diploma Thesis

  439. 2008
  440. Published

    Carbothermic reduction synthesis of Ti(C, N) powder in the presence of molten salt

    Chen, X., Li, Y., Li, Y., Zhu, J., Jin, S., Zhao, L., Lei, Z. & Hong, X., Jul 2008, In: Ceramics International : CI. 34, 5, p. 1253-1259

    Research output: Contribution to journal › Article › Research › peer-review

  441. Published

    Template formation of aluminum-magnesium hydroxide nano-branches on linear poly(ethylene imine)

    Xiang, T., Zhao, L., Li, Y., Lei, Z., Jin, S., Li, S., Li, Y. & Liang, Y., 15 Apr 2008, In: Materials letters. 62, 10-11, p. 1627-1629

    Research output: Contribution to journal › Article › Research › peer-review

  442. Published

    Gas-Liquid-Solid Transportation Mechanism during Directed Melt Nitridation of Al Melt

    Jin, S., Li Yawei, Y., Liu , G., Li , Y., Zhao , L. & Li , Z., Jan 2008, In: Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering. 37, p. 228-231

    Research output: Contribution to journal › Article › Research › peer-review

  443. Published

    Magnesium vapor diffusion behavior over Al molten surface in directed metal nitridation process

    Jin, S., Li , Y., Liu, G., Li , Y., Zhao, L. & Li , Z., Jan 2008, In: Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering. 37, 1, p. 58-61

    Research output: Contribution to journal › Article › Research › peer-review

  444. Published

    Characterisation of the melting behaviour of mould powders

    Marschall, I., Kölbl, N. & Harmuth, H., 2008, 6th European Conference on Continuous Casting 2008. p. 17-17

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  445. Published

    Durability of Brick Lined Steel Ladles from a Mechanical point of View

    Gruber, D. & Harmuth, H., 2008, In: Steel research international. p. 913-917

    Research output: Contribution to journal › Article › Research › peer-review

  446. Published

    Hot stage microscopy for in situ observations of the melting and crystallisation behaviour of mould powders

    Kölbl, N. & Harmuth, H., 2008, Scanmet III 3rd International Conference on Process Development in Iron and Steelmaking. p. 73-81

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  447. Published

    Identifikation und Beurteilung der Alkali-Gesteinskörnungs-Reaktion

    Harmuth, H. & Fischböck, E. K., 2008, In: FSV aktuell : Mitteilungen der Österreichischen Forschungsgemeinschaft Straße und Verkehr (FSV). März 08, p. 3-4

    Research output: Contribution to journal › Article › Research › peer-review

  448. Published

    Influence of an irreversible expansion of a teeming ladle lining on its thermo-mechanical behaviour

    Gruber, D., Auer, T., Harmuth, H. & Buchebner, G., 2008, Refractories in Metallurgy, 51st International Colloquium on Refractories. p. 73-75

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  449. Published

    Investigation of Slag Rim Growth in the Continuous Casting Process

    Marschall, I. & Harmuth, H., 2008, Scanmet III 3rd International Conference on Process Development in Iron and Steelmaking Volume 2. p. 419-425

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  450. Published

    Mechanisms to reduce cracking in interior plasters attached to cement bonded permanent shuttering panels

    Kirschner, A. & Harmuth, H., 2008, In: Construction & building materials (Construction and building materials). 22, p. 99-105

    Research output: Contribution to journal › Article › Research › peer-review

  451. Published

    Messung und Charakterisierung der Produktgleichmäßigkeit von Portlandzement

    Schnedl, G., 2008

    Research output: Thesis › Doctoral Thesis

  452. Published

    Microstructal and thermochemical analysis of spinel castables used in steel ladles

    Melcher, F., Harmuth, H. & Reiter, V., 2008, In: Interceram. p. 257-260 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  453. Published

    Microstructure and phase composition of AIN/Al composite fabricated by directed melt nitridation

    Jin, S., Li, Y., Liu, J., Li, Y., Zhao, L., Liu, X., Ni, Y. & Li, Z., 2008, HIGH-PERFORMANCE CERAMICS V, PTS 1 AND 2. Vol. 368-372. p. 977-979 (KEY ENGINEERING MATERIALS).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  454. Published

    Thermochemische Berechnungen und experimentelle Untersuchungen zur Lösungskorrosion feuerfester Baustoffe

    Reiter, V., 2008

    Research output: Thesis › Doctoral Thesis

  455. 2007
  456. Published

    Modified directed melt nitridation of pure aluminum block using magnesium as an external dopant

    Jin, S., Li, Y., Li, Y., Zhao, L., Liu, X., Liu, J. & Li, Z., Sept 2007, In: Journal of materials science. 42, 17, p. 7311-7315

    Research output: Contribution to journal › Article › Research › peer-review

  457. Published

    Anwendung eines Inversenverfahrens zur Auswertung eines Keilspalttests für die bruchmechanische Charakterisierung von Feuerfestbaustoffen

    Lackner, S., 2007

    Research output: Thesis › Master's Thesis

  458. Published

    Charakterisierung der Produktgleichmäßigkeit am Beispiel der Frühfestigkeit von Zement

    Schnedl, G. & Harmuth, H., 2007, In: Cement, lime, gypsum = Zement, Kalk, Gips : ZKG international. 12, p. 96-103

    Research output: Contribution to journal › Article › Research › peer-review

  459. Published

    Development of a device and method for fractographic investigations of refractories

    Manhart, C. & Harmuth, H., 2007, Unified International technical Conference on Refractories UNITECR'07. p. 494-497

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  460. Published

    Die Verschleißfutterzustellung des "Franzisci-Hochofens" in Möderbrugg (Steiermark)

    Presslinger, H., Harmuth, H. & Neuper, W., 2007, In: Res montanarum : Zeitschrift des Montanhistorischen Vereins für Österreich. p. 60-63

    Research output: Contribution to journal › Article › Research › peer-review

  461. Published

    Endbericht zum Bridgeprojekt " Verschleiß von Feuerfestmaterialien durch Stahlwerksschlacken"

    Melcher, F. & Harmuth, H., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  462. Published

    Finite Element investigation of the crack formation in the slag line of a teeming ladle

    Gruber, D., Auer, T., Harmuth, H. & Rotsch, J., 2007, Unified International technical Conference on Refractories UNITECR'07. p. 182-185

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  463. Published

    Fracture Mechanical Characterisation of Refractories and Application for Assessment and Simulation of the Thermal Shock Behaviour

    Harmuth, H., Manhart, C., Auer, T. & Gruber, D., 2007, In: Ceramic forum international (CFI). p. E80-E86

    Research output: Contribution to journal › Article › Research › peer-review

  464. Published

    Fraktografische Untersuchungen an basischen feuerfesten Baustoffen unterschiedlicher Sprödigkeit

    Manhart, C., 2007

    Research output: Thesis › Doctoral Thesis

  465. Published

    Identifikation von treibenden Zuschlagkomponenten bei zwei zementgebundenen Probekörpern mit besonderen Zuschlägen

    Harmuth, H., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  466. Published

    Improvement of digital imaging techniques as a basis for optical fractographic measurements

    Manhart, C., 2007, Optical 3-D Measurement Techniques. ETH, p. 207-212

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  467. Published

    Investigation of Refractory/Slag Equilibria in Steel Ladles

    Melcher, F., Reiter, V. & Harmuth, H., 2007, Calphad XXXVI. p. 72-73

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  468. Published

    Investigations of corrosionof different alumina spinel castables by ladle slags

    Melcher, F., Reiter, V., Harmuth, H., Rössler, R., Ecker, M. & Molinari, T., 2007, Unitecr '07, Unified International Technical Conference on Refractories. p. 230-233

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  469. Published

    Microstructural assessment of alumina porcellain specimens

    Harmuth, H., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  470. Published

    Microstructural Investigation of four porcellain specimens

    Harmuth, H., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  471. Published

    Numerical analysis of the thermomechanical behaviour of an EAF roof delta piece

    Auer, T., Gruber, D. & Harmuth, H., 2007, Unified International technical Conference on Refractories UNITECR'07. p. 174-177

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  472. Published

    Optimierung der Mischzeit von Trockenmörteln in Pflugscharmischern

    Plank, V., 2007, 85 p.

    Research output: Thesis › Diploma Thesis

  473. Published

    Optimierung eines optischen stereoskopischen Verfahrens zur Anwendung an grobkeramischen Baustoffen

    Unterreiter, G., 2007

    Research output: Thesis › Diploma Thesis

  474. Published

    Potential des Einsatzes nichtoxidischer Refraktärkomponenten in keramisch gebundenen basischen feuerfesten Baustoffen

    Dohr, K., 2007

    Research output: Thesis › Master's Thesis

  475. Published

    Prediction of the chemical loading of refractories in a cement rotary kiln by means of process simulation

    Emler, R., Harmuth, H. & Nievoll, J., 2007, UNITECR '07 - Unified International Technical Conference on Refractories. p. 577-580

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  476. Published

    Prediction of the chemical loading of refractories in cement rotary kilns by means of process simulation

    Emler, R. & Harmuth, H., 2007, 9th Annual GTT-Technologies Workshop. p. 8-9

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  477. Published

    Quarterly Report – Simulation activities GHI-RRC

    Gerer, S., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  478. Published

    Thermal modelling of a 300t torpedo ladle with Finite Element Methods

    Auer, T., Gruber, D., Harmuth, H. & Zirkl, R., 2007, Thermal modelling of a 300t torpedo ladle with Finite Element Methods. p. 159-163

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  479. Published

    Thermochemical characterisation of fayalite slags of the non-ferrous industry and refractory/slag equilibria

    Reiter, V., Melcher, F. & Harmuth, H., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  480. Published

    Thermochemical Modeling of EAF Slags and Refractory/Slag equilibria

    Reiter, V., Melcher, F., Harmuth, H. & Netzer, W., 2007, Unitecr '07, Unified International Technical Conference on Refractories. p. 170-173

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  481. Published

    Thermo-mechanical FE-Simulation of a teeming ladle slag line

    Gruber, D., Auer, T., Harmuth, H. & Rotsch, J., 2007, STEELSIM 2007. p. 291-294

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  482. Published

    Untersuchung der Rissbildung an 4 zementgebundenen Probekörpern mit besonderen Zuschlägen

    Harmuth, H., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  483. Published

    Untersuchung der Rissbildung an zementgebundenen Probekörpern

    Harmuth, H., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  484. Published

    Untersuchung eines Ansatzringes aus dem Zementrotierofen eines südamerikanischen Zementherstellers

    Harmuth, H. & Kölbl, N., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  485. Published

    Untersuchungen zur Erhöhung der Oxidationsbeständigkeit von Kohlenstoffträgern in Feuerfestprodukten

    Pichlbauer, S., 2007

    Research output: Thesis › Master's Thesis

  486. Published

    Untersuchungen zur Verminderung der Rissbildungsneigung des modularen Fertigbausystems "Heraklith H-TH"

    Harmuth, H. & Fischböck, E. K., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  487. Published

    Untersuchung synthetischer Zuschläge in Hinblick auf potenziell treibende Bestandteile bei der Verwendung als Zuschlag in zementgebundenen Baustoffen

    Harmuth, H., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  488. Published

    Untersuchung von Bohrkernen aus einer Ortbetonleitwand von der A1-Westautobahn nähe Haag Richtungsfahrbahn Wien

    Fischböck, E. K. & Harmuth, H., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  489. Published

    Untersuchung von Grundstoffen für die Mineralfaserproduktion in Hinblick auf ihr Schmelzverhalten

    Harmuth, H., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  490. 2006
  491. Published

    Formation mechanism of 21R AlN-polytypoids in aluminothermic reduction and nitridation process

    Li, Y. W., Zhou, G. H., Jin, S. L. & Li, N., Aug 2006, In: Journal of materials science. 41, 15, p. 4795-4798

    Research output: Contribution to journal › Article › Research › peer-review

  492. Published

    Synthesis of Mg-alpha-sialon from the mixture of silicon, aluminum and magnesia powders in a flowing nitrogen atmosphere

    Li, Y., Sang, S., Jin, S., Yang, C. & Li, N., Aug 2006, In: Journal of materials science. 41, 18, p. 5815-5819

    Research output: Contribution to journal › Article › Research › peer-review

  493. Published

    Support vector regression applied to materials optimization of sialon ceramics

    Liu, X., Lu, W., Jin, S., Li, Y. & Chen, N., 26 May 2006, In: Chemometrics and Intelligent Laboratory Systems. 82, 1-2, p. 8-14

    Research output: Contribution to journal › Article › Research › peer-review

  494. Published

    Fem based thermo-mechanical investigations of RH-snorkels

    Gruber, D., Auer, T., Harmuth, H. & Sormann, A., 30 Mar 2006, UNITECR '05 - Proceedings of the Unified International Technical Conference on Refractories: 9th Biennial Worldwide Congress on Refractories. Smith, J. D. (ed.). p. 970-974 5 p. (UNITECR '05 - Proceedings of the Unified International Technical Conference on Refractories: 9th Biennial Worldwide Congress on Refractories).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  495. Published

    Numerical investigations of mechanical behaviour of refractories

    Auer, T., Gruber, D., Harmuth, H. & Triessnig, A., 30 Mar 2006, UNITECR '05 - Proceedings of the Unified International Technical Conference on Refractories: 9th Biennial Worldwide Congress on Refractories. Smith, J. D. (ed.). p. 985-989 5 p. (UNITECR '05 - Proceedings of the Unified International Technical Conference on Refractories: 9th Biennial Worldwide Congress on Refractories).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  496. Published

    Thermal and thermo-mechanical modeling of a 300t torpedo ladle

    Gruber, D., Auer, T., Harmuth, H. & Zirkl, R., 30 Mar 2006, UNITECR '05 - Proceedings of the Unified International Technical Conference on Refractories: 9th Biennial Worldwide Congress on Refractories. Smith, J. D. (ed.). p. 896-899 4 p. (UNITECR '05 - Proceedings of the Unified International Technical Conference on Refractories: 9th Biennial Worldwide Congress on Refractories).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  497. Published

    Anwendung eines stereoskopischen Verfahrens zur fraktografischen Charakterisierung von grobkeramischen Baustoffen

    Manhart, C. & Harmuth, H., 2006, In: Practical metallography = Praktische Metallographie.

    Research output: Contribution to journal › Article › Research › peer-review

  498. Published

    Application of fluorine containing raw materials in the cement industry

    Harmuth, H., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  499. Published

    A stereoscopic method for fractographic investigations of ordinary ceramics

    Manhart, C., 2006, 16th European Conference of Fracture, Failure Analysis of Nano and Engineering Materials and Structrures.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  500. Published

    Bericht zum Lokalaugenschein Georgsmarienhütte 11.5.2006

    Gruber, D., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  501. Published

    Beurteilung von drei Feuerfeststeinen in Hinblick auf den Einsatz der Sorten im Maerzofen

    Harmuth, H., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  502. Published

    Contributions to Refractory Fracture Mechanical and Fractographic Investigations

    Auer, T., Manhart, C. & Harmuth, H., 2006, In: RHI bulletin : the journal of refractory innovations. 1, p. 38-42 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  503. Published

    Ermittlung der Viskosität bei 1400 °C einer Glasphasen- und Schlackenprobe (Untersuchung der Problematik der Messbarkeit)

    Harmuth, H., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  504. Published

    Herstellung von Sintermullit mit der stöchiometrischen Zusammensetzung A3S2 unter Verwendung ausgewählter Rohstoffe und Charakterisierung der hergestellten Produkte

    Michelitsch, A., 2006

    Research output: Thesis › Diploma Thesis

  505. Published

    Hilfsstoffe für den Strangguss – Charakterisierung von 17 Stranggießpulvern

    Kirschner, A., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  506. Published

    Hilfsstoffe für den Strangguss – Ermittlung der Viskosität

    Kirschner, A., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  507. Published

    Hilfsstoffe für den Strangguss – Methoden zur chemischen Analyse von Stranggießpulvern

    Kirschner, A., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  508. Published

    Hilfsstoffe für den Strangguss - Vergleichende Untersuchungen mit dem Hochtemperaturviskosimeter

    Kirschner, A., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  509. Published

    Identifikation und Beurteilung der Alkali-Zuschlag-Reaktion

    Harmuth, H. & Fischböck, E. K., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  510. Published

    Identifikation und Beurteilung der Alkali-Zuschlag-Reaktion.

    Harmuth, H. & Fischböck, E. K., 2006, In: Straßenforschung. p. 5-42

    Research output: Contribution to journal › Article › Research › peer-review

  511. Published

    Identifikation und Beurteilung der Alkali-Zuschlag-Reaktion. Endbericht Mai 2006

    Fischböck, E. K. & Harmuth, H., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  512. Published

    Identifikation und Beurteilung der Alkali-Zuschlag-Reaktion. Projektbericht April 2006

    Fischböck, E. K. & Harmuth, H., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  513. Published

    Identifikation und Beurteilung der Alkali-Zuschlag-Reaktion. Projektbericht Februar 2006

    Fischböck, E. K. & Harmuth, H., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  514. Published

    Numerical failure analysis for the refractory lining of a tundish

    Auer, T., Gruber, D. & Harmuth, H., 2006, 49th International Colloquium on Refractories. p. 194-196

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  515. Published

    Numerical simulation of a fracture test for brittle disordered materials

    Auer, T. & Harmuth, H., 2006, Fracture of Nano and Engeneering Materials and Structures. p. 591-592

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  516. Published

    Quarterly Report Q2– Simulation activities GHI-RRC

    Gruber, D., Auer, T., Gerer, S. & Harmuth, H., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  517. Published

    Quarterly Report Q3– Simulation activities GHI-RRC

    Gruber, D., Auer, T., Gerer, S. & Harmuth, H., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  518. Published

    Simulation des thermomechanischen Verhaltens von ausgewählten feuerfesten Zustellungen und Bauteilen

    Gruber, D., 2006, 106 p.

    Research output: Thesis › Doctoral Thesis

  519. Published

    Tätigkeitsbericht des Christian-Doppler-Labors für eigenschaftsoptimierte Baustoffe für die Laufzeit vom 01.04.1999 bis 31.03.2006

    Kirschner, A., Harmuth, H., Manhart, C., Gruber, D., Auer, T. & Marschall, I., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  520. Published

    Untersuchung des Temperaturhaushalts eines Konverters der VA-SD

    Gruber, D., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

Previous 1 2 Next
View graph of relations

Contact information

Peter-Tunner-Straße 5, 8700 Leoben
  • Main phone number: +43 3842 402 3201