Chair of Polymer Processing (350)

Organisational unit: Chair

501 - 946 out of 946Page size: 500

Research output

  1. 2014
  2. Published

    RECYCLINGSVERFAHREN VON BOHRLOCHFESTKÖRPERN IN POLYMEREN

    Holzer, C. (Inventor) & Hofstätter, H. (Inventor), 23 Jul 2014, IPC No. C08K 11/ 00 A I, Patent No. EP2756028, Priority date 14 Sept 2012, Priority No. WO2012EP68165

    Research output: Patent

  3. Published

    УТИЛИЗАЦИЯ ЧАСТИЦ БУРОВОГО ШЛАМА В ПОЛИМЕРАХ

    Хофштеттер, Х. (Inventor) & Holzer, C. (Inventor), 30 Jun 2014, IPC No. C08K 3/ 34 A I, Patent No. EA201490564, Priority date 14 Sept 2012, Priority No. WO2012EP68165

    Research output: Patent

  4. Published

    Interface conditions of two-shot molded parts

    Kisslinger, T., Bruckmoser, K., Lucyshyn, T., Langecker, G., Resch, K. & Holzer, C., 15 May 2014, Proceedings of PPS-29: The 29th International Conference of the Polymer Processing Society - Conference Papers. p. 170-174 (AIP conference proceedings; vol. 1593).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  5. Published

    Analysis, Implementation and Investigation of a Wireless In-Mold Sensor for Injection Molding

    Müller, F., 2014, 207 p.

    Research output: Thesis › Doctoral Thesis

  6. Published

    Analysis of Double Percolated Networks of Polyamide Chains/Carbon Nanotubes under Shearing Flows

    Gooneie, A., Nazockdast, H. & Shahsavan, F., 2014, Proceedings of 11th International Seminar on Polymer Science and Technology (ISPST2014). p. 1-2

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  7. Published

    Analysis of Double Percolated Networks of Polyamide Chains/Carbon Nanotubes under Shearing Flows

    Gooneie, A., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  8. Published

    Bruchbeständigkeit einer extrusionsblasgeformten Kunststoffflasche in ihrem Produktlebenszyklus

    Raimann, P., 2014, 81 p.

    Research output: Thesis › Master's Thesis

  9. Published

    Calculation Tool for the Estimation of Injection Mold Deformation Based on FEM-Simulations

    Lucyshyn, T., Kisslinger, T., Langecker, G. & Holzer, C., 2014, Proceedings of PPS2014. p. 1-3

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. Published

    Charakterisierung und Einfluss der rheologischen Eigenschaften auf die Schaummorphologie physikalisch geschäumter Polyethylenmaterialformulierungen

    Uray, A., 2014, 84 p.

    Research output: Thesis › Master's Thesis

  11. Published

    Charakterisierung von Kunststoffen in Hinblick auf inline Qualitätskontrolle in Extrusionsprozessen mittels Nahinfrarotspektroskopie

    Witschnigg, A., 2014, 178 p.

    Research output: Thesis › Doctoral Thesis

  12. Published

    Compounding of polymer nanocomposites

    Laske, S., 2014

    Research output: Thesis › Habilitation thesis › peer-review

  13. Published

    Effects of the polymeric niche on neural stem cell characteristics during primary culturing

    Katschnig, M., Haubenwallner, S., Fasching, U., Patz, S., Trattnig, C., Andraschek, N., Grünbacher, G., Absenger, M., Laske, S., Holzer, C., Balika, W., Bauer, G. & Schäfer, U., 2014, In: Journal of materials science / Materials in medicine.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Evaluation of the Demoldability of Coated Micro Structures in the Injection Molding Process

    Struklec, T., Burgsteiner, M., Lucyshyn, T., Balika, W., Moderegger, S. & Holzer, C., 2014, Proceedings of PPS 30.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  15. Published

    Experimental Confirmation of Diffusion Process in Multi-Component Injection Molding

    Kisslinger, T., Bruckmoser, K., Lucyshyn, T., Langecker, G., Holzer, C. & Resch, K., 2014, Proceedings of PPS 30. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  16. Published

    Influence of cellulose fiber on the foaming behavior of a polypropylene copolymer

    Geissler, B., Laske, S., Uray, A., Holzer, C. & Langecker, G., 2014, Influence of cellulose fiber on the foaming behavior of a polypropylene copolymer. p. 1-7

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    Influence of different blowing and nucleating agents on the degassing pressure and the foam morphology of physically foamed polypropylene

    Geissler, B., Walluch, M., Laske, S., Holzer, C. & Langecker, G., 2014,

    Blowing Agents & Foaming Processes 2014

    .     p. 1-2

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  18. Published

    INFLUENCE OF MINERAL FILLERS ON THE FLAME RETARDANCY OF EXPANDABLE GRAPHITE / POLYPROPYLENE MATERIALS

    Mattausch, H., Laske, S., Hohenwarter, D. & Holzer, C., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  19. Published

    INFLUENCE OF MINERAL FILLERS ON THE FLAME RETARDANCY OF EXPANDABLE GRAPHITE / POLYPROPYLENE MATERIALS

    Mattausch, H., Laske, S., Hohenwarter, D. & Holzer, C., 2014, Proceedings of Antec 2014. p. 115-120

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  20. Published

    Influence of the Flow Channel Geometry on the Degassing Pressure in foam Extrusion

    Geissler, B., Schuschnigg, S., Laske, S., Macher, J., Holzer, C. & Langecker, G., 2014, Proceedings of the Technical Conference Exhibition. p. 2496-2499

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  21. Published

    Influence of the process parameters on the replication of microstructured freeform surfaces

    Burgsteiner, M., Müller, F., Lucyshyn, T., Kukla, C. & Holzer, C., 2014, AIP Conference Proceedings: PROCEEDINGS OF PPS-29: The 29th International Conference of the Polymer Processing Society - Conference Papers. Nuremberg, Germany, Vol. 1593. p. 183-188

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. Published

    Investigation of the Influence of Different Coatings on the Filling Behavior and Replication Quality of Microstructures in Injection Molding

    Burgsteiner, M., Müller, F., Lucyshyn, T., Kukla, C., Holzer, C., Gruber, D. P., Macher, J. & Pacher, G., 2014, Proceedings of PPS 30. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  23. Published

    Multiscale Simulation of Polymers

    Gooneie, A., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  24. Published

    NIR – spectroscopy: a sophisticated tool for process and quality control

    Witschnigg, A., Laske, S. & Holzer, C., 2014, NIR – spectroscopy: a sophisticated tool for process and quality control. p. 1-7

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  25. Published

    Numerical Simulation of Temperature Changes in Rubber Compounds Flowing Through Conical Dies: an Engineering Approach

    Gooneie, A., Perko, L., Schuschnigg, S. & Holzer, C., 2014, Proceedings of 11th International Seminar on Polymer Science and Technology (ISPST2014). p. 1-2

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  26. Published

    Numerical Simulation of Temperature Changes in Rubber Compounds Flowing Through Conical Dies: an Engineering Approach

    Gooneie, A., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  27. Published

    Numerical Simulations of the Flow of Wood Polypropylene Composites with Wall Slipping in a Profile Die: The Significance of Material Data

    Gooneie, A., Schuschnigg, S., Duretek, I. & Holzer, C., 2014, Proceedings of 30th International Conference of the Polymer Processing Society (PPS-30). p. 401-405

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  28. Published

    Optimierung der Wärmeleitfähigkeit von kompakten Polyethylen in Hinblick auf geschäumte Dämmstoffe

    Kerschbaumer, R., 2014

    Research output: Thesis › Master's Thesis

  29. Published

    PP-Polymer Nanocomposites with Improved Mechanical Properties Using Elongational Flow Devices at the Injection Molding Compounder

    Battisti, M. G. & Friesenbichler, W., 2014, In: AIP Conference Proceedings. 1593, p. 195-198

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Properties and applications of nanoclay composites

    Mattausch, H., 2014, Polymer Nanoclay Composites.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  31. Published

    Prozessführungen und Materialformulierungen für physikalisch geschäumte Polymerprodukte

    Geißler, B., 2014, 192 p.

    Research output: Thesis › Doctoral Thesis

  32. Published

    Spritzgießtechnologie

    Lucyshyn, T., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  33. Published

    Steigerung der thermischen Beständigkeit von Polymeren auf Basis nachwachsender Rohstoffe

    Ziegler, W., 2014, 110 p.

    Research output: Thesis › Master's Thesis

  34. Published

    Strategies to improve the mechanical properties of high-density polylactic acid foams

    Geissler, B., Feuchter, M., Laske, S., Fasching, M., Holzer, C. & Langecker, G., 2014, In: Journal of Cellular Plastics [Elektronische Ressource]. p. 1-21

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Study of the Effects of Electric Parameters on the polyacrylamide NanoFilm Thickness Produced via Electro-Polymerization

    Shahsavan, F., Eslami, H. & Gooneie, A., 2014, Proceedings of 11th International Seminar on Polymer Science and Technology (ISPST2014). p. 1-2

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    Tailor-made high density pla foam sheets – strategies to improve the mechanical properties

    Geissler, B., Feuchter, M., Laske, S., Walluch, M., Holzer, C. & Langecker, G., 2014,

    Blowing Agents & Foaming Processes 2014

    .     p. 1-2

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. Published

    Tailor-made high density PLA foam sheets – strategies to improve the mechanical properties

    Geißler, B., Feuchter, M., Laske, S., Walluch, M., Holzer, C. & Langecker, G., 2014, In: Cellular polymers. 33, p. 233-242

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Tailor-Made High Density PLA Foam Sheets - Strategies to Improve the Mechanical Properties

    Geissler, B., Feuchter, M., Laske, S., Walluch, M., Holzer, C. & Langecker, G. R., 2014, In: Cellular polymers. 33, 5, p. 249-257

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    The Effect of Mineral Fillers on the Rheological, Mechanical and Thermal Properties of Halogen-Free Flame-Retardant Polypropylene/Expandable Graphite Compounds

    Mattausch, H., Laske, S., Hohenwarter, D. & Holzer, C., 2014, Proceedings of PPS 30.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. Published

    The effect of pre -shear history on the rheological behavior of Wood Plastic Composites

    Duretek, I. & Holzer, C., 2014, Proceedings of the 30th Annual Meeting of the Polymer Processing Society. p. 300-300

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  41. Published

    The influence of a hydrolysis-inhibiting additive on the degradation and biodegradation of PLA and its nanocomposites

    Stloukal, P., Kalendova, A., Mattausch, H., Laske, S., Holzer, C. & Koutny, M., 2014, In: Polymer Testing.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Tribological Investigations of Polyamide Nanocomposites

    Witschnigg, A., Laske, S., Duretek, I., Holzer, C., Chitu, L. & Bodner, S., 2014, Proceedings of the 30th Annual Meeting of the Polymer Processing Society. p. 756-756

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  43. Published

    Untersuchungen zur Rückgewinnung ausgewählter technischer Thermoplaste aus komplexen Abfallströmen

    Hoeggerl, G., 2014

    Research output: Thesis › Master's Thesis (University Course)

  44. Published

    UWG für Mikrogranulat

    Schuschnigg, S., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  45. Published

    UWG für Mikrogranulat

    Schuschnigg, S., 2014, WerWasWo.Forschung@MUL. p. 210-210

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  46. Published

    Verwendung von Bohrloch-Cuttings als Füllstoff in Kunststoffen

    Holzer, C., Witschnigg, A., Laske, S., Kowalcyzk, D., Hofstätter, H. & Schulze, K., 2014, Tagungsband zur 12. DepoTech-Konferenz 2014. p. 431-434

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    Voraussetzungen für die hocheffiziente Kunststoffverarbeitung mittels Spritzgusses

    Lucyshyn, T., Janko, M., Struklec, T. & Holzer, C., 2014, 23. Leobener Kunststoff-Kolloquium: Hocheffiziente Verbundwerkstoffe. p. 87-98

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  48. Published

    WerWasWo.Forschung@MUL 2014

    Schuschnigg, S. (Editor), 2014, Eigenverlag. (WerWasWo; vol. 5)

    Research output: Book/Report › Book › Transfer

  49. Published

    Wireless in-mold melt front detection for injection molding: A long-term evaluation

    Müller, F., Kukla, C., Lucyshyn, T., Harker, M., Rath, G. & Holzer, C., 2014, In: Journal of Applied Polymer Science. 131, p. 5628-5638

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Wireless Melt Front Detection for Injection Moulding

    Müller, F., Kukla, C., Lucyshyn, T., Burgsteiner, M. & Holzer, C., 2014, ICIT & MPT 2014 Conference Proceedings . p. 153-159

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  51. 2013
  52. Published

    EXPLOSIVE CARTRIDGE

    Moser, P. (Inventor), Bauer, F. F. (Inventor), Friesenbichler, W. (Inventor), Fertschej, A. (Inventor) & Schatzer, R. (Inventor), 27 Nov 2013, IPC No. F42D C I, Patent No. ZA201206754, Priority date 25 Mar 2011, Priority No. WO2011EP54635

    Research output: Patent

  53. Published

    Acoustic sensing in plastics moulding process

    Rath, G. (Inventor), Kukla, C. (Inventor), Lucyshyn, T. (Inventor) & Müller, F. (Inventor), 24 Jul 2013, IPC No. B29C 45/ 76 A I, Patent No. GB2498586, Priority date 23 Jan 2012, Priority No. GB20120001067

    Research output: Patent

  54. Published

    RECYCLING OF BOREHOLE SOLIDS IN POLYMERS

    Holzer, C. (Inventor) & Hofstätter, H. (Inventor), 21 Mar 2013, IPC No. C08K 3/ 34 A I, Patent No. CA2848810, Priority date 14 Sept 2012, Priority No. WO2012EP68165

    Research output: Patent

  55. Published

    RECYCLING OF BOREHOLE SOLIDS IN POLYMERS

    Holzer, C. (Inventor) & Hofstätter, H. (Inventor), 21 Mar 2013, IPC No. C08K 3/ 34 A I, Patent No. WO2013037978, Priority date 16 Sept 2011, Priority No. EP20110181725

    Research output: Patent

  56. Published

    SPRENGPATRONE

    Moser, P. (Inventor), Bauer, F. (Inventor), Friesenbichler, W. (Inventor), Fertschej, A. (Inventor) & Schatzer, R. (Inventor), 30 Jan 2013, IPC No. F42D 1/ 10 A I, Patent No. EP2550502, Priority date 25 Mar 2011, Priority No. WO2011EP54635

    Research output: Patent

  57. Published

    Application and Development of Simulation Software in Polymer Processing

    Lucyshyn, T., Müller, F., Schuschnigg, S., Holzer, C., Perko, L., Fasching, M. & Friesenbichler, W., 2013, In: Berg- und hüttenmännische Monatshefte : BHM. 158, p. 200-205

    Research output: Contribution to journal › Article › Research › peer-review

  58. Published

    Bohrschlamm als Füllstoff in thermoplastischen Kunststoffen

    Begusch, M., 2013

    Research output: Thesis › Master's Thesis

  59. Published

    Capabilities of a Demolding Force Measurement Tool for Injection Molding

    Struklec, T., Holzer, C., Lucyshyn, T., Balika, W. & Moderegger, S., 2013, Proceedings of the Asia-Australasia Conference of PPS 2013. p. 051-051

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  60. Published

    Charakterisierung der Entstehung des „Twist & Curl“ Effektes von Verbundmaterialformaten für die Getränkekartonherstellung

    Mungenast, D., 2013, 94 p.

    Research output: Thesis › Master's Thesis

  61. Published

    Charakterisierung und Weiterentwicklung von faserverstärkten Hochleistungsthermoplasten als Ventilplattenwerkstoffe

    Koppelmüller, G., 2013

    Research output: Thesis › Master's Thesis

  62. Published

    Compact Recreational Rebreather With Innovative Gas Sensing Concept and Low Work of Breathing Design

    Sieber, A., Schuster, A., Reif, S., Kessler, M., Lucyshyn, T., Buzzacott, P. & Enoksson, P., 2013, In: Marine Technology Society journal. 47, 6, p. 27-41

    Research output: Contribution to journal › Article › Research › peer-review

  63. Published

    Correlation between Rheotens Measurements and Reinforcement of Polymer Nanocomposites in the Injection Molding Compounder

    Battisti, M., Duretek, I., Friesenbichler, W., Guttmann, P. & Pinter, G., 2013, 1st International Conference on Rheology and Modelling of Materials - Book of Abstracts. p. 39-39

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  64. Published

    Deformation Analysis of an Automotive Part by Injection Molding Simulation: Influence of Material Data and Mold Modeling on Prediction Quality

    Luger, H.-J., Berger, G., Müller, F., Friesenbichler, W., Beytollahi, I. & Filz, P., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  65. Published

    Deformation Analysis of an Automotive Part by Injection Molding Simulation: Influence of Material Data and Mold Modelling on Prediction Quality

    Luger, H.-J., Berger, G., Müller, F., Friesenbichler, W., Beytollahi, I. & Filz, P., 2013, 29th International Conference of the Polymer Processing Society. p. 59-59

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  66. Published

    Design of a Demolding Force Measurement Tool for Injection Molding

    Struklec, T., Burgsteiner, M., Lucyshyn, T., Balika, W., Moderegger, S. & Holzer, C., 2013, Proceedings of the Polymer Processing Society 29th Annual Meeting ~ PPS-29. p. xxx-xxx

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  67. Published

    DESIGN OF A DEMOLDING FORCE MEASUREMENT TOOL FOR INJECTION MOLDING

    Struklec, T., Burgsteiner, M., Lucyshyn, T., Balika, W., Moderegger, S. & Holzer, C., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  68. Published

    Dielectric ResidenceTime Measurements on Single Screw Extruders

    Schuschnigg, S., Reinberger, W., Holzer, C. & Fertschej, A., 2013, PPS-29 Polymer Processing Scociety. p. 31-31

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  69. Published

    Entformungskraftmessung an mikrostrukturierten Bauteilen

    Struklec, T., Burgsteiner, M., Lucyshyn, T., Balika, W., Pöschl, C. & Holzer, C., 2013, 22. Leobener Kunststoff-Kolloquium: Oberlfächen und Grenzflächen in der Polymertechnologie. p. 90-100

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  70. Published

    Entwicklung und Konstruktion eines neuartigen Mundstücks für ein Kreislauftauchgerät

    Kessler, M., 2013

    Research output: Thesis › Master's Thesis

  71. Published

    Geometrical modification of weld lines for high performance plastics in injection molding

    Kaufmann, A., 2013, 112 p.

    Research output: Thesis › Master's Thesis

  72. Published

    Grenzflächenphänomene im Mehrkomponenten-Spritzguss

    Kisslinger, T., Bruckmoser, K., Lucyshyn, T., Langecker, G. & Holzer, C., 2013, 22. Leobener Kunststoff-Kolloquium. p. 58-74

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  73. Published

    High-End Spritzgießsimulation

    Lucyshyn, T., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  74. Published

    Hör auf dein Werkzeug

    Müller, F., Kukla, C., Lucyshyn, T. & Holzer, C., 2013, In: Kunststoffe. p. 31-33

    Research output: Contribution to journal › Article › Research › peer-review

  75. Published

    Hör auf dein Werkzeug - Schallsensorik für das Spritzgießen

    Müller, F., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  76. Published

    Influence of Chain Extender on the Foaming Behavior and on the Mechanical Properteis of Physically Foamed PLA

    Mostafa, H., Geißler, B., Uray, A., Laske, S., Holzer, C. & Langecker, G., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  77. Published

    Influence of chain extender on the foaming behaviour and the mechanical properties of physically foamed PLA

    Geißler, B., Mostafa, H., Uray, A., Laske, S., Holzer, C. & Langecker, G., 2013, The 29th International Conference of The Polymer Processing Society (PPS-29). p. 120-125

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  78. Published

    Influence of different fillers on the processing behaviour and mechanical properties of physically foamed polyethylene

    Geißler, B., Laske, S., Holzer, C. & Langecker, G., 2013, The 29th International Conference of The Polymer Processing Society (PPS-29). p. 129-134

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  79. Published

    Influence of particle size and particle shape on mechanical, rheological and thermal properties of polyproyplene / aluminum composites

    Holzer, C., 2013, Proceedings of the 29th International Conference of the Polymer Processing Society. p. xxx-xxx

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  80. Published

    Influence of the shear rate and the nucleating agent on the degassing pressure in foam extrusion

    Geißler, B., Macher, J., Uray, A., Laske, S., Holzer, C. & Langecker, G., 2013,

    11th International Conference on Foam Materials & Technology

    .     p. 17-21

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  81. Published

    Influencing Parameters on the Master Casting Process used for the Replication of Microstructures on Curved Surfaces via Injection Molding

    Burgsteiner, M., 2013, Books of Abstracts of the 12th International Conference on NNT 2013. p. 184-184

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  82. Published

    Influencing Parameters on the Master Casting Process used for the Replication of Microstructures on Curved Surfaces via Injection Molding

    Burgsteiner, M., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  83. Published

    INTERACTION BETWEEN INJECTION MOLDING PARAMETERS, FIBER ORIENTATION AND WARPAGE IN CARBON FIBER REINFORCED PPS VALVE PLATES

    Lucyshyn, T., Janko, M., Schmid, M. & Holzer, C., 2013, Proceedings of the Polymer Processing Society 29th Annual Meeting ~ PPS-29. p. 1-4

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  84. Published

    INTERACTION BETWEEN INJECTION MOLDING PARAMETERS, FIBER ORIENTATION AND WARPAGE IN CARBON FIBER REINFORCED PPS VALVE PLATES

    Lucyshyn, T., Janko, M., Schmid, M. & Holzer, C., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  85. Published

    INTERFACE CONDITIONS OF TWO-SHOT MOLDED PARTS

    Kisslinger, T., Bruckmoser, K., Lucyshyn, T., Langecker, G. & Holzer, C., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  86. Published

    Investigation of the influence of processing conditions on the thermal, rheological and mechanical behavior of polypropylene nanocomposites

    Mattausch, H., Laske, S., Duretek, I., Kreith, J., Maier, G. & Holzer, C., 2013, In: Polymer engineering and science. 53, p. 1001-1010

    Research output: Contribution to journal › Article › Research › peer-review

  87. Published

    Measurement of the yield stress of a stainless steel feedstock

    Duretek, I., Kukla, C., Langecker, G. & Holzer, C., 2013, Euro PM2013 Proceedings Volume 1. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  88. Published

    Measurement of the yield stress of a stainless steel feedstock

    Duretek, I., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  89. Published

    Measuring the residence time distribution in a twin screw extruder with the use of NIR-spectroscopy

    Laske, S., Witschnigg, A., Selvasankar, R. K. & Holzer, C., 2013, In: Journal of Applied Polymer Science. 131, p. 39919-39924

    Research output: Contribution to journal › Article › Research › peer-review

  90. Published

    New Developments in Polymer Composite Research

    Laske, S. (Co-editor) & Witschnigg, A. (Co-editor), 2013, New York, USA.

    Research output: Book/Report › Book › Research

  91. Published

    Performance Evaluation of Purely Mechanical Wireless In-Mould Sensor for Injection Moulding

    Müller, F., Kukla, C., Lucyshyn, T. & Holzer, C., 2013, World Academy of Science Engineering and Technology. p. 55-60

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  92. Published

    Polymere mikro- und nanoskalige Compounds mit verbesserten tribologischen Eigenschaften

    Walluch, M., 2013

    Research output: Thesis › Master's Thesis

  93. Published

    Presentation of a Novel Sensor Based on Acoustic Emission in Injection Molding

    Müller, F., Rath, G., Lucyshyn, T., Kukla, C., Burgsteiner, M. & Holzer, C., 2013, In: Journal of Applied Polymer Science. 127, p. 4744-4749

    Research output: Contribution to journal › Article › Research › peer-review

  94. Published

    Reibwerte und Entformungskräfte im konventionellen Spritzguss. Vorhersage durch Grenzflächenspannung?

    Berger, G., Friesenbichler, W., Teichert, C., Langecker, G. & Lugger, M., 2013, 22. Leobener Kunststoff-Kolloquium: Oberlfächen und Grenzflächen in der Polymertechnologie. p. 75-89

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  95. Published

    Resonant Acoustic Sensor System for the Wireless Monitoring of Injection Moulding

    Müller, F., O'Leary, P., Rath, G., Kukla, C., Harker, M., Lucyshyn, T. & Holzer, C., 2013, Proceedings of the 2nd International Conference on Sensor Networks. p. 153-161

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  96. Published

    Rheological properties of wood polymer composites and their role in extrusion

    Duretek, I., Schuschnigg, S., Gooneie, A., Langecker, G. & Holzer, C., 2013, The 1st International Conference on Rheology and Modeling of Materials, Book of Abstracts. p. 36-36

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  97. Published

    Strategies to improve the mechanical properties of high density pla foam

    Geißler, B., Anna, U., Laske, S., Holzer, C. & Langecker, G., 2013,

    Tutorials & abstracts Biofoams 2013

    .     p. 234^-237

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  98. Published

    Untersuchung der Haftfestigkeit von Kunststoffmaterialpaarungen im Mehrkomponentenspritzguss

    Kisslinger, T., 2013

    Research output: Thesis › Doctoral Thesis

  99. Published

    Untersuchungen zum Fließverhalten von Metall-, Keramik- und Holz-Kunststoffverbunden

    Duretek, I., 2013, 243 p.

    Research output: Thesis › Doctoral Thesis

  100. Published

    Variotherm Injection Molding Process with BFMold Technology and Electric Heating: Simulation and Experimental Validation

    Pichler, A., Rus, P., Kukla, C., Berger, G., Müller, F., Lucyshyn, T., Pacher, G. & Friesenbichler, W., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  101. Published

    Wavelet Analysis for Structure-Borne Sound Generating Sensor in Injection Molding

    Rath, G., Müller, F., Kukla, C. & Lu, Z., 2013, 2013 International Conference on Applied Electronics. p. 233-236

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  102. 2012
  103. Published

    The effect of extensive mechanical recycling on the properties of low density polyethylene

    Jin, H., Gonzalez-Gutierrez, J., Oblak, P., Zupancic, B. & Emri, I., Nov 2012, In: Polymer Degradation and Stability. 97, 11, p. 2262-2272

    Research output: Contribution to journal › Article › Research › peer-review

  104. Published

    IMPORTANCE OF VISCOELASTIC CHARACTERISTICS IN DETERMINING FUNCTIONALITY OF TIME-DEPENDENT MATERIALS

    Emri, I., Zupancic, B., Gergesova, M., Saprunov, I., Gonzalez-Gutierrez, J. & Bek, M., Oct 2012, In: DYNA-COLOMBIA. 79, 175, p. 97-104

    Research output: Contribution to journal › Article › Research › peer-review

  105. Published

    Explosive cartridge

    Moser, P. (Inventor), Bauer, F. (Inventor), Friesenbichler, W. (Inventor), Fertschej, A. (Inventor) & Schatzer, R. (Inventor), 27 Sept 2012, IPC No. F42D 1/ 10 A I, Patent No. AU2011231560, Priority date 25 Mar 2011, Priority No. WO2011EP54635

    Research output: Patent

  106. Published

    Powder Injection Molding of Metal and Ceramic Parts

    Gonzalez-Gutierrez, J., Stringari, G. & Emri, I., 23 Mar 2012, Some Critical Issues for Injection Molding. Wang, J. (ed.). 1 ed. Rijeka, Croatia, p. 65 - 88 23 p. 3

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  107. Published

    Rheology and mechanical properties of fats

    Gonzalez-Gutierrez, J. & Scanlon, M. G., 23 Feb 2012, Structure-function analysis of edible fats. Marangoni, A. (ed.). 1 ed. Urbana, Illinois, USA, p. 127-172 45 p. 5

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  108. Published

    METHOD FOR PRODUCING A SYNTHETIC PAPER AND PAPER PRODUCED THEREWITH

    Laske, S. (Inventor), Langecker, G. R. (Inventor) & Friesenbichler, W. (Inventor), 15 Jan 2012, IPC No. B29C55/12, Patent No. AT507721 (B1)

    Research output: Patent

  109. Published

    Verfahren zur Herstellung eines synthetischen Papiers und damit hergestelltes Papier

    Laske, S. (Inventor), Friesenbichler, W. (Inventor), Langecker, G. (Inventor), Achatz, P. (Inventor) & Burkhalter, R. (Inventor), 15 Jan 2012, Patent No. A 28/2009

    Research output: Patent

  110. Published

    A Physical Model for a Quality Control Concept in Injection Molding

    Lucyshyn, T., Kipperer, M., Kukla, C., Langecker, G. & Holzer, C., 2012, In: Journal of Applied Polymer Science. 124, p. 4926-4934

    Research output: Contribution to journal › Article › Research › peer-review

  111. Published

    Arbeitsgruppe Extrusion Lehrstuhl für Kunststoffverarbeitung

    Schuschnigg, S., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  112. Published

    Characterization of polymer surfaces to optimize cell behavior

    Holzer, C., Katschnig, M., Laske, S., Kracalik, M., Balika, W., Schäfer, U. & Andraschek, N., 2012, In: Journal of tissue engineering and regenerative medicine. 6, p. 361-362

    Research output: Contribution to journal › Article › Research › peer-review

  113. Published

    Characterization of polymer surfaces to optimize cell behavior

    Holzer, C., Katschnig, M., Laske, S., Kracalik, M., Balika, W., Schäfer, U. & Andraschek, N., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  114. Published

    Demolding Force Measurements of Coated Micro-Structured Surfaces in a Hot Embossing Process

    Struklec, T., Burgsteiner, M., Lucyshyn, T., Balika, W., Pöschl, C. & Holzer, C., 2012, Proceedings of the Polymer Processing Society 28th Annual Meeting ~ PPS-28. p. XXX-XXX

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  115. Published

    Determination of the Transition Temperature at Different Cooling Rates and Its Influence on Prediction of Shrinkage and Warpage in Injection Molding Simulation

    Lucyshyn, T., Knapp, G., Kipperer, M. & Holzer, C., 2012, In: Journal of Applied Polymer Science. 123, p. 1162-1168

    Research output: Contribution to journal › Article › Research › peer-review

  116. Published

    Determining the ageing of polypropylene nanocomposites using rheological measurements

    Laske, S., Witschnigg, A., Mattausch, H., Kracalik, M., Pinter, G., Feuchter, M., Maier, G. & Holzer, C., 2012, In: Applied rheology. 22, 2, p. 24590-24614

    Research output: Contribution to journal › Article › Research › peer-review

  117. Published

    Effect of the mixture composition on shear and extensional rheology of recycled PET and ABS nanocomposites

    Kracalik, M., Laske, S., Witschnigg, A. & Holzer, C., 2012, In: Macromolecular Symposia. p. 33-40

    Research output: Contribution to journal › Article › Research › peer-review

  118. Published

    Effect of type and degree of layered silicates on mechanical properties and burning behavior of recycled ABS

    Piontek, M., Witschnigg, A., Laske, S., Kracalik, M. & Holzer, C., 2012,

    Program & Abstracts of PPS Americas Conference 2012

    .     p. 235-236

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  119. Published

    Einfluss von Chlorella Algen auf die Materialeigenschaften von Polyolefinen

    Piontek, M., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  120. Published

    Einfluss von Material und Prozessparameter auf Verstippung von Bag-in-Box-Folien

    Doler, M., 2012

    Research output: Thesis › Master's Thesis

  121. Published

    Einfluss von Schichtsilkaten auf die Wärmeleitfähigkeit von polymeren Nanocomposites

    Laske, S., Witschnigg, A., Duretek, I., Mattausch, H., Tscharnutter, D. & Holzer, C., 2012, Mit Compoundieren zum Erfolg. p. 97-104

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  122. Published

    Enhancement of PLA Property Profile using Nanoscaled Organoclays

    Holzer, C., Kracalik, M., Hirschenauer, M., Washüttl, M. & Laske, S., 2012,

    Progam Book & Compilation of Abstracts of International Conference on Nanotechnology 2012 (ICONT )

    .     p. 152-152

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  123. Published

    EXINMOLD: a Design Support Software for Injection Mold Makers

    Holzer, C., Kisslinger, T., Hirner, M., Lucyshyn, T. & Langecker, G., 2012,

    Program & Abstracts of PPS 2011

    .     p. 134-134

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  124. Published

    Halogenfreie flammgeschützte Polyolefine

    Mattausch, H., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  125. Published

    Influence of induced shear work on the properties of polyolefine nanocomposite pipes

    Witschnigg, A., Laske, S., Kracalik, M. & Holzer, C., 2012, In: Polymer engineering and science. Volume 52, p. 1155-1160

    Research output: Contribution to journal › Article › Research › peer-review

  126. Published

    Influence of masterbatches on the bond strength of two-shot molded parts

    Kisslinger, T., Lucyshyn, T., Langecker, G. & Holzer, C., 2012, Proceedings of the Polymer Processing Society 28th Annual Meeting ~ PPS-28. p. xxx-xxx

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  127. Published

    Influence of the degree of exfoliation on the thermal conductivity of polypropylene nanocomposites

    Laske, S., Duretek, I., Witschnigg, A., Mattausch, H., Tscharnuter, D. & Holzer, C., 2012, In: Polymer engineering and science. 52, p. 1479-1753

    Research output: Contribution to journal › Article › Research › peer-review

  128. Published

    In-line Qualitätskontrolle und Charakterisierung mittels NIR

    Witschnigg, A., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  129. Published

    Investigation of sorbitol/polyhedral oligomeric silsesquioxane /carbon nanotubes / polypropylene nanocomposite spun fibers

    Mattausch, H. & Jana, S., 2012, The 28th International Conference of The Polymer Processing Society (PPS-28) Proceedings. p. 332-336

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  130. Published

    Keynote: The influence of nanostructures on cellular processes during differentiation of neuronal stem cells

    Schäfer, U., Haubenwallner, S., Katschnig, M., Holzer, C., Laske, S., Balika, W., Andraschek, N., Fasching, U. & Patz, S., 2012, Journal of Tissue Engineering and Regenerative Medicine. p. 83-83

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  131. Published

    Kontinuierliche Schaumextrusion

    Laske, S., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  132. Published

    Kunststoffverarbeitung

    Holzer, C., 2012, Programm. p. 49-81

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  133. Published

    Nah-Infrarot Spektroskopie - Möglichkeiten der Qualitätskontrolle

    Witschnigg, A., Laske, S. & Holzer, C., 2012, Mit Compoundieren zum Erfolg. p. 69-76

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  134. Published

    Neuer Ansatz für stoffliches Recycling von Altreifengummi

    Witschnigg, A., Laske, S. & Holzer, C., 2012, DepoTech 2012 Tagungsband. p. 353-358

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  135. Published

    NIR-spectroscopy for measuring the residence time distribution in continuous processes

    Witschnigg, A., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  136. Published

    Optimierung von PLA/TPS Blends

    Hirschenauer, M., 2012

    Research output: Thesis › Master's Thesis

  137. Published

    Rheologie von Kunststoffschmelzen

    Duretek, I. & Schuschnigg, S., 2012, VDI Wissensforum, Extrusionswerkzeuge für Rohre und Profile. p. 1-32

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  138. Published

    Rheology of wood plastics composites using by-pass-extrusion-rheometer on the twin screw extruder

    Duretek, I., Selvasankar, R. K., Langecker, G. & Holzer, C., 2012, 9th WPC, Natural Fibre and other innovative Composites Congress and Exhibition. p. A5-1-A5-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  139. Published

    Runner balancing in multi-cavity injection molds by time controlled valve gates

    Lucyshyn, T., Müller, F., Doppelmayer, N., Rath, G., Kukla, C. & Holzer, C., 2012, Proceedings of the Polymer Processing Society 28th Annual Meeting ~ PPS-28. p. xxx-xxx

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  140. Published

    Runner balancing in multi-cavity injection molds by time controlled valve gates

    Lucyshyn, T., Müller, F., Doppelmayer, N., Rath, G., Kukla, C. & Holzer, C., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  141. Published

    The effect of particle size and coating of CaCO3 on the foaming behavior of a styrene butadiene block copolymer

    Geißler, B., Laske, S., Holzer, C. & Langecker, G., 2012, The 28th International Conference of The Polymer Processing Society (PPS-28). p. 184-188

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  142. Published

    The Influence of nanostructures on adhesion and survival of adult neural stem cells

    Holzer, C., Andraschek, N., Balika, W., Katschnig, M., Laske, S., Patz, S., Trattnig, C., Fasching, U. & Schäfer, U., 2012, Congress Documentation of BioNanoMed 2012 3rd International Congress. p. D3-D3

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  143. Published

    The Influence of nanostructures on adhesion and survival of adult neutral stem cells

    Holzer, C., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  144. Published

    Thermal conductivity of polymer nanocomposites

    Kamaraj, M. P., 2012

    Research output: Thesis › Master's Thesis

  145. Published

    Tribological studies of PA66 nanocomposites filled with layered silicate clays

    Laske, S., Selvasankar, R. K., Kracalik, M., Holzer, C. & Winzer, M., 2012, The 28th International Conference of The Polymer Processing Society (PPS-28). p. xxx-xxx

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  146. Published

    Veränderungen der Struktur und der mechanischen Eigenschaften von polymeren Nanokompositen durch Variation der Prozessparameter beim Compoundieren

    Feuchter, M., Pinter, G., Maier, G., Witschnigg, A., Kracalik, M. & Laske, S., 2012, 21. Leobener Kunststoff-Kolloquium: Mit Compoundieren zum Erfolg. p. 77-95

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  147. Published

    Wireless In-Mold Sensor for Injection Molding: A new Approach

    Müller, F., Kukla, C., Lucyshyn, T. & Holzer, C., 2012, Proceedings of the Polymer Processing Society 28th Annual Meeting ~ PPS-28. p. XXX-XXX

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  148. 2011
  149. Published

    A PROCESS FOR PRODUCING SYNTHETIC PAPER AND PAPER THUS OBTAINED

    Laske, S. (Inventor), Langecker, G. R. (Inventor) & Friesenbichler, W. (Inventor), 19 Oct 2011, IPC No. B29C55/023, B29C55/16, Patent No. EP2376284 (A1)

    Research output: Patent

  150. Published

    EXPLOSIVE CARTRIDGE

    Moser, P. (Inventor), Bauer, F. (Inventor), Friesenbichler, W. (Inventor), Fertschej, A. (Inventor) & Schatzer, R. (Inventor), 29 Sept 2011, IPC No. F42D 1/ 10 A I, Patent No. CA2793308, Priority date 25 Mar 2011, Priority No. WO2011EP54635

    Research output: Patent

  151. Published

    EXPLOSIVE CARTRIDGE

    Moser, P. (Inventor), Bauer, F. (Inventor), Friesenbichler, W. (Inventor), Fertschej, A. (Inventor) & Schatzer, R. (Inventor), 29 Sept 2011, IPC No. F42D 1/ 10 A I, Patent No. WO2011117394, Priority date 25 Mar 2010, Priority No. EP20100157815

    Research output: Patent

  152. Published

    System zum Gestalten eines Formteils

    Langecker, G. (Inventor), Lucyshyn, T. (Inventor) & Fischer, K. (Inventor), 27 Jul 2011, Patent No. 10196048

    Research output: Patent

  153. Published

    System zum Gestalten eines Formteils

    Langecker, G. (Inventor), Lucyshyn, T. (Inventor) & Fischer, K. (Inventor), 30 Jun 2011, Patent No. 102009055314

    Research output: Patent

  154. Published

    Explosive cartridge cartouche explosive

    Bauer, F. (Inventor), Fertschej, A. (Inventor), Friesenbichler, W. (Inventor), Moser, P. (Inventor) & Schatzer, R. (Inventor), 25 Mar 2011

    Research output: Patent

  155. Published

    Effect of processing on the viscoelastic, tensile and optical properties of albumen/starch-based bioplastics

    Gonzalez-Gutierrez, J., Partal, P., Garcia-Morales, M. & Gallegos, C., 11 Feb 2011, In: Carbohydrate Polymers. 84, 1, p. 308-315

    Research output: Contribution to journal › Article › Research › peer-review

  156. Published

    A new injection moulding machine rheometer to study the rheological behaviour of polymer melts at very high shear-rates

    Selvasankar, R. K., Duretek, I., Friesenbichler, W. & Holzer, C., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  157. Published

    A new setup for viscosity measurements of fluids as a function of shear rate and pressure

    Gallaun, U., Zurk, A.-P., Lucyshyn, T., Kukla, C. & Holzer, C., 2011, Program & Abstracts of 27th Annual Meeting of the Polymer Processing Society . p. 276-276

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  158. Published

    A physical model for a quality control concept in injection moulding

    Lucyshyn, T., Kipperer, M., Kukla, C., Langecker, G. & Holzer, C., 2011, Program & Abstracts of 27th Annual Meeting of the Polymer Processing Society . p. 251-251

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  159. Published

    Berechnung der Einzugszone und der Aufschmelzzone eines konisch gleichlaufenden Doppelschneckenextruders

    Münzer, M. H., 2011

    Research output: Thesis › Master's Thesis

  160. Published

    Effect of organoclay surface treatment on the property profile of recycled PET nanocomposites

    Kracalik, M., Witschnigg, A., Laske, S. & Holzer, C., 2011, Proceedings of the European Polymer Congress 2011. p. 152-153

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  161. Published

    Effect of physical vapour deposition coating on the flow properties of the thermoplastics and wood plastic composites

    Duretek, I., Selvasankar, R. K. & Holzer, C., 2011,

    Program & Abstracts of 27th Annual Meeting of the Polymer Processing Society

    .     p. 236-236

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  162. Published

    Einfluss von Verarbeitungsparametern im Spritzguss und Fügen auf die Eigenschaften von mikrofluidischen Chips für medizintechnische Anwendungen

    Pfefferkorn, M. S., 2011

    Research output: Thesis › Master's Thesis

  163. Published

    Einsatz von Inline-NIR-Messtechnik für einen effektiven Compoundierprozess: Beispiel an polymeren Nanocomposites

    Kracalik, M., Laske, S., Witschnigg, A. & Holzer, C., 2011, 2. Tagung Innovation Messtechnik. p. 4-4

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  164. Published

    Einsatz von nanoskaligen Schichtsilikaten in Polymilchsäure

    Kracalik, M., Hirschenauer, M., Witschnigg, A., Laske, S. & Holzer, C., 2011,

    Polymerblends & Nanocomposites mit biobasierten Komponenten - 14. Problemseminar - Programm & Kurzreferate

    .     p. 40-40

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  165. Published

    Elongational and shear flow in polymer-clay nanocomposites measured by on-line extensional and off-line shear rheometry

    Kracalik, M., Laske, S., Witschnigg, A. & Holzer, C., 2011, In: Rheologica acta. 50, p. 937-944

    Research output: Contribution to journal › Article › Research › peer-review

  166. Published

    Extensional Rheology as Effective Tool for Characterization of Polymer Nanocomposites

    Kracalik, M., Laske, S. & Holzer, C., 2011, Novel Trends in Rheology IV - AIP Conference Proceedings. p. 208-218

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  167. Published

    Fundamental modelling of the expansion injection moulding with its simulation and the material degradation analyses on the moulded parts

    Rajganesh Jegadeesan, X., 2011

    Research output: Thesis › Doctoral Thesis

  168. Published

    Herstellung medienführender Leitungen durch Kombination von Coinjektion und Wasserinjektionstechnik

    Stückler, S., 2011

    Research output: Thesis › Master's Thesis

  169. Published

    Homogenitätsanalyse von Feststoffmischungen

    Eberhard, D., 2011

    Research output: Thesis › Master's Thesis

  170. Published

    Influence of induced shear energy and residence time on material properties of polypropylene nanocomposites

    Witschnigg, A., Laske, S., Duretek, I. & Holzer, C., 2011,

    Program & Abstracts of 27th Annual Meeting of the Polymer Processing Society

    .     p. 150-151

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  171. Published

    Influence of processing conditions and induced shear work on the thermal, rheological and mechanical behavior of polymer nanocomposites

    Mattausch, H., Laske, S., Duretek, I., Witschnigg, A. & Holzer, C., 2011,

    Program & Abstracts of 27th Annual Meeting of the Polymer Processing Society

    .     p. 157-158

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  172. Published

    Influence of shear energy on the properties of polyolefin nanocomposite pipes: Plastics Research Online, Reihentitel: 10.1002/spepro.003977

    Witschnigg, A., Laske, S., Kracalik, M. & Holzer, C., 2011

    Research output: Non-textual form › Web publication/site › Transfer

  173. Published

    Influence of the degree of exfoliation on the thermal conductivity of polypropylene nanocomposites

    Laske, S., Duretek, I., Witschnigg, A. & Holzer, C., 2011,

    Program & Abstracts of 27th Annual Meeting of the Polymer Processing Society

    .     p. 155-155

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  174. Published

    Influence of the heat transfer coefficient on the injection molding simulation of microstructures

    Müller, F., Lucyshyn, T., Kukla, C. & Holzer, C., 2011, Conference Proceedings - ICIT & MPT 2011 . p. 141-148

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  175. Published

    Investigations of adhesion on two-shot moulded parts

    Kisslinger, T., Lucyshyn, T., Doler, M., Langecker, G. & Holzer, C., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  176. Published

    Kunststoffverarbeitung-Vom Rohstoff zum fertigen Bauteil

    Piontek, M., Holzer, C. & Laske, S., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  177. Published

    Local structure around nano-clay agglomerates in PP composites – a scanning X-Ray diffraction study with sub micron resolution

    Feuchter, M., Maier, G. A., Burghammer, M., Kracalik, M., Laske, S., Keckes, J. & Pinter, G., 2011, European Polymer Congress 2011. p. 515-515

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  178. Published

    Measurement of the visual perceptibility of sink marks in injection molded parts

    Haba, D., 2011, 79 p.

    Research output: Thesis › Master's Thesis

  179. Published

    Measuring the pressure dependent viscosity at high shear rates using a new rheological injection mould

    Friesenbichler, W., Duretek, I., Rajganesh Jegadeesan, X. & Selvasankar, R. K., 2011, In: Polimery/Polymers. 56, 1, p. 58-62

    Research output: Contribution to journal › Article › Research › peer-review

  180. Published

    Mischteilberechnungen mittels FEM

    Kienzl, W., 2011, 113 p.

    Research output: Thesis › Master's Thesis

  181. Published

    Nanostructured polymer surfaces to optimize cell behaviour

    Holzer, C., Laske, S., Katschnig, M. & Balika, W., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  182. Published

    Nanostructured polymer surfaces to optimize cell behaviour

    Holzer, C., Katschnig, M., Kracalik, M., Andraschek, N., Laske, S., Schäfer, U. & Balika, W., 2011, Abstract Book. p. 72-72

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  183. Published

    Near infrared spectroscopy - a smart way of characterization and quality control of PP-NC

    Witschnigg, A., Laske, S., Holzer, C., Patel, R., Khan, A., Benkreira, H. & Coates, P., 2011, Enhanced Polymer Processing. p. 266-284

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  184. Published

    Numerical modelling of flow in conical co-rotating twin screw extruder

    Selvasankar, R. K., Schuschnigg, S., Fertschej, A. & Holzer, C., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  185. Published

    On the demolding of micro-structured surfaces for medical applications

    Struklec, T., 2011, 78 p.

    Research output: Thesis › Master's Thesis

  186. Published

    Polymeres Papier als Beispiel für Nachhaltigkeit durch Innovation

    Laske, S., Katschnig, M. & Holzer, C., 2011, Umweltverträgliche Produktion und nachhaltiger Erfolg - Chancen, Benchmarks & Entwicklungslinien. p. 92-100

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  187. Published

    Polymerpapier auf Basis nachwachsender polymerer Rohstoffe

    Laske, S. & Holzer, C., 2011, Kurzfassungen der Vorträge "Zukunft - Forum Papier - Österreichische Papierfachtagung 2011". p. 6-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  188. Published

    Replication of Stochastic and Geometric Micro Structures. Aspects of Visual Appearance

    Berger, G., Gruber, D. P., Friesenbichler, W., Teichert, C. & Burgsteiner, M., 2011, In: International polymer processing. XXVI, p. 313-322

    Research output: Contribution to journal › Article › Research › peer-review

  189. Published

    Surface Modification of Unfilled and Highly Filled Polylactic Acid Films Using Corona Discharge Treatment

    Laske, S., Rüf, E., Piontek, M. & Holzer, C., 2011, In: Journal of characterization and development of novel materials. 4, 2, p. 1-7

    Research output: Contribution to journal › Article › Research › peer-review

  190. Published

    The Future of Polymer Processing

    Holzer, C., 2011, Cetrdeseta obljetnica usmjerenja prerada polimera. p. 15-23

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  191. Published

    The Future of Polymer Processing

    Holzer, C., 2011, In: Polimeri. p. 124-129

    Research output: Contribution to journal › Article › Research › peer-review

  192. Published

    Verbundhaftungsuntersuchungen an Zweikomponenten-Spritzgussteilen

    Kisslinger, T., Lucyshyn, T., Doler, M., Langecker, G. & Holzer, C., 2011, 20. Leobener Kunststoff-Kolloquium - Polymerer Leichtbau. p. 153-162

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  193. Published

    Verfahrensentwicklung von physikalisch geschäumten Polypropylenplatten für den Einsatz als Kernmaterial von Sandwichverbunden

    Braun, A. C., 2011, 303 p.

    Research output: Thesis › Doctoral Thesis

  194. 2010
  195. Published

    Replication of micro-and nanostructures on polymer surfaces

    Holzer, C., Gobrecht, J., Schift, H. & Solak, H., 1 Oct 2010, In: Macromolecular Symposia. 296, 1, p. 316-323 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  196. Published

    METHOD FOR PRODUCING A SYNTHETIC PAPER AND PAPER PRODUCED THEREWITH

    Laske, S. (Inventor), Langecker, G. R. (Inventor) & Friesenbichler, W. (Inventor), 15 Jul 2010, IPC No. B29C55/02, B32B27/36, Patent No. WO2010078610 (A1)

    Research output: Patent

  197. Published

    METHOD FOR PRODUCING A SYNTHETIC PAPER AND PAPER PRODUCED THEREWITH

    Laske, S. (Inventor), Langecker, G. R. (Inventor) & Friesenbichler, W. (Inventor), 15 Jul 2010, IPC No. B29C55/12, Patent No. AT507721 (A2)

    Research output: Patent

  198. Published

    Development of highly-transparent protein/starch-based bioplastics

    Gonzalez-Gutierrez, J., Partal, P., Garcia-Morales, M. & Gallegos, C., Mar 2010, In: Bioresource technology. 101, 6, p. 2007-2013

    Research output: Contribution to journal › Article › Research › peer-review

  199. Published

    A Conical Co-Rotating Machine Puts on the Pressure

    Klammer, G., Holzer, C., Schuschnigg, S. & Selvasankar, R. K., 2010, In: Kunststoffe <München> / Kunststoffe international. p. 59-62

    Research output: Contribution to journal › Article › Research › peer-review

  200. Published

    Analyse des Prozessablaufs und des verarbeitungsbedingten Materialabbaus beim Expansionsspritzgießen

    Battisti, M., 2010

    Research output: Thesis › Master's Thesis

  201. Published

    Ceramic and Polymer Matrix Composites: Properties, Performance and Applications

    Kracalik, M., Laske, S. & Holzer, C., 2010, Polymer Matrix Composites: Properties, Performance and Applications. p. 169-194

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  202. Published

    Characterization of the Orientation Parameters Around Crack Tips in Unfilled and Nanofilled Poly(propylene) Using in-situ Synchrotron Small and Wide Angle Scanning Scattering Techniques

    Feuchter, M., Maier, G., Zizak, I., Pinter, G., Kracalik, M., Laske, S. & Langecker, G. R., 2010, MODERN TRENDS IN POLYMER SCIENCE-EPF 09. Vol. 296. p. 189-196 (MACROMOLECULAR SYMPOSIA).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  203. Published

    Comparative ecological assessment of a sheet of paper based on the biopolymer PLA and on normal pulp

    Katschnig, M., Laske, S. & Holzer, C., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  204. Published

    Comparative ecological assessment of a sheet of paper based on the biopolymer PLA and on normal pulp

    Katschnig, M., Laske, S. & Holzer, C., 2010, Book of Abstracts of ASPM 2010 Austrian-Slovenian Polymer Meeting. p. 122-122

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  205. Published

    Determination of the elongational viscosity of polymer nanocomposites using different measurement methods

    Mattausch, H., Laske, S. & Holzer, C., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  206. Published

    Determination of the elongational viscosity of polymer nanocomposites using different measurement methods

    Mattausch, H., Laske, S. & Holzer, C., 2010, Book of Abstracts of ASPM 2010 Austrian-Slovenian Polymer Meeting. p. 149-149

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  207. Published

    Determination of x-ray elastic constants and their applications to characterize microstresses in polypropylene nanocomposites

    Feuchter, M., Maier, G., Pinter, G., Kracalik, M. & Laske, S., 2010, Book of Abstracts. p. 54-55

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  208. Published

    Effect of the mixture composition on shear and extensional rheology of polyethylenterephthalate and acrylonitrilbutadienstyren nanocomposites

    Kracalik, M., Laske, S. & Holzer, C., 2010, Book of Abstracts of ASPM 2010 Austrian-Slovenian Polymer Meeting. p. 21-22

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  209. Published

    Einfluss des Verarbeitungsprozesses auf physikalische Eigenschaften von Nanocomposites

    Meister, S., 2010

    Research output: Thesis › Master's Thesis

  210. Published

    Ein innovativer systematischer Ansatz für die beschleunigte Produktentwicklung von komplexen Spritzgießteilen

    Friesenbichler, W., Brunnthaler, M., Altendorfer, F. & Bürtlmair, H., 2010, In: Österreichische Kunststoff-Zeitschrift. p. 10-13

    Research output: Contribution to journal › Article › Research › peer-review

  211. Published

    Elongational and shear flow in polymer-clay nanocomposites measured by on-line extensional and off-line shear rheometry

    Kracalik, M., Laske, S., Witschnigg, A. & Holzer, C., 2010, Book of Abstracts of Annual European Rheology Conference. p. 26-26

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  212. Published

    Ermittlung der mittleren Molmasse und Molmassenverteilung von ausgewählten Polyolefinen mit Hilfe eines Rotationsviskosimeters

    Plank, M., 2010, 87 p.

    Research output: Thesis › Master's Thesis

  213. Published

    Ermittlung der Transition-Temperature bei verschiedenen Kühlraten und deren Einfluss auf die Vorhersage von Schwindung und Verzug in der Spritzgusssimulation

    Knapp, G., 2010

    Research output: Thesis › Master's Thesis

  214. Published

    Erstellen eines Prüfprogramms für Masterbatch-Trägerpolymere

    Geißler, B., 2010

    Research output: Thesis › Master's Thesis

  215. Published

    Evaluierung moderner Herstellungsmethoden für Kunststoffzähne

    Rettenwander, T., 2010

    Research output: Thesis › Master's Thesis

  216. Published

    Experimentelle und numerische Untersuchungen des Einflusses von Spritzgieß-Parametern auf Bauteildimensionen unter Verwendung von zwei unterschiedlichen optischen Messsystemen

    Müller, F., 2010

    Research output: Thesis › Master's Thesis

  217. Published

    Experimentelle und simulationstechnische Evaluierung eines Qualitätsregelkonzeptes für das Spritzgießverfahren

    Kipperer, M., 2010

    Research output: Thesis › Master's Thesis

  218. Published

    Extrusion am IKV-Leoben, Ausgewählte Projekte aus der aktuellen Forschung

    Holzer, C., Laske, S., Fertschej, A. & Schuschnigg, S., 2010, Extrusionstechnik 2010 - Hochleistungsextrusion und Betriebskostenoptimierung. p. 81-100

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  219. Published

    Hochglanzoberflächen beim Spritzgießen - Quantitative topografische Beurteilung der Formenstahl- und Kunststoffoberfläche

    Berger, G., Friesenbichler, W., Reitter, M., Jutz, S. & Langecker, G., 2010, In: MP materials testing : Materialprüfung . 52, p. 211-221

    Research output: Contribution to journal › Article › Research › peer-review

  220. Published

    Hochglanzoberflächen beim Spritzgießen. Quantitive topografische Beurteilung der Formenstahl- und Kunststoffoberfläche

    Berger, G., Friesenbichler, W., Reitter, M., Jutz, S. & Langecker, G., 2010, In: MP materials testing : Materialprüfung . 52, p. 211-221

    Research output: Contribution to journal › Article › Research › peer-review

  221. Published

    Influence of Injection Molding Parameters and Aging on Geometry and Functionality of Plastic Targets for Mass Spectrometry

    Pöhl, A., 2010, 108 p.

    Research output: Thesis › Master's Thesis

  222. Published

    Influence of molecular structure on the extensional behaviour of polyethylene melts

    Duretek, I., Florian, M. & Holzer, C., 2010, Book of Abstracts of ASPM 2010 Austrian-Slovenian Polymer Meeting. p. 130-130

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  223. Published

    Influence of molecular structure on the extensional behaviour of polyethylene melts

    Duretek, I., Florian, M. & Holzer, C., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  224. Published

    Influence of shear energy and residence time on physical and mechanical properties of polyethylene nanocomposites

    Witschnigg, A., Laske, S. & Holzer, C., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  225. Published

    Influence of shear energy and residence time on physical and mechanical properties of polyethylene nanocomposites

    Witschnigg, A., Laske, S. & Holzer, C., 2010, Book of Abstracts of ASPM 2010 Austrian-Slovenian Polymer Meeting. p. 150-150

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  226. Published

    In-line characterization of polypropylene nanocomposites using FIT-NIR

    Witschnigg, A., Laske, S., Kracalik, M., Feuchter, M., Pinter, G., Maier, G., Märzinger, W., Haberkorn, M., Langecker, G. & Holzer, C., 2010, In: Journal of Applied Polymer Science. 117, p. 3047-3053

    Research output: Contribution to journal › Article › Research › peer-review

  227. Published

    In-line Qualitätskontrolle mittels Nah-Infrarot Spektroskopie

    Witschnigg, A., Laske, S. & Holzer, C., 2010, Proceedings - Grenzen von Kunststoffen neu definiert - Errungenschaften im Bereich Metallersatz und Leichtbau. p. 1-68

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  228. Published

    Investigations of Adhesion on Two-shot Moulded Parts

    Kisslinger, T., Lucyshyn, T., Doler, M., Langecker, G. & Holzer, C., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  229. Published

    Investigations of Adhesion on Two-shot Moulded Parts

    Kisslinger, T., Lucyshyn, T., Doler, M., Langecker, G. & Holzer, C., 2010, Book of Abstracts of ASPM 2010 Austrian-Slovenian Polymer Meeting. p. 111-111

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  230. Published

    INVESTIGATIONS OF ADHESION ON TWO-SHOT MOULDED PARTS

    Kisslinger, T., Lucyshyn, T., Doler, M., Langecker, G. & Holzer, C., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  231. Published

    Konischer Gleichläufer macht Druck

    Klammer, G., Holzer, C., Schuschnigg, S. & Selvasankar, R. K., 2010, In: Kunststoffe. p. 80-83

    Research output: Contribution to journal › Article › Research › peer-review

  232. Published

    Kunststoffverarbeitung - über Spritzguß und Extrusion hinaus

    Holzer, C., 2010, In: KC-aktuell (Informationen aus dem Kunstoff-Cluster). p. 1-3

    Research output: Contribution to journal › Article › Research › peer-review

  233. Published

    Mathematical modelling of the flow behaviour in the pressure build-up zone of a conical co-rotating twin screw extruder

    Selvasankar, R. K., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  234. Published

    Measurement of pressure dependent viscosity and its influence on injection molding simulation

    Friesenbichler, W., Rajganesh Jegadeesan, X., Lucyshyn, T., Filz, P. & Webelhaus, K., 2010, 4th International PMI Conference - Conference Proceedings. p. 215-219

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  235. Published

    Nanotechnology as a New Approach for Material Recycling of PET Bottles

    Kracalik, M., Laske, S. & Holzer, C., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  236. Published

    Nanotechnology as a New Approach for Material Recycling of PET Bottles

    Kracalik, M., Laske, S. & Holzer, C., 2010, Tagungsband zur 10. DepoTech-Konferenz. p. 617-620

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  237. Published

    New Insights into Characterization of Flow Properties of PP Based Wood Platic Composites

    Duretek, I., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  238. Published

    Praxisnahe Viskositäten für die Simulation

    Friesenbichler, W., Duretek, I. & Rajganesh Jegadeesan, X., 2010, In: Kunststoffe. 3, p. 37-40

    Research output: Contribution to journal › Article › Research › peer-review

  239. Published

    Real-time characterization of polypropylene nanocomposites in a corotating twin screw extruder

    Laske, S., Witschnigg, A., Kracalik, M., Feuchter, M., Pinter, G., Maier, G. A., Langecker, G. & Holzer, C., 2010, Proceedings ANTEC 2010. p. 0-0

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  240. Published

    Simulation of the Heating of Sheets using IR-Radiation

    Fertschej, A., Langecker, G. & Holzer, C., 2010, Book of Abstracts of ASPM 2010 Austrian-Slovenian Polymer Meeting. p. 114-114

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  241. Published

    Simulation of the Heating of Sheets using IR-Radiation

    Fertschej, A., Langecker, G. & Holzer, C., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  242. Published

    Structural influence of layered silicates on mechanical properties in polypropylene nanocomposites

    Feuchter, M., Maier, G. A., Pinter, G., Laske, S. & Kracalik, M., 2010, proceedings of 14th intern.Conference Polymeric Materials. p. 195-198

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  243. Published

    Theoretische und experimentelle Betrachtung eines kämmend konisch gleichlaufenden Doppelschneckenextruders

    Schuschnigg, S., Selvasankar, R. K. & Klammer, G., 2010, In: VLK-News. p. 16-17

    Research output: Contribution to journal › Article › Research › peer-review

  244. Published

    Theoretische Untersuchung der Einbettung von keramischen Komponenten in Leiterplatten

    Pletz, M., 2010

    Research output: Thesis › Master's Thesis

  245. Published

    Three dimensional modelling of flow in the pressure build-up zone of the new conical co-rotating twin screw extruder

    Selvasankar, R. K. & Schuschnigg, S., 2010, Book of Abstracts. p. 25-25

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  246. Published

    Untersuchungen zur Druck- und Temperaturabhängigkeit der Viskosität und der Wärmeleitfähigkeit von polymeren Werkstoffen

    Narnhofer, M., 2010

    Research output: Thesis › Master's Thesis

  247. Published

    Verarbeitung von Nanofüllstoffen mittels "Advanced Compounding"

    Mattausch, H., Laske, S. & Holzer, C., 2010, Proceedings - Grenzen von Kunststoffen neu definiert - Errungenschaften im Bereich Metallersatz und Leichtbau. p. 1-30

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  248. Published

    Verbundhaftungsuntersuchungen an Mehrkomponentenspritzgussteilen

    Grieshofer, H., 2010

    Research output: Thesis › Master's Thesis

  249. Published

    Verfahrenstechnische Auslegung der Ausstoßzone eines konischen gleichlaufenden Doppelschneckenextruders

    Himmler, G., 2010

    Research output: Thesis › Master's Thesis

  250. Published

    Vergleichende Ökobilanzierung von polymerem und herkömmlichem Kopierpapier

    Katschnig, M., 2010

    Research output: Thesis › Master's Thesis

  251. Published

    Verwendung einer FT-NIR Anlage an einem Doppelschneckenextruder: Aufbau, Inbetriebnahme sowie Grundlagen der chemometrischen Modellierung

    Witschnigg, A., 2010

    Research output: Book/Report › Book › Research

  252. Published

    Virtual determination of a process window for injection moulding

    Lucyshyn, T., Kukla, C., Kipperer, M. & Holzer, C., 2010, Book of Abstracts of ASPM 2010 Austrian-Slovenian Polymer Meeting. p. 4-4

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  253. Published

    Virtuelle Prozessauslegung beim Expansionsspritzgießen

    Rajganesh Jegadeesan, X., Friesenbichler, W. & Steinbichler, G., 2010, In: Kunststoffe. p. 204-208

    Research output: Contribution to journal › Article › Research › peer-review

  254. Published

    Wood Plastic Composites: determination and comparison of the specific energy consumption for WPC compounding methods based on two state-of-the-art formulations

    Kahr, S., 2010, 84 p.

    Research output: Thesis › Master's Thesis

  255. 2009
  256. Published

    Abrasive wear measurements of various polyamide compounds under real-injection molding conditions

    Oláh, L. & Friesenbichler, W., 2009,

    PPS 2009 Programme & Abstracts

    .     p. 56-56

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  257. Published

    Advanced characterization of polymer-clay nanocomposites: application of in-line near infrared spectroscopy and on-line extensional rheology

    Kracalik, M., Laske, S., Feuchter, M., Maier, G., Pinter, G., Langecker, G. & Holzer, C., 2009, EuroNanoForum 2009 - Nanotechnology for Sustainable Economy - Proceedings. p. 222-222

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  258. Published

    Advanced characterization of polymer-clay nanocomposites: application of in-line near infrared spectroscopy and on-line extensional rheology

    Kracalik, M., Laske, S., Feuchter, M., Maier, G., Pinter, G., Langecker, G. & Holzer, C., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  259. Published

    Advanced compounding: extrusion of polypropylene nanocomposites using the melt pump

    Kracalik, M., Laske, S., Gschweitl, M., Friesenbichler, W. & Langecker, G., 2009, In: Journal of Applied Polymer Science. 113, p. 1422-1428

    Research output: Contribution to journal › Article › Research › peer-review

  260. Published

    Advanced Compounding of Polymer Nanocomposites by assembling a melt pump

    Witschnigg, A., Laske, S., Kracalik, M., Feuchter, M., Maier, G., Pinter, G., Langecker, G. & Holzer, C., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  261. Published

    Advanced Compounding of Polymer Nanocomposites using a Melt Pump

    Laske, S., Kracalik, M., Feuchter, M., Maier, G., Pinter, G., Langecker, G. & Holzer, C., 2009, Proceedings of a Conference on Polyolefins and Polymelamines. p. 148-148

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  262. Published

    Assessment of Material Properties during compounding of Polymer Nanocomposites using In-Line near Infrared Spectroscopy

    Kracalik, M., Laske, S., Feuchter, M., Maier, G., Pinter, G., Langecker, G. & Holzer, C., 2009, Proceedings of a Conference on Polyolefins and Polymelamines. p. 150-150

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  263. Published

    Aufbau und Inbetriebnahme einer FT-NIR Anlage an einem gleichlaufenden Doppelschneckenextruder

    Witschnigg, A., 2009

    Research output: Thesis › Diploma Thesis

  264. Published

    A Wizard to Get the Processing Conditions for Injection Molds

    Fertschej, A., Friesenbichler, W. & Windhager, W., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  265. Published

    A Wizard to Get the Processing Conditions for Injection Molds

    Fertschej, A., Friesenbichler, W., Windhager, W. & Meister, M., 2009

    Research output: Non-textual form › Web publication/site › Research

  266. Published

    Berechnung von Extrusionsschnecken

    Schuschnigg, S., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  267. Published

    Biopolymer Paper for Laser Printing Applications

    Laske, S., Piontek, M., Friesenbichler, W., Wallner, G., Achatz, P., Burkhalter, R. & Langecker, G., 2009, PPS-25 Program & Abstracts. p. 78-78

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  268. Published

    Biopolymer Paper for Laser Printing Applications: 25th Annual Meeting of the Polymer Processing Society

    Langecker, G., Laske, S., Piontek, M., Friesenbichler, W., Wallner, G., Achatz, P. & Burkhalter, R., 2009

    Research output: Non-textual form › Web publication/site › Research

  269. Published

    Calculation of Residual Stresses in the Insert Molding Process Using the Finite Element Method

    Kisslinger, T., Fischer, K., Lucyshyn, T. & Langecker, G., 2009

    Research output: Non-textual form › Web publication/site › Research

  270. Published

    Characterization of the strain distribution around crack tips in unfilled and nanofilled polypropylene using in situ synchrotron small and wide angle scanning scattering techniques

    Feuchter, M., Maier, G., Zizak, I., Pinter, G., Kracalik, M., Laske, S. & Langecker, G., 2009, EPF'09 european polymer congress. p. 120-120

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  271. Published

    Compoundieren

    Witschnigg, A., Laske, S. & Holzer, C., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  272. Published

    Conception, calculation and analysis of a crosshead with double-coathanger distributor for physically foamed polyethylenes

    Richling, M. W., 2009

    Research output: Thesis › Master's Thesis

  273. Published

    Demolding Forces and Coefficients of Friction in Injection Molding. A new Mold and first results

    Berger, G., Friesenbichler, W., Schöfer, G. & Freudenschuß, G., 2009, In: Purasuchikkusu-eji = Plastics age. 55, p. 87-94

    Research output: Contribution to journal › Article › Research › peer-review

  274. Published

    Demolding forces and coefficients of friction in injection molding. A new practical measurement apparatus

    Berger, G. & Friesenbichler, W., 2009, Proceedings of ANTEC 2009. p. 1699-1703

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  275. Published

    Determination of hierarchical strains in intercalated clay-polypropylene nanocomposites

    Feuchter, M., Maier, G., Pinter, G., Kracalik, M., Laske, S. & Langecker, G., 2009, 2008 MRS Fall Meeting Symposium. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  276. Published

    Einfluss der spezifischen Wärmekapazität auf die Verzugsberechnung in Moldflow Plastics Insight (MPI) und experimentelle Validierung

    Schlattinger, P., 2009

    Research output: Thesis › Master's Thesis

  277. Published

    Einsatz von Talkum und Zeolith in Kunststoff-Compounds

    Piontek, M., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  278. Published

    Entformungskräfte beim Spritzgießen in Abhängigkeit von Oberflächenrauigkeit, Stahlwerkstoff, Vorzugsrichtung der Oberflächenstruktur, Beschichtung und Kunststofftyp

    Burgsteiner, M., 2009, 237 p.

    Research output: Thesis › Master's Thesis

  279. Published

    Estimation of reinforcement in compatibilized polypropylene nanocomposites by extensional rheology

    Laske, S., Kracalik, M., Gschweitl, M., Feuchter, M., Maier, G., Pinter, G., Thomann, R., Friesenbichler, W. & Langecker, G., 2009, In: Journal of Applied Polymer Science. 111, p. 2253-2259

    Research output: Contribution to journal › Article › Research › peer-review

  280. Published

    Estimation of reinforcement in compatibilized polypropylene nanocomposites by extensional rheology

    Laske, S., Kracalik, M., Gschweitl, M., Feuchter, M., Maier, G., Pinter, G., Thomann, R., Friesenbichler, W. & Langecker, G., 2009, In: VLK-News. 17. Jahrg., p. 6-8

    Research output: Contribution to journal › Article › Research › peer-review

  281. Published

    EXINMOLD

    Lucyshyn, T., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  282. Published

    Expansion injection moulding

    Rajganesh Jegadeesan, X., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  283. Published

    Expansionsspritzgießverfahren

    Rajganesh Jegadeesan, X., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  284. Published

    Flachfolien Coextrusion

    Piontek, M., Laske, S. & Holzer, C., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  285. Published

    From micro to advanced compounding: the way for applications of polymer nanocomposites

    Kracalik, M., Laske, S. & Holzer, C., 2009, Conference Proceedings NanoCon 2009 1st Conference with international participation. p. 38-38

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  286. Published

    FT-NIR as a determination method for reinforcement of polymer nanocomposites

    Laske, S., Kracalik, M., Feuchter, M., Pinter, G., Maier, G., Märzinger, W., Haberkorn, M. & Langecker, G., 2009, In: Journal of Applied Polymer Science. 114, p. 2488-2496

    Research output: Contribution to journal › Article › Research › peer-review

  287. Published

    Heizzeitverkürzung für den Elastomerspritzguss mittels eines Heiz-Scher-Mischteiles

    Perko, L., 2009

    Research output: Thesis › Master's Thesis

  288. Published

    Improved quality with smart moulds

    Kukla, C., 2009, ICIT&MPT 2009 Conference Proceedings . p. 169-172

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  289. Published

    Industrial Production of Polymer Nanocomposites

    Laske, S., Kracalik, M., Feuchter, M., Maier, G., Pinter, G. & Langecker, G., 2009, APT09 - Advandes in Plastics Technology - Abstracts of Papers. p. 6-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  290. Published

    Influence of cavity pressure and injection rate on the surface roughness of PP, PC, ABS and ABS-PC

    Pacher, G., Berger, G. & Friesenbichler, W., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  291. Published

    Influence of cavity pressure and injection rate on the surface roughness of PP, PC, ABS and ABS-PC

    Pacher, G., Berger, G. & Friesenbichler, W., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  292. Published

    Influence on Demolding in Injection Moulding

    Berger, G. & Friesenbichler, W., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  293. Published

    Influence on Demolding in Injection Moulding

    Berger, G. & Friesenbichler, W., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  294. Published

    Influences of steel grade and surface roughness on demolding forces in injection molding

    Berger, G., Friesenbichler, W. & Perko, J., 2009, Proceedings TOOL09. p. 25-37

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  295. Published

    Influences of Surface Roughness and Polypropylene Grade on Demolding Forces and Coefficients of Friction

    Berger, G., Friesenbichler, W., Burgsteiner, M. & Lorenz, B., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  296. Published

    Influences of Surface Roughness and Polypropylene Grade on Demolding Forces and Coefficients of Friction

    Berger, G., Friesenbichler, W. & Burgsteiner, M., 2009

    Research output: Non-textual form › Web publication/site › Research

  297. Published

    In-line characterization and quality control of PP nanocomposites using FT-NIR spectroscopy

    Witschnigg, A., Laske, S., Kracalik, M., Feuchter, M., Maier, G., Pinter, G., Langecker, G. & Holzer, C., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  298. Published

    In-line quality control of polymer nanocomposites using near-infrared spectroscopy

    Laske, S., Witschnig, A., Kracalik, M., Feuchter, M., Pinter, G., Maier, G., Langecker, G. R. & Holzer, C., 2009, NANOCON 2009 - 1st International Conference, Conference Proceedings. p. 120-125

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  299. Published

    "In-line" quality control of polymer nanocomposites using near-infrared spectroskopy

    Laske, S., Kracalik, M. & Holzer, C., 2009, Conference Proceedings NanoCon 2009 1st Conference with international participation. p. 38-39

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  300. Published

    Intelligente Hochleistungsmesstechnik

    Gallaun, U., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  301. Published

    Lösungskompetenz unter einem Dach

    Holzer, C., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  302. Published

    Measurement of pressure dependent viscosity and its influence on injection moulding simulation

    Holzer, C., Lucyshyn, T., Friesenbichler, W. & Duretek, I., 2009,

    Programme & Abstracts of PPS 2009

    .     p. 153-153

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  303. Published

    Messprinzipien von NIR und Rheotens

    Witschnigg, A., Laske, S. & Holzer, C., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  304. Published

    Messung von pvT-Daten bei prozessnahen Abkühlraten und deren Einfluss auf die Simulation von Schwindung und Verzug mit Moldflow Plastics Insight

    Lucyshyn, T., 2009

    Research output: Thesis › Doctoral Thesis

  305. Published

    Nanostructuring of surfaces for new functionalities

    Holzer, C., Gobrecht, J., Solak, H. H., Altana, C. & Hofmann, C., 2009, Vortrag und Proceedings zum 7th International Nanotechnology Symposium. p. 1-12

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  306. Published

    New Rheological Injection Mould to Measure Pressure Dependent Viscosity in High Shear Rate Range

    Friesenbichler, W., Rajganesh Jegadeesan, X., Duretek, I. & Ramesh Kumar, S., 2009,

    PPS-25 Program & Abstracts

    .     p. 185-185

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  307. Published

    On the evaluation of the visual impact of sink marks of injection molded parts

    Pacher, G. A., 2009

    Research output: Thesis › Master's Thesis

  308. Published

    Physical Model for the Expansion Injection Molding Process and Degradation Effects on the Injection Molded Parts due to Extreme Processing Conditions

    Jegadeesan, R., Friesenbichler, W., Langecker, G. & Steinbichler, G., 2009

    Research output: Non-textual form › Web publication/site › Research

  309. Published

    Physikalisches Schäumen

    Piontek, M., Laske, S. & Holzer, C., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  310. Published

    PIM - Feedstocks

    Duretek, I., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  311. Published

    Polymere Nanocomposites

    Laske, S., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  312. Published

    Polymer nanocomposites prepared by melt mixing: From laboratory to semi-industrial scale

    Kracalik, M., Laske, S. & Holzer, C., 2009, Advances in Plastics Technology - APT09 - Abstracts and Papers. p. 5-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  313. Published

    Polymer-Schichtsilikat Nanocompisites: Vom Labor zum industriellen Compoundieren

    Kracalik, M., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  314. Published

    Pressure dependent viscosity and its importance for injection molding simulations

    Rajganesh Jegadeesan, X., Friesenbichler, W., Duretek, I., Filz, P. & Webelhaus, K., 2009, Conference Proceedings. p. 217-222

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  315. Published

    Replication of a draw-polished cavity surface into PP and PC. Influence of flow length, wall thickness and injection molding parameters

    Burgsteiner, M., Berger, G. & Friesenbichler, W., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  316. Published

    Replication of a draw-polished cavity surface into PP and PC. Influence of flow length, wall thickness and injection molding parameters

    Burgsteiner, M., Berger, G. & Friesenbichler, W., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  317. Published

    Rheologische Analyse

    Duretek, I., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  318. Published

    Semi-industrial approach for wear measurement in injection moulds

    Friesenbichler, W. & Oláh, L., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  319. Published

    Simulation Aufheizprozess Thermoformen

    Fertschej, A., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  320. Published

    Simulation des Aufheizprozesses

    Fertschej, A., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  321. Published

    Simulation von Extrusionswerkzeugen

    Fertschej, A., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  322. Published

    Spritzgießsimulation

    Lucyshyn, T., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  323. Published

    Structure Replication in Injection Moulding

    Berger, G. & Friesenbichler, W., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  324. Published

    Structure Replication in Injection Moulding

    Berger, G. & Friesenbichler, W., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  325. Published

    Studies of the melting behaviour of polypropylene nanocomposites using x-ray diffraction

    Feuchter, M., Maier, G., Pinter, G., Kracalik, M., Laske, S. & Langecker, G., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  326. Published

    Studies on the melting behavior of polypropylene nano-composites using X-ray diffraction and differential scanning calorimetry

    Feuchter, M., Maier, G., Pinter, G., Kracalik, M., Laske, S. & Langecker, G., 2009, ANTEC 2009 Society of Plastics Engineers' Annual Technical Conference. p. 2642-2646

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  327. Published

    Synthetisches Kopierpapier auf Basis nachwachsender, polymerer Rohstoffe

    Laske, S., 2009

    Research output: Thesis › Doctoral Thesis

  328. Published

    Temperature and Pressure Dependence of Thermal Conductivity of Polypropylene Filled with Micro-Scale Fillers

    Duretek, I., Friesenbichler, W. & Kucher, C., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  329. Published

    Temperature and Pressure Dependence of Thermal Conductivity of Polypropylene Filled with Micro-Scale Fillers

    Duretek, I., Friesenbichler, W. & Kucher, C., 2009, Proceedings of a Conference on Polyolefins and Polymelamines. p. 96-98

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  330. Published

    Thermal Conductivity of Talc Filled Polypropylene Measured at High Pressures

    Duretek, I., Friesenbichler, W. & Kucher, C., 2009, PPS-25 Program & Abstracts . p. 135-135

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  331. Published

    Thermal Conductivity of Talc Filled Polypropylene Measured at High Pressures: 25th Annual Meeting of the Polymer Processing Society

    Duretek, I., Friesenbichler, W. & Kucher, C., 2009

    Research output: Non-textual form › Web publication/site › Research

  332. Published

    Verfahrenstechnische Analyse eines integrierten Systems zur beschleunigten Rezepturentwicklung auf Basis einer vollelektrischen 2K-Spritzgießmaschine und der Methoden des HTS (High Throughput Screening)

    Brunmayr, J., 2009

    Research output: Thesis › Diploma Thesis

  333. Published

    Verfahrensvergleich zur Herstellung von mikro- und nanostrukturierten Oberflächen

    Lemmerer, S., 2009

    Research output: Thesis › Master's Thesis

  334. Published

    Viskositätsdaten für die Spritzgieß-Simulation

    Duretek, I., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  335. Published

    Viskositätsdaten für die Spritzgieß-Simulation

    Friesenbichler, W., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  336. Published

    Wear of plastic mold steels under injection molding conditions

    Oláh, L. & Friesenbichler, W., 2009, In: Transactions of FAMENA. 33, p. 15-24

    Research output: Contribution to journal › Article › Research › peer-review

  337. 2008
  338. Published

    Advanced Compounding - Einsatz einer Schmelzepumpe und In-Line NIR Messtechnik für die Aufbereitung von Polypropylen Nanocomposites

    Kracalik, M., Laske, S., Feuchter, M., Maier, G., Pinter, G., Friesenbichler, W. & Langecker, G., 2008, Effizienz im Blickpunkt; Fakten - Technik - Konsequenzen. p. 1-21

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  339. Published

    Advanced Compounding of Polymer Nanocomposites: Assembling a Melt Pump and In-line Near Infrared Spectroscopy into Extrusion Line

    Kracalik, M., Laske, S., Feuchter, M., Maier, G., Pinter, G., Friesenbichler, W. & Langecker, G., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  340. Published

    A new practical measurement for demolding forces and coefficients of friction in injection molding

    Berger, G., Friesenbichler, W., Schöfer, G. & Freudenschuß, G., 2008, Proceeding of the PPS-24. p. 1-7

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  341. Published

    Berechnung der Eigenspannungen beim Umspritzen von Einlegeteilen mittels der Methode der Finiten Elemente

    Kisslinger, T., 2008

    Research output: Thesis › Diploma Thesis

  342. Published

    Berechnung der Strangaufweitung an einfachen Extrusionsdüsen unter Berücksichtigung des viskoelastischen Verhaltens von Kunststoffschmelzen mit Hilfe der FEM

    Picha, M., 2008

    Research output: Thesis › Diploma Thesis

  343. Published

    Determination of hierarchical strains in intercalated clay-polypropylene nanocomposites

    Maier, G., Feuchter, M., Pinter, G., Kracalik, M., Laske, S. & Langecker, G., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  344. Published

    Determination of hierarchical strains in intercalated clay-polypropylene nanocomposites

    Feuchter, M., Maier, G. A., Pinter, G., Kracalik, M., Laske, S. & Langecker, G. R., 2008, Materials Research Society Symposium Proceedings.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  345. Published

    Doppelschneckenextruder

    Schuschnigg, S., 2008, In: Triple m. p. 19-19

    Research output: Contribution to journal › Article › Research › peer-review

  346. Published

    Effect of Glass Fibers on Rheology, Thermal and Mechanical Properties of Recycled PET

    Kracalik, M., Pospisil, L., Slouf, M., Mikesova, J., Sikora, A., Simonik, J. & Fortelny, I., 2008, In: Polymer Composites. 29, p. 915-921

    Research output: Contribution to journal › Article › Research › peer-review

  347. Published

    Ermittlung der Fließfähigkeit und Plastifizierarbeit von handelsüblichen MIM-Feedstocks

    Yilmaz, A., 2008

    Research output: Thesis › Diploma Thesis

  348. Published

    FT-NIR AS A QUANTITATIVE DETERMINATION METHOD FOR POLYMER NANOCOMPOSITES

    Laske, S., Kracalik, M., Feuchter, M., Pinter, G., Maier, G., Märzinger, W. & Langecker, G., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  349. Published

    FT-NIR AS A QUANTITATIVE DETERMINATION METHOD FOR POLYMER NANOCOMPOSITES

    Laske, S., Kracalik, M., Feuchter, M., Maier, G., Pinter, G., Märzinger, W., Haberkorn, M. & Langecker, G., 2008, PPS-24. p. 290-290

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  350. Published

    Haft- und Entformungskräfte beim Spritzgießen in Abhängigkeit von Stahlwerkstoff, Oberflächenstruktur, Beschichtung und Kunststofftyp

    Freudenschuss, G., 2008, 148 p.

    Research output: Thesis › Master's Thesis

  351. Published

    Herstellung und Charakterisierung von hochgefüllten und geschäumten Flachfolien auf Basis nachwachsender Rohstoffe

    Piontek, M., 2008

    Research output: Thesis › Master's Thesis

  352. Published

    Kunststoffverarbeitung mit dem konisch gleichlaufenden NCT-Extruder

    Schuschnigg, S., 2008, Extrusion am Puls der Zeit. Im Fokus: Energie, Wirtschaftlichkeit und Qualität. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  353. Published

    Measurement of pvT-data at process near cooling rates for injection moulding simulation and comparison of simulation results with experimental data

    Lucyshyn, T., Langecker, G. & Fischer, K., 2008, PPS-24. p. 155-155

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  354. Published

    Measurement of pvT-data at process near cooling rates for injection moulding simulation and comparison of simulation results with experimental data

    Lucyshyn, T., Langecker, G. & Fischer, K., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  355. Published

    Measurement of PVT-data at process near cooling rates for injection moulding simulation and comparison of simulation results with experimental data

    Lucyshyn, T., Langecker, G. & Fischer, K., 2008, In: VLK-News. p. 4-7

    Research output: Contribution to journal › Article › Research › peer-review

  356. Published

    New Insights into Feedstock Behaviour and Injection Moulding Simulation for PIM

    Kukla, C., Duretek, I., Friesenbichler, W. & Thornagel, M., 2008, Euro PM2008 Proceedings Vol 2. p. 287-292

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  357. Published

    Optimization of Compatibilizer Admixture in Polypropylene-Organclay Nanocomposites by Extensional Rheology

    Kracalik, M., Laske, S., Feuchter, M., Maier, G., Pinter, G., Friesenbichler, W. & Langecker, G., 2008, ASPM 2008 - 9th Austrian Polymer Meeting - Book of Abstracts. p. 43-43

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  358. Published

    Preparation of Polymer-Nanocomposite-Masterbatch using a co-rotating twin screw extruder in combination with a melt pump

    Laske, S., Kracalik, M., Feuchter, M., Maier, G., Pinter, G. & Langecker, G., 2008, PPS-24. p. 96-96

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  359. Published

    Qualitätsgesicherte Aufbeereitung von Polymer-Nanocomposites unter Verwendung von in-line NIR-Spektroskopie

    Friesenbichler, W., Kracalik, M. & Laske, S., 2008, Extrusion - Rheologie und neue Technolgien zur Steigerung der Produktvität - Fortbildungsseminar. p. 1-16

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  360. Published

    Quality control of polymer nanocomposites compounding using small angle x-ray scattering

    Feuchter, M., Maier, G., Pinter, G., Kracalik, M. & Laske, S., 2008, ASPM 2008 - 9th Austrian Polymer Meeting - Book of Abstracts. p. 53-53

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  361. Published

    Recycled PET Nanocomposites Improved by Silanization of Organclays

    Kracalik, M., Studenovský, M., Mikesov, J., Sikora, A., Thomann, R., Friedrich, C., Fortelný, I. & Simoník, J., 2008, In: VLK-News. 16. Jahrg., p. 4-13

    Research output: Contribution to journal › Article › Research › peer-review

  362. Published

    Recycled Poly(ethylene terephthalate) Reinforced With Basalt Fibres: Rheology, Structure, and Utility Properties

    Kracalik, M., Pospisil, L., Slouf, M., Mikesova, J., Sikora, A., Simonik, J. & Fortelny, I., 2008, In: Polymer Composites. 29, p. 437-442

    Research output: Contribution to journal › Article › Research › peer-review

  363. Published

    Rheological characterisation of polymer melts on an injection moulding machine using a new slit die measurement system

    Selvasankar, R. K., 2008, 95 p.

    Research output: Thesis › Master's Thesis

  364. Published

    Small angle x-ray scattering as method to determine mechanism of despersion in polypropylene clay nanocomposites

    Feuchter, M., Maier, G., Pinter, G., Kracalik, M., Laske, S. & Langecker, G., 2008, P2008. p. A32-A32

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  365. Published

    To the Detection of Non-metallic Inclusions in Tool Steel Specimens for Polymer Processing Applications

    Gallaun, U., 2008, 89 p.

    Research output: Thesis › Master's Thesis

  366. Published

    Untersuchungen zum abrasiven Verschleiß von niedrig- bzw. hoch legierten Kunststoff-Formenstählen mit einem verbesserten Verschleißmodell

    Weiermair, G., 2008

    Research output: Thesis › Diploma Thesis

  367. Published

    Untersuchungen zur Wärmeleitfähigkeit von Polypropylen mit mikroskaligen Füllstoffen bei hohen Drücken

    Kucher, C., 2008

    Research output: Thesis › Diploma Thesis

  368. Published

    δ-phase characterization of superalloy Allvac 718 Plus™

    Sommitsch, C., Stotter, C., Leitner, H., Mitsche, S., Letofsky-Papst, I. & Stockinger, M., 2008, TMS2008 - 137th Annual Meeting and Exhibition Supplemental Proceedings: Materials Processing and Properties. p. 63-68 6 p. (TMS Annual Meeting; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  369. 2007
  370. Published

    Investigations of the Rheology and Reactivity of Extrudable Wood-Resin Compounds

    Braun, J., Duretek, I., Müller, U., Friesenbichler, W. & Endesfelder, A., 3 Apr 2007, In: Monatshefte für Chemie = Chemical monthly. 138.2007, p. 337-341 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  371. Published

    Simulation des spritzgießprozesses von mikrobauteilen

    Cramer, A., Michaeli, W., Friesenbichler, W. & Duretek, I., 1 Jan 2007, In: Zeitschrift Kunststofftechnik = Journal of plastics technology. 1

    Research output: Contribution to journal › Article › Research › peer-review

  372. Published

    Abhängigkeit des Exfolierungsgrades von Silikatschichten in einer Polymermatrix vom Compatibilizer - Nanoclay Mischverhältnis

    Laske, S., Kracalik, M., Gschweitl, M. & Langecker, G., 2007, 12 Problemseminar "Polymermischungen" Gefüllte und verstärkte Polymerblends - Nanoblends. p. 20-20

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  373. Published

    Abrasive/corresive wear on plastic mold steels, measured under practical processing conditions

    Friesenbichler, W., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  374. Published

    Abrasive/corresive wear on plastic mold steels, measured under practical processing conditions

    Friesenbichler, W., Berger, G. & Perko, J., 2007, PPS-23 Program and Book of Abstracts. p. 176-176

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  375. Published

    Abrasive/corresive wear on plastic mold steels, measured under practical processing conditions: PPS-23 The Polymer Processing Society 23rd Annual Meeting

    Friesenbichler, W., Berger, G. & Perko, J., 2007

    Research output: Non-textual form › Web publication/site › Research

  376. Published

    Aufbau und Inbetriebnahme einer Anlage zur Herstellung von exfolierten Nanocomposites

    Gschweitl, M., 2007

    Research output: Thesis › Diploma Thesis

  377. Published

    Aufheizen des Halbzeugs beim Thermoformen

    Fertschej, A., 2007, Fachtagung Thermoformen technische Bauteile - Vom Design zum Fertigteil. p. 1-26

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  378. Published

    Berechnungsmodell für Maddock- und Wendelscherteile in der Einschneckenplastifiziertechnologie

    Thiel, H., 2007, 97 p.

    Research output: Thesis › Diploma Thesis

  379. Published

    Calculation of the pressure and the temperature development in the solid conveying zone of grooved extruders

    Schuschnigg, S. & Langecker, G., 2007, PPS-23 Program and Book of Abstracts. p. 74-74

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  380. Published

    Calculation of the pressure and the temperature development in the solid conveying zone of grooved extruders: PPS-23 The Polymer Processing Society 23rd Annual Meeting

    Langecker, G. & Schuschnigg, S., 2007

    Research output: Non-textual form › Web publication/site › Research

  381. Published

    Charakterisierung von Spritzgieß-Formteiloberflächen

    Berger, G., Friesenbichler, W. & Gruber, D. P., 2007, In: KC-aktuell (Informationen aus dem Kunstoff-Cluster). p. 2-3

    Research output: Contribution to journal › Article › Research › peer-review

  382. Published

    Druckentwicklung in der Feststoffförderzone

    Schuschnigg, S. & Langecker, G., 2007, In: VLK-News. 3+4, p. 4-10

    Research output: Contribution to journal › Article › Research › peer-review

  383. Published

    Expertensystem für die Entwicklung spritzgegossener Formteile aus polymeren Werkstoffen

    Fischer, K., 2007, 182 p.

    Research output: Thesis › Doctoral Thesis

  384. Published

    Expertensystem Spritzgießtechnik: Vom Design bis zum qualitätsgeprüften Formteil

    Langecker, G., Fischer, K., Lucyshyn, T., Fertschej, A. & Hirner, M., 2007,

    H.F. Mark Symposium 2007 - Fortschritte auf dem Gebiet der Elastomere & Thermoplastischen Elastomere

    .     p. 1-17

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  385. Published

    Fast Determination of Reinforcement in Polymer Nanocomposites

    Kracalik, M., Laske, S., Gschweitl, M., Feuchter, M., Maier, G., Pinter, G., Friesenbichler, W. & Langecker, G., 2007, NanoEurope 2007. p. 13-14

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  386. Published

    Herstellung und Charakterisierung von hochgefuellten Folien aus thermoplastischem Polyester

    Wratschko, G., 2007, 131 p.

    Research output: Thesis › Diploma Thesis

  387. Published

    Neue Erkenntnisse zur Plastifiziereinheit von Spritzgießmaschinen basierend auf experimentellen Untersuchungen

    Gornik, C. J., 2007, 180 p.

    Research output: Thesis › Doctoral Thesis

  388. Published

    Optical measuring technique for the verification of warpage computations with moldflow plastics insight (MPI)

    Fischer, K., Wassertheurer, M., Lucyshyn, T. & Langecker, G., 2007, PPS-23 Program and Book of Abstracts. p. 83-83

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  389. Published

    Recycled PET Nanocomposites Improved by Silanization of Organoclays

    Kracalik, M., Studenovsky, M., Mikesova, J., Sikora, A., Thomann, R., Friedrich, C., Fortelny, I. & Simonik, J., 2007, In: Journal of Applied Polymer Science. 106, p. 926-937

    Research output: Contribution to journal › Article › Research › peer-review

  390. Published

    Recycled PET-organoclay nanocomposites with enhanced processing properties and thermal stability

    Kracalik, M., Studenovsky, M., Mikesova, J., Kovarova, J., Sikora, A., Thomann, R. & Friedrich, C., 2007, In: Journal of Applied Polymer Science. 106, p. 926-937

    Research output: Contribution to journal › Article › Research › peer-review

  391. Published

    Rheological Properties in Relation to Structure of Virgin and Recycled Polyehyleneterephthalate-Organoclay Nanocomposites

    Kracalik, M., Laske, S. & Langecker, G., 2007, 12. Problemseminar "Polymermischungen" Gefüllte und verstärkte Polymerblends - Nanoblends. p. 37-37

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  392. Published

    Simulation der Spritzgießprozesses von Mikrobauteilen

    Cramer, A., Michaeli, W., Friesenbichler, W. & Duretek, I., 2007, In: Zeitschrift Kunststofftechnik : Journal of plastics technology. 3, p. 1-26

    Research output: Contribution to journal › Article › Research › peer-review

  393. Published

    Simulation des Aufheizvorgangs beim Thermoformen

    Fertschej, A., Langecker, G. & Kertz, J., 2007, In: Kunststoffe. 97, p. 62-65

    Research output: Contribution to journal › Article › Research › peer-review

  394. Published

    Simulation fo the heating step within the thermoforming process using the finite difference method

    Fertschej, A. & Langecker, G., 2007, PPS-23 Program and Book of Abstracts. p. 113-113

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  395. Published

    Simulation of the Heating Cycle during Thermoforming

    Fertschej, A., Langecker, G. & Kertz, J., 2007, In: Kunststoffe. 97, p. 37-39

    Research output: Contribution to journal › Article › Research › peer-review

  396. Published

    Untersuchungen zu Schwindung und Verzug von Schachtelformteilen mit verschiedenen Wanddickenkombinationen

    Zaucher, P., 2007

    Research output: Thesis › Diploma Thesis

  397. 2006
  398. Published

    19. Leobener Kunststoff Kolloquium - Spritzgieß- und Extrusionstechnik - Innovationen aus Industrie und Forschung

    Friesenbichler, W. (Editor) & Laske, S. (Editor), 2006, Eigenverlag.

    Research output: Book/Report › Book › Research

  399. Published

    Abrasive/corresive Wear on Plastic Mould Steels, measured under practical conditions

    Friesenbichler, W., Langecker, G. & Caliskanoglu, D., 2006, Tooling Materials and their applications from research to market. p. 267-290

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  400. Published

    A Desgin Support System for Plastic Injection Molds: 22nd Annual Meeting of the Polymer Processing Society, Conference Proceedings

    Langecker, G., Lucyshyn, T. & Fischer, K., 2006

    Research output: Non-textual form › Web publication/site › Research

  401. Published

    A Design Support System for Plastic Injection Molds

    Fischer, K., Lucyshyn, T. & Langecker, G., 2006, Program and Abstracts of the 22nd Annual Meeting of the Polymer Processing Society, Yamagata, Japan 2006. p. 216-216

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  402. Published

    A new practical testing apparatus to evaluate corrision on plastic mold steel

    Friesenbichler, W., Berger, G., Langecker, G., Caliskanoglu, D., Hiebeler, B. J. & Perko, J., 2006, Tooling materials and their applications from research to market. p. 291-298

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  403. Published

    Charakterisierung von hochglanzpolierten Werkzeugoberflächen und den damit abgeformten Kunststoffformteilen

    Reitter, M., 2006, 142 p.

    Research output: Thesis › Diploma Thesis

  404. Published

    Detection of Surface Structure and Appearance of Injection Molded Parts.

    Langecker, G., Friesenbichler, W., Berger, G. R. & Gruber, D., 2006, Program and Abstracts of the 22nd Annual Meeting of the Polymer Processing Society, Yamagata, Japan 2006. p. 218-218

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  405. Published

    Detection of Surface Structure and Appearance of Injection Molded Parts. 22nd Annual Meeting of the Polymer Processing Society, Conference Proceedings

    Langecker, G., 2006

    Research output: Non-textual form › Web publication/site › Research

  406. Published

    Druckentwicklung in der Feststoffförderzone

    Schuschnigg, S. & Langecker, G., 2006, 19. Leobener Kunststoff Kolloqium - Spritzgieß- und Extrusionstechnik - Innovationen aus Industrie und Forschung. p. 1-18

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  407. Published

    EXINMOLD: Ein Expertensystem für die Entwicklung von Spritzgießwerkzeugen

    Fischer, K., Langecker, G., Lucyshyn, T. & Hirner, M., 2006, 19. Leobener Kunststoff Kolloquium - Spritzgieß- und Extrusionstechnik - Innovationen aus Industrie und Forschung. p. 1-14

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  408. Published

    Forschung für die Praxis am Institut für Kunststoffverarbeitung - Ausewählte Beispiele aus den Arbeiten der letzten 17 Jahre

    Friesenbichler, W., 2006, 19. Leobener Kunststoff Kolloquium - Spritzgieß- und Extrusionstechnik - Innovationen aus Industrie und Forschung. p. 1-36

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  409. Published

    Hochglanzoberflächen von Spritzgussteilen, Herstellung und Charakterisierung

    Friesenbichler, W., Langecker, G., Berger, G., Reitter, M. & Jutz, S., 2006, 19. Leobener Kunststoff Kolloqium - Spritzgieß- und Extrusionstechnik - Innovationen aus Industrie und Forschung. p. 1-16

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  410. Published

    Influence of pvT-Data Measured at High Cooling Rates on Injection Molding Simulation Results

    Lucyshyn, T., Duretek, I., Langecker, G. & Fischer, K., 2006, Program and Abstracts of the 22nd Annual Meeting of the Polymer Processing Society, Yamagata, Japan 2006. p. 237-237

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  411. Published

    Influence of pvT-Data Measured at High Cooling Rates on Injection Molding Simulation Results: 22nd Annual Meeting of the Polymer Processing Society, Conference Proceedings

    Langecker, G., Lucyshyn, T., Fischer, K. & Duretek, I., 2006

    Research output: Non-textual form › Web publication/site › Research

  412. Published

    Investigation of the rheology and reactivity of extrudable wood-resin-compounds

    Braun, J., Duretek, I., Müller, U., Friesenbichler, W. & Endesfelder, A., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  413. Published

    Minimierung von Orientierungen von Platten in einer Extrusionsanlage mittels eines ausgewogenen Temperatur- und Geschwindigkeitskonzeptes der Glättwalzen und Nachfolgeeinheiten

    Haager, J., 2006

    Research output: Thesis › Diploma Thesis

  414. Published

    Polymere Nanocomposites

    Laske, S., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  415. Published

    Praxisnahe Prüfmethoden für die Messung des abrasiven und korrosiven Verschleißes

    Friesenbichler, W., Berger, G. & Perko, J., 2006, 19. Leobener Kunststoff Kolloquium - Spritzgieß- und Extrusionstechnik - Innovationen aus Industrie und Forschung. p. 1-21

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  416. Published

    Praxisnahe Verschleißprüfung

    Friesenbichler, W., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  417. Published

    Rechnerische und experimentelle Untersuchungen zu Schwindung und Verzug von teilkristallinen Kunststoffen

    Wassertheurer, M., 2006

    Research output: Thesis › Diploma Thesis

  418. Published

    Simulation des Thermoformprozesses

    Fertschej, A., 2006, 19. Leobener Kunststoff Kolloquium - Spritzgieß- und Extrusionstechnik - Innovationen aus Industrie und Forschung. p. 1-15

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  419. Published

    Simulation und Einfluss des Kühlprozesses auf die Morphologie von PP-Rohren

    Nestelberger, S., 2006, 132 p.

    Research output: Thesis › Diploma Thesis

  420. Published

    Spritzgießsimulation - Einfluss der Stoffdaten auf die Vorhersage von Schwindung und Verzug

    Lucyshyn, T., Duretek, I., Fischer, K. & Langecker, G., 2006, 19. Leobener Kunststoff Kolloquium - Spritzgieß- und Extrusionstechnik - Innovationen aus Industrie und Forschung. p. 1-17

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  421. Published

    Stoffdaten für die Simulation

    Duretek, I., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  422. Published

    Stoffdaten und Simulation

    Lucyshyn, T., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  423. Published

    Study on rheological behaviour of polymer melts at high shear rates using a new micro-rheology technique

    Duretek, I., Friesenbichler, W., Schuschnigg, S., Jegadeesan, R. & Langecker, G., 2006, Past and future of polymer engineering technology and science. p. 117-130

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  424. Published

    Study on rheological behaviour of polymer melts at increased pressure levels with the consideration of the compression heat

    Rajganesh Jegadeesan, X., Friesenbichler, W., Duretek, I., Schuschnigg, S. & Langecker, G., 2006, The Chain of Knowledge - From Catalyst to Application. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  425. Published

    Untersuchungen zur Abformung geometrischer und stochastischer Strukturen an Spritzgießformteilen

    Berger, G., 2006

    Research output: Thesis › Doctoral Thesis

  426. Published

    Ursache von Tigerstreifen auf Spritzgussteilen und deren Vorhersage mittels Spritzgieß-Simulation

    Gsellmann, G. F., 2006, 115 p.

    Research output: Thesis › Diploma Thesis

  427. Published

    Viscoelastic properties of unreinforced and reinforced plastic lumber

    Stadler, M. A., 2006

    Research output: Thesis › Diploma Thesis

  428. Published

    Viskositätsmessungen bei extrem hohen Schergeschwindigkeiten unter Berücksichtigung von Schererwärmung und Druckeinfluss

    Duretek, I., Friesenbichler, W., Schuschnigg, S. & Rajganesh Jegadeesan, X., 2006, 19. Leobener Kunststoff Kolloquium - Spritzgieß- und Extrusionstechnik - Innovationen aus Industrie und Forschung. p. 1-20

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  429. 2005
  430. Published

    A New Plasticating Model for Amorphous and Semi-crystalline Polymers in Single Screw Extruders

    Langecker, G. & Zitzenbacher, G., 2005, In: International polymer processing. 4, p. 360-368

    Research output: Contribution to journal › Article › Research › peer-review

  431. Published

    Berechnung von Mischteilen für Schubschnecken

    Langecker, G., Wieczorek, A. & Gornik, C., 2005, In: Kunststoffe - Plast Europe. 95, p. 92-95

    Research output: Contribution to journal › Article › Research › peer-review

  432. Published

    Calculating Mixing Sections for Reciprocating Screws

    Langecker, G., Wieczorek, A. & Gornik, C., 2005, In: Kunststoffe - Plast Europe. p. 1-4

    Research output: Contribution to journal › Article › Research › peer-review

  433. Published

    Ermittlung der Reibwerte von Kunststoffgütern

    Langecker, G., Schatzer, R. & Zitzenbacher, G., 2005, In: Kunststoffe - Plast Europe. 95, p. 43-47

    Research output: Contribution to journal › Article › Research › peer-review

  434. Published

    Investigation of Flow Behaviour of Extrudable Wood/Melamine Resin Composites

    Nguyen, H. L., Duretek, I., Müller, U., Friesenbichler, W. & Endesfelder, A., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  435. Published

    Investigation of Flow Behaviour of Extrudable Wood/Melamine Resin Composites

    Nguyen, H. L., Duretek, I., Müller, U., Friesenbichler, W. & Endesfelder, A., 2005, Proceedings of the 2nd Annual European Rheology Conference. p. ---

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  436. Published

    Measurement of polymer melts’ viscosity at increased pressure levels with the consideration of the compression heat

    Rajganesh Jegadeesan, X., 2005, 98 p.

    Research output: Thesis › Master's Thesis

  437. Published

    Moderne Berechnungsmethoden zur Auslegung von Schnecken und Extrusionswerkzeugen

    Langecker, G. & Fertschej, A., 2005, In: Österreichische Kunststoff-Zeitschrift. p. 192-195

    Research output: Contribution to journal › Article › Research › peer-review

  438. Published

    Polymer Melt Rheology at High shear rates Using a New Micro-Rheology Technique,

    Friesenbichler, W., Langecker, G., Duretek, I. & Schuschnigg, S., 2005, Proceeding of the 21st Annual Meeting of the Polymer Processing Society. p. 87--

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  439. Published

    Schwindung und Verzug folienhinterspritzter Formteile

    Fertschej, A. & Langecker, G., 2005, In: Kunststoffe - Plast Europe. 95, p. 43-45

    Research output: Contribution to journal › Article › Research › peer-review

  440. Published

    Simulation des Aufheizvorganges beim Thermoformen mittels der Methode der Finiten Differenzen

    Kertz, J., Fertschej, A. & Langecker, G., 2005, In: VLK-News. 13, p. 4-7

    Research output: Contribution to journal › Article › Research › peer-review

  441. Published

    Untersuchung der Abformgüte unterschiedlicher Oberflächenstrukturen beim Spritzgießen von PP und PC unter Variation der Prozessparameter

    Hödl, H. M., 2005, 131 p.

    Research output: Thesis › Diploma Thesis

  442. 2004
  443. Published

    3D-Bauteilvermessung im Spritzguss-Werkzeugbau

    Lucyshyn, T., Fischer, K. & Langecker, G., 2004, In: VLK-News. p. 8-11

    Research output: Contribution to journal › Article › Research › peer-review

  444. Published

    Rheological Characterization of Extrudable Wood/Melamine Resin Composites

    Müller, U., Nguyen, H. L., Rätzsch, M., Duretek, I. & Friesenbichler, W., 2004.

    Research output: Contribution to conference › Poster › Research › peer-review

  445. 2003
  446. Published

    By-Pass-Extrusionsrheometer - Bestimmung des Fließverhaltens von PVC-U Compounds

    Duretek, I. & Langecker, G., 2003, In: VLK-News. p. 33-37

    Research output: Contribution to journal › Article › Research › peer-review

  447. 2002
  448. Published

    Characterisation of the thermo-oxidative degradation of polyethylene pipes by chromatographical, rheological and thermo-analytical methods

    Pinter, G., Duretek, I., Aust, N. & Lang, R. W., 24 Jun 2002, In: Macromolecular Symposia. 181, p. 213-223 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  449. 1998
  450. Published

    Berechnung der rotatorischen Strömung, Verweilzeit und Deformation in der Meteringzone eines Einschneckenextruders

    Zitzenbacher, G., 14 Dec 1998, 92 p.

    Research output: Thesis › Diploma Thesis › peer-review

  451. Published

    Alternative Verfahren zur schnellen Herstellung von Prototypenwerkzeugen

    Duretek, I. & Santek, D., 1998, In: Stahl : Zeitschrift für den High-Tech-Werkstoff . 6, p. 30-32

    Research output: Contribution to journal › Article › Research › peer-review

  452. Published

    Rheological measurements on the by-pass-extrusion rheometer at flexible polyvinylchloride

    Duretek, I., Friesenbichler, W. & Langecker, G., 1998, Application and processing of plastics and rubber. p. 31-35

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  453. 1997
  454. Published

    Die Rapid Prototyping Verfahren und ihre Abgrenzung zueinander

    Duretek, I. & Santek, D., 1997, In: GAK : Gummi, Fasern, Kunststoffe. 50, p. 852-861

    Research output: Contribution to journal › Article › Research › peer-review

  455. Published

    Prototypen mittels Rapid Prototyping Verfahren

    Duretek, I. & Santek, D., 1997, In: Metall. 51, p. 726-729

    Research output: Contribution to journal › Article › Research › peer-review

  456. Published

    Rapid Tooling - Verfahren zur Herstellung metallischer Bauteile und Prototypen Werkzeuge

    Duretek, I. & Santek, D., 1997, In: Österreichische Kunststoff-Zeitschrift. 28, p. 184-190

    Research output: Contribution to journal › Article › Research › peer-review

  457. Published

    Rheological properties of polymer melts

    Duretek, I., 1997, MATEST '97, International conference 'material testing'. p. 255-262

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  458. Published

    Rheological properties of polymer melts

    Duretek, I., 1997.

    Research output: Contribution to conference › Poster › Research › peer-review

  459. 1996
  460. Published

    Auswirkung der Versuchsparameter auf die Meßergebnisse von p-v-T-Diagrammen für Thermoplaste und Kautschuke

    Duretek, I., Langecker, G. & Friesenbichler, W., 1996, In: Polimeri. 17, p. 177-182

    Research output: Contribution to journal › Article › Research › peer-review

  461. Published

    Rapid Prototyping schneller Modellbau aus CAD-Daten

    Santek, D. & Duretek, I., 1996, In: Österreichische Kunststoff-Zeitschrift. 27, p. 82-85

    Research output: Contribution to journal › Article › Research › peer-review

  462. 1995
  463. Published

    Auswirkung der Versuchsparameter auf die Messergebnisse von pvT-Diagrammen für Thermoplaste und Kautschuke

    Duretek, I., Langecker, G. & Friesenbichler, W., 1995, 13.Days of Plastics and Rubber Engineers Society. p. 66-69

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Previous 1 2 Next
View graph of relations

Contact information

Otto Glöckel-Straße 2/III, 8700 Leoben
  • Main phone number: +43 3842 402 3501