Theses/Final papers

1 - 100 out of 5,329Page size: 100

10
20
50
100

Sort by: Type

Doctoral Thesis › Research
Published
"Corporate Innovation" - Management von Innovationen im Konzern
Wipplinger, A. C., 2005
Research output: Thesis › Doctoral Thesis
Published
A Breakage Model for Discrete Element Simulations Applied to Iron Ore Sinter
Denzel, M., 2023
Research output: Thesis › Doctoral Thesis
Published
A CFD–DEM model for nitrogen oxide prediction in shaft furnaces using OpenFOAM
Pollhammer, W., 2019
Research output: Thesis › Doctoral Thesis
Published
A Methodology for Dynamic Belt Simulation
Fimbinger, E., 2021
Research output: Thesis › Doctoral Thesis
Published
A Modeling Framework for Enhanced Reliability of Printed Circuit Boards and Power Electronics
Gschwandl, M., 2020
Research output: Thesis › Doctoral Thesis
Published
A Multi-method Atomistic Study of Protective Nitride Coatings: from Crystalline to Amorphous Materials
Nayak, G. K., 2023
Research output: Thesis › Doctoral Thesis
Published
A New Approach for Modeling Dual Porosity Reservoirs Using Recovery Curves
Pirker, B., 2008, 142 p.
Research output: Thesis › Doctoral Thesis
Published
A New Approach to History Matching of Water Driven Oil Reservoirs
Abrahem, F., 2010
Research output: Thesis › Doctoral Thesis
Published
A Recovery Curve Based Method for Calculation of the Matrix-Fracture Mass Transfer in Naturally Fractured Petroleum Reservoirs
Steiner, C., 2018
Research output: Thesis › Doctoral Thesis
Published
A contribution towards the practical implementation of stress management concepts in underground mining
Ladinig, T., 2022
Research output: Thesis › Doctoral Thesis
Published
A knowledge-based system for contaminated sites management
Bezama, A. I., 2006, 197 p.
Research output: Thesis › Doctoral Thesis
Published
A multi-technical mineralogical,petrological and geochemical approach to the origin of ore mineralizations in the mafic - ultramafic rocks of the Ivrea-Verbano Zone, Piedmont, Northern Italy
Kollegger, P., 2013, 191 p.
Research output: Thesis › Doctoral Thesis
Published
A numerical modeling strategy for the damage-relevant evaluation of metrologically inaccessible thermo-mechanical milling tool loads
Nemetz, A., 2019
Research output: Thesis › Doctoral Thesis
Published
A petrographic-coded model - Derivation of relationships between thermal and other physical rock properties
Gegenhuber, N., 2011, 130 p.
Research output: Thesis › Doctoral Thesis
Published
A study on macrosegregation in continuous casting of bronze
Grasser, M., 2008
Research output: Thesis › Doctoral Thesis
Published
A systematic investigation of fracture in polyamide 12
Messiha, M., 2022
Research output: Thesis › Doctoral Thesis
Published
Ab initio Calculation of Elastic Properties: General Implementation and Speciﬁc Application to NiTi as a Shape-Memory Alloy
Golesorkhtabar, R., 2013
Research output: Thesis › Doctoral Thesis
Published
Ab initio study of martensitic and ordering transformations in intermetallic TiAl-alloys
Abdoshahi, N., 2021
Research output: Thesis › Doctoral Thesis
Published
Ab-initio based modelling of hydrogen embrittlement in steel.
Kholtobina, A., 2020
Research output: Thesis › Doctoral Thesis
Published
Abschätzung der Schaumeigenschaften durch Messung der rheologischen Materialeigenschaften und gezielte Beeinflussung der Schaummorphologie durch Anpassung der Materialformulierungen und Düsengeometrie in der Schaumextrusion
Walluch, M., 2019
Research output: Thesis › Doctoral Thesis
Published
Acoustic and Statistical Methods for Sucker Rod Pump States Description
Chevelcha, E., 2014, 129 p.
Research output: Thesis › Doctoral Thesis
Published
Additive manufacturing of thermal management-relevant hybrid structures
Wallis, C., 2019
Research output: Thesis › Doctoral Thesis
Published
Adhesion of critical interfaces in microelectronics
Kleinbichler, A., 2018
Research output: Thesis › Doctoral Thesis
Published
Advanced Characterization of the Tensile and Compressive Behavior of PP and PP Composites
Jerabek, M. J., 2009
Research output: Thesis › Doctoral Thesis
Published
Advanced Diffraction Techniques for Microstructure and Stress Characterisation at Multiple Scales
Stefenelli, M., 2014
Research output: Thesis › Doctoral Thesis
Published
Advanced Modeling and Analysis of Electrical Grids for Multi-Energy System Approaches
Traupmann, A., 2023
Research output: Thesis › Doctoral Thesis
Published
Advanced Nanoindentation Techniques for the Extraction of Material Flow Curves
Leitner, A., 2018
Research output: Thesis › Doctoral Thesis
Published
Advanced TiAlTaN hard coatings for cutting tools
Großmann, B., 2018
Research output: Thesis › Doctoral Thesis
Published
Advanced characterization techniques for the knowledge-based design of hard coatings
Tkadletz, M., 2015, 117 p.
Research output: Thesis › Doctoral Thesis
Published
Advanced in-situ electrochemical nanoindentation for investigating hydrogen-materials interactions
Ebner, A., 2021
Research output: Thesis › Doctoral Thesis
Published
Advanced mechanical characterizations and thermomechanical modeling of shaped alumina spinel material in steel ladle
Samadi, S., 2021
Research output: Thesis › Doctoral Thesis
Published
Advanced micromechanical and pore structural characterization of organic matter-rich rocks: Toward a better understanding of dual porosity and permeability
Vranjes-Wessely, S., 2021
Research output: Thesis › Doctoral Thesis
Published
Advanced precipitation characterisation of Fe-alloys
Schober, M., 2010
Research output: Thesis › Doctoral Thesis
Published
Advancing Industry 4.0: AI-Enhanced In-Line MIMO Quality Control for Piano-Black Curved Plastic Injection Molded Parts with OPC UA Integration
Saeidi Aminabadi, S., 2023
Research output: Thesis › Doctoral Thesis
Published
Advancing Mechanical Property Characterisation for Metallic Foils using Experiments, Simulations, and Machine Learning
Trost, C. O. W., 2023
Research output: Thesis › Doctoral Thesis
Published
Age Hardening in Transition Metal Aluminium Nitride Thin Films Studied at the Atomic Scale
Rachbauer, R., 2011, 58 p.
Research output: Thesis › Doctoral Thesis
Published
Aging Behavior of Polymeric Absorber Materials for Solar Thermal Collectors
Kahlen, S., 2009
Research output: Thesis › Doctoral Thesis
Published
Aging Mechanism and Material Ranking of PE Pipe Grades in Aqueous Chlorine Dioxide and Hypochlorite Solutions
Bredacs, M., 2020
Research output: Thesis › Doctoral Thesis
Published
Aging and long-term performance of elastomers for utilization in harsh environments
Balasooriya Arachchige, W. N., 2019
Research output: Thesis › Doctoral Thesis
Published
Al-Cr-N thin film design for high temperature applications
Willmann, H., 2007
Research output: Thesis › Doctoral Thesis
Published
AlCr(Si,B)N – Design and Performance of Quaternary Nitride Coatings
Tritremmel, C., 2013, 143 p.
Research output: Thesis › Doctoral Thesis
Published
AlCrN coatings: Structure, Properties and Application Potentials
Reiter, A. E., 2009, 132 p.
Research output: Thesis › Doctoral Thesis
Published
AlCrVN - Design of high-temperature low-friction coatings
Franz, R., 2007, 134 p.
Research output: Thesis › Doctoral Thesis
Published
Algebraic and Geometric Techniques for Optimization in Metric Vision
Harker, M., 2008, 198 p.
Research output: Thesis › Doctoral Thesis
Published
Alloying- and process-controlled texture and microstructure engineering in aluminum alloys
Grasserbauer, J., 2021
Research output: Thesis › Doctoral Thesis
Published
Alternative Verwertungsstrategien für sekundäre Zinkkonzentrate
Benigni, C., 20 Apr 2018, 173 p.
Research output: Thesis › Doctoral Thesis
Published
Alternative methods for the crosslinking of poly(vinyl alcohol) by the use of functionalised inorganic particles - A water-based approach towards environmentally benign coating materials
Schauberger, J. G., 2013, 219 p.
Research output: Thesis › Doctoral Thesis
Published
Amelioration and market strategies for zinc oxide with focus on secondary sources
Steinlechner, S., 2013, 166 p.
Research output: Thesis › Doctoral Thesis
Published
Ammonsulfat zur selektiven nicht-katalytischen Stickoxidreduktion von Zementwerksabgasen
Hollauf, B., 2010, 192 p.
Research output: Thesis › Doctoral Thesis
Published
An Algebraic Framework for the Solution of Inverse Problems in Cyber-Physical Systems
Gugg, C., 2015
Research output: Thesis › Doctoral Thesis
Published
An Energy Production Technology Assessment for Small and Medium Sized Projects
Rabengruber, A., 2015
Research output: Thesis › Doctoral Thesis
Published
An Examination of the Effectiveness of Executive Compensation and Management Activities on the Performance of selected Oil and Gas Exploration and Production Companies listed on New York and Toronto Stock Exchanges
Langanger, H., 2022
Research output: Thesis › Doctoral Thesis
Published
An applicability assessment of excavation tools for small-scale mining robots
Berner, M., 2023
Research output: Thesis › Doctoral Thesis
Published
An assessment of underground hydrogen storage: Transport, geochemistry, and bioactivity
Hassannayebi, N., 2019
Research output: Thesis › Doctoral Thesis
Published
Analyse des Abscheideverhaltens in industriellen SO2-Sprühwäschern mit numerischer Strömungssimulation
Demuth, M. R., 2007, 140 p.
Research output: Thesis › Doctoral Thesis
Published
Analyse produktions- und anlagennaher Managementkonzepte nach funktionalen und organisationskulturellen Aspekten
Zielowski, C., 2005
Research output: Thesis › Doctoral Thesis
Published
Analysis of Drill String Dynamic Behavior
Esmaeili, A., 2013
Research output: Thesis › Doctoral Thesis
Published
Analysis of salt-bearing aqueous solutions in synthetic fluid inclusions by microthermometry and cryogenic Raman spectroscopy
Baumgartner, M., 2009
Research output: Thesis › Doctoral Thesis
Published
Analysis, Implementation and Investigation of a Wireless In-Mold Sensor for Injection Molding
Müller, F., 2014, 207 p.
Research output: Thesis › Doctoral Thesis
Published
Analytische Beschreibung eines Kompositmaterials bestehend aus dem Trägermaterial Klinoptilolith, dem Aktivstoff Calciumchlorid und Silan
Meitner, D., 2016
Research output: Thesis › Doctoral Thesis
Published
Analytische Methode zur Identifizierung des geographischen Ursprungs von Kürbiskernölen
Zettl, D., 2013, 135 p.
Research output: Thesis › Doctoral Thesis
Published
Angewandtes short- und medium-term Forecasting in Industrieunternehmen
Pichler, J. F., 2007, 269 p.
Research output: Thesis › Doctoral Thesis
Published
Ansätze zur Lebensdauerberechnung von kurzglasfaserverstärkten Polymeren
Guster, C., 2009
Research output: Thesis › Doctoral Thesis
Published
Anthropogenic versus geogenic contamination of the Vordernbergerbach valley, Steiermark, Austria: A geochemical, mineralogical and geophysical study
Irfan, M. I., 2012, 144 p.
Research output: Thesis › Doctoral Thesis
Published
Anticipating Strategic Risks by Fuzzy-based Scenario Monitoring on the Example of Oil Price Developments
Frieß, B. J., 2009
Research output: Thesis › Doctoral Thesis
Published
Application of Damage Tolerant Design in Mechanical Engineering
Jan, M. M., 2008, 103 p.
Research output: Thesis › Doctoral Thesis
Published
Application of Some Digital Techniques to Optimize the Thermomechanical Behavior of Refractory Linings
Hou, A., 2019
Research output: Thesis › Doctoral Thesis
Published
Application of Ultrasonic Waves in Advanced Oil and Gas Production
Kunanz, H., 2015
Research output: Thesis › Doctoral Thesis
Published
Application of a Smart High-Performance Wire Rope as a Continuous Sucker Rod String
Fazeli Tehrani, F., 2021
Research output: Thesis › Doctoral Thesis
Published
Application of an integrated life cycle assessment approach toward a carbon-neutral industry
Puschnigg, S. G., 2023
Research output: Thesis › Doctoral Thesis
Published
Application of the Recovery Curve Method to Petroleum Reservoir Material Balance Calculation
Gharsalla, M., 2015
Research output: Thesis › Doctoral Thesis
Published
Application of the configurational forces concept for the design of tough, strong and damage-tolerant composites
Sistaninia, M., 2017
Research output: Thesis › Doctoral Thesis
Published
Assessing Corporate Social Responsibility in Industrial Firms: the CSR-assessment
Ebner, D., 2008
Research output: Thesis › Doctoral Thesis
Published
Assessment of Glass Beads for Gravel Pack Application
Xu, Y., 2020
Research output: Thesis › Doctoral Thesis
Published
Atomic Force Microscopy investigations of fiber-fiber bonds in paper
Schmied, F., 2011, 114 p.
Research output: Thesis › Doctoral Thesis
Published
Atomic-Scale Study on Dopant- and Strain-Effects in Bismuth-Ferrite Thin Films
Haselmann, U., 2022
Research output: Thesis › Doctoral Thesis
Published
Atomic-scale characterization of severely deformed nanocrystalline alloys
Guo, J., 2018
Research output: Thesis › Doctoral Thesis
Published
Atomistic approaches for investigating planar defects in compositionally complex alloys
Gehringer, D., 2023
Research output: Thesis › Doctoral Thesis
Published
Aufarbeitung von Jarosit und Elektrolichtbogenofenstaub in einem kombinierten Verfahren zur Rückgewinnung von Wertmetallen
Wegscheider, S., 2018
Research output: Thesis › Doctoral Thesis
Published
Aufbereitung von synthetischem Kauster für den Einsatz in der Papier- und Zellstoffindustrie
Larissegger, S., 2020
Research output: Thesis › Doctoral Thesis
Published
Aufbereitungstechnische Ansätze in der Wiederverwertung von Zwischenprodukten aus der Kupfermetallurgie
Patscheider, S., 2018
Research output: Thesis › Doctoral Thesis
Published
Aufklärung der Verformungsvorgänge bei der Hochverformung
Hafok, M., 2007, 179 p.
Research output: Thesis › Doctoral Thesis
Published
Ausgestaltung einer dynamischen, lern- und wertschöpfungsorientierten Instandhaltung
Kinz, A., 29 Nov 2017, 205 p.
Research output: Thesis › Doctoral Thesis
Published
Ausgewählte fertigungstechnische Methoden zur Verbesserung des Stabilitätsverhaltens von Rechteckplatten
Figala, G., 2012, 161 p.
Research output: Thesis › Doctoral Thesis
Published
Ausscheidungshärtbarer Schneidwerkstoff mit Hartphasen
Turk, C., 2016
Research output: Thesis › Doctoral Thesis
Published
Austenite memory and spontaneous recrystallization and its influence on the martensitic substructure of a PH 15-5 steel during solution annealing
Brandl, D. C., 2019
Research output: Thesis › Doctoral Thesis
Published
Auswahl von Instrumenten und Methoden zur komplexitätsadäquaten Unterstützung von betrieblichen Entscheidungsprozessen in Gruppen
Staber, S., 2008
Research output: Thesis › Doctoral Thesis
Published
Automatic First Break Detection Using Support Vector Machines
Yalcinoglu, L., 2011
Research output: Thesis › Doctoral Thesis
Published
Automatic Scene Interpretation with Totally Occluded Objects
Antenreiter, M., 2017
Research output: Thesis › Doctoral Thesis
Published
Automotives Projekt- und Risikomanagement am Beispiel der Elektromobilität
Hafellner, M. P., 2016
Research output: Thesis › Doctoral Thesis
Published
BOF Cold Model: Mixing time study at multiphase conditions
Godinho de Carvalho, D. A., 2021
Research output: Thesis › Doctoral Thesis
Published
Bainitic reaction under continuous cooling conditions and tempering behaviour of a bainitic microstructure in a low alloyed steel
Reisinger, S., 2019
Research output: Thesis › Doctoral Thesis
Published
Basischarakterisierung von intermetallischen Titanaluminid-Legierungen für die Anwendung im Abgasturbolader
Lehner, A., 2015
Research output: Thesis › Doctoral Thesis
Published
Beckenentwicklung und Bildung von Kohleflözen und organisch-reichen Sedimenten am Beispiel des neogenen Lavanttaler Beckens
Groß, D., 2009
Research output: Thesis › Doctoral Thesis
Published
Beitrag zum Verständnis der Schwingungsrisskorrosion austenitischer Stähle
Vichytil, C., 2012
Research output: Thesis › Doctoral Thesis
Published
Beitrag zur Analyse des strukturdynamischen Verhaltens der Karosserie von Kraftfahrzeugen
Jalics, K., 2005
Research output: Thesis › Doctoral Thesis
Published
Beitrag zur Optimierung von Querstrom-Drehkorbsichtern
Streicher, C., 2013, 117 p.
Research output: Thesis › Doctoral Thesis
Published
Beitrag zur Optimierung von Zerkleinerungs- und Verschleißprozessen in der Holzaufbereitungstechnik
Pichler, P., 2018
Research output: Thesis › Doctoral Thesis
Published
Beitrag zur Simulation der thermomechanischen Ermüdung stabil erstarrter Eisengusswerkstoffe
Strohhäussl, B., 2016
Research output: Thesis › Doctoral Thesis
Published
Beiträge zur Bewertung der Schwingfestigkeit von ausferritischem Gusseisen mit Kugelgraphit
Wohlfahrt, M., 2013
Research output: Thesis › Doctoral Thesis

Previous 1 2 3 4 5 6 7 8 ...54 Next

Research Portal

Theses/Final papers

Advanced filters