Surface & coatings technology, ‎0257-8972

Journal

ISSNs0257-8972
Additional searchable ISSN (electronic)0257-8972
1 - 155 out of 155Page size: 500

Research output

  1. 2024
  2. Published

    Influence of multiple detection events on compositional accuracy of TiN coatings in atom probe tomography

    Schiester, M., Waldl, H., Hans, M., Thuvander, M., Primetzhofer, D., Schalk, N. & Tkadletz, M., 15 Feb 2024, In: Surface & coatings technology. 477.2024, 15 February, 11 p., 130318.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Ternary low-friction coatings on thermoplastics by plasma spraying: Investigations on the process-structure

    Kopp, D., Gleirscher, M., Stummer, M., Major, L., Hausberger, A., Schlögl, S., Lackner, J. M., Kaindl, R., Prethaler, T., Coclite, A. M. & Waldhauser, W., 15 Feb 2024, In: Surface and Coatings Technology. 477.2024, 15 February, 14 p., 130303.

    Research output: Contribution to journal › Article › Research › peer-review

  4. 2023
  5. Published

    Is it meaningful to quantify vacancy concentrations of nanolamellar (Ti,Al)N thin films based on laser-assisted atom probe data?

    Hans, M., Tkadletz, M., Primetzhofer, D., Waldl, H., Schiester, M., Bartosik, M., Czettl, C., Schalk, N., Mitterer, C. & Schneider, J. M., 25 Nov 2023, In: Surface & coatings technology. 473.2023, 25 November, 11 p., 130020.

    Research output: Contribution to journal › Article › Research › peer-review

  6. E-pub ahead of print

    In-situ X-ray diffraction study of the oxidation behavior of arc-evaporated TiAlSiN coatings with low Al contents

    Moritz, Y., Saringer, C., Tkadletz, M., Fian, A., Czettl, C., Pohler, M. & Schalk, N., 3 Nov 2023, (E-pub ahead of print) In: Surface & coatings technology. 475.2023, 25 December, 10 p., 130161.

    Research output: Contribution to journal › Article › Research › peer-review

  7. E-pub ahead of print

    Oxidation mechanism of sputter deposited model SiNx/TiN/SiNx coatings

    Moritz, Y., Kainz, C., Peritsch, P., Mitterer, C. & Schalk, N., 26 Jun 2023, (E-pub ahead of print) In: Surface and Coatings Technology. 468.2023, 15 September, 7 p., 129753.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Topography of high-speed steel substrates sputter cleaned by an Ar/Ti cathodic arc plasma

    Kampichler, J., Razumovskiy, V. I., Klünsner, T., Kholtobina, A., Brandstetter, F., Nahif, F. & Mitterer, C., 15 Apr 2023, In: Surface & coatings technology. 458.2023, 15 April, 10 p., 129344.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Thermal stability of MoNbTaTiW, MoNbTaVW and CrMoNbTaW thin films deposited by high power impulse magnetron sputtering

    Gruber, G., Lassnig, A., Žák, S., Gammer, C., Cordill, M. & Franz, R., 15 Feb 2023, In: Surface & coatings technology. 454.2023, 15 February, 7 p., 129189.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Investigation of the microstructure of a graded ZrN/Ti0.33Al0.67N multilayer coating using cross-sectional characterization methods

    Frank, F., Tkadletz, M., Saringer, C., Czettl, C., Pohler, M., Burghammer, M., Todt, J., Zalesak, J., Keckes, J. & Schalk, N., 25 Jan 2023, In: Surface & coatings technology. 453.2023, 25 January, 8 p., 129126.

    Research output: Contribution to journal › Article › Research › peer-review

  11. 2022
  12. E-pub ahead of print

    On the influence of the Cr/(Cr + Ta) ratio on the microstructure, mechanical properties and thermal stability of magnetron sputtered CrxTa1-xN coatings

    Kainz, C., Kölbl, L. & Schalk, N., 13 Sept 2022, (E-pub ahead of print) In: Surface & coatings technology. 447.2022, 15 October, p. 1-7 128877.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Tribological investigations of Mo films deposited on thin polyimide substrates

    Kobierska, E., Žák, S., Hirn, S., Cordill, M. J., Franz, R. & Rebelo de Figueiredo, M., 25 Jul 2022, In: Surface & coatings technology. 442-2022, 25 July, 11 p., 128549.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Evolution of the fracture properties of arc evaporated Ti1-xAlxN coatings with increasing Al content

    Waldl, H., Tkadletz, M., Lechner, A., Czettl, C., Pohler, M. & Schalk, N., 16 Jul 2022, In: Surface & coatings technology. 444.2022, 25 August, 6 p., 128690.

    Research output: Contribution to journal › Article › Research › peer-review

  15. E-pub ahead of print

    Influence of matrix composition and MC carbide content on damage behaviour of TiN-coated high speed steel due to cyclic shear and compression load

    Gsellmann, M., Klünsner, T., Mitterer, C., Marsoner, S., Leitner, H., Boumpakis, A., Skordaris, G., Maier-Kiener, V. & Ressel, G., 16 May 2022, (E-pub ahead of print) In: Surface & coatings technology. 442.2022, 25 July, 8 p., 128546.

    Research output: Contribution to journal › Article › Research › peer-review

  16. E-pub ahead of print

    Synthesis and structure of refractory high entropy alloy thin films based on the MoNbTaW system

    Gruber, G., Lassnig, A., Žák, S., Gammer, C., Cordill, M. J. & Franz, R., 22 Apr 2022, (E-pub ahead of print) In: Surface & coatings technology. 439.2022, 15 June, 10 p., 128446.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Influence of multilayer architecture on microstructure and fracture properties of arc evaporated TiAlTaN coatings

    Waldl, H., Tkadletz, M., Czettl, C., Pohler, M. & Schalk, N., 15 Mar 2022, In: Surface & coatings technology. 433.2022, 15 March, 7 p., 128098.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Microstructural and micro-mechanical investigation of cathodic arc evaporated ZrN/TiN multilayer coatings with varying bilayer thickness

    Frank, F., Kainz, C., Tkadletz, M., Czettl, C., Pohler, M. & Schalk, N., 25 Feb 2022, In: Surface & coatings technology. 432.2022, 25 February, 9 p., 128070.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Hard coatings for cutting applications: Physical vs. chemical vapor deposition and future challenges for the coatings community

    Schalk, N., Tkadletz, M. & Mitterer, C., 15 Jan 2022, In: Surface & coatings technology. 429.2022, 15 January, 30 p., 127949.

    Research output: Contribution to journal › Review article › peer-review

  20. 2021
  21. Published

    The influence of bias voltage on structure, thermal stability and mechanical properties of arc evaporated Cr0.69Ta0.20B0.11N coatings

    Kainz, C., Pohler, M., Tkadletz, M., Czettl, C. & Schalk, N., 25 Dec 2021, In: Surface & coatings technology. 428.2021, 25 December, 8 p., 127867.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Grain refinement effect on the Ti-45Nb alloy electrochemical behavior in simulated physiological solution

    Cvijović-Alagić, I., Laketić, S., Bajat, J., Hohenwarter, A. & Rakin, M., 15 Oct 2021, In: Surface and Coatings Technology. 423.2021, 15 October, 9 p., 127609.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Pressure- and temperature-dependent diffusion from first-principles: A case study of V and Ti in a TiN matrix

    Nayak, G. K., Popov, M. N. & Holec, D., 25 Sept 2021, In: Surface & coatings technology. 422.2021, 25 September, 10 p., 127491.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Cathode spot behavior in nitrogen and oxygen gaseous atmospheres and concomitant cathode surface modifications

    Golizadeh Najafabadi, M., Mendez Martin, F., Kolozsvári, S., Anders, A. & Franz, R., 15 Sept 2021, In: Surface & coatings technology. 421.2021, 15 September, 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Microstructure and mechanical properties of arc evaporated Ti(Al,Si)N coatings

    Moritz, Y., Kainz, C., Tkadletz, M., Czettl, C., Pohler, M. & Schalk, N., 15 Sept 2021, In: Surface & coatings technology. 421.2021, 15 September, 8 p., 127461.

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Influence of bias voltage on microstructure, mechanical properties and thermal stability of arc evaporated Cr0.74Ta0.26N coatings

    Kainz, C., Pohler, M., Gruber, G., Tkadletz, M., Ebner, A., Czettl, C. & Schalk, N., 15 Jul 2021, In: Surface & coatings technology. 417.2021, 15 July, 8 p., 127212.

    Research output: Contribution to journal › Article › Research › peer-review

  27. E-pub ahead of print

    Evolution of the microstructure of sputter deposited TaAlON thin films with increasing oxygen partial pressure

    Schalk, N., Saringer, C., Fian, A., Terziyska, V., Julin, J. & Tkadletz, M., 29 Apr 2021, (E-pub ahead of print) In: Surface & coatings technology. 418.2021, 25. July, 7 p., 127237.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    High temperature fracture toughness of single-layer CrAlN and CrAlSiN hard coatings

    Drnovsek, A., Vo, H., Rebelo de Figueiredo, M., Kolozsvári, S., Hosemann, P. & Franz, R., 15 Mar 2021, In: Surface & coatings technology. 409.2021, 15 March, 7 p., 126909.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Mechanical properties of single and polycrystalline α-Al2O3 coatings grown by chemical vapor deposition

    Konstantiniuk, F., Tkadletz, M., Kainz, C., Czettl, C. & Schalk, N., 11 Feb 2021, In: Surface & coatings technology. 410.2021, 25 March, p. 1-7 7 p., 126959.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Evolution of the thermal conductivity of arc evaporated fcc-Ti1-x-yAlxTayN coatings with increasing Ta content

    Waldl, H., Tkadletz, M., Winkler, M., Großmann, B., Czettl, C., Pohler, M. & Schalk, N., 25 Jan 2021, In: Surface & coatings technology. 2021, 406, 6 p., 126658.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    In-situ investigation of the oxidation behavior of powdered TiN, Ti(C,N) and TiC coatings grown by chemical vapor deposition

    Kainz, C., Schalk, N., Saringer, C. & Czettl, C., 25 Jan 2021, In: Surface & coatings technology. 406.2021, 25 January, 6 p., 126633.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Evolution of structure, residual stress, thermal stability and wear resistance of nanocrystalline multilayered Al0.7Cr0.3N-Al0.67Ti0.33N coatings

    Spor, S., Jäger, N., Meindlhumer, M., Hruby, H., Burghammer, M., Nahif, F., Mitterer, C., Keckes, J. & Daniel, R., 2021, In: Surface & coatings technology. 425.2021, 15 November, 9 p., 127712.

    Research output: Contribution to journal › Article › Research › peer-review

  33. 2020
  34. Published

    Oxidation behavior of arc evaporated TiSiN coatings investigated by in-situ synchrotron X-ray diffraction and HR-STEM

    Moritz, Y., Saringer, C., Tkadletz, M., Stark, A., Schell, N., Letofsky-Papst, I., Czettl, C., Pohler, M. & Schalk, N., 25 Dec 2020, In: Surface & coatings technology. 404.2020, 25 December, 9 p., 126632.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Microstructure, mechanical and thermo-physical properties of CVD TiCxN1-x coatings on cemented carbide substrates grown with C2H6 as C feeding precursor

    Kainz, C., Schalk, N., Tkadletz, M., Winkler, M. & Czettl, C., 25 Jul 2020, In: Surface & coatings technology. 394.2020, 25 July, 7 p., 125868.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Near-interface cracking in a TiN coated high speed steel due to combined shear and compression under cyclic impact loading

    Gsellmann, M., Klünsner, T., Mitterer, C., Marsoner, S., Skordaris, G., Bouzakis, K., Leitner, H. & Ressel, G., 25 Jul 2020, In: Surface & coatings technology. 394.2020, 25 July, 6 p., 125854.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Surface oxidation of nanocrystalline CVD TiB2 hard coatings revealed by cross-sectional nano-analytics and in-situ micro-cantilever testing

    Gruber, D. P., Zalesak, J., Todt, J., Tkadletz, M., Sartory, B., Suuronen, J. P., Ziegelwanger, T., Czettl, C., Mitterer, C. & Keckes, J., 20 Jul 2020, In: Surface and Coatings Technology. 399.2020, 15 October, 9 p., 126181.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Correlation between fracture characteristics and valence electron concentration of sputtered Hf-C-N based thin films

    Glechner, T., Lang, S., Hahn, R., Alfreider, M., Moraes, V., Primetzhofer, D., Ramm, J., Kolozsvári, S., Kiener, D. & Riedl, H., 19 Jul 2020, In: Surface and Coatings Technology. 399.2020, 15 October, 8 p., 126212.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Reactively sputtered TiN/SiO2 multilayer coatings with designed anisotropic thermal conductivity – From theoretical conceptualization to experimental validation

    Tkadletz, M., Lechner, A., Schalk, N., Sartory, B., Winkler, M. & Mitterer, C., 15 Jul 2020, In: Surface & coatings technology. 393.2020, 15 July, 9 p., 125763.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Multilayer coatings based on the combination of perfluorinated organosilanes and nickel films for injection moulding tools

    Calderon, J. C., Koch, L., Bandl, C., Kern, W., Jilg, J., Schilp, C., Moritzer, E. & Grundmeier, G., 8 Jul 2020, In: Surface & coatings technology. 399.2020, 15 October, 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Thermal crack formation in TiCN/α-Al2O3 bilayer coatings grown by thermal CVD on WC-Co substrates with varied Co content

    Stylianou, R. P., Velic, D., Daves, W., Ecker, W., Tkadletz, M., Schalk, N., Czettl, C. & Mitterer, C., 25 Jun 2020, In: Surface & coatings technology. 392.2020, 25 June, 11 p., 125687.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Extraordinary high-temperature behavior of electrically conductive Hf7B23Si22C6N40 ceramic film

    Zeman, P., Zuzjaková, Čerstvý, R., Houška, J., Shen, Y., Todt, J., Jiang, J., Daniel, R., Keckes, J., Meletis, E. I. & Vlček, J., 15 Jun 2020, In: Surface and Coatings Technology. 391.2020, 15 June, 8 p., 125686.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Thermo-physical properties of coatings in the Ti(B,N) system grown by chemical vapor deposition

    Kainz, C., Schalk, N., Tkadletz, M., Saringer, C., Winkler, M., Stark, A., Schell, N., Julin, J. & Czettl, C., 25 Feb 2020, In: Surface & coatings technology. 384.2020, 25 February, 9 p., 125318.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    The effect of chemical composition on the structure , chemistry and mechanical properties of magnetron sputtered W-B-C coatings : Modeling and experiments

    Mizaei, S., Alishahi, M., Souček, P., Ženíšek, J., Holec, D., Koutná, N., Buršíková, V., Stupavská, M., Zábranský, L., Burmeister, F., Blug, B., Czigány, Z., Balázsi, K., Mikšová, R. & Vašina, P., 15 Feb 2020, In: Surface & coatings technology. 383.2020, 15 February, 12 p., 125274.

    Research output: Contribution to journal › Article › Research › peer-review

  45. E-pub ahead of print

    Angular-dependent deposition of MoNbTaVW HEA thin films by three different physical vapor deposition methods

    Xia, A., Togni, A., Hirn, S., Bolelli, G., Lusvarghi, L. & Franz, R., 17 Jan 2020, (E-pub ahead of print) In: Surface & coatings technology. 385.2020, March, 8 p., 125356.

    Research output: Contribution to journal › Article › Research › peer-review

  46. 2019
  47. E-pub ahead of print

    Impact of V , Hf and Si on oxidation processes in Ti – Al – N : Insights from ab initio molecular dynamics

    Guo, F., Holec, D., Wang, J. & Du, Y., 5 Nov 2019, (E-pub ahead of print) In: Surface & coatings technology. 381.2020, 15 January, 10 p., 125125.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Microstructure and mechanical properties of CVD TiN/TiBN multilayer coatings

    Kainz, C., Schalk, N., Tkadletz, M., Mitterer, C. & Czettl, C., 25 Jul 2019, In: Surface & coatings technology. 370.2019, July, p. 311-319 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    In-situ investigation of the oxidation behavior of metastable CVD Ti1-xAlxN using a novel combination of synchrotron radiation XRD and DSC

    Saringer, C., Tkadletz, M., Stark, A., Schell, N., Czettl, C. & Schalk, N., 27 May 2019, In: Surface & coatings technology. 374.2019, 25 September, p. 617-624 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Correlating high temperature mechanical and tribological properties of CrAlN and CrAlSiN hard coatings

    Drnovšek, A., Vo, H., Xia, A., Vachhani, S. J., Kolozsvári, S., Hosemann, P., Franz, R. & Rebelo de Figueiredo, M., 17 May 2019, In: Surface & coatings technology. 372.2019, August, p. 361-368 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Effects of reference materials on texture coefficients determined for a CVD α-Al2O3 coating

    Stylianou, R. P., Tkadletz, M., Schalk, N., Penoy, M., Czettl, C. & Mitterer, C., 15 Feb 2019, In: Surface & coatings technology. 359.2019, February, p. 314-322 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Cyclic heat-up and damage-relevant substrate plastification of single- and bilayer coated milling inserts evaluated numerically

    Nemetz, A., Daves, W., Klünsner, T., Ecker, W., Schäfer, J., Czettl, C. & Antretter, T., 2019, In: Surface & coatings technology. 360.2019, February, p. 39-49 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    Shot peening-induced plastic deformation of individual phases within a coated WC-Co hard metal composite material including WC plastification

    Faksa, L., Daves, W., Klünsner, T., Maier, K., Antretter, T., Czettl, C. & Ecker, W., 2019, In: Surface & coatings technology. 380.2019, 25 December, 11 p., 125026.

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    The sputter performance of an industrial-scale planar Mo-target over ist lifetime: Target erosion and film properties

    Rausch, M., Sabag, A., Pichler, K-H., Gruber, G., Köstenbauer, J., Köstenbauer, H., Kreiml, P., Cordill, M. J., Winkler, J. & Mitterer, C., 2019, In: Surface & coatings technology. 381.2020, 15 January, 14 p., 125174.

    Research output: Contribution to journal › Article › Research › peer-review

  55. 2018
  56. E-pub ahead of print

    Evolution of microstructure and mechanical properties of a grades TiAlON thin film investigated by cross-sectional characterization techniques

    Schalk, N., Tkadletz, M., Terziyska, V., Deluca, M., Letofsky-Papst, I., Keckes, J. & Mitterer, C., 14 Dec 2018, (E-pub ahead of print) In: Surface & coatings technology. 315.2019, February, p. 155-161 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  57. E-pub ahead of print

    Theory-guided metal-decoration of nanoporous carbon for hydrogen storage applications

    Holec, D., Kostoglou, N., Tampaxis, C., Babic, B., Mitterer, C. & Rebholz, C., 26 Jul 2018, (E-pub ahead of print) In: Surface & coatings technology. 351.2018, 15 October, p. 42-49 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  58. E-pub ahead of print

    Molecularly grafted, structurally integrated multifunctional polymer thin films with improved adhesion

    Lassnig, A., Nakamura, N., Jörg, T., Reeja-Jayan, B. & Cordill, M., 28 Jun 2018, (E-pub ahead of print) In: Surface & coatings technology. 349.2018, 15 September, p. 963-968 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  59. E-pub ahead of print

    Atomic scale investigations of thermally treated nano-structured Ti-Al-N/Mo-Si-B multilayers

    Aschauer, E., Sackl, S. C., Schachinger, T., Bolvardi, H., Arndt, M., Polcik, P., Riedl, H. & Mayrhofer, P. H., 18 Jun 2018, (E-pub ahead of print) In: Surface & coatings technology. 349.2018, September, p. 480-487 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  60. Published

    High-temperature tribology and oxidation of Ti1-x-γAlxTaγN hard coatings

    Großmann, B., Tkadletz, M., Schalk, N., Czettl, C., Pohler, M. & Mitterer, C., 2018, In: Surface & coatings technology. p. 190-197

    Research output: Contribution to journal › Article › Research › peer-review

  61. Published

    Linking erosion and sputter performance of a rotatable Mo target to microstructure and properties of the deposited thin films

    Hofer-Roblyek, A. M., Pichler, K-H., Linke, C., Franz, R., Winkler, J. & Mitterer, C., 2018, In: Surface & coatings technology. p. 354-359

    Research output: Contribution to journal › Article › Research › peer-review

  62. Published

    Needle grass array of nanostructured nickel cobalt sulfide electrode for clean energy generation

    Zequine, C., Bhoyate, S., Siam, K., Kahol, P. K., Kostoglou, N., Mitterer, C., Hinder, S., Baker, M., Constantinides, G., Rebholz, C., Gupta, G., Li, X. & Gupta, R. K., 2018, In: Surface & coatings technology. p. 306-312

    Research output: Contribution to journal › Article › Research › peer-review

  63. 2017
  64. E-pub ahead of print

    Interface-induced electronic structure toughening of nitride superlatices

    Rehák, P., Cerny, M. & Holec, D., 25 Sept 2017, (E-pub ahead of print) In: Surface & coatings technology. 325.2017, September, p. 410-416 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  65. E-pub ahead of print

    Annealing effects on the film stress and adhesion of tungsten-titanium barrier layers

    Kleinbichler, A., Todt, J., Zechner, J., Wöhlert, S., Többens, D. & Cordill, M., 18 Sept 2017, (E-pub ahead of print) In: Surface & coatings technology. 332.2017, 25 December, p. 376-381 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  66. Published

    Combined TEM and XPS studies of metal - polymer interfaces for space applications

    Putz, B., Milassin, G., Butenko, Y., Völker, B., Gammer, C., Semprimoschnig, C. & Cordill, M., 18 Sept 2017, In: Surface & coatings technology. 332.2017, 25 December, p. 368-375 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  67. E-pub ahead of print

    Non-reactive dc magnetron sputter deposition of Mo-O thin films from ceramic MoOx targets

    Pachlhofer, J., Martin-Luengo, A. T., Franz, R., Franzke, E., Köstenbauer, H., Winkler, J., Bonanni, A., Mitterer, S. & Mitterer, C., 18 Sept 2017, (E-pub ahead of print) In: Surface & coatings technology. 332.2017, 25 December, p. 80-85 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  68. E-pub ahead of print

    Thermal stability and oxidation resistance of sputtered Ti-Al-Cr-N hard coatings

    Xu, Y. X., Riedl, H., Holec, D., Chen, L., Du, Y. & Mayrhofer, P. H., 20 May 2017, (E-pub ahead of print) In: Surface & coatings technology. 324.2017, 15 September, p. 48-56 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  69. Published

    Non-reactively sputtered ultra-high temperature Hf-C and Ta-C coatings

    Lasfargues, H., Glechner, T., Koller, C., Paneta, V., Primetzhofer, D., Kolozsvari, S., Holec, D., Riedl, H. & Mayrhofer, P. H., 2017, In: Surface & coatings technology. 309.2017, 15 January, p. 436-444 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  70. Published

    Phase composition and thermal stability of arc evaporated Ti1 − xAlxN hard coatings with 0.4 ≤ x ≤ 0.67

    Großmann, B., Schalk, N., Czettl, C., Pohler, M. & Mitterer, C., 2017, In: Surface & coatings technology. 309.2017, 15 January, p. 687-693 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  71. Published

    Vacancy-driven extended stability of cubic metastable Ta-Al-N and Nb-Al-N phases

    Pacher, F., Mayrhofer, P. H. & Holec, D., 2017, In: Surface & coatings technology. 326.2017, 15 October, Part A, p. 37-44 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  72. Published

    Wear and fatigue resistance of mild steel components reinforced by arc welded hard layers

    Leitner, M., Pichler, P., Steinwender, F. & Guster, C., 2017, In: Surface & coatings technology. 330.2017, 1 December, p. 140-148 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  73. 2016
  74. Published

    Correlative microstructure and topography informed nanoindentation of copper films

    Bigl, S., Schöberl, T., Wurster, S., Cordill, M. & Kiener, D., 25 Dec 2016, In: Surface & coatings technology. 308.2016, 25 December, p. 404-413 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  75. E-pub ahead of print

    Electrochemical deposition of hydroxyapatite on beta-Ti-40Nb

    Schmidt, R., Hoffmann, V., Helth, A., Gostin, P. F., Calin, M., Eckert, J. & Gebert, A., 26 Mar 2016, (E-pub ahead of print) In: Surface & coatings technology. 294.2016, 25 May, p. 186-193 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  76. Published

    Advanced characterization methods for wear resistant hard coatings: A review on recent progress

    Tkadletz, M., Schalk, N., Daniel, R., Keckes, J., Czettl, C. & Mitterer, C., 2016, In: Surface & coatings technology. 285, p. 31-46 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  77. Published

    Al-rich cubic Al0.8Ti0.2N coating with self-organized nano-lamellar microstructure: Thermal and mechanical properties

    Todt, J., Zalesak, J., Daniel, R., Pitonak, R., Köpf, A., Weißenbacher, R., Sartory, B., Mitterer, C. & Keckes, J., 2016, In: Surface & coatings technology. 291, p. 89-93 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  78. Published

    Energy consumption and material fluxes in hard coating deposition processes

    Gassner, M., Rebelo De Figueiredo, M., Schalk, N., Franz, R., Weiß, C., Rudigier, H., Holzschuh, H., Bürgin, W., Pohler, M., Czettl, C. & Mitterer, C., 2016, In: Surface & coatings technology. 299, p. 49-55 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  79. Published

    Finite element study of the influence of hard coatings on hard metal tool loading during milling

    Krajinovic, I., Daves, W., Tkadletz, M., Teppernegg, T., Klünsner, T., Schalk, N., Mitterer, C., Tritremmel, C., Ecker, W. & Czettl, C., 2016, In: Surface & coatings technology. 304, p. 134-141 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  80. 2015
  81. Published

    Restrictions of stress measurements using the curvature method by thermally induced plastic deformation of silicon substrates

    Saringer, C., Tkadletz, M. & Mitterer, C., 25 Jul 2015, In: Surface & coatings technology. 274, p. 68-75 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  82. Published

    Element- and charge-state-resolved ion energies in the cathodic arc plasma from composite AlCr cathodes in argon, nitrogen and oxygen atmospheres

    Franz, R., Polcik, P. & Anders, A., 2015, In: Surface & coatings technology. 272, p. 309-321

    Research output: Contribution to journal › Article › Research › peer-review

  83. Published

    Influence of pulsed bias duty cycle variations on structural and mechanical properties of arc evaporated (Al,Cr)2O3 coatings

    Pohler, M., Franz, R., Ramm, J., Polcik, P. & Mitterer, C., 2015, In: Surface & coatings technology. 282, p. 43-51

    Research output: Contribution to journal › Article › Research › peer-review

  84. Published

    Residual stress gradients in alpha-Al2O3 hard coatings determined by pencil-beam X-ray nanodiffraction: The influence of blasting media

    Tkadletz, M., Keckes, J., Schalk, N., Krajinovic, I., Burghammer, M., Czettl, C. & Mitterer, C., 2015, In: Surface & coatings technology. 262, p. 134-140

    Research output: Contribution to journal › Article › Research › peer-review

  85. Published

    Residual stress gradients in α-Al2O3 hard coatings determined by pencil-beam X-ray nanodiffraction: The influence of blasting media

    Tkadletz, M., Keckes, J., Schalk, N., Krajinovic, I., Burghammer, M., Czettl, C. & Mitterer, C., 2015, In: Surface & coatings technology. 262, p. 134 - 140 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  86. 2014
  87. Published

    A combinatorial X-ray sub-micron diffraction study of microstructure, residual stress and phase stability in TiAlN coatings

    Riedl, A., Daniel, R., Todt, J., Steffenelli, M., Holec, D., Sartory, B., Krywka, C., Müller, M., Mitterer, C. & Keckes, J., 2014, In: Surface & coatings technology. 257, p. 108-113

    Research output: Contribution to journal › Article › Research › peer-review

  88. Published

    Crossover of texture and morphylogy in (Ti1-xAlx)1 - yYyN alloy films and the pathway of structure evolution

    Szekely, L., Safran, G., Kis, V., Horvat, Z. E., Mayrhofer, P. H., Moser, M., Radnoczi, G., Misjak, F. & Barna, P. B., 2014, In: Surface & coatings technology. 257, p. 3-14

    Research output: Contribution to journal › Article › Research › peer-review

  89. Published

    Increased thermal stability of Ti1-xAlxN/TiN multilayer coatings through high temperature sputter deposition on powder-metallurgical high-speed steels

    Weirather, T., Chladil, K., Sartory, B., Caliskanoglu, D., Cremer, R., Kölker, W. & Mitterer, C., 2014, In: Surface & coatings technology. 257, p. 48-57

    Research output: Contribution to journal › Article › Research › peer-review

  90. Published

    Investigation of the origin of compressive residual stress in CVD TiB2 hard coatings using synchrotron X-ray nanodiffraction

    Schalk, N., Keckes, J., Czettl, C., Burghammer, M., Penoy, M., Michotte, C. & Mitterer, C., 2014, In: Surface & coatings technology. 258, p. 121-126

    Research output: Contribution to journal › Article › Research › peer-review

  91. Published

    Mechanical and tribological properties of Al - Ti - N/Al - Cr - B -N multilayer films synthesized by cathodic arc evaporation

    Tritremmel, C., Daniel, R., Rudigier, H., Pocik, P. & Mitterer, C., 2014, In: Surface & coatings technology. 246, p. 57-63

    Research output: Contribution to journal › Article › Research › peer-review

  92. Published

    Mechanisms of topography formation of magnetron-sputtered chromium-based coatings on epoxy polymer composites

    Lackner, J. M., Waldhauser, W., Ganser, C., Teichert, C., Kot, M. & Major, L., 2014, In: Surface & coatings technology. 241, p. 80-85

    Research output: Contribution to journal › Article › Research › peer-review

  93. Published

    Origin of high temperature oxidation resistance of Ti-Al-Ta-N coatings

    Hollerweger, R., Riedl, H., Paulitsch, J., Arndt, M., Rachbauer, R., Polcik, P., Primig, S. & Mayrhofer, P. H., 2014, In: Surface & coatings technology. 257, p. 78-86

    Research output: Contribution to journal › Article › Research › peer-review

  94. Published

    Structural and mechanical evolution of reactively and non-reactively sputterd Zr-Al-N thin films during annealing

    Mayrhofer, P. H., Sonnleitner, D., Bartosik, M. & Holec, D., 2014, In: Surface & coatings technology. 244, p. 52-56

    Research output: Contribution to journal › Article › Research › peer-review

  95. Published

    Superior oxidation resistance, mechanical properties and residual stresses of an Al-rich nanolamellar Ti0.05Al0.95N coating prepared by CVD

    Todt, J., Pitonak, R., Köpf, A., Weißenbacher, R., Sartory, B., Burghammer, M., Daniel, R., Schöberl, T. & Keckes, J., 2014, In: Surface & coatings technology. 258.2014, November, p. 1119-1127

    Research output: Contribution to journal › Article › Research › peer-review

  96. Published

    The effect of droplets in arc evaporated TiAlTaN hard coatings on the wear behavior

    Tkadletz, M., Mitterer, C., Sartory, B., Letovsky-Papst, I., Czettl, C. & Michotte, C., 2014, In: Surface & coatings technology. 257, p. 95-101

    Research output: Contribution to journal › Article › Research › peer-review

  97. 2013
  98. Published

    C2H6 as precursor for low pressure chemical vapor deposition of TiCNB hard coatings

    Czettl, C., Mitterer, C., Penoy, M., Michotte, C. & Kathrein, M., 2013, In: Surface & coatings technology. 215, p. 127-132

    Research output: Contribution to journal › Article › Research › peer-review

  99. Published

    Industrial-scale sputter deposition of Cr1-xAlxN coatings with 0.21<x <0.74 from segmented targets

    Weirather, T., Czettl, C., Polcik, P., Kathrein, M. & Mitterer, C., 2013, In: Surface & coatings technology. 232, p. 303-310

    Research output: Contribution to journal › Article › Research › peer-review

  100. Published

    Influence of Fe impurities on structure and properties of arc-evaporated AlCrN coatings

    Mühlbacher, M., Franz, R., Paulitsch, J., Rudigier, H., Polcik, P., Mayrhofer, P. H. & Mitterer, C., 2013, In: Surface & coatings technology. 215, p. 96-103

    Research output: Contribution to journal › Article › Research › peer-review

  101. Published

    Phase stability, mechanical properties and thermal stability of Y alloyed Ti-Al-N coatings

    Riedl, H., Holec, D., Rachbauer, R., Polcik, P., Hollerweger, R., Paulitsch, J. & Mayrhofer, P. H., 2013, In: Surface & coatings technology. 235, p. 174-180

    Research output: Contribution to journal › Article › Research › peer-review

  102. Published

    V-alloyed ZrO2 coatings with temperature homogenization function for high-temperature sliding contacts

    Jantschner, O., Walter, C., Muratore, C., Voevodin, A. A. & Mitterer, C., 2013, In: Surface & coatings technology. 228, p. 76-83

    Research output: Contribution to journal › Article › Research › peer-review

  103. Published

    Vanadium containing self-adaptive low-friction hard coatings for high-temperature applications: a review

    Franz, R. & Mitterer, C., 2013, In: Surface & coatings technology. 228, p. 1-13

    Research output: Contribution to journal › Article › Research › peer-review

  104. 2012
  105. Published

    Carbon doped alpha-Al2O3 coatings grown by chemical vapor deposition

    Hochauer, D., Mitterer, C., Penoy, M., Puchner, S., Michotte, C., Martinz, H. P., Hutter, H. & Kathrein, M., 2012, In: Surface & coatings technology. 206, p. 4771-4777

    Research output: Contribution to journal › Article › Research › peer-review

  106. Published

    Duplex processing for increased adhesion of sputter deposited Ti1-xAlxN coatings on a Fe-25%Co-15%Mo tool material

    Weirather, T., Fian, A., Sartory, B., Caliskanoglu, D., Kölker, W. & Mitterer, C., 2012, In: Surface & coatings technology. 206, p. 3601-3606

    Research output: Contribution to journal › Article › Research › peer-review

  107. Published

    Effect of Hf on structure and age hardening of Ti-Al-N thin films

    Rachbauer, R., Blutmager, A., Holec, D. & Mayrhofer, P. H., 2012, In: Surface & coatings technology. 206, p. 2667-2672

    Research output: Contribution to journal › Article › Research › peer-review

  108. Published

    Increased thermal stability of Ti-Al-N thin films by Ta alloying

    Rachbauer, R., Holec, D. & Mayrhofer, P. H., 2012, In: Surface & coatings technology. 211, p. 98-103

    Research output: Contribution to journal › Article › Research › peer-review

  109. Published

    Influence of residual stresses and grain size on the spinodal decomposition of metastable Ti1-xAlxN coatings

    Schalk, N., Mitterer, C., Keckes, J., Penoy, M. & Michotte, C., 2012, In: Surface & coatings technology. 209, p. 190-196

    Research output: Contribution to journal › Article › Research › peer-review

  110. Published

    Lateral gradients of phases, residual stress and hardness in a laser heated Ti0.52Al0.48N coating on hard metal

    Bartosik, M., Daniel, R., Zhang, Z., Deluca, M., Ecker, W., Steffenelli, M., Klaus, M., Genzel, C., Stefenelli, M., Mitterer, C. & Keckes, J., 2012, In: Surface & coatings technology. 206, p. 4502-4510 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  111. Published

    Microstructure and mechanical properties of nanocrystalline Al-Cr-B-N thin films

    Tritremmel, C., Daniel, R., Lechthaler, M., Rudigier, H., Polcik, P. & Mitterer, C., 2012, In: Surface & coatings technology. 213, p. 1-7

    Research output: Contribution to journal › Article › Research › peer-review

  112. Published

    Microstructure modifications of CrN coatings by pulsed bias sputtering

    Grasser, S., Daniel, R. & Mitterer, C., 2012, In: Surface & coatings technology. 206, p. 4666-4671

    Research output: Contribution to journal › Article › Research › peer-review

  113. Published

    Oxidation behaviour and tribological properties of arc-evaporated ZrAlN hard coatings

    Franz, R., Lechthaler, M., Polcik, P. & Mitterer, C., 2012, In: Surface & coatings technology. 206, p. 2337-2345

    Research output: Contribution to journal › Article › Research › peer-review

  114. Published

    Thermal stability and oxidation resistance of Ti-Al-N coatings

    Chen, L., Paulitsch, J., Du, Y. & Mayrhofer, P. H., 2012, In: Surface & coatings technology. 206, p. 2954-2960

    Research output: Contribution to journal › Article › Research › peer-review

  115. 2011
  116. Published

    A comparative study on Ti1-xAlxN coatings reactively sputtered from compound and from mosaic targets

    Schalk, N., Weirather, T., Polzer, C., Polcik, P. & Mitterer, C., 2011, In: Surface & coatings technology. 205, p. 4705-4710

    Research output: Contribution to journal › Article › Research › peer-review

  117. Published

    CO addition in low-pressure chemical vapour deposition of medium-temperature TiCxN1-x based hard coatings

    Czettl, C., Mitterer, C., Mühle, U., Rafaja, D., Puchner, S., Hutter, H., Penoy, M., Michotte, C. & Kathrein, M., 2011, In: Surface & coatings technology. 206, p. 1691-1697

    Research output: Contribution to journal › Article › Research › peer-review

  118. Published

    Cathodic arc deposition of (Al,Cr)2O3: Macroparticles and cathode surface modifications

    Pohler, M., Franz, R., Ramm, J., Polic, P. & Mitterer, C., 2011, In: Surface & coatings technology. 206, p. 1454-1460

    Research output: Contribution to journal › Article › Research › peer-review

  119. Published

    Composition, microstructure and mechanical properties of boron containing multilayer coatings for hot forming tools

    Paschke, H., Stüber, M., Ziebert, C., Bistron, M. & Mayrhofer, P. H., 2011, In: Surface & coatings technology. 205, p. 24-28

    Research output: Contribution to journal › Article › Research › peer-review

  120. Published

    Microstructure-property relations of reactively magnetron sputtered VCxNy films

    Mitterer, C., Fateh, N. & Munnik, F., 2011, In: Surface & coatings technology. p. 3805-3809

    Research output: Contribution to journal › Article › Research › peer-review

  121. Published

    Phase stability and alloy-related trends in Ti-Al-N, Zr-Al-N and Hf-Al-N systems from first principles

    Holec, D., Rachbauer, R., Chen, L., Wang, L., Luef, D. & Mayrhofer, P. H., 2011, In: Surface & coatings technology. 206, p. 1698-1704

    Research output: Contribution to journal › Article › Research › peer-review

  122. Published

    The effect of film thickness variations in peridic cracking: Analysis and experiments

    Taylor, A. A., Edlmayr, V., Cordill, M. & Dehm, G., 2011, In: Surface & coatings technology. 206, p. 1830-1836

    Research output: Contribution to journal › Article › Research › peer-review

  123. Published

    The effect of temperature and strain rate on the periodic cracking of amorphous AlxOy films on Cu

    Taylor, A. A., Edlmayr, V., Cordill, M. & Dehm, G., 2011, In: Surface & coatings technology. 206, p. 1855-1859

    Research output: Contribution to journal › Article › Research › peer-review

  124. 2010
  125. Published

    Atom probe specimen preparation and 3D interfacial study of Ti-Al-N thin films

    Rachbauer, R., Massl, S., Stergar, E., Felfer, P. & Mayrhofer, P. H., 2010, In: Surface & coatings technology. 204, p. 1811-1816

    Research output: Contribution to journal › Article › Research › peer-review

  126. Published

    Structure, mechanical properties and oxidation behaviour of arc-evaporated NbAlN hard coatings

    Franz, R., Lechthaler, M., Polzer, C. & Mitterer, C., 2010, In: Surface & coatings technology. 204, p. 2447-2453

    Research output: Contribution to journal › Article › Research › peer-review

  127. Published

    Structure-property relations in ZrCN coatings for tribological applications

    Silva, E., Rebelo De Figueiredo, M., Franz, R., Escobar Galindo, R., Palacio, C., Espinosa, A., Calderon, S., Mitterer, C. & Carvalho, S., 2010, In: Surface & coatings technology. 205, p. 2134-2141

    Research output: Contribution to journal › Article › Research › peer-review

  128. Published

    Thermal stability of sputtered Al2O3 coatings

    Edlmayr, V., Moser, M., Walter, C. & Mitterer, C., 2010, In: Surface & coatings technology. 204, p. 1576-1581

    Research output: Contribution to journal › Article › Research › peer-review

  129. Published

    Thermally-induced formation of hexagonal AlN in AlCrN hard coatings on sapphire: Orientation relationships and residual stresses

    Bartosik, M., Daniel, R., Mitterer, C. & Keckes, J., 2010, In: Surface & coatings technology. 205, p. 1320-1323

    Research output: Contribution to journal › Article › Research › peer-review

  130. Published

    Thernal stability of doped CVD K-Al2O3 coatings

    Hochauer, D., Mitterer, C., Penoy, M., Michotte, C., Martinz, H-P. & Kathrein, M., 2010, In: Surface & coatings technology. 204, p. 3713-3722

    Research output: Contribution to journal › Article › Research › peer-review

  131. 2009
  132. Published

    3D versus 2D finite element simulation of the effect of surface roughness on nanoindentation of hard coatings

    Walter, C. & Mitterer, C., 2009, In: Surface & coatings technology. 203, p. 3286-3290

    Research output: Contribution to journal › Article › Research › peer-review

  133. Published

    Improved oxidation resistance of TiAlN coatings by doping with Si or B

    Pfeiler, M., Zechner, J., Penoy, M., Michotte, C., Mitterer, C. & Kathrein, M., 2009, In: Surface & coatings technology. 203, p. 3104-3110

    Research output: Contribution to journal › Article › Research › peer-review

  134. Published

    Influence of phase transition on the tribological performance of arc-evaporated AlCrVN hard coatings

    Franz, R., Neidhardt, J., Kaindl, R., Sartory, B., Tessadri, R., Lechthaler, M., Polcik, P. & Mitterer, C., 2009, In: Surface & coatings technology. 203, p. 1101-1105

    Research output: Contribution to journal › Article › Research › peer-review

  135. Published

    Interface fracture properties of thin films studied by using the micro-cantilever deflection technique

    Matoy, K., Detzel, T., Müller, M., Motz, C. & Dehm, G., 2009, In: Surface & coatings technology. 204, p. 878-881

    Research output: Contribution to journal › Article › Research › peer-review

  136. Published

    The nanostructure wear and corrosion performance of arc-evaporated CrBxNy nanocomposite coatings

    Polychronopoulou, K., Baker, M. A., Rebholz, C., Neidhardt, J., O 'Sullivan, M., Reiter, A., Kanakis, K., Leyland, A., Matthews, A. & Mitterer, C., 2009, In: Surface & coatings technology. p. 246-255

    Research output: Contribution to journal › Article › Research › peer-review

  137. 2008
  138. Published

    Effect of nitrogen-incorporation on structure, properties and performance of magnetron sputtered CrB2

    Budna, K., Mayrhofer, P. H., Neidhardt, J., Hegedus, E., Kovacs, I., Toth, L., Pecz, B. & Mitterer, C., 2008, In: Surface & coatings technology. 202, p. 3088-3093

    Research output: Contribution to journal › Article › Research › peer-review

  139. Published

    Influence of bipolar pulsed DC magnetron sputtering on elemental composition and micro-structure of Ti-Al-Y-N thin films

    Moser, M., Mayrhofer, P. H., Székely, L., Sáfrán, G. & Barna, P. B., 2008, In: Surface & coatings technology. 203, p. 148-155

    Research output: Contribution to journal › Article › Research › peer-review

  140. Published

    Structure and phase evolution of Cr-Al-N coatings during annealing

    Mayrhofer, P. H., Willmann, H. & Reiter, A. E., 2008, In: Surface & coatings technology. 202, p. 4935-4938

    Research output: Contribution to journal › Article › Research › peer-review

  141. Published

    Structure-property relations of arc-evaporated Al-Cr-Si-N coatings

    Soldan, J., Neidhardt, J., Sartory, B., Kaindl, R., Cerstvy, R., Mayrhofer, P. H., Tessadri, R., Polcik, P., Lechthaler, M. & Mitterer, C., 2008, In: Surface & coatings technology. 202, p. 3555-3562

    Research output: Contribution to journal › Article › Research › peer-review

  142. Published

    Synthesis-structure relations for reactive magnetron sputtered V2O5 films

    Fateh, N., Fontalvo, G., Cha, L., Klünsner, T., Hlawacek, G., Teichert, C. & Mitterer, C., 2008, In: Surface & coatings technology. 202, p. 1551-1555

    Research output: Contribution to journal › Article › Research › peer-review

  143. Published

    The effect of yttrium incorporation on the oxidation resistance of Cr-Al-N coatings

    Rovere, F., Mayrhofer, P. H., Reinholdt, A., Mayer, J. & Schneider, J. M., 2008, In: Surface & coatings technology. 202, p. 5870-5875

    Research output: Contribution to journal › Article › Research › peer-review

  144. Published

    The influence of age-hardening on turning and milling performance of Ti–Al–N coated inserts

    Chen, L., Du, Y., Mayrhofer, P. H., Wang, S. Q. & Li, J., 2008, In: Surface & coatings technology. 202, p. 5158-5161

    Research output: Contribution to journal › Article › Research › peer-review

  145. Published

    Titanium doped CVD alumina coatings

    Hochauer, D., Mitterer, C., Penoy, M., Michotte, C., Martinz, H-P. & Kathrein, M., 2008, In: Surface & coatings technology. 203, p. 350-356

    Research output: Contribution to journal › Article › Research › peer-review

  146. 2007
  147. Published

    Annealing of intrinsic stresses in sputtered TiN films: The role of thickness-dependent gradients of point defect density

    Köstenbauer, H., Fontalvo, G., Kapp, M., Keckes, J. & Mitterer, C., 2007, In: Surface & coatings technology. 201, p. 4777-4780

    Research output: Contribution to journal › Article › Research › peer-review

  148. Published

    Finite Element Simulation of the Effect of surface roughness on nanoindentation of thin films with spherical indenters

    Walter, C., Antretter, T., Daniel, R. & Mitterer, C., 2007, In: Surface & coatings technology. 202, p. 1103-1107

    Research output: Contribution to journal › Article › Research › peer-review

  149. Published

    Hard and superhard TiAlBN coatings deposited by twin electron-beam evaporation

    Rebholz, C., Monclus, M. A., Baker, M. A., Mayrhofer, P. H., Gibson, P. N., Leyland, A. & Matthews, A., 2007, In: Surface & coatings technology. 13, p. 6078-6083

    Research output: Contribution to journal › Article › Research › peer-review

  150. Published

    High-temperature tribological behavior of sputtered NbNx thin films

    Fontalvo, G., Terziyska, V. & Mitterer, C., 2007, In: Surface & coatings technology. 202, p. 1017-1022

    Research output: Contribution to journal › Article › Research › peer-review

  151. Published

    The influence of bias voltage on structure and mechanical/tribological properties of arc evaporated Ti-Al-V-N coatings

    Pfeiler, M., Kutschej, K., Penoy, M., Michotte, C., Mitterer, C. & Kathrein, M., 2007, In: Surface & coatings technology. 202, p. 1050-1054

    Research output: Contribution to journal › Article › Research › peer-review

  152. Published

    Thermal stability of superhard Ti-B-N coatings

    Mayrhofer, P. H. & Stoiber, M., 2007, In: Surface & coatings technology. 201, p. 6148-6153

    Research output: Contribution to journal › Article › Research › peer-review

  153. 2006
  154. Published

    Crystallographic aspects related to advanced tribological multilayers of Cr/CrN and Ti/TiN types produced by pulsed laser deposition (PLD)

    Major, L., Morgiel, J., Major, B., Lackner, J. M., Waldhauser, W., Ebner, R., Nistor, L. & Van Tendeloo, G., 2006, In: Surface & coatings technology. 200, p. 6190-6195

    Research output: Contribution to journal › Article › Research › peer-review

  155. Published

    High-temperature oxidation resistance of Ta-Si-N films with a high Si content

    Zeman, P., Musil, J. & Daniel, R., 2006, In: Surface & coatings technology.

    Research output: Contribution to journal › Article › Research › peer-review

  156. Published

    Magnéli phase formation of PVD Mo-N and W-N coatings

    Gassner, G., Mayrhofer, P. H., Kutschej, K., Mitterer, C. & Kathrein, M., 2006, In: Surface & coatings technology. 201, p. 3335-3341

    Research output: Contribution to journal › Article › Research › peer-review

  157. Published

    Properties of reactively sputtered W-Si-N films

    Musil, J., Daniel, R., Soldán, J. & Zeman, P., 2006, In: Surface & coatings technology.

    Research output: Contribution to journal › Article › Research › peer-review

  158. Published

    The influence of boron content on the tribological performance of Ti-N-B coatings prepared by thermal CVD

    Wagner, J., Hochauer, D., Mitterer, C., Penoy, M., Michotte, C., Wallgram, W. & Kathrein, M., 2006, In: Surface & coatings technology. 201, p. 4247-4252

    Research output: Contribution to journal › Article › Research › peer-review

  159. Published

    Thermal stability of magnetron sputtered Zr–Si–N films

    Daniel, R., Musil, J., Zeman, P. & Mitterer, C., 2006, In: Surface & coatings technology. 201, p. 3368-3376

    Research output: Contribution to journal › Article › Research › peer-review

  160. Published

    tructure-property-performance relations of high-rate reactive arc-evaporated Ti-B-N nanocomposite coatings

    Neidhardt, J., Sullivan, M. O., Reiter, A. E., Rechberger, W., Grogger, W. & Mitterer, C., 2006, In: Surface & coatings technology. 201, p. 2553-2559

    Research output: Contribution to journal › Article › Research › peer-review

  161. 2005
  162. Published

    Comparative study of Ti1-xAlxN coatings alloyed with Hf, Nb, and B

    Kutschej, K., Fateh, N., Mayrhofer, P., Kathrein, M., Polcik, P. & Mitterer, C., 2005, In: Surface & coatings technology. 200, p. 113-117

    Research output: Contribution to journal › Article › Research › peer-review

  163. Published

    Influence of hydrogen sulfide addition on the alumina deposition by plasma CVD

    Fink, M., Laimer, J., Störi, H. & Mitterer, C., 2005, In: Surface & coatings technology. 200, p. 360-363

    Research output: Contribution to journal › Article › Research › peer-review

  164. Published

    Influence of oxide phase formation on the tribological behaviour of Ti-Al-V-N coatings

    Kutschej, K., Mayrhofer, P., Kathrein, M., Polcik, P. & Mitterer, C., 2005, In: Surface & coatings technology. 200, p. 1731-1737

    Research output: Contribution to journal › Article › Research › peer-review

  165. Published

    Influences of the nitrogen content on the morphological, chemical and optical properies of pulsed laser deposited silicon nitride thin films

    Lackner, J., Waldhauser, W., Berghauser, R., Ebner, R., Beutl, M., Jakopic, G., Leising, G., Hutter, H., Rosner, M. & Schöberl, T., 2005, In: Surface & coatings technology. 192, p. 225-230

    Research output: Contribution to journal › Article › Research › peer-review

  166. Published

    Multifunctional multi-component PVD coatings for cutting tools

    Kathrein, M., Michotte, C., Penoy, M., Polcik, P. & Mitterer, C., 2005, In: Surface & coatings technology. 200, p. 1867-1871

    Research output: Contribution to journal › Article › Research › peer-review

  167. Published

    Performance of nano-structured multilayer PVD coating TiAlN/VN in dry high speed milling of aerospace aluminium 7010-T7651

    Luo, Q., Robinson, G., Pittman, M., Howarth, M., Sim, W-M., Stalley, M. R., Leitner, H., Ebner, R., Caliskanoglu, Z. D. & Hovsepian, P. E., 2005, In: Surface & coatings technology. 200, p. 123-127

    Research output: Contribution to journal › Article › Research › peer-review

  168. Published

    Structure, mechanical and tribological properties for sputtered Ti1-xAlxN coatings with 0.5

    Kutschej, K., Mayrhofer, P. H., Kathrein, M., Polcik, P., Tessadri, R. & Mitterer, C., 2005, In: Surface & coatings technology. 200, p. 2358-2365

    Research output: Contribution to journal › Article › Research › peer-review

  169. Published

    Structure-property relations in Cr-C/a-C:H deposited by reactive magnetron sputtering

    Gassner, G., Mayrhofer, P., Mitterer, C. & Kiefer, J., 2005, In: Surface & coatings technology. 200, p. 1147-1150

    Research output: Contribution to journal › Article › Research › peer-review

  170. 2004
  171. Published

    A new low friction concept for Ti1-xAlxN based coatings in high temperature applications

    Kutschej, K., Mayrhofer, P. H., Mitterer, C., Polcik, P. & Kathrein, M., 2004, In: Surface & coatings technology. 188-189, p. 358-363

    Research output: Contribution to journal › Article › Research › peer-review

  172. Published

    Calorimetric evidence for frictional self-adaptation of TiAlN/VN superlattice coatings

    Mayrhofer, P. H., Hovsepian, P. E., Mitterer, C. & Münz, W-D., 2004, In: Surface & coatings technology. 177-178, p. 341-347

    Research output: Contribution to journal › Article › Research › peer-review

  173. Published

    Pulsed laser decomposition of silicon containing carbon thin films

    Lackner, J. M., Waldhauser, W., Ebner, R., Fian, A., Jakopic, G., Leising, G. & Schöberl, T., 2004, In: Surface & coatings technology. 177-178, p. 360-364

    Research output: Contribution to journal › Article › Research › peer-review

  174. Published

    Pulsed laser decomposition of titanium oxide coatings at room temperature - structural and tribological properties

    Lackner, J. M., Waldhauser, W., Ebner, R., Major, B. & Schöberl, T., 2004, In: Surface & coatings technology. 180-181, p. 585-590

    Research output: Contribution to journal › Article › Research › peer-review

  175. Published

    Room temperature deposition of (Ti,Al)N and (Ti,Al)(C,N) coatings by pulsed laser deposition for tribological applications

    Lackner, J. M., Waldhauser, W., Ebner, R., Keckes, J. & Schöberl, T., 2004, In: Surface & coatings technology. 177-178, p. 447-452

    Research output: Contribution to journal › Article › Research › peer-review

  176. 2003
  177. Published

    Structure and mechanical properties of magnetron sputtered Zr-Ti-Cu-N films

    Musil, J. & Daniel, R., 2003, In: Surface & coatings technology.

    Research output: Contribution to journal › Article › Research › peer-review

View graph of relations