Research output

1201 - 1300 out of 34,370Page size: 100

10
20
50
100

Sort by: Publication date

2024
Published
Hydrometallurgical treatment of Cr-Ni rich dust: Investigation regarding the extraction of Cr and Ni from stainless steel dust using different acids
Howard, T. W., 2024.
Research output: Contribution to conference › Poster › Research
Published
Identification of Application for Measuring Devices in the Petroleum Upstream Industry and Quantification of the Global Market Potential
Sadil, F. B. V., 2024
Research output: Thesis › Master's Thesis
Published
IMPACT OF CYBER SPACE ON SECURITY IN THE CONTEXT OF ARMED CONFLICTS: TOWARDS DISASTER RISK RESILIENCE
Milenković, D., Cvetković, V., Aleksandar, I. & Renner, R., 2024, International Yearbook Faculty of Security. Vol. 1. p. 29 53 p. (Skopje: International yearbook of the Faculty of security).
Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research
Published
Impact of measurement errors on machine learning models in steel production
Rechberger, A., 2024
Research output: Thesis › Master's Thesis
Published
Impact of microstructural features on the fatigue strength of cast alloys by means of a layer-based approach
Oberreiter, M., 2024
Research output: Thesis › Doctoral Thesis
Impact of pressure drop on metallurgical performance of pneumatic flotation using the Concorde Cell™ technology
Peña Lavado, X. K., 2024
Research output: Thesis › Master's Thesis
Published
Impact of the Wire Arc Additive Manufacturing (WAAM) process on the distortion and residual stress state of rapidly rotating components in solid/liquid separation
Ruess, L., 2024
Research output: Thesis › Master's Thesis
Published
Improved Research Technique on the Influence of CO2 on Wellbore Cement under Downhole Conditions
Plessing, E., 2024
Research output: Thesis › Master's Thesis
Published
Increasing Efficiency in Sensor-Based Sorting Processes for Waste Streams consisting of Plastics
Friedrich, K., 2024
Research output: Thesis › Doctoral Thesis
Published
Inductive Thermography – a non-destructive inspection technique
Oswald-Tranta, B., 2024, 17th Quantitative InfraRed Thermography Conference.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Industrial Internet-of-Things Sensorsysteme für akustisches Condition-Monitoring in der Instandhaltung: Produktionsoptimierung durch vorausschauende Instandhaltung mittels akustischer Zustandsüberwachung
Kammerhofer, T., Thurner, T. & Ninevski, D., 2024, 14 p.
Research output: Book/Report › Anthology › Research
Published
Industry 4.0 @ Chair of Metal Forming
Prabitz, K. M., Stockinger, M., Walzl, A., Wenda, A. & Czipin, M., 2024.
Research output: Contribution to conference › Poster › Transfer
Published
Influence of binder compositions, solvents, and material extrusion parameters on aluminum additive manufacturing via SDS
Hufnagl, M., 2024
Research output: Thesis › Master's Thesis
Published
Influence of Carbon Material Properties on Slag-Foaming Dynamics in Electric Arc Furnaces: A Review
Kieush, L. & Schenk, J., 2024, In: Steel research international. ??? Stand: 11. Februar 2025, ??? Stand: 11. Februar 2025
Research output: Contribution to journal › Review article › peer-review
Influence of Concorde Cell™ Blast Tube™ design on metallurgical performance: pressurized air, nozzle configuration and impingement bowl
Lkhagvadorj, E., 2024
Research output: Thesis › Master's Thesis
Published
Influence of Different Manufacturing Methods and Conditions on the Fatigue Behavior of Nitrile Butadiene Rubber
Gehling, T., 2024
Research output: Thesis › Doctoral Thesis
Published
Influence of fundamental material properties on the oxygen exchange kinetics of the rare earth nickelate La2NiO4+δ for use as oxygen electrode in solid oxide electrolysis cells
Eisbacher-Lubensky, S. L., 2024
Research output: Thesis › Doctoral Thesis
Published
Influence of phase ratio and morphology on electrochemical performance of LSCF-GDC air electrodes for co-electrolysis
Buxbaum, B., Egger, A., Paulachan, P., Schöggl, J., Brunner, R. & Bucher, E., 2024, Proceedings of the 16^th European SOFC & SOE Forum 2024. 8 p. B0903
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Influence of Process Parameters on Interfacial Adhesion, Mechanical and Thermomechanical Properties of Glass Fiber Reinforced Epoxy Resin in Printed Circuit Boards
Obwaller, R., 2024
Research output: Thesis › Master's Thesis
Published
Influence of Sc, Y, Ti, Zr, Hf, V, Nb, and Ta on structural and mechanical properties of Cr-Al-N coatings
Mayrhofer, P., Zhou, L. & Holec, D., 2024, In: Berg- und hüttenmännische Monatshefte : BHM. 169.2024, 7, p. 375-380 6 p.
Research output: Contribution to journal › Article › Research
Published
Influence of the properties of different waste streams on gas-collecting base- and levelling layers with special focus on carbonate content in landfill technology
Flechsenhar, S., 2024
Research output: Thesis › Master's Thesis
Published
INLINE PROCESS MONITORING AND FAILURE MANAGEMENT CONCEPT FOR ATL
Yadav, N., Schledjewski, R. & Fauster, E., 2024, Proceedings of the 21st European Conference on Composite Materials: Volume 5 - Manufacturing. p. 497-502 6 p.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Inline Process Monitoring Using Near-Infrared Spectroscopy in Liquid Composite Molding Processes: Measurement and Analysis of Critical Parameters in Epoxy/Amine Resin Systems
Salzmann, M. L., 2024
Research output: Thesis › Doctoral Thesis
Published
Innerbetrieblicher Transport von Kunststoffabfällen
Hack, P., 2024
Research output: Thesis › Master's Thesis
Published
In-Situ Vibrationsmessung an Hydraulikaggregaten zur Inbetriebnahme eines Condition Monitoring Systems
Raffl, S., 2024
Research output: Thesis › Master's Thesis
Published
Inspection of short surface cracks by inductive thermography and by computer tomography
Oswald-Tranta, B., Hackl, A., Gorostegui-Colinas, E., Merino, A. M. & Westphal, P., 2024, Thermosense: Thermal Infrared Applications XLVI. Lopez, F., Avdelidis, N. P. & Ferrarini, G. (eds.). SPIE, 130470P. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 13047).
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Instrumentation and Signal Processing for the Verification of Directional Drilling
O'Leary, P., Terbuch, A., Ninevski, D., Mevec, D., Fruhmann, R., Khalilimotlaghkasmaei, N. & Habacher, M., 2024, 2024 IEEE International Instrumentation and Measurement Technology Conference (I2MTC) (I2MTC 2024).
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Integrated approach to SiC crystal growth: Multiphysics modeling and chemistry assessment in PVT furnaces
Ramadan, Z., Obermüller, T., Hammer, R. & Romaner, L., 2024.
Research output: Contribution to conference › Poster › Research › peer-review
Published
Integration of ESG into decision making: Options, trade-offs and comparison - case study OMV
Baranowski, A., 2024
Research output: Thesis › Master's Thesis
Published
Integration of Underground Hydrogen Storage and Transmission Networks - A Simulation-Based Analysis of holistic Hydrogen Networks
Fink, J., 2024
Research output: Thesis › Master's Thesis
Published
Integration of Well Life Cycle Data to Predict Electrical Submersible Pump Remaining Run Life
Ibrahem, M. A., 2024
Research output: Thesis › Master's Thesis
Published
Interface engineering at the nanoscale: Synthesis of low-energy boundaries
Kapp, M., Eckert, J. & Renk, O., 2024, In: Advanced engineering materials. 26.2024, 19, 14 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Interfacial Reaction Between Magnesia Refractory and Lithium Ion Battery (LIB) Recycling Slags
Toulabi Fard, A. H., 2024
Research output: Thesis › Master's Thesis
Published
Introduction to Additive Manufacturing
Godec, D., Pilipović, A., Breški, T., Ureña, J., Jordá, O., Martínez, M., Gonzalez-Gutierrez, J., Schuschnigg, S., Blasco, J. R. & Portolés, L., 2024, Springer Tracts in Additive Manufacturing. Springer Nature, p. 1-44 44 p. (Springer Tracts in Additive Manufacturing; vol. Part F3252).
Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research
Published
Investigating Hydrogen Diffusion in Filled Polymers with Simple Geometries: An ABAQUS Simulation Study
Graf, A. L., 2024
Research output: Thesis › Master's Thesis
Published
Investigating mechanical properties of silicon carbide coated carbon nanotube composite at elevated temperatures
Mo, J., Schaffar, G. J. K., Du, L., Maier-Kiener, V., Kiener, D., Vollebregt, S. & Zhang, G., 2024, 2024 IEEE 37th International Conference on Micro Electro Mechanical Systems (MEMS). Vol. 37.2024. p. 626-629 4 p. (IEEE access).
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Investigation and digital system characterization of acoustic emission signals from selected tribological contacts
Strablegg, C., 2024
Research output: Thesis › Doctoral Thesis
Published
Investigation of Carbon Produced by Pyrolysis: Characterisation and Processing
Agho, O. E., 2024
Research output: Thesis › Master's Thesis
Published
Investigation of lining solutions for a lined rock cavern at the site of Zentrum am Berg
Loucky, G., 2024
Research output: Thesis › Master's Thesis
Investigation of sulfide flotation with two types of sulfhydryl collectors in the case of a copper porphyry ore from Nevada
Shamsan, M., 2024
Research output: Thesis › Master's Thesis
Published
Investigation of the hydrogeology of the pore aquifer in the Bodenbauer-St.Ilgen area using geophysical methods
Fachathaler, P., 2024
Research output: Thesis › Master's Thesis
Published
Investigation of the lifetime of sintered interconnects in power electronics
Prutti, M. T., 2024
Research output: Thesis › Master's Thesis
Published
Investigation of the relationship between circular economy practices and circular economy outcomes in the manufacturing sector
Ganzi, A., 2024
Research output: Thesis › Master's Thesis
Published
Investigation on thermal plasma pyrolysis of methane for hydrogen gas and solid carbon production
Daghagheleh, O., 2024
Research output: Thesis › Doctoral Thesis
Published
Investigations of selected influences on the hydrogen-based reduction of iron ore ultra-fines in a fluidized bed
Wolfinger, T., 2024
Research output: Thesis › Doctoral Thesis
Published
Isothermal and Non-Isothermal DSC Analysis towards the Formulation of a Low-Temperature Curing Epoxy-Alcohol Resin
Lang, J., 2024
Research output: Thesis › Master's Thesis
Published
Karbonatisierung von Betonabbruch mit einem Industrieabgasstrom
Lashin, N., 2024
Research output: Thesis › Master's Thesis
Published
KI in der Instandhaltung - Stand und Ausblick
Biedermann, H., 2024, Der Instandhaltungsberater. Köln, p. 1 24 p.
Research output: Chapter in Book/Report/Conference proceeding › Chapter › Transfer
Published
Knowledge Constrained Optimization: Signal Separation and Optimal Control
Handler, J., 2024
Research output: Thesis › Doctoral Thesis
Published
Konsequenzen der Corporate Sustainability Due Diligence Directive (CSDDD) im industriellen Umfeld: Eine empirische Erhebung in Österreich
Friedrich, K., 2024
Research output: Thesis › Master's Thesis
Published
Konstruktion und Auslegung eines Brennstoffzellensystems für ein Side-by-Side-Fahrzeug
Jörg, V., 2024
Research output: Thesis › Master's Thesis
Published
Konventioneller Tunnelbau bei geringer Überlagerung - Stand der Technik unter Berücksichtigung von Nachhaltigkeitsaspekten
Galler, R., Evangelatos, A. & Hauzinger, E., 2024, Ernst & Sohn. 29 p.
Research output: Book/Report › Commissioned report › Research
Published
Konzepte für die Gewinnung von Polyolefinen aus gemischten Gewerbeabfällen für das Recycling
Gwandner, J., 2024
Research output: Thesis › Master's Thesis
Published
Konzeptionierung und Evaluierung einer in-situ Verschleißmessung an experimentellen Gleitlagermodellprüfungen
Ball, T., 2024
Research output: Thesis › Master's Thesis
Published
Konzept zur innerbetrieblichen Rückverfolgbarkeit von Rohmaterialien und Halbfabrikaten unter Berücksichtigung der EU-Lieferkettenrichtlinie
Hirschhuber, K., 2024
Research output: Thesis › Master's Thesis
Published
Kreislaufwirtschaft in österreichischen KMU: Erfolgsfaktoren und Herausforderungen der Transformation des Produktions- und Logistiksystems vom linearen zum zirkulären Modell
Jöbstl, L., 2024
Research output: Thesis › Master's Thesis
Published
LITHOZ: Multi-Material 3D Printing
Schwentenwein, M., Schlacher, J. & Bermejo Moratinos, R., 2024, In: Ceramic applications. 12, 1, p. 40-43
Research output: Contribution to journal › Article › Transfer
Published
Local fatigue strength assessment of cast steel components considering manufacturing effects
Horvath, M., 2024
Research output: Thesis › Doctoral Thesis
Published
Lokales Verformungsverhalten von gehipptem Molybdän
Heim, C., 2024
Research output: Thesis › Master's Thesis
Published
Machine Learning-based approach for the calculation of the most energetic traveltimes for Kirchhoff prestack depth migration
Manzi, G., 2024
Research output: Thesis › Master's Thesis
Published
Machine-learning based pressure drop prediction for structured column packings
Schlager, M., Katongtun, T., Phromphithak, S., Khuenkaeo, N., Tippayawong, N. & Lehner, M., 2024.
Research output: Contribution to conference › Paper › peer-review
Published
Maßnahmen zur Senkung der Rücklauftemperatur im Fernwärme-Verbundnetz der Salzburg AG
Steiner, T., 2024
Research output: Thesis › Master's Thesis
Published
Material data determination of liquid silicone rubber: characterization methods for a reliable injection moulding simulation
Azevedo de Freitas, M., 2024
Research output: Thesis › Doctoral Thesis
Published
Material Selection and Process Development of Droplet Based Additive Manufacturing for Medical Implants
Hentschel, L., 2024
Research output: Thesis › Doctoral Thesis
Published
Mean-Field-Model Development for Void Formation in SAC305-Solder Bumps
Huber, A., 2024
Research output: Thesis › Master's Thesis
Published
Measurement of diffusion and activity coefficients in slags
Halwax, A., 2024
Research output: Thesis › Doctoral Thesis
Published
Measurement of the heat transfer in the primary cooling area of a laboratory direct chill casting plant for alloy design.
Weidinger, A., 2024, Light Metals 2024. p. 1055 - 1061 7 p.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Mechanical and electronic properties of monolayer TMDCs: A DFT study
Ziegler, M., 2024
Research output: Thesis › Master's Thesis
Published
Mechanisch-thermochemische Verfahrenskombination für das Recycling von Feinfraktionen aus Abfallbehandlungsanlagen
Kremlicka, T., Maier, B., Demschar, P., Steiner, S. & Sedlazeck, K. P., 2024, 13. Wissenschaftskongress Kreislauf- und Ressourcenwirtschaft: am 15. und 16. März 2024 an der Technischen Universität Wien. Innsbruck Univ. Press, p. 317-320 4 p.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Metallic Thin Film Fatigue Dominated by the Interface Character
Gebhart, D., 2024
Research output: Thesis › Doctoral Thesis
Published
Methanation of CO/CO2 mixtures
Krammer, A., 2024
Research output: Thesis › Doctoral Thesis
Published
Methodenentwicklung zur Herstellung von stickstofflegierten Stählen mittels Laborschmelzen und deren thermodynamischen Charakterisierung im Hochtemperaturbereich
Donauer, P., 2024
Research output: Thesis › Master's Thesis
Published
Methodenentwicklung zur Staubcharakterisierung beim Wasserstoffplasma-Schmelzreduktionsprozess
Lanzmaier, R., 2024
Research output: Thesis › Master's Thesis
Published
Microfacies, biostratigraphy and sequence stratigraphy of the Upper Triassic Dachstein fore-reef facies in the East Bosnian-Durmitor megaunit (northern Montenegro)
Zöhrer, O., 2024
Research output: Thesis › Master's Thesis
Published
Micro-mechanical approach to assess the strength of nanocrystalline tungsten-copper composites
Schmuck, K. S., 2024
Research output: Thesis › Doctoral Thesis
Published
Microplastic response of 2PP-printed ceramics
Sänger, J. C., Riechers, B., Pauw, B. R., Maaß, R. & Günster, J., 2024, In: Journal of the American Ceramic Society. 107, p. 6636-6645
Research output: Contribution to journal › Article › Research › peer-review
Published
Microstructural influences on bending resonance fatigue in nickel-based superalloy Rene'88DT
Taurer, G., 2024
Research output: Thesis › Master's Thesis
Published
Microstructure and magnetic properties of high-pressure torsion synthesized hard magnetic materials
Weissitsch, L. E., 2024
Research output: Thesis › Doctoral Thesis
Published
Microstructure evolution in Al-Mg-Si alloys controlled by Fe-rich intermetallic primary phases
Trink, B., 2024.
Research output: Contribution to conference › Poster › Research
Published
Microstructure evolution of Al-Cu-Mg based alloy during rolling and annealing
Moradizadeh, A., 2024
Research output: Thesis › Master's Thesis
Published
Microstructures and mechanical properties of CoCrFeNiAl-based high-entropy alloys
Zhang, Z., 2024
Research output: Thesis › Doctoral Thesis
Published
Mikromechanische Charakterisierung von Phasenübergängen
Gottlieb, H., 2024
Research output: Thesis › Master's Thesis
Mineral characterisation and flotation of fine cassiterite from ore mountains using advanced Pneumatic Flotation Imhoflot
Al-Murish, N., 2024
Research output: Thesis › Master's Thesis
Published
Mineralische Nebenprodukte und Abfälle 11: - Aschen, Schlacken, Stäube und Baurestmassen -
Thiel, S., Thomé-Kozmiensky, E., Antrekowitsch, H., Pomberger, R. & Firsbach, F., 2024, 323 p.
Research output: Book/Report › Anthology › Research
Published
Mineralogische Differenzierung von Spodumen-führenden Pegmatiten und ihren Wirtsgesteinen als Grundlage der magnetischen Prospektion
Rutkowski, C., 2024
Research output: Thesis › Master's Thesis
Published
Modeling and simulation of the copper recycling from wastewater in AT&S
Notter, S., 2024
Research output: Thesis › Master's Thesis
Published
Modeling of CO2 Injection and Sinking in Supercritical Geothermal Systems
Scherounigg, C., 2024
Research output: Thesis › Master's Thesis
Published
Modellierung eines Pyrolyseprozesses zur optimalen Aufbereitung von Sekundärrohstoffen unter Nutzung von verfügbaren Abwärmepotentialen
Cont, A., 2024
Research output: Thesis › Master's Thesis
Published
Modellierung und Experimentelle Validierung einer Antriebswinde zur Erstellung eines Digitalen Zwillings für die Überprüfung der Software einer Programmierbaren Logischen Einheit
Wenk, I., 2024
Research output: Thesis › Master's Thesis
Published
Modellierung von Grundwasserströmung und reaktivem Stofftransport im mit PFAS kontaminierten Aquifer Westliches Leibnitzer Feld, Steiermark und Ableitung von Sanierungsvarianten
Moderegger, R., 2024
Research output: Thesis › Master's Thesis
Modelling of slite flotation based on pilot ale test work
Oladele, S. O., 2024
Research output: Thesis › Master's Thesis
Published
Modification of PTFE particles towards anion conducting properties
Sydor, B., 2024
Research output: Thesis › Master's Thesis
Published
Möglichkeiten zum Management von Fehlteilen am Beispiel eines Schienenfahrzeugherstellers
Stöllner, L., 2024
Research output: Thesis › Master's Thesis
Published
Möglichkeiten zur Gestaltung einer Abfallendebestimmung aus technisch-rechtlicher Sicht
Kasper, T. M., 2024
Research output: Thesis › Doctoral Thesis
Published
Monitoring system for belt conveyors - Industrial application
Prenner, M., Müller, J., Lux, G. & Winkler, D., 2024, MHCL 2024. p. 39 44 p.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Monitoringsystem für Gurtförderer - Industrieanwendung
Winkler, D., 2024
Research output: Thesis › Master's Thesis
Published
Multi-Armed Bandits in IEEE 802.11ac: Efficient Algorithms and Testbed Experiments
Le, M., Bile, P., Pawar, S. P., Auer, P., Thapa, P. D., Hühn, T. & Jorswieck, E. A., 2024, 2024 IEEE International Workshop Technical Committee on Communications Quality and Reliability (CQR).
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Multi-Criteria Evaluation of Critical Raw Materials in Eco-Design Products within the European Context
Postolachi, B., 2024
Research output: Thesis › Master's Thesis
Published
Multi-doped perovskite-type oxides: How a combination of dopants influences exsolution
Drexler, H., 2024.
Research output: Contribution to conference › Poster › Research
Published
Multi-doped perovskite-type oxides: How a combination of dopants influences exsolution
Drexler, H., Berger, T., Schrenk, F., Lindenthal, L., Ruh, T. & Rameshan, C., 2024.
Research output: Contribution to conference › Abstract › peer-review

Previous 1...9 10 11 12 13 14 15 16 ...344 Next

Research Portal

Research output

Advanced filters