Chair of Processing of Composites and Design for Recycling (270)

Organisational unit: Chair

1 - 372 out of 372Page size: 500

Sort by: Publication date

Research output

2025
Published
The Fossil, the Green, and the In-Between: Life Cycle Assessment of Manufacturing Composites with Varying Bio-Based Content
Kirschnick, U., Ravindran, B., Sieberer, M., Fauster, E. & Feuchter, M., 20 Feb 2025, In: Journal of composites science. 9.2025, 3, 18 p., 93.
Research output: Contribution to journal › Article › Research › peer-review
2024
Published
A new ISO standard for the experimental characterization of in-plane permeability of fibrous reinforcements
May, D., Advani, S. G., Duhovic, M., Endruweit, A., Fauster, E., George, A., Liotier, P. J., Lira, C., Lomov, S. V., Pucci, M. F., Schmeer, S., Abliz, D., Berg, D. C., Binetruy, C., Bodaghi, M., Comas-Cardona, S., Etchells, M., Govignon, Q., Koorevaar, A. & Michaud, V. & 9 others, Park, C. H., Schubnel, R., Sousa, P., Ravel, R., Rouhi, M., Syerko, E., Umer, R., Vollmer, M. & Yong, A., 20 Nov 2024, In: Composites Part A: Applied Science and Manufacturing. 190.2025, March, 13 p., 108592.
Research output: Contribution to journal › Article › Research › peer-review
Published
Challenges and Opportunities in Carbon Fiber-Reinforced Polymer Composites Circularity: A Prospective LCA Case Study
Miao, Z. C., Kirschnick, U., Chen, H. & Carbajales-Dale, M., 23 Oct 2024.
Research output: Contribution to conference › Poster › Research › peer-review
Published
Characterisation of the Mechanical Properties of Natural Fibre Polypropylene Composites Manufactured with Automated Tape Placement
Legenstein, A., Haiden, L., Feuchter, M. & Fauster, E., 1 Oct 2024, In: Journal of composites science. 8.2024, 10, 21 p., 396.
Research output: Contribution to journal › Article › Research › peer-review
Published
Spritzgießcompoundieren im Recycling von Post-Consumer PP Abfällen
Zidar, D., Krempl, N., Shahroodi, Z., Kirschnick, U. & Holzer, C., 1 Sept 2024, In: Jahresmagazin Kunststofftechnik : Ingenieurwissenschaften ... : im Fokus . 2024, 01, p. 38-42 5 p.
Research output: Contribution to journal › Article › Research
Published
Reprocessable carbon fiber vitrimer composites: Reclamation and reformatting of carbon fibers for second generation composite materials
Sharma, H., Bender, M., Kim, G., Lee, D., Caglayan, C., Schlögl, S., Yun, G. J., Kumar, A. & Rana, S., 24 Aug 2024, In: Journal of Applied Polymer Science. 141.2024, 41, 15 p., e56074.
Research output: Contribution to journal › Article › Research › peer-review
Published
Waste-to-Value Feasibility Study: Assessing the Viability and Quality of Incorporating Different Postindustrial Glass-Fiber Composites into Postconsumer Recycled Polypropylene
Shahroodi, Z., Krempl, N., Zidar, D., Mayrhofer, T., Kirschnick, U., Arbeiter, F., Duretek, I. & Holzer, C., 7 Aug 2024, In: ACS Sustainable Chemistry and Engineering. 12.2024, 33, p. 12619-12631 13 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Fatigue and residual strain monitoring for thermoplastic composite using embedded FBG inscribed in highly-birefringent side-hole elliptical core optical fiber
Wachtarczyk, K., Yadav, N., Błachut, A., Gąsior, P., Schledjewski, R. & Kaleta, J., 27 Jul 2024, In: Measurement. 238.2024, October, 14 p., 115404.
Research output: Contribution to journal › Article › Research › peer-review
Published
Manufacturing bio-based fiber-reinforced polymer composites: Process performance in RTM and VARI processes
Kirschnick, U., Feuchter, M., Ravindran, B., Salzmann, M., Duretek, I., Fauster, E. & Schledjewski, R., 19 Jul 2024, In: Advanced Manufacturing: Polymer and Composites Science. 10.2024, 1, 12 p., 2379205.
Research output: Contribution to journal › Article › Research › peer-review
Published
INFLUENCE OF FLUID PROPERTIES ON TRANSVERSE FABRIC COMPRESSIBILITY DURING IN-SITU IMPREGNATION
Bender, M. & Fauster, E., 5 Jul 2024, Proceedings of the 21st European Conference on Composite Materials: Volume 3 - Material and Structural Behavior – Simulation & Testing. 1 ed. Nantes, Vol. 3. p. 1140 - 1147 8 p.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Near-infrared spectroscopy in resin transfer molding—determination of the degree of cure
Salzmann, M., Märzinger, W., Teuchtmann, M., Ravindran, B., Kirschnick, U. & Fauster, E., Jun 2024, In: International Journal of Advanced Manufacturing Technology. 132.2024, 11-12, p. 5557-5565 9 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Compaction behaviour of textile reinforcements
Bender, M., 23 May 2024.
Research output: Contribution to conference › Poster › Transfer
Published
Effect of Flashlamp Heating System Parameters on the Wedge Peel Strength of Thermoplastic Carbon Fiber Tape in the Automated Tape Placement Process
Legenstein, A. & Fauster, E., 29 Apr 2024, In: Journal of Manufacturing and Materials Processing. 8.2024, 3, 17 p., 91.
Research output: Contribution to journal › Article › Research › peer-review
Published
Impact Characteristics and Repair Approaches of Distinct Bio-Based Matrix Composites: A Comparative Analysis
Ravindran, B., Agathocleous, T., Oswald-Tranta, B., Fauster, E. & Feuchter, M., 29 Mar 2024, In: Journal of composites science. 8.2024, 4, 20 p., 126.
Research output: Contribution to journal › Article › Research › peer-review
Published
Effect of different weft-knitted structures on the mechanical performance of bio-based flexible composites
Schwaiger, M., Bender, M., Schirmer, H., Taesler, J., Feuchter, M. & Resch-Fauster, K., Mar 2024, In: Composites Part C: Open Access. 13.2024, March, 11 p., 100436.
Research output: Contribution to journal › Article › Research › peer-review
Published
Tensile properties of flexible composites with knitted reinforcements from various yarn materials
Schwaiger, M., Röper, F., Wolfahrt, M., Taesler, J., Schirmer, H., Salzmann, M., Feuchter, M. & Resch-Fauster, K., 20 Feb 2024, In: Polymer Composites. 45.2024, 3, p. 2602-2614 13 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Circular Economy Potential of Sustainable Bio-Based Composites: Repair, Recycle and Reuse
Ravindran, B. & Fauster, E., 2024.
Research output: Contribution to conference › Poster › Research
Published
Environmental impact assessment of a car door panel using recycled carbon fibers: Relevance of different life stages and influence of modelling choices
Kirschnick, U., Duchamp, B. & Fick, G., 2024, p. 56. 62 p.
Research output: Contribution to conference › Paper › peer-review
Published
Ermittlung der Gelzeit mittels Nahinfrarotspektroskopie in der lösungsmittelfreien Prepreg Herstellung
Schmid, S., 2024
Research output: Thesis › Master's Thesis
Published
Influence of Carbon Material Properties on Slag-Foaming Dynamics in Electric Arc Furnaces: A Review
Kieush, L. & Schenk, J., 2024, In: Steel research international. ??? Stand: 11. Februar 2025, ??? Stand: 11. Februar 2025
Research output: Contribution to journal › Review article › peer-review
Published
INLINE PROCESS MONITORING AND FAILURE MANAGEMENT CONCEPT FOR ATL
Yadav, N., Schledjewski, R. & Fauster, E., 2024, Proceedings of the 21st European Conference on Composite Materials: Volume 5 - Manufacturing. p. 497-502 6 p.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Inline Process Monitoring Using Near-Infrared Spectroscopy in Liquid Composite Molding Processes: Measurement and Analysis of Critical Parameters in Epoxy/Amine Resin Systems
Salzmann, M. L., 2024
Research output: Thesis › Doctoral Thesis
Published
On the Potential of Epoxy Binder Rovings in Automated Dry Fiber Filament Winding
Neunkirchen, S., 2024
Research output: Thesis › Doctoral Thesis
2023
Published
Effect of Binder Activation on in-Plane Capillary Flow in Multilayer Stacks of Carbon Fiber Fabrics
Neunkirchen, S., Bender, M. & Schledjewski, R., 21 Dec 2023, In: Applied composite materials. 31.2024, April, p. 709-719 11 p.
Research output: Contribution to journal › Article › Research › peer-review
E-pub ahead of print
Experimental validation of a new adaptable LCM mold filling software
Obertscheider, C., Fauster, E. & Stieber, S., 12 Dec 2023, (E-pub ahead of print) In: Advanced Manufacturing: Polymer and Composites Science. 9.2023, 1, 19 p., 2282310.
Research output: Contribution to journal › Article › Research › peer-review
Published
Novel test-rig for compaction behaviour analysis of textile reinforcements for improved RTM-process replication
Bender, M. & Fauster, E., 1 Nov 2023, In: Advanced Manufacturing: Polymer and Composites Science. 9.2023, 1, 5 p., 2263828.
Research output: Contribution to journal › Article › Research › peer-review
Published
Determination of the glass transition temperature of an epoxy prepreg by Near Infrared Spectroscopy
Salzmann, M., Teuchtmann, M. & Schledjewski, R., Aug 2023, In: Polymer Testing. 125.2023, August, 8 p., 108111.
Research output: Contribution to journal › Article › Research › peer-review
Published
Parametric effect on inline width control for thermoplastic automated tape layup
Yadav, N. & Schledjewski, R., Aug 2023.
Research output: Contribution to conference › Paper
Published
Inferring material properties from FRP processes via sim-to-real learning
Stieber, S., Schröter, N., Fauster, E., Bender, M., Schiendorfer, A. & Reif, W., 27 Jul 2023, In: International Journal of Advanced Manufacturing Technology. 128.2023, September, p. 1517–1533 17 p.
Research output: Contribution to journal › Article › Research › peer-review
E-pub ahead of print
Review of in-process defect monitoring for automated tape laying
Yadav, N. & Schledjewski, R., 20 Jul 2023, (E-pub ahead of print) In: Composites Part A: Applied Science and Manufacturing. 173.2023, Oktober, 16 p., 107654.
Research output: Contribution to journal › Article › Research › peer-review
Published
Resin avatar for Industry 4.0
Lira, C., Etchells, M., Wolfahrt, M., Fauster, E., Daforno, R. & Koorevaar, A., May 2023.
Research output: Contribution to conference › Abstract › peer-review
Published
Resin avatar for Industry 4.0
Lira, C., Etchells, M., Wolfahrt, M., Fauster, E., Daforno, R. & Koorevaar, A., May 2023.
Research output: Contribution to conference › Presentation › Research
Published
RTMsim - A Julia module for filling simulations in Resin Transfer Moulding with the Finite Area Method
Obertscheider, C. & Fauster, E., 15 Apr 2023, In: The journal of open source software. 8.2023, 8 p., 4763.
Research output: Contribution to journal › Article › Research › peer-review
Published
Stretch-Steering of Aligned Discontinuous Fiber Tapes on Highly Curved Paths using Automated Fiber Placement
Legenstein, A., Füssel, L., Tierney, J., Gillespie Jr., J. W., Heider, D. & Cender, T., Apr 2023, p. 992-1005. 13 p.
Research output: Contribution to conference › Paper › peer-review
E-pub ahead of print
In-line and off-line NDT defect monitoring for thermoplastic automated tape layup
Yadav, N., Oswald-Tranta, B., Gürocak, M., Galic, A., Adam, R. & Schledjewski, R., 31 Mar 2023, (E-pub ahead of print) In: NDT and E international. 137.2023, July, 8 p., 102839.
Research output: Contribution to journal › Article › Research › peer-review
Published
Investigation of the Mechanical Properties of Sandwich Composite Panels Made with Recyclates and Flax Fiber/Bio-Based Epoxy Processed by Liquid Composite Molding
Ravindran, B., Feuchter, M. & Schledjewski, R., 15 Mar 2023, In: Journal of composites science. 7.2023, 3, 16 p., 122.
Research output: Contribution to journal › Article › Research › peer-review
Published
Thermally Latent Bases in Dynamic Covalent Polymer Networks and their Emerging Applications
Reisinger, D., Kriehuber, M. U., Bender, M., Bautista-Anguís, D., Rieger, B. & Schlögl, S., 14 Mar 2023, In: Advanced materials. 35.2023, 24, 27 p., 2300830.
Research output: Contribution to journal › Article › Research › peer-review
Published
Bio-based soft composites with knitted reinforcements
Schwaiger, M., Bender, M., Schirmer, H., Taesler, J., Kosse, S., Feuchter, M. & Resch-Fauster, K., 2023.
Research output: Contribution to conference › Poster › Research
Published
Bio-based soft composites with knitted reinforcements
Schwaiger, M., Bender, M., Schirmer, H., Taesler, J., Kosse, S., Feuchter, M. & Resch-Fauster, K., 2023, 31st Leoben Conference on Polymer Engineering & Science. Leoben
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Circularity and sustainability of biobased polymer/natural fiber reinforced composite
Ravindran, B. & Schledjewski, R., 2023, Global Challenges for a Sustainable Society .
Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research
Published
Environmental assessment comparison of natural fiber reinforced polymer composites processing
Kirschnick, U., 2023.
Research output: Contribution to conference › Presentation › Research › peer-review
Published
Environmental assessment of natural fiber reinforced polymer composites processing
Kirschnick, U. & Schledjewski, R., 2023, 31st Leoben Conference on Polymer Engineering & Science.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Environmental performance comparison of a one-step and two-step compounding and injection molding process using recycled PP and GF
Kirschnick, U., 2023.
Research output: Contribution to conference › Presentation › Research › peer-review
Published
Environmental performance comparison of a one-step and two-step compounding and injection molding process using recycled PP and glass fibers
Kirschnick, U., Shahroodi, Z., Krempl, N. & Schledjewski, R., 2023, Polymer Meeting 15: Book of Abstracts.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Evaluation of repairing techniques for damaged natural fiber reinforced composites
Cardenas Velasco, J., 2023
Research output: Thesis › Master's Thesis
Published
Influence of the Textile Architecture on its Transversal Compaction Behaviour
Hollitsch, M., 2023
Research output: Thesis › Master's Thesis
Published
Inline monitoring and control for Automated Tape Laying
Yadav, N., 2023
Research output: Thesis › Doctoral Thesis
Published
Investigation of the influence of speed increase in pultrusion by means of design of experiment on the barrier properties of glass fiber reinforced polyester profiles.
Ekam, M., 2023
Research output: Thesis › Master's Thesis
Published
LCA of a recycled GFRP composite: Comparing attributional and consequential modelling approaches
Kirschnick, U., 2023.
Research output: Contribution to conference › Presentation › Research › peer-review
Published
Screening Life Cycle Assessment comparing One-step and Two-step Injection Molding Compounding using Conservative and Optimistic Scenarios
Kirschnick, U., Shahroodi, Z., Krempl, N. & Schledjewski, R., 2023, In: WSEAS transactions on environment and development. 19.2023, 11 p.
Research output: Contribution to journal › Article › Research › peer-review
2022
Published
COMPOSITES SUSTAINABILITY – MANUFACTURING, REPAIR, AND RECYCLING ARE CHALLENGING
Schledjewski, R., 22 Nov 2022, Proceedings SE Conference 22 Hamburg.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
A porous capillary tube approach for textile saturation
Neunkirchen, S., Blößl, Y. & Schledjewski, R., 10 Nov 2022, In: Composites science and technology. 230.2022, 10 November, 9 p., 109450.
Research output: Contribution to journal › Article › Research › peer-review
Published
Bio-based FRP composites and their circularity potential: Options for environmental assessment
Kirschnick, U., Kern, H. & Schledjewski, R., 10 Nov 2022.
Research output: Contribution to conference › Presentation › Research › peer-review
Published
Bio-based FRP composites and their circularity potential: Options for environmental assessment
Kirschnick, U., Kern, H. & Schledjewski, R., 9 Nov 2022.
Research output: Contribution to conference › Paper › peer-review
Published
Inline tape width control for thermoplastic automated tape layup
Yadav, N. & Schledjewski, R., 21 Oct 2022, In: Composites Part A: Applied Science and Manufacturing. 163.2022, December, 9 p., 107267.
Research output: Contribution to journal › Article › Research › peer-review
Published
Circularity and sustainability of biobased polymer/natural fiber reinforced composite
Ravindran, B. & Schledjewski, R., 20 Oct 2022.
Research output: Contribution to conference › Presentation › Research › peer-review
Published
Gel Point Determination in Resin Transfer Molding Process with Fiber Bragg Grating Inscribed in Side-Hole Elliptical Core Optical Fiber
Wachtarczyk, K., Bender, M., Fauster, E., Schledjewski, R., Gąsior, P. & Kaleta, J., 19 Sept 2022, In: Materials. 15.2022, 18, 14 p., 6497.
Research output: Contribution to journal › Article › Research › peer-review
Published
Dry fiber filament winding - Fundamentals and challenges
Neunkirchen, S. & Schledjewski, R., 15 Sept 2022.
Research output: Contribution to conference › Poster › Research
Published
Compressibility and Relaxation Characteristics of Bindered Non-Crimp-Fabrics Under Temperature and Injection Fluid Influence
Bender, M. & Fauster, E., 29 Aug 2022, Proceedings of the Munich Symposium on Lightweight Design 2021: Tagungsband zum Münchner Leichtbauseminar 2021. 1 ed. Heidelberg: Springer Vieweg, p. 44-58 14 p.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Capillary Driven Saturation of Textile Reinforcing Structures Proposal for an Extension of Lucas-Washburn Equation
Schledjewski, R., Blößl, Y. & Neunkirchen, S., 22 Jul 2022, Achievements and Trends in Material Forming- Peer-reviewed extended papers selected from the 25th International Conference on Material Forming, ESAFORM 2022. Vincze, G. & Barlat, F. (eds.). Trans Tech Publications, p. 1372-1378 7 p. (Key Engineering Materials; vol. 926 KEM).
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Mechanical flexible composites from renewable resources
Schwaiger, M., Bender, M. & Resch-Fauster, K., 21 Jul 2022, Book of Abstracts - Verbund 2022.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
A COMPARISON OF DIFFERENT NATURAL FIBER REINFORCED COMPOSITES USING RTM & VARI PROCESS
Ravindran, B., Ekam, M., Kirschnick, U., Le Vély, G., Salzmann, M., Schledjewski, R. & Schmid, S., 20 Jul 2022.
Research output: Contribution to conference › Poster › Research
Published
Experimental validation of the porous tube model for capillary rise
Neunkirchen, S., Blößl, Y. & Schledjewski, R., 20 Jul 2022.
Research output: Contribution to conference › Poster › Research
Published
Recycling GFRP composites: How to assess environmental performance?
Kirschnick, U., Krempl, N. & Schledjewski, R., 20 Jul 2022.
Research output: Contribution to conference › Poster › Research › peer-review
Published
Adapting the optical reflectivity of carbon fiber reinforced polymers on the nano-scale: Matrix vs. fiber modification
Haiden, L., Feuchter, M., Barbezat, M., Pansare, A., Brunner, A. J., Neunkirchen, S. & Pinter, G. G., Jul 2022, European Polymer Congress - Book of Abstracts. p. 282
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Using Near-Infrared-Spectroscopy for quality inspection of prepregs before processing
Salzmann, M., Schledjewski, R. & Teuchtmann, M., 27 Jun 2022.
Research output: Contribution to conference › Poster › Research
Published
Experimental validation of the porous tube model for capillary rise
Neunkirchen, S., Blößl, Y. & Schledjewski, R., 20 Jun 2022, 23. Symposium Verbundwerkstoffe und Werkstoffverbunde – Abstract Booklet. DGM, p. 28 1 p.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
The influence of recyclates on the mechanical and long-term properties of virgin materials
Hinczica, J., Geier, J., Kirschnick, U., Holzer, C., Frank, A. & Pinter, G. G., 11 Apr 2022.
Research output: Contribution to conference › Poster › Research › peer-review
Published
Improved layup quality during automated thermoplastic tape layup – Inline detection of consolidation force and tape geometry
Yadav, N. & Schledjewski, R., 6 Apr 2022. 2 p.
Research output: Contribution to conference › Paper
Published
The influence of recyclates on the mechanical and long-term properties of virgin materials
Hinczica, J., Geier, J., Kirschnick, U., Holzer, C., Frank, A. & Pinter, G. G., 4 Apr 2022.
Research output: Contribution to conference › Paper › peer-review
Published
In-line residual strain monitoring for thermoplastic automated tape layup using fiber Bragg grating sensors
Yadav, N., Wachtarczyk, K., Gąsior, P., Schledjewski, R. & Kaleta, J., 5 Jan 2022, In: Polymer Composites. 43.2022, 3, p. 1590-1602 13 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
High-performance composite with 100% bio-based carbon content produced from epoxidized linseed oil, citric acid and flax fiber reinforcement
Todorovic, A., Blößl, Y., Oreski, G. & Resch-Fauster, K., Jan 2022, In: Composites Part A: Applied Science and Manufacturing. 152.2022, January, 9 p., 106666.
Research output: Contribution to journal › Article › Research › peer-review
Published
Challenges in the use of highly birefringent fiber bragg gratings for strain sensing in composites
Wachtarczyk, K., Bender, M., Yadav, N., Gąsior, P., Schledjewski, R. & Kaleta, J., 2022.
Research output: Contribution to conference › Abstract
Published
DETERMINATION OF A RACETRACKING PASS-FAIL CRITERION FOR EDGE FLOW PERMEABILITY MEASUREMENT
George, A., Huntsman, M., Koorevaar, A., Fauster, E. & May, D., 2022, Characterization. Vassilopoulos, A. P. & Michaud, V. (eds.). p. 733-740 8 p. (ECCM 2022 - Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability; vol. 3).
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
EXPERIMENTAL CHARACTERIZATION OF TRANSVERSE FABRIC COMPRESSIBILITY BY MEANS OF IN-SITU-IMPREGNATION
Bender, M. & Fauster, E., 2022.
Research output: Contribution to conference › Paper
Published
Improved layup quality during automated thermoplastic tape layup – Inline detection of consolidation force and tape geometry
Yadav, N. & Schledjewski, R., 2022.
Research output: Contribution to conference › Abstract
Published
Inline NDT for thermoplastic Automated Tape Layup
Yadav, N., Oswald-Tranta, B. & Schledjewski, R., 2022.
Research output: Contribution to conference › Poster › Research
Published
Machine Learning Based Tape Width Prediction for the Thermoplastic Automated Tape Placement Process
Legenstein, A. & Schledjewski, R., 2022, Composites meet Sustainability – Proceedings of the 20th European Conference on Composite Materials. 8 p.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Monitoring of thermoplastic composites with an FBG inscribed in highly-birefringent optic fiber
Wachtarczyk, K., Yadav, N., Gąsior, P., Schledjewski, R. & Kaleta, J., 2022.
Research output: Contribution to conference › Abstract
Published
NDE optical based methods for liners assessment for hydrogen storage
Wachtarczyk, K., Gąsior, P., Kaleta, J. & Yadav, N., 2022.
Research output: Contribution to conference › Poster › Research
Published
Residual strain and structural health monitoring for automated tape layup using HiBi FBG sensor
Yadav, N., Wachtarczyk, K., Gąsior, P., Schledjewski, R. & Kaleta, J., 2022.
Research output: Contribution to conference › Poster › Research
Published
Residual strain and structural health monitoring for automated tape layup using HiBi FBG sensor
Yadav, N., 2022.
Research output: Contribution to conference › Abstract
Published
Soft composites from bio-based resources
Schwaiger, M., Bender, M., Taesler, J., Schirmer, H. & Resch-Fauster, K., 2022, Proceedings of the 20th European Conference on Composite Materials - Composites meet sustainability.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Verbundwerkstoffe auf Basis vitrimerer Polymersysteme: Verarbeitungsverhalten und Umformanalyse
Stryzek, M., 2022
Research output: Thesis › Master's Thesis
2021
Published
In-Plane Strain Measurement in Composite Structures with Fiber Bragg Grating Written in Side-Hole Elliptical Core Optical Fiber
Wachtarczyk, K., Gąsior, P., Kaleta, J., Anuszkiewicz, A., Bender, M., Schledjewski, R., Mergo, P. & Osuch, T., 31 Dec 2021, In: Materials. 15.2022, 1, 16 p., 77.
Research output: Contribution to journal › Article › Research › peer-review
Published
Instrumentation of an Inspection Test Rig for Geometry Measurement of Fiber Bundles in Automated Composite Manufacturing
Neunkirchen, S., Fauster, E., Lehner, S. & O'Leary, P., 13 Dec 2021, In: IEEE transactions on instrumentation and measurement. 71
Research output: Contribution to journal › Special issue › Research › peer-review
Published
Usage of Near-Infrared Spectroscopy for Inline Monitoring the Degree of Curing in RTM Processes
Salzmann, M., Blößl, Y., Todorovic, A. & Schledjewski, R., 17 Sept 2021, In: Polymers. 13.2021, 18, 13 p., 3145.
Research output: Contribution to journal › Article › Research › peer-review
Published
Methodenentwicklung zur kohärenten Charakterisierung bebinderter Verstärkungstextilen bei erhöhter Temperatur
Bender, M. & Fauster, E., 15 Sept 2021.
Research output: Contribution to conference › Poster › Research
Published
Thermoforming and Process Simulation of bio-based Form Sheets for Aircraft Applications (BioForS)
Legenstein, A., Salzmann, M. & Schledjewski, R., 15 Sept 2021.
Research output: Contribution to conference › Poster › Research
E-pub ahead of print
Ply-by-ply inline thermography inspection for thermoplastic automated tape layup
Yadav, N., Oswald-Tranta, B., Schledjewski, R. & Wachtarczyk, K., 13 Sept 2021, (E-pub ahead of print) In: Advanced Manufacturing: Polymer and Composites Science. 7.2021, 3-4, p. 49-59 11 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Bio-based Form Sheets for Aircraft Applications (BioForS)
Legenstein, A., Salzmann, M. & Schledjewski, R., 12 Sept 2021, 29th Leoben-Conference on Polymer Engineering and Science: 50 Years Polymer Engineering and Science at Montanuniversität Leoben. Friesenbichler, W. (ed.). Leoben, Vol. 10.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Holistic approach towards quality assurance for thermoplastic Automated Tape Layup
Yadav, N. & Schledjewski, R., Sept 2021.
Research output: Contribution to conference › Poster › Research
Published
In- and off-line NDT in automated in-situ consolidation tape layup
Yadav, N., Gürocak, M., Galic, A., Adam, R. & Schledjewski, R., Sept 2021, SAMPE EUROPE Conference and Exhibition 2021: Baden, Switzerland, 28-30 September 2021.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Out-of-plane permeability measurement for reinforcement textiles: A benchmark exercise
Yong, A., Aktas, A., May, D., Endruweit, A., Advani, S. G., Hubert, P., Abaimov, S. G., Abliz, D., Akhatov, I., Ali, M. A., Allen, T., Berg, D. C., Bickerton, S., Brauner, C., Brütsch, D., Caglar, B., Causse, P., Chiminelli, A., Cohades, A. & Comas-Cardona, S. & 32 others, Danzi, M., Dittmann, J., Dransfeld, C., Ermanni, P., Fauster, E., Garcia-Manrique, J. A., Grishaev, V., Guilloux, A., Hancioglu, M., Harazi, W., Herman, T., Huang, W., Kabachi, M. A., Keller, A., Kind, K., Laspalas, M., Lebedev, O. V., Lizaranzu, M., Long, A., Masania, K., Michaud, V., Middendorf, P., Salvatori, D., Schubnel, R., Sharp, N., Sozer, E. M., Thomas, J., Trochu, F., Umer, R., Valette, J., Wang, J. H. & Willenbacher, B., Sept 2021, In: Composites Part A: Applied Science and Manufacturing. 148.2021, September, 16 p., 106480.
Research output: Contribution to journal › Article › Research › peer-review
Published
Tack measurement of bindered rovings for the dry fiber winding process
Neunkirchen, S. & Schledjewski, R., Sept 2021, In: Polymer Composites. 42, 9, p. 4607-4616 10 p., 26172.
Research output: Contribution to journal › Article › Research › peer-review
E-pub ahead of print
Equation for modelling energy transfers in multi-phase flows through porous media, optimised for liquid composite moulding processes
Sebastian, R. G., Obertscheider, C., Fauster, E. & Schledjewski, R., 20 Aug 2021, (E-pub ahead of print) In: International journal of heat and mass transfer. 181.2021, December, 8 p., 121856.
Research output: Contribution to journal › Article › Research › peer-review
Published
Natural fibre reinforced thermoplastic sheet material: Thermoforming behaviour and process simulation: Thermoforming and Process Simulation
Legenstein, A., Salzmann, M. & Schledjewski, R., 29 Jun 2021.
Research output: Contribution to conference › Poster › Research › peer-review
Published
Spektroskopische Analyse von Prepregs (SAPP)
Salzmann, M. & Schledjewski, R., 29 Jun 2021.
Research output: Contribution to conference › Poster › Research › peer-review
Published
What to do with the waste? Options for GFRP and CFRP waste treatment along the value chain
Kirschnick, U. & Schledjewski, R., 29 Jun 2021.
Research output: Contribution to conference › Poster › Research › peer-review
Published
Validation of Selected Optical Methods for Assessing Polyethylene (PE) Liners Used in High Pressure Vessels for Hydrogen Storage
Gąsior, P., Wachtarczyk, K., Błachut, A., Kaleta, J., Yadav, N., Ozga, M. & Baron, A., 18 Jun 2021, In: Applied Sciences : open access journal. 11.2021, 12, 20 p., 5667.
Research output: Contribution to journal › Article › Research › peer-review
Published
Instrumentation of a Roving Inspection Test Rig with Surface Geometry Measurement of Fiber Bundles
Lehner, S., Neunkirchen, S., Fauster, E. & O'Leary, P., 17 May 2021, I2MTC 2021 - IEEE International Instrumentation and Measurement Technology Conference, Proceedings. IEEE Xplore (online): Institute of Electrical and Electronics Engineers, 9459889. (Conference Record - IEEE Instrumentation and Measurement Technology Conference; vol. 2021-May).
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Sustainability in natural gas reservoir drilling: A review on environmentally and economically friendly fluids and optimal waste management
Tabatabaei, M., Kazemzadeh, F., Sabah, M. & Wood, D. A., 1 Jan 2021, Sustainable Natural Gas Reservoir and Production Engineering: Volume 1. Elsevier, Vol. 1. p. 269-304 36 p.
Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research
Published
ACTIVE RTM PROCESS MANAGEMENT BASED ON PHENOMENOLOGICAL MODELS
Fauster, E., Hergan, P. & Schledjewski, R., 2021.
Research output: Contribution to conference › Paper › peer-review
Published
Defect monitoring and control for thermoplastic Automated Tape Layup
Yadav, N. & Schledjewski, R., 2021.
Research output: Contribution to conference › Poster › Research › peer-review
Published
Impregnation of natural fiber reinforcements in liquid composite molding processes
Blößl, Y., 2021
Research output: Thesis › Doctoral Thesis
Published
Neuartige Leichtbaumaterialien mit 100% biobasiertem Kohlenstoffanteil
Todorovic, A., Blößl, Y. & Resch-Fauster, K., 2021, In: ACstyria newsletter .
Research output: Contribution to journal › Article › Transfer
Published
Nur mit Öl und Säure: Von der Zitronensäure zu biobasierten Hochleistungs-Composites
Todorovic, A., Resch-Fauster, K., Blößl, Y. & Schledjewski, R., 2021, In: CU reports : internationales Mitgliedermagazin des Composites United. [Deutsche Ausgabe] . 2021, 2, p. 28-29 2 p.
Research output: Contribution to journal › Article › Research
Published
PermeabilityNets: Comparing Neural Network Architectures on a Sequence-to-Instance Task in CFRP Manufacturing
Stieber, S., Schroter, N., Fauster, E., Schiendorfer, A. & Reif, W., 2021, Proceedings - 20th IEEE International Conference on Machine Learning and Applications, ICMLA 2021. Wani, M. A., Sethi, I. K., Shi, W., Qu, G., Raicu, D. S. & Jin, R. (eds.). Institute of Electrical and Electronics Engineers, p. 694-697 4 p. (Proceedings - 20th IEEE International Conference on Machine Learning and Applications, ICMLA 2021).
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Processing of Fibre-Reinforced Polymer Composites Based on Phenomenological Models
Fauster, E., Hergan, P. & Schledjewski, R., 2021, Polymer Meeting 14: Book of Abstracts.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
2020
Published
Experimental characterisation of textile compaction response: a benchmark exercise
Young, A., Aktas, A., May, D., Endruweit, A., Lomov, S. V., Advani, S. G., Hubert, P., Abaimov, S. G., Abliz, D., Akhatov, I., Ali, M. A., Allaoui, S., Allen, T., Berg, D. C., Bickerton, S., Caglar, B., Causse, P., Chiminelli, A., Comas-Cardona, S. & Danzi, M. & 30 others, Dittmann, J., Dransfeld, C., Ermanni, P., Fauster, E., George, A., Gillibert, J., Govignon, Q., Graupner, R., Grishaev, V., Guilloux, A., Kabachi, M. A., Keller, A., Kind, K., Large, D., Laspalas, M., Lebedev, O. V. L., Lizaranzu, M., Long, A. C., López, C., Masania, K., Michaud, V., Middendorf, P., Mitschang, P., van Oosterom, S., Schubnel, R., Sharp, N., Sousa, P., Trochu, F., Umer, R. & Wang, J. H., Dec 2020, In: Composites Part A: Applied Science and Manufacturing.
Research output: Contribution to journal › Article › Research › peer-review
Published
100 % bio-based high-performance epoxy resin
Todorovic, A., Blößl, Y. & Resch-Fauster, K., 11 Nov 2020.
Research output: Contribution to conference › Poster › Research
Published
Fatigue monitoring of flax fibre reinforced epoxy composites using integrated fibre-optical FBG sensors
Szebényi, G., Blößl, Y., Hegedüs, G., Tábi, T., Czigany, T. & Schledjewski, R., 20 Oct 2020, In: Composites science and technology. 199, 108317.
Research output: Contribution to journal › Article › Research › peer-review
Published
A robust empirical model equation for the compaction response of textile reinforcements
Blößl, Y. & Schledjewski, R., 1 Oct 2020, In: Polymer Composites. 42.2021, 1, p. 297-308 12 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Applicability of fiber Bragg grating sensors for cure monitoring in resin transfer molding processes
Blößl, Y., Hegedüs, G., Szebényi, G., Tábi, T., Schledjewski, R. & Czigany, T., 10 Sept 2020, In: Journal of Reinforced Plastics and Composites.
Research output: Contribution to journal › Article › Research › peer-review
Published
High-performance thermoset with 100 % bio-based carbon content
Todorovic, A., Blößl, Y., Oreski, G. & Resch-Fauster, K., 22 Jul 2020, In: Polymer Degradation and Stability. 181.2020, November, 9 p., 109284.
Research output: Contribution to journal › Article › Research › peer-review
Published
Kinetic parameter estimation and simulation of pultrusion process of an epoxy-glass fiber system
Costa Dias, R. D. C., Leali Costa, M., Santos, L. D. S. & Schledjewski, R., 22 Jun 2020, In: Thermochimica Acta. 690.2020, August, 12 p., 178636.
Research output: Contribution to journal › Article › Research › peer-review
Published
Leistungsfähige Composites auf Biobasis für den Leichtbau
Anusic, A., Blößl, Y. & Resch-Fauster, K., 2 Jun 2020, In: KC-aktuell (Informationen aus dem Kunstoff-Cluster).
Research output: Contribution to journal › Article › Research
Published
Reliable and Sustainable composite production for Biobased Components (RSBC) Verarbeitung und Prozessmonitoring
Schledjewski, R., Blößl, Y. & Salzmann, M., 18 Feb 2020.
Research output: Contribution to conference › Poster › Transfer
E-pub ahead of print
Flow-speed-controlled quality optimisation for one-shot-hybrid RTM parts
Hergan, P., Fauster, E., Perkonigg, D., Pinter, G. & Schledjewski, R., 11 Feb 2020, (E-pub ahead of print) In: Advanced Manufacturing: Polymer and Composites Science. 6.2020, 1, p. 29-37 9 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Chancen und Herausforderungen bebinderter Textilien in der Faserkunststoffverbund-Verarbeitung
Tonejc, M., 2020
Research output: Thesis › Doctoral Thesis
Published
Elliptic paraboloid flow front modelling for in-plane permeability characterization of textile fabrics by the radial flow technique
Fauster, E., Berg, D. C., May, D., Endruweit, A., Blößl, Y. & Schledjewski, R., 2020, ECCM 2018 - 18th European Conference on Composite Materials. (ECCM 2018 - 18th European Conference on Composite Materials).
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Integration of Carbon Fiber Reinforced Plastic Components in a Car Body Structure
Gfrerrer, M., 2020
Research output: Thesis › Master's Thesis
Published
Online thermography inspection for automated tape layup
Yadav, N., Oswald-Tranta, B., Schledjewski, R. & Habicher, M., 2020, Thermosense: Thermal Infrared Applications XLII. Oswald-Tranta, B. & Zalameda, J. N. (eds.). SPIE, Vol. 11409. 114090H. (Proceedings of SPIE).
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Pultrusion of thermoset based profiles-state of the art regarding materials, process set-ups, process modeling, and process simulation
Costa Dias, R. D. C., 2020
Research output: Thesis › Doctoral Thesis
2019
E-pub ahead of print
A reference specimen for compaction tests of fiber reinforcements
May, D., Kühn, F., Etchells, M., Fauster, E., Endruweit, A. & Lira, C., 13 Dec 2019, (E-pub ahead of print) In: Advanced Manufacturing: Polymer and Composites Science. 5.2019, 4, p. 230-233 4 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
High performance composite with 100% bio-based carbon content
Anusic, A., Blößl, Y. & Resch-Fauster, K., 12 Nov 2019.
Research output: Contribution to conference › Poster › Research
Published
SAFE AND EFFICIENT HEATING – HOW TO IDENTIFY THE BEST PERFORMING HEATING METHOD FOR THERMOPLASTIC TAPE PLACEMENT
Schledjewski, R. & Yadav, N., 17 Sept 2019, Proceedings SAMPE Europe Conference 2019 Nantes.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Influence of test fluids on the permeability of epoxy powder bindered non-crimp fabrics
Tonejc, M., Ebner, C., Fauster, E. & Schledjewski, R., 1 Aug 2019, In: Advanced Manufacturing: Polymer and Composites Science. 5.2019, 3, p. 128-139 12 p.
Research output: Contribution to journal › Article › Research › peer-review
E-pub ahead of print
Liquid composite molding reproducibility in real-world production of fiber reinforced polymeric composites: a review of challenges and solutions
Konstantopoulos, S., Hueber, C., Antoniadis, I., Summerscales, J. & Schledjewski, R., 1 Jul 2019, (E-pub ahead of print) In: Advanced Manufacturing: Polymer and Composites Science. 5.2019, 3, p. 85-99 15 p.
Research output: Contribution to journal › Review article › peer-review
Published
Investigation on the Influence of Pressure Terms in a Volume-Averaged Energy Balance in the Modelling of Liquid Composite Moulding Processes
Sebastian, R. G., Obertscheider, C., Fauster, E. & Schledjewski, R., 27 Jun 2019, Key Engineering Materials. Hausmann, J. (ed.). Vol. 809. p. 480-486 7 p.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
In-plane permeability characterization of engineering textiles based on radial flow experiments: A benchmark exercise
May, D., Aktas, A., Advani, S. G., Berg, D. C., Endruweit, A., Fauster, E., Lomov, S. V., Long, A., Mitschang, P., Abaimov, S., Abliz, D., Akhatov, I., Ali, M. A., Allen, T. D., Bickerton, S., Bodaghi, M., Caglar, B., Caglar, H., Chiminelli, A. & Correia, N. & 35 others, Cosson, B., Danzi, M., Dittmann, J., Ermanni, P., Francucci, G., George, A., Grishaev, V., Hancioglu, M., Kabachi, M. A., Kind, K., Deléglise-Lagardère, M., Laspalas, M., Lebedev, O. V., Lizaranzu, M., Liotier, P. J., Middendorf, P., Morán, J., Park, C. H., Pipes, R. B., Pucci, M. F., Raynal, J., Rodriguez, E. S., Schledjewski, R., Schubnel, R., Sharp, N., Sims, G., Sozer, E. M., Sousa, P., Thomas, J., Umer, R., Wijaya, W., Willenbacher, B., Yong, A., Zaremba, S. & Ziegmann, G., 1 Jun 2019, In: Composites Part A: Applied Science and Manufacturing. 121.2019, June, p. 100-114 15 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Parameter selection for peel strength optimization of thermoplastic CF-PA6 for humm3TM
Yadav, N. & Schledjewski, R., Jun 2019, p. 297-302. 6 p.
Research output: Contribution to conference › Poster › Research › peer-review
Published
Synthesis and thermo mechanical properties of a 100% bio based epoxy resin composite
Anusic, A., Mahendran, A. R., Blößl, Y. & Resch-Fauster, K., Jun 2019.
Research output: Contribution to conference › Poster › Research
Published
LIQUID COMPOSITE MOLDING – A BROAD RANGE OF PROCESSING TECHNIQUES BEING VERSATILE AND CHALLENGING
Schledjewski, R., Hergan, P. & Fauster, E., 15 May 2019, Proceedings of Polymer Composites 2019.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Selective comparison of heating sources for thermoplastic Automated Tape Placement
Yadav, N. & Schledjewski, R., May 2019, Automated Composites Manufacturing (ACM4): Fourth International Symposium. Hoa, S. V. (ed.). 8 p. 1
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Study on incorrect predictions for simulations of the vacuum infusion process
Sebastian, R. G., Obertscheider, C. & Schledjewski, R., 25 Apr 2019, 28. Leobener Kunststoff-Kolloquium 2019: Schriftenreihe Kunststofftechnik Leoben. Schuecker, C. & Fuchs, P. (eds.). Vol. 9.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Uncertainty propagation and sensitivity analysis in composite manufacturing cost estimation: ALPHA-framework and cost tool development
Hueber, C., Schwingshandl, N. & Schledjewski, R., 19 Apr 2019, In: Advanced Manufacturing: Polymer and Composites Science. 5.2019, 2, p. 69 - 84 16 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Custom OpenFOAM solver for modelling Liquid Composite Moulding processes
Sebastian, R. G., Obertscheider, C., Fauster, E. & Schledjewski, R., 13 Mar 2019.
Research output: Contribution to conference › Abstract
Published
Minimum invasive production-related SLS specimen manufacturing for interface characterization of hybrid materials made by RTM
Hergan, P., Lechner, C., Fauster, E., Pilz, G. & Schledjewski, R., 15 Jan 2019, In: International Journal of Advanced Manufacturing Technology. 102.2019, 5-8, p. 1963-1972 10 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Flash and inductive thermography for CFRP inspection
Oswald-Tranta, B., Tuschl, C. & Schledjewski, R., 1 Jan 2019, Thermosense: Thermal Infrared Applications XLI. de Vries, J. & Oswald-Tranta, B. (eds.). SPIE, 110040L. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 11004).
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
A methodology for determining preform compaction in bladder-assisted resin transfer molding with elastomeric bladders for tubular composite parts
Schillfahrt, C., Fauster, E. & Schledjewski, R., Jan 2019, In: International journal of material forming. 12.2019, 1, p. 1-15 15 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Entwicklung einer modellbasierten Fertigungstechnik zur intrinsischen Herstellung von hybriden Verbundwerkstoffen
Hergan, P., 2019
Research output: Thesis › Doctoral Thesis
Published
Holistic Concept for Efficient Composite Manufacturing
Hueber, C., 2019
Research output: Thesis › Doctoral Thesis
Published
Model Based Processing of Hybrid RTM Parts
Hergan, P., Fauster, E. & Schledjewski, R., 2019.
Research output: Contribution to conference › Paper › peer-review
Published
Untersuchung von CFK Proben mit induktiv angeregter Thermografie
Oswald-Tranta, B., Tuschl, C. & Schledjewski, R., 2019.
Research output: Contribution to conference › Paper › peer-review
2018
E-pub ahead of print
Production planning optimisation for composite aerospace manufacturing
Hueber, C., Fischer, G., Schwingshandl, N. & Schledjewski, R., 20 Dec 2018, (E-pub ahead of print) In: International Journal of Production Research. 57.2019, 18, p. 5857-5873 17 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
An experimental method for characterizing unsaturated 1D flow in tubular braided preforms during bladder-assisted resin transfer molding
Schillfahrt, C., Fauster, E. & Schledjewski, R., 1 Dec 2018, In: Polymer Composites. 39.2018, 12, p. 4666-4677 12 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Improving degree of cure in pultrusion process by optimizing die-temperature
Costa Dias, R. D. C., Santos, L. D. S., Ouzia, H. & Schledjewski, R., 1 Dec 2018, In: Materials Today Communications. 17.2018, December, p. 362-370 9 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Peel strength characterisation on ply/ply interface using wedge and T-peel/pull-type tests
Satheesh, B., Tonejc, M., Potakowskyj, L., Pletz, M., Fauster, E., Kaynak, B. & Schledjewski, R., 8 Nov 2018, In: Polymers & Polymer Composites (Polymers and polymer composites). 26.2018, 8-9, p. 431-435 5 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Path calculation, technology and opportunities in dry fiber winding: a review
Sofi, T., Neunkirchen, S. & Schledjewski, R., 10 Oct 2018, In: Advanced Manufacturing: Polymer and Composites Science. 4.2018, 3, p. 57-72 16 p.
Research output: Contribution to journal › Review article › peer-review
Published
Experimental characterization of single ply out-of-plane permeability through gaseous flow
Fauster, E., Vierkötter, C., Appel, L., Lugo, J., Schijve, W. & Heider, D., Sept 2018, In: Polymer Composites. 39.2018, 9, p. 3247-3258 12 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Application of vibrating vents to control void content of RTM parts
Hergan, P., Fauster, E. & Schledjewski, R., Jul 2018, Proceedings of SAMPE Europe Conference 2018. 7 p.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Winding Trajectories for Dry Filament Wound Preforms
Sofi, T. R. & Schledjewski, R., 28 Jun 2018.
Research output: Contribution to conference › Paper
Published
Natural fibre textile characterization for dual-scale flow prediction
Blößl, Y. & Schledjewski, R., 25 Jun 2018.
Research output: Contribution to conference › Poster › Research › peer-review
Published
Inline control of tape width during automated tape placement
Schledjewski, R., 24 Jun 2018, Proceedings of the 18th European Conference on Composite Materials.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
NATURAL FIBRE TEXTILE CHARACTERIZATION FOR DUAL-SCALE FLOW PREDICTION
Blößl, Y. & Schledjewski, R., 24 Jun 2018, Proceedings of the 18th European Conference on Composite Materials.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Image processing and data evaluation algorithms for reproducible optical in-plane permeability characterization by radial flow experiments
Fauster, E., Berg, D. C., Abliz, D., Grössing, H., Meiners, D., Ziegmann, G. & Schledjewski, R., 17 Jun 2018, In: Journal of composite materials. 53.2019, 1, p. 45-63 9 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Using (VA)RTM with a Rigid Mould to Produce Fibre Metal Laminates with Proven Impact Strength
Hergan, P., Li, Y., Zaloznik, L., Kaynak, B., Arbeiter, F., Fauster, E. & Schledjewski, R., 11 Jun 2018, In: Journal of Manufacturing and Materials Processing. 2.2018, 2, 12 p., 38.
Research output: Contribution to journal › Article › Research › peer-review
Published
Analysis of the spontaneous, capillary driven wetting behaviour in reinforcing textile structure
Blößl, Y. & Schledjewski, R., 30 May 2018, PROCEEDINGS OF THE 14TH INTERNATIONAL CONFERENCE ON FLOW PROCESSING IN COMPOSITE MATERIALS.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Forming of complex-shaped composite tubes using optimized bladder-assisted resin transfer molding
Schillfahrt, C., Fauster, E. & Schledjewski, R., 2 May 2018, Proceedings of the 21st International ESAFORM Conference on Material Forming, ESAFORM 2018. Vol. 1960. 020027
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
E-pub ahead of print
Robust evaluation of flow front data for in-plane permeability characterization by radial flow experiments
Fauster, E., Berg, D. C., May, D., Blößl, Y. & Schledjewski, R., 5 Mar 2018, (E-pub ahead of print) In: Advanced Manufacturing: Polymer and Composites Science. 4.2018, 1, p. 24-40 17 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Influence of processing parameters on quality factors of one-shot hybrid structures made by RTM
Hergan, P., Beter, J., Stelzer, S., Fauster, E. & Schledjewski, R., 21 Feb 2018, In: Production Engineering : research and development. 12.2018, 2, p. 185-194 10 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Automated thermoplastic tape placement – Is there a missing link to reach industrialization?
Schledjewski, R., 2018, Proceedings of SAMPE Europe Conference 2018.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Determination of the friction coefficient in dry-fiber filament winding
Neunkirchen, S. & Schledjewski, R., 2018, Proceedings of the 18th European Conference on Composite Materials.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Determination of the unsaturated through-thickness permeability of fibrous preforms based on flow front detection by ultrasound
Konstantopoulos, S., Grössing, H., Hergan, P. & Schledjewski, R., 2018, In: Polymer Composites. 39.2018, 2, p. 360-367 8 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Dünne CFK-Schaum-Sandwichstrukturen - Bewertung unterschiedlicher Fertigungsmöglichkeiten
Weninger, M., 2018
Research output: Thesis › Master's Thesis
Published
Experimental Process Pressure Analysis for Model-Based Manufacturing of Composites by Resin Transfer Moulding
Fauster, E., Thirunavukkarasu, J., Hergan, P. & Schledjewski, R., 2018, IOP Conference Series: Materials Science and Engineering.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Permeability of textile fabrics for fibre-reinforced polymer composites: Experimental methods, data analytics and application
Fauster, E., 2018
Research output: Thesis › Habilitation thesis › peer-review
Accepted/In press
POLYNOMIAL SURFACE MODELLING OF FLOW FRONT DATA FOR IN-PLANE PERMEABILITY CHARACTERIZATION OF TEXTILE FABRICS BY RADIAL FLOW EXPERIMENTS
Fauster, E., Berg, D. C., May, D., Blößl, Y. & Schledjewski, R., 2018, (Accepted/In press).
Research output: Contribution to conference › Paper › peer-review
Published
Quality controlled manufacturing of Hybrid-Metal CRFP Composites by Resin Transfer Moulding
Fauster, E., Hergan, P. & Schledjewski, R., 2018, Proceedings ICMAC 2018.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Sensorintegration in Sandwichverbundstrukturen für Luftfahrtinnenkomponenten
Lang, A., 2018
Research output: Thesis › Master's Thesis
2017
Published
Glass fiber/epoxy composites with integrated layer of carbon nanotubes for deformation detection
Slobodian, P., Lloret Pertegás, S., Riha, P., Matyas, J., Olejnik, R., Schledjewski, R. & Kovar, M., 29 Dec 2017, In: Composites science and technology. 156.2018, 1 March, p. 61-69 9 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Monitoring of FRPC manufacturing processes
Schledjewski, R., 15 Nov 2017, p. 359-367. 9 p.
Research output: Contribution to conference › Paper
Published
Influence of Cure Monitoring on the Curing Cycle Time and the Associated Economic Impact
Hueber, C., Konstantopoulos, S., Hergan, P., Höfler, J., Horejsi, K. & Schledjewski, R., 4 Nov 2017, In: Journal of Mineral, Metal and Material Engineering. 2017, 3, p. 58-65 8 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Permeability Customisation through Preform Manipulation Utilising 3D-Printing Technology
Tonejc, M., Pletz, M., Fauster, E. & Schledjewski, R., 1 Nov 2017, In: Polymers and Polymer Composites. 25.2017, 9, p. 651-660 10 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Permeability Customisation Through Preform Manipulation Utilizing 3D-Printing Technology
Tonejc, M., Pletz, M., Fauster, E. & Schledjewski, R., 1 Nov 2017, In: Polymers & Polymer Composites (Polymers and polymer composites). 25.2017, 9, p. 643-652 10 p.
Research output: Contribution to journal › Article › Research › peer-review
E-pub ahead of print
Influence of process pressures on filling behavior of tubular fabrics in bladder-assisted resin transfer molding
Schillfahrt, C., Fauster, E. & Schledjewski, R., 30 Oct 2017, (E-pub ahead of print) In: Advanced Manufacturing: Polymer and Composites Science. 3.2017, 4, p. 148-158 11 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Produktionsplanung um Übergang zwischen diskreter und Batch-Fertigung in der Composite Luftfahrt Industrie
Hueber, C., Fischer, G. & Schledjewski, R., Sept 2017, Logistisches Produktionsmanagement: 4. Wissenschaftlicher Industrielogistik-Dialog in Leoben (WiLD). Zsifkovits, H. E. & Altendorfer-Kaiser, S. (eds.). p. 63-70
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
INFLUENCE OF PROCESSING TEMPERATURES ON THE DEFLECTION OF HYBRID-METAL-CARBON COMPOSITES MADE BY RESIN TRANSFER MOULDING
Hergan, P., Beter, J., Stelzer, S., Fauster, E. & Schledjewski, R., 25 Aug 2017, Proceedings of the 21st International Conference on Composite Materials.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Cascade Injection Procedure for Bladder-assisted Resin Transfer Molding
Schillfahrt, C., Fauster, E. & Schledjewski, R., 21 Aug 2017. 11 p.
Research output: Contribution to conference › Paper › peer-review
Published
HybridRTM - Quality Controlled Manufacturing of Hybrid Material Composites through Resin Transfer Moulding
Fauster, E., Hergan, P., Stelzer, S., Scheiblhofer, S., Cespedes-Gonzales, G., Pfeifer, S., Rittenschober, B., Sieberer, M., Lauermann, M. & Schledjewski, R., 7 Jul 2017.
Research output: Contribution to conference › Paper › peer-review
Published
High performance green composites for green technologies
Schledjewski, R., Lloret Pertegas, S., Blößl, Y., Anusic, A., Resch-Fauster, K., Mahendran, A. R. & Wuzella, G., 6 Jul 2017, Key Engineering Materials. Trans Tech Publications, Vol. 742. p. 271-277 7 p.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
HybridRTM - Quality Controlled Manufacturing of Hybrid Material Composites through Resin Transfer Moulding
Fauster, E., 6 Jul 2017.
Research output: Contribution to conference › Presentation › Research
Published
Analytical modeling of textile parameters and draping behavior of 2D biaxial braided sleevings
Schillfahrt, C. & Schledjewski, R., 31 May 2017, In: Polymers & Polymer Composites (Polymers and polymer composites). 25.2017, 5, p. 315-326 12 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Development of fully bio-based composite materials for structural applications Processing case study based on small sized wind energy turbine blades
Schledjewski, R. & Blößl, Y., May 2017, Polymer Composites 2017. Foller, B. (ed.). p. 051-053
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Continuous welding of unidirectional fiber reinforced thermoplastic tape material
Schledjewski, R., 27 Apr 2017, AIP Conference Proceedings. American Institute of Physics, p. 1-5 5 p.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Modell-Basierte FKV-Verarbeitungstechnik an Beispielen der Flüssigimprägnierverfahren
Fauster, E., Hergan, P., Thirunavukkarasu, J., Vilaca Lourenco, G. & Schledjewski, R., 21 Apr 2017.
Research output: Contribution to conference › Poster › Research
Published
Bio-basierte Verbundwerkstoffe
Schledjewski, R., Resch-Fauster, K., Anusic, A. & Blößl, Y., Apr 2017, Tagungsband zum 26. Leobener Kunststoff-Kolloquium: Innovative Spritzgiesstechnologie - Trends und aktuelle Entwicklungen. Friesenbichler, W. & Berger, G. R. (eds.). Leoben: Eigenverlag, Vol. 7. p. 263-264
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Bio-basierte Verbundwerkstoffe
Schledjewski, R., Resch-Fauster, K., Anusic, A. & Blößl, Y., Apr 2017.
Research output: Contribution to conference › Poster › Transfer
Published
Effiziente Verarbeitung von Verbundwerkstoffen für Luftfahrtanwendungen
Schledjewski, R., Hueber, C., Konstantopoulos, S., Lloret Pertegas, S. & Tonejc, M., Apr 2017, Tagungsband zum 26. Leobener Kunststoff-Kolloquium: Innovative Spritzgiesstechnologie - Trends und aktuelle Entwicklungen. Friesenbichler, W. & Berger, G. R. (eds.). Leoben: Eigenverlag, Vol. 07. p. 261-262 2 p.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Effiziente Verarbeitung von Verbundwerkstoffen für Luftfahrtanwendungen
Schledjewski, R., Hueber, C., Konstantopoulos, S., Lloret Pertegas, S. & Tonejc, M., Apr 2017.
Research output: Contribution to conference › Poster › Transfer
Published
Verarbeitung von Verbundwerkstoffen
Schledjewski, R. & Fauster, E., Apr 2017, Tagungsband zum 26. Leobener Kunststoff-Kolloquium: Innovative Spritzgiesstechnologie - Trends und aktuelle Entwicklungen. Friesenbichler, W. & Berger, G. R. (eds.). Leoben: Eigenverlag, Vol. 7. p. 265-266
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Verarbeitung von Verbundwerkstoffen
Schledjewski, R. & Fauster, E., Apr 2017.
Research output: Contribution to conference › Poster › Transfer
Published
Flüssigimprägnierung von Naturfasertextilien im Vergleich mit synthetischen Faserverstärkungen
Blößl, Y. & Schledjewski, R., 24 Mar 2017.
Research output: Contribution to conference › Abstract › peer-review
Published
Hybride Verbundwerkstoffe: Potenziale und Herausforderungen
Hergan, P., Fauster, E., Stelzer, S., Pinter, G. & Schledjewski, R., 24 Mar 2017.
Research output: Contribution to conference › Abstract › peer-review
Published
Comparative study of optimization in pultrusion with pre-heating and die-cooler temperature for improved cure
Costa Dias, R. D. C., de Sousa Santos, L. & Schledjewski, R., 1 Jan 2017, THERMEC 2016. Ionescu, M., Mishra, B., Kozeschnik, E., Sommitsch, C., Chandra, T. & Mishra, B. (eds.). Trans Tech Publications, p. 402-407 6 p. (Materials Science Forum; vol. 879).
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Delamination properties of hybrid steel- carbon composite materials produced via resin transfer molding
Stelzer, S., Brandstetter, D., Hergan, P., Fauster, E. & Pinter, G. G., 2017.
Research output: Contribution to conference › Poster › Research › peer-review
Published
Design and manufacturing of high performance green composites based on renewable materials
Resch-Fauster, K., Klein, A., Lloret Pertegas, S. & Schledjewski, R., 2017, Handbook of Composites from Renewable Materials, Vol. 2, Design and Manufacturing. Wiley-VCH , p. 1-24
Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research
Published
Design of Experiments Versuche an Hybridplatten – Betrachtung der Phänomene des RTM-Prozesses
Beter, J., 2017
Research output: Thesis › Master's Thesis
Published
In-Plane Permeability Characterization of Reinforcing Fabrics Based on Radial-Flow Experiments: Comparative Studies
Fauster, E., 2017.
Research output: Contribution to conference › Presentation › Research
Published
Modell-Basierte FKV-Verarbeitungstechnik an Beispielen der Flüssigimprägnierverfahren
Fauster, E., Hergan, P., Thirunavukkarasu, J., Vilaca Lourenco, G. & Schledjewski, R., 2017, Tagungsband zum 26. Leobener Kunststoff-Kolloquium: Innovative Spritzgiesstechnologie - Trends und aktuelle Entwicklungen.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Optimierung des Schlauchblas-RTM-Verfahrens zur effizienten Fertigung von endlosfaserverstärkten Hohlkörperstrukturen
Schillfahrt, C., 2017
Research output: Thesis › Doctoral Thesis
Published
Technisch - wirtschaftlicher Vergleich von Perforierprozessen zur Herstellung schallreduzierender Composite - Luftfahrtbauteile
Ringl, S., 2017
Research output: Thesis › Master's Thesis
2016
Published
Untersuchung des Drapier- und Infiltrationsverhaltens von Rundgeflechten für die Herstellung endlosfaserverstärkter Hohlkörperstrukturen
Schillfahrt, C., 4 Nov 2016.
Research output: Contribution to conference › Presentation › Research
Published
Liquid Composite Molding: A widely used group of FRPC processing techniques, but still a challenging topic
Schledjewski, R. & Grössing, H., 1 Nov 2016, Materials Science Forum. Vol. 879. 6 p.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Epoxy/glass fibres laminates with integrated layer of carbon tubes decorated by Ag clusters for deformation detection
Lloret Pertegas, S., Matyas, J., Olejnik, R., Slobodian, P. & Schledjewski, R., Nov 2016.
Research output: Contribution to conference › Paper
Published
Model based processing as possibility for quality assured manufacturing with ARTM
Schledjewski, R., Hergan, P. & Fauster, E., 27 Oct 2016.
Research output: Contribution to conference › Presentation › Research
Published
Identification of the effect of typical curvatures encountered in RTM parts on localized permeability of fibrous preforms
Konstantopoulos, S., Hueber, C., Mühlbachler, E. & Schledjewski, R., 20 Sept 2016, In: Advanced Manufacturing: Polymer and Composites Science. 2.2016, 2, p. 57-66 10 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Nanostructured CNT based sensing films used in multi-functional hybrid composites
Schledjewski, R., Lloret Pertegas, S., Matyas, J., Olejnik, R. & Slobodian, P., 15 Sept 2016.
Research output: Contribution to conference › Presentation › Research
Published
Study on parameters affecting the mechanical properties of dry fiber bundles during continuous composite manufacturing processes
Schledjewski, R. & Maier, A., 9 Sept 2016, IOP Conference Series: Materials Science and Engineering. Vol. 139(1). 8 p.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Study on parameters affecting the mechanical properties of dry fiber bundles during continuous composite manufacturing processes
Schledjewski, R. & Maier, A., 5 Sept 2016.
Research output: Contribution to conference › Presentation › Research
Published
ROBUST OPTICAL 2D PERMEABILITY CHARACTERIZATION OF REINFORCING FABRICS
Fauster, E., 29 Jun 2016.
Research output: Contribution to conference › Presentation › Research
Published
Assessing the reliability of filling simulations for RTM: Critical comparison of actual matrix arrival times with simulation predictions
Schledjewski, R. & Konstantopoulos, S., 28 Jun 2016.
Research output: Contribution to conference › Presentation › Research
Published
BOTTOM-UP PARAMETRIC HYBRID COST ESTIMATION FOR COMPOSITE AEROSPACE PRODUCTION
Hueber, C., 27 Jun 2016.
Research output: Contribution to conference › Presentation › Research
Published
Assessing the reliability of filling simulations for RTM: Critical comparison of actual matrix arrival times with simulation predictions
Konstantopoulos, S. & Schledjewski, R., 26 Jun 2016, Proceedings of the 17th European Conference on Composite Materials (ECCM17).
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Automated tape laying (ATL) process simulation through 3d thermos-mechanical model
Schledjewski, R., Satheesh, B. & Duplesis Kergomard, Y., 26 Jun 2016, Proceedings of the 17th European Conference on Composite Materials (ECCM17).
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Improved cure simulation in pultrusion process about heating systems: A case study
Costa Dias, R. D. C., Santos, L. S. & Schledjewski, R., 26 Jun 2016, Proceedings of the 17th European Conference on Composite Materials (ECCM17).
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
ROBUST OPTICAL 2D PERMEABILITY CHARACTERIZATION OF REINFORCING FABRICS
Fauster, E., Grössing, H., Fellner, K. & Schledjewski, R., 26 Jun 2016, Proceedings of the 17th European Conference on Composite Materials (ECCM17).
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Hybrid structures manufactured by using thermoplastic tape placement for local reinforcement build-up
Schledjewski, R., Satheesh, B. & Duplessis Kergomard, Y., 23 Jun 2016.
Research output: Contribution to conference › Presentation › Research
Published
Liquid Composite Molding: A widely used group of FRPC processing techniques, but still a challenging topic
Schledjewski, R. & Grössing, H., 3 Jun 2016.
Research output: Contribution to conference › Presentation › Research
Published
An evaluation of the reproducibility of ultrasonic sensor-based out-of-plane permeability measurements: a benchmarking study
Becker, D., Grössing, H., Konstantopoulos, S., Fauster, E., Mitschang, P. & Schledjewski, R., 1 Jun 2016, In: Advanced Manufacturing: Polymer and Composites Science. 2.2016, 1, p. 34-45 12 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Review of cost estimation: methods and models for aerospace composite manufacturing
Hueber, C., Horejsi, K. & Schledjewski, R., 1 Jun 2016, In: Advanced Manufacturing: Polymer and Composites Science. 2.2016, 1, p. 1-13 13 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
BOTTOM-UP PARAMETRIC HYBRID COST ESTIMATION FOR COMPOSITE AEROSPACE PRODUCTION
Hueber, C., Horejsi, K. & Schledjewski, R., Jun 2016, Proceeding of the 17th European Conference on Composite Materials. Munich/ Germany
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Green Composites: Challenges to reach high performance components
Lloret Pertegas, S., Anusic, A., Resch-Fauster, K. & Schledjewski, R., Jun 2016.
Research output: Contribution to conference › Paper
Published
Green Composites: Challenges to reach high performance components
Lloret Pertegas, S., Jun 2016.
Research output: Contribution to conference › Poster › Research
Published
HybridRTM - Quality Controlled Manufacturing of Hybrid Material Composites through Resin Transfer Moulding
Fauster, E., 21 Apr 2016.
Research output: Contribution to conference › Presentation › Research
Published
HybridRTM - Quality Controlled Manufacturing of Hybrid Material Composites through Resin Transfer Moulding
Fauster, E., Hergan, P. & Schledjewski, R., 20 Apr 2016, Proceedings of Euro Hybrid 2: Materials and Structures 2016. 4 p.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Automated profile preforming for structural components
Fauster, E., Schillfahrt, C., Hueber, C. & Schledjewski, R., 19 Apr 2016, In: Science and Engineering of Composite Materials. 24.2016, 5, p. 631-650 20 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Assessing the reliability of filling simulations for RTM: Critical comparison of theoretical and realistic permeability of typical curvatures encountered in RTM preforms
Konstantopoulos, S. & Schledjewski, R., 1 Jan 2016, ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials. (ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials).
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Bottom-up parametric hybrid cost estimation for composite aerospace production
Hueber, C., Horejsi, K. & Schledjewski, R., 1 Jan 2016, ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials. (ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials).
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
A model-based concept for an optimized resin transfer moulding process
Hergan, P., Fauster, E. & Schledjewski, R., 2016, Proceedings of the 17th European Conference on Composite Materials (ECCM17).
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Development and implementation of sensing applications for fiber reinforced polymeric composites
Konstantopoulos, S., 2016
Research output: Thesis › Doctoral Thesis
Published
Epoxy/glass fibres laminates with integrated layer of carbon tubes decorated by Ag clusters for deformation detection
Lloret Pertegas, S., 2016.
Research output: Contribution to conference › Presentation › Research
Published
Optimisation of the winding process by minimizing the critical failure potential during fibre roving delivery
Maier, A., 2016
Research output: Thesis › Doctoral Thesis
Published
Vacuum infusion composite manufacturing using integrated carbon nanotubes sensor
Lloret Pertegas, S., Matyas, J., Slobodian, P. & Schledjewski, R., 2016.
Research output: Contribution to conference › Paper
Published
Vacuum infusion composite manufacturing using integrated carbon nanotubes sensor
Lloret Pertegas, S., 2016.
Research output: Contribution to conference › Poster › Research
2015
E-pub ahead of print
Compaction behavior of continuous carbon fiber tows: an experimental analysis
Kastanis, D., Steiner, H., Fauster, E. & Schledjewski, R., 12 Nov 2015, (E-pub ahead of print) In: Advanced Manufacturing: Polymer and Composites Science. 1.2015, 3, p. 169-174 6 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Accurate, Reproducible and Robust In-Plane Permeability Characterization with a Low-Budget Test Rig: A Challenge or Straightforward?
Grössing, H., Fauster, E. & Schledjewski, R., 29 Oct 2015, SAMPE CAMX, Dallas, Tx, USA, 26.-29.10.2015.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Automatisierte Prozessführung und Qualitätskontrolle in der FKV-Verarbeitung
Fauster, E., 16 Oct 2015.
Research output: Contribution to conference › Presentation › Research
Published
Hocheffiziente Prozesse: Materialverständnis und Automation als SchlüsselelementeEine Fallbetrachtung
Schledjewski, R., 16 Oct 2015.
Research output: Contribution to conference › Presentation › Transfer
Published
Utilizing Fused Deposition Modeling Techniques in Composite Processing
Tonejc, M., Grössing, H., Habicher, M., Fauster, E. & Schledjewski, R., 24 Sept 2015, Proceedings Polymer Processing Society Conference.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Utilizing Fused Deposition Modeling Techniques in Composite Processing
Tonejc, M., 24 Sept 2015.
Research output: Contribution to conference › Presentation › Research
Published
Fibre length influence and filaments interaction on single and multifilaments
Maier, A., 8 Sept 2015, Book of Abstracts.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
A study on the length effect influencing the mechanical strength of glass fibre filaments
Maier, A., 24 Jul 2015, ICCM20 Proceedings.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
A Comparison of Two Measurement Techniques for Determining the 2D Permeability Characteristics of Reinforcing Textiles
Fauster, E., 23 Jul 2015.
Research output: Contribution to conference › Presentation › Research
Published
Optical Permeability Measurement on Tubular Braided Reinforcing Textiles
Schillfahrt, C., 22 Jul 2015.
Research output: Contribution to conference › Presentation › Research › peer-review
Published
Optical Permeability Measurement on Tubular Braided Reinforcing Textiles
Schillfahrt, C., Fauster, E. & Schledjewski, R., Jul 2015, Proceedings of the 20th International Conference on Composite Materials. 12 p. 3406-2
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Automated Composite Manufacturing by Means of Model Based Process Control
Schledjewski, R. & Fauster, E., 24 Jun 2015.
Research output: Contribution to conference › Poster › Research
Published
Integrated Process Development as a Basis of Highly Efficient FRPC-Processing
Schledjewski, R., 12 Jun 2015.
Research output: Contribution to conference › Presentation › Research
Published
Flow Front Advancement during Composite Processing: Predictions from Numerical Filling Simulation Tools in Comparison with Real-World Experiments
Grössing, H., Fauster, E., Schledjewski, R., Stadlmajer, N. & Fleischmann, M., 5 May 2015, In: Polymer Composites. p. 1-12 DOI 10.1002/pc.23474.
Research output: Contribution to journal › Article › Research › peer-review
Published
Efficient Manufacturing of Aeronautic CFRP-Structures through Automated Profile Preforming
Fauster, E., 24 Apr 2015.
Research output: Contribution to conference › Presentation › Research › peer-review
Published
Efficient Manufacturing of Aeronautic CFRP-Structures through Automated Profile Preforming
Fauster, E., Schillfahrt, C. & Schledjewski, R., 23 Apr 2015.
Research output: Contribution to conference › Abstract › peer-review
Published
Numerical Filling Predictions and Mechanical Mould Simulations for Composite Manufacturing Techniques
Grössing, H., Konstantopoulos, S. & Schledjewski, R., 17 Apr 2015, ESAFORM 2015, Graz, Österreich, 15.-17.04.2015.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Forming of fiber reinforced polymers
Schledjewski, R., 16 Apr 2015.
Research output: Contribution to conference › Presentation › Research
Published
Einfluss des Längeneffekt auf die mechanischen Eigenschaften von trockenen E-Glasfasern
Maier, A., 6 Mar 2015, 4a Technologietag "Leichtbau und Composites" 2015 Proceedings .
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
splineTEX - Industrielle Fertigung von gekrümmten Faserverbundrohren durch Einsatz von Flüssigimprägnierverfahren
Schillfahrt, C., 6 Mar 2015.
Research output: Contribution to conference › Presentation › Research › peer-review
Published
splineTEX - Industrielle Fertigung von gekrümmten Faserverbundrohren durch Einsatz von Flüssigimprägnierverfahren
Schillfahrt, C., Fauster, E., Schledjewski, R., Troi, V. & Schennach, O., 6 Mar 2015.
Research output: Contribution to conference › Paper › peer-review
Published
Material performance under in situ consolidation conditions during continuous placement processing
Schledjewski, R., Satheesh, B. & Tonejc, M., 4 Feb 2015.
Research output: Contribution to conference › Presentation › Research
Published
Influence of Textile Parameters on the Preform In-Plane Permeability Characteristics of Non-Crimp Fabric Preforms
Grössing, H., Fauster, E., Schledjewski, R. & Weninger, M., 1 Feb 2015, In: Polymer Composites. p. 1-10 DOI 10.1002/pc.23360.
Research output: Contribution to journal › Article › Research › peer-review
E-pub ahead of print
Influence of textile parameters on the in-plane permeability characteristics of non-crimped fabric preforms
Grössing, H., Fauster, E., Weninger, M. & Schledjewski, R., 23 Jan 2015, (E-pub ahead of print) In: Polymer Composites. 37.2016, 6, p. 1854-1863 10 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Automated Profile Preforming for Aerospace Applications
Schillfahrt, C., Fauster, E. & Schledjewski, R., Jan 2015, In: JEC Composites Magazine. 94, p. 43-45 3 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Accurate, reproducible and robust in-plane permeability characterization with a lowbudget test rig: A challenge or straightforward?
Grössing, H., Fauster, E. & Schledjewski, R., 2015, p. 267-283. 17 p.
Research output: Contribution to conference › Paper › peer-review
Published
A Comparison of two Measurement Techniques for Determining the 2D Permeability Characteristics of Reinforcing Textiles
Fauster, E., Grössing, H. & Schledjewski, R., 2015, Proceedings of the 20th International Conference of Composite Materials.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
An Evaluation of the Reproducibility of Capacitive Sensor Based In-Plane Permeability Measurements: A Benchmarking Study
Grössing, H., Schledjewski, R., Kaufmann, S., Mitschang, P. & Becker, D., 2015, In: Express Polymer Letters. 9, p. 129-142
Research output: Contribution to journal › Article › Research › peer-review
Published
A Study on Geometrical Parameters Influencing the Mechanical Spreading of Fibre Bundles
Tonejc, M., Steiner, H., Fauster, E., Konstantopoulos, S. & Schledjewski, R., 2015, Proceedings of the 20th International Conference of Composite Materials.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Contributing to the Optimization of the Preform LCM Process Chain: Permeability of Reinforcing Textiles
Grössing, H., 2015
Research output: Thesis › Doctoral Thesis
Published
Enabling RTM processing of components with varying wall thickness: Accurate transverse Permeability measurements under unsaturated flow conditions
Konstantopoulos, S., Hergan, P., Grössing, H. & Schledjewski, R., 2015.
Research output: Contribution to conference › Paper › peer-review
Published
Exploiting temperature measurements for cure monitoring of FRP composites. Applications with thermocouples and Infrared thermography
Konstantopoulos, S., Tonejc, M., Maier, A. & Schledjewski, R., 2015, In: Journal of Reinforced Plastics and Composites. 34, 12, p. 1015 1026 p.
Research output: Contribution to journal › Article › Research › peer-review
Published
Influence of Test Rig Configuation and Evaluation Algorithms on Optical Radial-Flow Permeability Measurement: A Benchmark Exercise
Berg, D. C., Fauster, E., Abliz, D., Grössing, H., Meiners, D., Schledjewski, R. & Ziegmann, G., 2015, Proceedings of the 20th International Conference of Composite Materials.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Influence of test rig configuration and evaluation algorithms on optical radial-flow permeability measurement: A benchmark exercise
Berg, D. C., Fauster, E., Abliz, D., Grössing, H., Meiners, D., Schledjewski, R. & Ziegmann, G., 2015.
Research output: Contribution to conference › Paper › peer-review
Published
Kompaktierungsverhalten kontinuierlicher Faserbündel
Steiner, H., 2015
Research output: Thesis › Master's Thesis
Published
Konsolidierung thermoplastischer Verbundwerkstoffe – Phänomene, Modellvorstellungen und Vorhersagefähigkeit
Moser, M., 2015
Research output: Thesis › Master's Thesis
Published
Konstruktive Auslegung und Umsetzung eines 3D Permeameters
Hergan, P., 2015
Research output: Thesis › Master's Thesis
Published
Numerical Filling Predictions and Mechanical Mold Simulations for Composite Manufacturing Techniques: RTM Tool Development
Grössing, H., Konstantopoulos, S. & Schledjewski, R., 2015, Key engineering materials. Vol. 651-653. p. 423-432 (Key engineering materials).
Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research
2014
Published
Effiziente Verarbeitung von Luftfahrt-Strukturbauteilen durch Einsatz automatisierter Profil-Preformfertigung
Schillfahrt, C., 13 Nov 2014.
Research output: Contribution to conference › Presentation › Research › peer-review
Published
Smart Composite Tubes – Series Production of 3D Curved Hollow CFRP-Tubes
Schillfahrt, C., 10 Mar 2014.
Research output: Contribution to conference › Presentation › Research › peer-review
Published
23. Leobener Kunststoff-Kolloquium - Hocheffiziente Verbundwerkstoffe
Schledjewski, R. (Editor), 2014, 23. Leobener Kunststoff-Kolloquium - Hocheffiziente Verbundwerkstoffe. Eigenverlag, (Schriftenreihe Kunststofftechnik Leoben; vol. 4).
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
2D Permeabilitätsbestimmung von flächigen technischen Textilien
Grössing, H., 2014.
Research output: Contribution to conference › Poster › Research › peer-review
Published
Additive Manufacturing mittels Legetechnik
Tonejc, M., 2014.
Research output: Contribution to conference › Poster › Research › peer-review
Published
Automated Preforming of Profiles for Efficient LCM-Processing of Structural Components in Aeronautic Applications
Fauster, E., Schillfahrt, C. & Schledjewski, R., 2014, Proceedings of Reinforced Plastics 2014 International BALATON Conference. p. 1-1
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Automatisierte Legeverfahren
Schledjewski, R., 2014, Handbuch Faserverbundkunststoffe/Composites – Grundlagen, Verarbeitung, Anwendungen. p. 233-236
Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research
Published
Bearbeitung, Oberflächenbehandlung
Schledjewski, R., Blinzler, M. & Hildebrandt, K., 2014, Handbuch Verbundwerkstoffe: Werkstoffe, Verarbeitung, Anwendung. p. 433-453
Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research
Published
Christian Doppler Laboratory for High Efficient Composite Processing
Schledjewski, R., Grössing, H., Konstantopoulos, S., Hueber, C. & Tonejc, M., 2014, In: Berg- und hüttenmännische Monatshefte : BHM. p. 1-9
Research output: Contribution to journal › Article › Research › peer-review
Published
Comparison of Algorithms for 2D Anisotropic Permeability Calculation in Terms of Uncertainty Propagation
Fauster, E., Grössing, H. & Schledjewski, R., 2014, Proceedings of the 16th European Conference on Composite Materials. p. 1-8
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
CONTINUOUS ON-LINE ANALYSIS OF THE MATRIX FLOW THROUGH MANIPULATED RTM PREFORMS COMPARED TO NUMERICAL FILLING SIMULATIONS
Grössing, H., Schledjewski, R. & Kaufmann, S., 2014, SAMPE Tech US 2014. p. 1-14
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Defect depth determination in a CFRP structure using TSR technique
Oswald-Tranta, B., Maier, A. & Schledjewski, R., 2014
Research output: Non-textual form › Web publication/site › Research
Published
Effiziente Verarbeitung von Luftfahrt-Strukturbauteilen durch Einsatz automatisierter Profil-Preformfertigung
Schillfahrt, C., Fauster, E. & Schledjewski, R., 2014, 23. Leobener Kunststoff-Kolloquium: Hocheffiziente Verbundwerkstoffe. Schledjewski, R. (ed.). Eigenverlag, p. 29-39 10 p. (Schriftenreihe Kunststofftechnik Leoben; vol. 4).
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Einfluss textiler Parameter auf das Drapierverhalten von flächigen technischen Textilien
Weisser, T., 2014, 115 p.
Research output: Thesis › Master's Thesis
Published
Experimentelle Untersuchung der maximalen Verarbeitungsgeschwindigkeit einer geschlossenen Imprägniereinheit anhand der Abhängigkeit zwischen Imprägniergeschwindigkeit und Imprägnierdruck
Maier, A., 2014, Tagungsband zum 23. Leobener Kunststoff-Kolloquium. p. XXX-XXX
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Experimentelle Untersuchung der maximalen Verarbeitungsgeschwindigkeit einer selbst- designten geschlossenen Imprägniereinheit
Maier, A., 2014.
Research output: Contribution to conference › Poster › Research › peer-review
Published
FRP parts in aircraft development: design-to-cost approaches
Horejsi, K. & Schledjewski, R., 2014, Proceedings of THE 22ND ANNUAL INTERNATIONAL CONFERENCE ON COMPOSITE ENGINEERING. p. 1-2
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Ganzheitliche Prozessentwicklung im Bereich der Legetechnik
Tonejc, M., Pazour, P., Fauster, E. & Schledjewski, R., 2014, Schriftenreihe Kunststofftechnik Leoben. p. 17-27
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Ganzheitliche Prozessentwicklung im Bereich der Legetechnik
Tonejc, M., 2014.
Research output: Contribution to conference › Presentation › Research
Published
Glass Covered Magnetic Micro-Wires Operating in the Domain Wall Nucleation and Propagation Sensing Mode for Stress Detection in FRP Composite Structures
Konstantopoulos, S., Potirakis, S., Christopoulos, A., Schledjewski, R. & Hristoforou, E., 2014, In: Sensor Letters. 12
Research output: Contribution to journal › Article › Research › peer-review
Published
Impregnation Mechanisms of Fiber Reinforced Polymer Composites
Kastanis, D., 2014.
Research output: Contribution to conference › Poster › Research › peer-review
Published
Kontinuierliches Schweißen unidirektional faserverstärkter Tapes – Wie kann die Bindungsqualität bewertet werden?
Schledjewski, R., 2014, Online Proceedings 4a Technologietag 2014. p. 1-7
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Kosteneffiziente Verbundbauteilgestaltung in der Luftfahrt – Methoden und Modelle zur Kostenschätzung
Hueber, C., Horejsi, K. & Schledjewski, R., 2014, 23. Leobener Kunststoff-Kolloquium : 13. - 14. November 2014. Schledjewski, R. (ed.). p. 155-167 (Schriftenreihe Kunststofftechnik Leoben; vol. 4).
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Kritische Betrachtung von LCM Füllsimulationen: Abgleich des realen Prozesses mit numerischen Vorhersagen
Grössing, H., Schledjewski, R., Stadlmajer, N. & Fleischmann, M., 2014, 23. Leobener Kunststoff-Kolloquium: Hocheffiziente Verbundwerkstoffe. p. 7-16
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Materialhybride lokale Bauteilverstärkung – Chancen und Herausforderungen
Schledjewski, R., 2014, 23. Leobener Kunststoff-Kolloquium - Hocheffiziente Verbundwerkstoffe. p. 193-200
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Materialhybride lokale Bauteilverstärkung – Chancen und Herausforderungen
Schledjewski, R., 2014.
Research output: Contribution to conference › Poster › Research › peer-review
Published
Mechanical influence on dry glass fibres during manufacturing
Maier, A., 2014.
Research output: Contribution to conference › Poster › Research › peer-review
Published
Monitoring the production of FRP composites: A review of in-line sensing methods
Konstantopoulos, S., Fauster, E. & Schledjewski, R., 2014, In: Express Polymer Letters. 8, p. 823-840
Research output: Contribution to journal › Article › Research › peer-review
Published
Optische Messtechnik zur Charakterisierung von textilen Verstärkungsstrukturen
Fauster, E., 2014.
Research output: Contribution to conference › Poster › Research › peer-review
Published
Prepregs
Schledjewski, R., 2014, Handbuch Faserverbundkunststoffe/Composites – Grundlagen, Verarbeitung, Anwendungen. p. 492-495
Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research
Published
Production method evaluation for large cylindrical composite parts under a cost perspective
Horejsi, K., Schneiderbauer, G., Tauchner, J., Schledjewski, R. & Noisternig, J., 2014, Proceedings of the16th European Conference on Composite Materials. p. 1-6
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Prozessbasierte Kennwertermittlung (Permeabilität) mit anschließenden RTM-Versuchen manipulierter Preforms
Kaufmann, S., 2014, 117 p.
Research output: Thesis › Master's Thesis
Published
Pultrusionsverfahren
Schledjewski, R., Friedrich, K. & Wiedmer, S., 2014, Handbuch Verbundwerkstoffe: Werkstoffe, Verarbeitung, Anwendung. p. 317-323
Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research
Published
Smart Composite Tubes – Series Production of 3D Curved Hollow CFRP Tubes
Schillfahrt, C., Schledjewski, R., Troi, V. & Schennach, O., 2014, 35th SAMPE Europe International Technical Conference (SEICO14). p. 94-100 7 p. P 23
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Using Glass Covered Magnetic Micro-Wire Composites in Fiber Reinforced Polymeric Composites for Aeronautical Applications
Konstantopoulos, S., Christopoulos, A., Schledjewski, R. & Hristoforou, E., 2014, In: Sensor Letters. 12
Research output: Contribution to journal › Article › Research › peer-review
Published
Wickel- und Tapelegetechnik
Schledjewski, R., Schlottermüller, M., Neitzel, M., Beresheim, G., Mack, J. & Brzeski, M., 2014, Handbuch Verbundwerkstoffe: Werkstoffe, Verarbeitung, Anwendung. p. 325-355
Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research
Published
Wirtschaftlichkeitesbetrachtungen zur Herstellung von Bauteilen aus Hochleistungsverbundwerkstoffen
Hueber, C., 2014.
Research output: Contribution to conference › Poster › Research › peer-review
2013
Published
Accurate 2d permeability measurement: Optical permeability characterization
Grössing, H., Fauster, E. & Schledjewski, R., 2013, Novel Aspects in Composite Technologies: from Fibre to lightweight Structures. p. 34-40
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
An adaptive modular monitoring & control system for composites manufacturing processes
Konstantopoulos, S., Fauster, E. & Schledjewski, R., 2013, Processing of fibre composites - challenges for maximum materials performance. p. 261-271
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Cost-based process selection for CFRP aerospace parts
Horejsi, K., Noisternig, J., Koch, O. & Schledjewski, R., 2013, In: JEC Composites Magazine. 81, May-June, p. 60-62
Research output: Contribution to journal › Article › Research › peer-review
Published
Cost-based process selection for CFRP aerospace parts
Horejsi, K., Noisternig, J., Koch, O. & Schledjewski, R., 2013.
Research output: Contribution to conference › Poster › Research › peer-review
Published
Cost-saving potentials for CFRP parts in early design stages
Horejsi, K., Noisternig, J., Koch, O. & Schledjewski, R., 2013, Composite Materials: The great advance. p. 8439-8446
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Cost-saving potentials for CFRP parts in early design stages
Horejsi, K., Noisternig, J., Koch, O. & Schledjewski, R., 2013.
Research output: Contribution to conference › Poster › Research › peer-review
Published
CULT – Hybrider Leichtbau mit ganzheitlichem Ansatz am Beispiel “CULT” (Cars’ Ultra Light Technologies)
Schledjewski, R., 2013, In: Carbon-Composites-Magazin : die Mitgliederzeitschrift des CCeV. 2013, 2, p. 85-85
Research output: Contribution to journal › Article › Research › peer-review
Published
Entwicklung eines Serienfertigungskonzepts für GFK-Schlaufen mit den Anforderungen an hohe Stückzahlen in der Bauindustrie
Dietrich, A. M., 2013
Research output: Thesis › Master's Thesis
Published
Entwurf und Konstruktion eines Thermoplast-Tapelegekopfes
Pazour, P., 2013, 94 p.
Research output: Thesis › Master's Thesis
Published
Herausforderungen und Lösungsansätze für die Entwicklung einer RTM-Prozessroutine
Pühringer, F., 2013, 134 p.
Research output: Thesis › Master's Thesis
Published
High efficient composite processing
Schledjewski, R., 2013, ICSAAM 2013. p. 1-8
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
In-line cure monitoring of composite materials based on kinetic model analysis assisted by thermal sensing
Konstantopoulos, S., Tonejc, M., Fauster, E. & Schledjewski, R., 2013, Proceedings of the 5th ICSAAM. p. -
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Konzept zur Automatisierung eines Thermoplast-Tapelegekopfes
Tonejc, M., 2013
Research output: Thesis › Master's Thesis
Published
Mechanical Dispersion Methods for Carbon Nanotubes in Aerospace Composite Matrix Systems
Grishchuk, S. & Schledjewski, R., 2013, Carbon Nanotube Enhanced Aerospace Composite Materials. p. 99-154
Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research
Published
Moulds for continuous fiber reinforced polymer Composites
Schledjewski, R., 2013, Mould-Making Handbook. p. 200-239
Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research
Published
Multifunktionale Oberflächen und Grenzflächen in Verbundwerkstoffen: Online Erfassung von Kompaktierung, Imprägnierung und Aushärtegrad
Kastanis, D. & Schledjewski, R., 2013, 22. Leobener Kunststoff-Kolloquium „Oberflächen und Grenzflächen in der Polymertechnologie“. p. 168-174
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Optical permeability measurement of NCF: Influence of material properties on the 2d preform permeability
Grössing, H. & Schledjewski, R., 2013, Composite Materials: The great advance. p. 5802-5809
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Parametric study on processing parameters and resulting part quality through thermoplastic placement process
Khan, M. A., Mitschang, P. & Schledjewski, R., 2013, In: Journal of composite materials. 47, p. 485-499
Research output: Contribution to journal › Article › Research › peer-review
Published
Pulver In-Mould Coating von CFK-Bauteilen für die Anwendung als Automobile Außenteile
Hueber, C., 2013
Research output: Thesis › Master's Thesis
Published
Report on suitable production processes of composite crash system
Kastanis, D., 2013
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Report on suitable production processes of composite underbody structure
Kastanis, D., 2013
Research output: Book/Report › Commissioned report › Transfer › peer-review
Published
Statistical Uncertainty Analysis of Material and Measurement Parameters for Optical Permeability Determination
Fauster, E., Grössing, H. & Schledjewski, R., 2013, Proceedings of CompositesWeek@Leuven. p. --8
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Statistical Uncertainty Analysis of Material and Measurement Parameters for Optical Permeability Determination
Fauster, E., Grössing, H. & Schledjewski, R., 2013.
Research output: Contribution to conference › Poster › Research › peer-review
Published
Thermal degradation analysis of short-time heated polymers
Bayerl, T., Brzeski, M., Martínez-Tafalla, M., Schledjewski, R. & Mitschang, P., 2013, In: Journal of thermoplastic composite materials. p. 1-26
Research output: Contribution to journal › Article › Research › peer-review
Published
Uncertainty analysis for optical permeability measurement of reinforcing textiles
Fauster, E., Grössing, H. & Schledjewski, R., 2013, Composite Materials: The great advance. p. 4685-4694
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
2012
Published
Influence of fiber placement and architecture on fracture mechanical properties of carbon fiber reinforced composites
Stelzer, S., Schillfahrt, C., Wolfahrt, M., Pinter, G., Noisternig, J. & Frieß, S., 24 May 2012.
Research output: Contribution to conference › Presentation › Research
Published
A Model-Based Processing Concept for Thermoplastic Tape Placement
Fauster, E. & Schledjewski, R., 2012, SAMPE 2012 Technical Conference Proceedings: Connecting the Advanced Materials Community. p. --8
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
A Modular Model-Based Processing Concept for an Optimized Pultrusion Process Management
Fauster, E., Kastanis, D. & Schledjewski, R., 2012, Proceedings of ECCM 15. p. --8
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Bestimmung der Permeabilität von flächigen Faserhalbzeugen
Grössing, H., 2012, 79 p.
Research output: Thesis › Master's Thesis
Published
CFD Simulations of a hot gas torch for the thermoplastic tape placement process
Narnhofer, M., Pazour, P. & Schledjewski, R., 2012, Proceedings of ECCM 15. p. 1-7
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
COMPARISON OF PERMEABILITY MEASUREMENTS OF SEVERAL FIBRE TEXTILES USING DIFFERENT MEASUREMENT METHODS
Grössing, H., Wolfahrt, M., Müller, A. & Schledjewski, R., 2012, Proceedings of ECCM 15. p. 1-8
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Determination of the orthotropic material properties of individual layers of printed circuit boards
Fuchs, P. F., Pinter, G. & Tonejc, M., 2012, In: Microelectronics Reliability. 52, 11, p. 2723-2730
Research output: Contribution to journal › Article › Research › peer-review
Published
Filament winding process in thermoplastics
Schledjewski, R., 2012, Manufacturing techniques for polymer matrix composite (PMCs). p. 182-208
Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research
Published
Induction heating of thermoplastic materials by particulate heating promoters
Bayerl, T., Schledjewski, R. & Mitschang, P., 2012, In: Polymers & Polymer Composites (Polymers and polymer composites). 20, p. 333-342
Research output: Contribution to journal › Article › Research › peer-review
Published
Modell-basierte Verarbeitung von Faser-Kunststoff-Verbunden
Fauster, E., 2012.
Research output: Contribution to conference › Poster › Research › peer-review
Published
Montanuniversität Leoben: Kolloquium Polymerer Leichtbau
Schledjewski, R., 2012, In: Österreichische Kunststoff-Zeitschrift. p. 50-51
Research output: Contribution to journal › Article › Research › peer-review
Published
Montanuniversität Leoben: Leichtbau mit polymeren Verbundwerkstoffen in der Umsetzung
Schledjewski, R., 2012, In: News / Carbon Composites e.V.. 11, p. 25-25
Research output: Contribution to journal › Article › Research › peer-review
Published
PROCESS SELECTION OPTIMIZATION OF CFRP PARTS IN THE AEROSPACE INDUSTRY
Horejsi, K., Noisternig, J., Koch, O. & Schledjewski, R., 2012, Proceedings of ECCM 15. p. 1-7
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Simulation des Tapelegeprozesses mit thermoplastischen Matrixmaterialien
Narnhofer, M., 2012.
Research output: Contribution to conference › Poster › Research › peer-review
Published
Simulation of materials behaviour during in-situ consolidation using continuous welding processes like thermoplastic tape placement
Schledjewski, R., Khan, M. A. & Mitschang, P., 2012, Proceedings ECCOMAS2012. p. 4298-4307
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Simulation of the thermoplastic tape placement
Maurer, D., Khan, M. A., Mitschang, P. & Schledjewski, R., 2012, Proceedings 4th European Conference on Materials and Structures in Aerospace – EUCOMAS 2012. p. 1-28
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Verarbeitung von Verbundwerkstoffen
Schledjewski, R., 2012.
Research output: Contribution to conference › Poster › Research › peer-review
Published
Vielfältige Möglichkeiten und immer noch große Herausforderungen
Schledjewski, R., 2012, In: KC-aktuell (Informationen aus dem Kunstoff-Cluster). p. 2-4
Research output: Contribution to journal › Article › Research › peer-review
2011
Published
Schadenstoleranz und interlaminares Risswachstum in Hochleistungsfaserverbundwerkstoffen
Stelzer, S., Schillfahrt, C., Wolfahrt, M. & Pinter, G., 10 Nov 2011.
Research output: Contribution to conference › Presentation › Research
Published
20. Leobener Kunststoff-Kolloquium - Polymerer Leichtbau
Schledjewski, R. (Editor), 2011, Leoben: Eigenverlag. (Schriftenreihe Kunststofftechnik Leoben; vol. 1)
Research output: Book/Report › Book › Research
Published
Controlled influence of component properties using hybrid techniques by combining different lightweight structures
Holschuh, R., Mitschang, P. & Schledjewski, R., 2011, Proc. 18th International Conference on Composite Materials (ICCM). p. 1-6
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Cost comparison of different thermoplastic and thermoset filament winding processes
Mack, J., Schledjewski, R. & Mitschang, P., 2011, SAMPE International Symposium Proceedings. p. 1-12
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Duromere Faserverbundstrukturen in der Großserie
Kastanis, D. & Schledjewski, R., 2011, 20. Leobener Kunststoff-Kolloquium - Polymerer Leichtbau. p. 199-203
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Duromere Faserverbundstrukturen in der Großserie
Kastanis, D. & Schledjewski, R., 2011.
Research output: Contribution to conference › Poster › Research › peer-review
Published
Future Fusion
Schledjewski, R., 2011, In: Public service review: European science & technology : an independent reviewPublic Service Review. p. 36-36
Research output: Contribution to journal › Article › Research › peer-review
Published
MODELING THE IMPREGNATION PROCESS OF A SIPHON IMPREGNATION SYSTEM DURING FILAMENT WINDING
Miaris, A., Päßler, M., Schledjewski, R. & Mitschang, P., 2011, Proc. of the ASME 2011 Pressure Vessels and Piping Conference PVP 2011. p. 1-9
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Online consolidation process optimization by means of process simulation
Narnhofer, M., Schledjewski, R. & Mitschang, P., 2011, THEPLAC 2011. p. 1-12
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Processing and properties of glass/polypropylene in long fibre compounding extrusion
Schledjewski, R. & Priebe, M., 2011, In: Plastics, rubber and composites. 40, p. 374-379
Research output: Contribution to journal › Article › Research › peer-review
Published
Properties of compression moulded new fully biobased thermoset composites with aligned flax fibre textiles
Schledjewski, R., Pohl, T., Bierer, M., Natter, E., Madsen, B. & Hoydonckx, H., 2011, In: Plastics, rubber and composites. 40, p. 294-299
Research output: Contribution to journal › Article › Research › peer-review
Published
Research into the processing of composites
Schledjewski, R., 2011, In: Public service review: European science & technology : an independent reviewPublic Service Review. 2011, 11, p. 33-33
Research output: Contribution to journal › Article › Research › peer-review
Published
RING WINDING TECHNOLOGY – INCREASED PROCESS EFFICIENCY AND EFFECTS ON THE MECHANICAL PROPERTIES OF RING SPECIMENS
Päßler, M., Miaris, A., Schledjewski, R. & Mitschang, P., 2011, Proc. of the ASME 2011 Pressure Vessels and Piping Conference PVP 2011. p. 1-10
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Simulation des kontinuierlichen Schweißprozesses
Narnhofer, M., Schledjewski, R. & Mitschang, P., 2011, 20. Leobener Kunststoff-Kolloquium - Polymerer Leichtbau. p. 19-28
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Status und Potentiale der Automation in der Verarbeitung von Faser-Kunststoff-Verbunden
Fauster, E., Kastanis, D. & Schledjewski, R., 2011, 20. Leobener Kunststoff-Kolloquium - Polymerer Leichtbau. p. 59-66
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Published
Zweidimensionale Permeabilitätsmessung von flächigen Faserhalbzeugen unter Verwendung von optischen und kapazitiven Messverfahren
Größing, H., Wolfahrt, M. & Schledjewski, R., 2011, 20. Leobener Kunststoff-Kolloquium - Polymerer Leichtbau. p. 205-211
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
2010
Published
Integrated solutions for a fully-automated grinding of surface flaws on semi-finished steel products
Richter, G., Ofner, R. & Fauster, E., 2010, In: SEAISI quarterly. 39, 3, p. 31-40 10 p.
Research output: Contribution to journal › Article › Research › peer-review
2009
Published
Integrated solutions for a fully-automated grinding of surface flaws on semi-finished products
Richter, G., Ofner, R. & Fauster, E., 2009, AISTech 2009 - Proceedings of the Iron and Steel Technology Conference. p. 1133-1149 17 p. (AISTech - Iron and Steel Technology Conference Proceedings; vol. 1).
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Research Portal

Chair of Processing of Composites and Design for Recycling (270)

Research output