Christian Mitterer

101 - 200 out of 598Page size: 100

Research output

  1. 2019
  2. Published

    Nanostructured Fe-Ni Sulfide : A Multifunctional Material for Energy Generation and Storage

    Zhao, C., Zhang, C., Bhoyate, S., Kahol, P. K., Kostoglou, N., Mitterer, C., Hinder, S. J., Baker, M., Constantinides, G., Polychronopoulou, K., Rebholz, C. & Gupta, R. K., 11 Jul 2019, In: Catalysts : open access journal. 9.2019, 7, 12 p., 597.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Exceptional fracture resistance of ultrathin metallic glass films due to an intrinsic size effect

    Glushko, O., Mühlbacher, M., Gammer, C., Cordill, M. J., Mitterer, C. & Eckert, J., 4 Jun 2019, In: Scientific reports. 9, 1, p. 1-9 9 p., 8281.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Structure-stress relationships in nanocrystalline multilayered Al0.7Cr0.3N/Al0.9Cr0.1N coatings studied by cross-sectional X-ray nanodiffraction

    Klima, S., Jäger, N., Hruby, H., Mitterer, C., Keckes, J., Burghammer, M. & Daniel, R., 15 May 2019, In: Materials and Design. 170, p. 1-9 107702.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Arc-produced short-length multi-walled carbon nanotubes as “millstones” for the preparation of graphene-like nanoplatelets

    Kostoglou, N., Ryzhkov, V., Walters, I., Doumanidis, C. C., Rebholz, C. & Mitterer, C., May 2019, In: Carbon. 146.2019, May, p. 779-784 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Thermal stability of immiscible sputter-deposited Cu-Mo thin films

    Souli, I., Gruber, G., Terziyska, V., Zechner, J. & Mitterer, C., 30 Apr 2019, In: Journal of alloys and compounds. 793.2019, April, p. 208-218 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Plasma-Derived Graphene-Based Materials for Water Purification and Energy Storage

    Natter, N., Kostoglou, N., Koczwara, C., Tampaxis, C., Steriotis, T., Gupta, R. K., Paris, O., Rebholz, C. & Mitterer, C., 3 Apr 2019, In: C – journal of carbon research. 5.2019, 2, 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Compressive and tensile bending of sputter deposited Al/Mo bilayers

    Kreiml, P., Rausch, M., Terziyska, V., Winkler, J., Mitterer, C. & Cordill, M., 15 Mar 2019, In: Scripta materialia. 162.2019, March, p. 367-371 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Effects of reference materials on texture coefficients determined for a CVD α-Al2O3 coating

    Stylianou, R. P., Tkadletz, M., Schalk, N., Penoy, M., Czettl, C. & Mitterer, C., 15 Feb 2019, In: Surface & coatings technology. 359.2019, February, p. 314-322 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Crack deflecting microstructure for improved electro-mechanical lifetimes of flexible systems

    Cordill, M. J., Jörg, T., Glushko, O., Franz, R. & Mitterer, C., 13 Feb 2019, In: Materials letters. 244.2019, 1 June, p. 47-49 3 p.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Electrodeposited Nanostructured CoFe2O4 for OverallWater Splitting and Supercapacitor Applications

    Zhang, C., Bhoyate, S., Zhao, C., Kahol, P. K., Kostoglou, N., Mitterer, C., Hinder, S. J., Baker, M., Constantinides, G., Polychronopoulou, K., Rebholz, C. & Gupta, R. K., 13 Feb 2019, In: Catalysts : open access journal. 9.2019, 2, p. 1-11 11 p., 176.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Oxidation and wet-etching behavior of MoAlTi thin films deposited by sputtering from a rotatable MoAlTi compound target

    Lorenz, R., O`Sullivan, M., Sprenger, D., Lang, B., Köstenbauer, H., Winkler, J. & Mitterer, C., 5 Feb 2019, In: Journal of vacuum science & technology / B (JVST). 37.2019, 2, 021202.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Thermal crack network on CVD TiCN/α-Al2O3 coated cemented carbide cutting tools

    Gassner, M., Schalk, N., Tkadletz, M., Czettl, C. & Mitterer, C., 5 Feb 2019, In: International journal of refractory metals & hard materials. 81.2019, June, p. 1-6 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Antibacterial Silicon Oxide Thin Films Doped with Zinc and Copper Grown by Atmospheric Pressure Plasma Chemical Vapor Deposition

    Jäger, E., Schmidt, J., Pfuch, A., Spange, S., Beier, O., Jäger, N., Jantschner, O., Daniel, R. & Mitterer, C., Feb 2019, In: Nanomaterials. 9.2019, 2, p. 1-14 14 p., 255.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Anisotropy of fracture toughness in nanostructured ceramics controlled by grain boundary design

    Daniel, R., Meindlhumer, M., Baumegger, W., Todt, J., Zalesak, J., Ziegelwanger, T., Mitterer, C. & Keckes, J., 2019, In: Materials and Design. 161.2019, January, p. 80-85 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Evolution of structure and residual stress of a fcc/hex-AlCrN multi-layered system upon thermal loading revealed by cross-sectional X-ray nano-diffraction

    Jäger, N., Klima, S., Hruby, H., Julin, J., Burghammer, M., Keckes, J., Mitterer, C. & Daniel, R., 2019, In: Acta materialia. 162.2019, 1, p. 55-66 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Nanoporous activated carbon cloth for H2 storage, selective CO2/CH4 separation and supercapacitor energy storage

    Kostoglou, N., Koczwara, C., Prehal, C., Babic, B., Tampaxis, C., Charalambopoulou, G., Steriotis, T., Polychronopouloe, K., Constantinides, G., Paris, O., Rebholz, C. & Mitterer, C., 2019.

    Research output: Contribution to conference › Poster › Research

  18. Published

    Thermal stability of nanolamellar fcc-Ti1-xAlxN grown by chemical vapor deposition

    Tkadletz, M., Hofer, C., Wüstefeld, C., Schalk, N., Motylenko, M., Rafaja, D., Holzschuh, H., Bürgin, W., Sartory, B., Mitterer, C. & Czettl, C., 2019, In: Acta Materialia. 174.2019, August, p. 195-205 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    The sputter performance of an industrial-scale planar Mo-target over ist lifetime: Target erosion and film properties

    Rausch, M., Sabag, A., Pichler, K.-H., Gruber, G., Köstenbauer, J., Köstenbauer, H., Kreiml, P., Cordill, M. J., Winkler, J. & Mitterer, C., 2019, In: Surface & coatings technology. 381.2020, 15 January, 14 p., 125174.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Tribological testing of leather surface coated with sputter-deposited Ti-Ag-O films

    Hofer-Roblyek, A., Rebelo de Figueiredo, M., Carvalho, I., Carvalho, S., Gaidau, C., Mitterer, C. & Franz, R., 2019, In: Tribology International. 137.2019, September, p. 59-65 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  21. 2018
  22. E-pub ahead of print

    Evolution of microstructure and mechanical properties of a grades TiAlON thin film investigated by cross-sectional characterization techniques

    Schalk, N., Tkadletz, M., Terziyska, V., Deluca, M., Letofsky-Papst, I., Keckes, J. & Mitterer, C., 14 Dec 2018, (E-pub ahead of print) In: Surface & coatings technology. 315.2019, February, p. 155-161 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  23. E-pub ahead of print

    Theory-guided metal-decoration of nanoporous carbon for hydrogen storage applications

    Holec, D., Kostoglou, N., Tampaxis, C., Babic, B., Mitterer, C. & Rebholz, C., 26 Jul 2018, (E-pub ahead of print) In: Surface & coatings technology. 351.2018, 15 October, p. 42-49 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    30 nm X-ray focusing correlates oscillatory stress, texture and structural defect gradients across multilayered Ti N-SiOx thin film

    Keckes, J., Daniel, R., Todt, J., Zalesak, J., Sartory, B., Braun, S., Gluch, J., Rosenthal, M., Burghammer, M. C., Mitterer, C., Niese, S. & Kubec, A., 2018, In: Acta materialia. 144, p. 862-873

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    A comparative study on NbOx films reactively sputtered from sinterd and cold gas sprayed targets

    Lorenz, R., O`Sullivan, M., Fian, A., Sprenger, D., Lang, B. & Mitterer, C., 2018, In: Applied surface science. p. 1157-1162

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Arc evaporated Ti-Al-N/Cr-Al-N multilayer coating systems for cutting applications

    Teppernegg, T., Czettl, C., Michotte, C. & Mitterer, C., 2018, In: International journal of refractory metals & hard materials. 72, p. 83-88

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Cross-sectional characterization techniques as the basis for knowledge-based design of graded CVD TiN-TiB2 coatings

    Tkadletz, M., Schalk, N., Mitterer, C., Keckes, J., Pohler, M. & Czettl, C., 2018, In: International journal of refractory metals & hard materials. 71, p. 280-284

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Effects of bias pulse frequencies on reactively sputter deposited NbOx films

    Lorenz, R., O`Sullivan, M., Fian, A., Sprenger, D., Lang, B. & Mitterer, C., 2018, In: Thin solid films. p. 335-342

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Electro-mechanical behavior of Al/Mo bilayers studied with in situ straining methods

    Kreiml, P., Rausch, M., Terziyska, V., Köstenbauer, H., Winkler, J., Mitterer, C. & Cordill, M., 2018, In: Thin solid films. p. 131-136

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Enhanced Ti0.84Ta0.16N diffusion barriers, grown by a hybrid sputtering technique with no substrate heating, between Si (001) wafers and Cu overlayers

    Mühlbacher, M., Greczynski, G., Sartory, B., Schalk, N., Lu, J., Petrov, I., Greene, J. E., Hultman, L. & Mitterer, C., 2018, In: Scientific reports (London : Nature Publishing Group). p. 1-9

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Gewebe aus nanoporöser Aktivkohle

    Mitterer, C., Paris, O., Kostoglou, N. & Koczwara, C., 2018, In: Der Energietechniker. 2, p. 34-36

    Research output: Contribution to journal › Article › Research

  32. Published

    High-temperature tribology and oxidation of Ti1-x-γAlxTaγN hard coatings

    Großmann, B., Tkadletz, M., Schalk, N., Czettl, C., Pohler, M. & Mitterer, C., 2018, In: Surface & coatings technology. p. 190-197

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Influence of cutting speed and workpiece material on the wear mechanisms of CVD TiCN/α-Al2O3 coated cutting inserts during turning

    Gassner, M., Schalk, N., Tkadletz, M., Pohler, M., Czettl, C. & Mitterer, C., 2018, In: Wear. 398-399.2018, March, p. 90-98

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Influence of discharge power and bias potential on microstructure and hardness of sputtered amorphous carbon coatings

    Saringer, C., Oberroither, C., Zorn, K., Franz, R. & Mitterer, C., 2018, In: Journal of vacuum science & technology / A (JVST). 36, 2

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Linking erosion and sputter performance of a rotatable Mo target to microstructure and properties of the deposited films

    Hofer-Roblyek, A. M., Pichler, K.-H., Linke, C., Franz, R., Winkler, J. & Mitterer, C., 2018.

    Research output: Contribution to conference › Poster › Research

  36. Published

    Linking erosion and sputter performance of a rotatable Mo target to microstructure and properties of the deposited thin films

    Hofer-Roblyek, A. M., Pichler, K.-H., Linke, C., Franz, R., Winkler, J. & Mitterer, C., 2018, In: Surface & coatings technology. p. 354-359

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Microstructure and mechanical properties of CVD TiN/TiBN multilayer coatings

    Kainz, C., Schalk, N., Tkadletz, M., Saringer, C., Mitterer, C. & Czettl, C., 2018.

    Research output: Contribution to conference › Poster › Research

  38. Published

    Microstructure and physical properties of sputter-deposited Cu-Mo thin films

    Souli, I., Terziyska, V., Zechner, J. & Mitterer, C., 2018, In: Thin solid films. p. 301-308

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Microstructure, mechanical properties and cutting performance of Cr1-yTayN single layer and Ti1-xAlxN/Cr1-yTayN multilayer coatings

    Schalk, N., Pohler, M., Hirn, S., Terziyska, V., Polcik, P., Kolozsvári, S., Mitterer, C. & Czettl, C., 2018, In: International journal of refractory metals & hard materials. p. 211-216

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Nanoporous activated carbon cloth for H2 storage, selective CO2/CH4 separation and supercapacitor energy storage

    Kostoglou, N., Koczwara, C., Prehal, C., Babic, B., Tampaxis, C., Charalambopoulou, G., Steriotis, T., Polychronopoulou, K., Constantinides, G., Paris, O., Rebholz, C. & Mitterer, C., 2018.

    Research output: Contribution to conference › Poster › Research

  41. Published

    Nanoporous activated carbon cloth for H2 storage and selective CO2/CH4 separation

    Kostoglou, N., Koczwara, C., Babic, B., Polychronopoulou, K., Constantinides, G., Paris, O., Rebholz, C. & Mitterer, C., 2018.

    Research output: Contribution to conference › Poster › Research

  42. Published

    Needle grass array of nanostructured nickel cobalt sulfide electrode for clean energy generation

    Zequine, C., Bhoyate, S., Siam, K., Kahol, P. K., Kostoglou, N., Mitterer, C., Hinder, S., Baker, M., Constantinides, G., Rebholz, C., Gupta, G., Li, X. & Gupta, R. K., 2018, In: Surface & coatings technology. p. 306-312

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    New insights into the oxidation behaviour of AlCrSiN coatings and an new approach to avoid trans-interface diffusion at elevated temperatures

    Jäger, N., Klima, S., Meindlhumer, M., Hruby, H., Mitterer, C., Keckes, J. & Daniel, R., 2018.

    Research output: Contribution to conference › Poster › Research

  44. Published

    Novel combustion synthesis of carbon foam‑aluminum fluoride nanocomposite materials

    Kostoglou, N., Gunduz, I. E., Isik, T., Ortalan, V., Constantinides, G., Kontos, A. G., Steriotis, T., Ryzhkov, V., Bousser, E., Matthews, A., Doumanidis, C. C., Mitterer, C. & Rebholz, C., 2018, In: Materials and Design. 144, p. 222-228

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Oxidation and wet etching behavior of sputtered Mo-Ti-Al films

    Jörg, T., Hofer-Roblyek, A. M., Köstenbauer, H., Winkler, J. & Mitterer, C., 2018, In: Journal of vacuum science & technology / A (JVST). 36, p. 021513-1-021513-5

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Sputter deposition of Mo-based multicomponent thin films from rotatable targets : Experiment and simulation

    Rausch, M., Pavlovic, M., Kreiml, P., Cordill, M., Winkler, J. & Mitterer, C., 2018, In: Applied surface science. 455, p. 1029-1036

    Research output: Contribution to journal › Article › Research › peer-review

  47. 2017
  48. Published

    Complementary High Spatial Resolution Methods in Materials Science and Engineering

    Paris, O., Lang, D., LI, J., Schumacher, P., Deluca, M., Daniel, R., Tkadletz, M., Schalk, N., Mitterer, C., Todt, J., Keckes, J., Zhang, Z., Popovski, G., Ganser, C., Teichert, C. & Clemens, H., 31 Dec 2017, In: Advanced engineering materials. 19.2017, 4, 22 p., 1600671.

    Research output: Contribution to journal › Article › Research › peer-review

  49. E-pub ahead of print

    A correlative experimental and ab initio approach to improve the fracture behavior of Mo thin films by alloying with Cu

    Jörg, T., Music, D., Cordill, M., Franz, R., Köstenbauer, H., Linke, C., Winkler, J., Schneider, J. M. & Mitterer, C., 25 Sept 2017, (E-pub ahead of print) In: Applied physics letters. 111.2017, 13, p. 134101-1-134101-4

    Research output: Contribution to journal › Article › Research › peer-review

  50. E-pub ahead of print

    Non-reactive dc magnetron sputter deposition of Mo-O thin films from ceramic MoOx targets

    Pachlhofer, J., Martin-Luengo, A. T., Franz, R., Franzke, E., Köstenbauer, H., Winkler, J., Bonanni, A., Mitterer, S. & Mitterer, C., 18 Sept 2017, (E-pub ahead of print) In: Surface & coatings technology. 332.2017, 25 December, p. 80-85 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Tailoring age hardening of Ti1-xAlxN by Ta alloying

    Großmann, B., Jamnig, A., Schalk, N., Czettl, C., Pohler, M. & Mitterer, C., 13 Sept 2017, In: Journal of vacuum science & technology / A (JVST). 35.2017, 6, 6 p., 060604.

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Electro-mechanical behavior of sputter-deposited molybdenum-aluminum multilayers

    Kreiml, P., Rausch, M. (Co-editor), Franz, R. (Co-editor), Winkler, J. (Co-editor), Mitterer, C. (Co-editor) & Cordill, M. J., 11 Sept 2017.

    Research output: Contribution to conference › Poster › Research › peer-review

  53. E-pub ahead of print

    Influence of Ar ion etching on the surface topography of cemented carbide cutting inserts

    Gassner, M., Schalk, N., Sartory, B., Pohler, M., Czettl, C. & Mitterer, C., 24 Aug 2017, (E-pub ahead of print) In: International journal of refractory metals & hard materials. 69.2017, December, p. 234-239 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    Deformation behavior of Re alloyed Mo thin films on flexible substrates: In situ fragmentation analysis supported by first-principles calculations

    Jörg, T., Music, D., Hauser, F., Cordill, M., Franz, R., Köstenbauer, H., Winkler, J., Schneider, J. M. & Mitterer, C., 7 Aug 2017, In: Scientific reports (London : Nature Publishing Group). 2017, 7, 10 p., 7374.

    Research output: Contribution to journal › Article › Research › peer-review

  55. Published

    Chemical composition and properties of MoAl thin films deposited by sputtering from MoAl compound targets

    Lorenz, R., O'Sullivan, M., Sprenger, D., Lang, B. & Mitterer, C., 18 May 2017, In: Journal of vacuum science & technology / A (JVST). 35.2017, 6 p., 041504.

    Research output: Contribution to journal › Article › Research › peer-review

  56. E-pub ahead of print

    Solvothermal synthesis, nanostructural characterization and gas cryo-adsorption studies in a metal-organic framework (IRMOF-1) material

    Tzitzios, V., Kostoglou, N., Giannouri, M., Basina, G., Tampaxis, C., Charakambopoulou, G., Steriotis, T., Polychronopouloe, K., Doumanidis, C. C., Mitterer, C. & Rebholz, C., 4 May 2017, (E-pub ahead of print) In: International Journal of Hydrogen Energy . 42.2017, 37, p. 23899-23907 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  57. E-pub ahead of print

    Cold pilgering of duplex steel tubes: The response of austenite and ferrite to excessive cold deformation up to high strains

    Ragger, K., Primig, S., Daniel, R., Kaiser, R., Paal, J., Mitterer, C. & Buchmayr, B., 16 Mar 2017, (E-pub ahead of print) In: Materials characterization. 128.2017, June, p. 257–268 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  58. Published

    Deformation Mechanisms in Magnetron Sputtered Thin Film Metallic Glasses

    Mühlbacher, M., Gammer, C., Konetschnik, R., Schöberl, T., Mitterer, C. & Eckert, J., Mar 2017.

    Research output: Contribution to conference › Poster › Research

  59. Published

    Effect of growth conditions on interface stability and thermophysical properties of sputtered Cu films on Si with and without WTi barrier layers

    Souli, I., Terziyska, V., Keckes, J., Robl, W., Zechner, J. & Mitterer, C., 9 Feb 2017, In: Journal of vacuum science & technology / B (JVST). 35.2017, 2, 11 p., 022201.

    Research output: Contribution to journal › Article › Research › peer-review

  60. Published

    Industrial-scale sputter deposition of molybdenum oxide thin films: Microstructure evolution and properties

    Pachlhofer, J., Martin-Luengo, A. T., Franz, R., Franzke, E., Köstenbauer, H., Winkler, J., Bonanni, A. & Mitterer, C., 4 Jan 2017, In: Journal of vacuum science & technology / A (JVST). 35.2017, 2, 8 p., 021504.

    Research output: Contribution to journal › Article › Research › peer-review

  61. Published

    Arc evaporated Ti-Al-N/Cr-Al-N multilayer coating systems for cutting applications

    Teppernegg, T., Czettl, C., Michotte, C. & Mitterer, C., 2017, 19th Plansee Seminar. p. 94/1-94/12

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  62. Published

    Chemical composition and properties of MoAl thin films deposited by sputtering from MoAl compound targets

    Lorenz, R., O'Sullivan, M., Sprenger, D., Lang, B. & Mitterer, C., 2017.

    Research output: Contribution to conference › Poster › Research

  63. Published

    Chemical composition and properties of MoAl thin films deposited sputtering from MoAl compound targets

    Lorenz, R., O`Sullivan, M., Sprenger, D., Lang, B. & Mitterer, C., 2017, 19th Plansee Seminar. p. 91/1-91/11

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  64. Published

    Cross-sectional characterization techniques as the basis for knowledge-based design of graded CVD TiN-TiB2 coatings

    Tkadletz, M., Schalk, N., Mitterer, C., Hofer, C., Keckes, J., Deluca, M., Pohler, M. & Czettl, C., 2017.

    Research output: Contribution to conference › Poster › Research

  65. Published

    Cross-sectional characterization techniques as the basis for knowledge-based design of graded CVD TiN-TiB2 coatings

    Tkadletz, M., Schalk, N., Mitterer, C., Keckes, J., Pohler, M. & Czettl, C., 2017, 19th Plansee Seminar. p. 88/1-88/9

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  66. Published

    Hydrogen storage and selective gas separation performance of a nanoporous carbon cloth-like material

    Kostoglou, N., Babic, B., Matovic, B., Constantinides, G., Charalambopoulou, G., Steriotis, T., Baker, M., Polychronopoulou, K., Mitterer, C. & Rebholz, C., 2017.

    Research output: Contribution to conference › Poster › Research

  67. Published

    Influence of cutting speed and workpiece material on the wear mechanisms of CVD TiCN/α-Al2O3 coated cutting inserts during turning

    Gassner, M., Schalk, N., Tkadletz, M., Pohler, M., Czettl, C. & Mitterer, C., 2017.

    Research output: Contribution to conference › Poster › Research

  68. Published

    Influence of cutting speed and workpiece material on the wear mechanisms of CVD TiCN/α-Al2O3 coated cutting inserts during turning

    Gassner, M., Schalk, N., Tkadletz, M., Pohler, M., Czettl, C. & Mitterer, C., 2017, 19th Plansee Seminar. p. 92/1-92/11

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  69. Published

    Influence of the Ta content on microstructure, properties and thermal stability of arc evaporated Ti Al Ta N hard coatings

    Großmann, B., Tkadletz, M., Schalk, N., Czettl, C., Pohler, M., Jamnig, A. & Mitterer, C., 2017.

    Research output: Contribution to conference › Poster › Research

  70. Published

    Influence of the Ta content on microstructure, properties and thermal stabiltiy of arc evaporated Ti1-x-yAlxTayN hard coatings

    Großmann, B., Tkadletz, M., Schalk, N., Czettl, C., Pohler, M., Jamnig, A. & Mitterer, C., 2017, 19th Plansee Seminar. p. 96/1-96/12

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  71. Published

    Micromechanical testing of CVD diamond coated WC-Co hard metals

    Thomma, P., Tritremmel, C., Klünsner, T., Czettl, C. & Mitterer, C., 2017, 19th Plansee Seminar. p. 70/1-70/7

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  72. Published

    Microstructure, mechanical properties and application behavior of Cr1-xTaxN hard coatings

    Pohler, M., Schalk, N., Hirn, S., Terziyska, V., Polcik, P., Kolozsvári, S., Mitterer, C. & Czettl, C., 2017, 19th Plansee Seminar. p. 53/1-53/9

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  73. Published

    Nanoporous activated carbon cloth as a versatile material for hydrogen adsorption, selective gas separation and electrochemical energy storage

    Kostoglou, N., Koczwara, C., Prehal, C., Terziyska, V., Babic, B., Matovic, B., Constantinides, G., Tampaxis, C., Charakambopoulou, G., Steriotis, T., Hinder, S., Baker, M., Polychronopoulou, K., Doumanidis, C. C., Paris, O., Mitterer, C. & Rebholz, C., 2017, In: Nano Energy. 40.2017, October, p. 49-64 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  74. Published

    New insights into the oxidation behaviour of AlCrSiN coatings and a new approach to avoid trans-interface diffusion at elevated temperatures

    Jäger, N., Klima, S., Hruby, H., Mitterer, C., Keckes, J. & Daniel, R., 2017.

    Research output: Contribution to conference › Poster › Research

  75. Published

    Phase composition and thermal stability of arc evaporated Ti1 − xAlxN hard coatings with 0.4 ≤ x ≤ 0.67

    Großmann, B., Schalk, N., Czettl, C., Pohler, M. & Mitterer, C., 2017, In: Surface & coatings technology. 309.2017, 15 January, p. 687-693 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  76. Published

    Spatial distribution of plasma properties in a dc-magnetron discharge and influence of the discharge power

    Saringer, C., Pajdarova, A. D., Baroch, P., Zorn, K., Franz, R. & Mitterer, C., 2017.

    Research output: Contribution to conference › Poster › Research › peer-review

  77. Published

    Straightforward measurement of thermal conductivity of hard coatings with the TDTR method

    Winkler, M., Tkadletz, M., Schalk, N., Mitterer, C., Bartholomé, K., Pohler, M. & Czettl, C., 2017.

    Research output: Contribution to conference › Poster › Research

  78. 2016
  79. Published

    Hierarchical Architectures to Enhance Structural and Functional Properties of Brittle Materials

    Bermejo, R., Daniel, R., Schuecker, C., Paris, O., Danzer, R. & Mitterer, C., 26 Dec 2016, In: Advanced engineering materials. 19, 4, 15 p., 1600683.

    Research output: Contribution to journal › Article › Research › peer-review

  80. E-pub ahead of print

    Grain boundary design of thin films: Using tilted brittle interfaces for multiple crack deflection toughening

    Daniel, R., Meindlhumer, M., Baumegger, W., Zalesak, J., Sartory, B., Burghammer, M. C., Mitterer, C. & Keckes, J., 2 Oct 2016, (E-pub ahead of print) In: Acta materialia. 122.2017, 1 January, p. 130-137 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  81. Published

    Comparison of reactive magnetron sputter deposition of TiNx and TiOx as a function of the discharge power

    Saringer, C., Franz, R., Zorn, K. & Mitterer, C., 14 Sept 2016.

    Research output: Contribution to conference › Poster › Research

  82. Published

    Advances in coating and thin film characterization

    Mitterer, C., 13 Sept 2016.

    Research output: Contribution to conference › Presentation › Research

  83. Published

    Nanoporous graphene derived by plasma processing: Properties towards hydrogen adsorption and selective carbon dioxide/methan gas separation

    Kostoglou, N., Tian, M., Holyfield, L., Ting, V., Mays, T., Tampaxis, C., Steriotis, T., Polychronopoulou, K., Walters, I., Mitterer, C. & Rebholz, C., 13 Sept 2016.

    Research output: Contribution to conference › Poster › Research

  84. Published

    Effect of discharge power on target poisoning and coating properties in reactive magnetron sputter deposition of TiN

    Saringer, C., Franz, R., Zorn, K. & Mitterer, C., 1 Jul 2016, In: Journal of vacuum science & technology / A (JVST). 34.2016, 4, 8 p., 041517.

    Research output: Contribution to journal › Article › Research › peer-review

  85. E-pub ahead of print

    Fracture toughness enhancement of brittle nanostructured materials by spatial heterogeneity: A micromechanical proof for CrN/Cr and TiN/SiOx multilayers

    Daniel, R., Meindlhumer, M., Zalesak, J., Sartory, B., Zeilinger, A., Mitterer, C. & Keckes, J., 13 May 2016, (E-pub ahead of print) In: Materials & design. 104.2016, 15 August, p. 227-234 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  86. Published

    Influence of varying nitrogen partial pressures on microstructure, mechanical and optical properties of sputtered TiAlON coatings

    Schalk, N., Simonet Fotso, J., Holec, D., Fian, A., Jakopic, G., Terziyska, V., Daniel, R. & Mitterer, C., 27 Apr 2016.

    Research output: Contribution to conference › Presentation › Research

  87. Published

    In-situ Observation of Cross- Sectional Microstructural Changes and Stress Distributions in Fracturing TiN Thin Film during Nanoindentation

    Zeilinger, A., Todt, J., Krywka, C., Müller, M., Ecker, W., Sartory, B., Meindlhumer, M., Stefenelli, M., Daniel, R., Mitterer, C. & Keckes, J., 7 Mar 2016, In: Scientific reports (London : Nature Publishing Group). 6:22670, p. 1-14 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  88. Published

    TiN diffusion barrier failure by the formation of Cu3Si investigated by electron microscopy and atom probe tomography

    Mühlbacher, M., Greczynski, G., Sartory, B., Mendez Martin, F., Schalk, N., Lu, J., Hultman, L. & Mitterer, C., 19 Feb 2016, In: Journal of Vacuum Science and Technology B, JVSTB. 34.2016, 2, p. 1-8 8 p., 022202.

    Research output: Contribution to journal › Article › Research › peer-review

  89. Published

    Advanced characterization methods for wear resistant hard coatings: A review on recent progress

    Tkadletz, M., Schalk, N., Daniel, R., Keckes, J., Czettl, C. & Mitterer, C., 2016, In: Surface & coatings technology. 285, p. 31-46 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  90. Published

    Advanced hard coatings for cutting tools

    Mitterer, C. & Czettl, C., 2016.

    Research output: Contribution to conference › Presentation › Research

  91. Published

    Al-rich cubic Al0.8Ti0.2N coating with self-organized nano-lamellar microstructure: Thermal and mechanical properties

    Todt, J., Zalesak, J., Daniel, R., Pitonak, R., Köpf, A., Weißenbacher, R., Sartory, B., Mitterer, C. & Keckes, J., 2016, In: Surface & coatings technology. 291, p. 89-93 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  92. Published

    Combinatorial synthesis of Cr1−xAlxN and Ta1−xAlxN coatings using industrial scale co-sputtering

    Schalk, N., Weirather, T., Sabitzer, C., Hirn, S., Terziyska, V., Gangopadhyay, S., Czettl, C., Polcik, P., Kathrein, M. & Mitterer, C., 2016, In: Surface engineering. 32, 4, p. 252-257 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  93. Published

    Cross-sectional structure-property relationship in a graded nanocrystalline Ti1-xAlxN thin film

    Zalesak, J., Bartosik, M., Daniel, R., Mitterer, C., Krywka, C., Kiener, D., Mayrhofer, P. H. & Keckes, J., 2016, In: Acta materialia. 102, p. 212-219 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  94. Published

    Design of multilayer metallization to reduce mechanical loading: Effect of growth conditions on interface stability and thermo-mechanical properties of sputtered Cu films on Si with and without WTi barrier layers

    Souli, I., Terziyska, V., Keckes, J., Zechner, J. & Mitterer, C., 2016.

    Research output: Contribution to conference › Presentation › Research

  95. Published

    Diffusion Studies in the TiN/Cu Bilayer System and Beyond

    Mühlbacher, M., Mendez Martin, F., Sartory, B., Greczynski, G., Lu, J., Schalk, N., Hultman, L. & Mitterer, C., 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  96. Published

    Electro-Mechanical Behaviorof Single and Multilayer Metal Thin Films on Polymer Substrates

    Jörg, T., Cordill, M., Franz, R., Kirchlechner, C., Winkler, J. & Mitterer, C., 2016.

    Research output: Contribution to conference › Presentation › Research

  97. Published

    Electro-Mechanical Response of Sputter-Deposited Mo Thin Films for Back Contacts in CIGS Flexible Solar Cells

    Jörg, T., Cordill, M. J., Franz, R. & Mitterer, C., 2016.

    Research output: Contribution to conference › Poster › Research

  98. Published

    Energy consumption and material fluxes in hard coating deposition processes

    Gassner, M., Rebelo De Figueiredo, M., Schalk, N., Franz, R., Weiß, C., Rudigier, H., Holzschuh, H., Bürgin, W., Pohler, M., Czettl, C. & Mitterer, C., 2016, In: Surface & coatings technology. 299, p. 49-55 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  99. Published

    Evolution of structure, stresses and mechanical properties of a fcc/hex-AlCrN multilayer system upon thermal loading revealed by cross-sectional X-ray nanodiffraction and micromechanical testing

    Jäger, N., Klima, S., Hruby, H., Mitterer, C., Keckes, J. & Daniel, R., 2016.

    Research output: Contribution to conference › Poster › Research

  100. Published

    Few-layer graphene-like flakes derived by plasma treatment: A potential material for hydrogen adsorption and storage

    Kostoglou, N., Tarat, A., Walters, I., Ryzhkov, V., Tampaxis, C., Charalambopoulou, G., Steriotis, T., Mitterer, C. & Rebholz, C., 2016, In: Microporous and Mesoporous Materials. 225, p. 482-487 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  101. Published

    Few-step synthesis, thermal purification and structural characterization of porous boron nitride nanoplatelets

    Kostoglou, N., Lukovic, J., Babic, B., Matovic, B., Photiou, D., Constantinides, G., Polychronopoulou, K., Ryzhkov, V., Großmann, B., Mitterer, C. & Rebholz, C., 2016, In: Materials & design. 110, p. 540-548 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  102. Published

    Finite element study of the influence of hard coatings on hard metal tool loading during milling

    Krajinovic, I., Daves, W., Tkadletz, M., Teppernegg, T., Klünsner, T., Schalk, N., Mitterer, C., Tritremmel, C., Ecker, W. & Czettl, C., 2016, In: Surface & coatings technology. 304, p. 134-141 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  103. Published

    Hydrogen adsorption properties of a nanoporous carbon cloth-like material derived by carbonization & activation of a cellulose-based polymer

    Kostoglou, N., Babic, B., Matovic, B., Tampaxis, C., Charalambopoulou, G., Steriotis, T., Hinder, S., Baker, M. A., Constantinides, G., Mitterer, C. & Rebholz, C., 2016.

    Research output: Contribution to conference › Presentation › Research

  104. Published

    Improvement of oxidation and corrosion resistance of Mo thin films by alloying with Ta

    Hofer-Roblyek, A. M., Mori, G., Fian, A., Winkler, J. & Mitterer, C., 2016, In: Thin solid films. 599, p. 1-6 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 4 5 6 Next
View graph of relations

Contact

Phone: 4220

Latest Research Output

View more (598)