Chair of Automation and Measurement (530)

Organisational unit: Chair

1 - 100 out of 615Page size: 100

Research output

  1. 2025
  2. Published

    Sensor element and contact force sensor device

    Kammerhofer, T. (Inventor) & Thurner, T. (Inventor), 16 Jan 2025, IPC No. G01L5/16, G01L5/22, G01L19/00, B25J13/08, Patent No. 18763502

    Research output: Patent

  3. 2024
  4. Published

    Automated surface crack detection with inductive thermography

    Oswald-Tranta, B., 1 Nov 2024, In: E-Journal of nondestructive testing. 29.2024, 11, 4 p., 30301.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Nondestructive Testing Handbook: Vol. 4, Thermal and Infrared Testing (IR), 4th ed.

    Oswald-Tranta, B., Nov 2024, NONDESTRUCTIVE TESTING HANDBOOK. USA, p. 443 - 455 part 8

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  6. Published

    Magnetic Railway Sleeper Detector

    Heindler, L., Hüttmayr, H., Thurner, T. & Zagar, B., 11 Oct 2024, In: Electronics. 13.2024, 20, 18 p., 4005.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Crack characterization in manganese steel using a µ-bolometer camera and an air-cooled inductor

    Tuschl, C., Oswald-Tranta, B., Dornig, P., Künstner, D., Pötz, M. & Eck, S., Jun 2024, Thermosense: Thermal Infrared Applications XLVI. Avdelidis, N. P. (ed.). SPIE, 8 p. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 13047).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    Impact Characteristics and Repair Approaches of Distinct Bio-Based Matrix Composites: A Comparative Analysis

    Ravindran, B., Agathocleous, T., Oswald-Tranta, B., Fauster, E. & Feuchter, M., 29 Mar 2024, In: Journal of composites science. 8.2024, 4, 20 p., 126.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Accoustic Tool Condition Monitoring with Angular Resolution on the Cutting Edges

    Ninevski, D., O'Leary, P., Pisowicz, T., Thaler, J. & Hagendorfer, E. J., 2024, 2024 IEEE International Instrumentation and Measurement Technology Conference (I2MTC) (I2MTC 2024).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. Published

    A novel approach to the realisation of a rail specimen with defined surface cracks in work-hardening manganese steel for the calibration of inductive thermographic measurements

    Tuschl, C., Oswald-Tranta, B., Künstner, D. & Eck, S., 2024, 17th Quantitative InfraRed Thermography Conference.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  11. Published

    Automatic detection based on Deep Learning of small cracks in induction thermography using images from FEM Simulation Models

    Antero, O., Muniategui, A., Gorostegui-Colinas, E., Oswald-Tranta, B. & Westphal, P., 2024, 17th Quantitative InfraRed Thermography Conference.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. Published

    Classification of Multivariate Time Series Data using Machine Learning and System Redundancy Analysis

    Lang, E., 2024

    Research output: Thesis › Master's Thesis

  13. Published

    Development of Active Thermography for NDT applications through Standardisation

    Ziegler, M., Maillard, S., Müller, D., Oswald-Tranta, B., Svantner, M., Bouteille, P., Huillery, R., Delemontez, J. & Cauiler, Y., 2024, 17th Quantitative Infrared Thermography Conference.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  14. Published

    Extended Rayleigh-Ritz Autoencoder with Distribution-Free Statistics

    Terbuch, A., Ninevski, D., O´Leary, P., Harker, M. & Mücke, M., 2024, 2024 IEEE International Instrumentation and Measurement Technology Conference (I2MTC) (I2MTC 2024). p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  15. Published

    Hybrid Machine Learning in Conjunction with Physical Systems

    Terbuch, A., 2024

    Research output: Thesis › Doctoral Thesis

  16. Published

    Inductive Thermography – a non-destructive inspection technique

    Oswald-Tranta, B., 2024, 17th Quantitative InfraRed Thermography Conference.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    Industrial Internet-of-Things Sensorsysteme für akustisches Condition-Monitoring in der Instandhaltung: Produktionsoptimierung durch vorausschauende Instandhaltung mittels akustischer Zustandsüberwachung

    Kammerhofer, T., Thurner, T. & Ninevski, D., 2024, 14 p.

    Research output: Book/Report › Anthology › Research

  18. Published

    Inspection of short surface cracks by inductive thermography and by computer tomography

    Oswald-Tranta, B., Hackl, A., Gorostegui-Colinas, E., Merino, A. M. & Westphal, P., 2024, Thermosense: Thermal Infrared Applications XLVI. Lopez, F., Avdelidis, N. P. & Ferrarini, G. (eds.). SPIE, 130470P. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 13047).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. Published

    Instrumentation and Signal Processing for the Verification of Directional Drilling

    O'Leary, P., Terbuch, A., Ninevski, D., Mevec, D., Fruhmann, R., Khalilimotlaghkasmaei, N. & Habacher, M., 2024, 2024 IEEE International Instrumentation and Measurement Technology Conference (I2MTC) (I2MTC 2024).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  20. Published

    Knowledge Constrained Optimization: Signal Separation and Optimal Control

    Handler, J., 2024

    Research output: Thesis › Doctoral Thesis

  21. Published

    Thermal Thermography with FEA Implementation at CFRP Motorsport Parts

    Tittler, M., 2024

    Research output: Thesis › Master's Thesis

  22. 2023
  23. Published

    Direct Numerical Solution of the LQR with Input Derivative Regularization Problem

    Handler, J., Harker, M. & Rath, G., 22 Nov 2023, In: IFAC-PapersOnLine. 56.2023, 2, p. 4846-4851 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Comparison of Inductive Thermography and Computer Tomography Results for Short Surface Cracks

    Oswald-Tranta, B., 14 Nov 2023, In: Engineering proceedings. 51.2023, 1, 5 p., 36.

    Research output: Contribution to journal › Article › Research › peer-review

  25. E-pub ahead of print

    Thermographic Estimation of the Area and Depth of Buried Heat Sources for Nondestructive Characterization of Horizontal Defects

    Mendioroz, A., Salazar, A., Lasserre, P., Oswald-Tranta, B. & Tuschl, C., 15 Oct 2023, (E-pub ahead of print) In: Journal of Nondestructive Evaluation. 42.2023, 4, 14 p., 91.

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Application of hybrid machine learning based quality control in daily site management

    Zöhrer, A., Winter, V., Terbuch, A., O'Leary, P. & Khalilimotlaghkasmaei, N., 9 Oct 2023, Proceedings of the ISRM 15th International Congress on Rock Mechanics and Rock Engineering & 72nd Geomechanics Colloquium : Challenges in Rock Mechanics and Rock Engineering. Salzburg, p. 569-574 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. Published

    Modelling Periodic Measurement Data Having a Piecewise Polynomial Trend Using the Method of Variable Projection

    Handler, J., Ninevski, D. & O'Leary, P., Oct 2023, IECON 2023- 49th Annual Conference of the IEEE Industrial Electronics Society. Institute of Electrical and Electronics Engineers

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  28. Published

    Scannende Detektion von Oberflächenfehlern in Weichenherzen mittels induktiver Thermografie

    Tuschl, C., Oswald-Tranta, B., Agathocleous, T., Eck, S. & Dornig, P., Oct 2023, DGZfP-Berichtsband BB 180. Vol. 180.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  29. Published

    Scanning pulse phase thermography for surface defect detection in manganese steel turnout frogs

    Tuschl, C., Oswald-Tranta, B., Eck, S. & Dornig, P., Aug 2023, In: Research and review journal of nondestructive testing. 1.2023, 1, 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Noniterative Model Predictive Control with Soft Input Constraints for Real-Time Trajectory Tracking

    Handler, J., Harker, M., Rath, G. & Rollett, M., 3 Jul 2023, 2023 American Control Conference (ACC).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  31. Published

    Optimal Control of State-Space Systems with Hard Bounds on Control Inputs and State Variables

    Harker, M., Rath, G. & Handler, J., 6 Jun 2023, 2023 12th Mediterranean Conference on Embedded Computing (MECO).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  32. Published

    Time-Domain Model Matching Under General Norms via Sparse Matrix Methods

    Handler, J., Harker, M. & Rath, G., 6 Jun 2023, 2023 12th Mediterranean Conference on Embedded Computing (MECO).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  33. E-pub ahead of print

    In-line and off-line NDT defect monitoring for thermoplastic automated tape layup

    Yadav, N., Oswald-Tranta, B., Gürocak, M., Galic, A., Adam, R. & Schledjewski, R., 31 Mar 2023, (E-pub ahead of print) In: NDT and E international. 137.2023, July, 8 p., 102839.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Scanning inductive pulse phase thermography with changing scanning speed for non-destructive testing

    Tuschl, C., Oswald-Tranta, B., Agathocleous, T. & Eck, S., 2 Feb 2023, In: Quantitative InfraRed Thermography Journal. 21.2024, 3, p. 156-171 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Detecting Anomalous Multivariate Time-Series via Hybrid Machine Learning

    Terbuch, A., O'Leary, P., Khalilimotlaghkasmaei, N., Auer, P., Zöhrer, A. & Winter, V., 12 Jan 2023, In: IEEE transactions on instrumentation and measurement. 72.2023, 13 p., 2503711.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    A Rayleigh-Ritz Autoencoder

    Terbuch, A., O'Leary, P., Ninevski, D., Hagendorfer, E. J., Schlager, E., Windisch, A. & Schweimer, C., 2023, 2023 IEEE International Instrumentation and Measurement Technology Conference (I2MTC) (I2MTC 2023). Kuala Lumpur, Malaysia: Institute of Electrical and Electronics Engineers, p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. Published

    Automatic Synthesis of Admissible Functions for Variational Learning

    O'Leary, P., Ninevski, D. & Terbuch, A., 2023, 2023 IEEE International Conference on Computational Intelligence and Virtual Environments for Measurement Systems and Applications (CIVEMSA 2023). Institute of Electrical and Electronics Engineers

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  38. Published

    Comparison of hit/miss and ‘â versus a’ POD calculations for short surface cracks using inductive thermography

    Oswald-Tranta, B., de Uralde Olavera, P. L., Gorostegui-Colinas, E. & Westphal, P., 2023

    Research output: Non-textual form › Web publication/site › Research

  39. Published

    Consideration of orthotropic thermal properties in the life time of short fibre reinforced polymers - Concept

    Afsharnia, R., 2023

    Research output: Thesis › Master's Thesis

  40. Published

    Convolutional neural network for automated surface crack detection in inductive thermography

    Oswald-Tranta, B., de Uralde Olavera, L. P., Gorostegui-Colinas, E. & Westphal, P., 2023, Thermosense: Thermal Infrared Applications XLV. Avdelidis, N. P. (ed.). SPIE, 125360L. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 12536).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  41. Published

    Estimation of the area and depth of buried heat sources: an approach to characterize defects in inductive and ultrasound excited thermography

    Mendioroz, A., Salazar, A., Oswald-Tranta, B. & Tuschl, C., 2023, Thermosense: Thermal Infrared Applications XLV. Avdelidis, N. P. (ed.). SPIE, 125360M. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 12536).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. Published

    Few-Shot Classification in Deep Learning based Anomaly Detection of Noisy Industrial Data

    Freyler, P., 2023

    Research output: Thesis › Master's Thesis

  43. Published

    Instrumented Milling Process and Analysis for Tool Wear Measurement

    Ninevski, D., Yifrach, Y. & O'Leary, P., 2023, 2023 IEEE International Instrumentation and Measurement Technology Conference (I2MTC) (I2MTC 2023). Kuala Lumpur, Malaysia: Institute of Electrical and Electronics Engineers

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  44. Published

    Mathematical Methods for the Implementation of Evidence Based Change Detection from Data

    Ninevski, D., 2023

    Research output: Thesis › Doctoral Thesis

  45. Published

    Networked Control Systems With Communication Delays

    Mattathil, G., 2023

    Research output: Thesis › Master's Thesis

  46. Published

    Numerical Methods for Optimal Control of Hydraulic Independent Metering Systems

    Stojanoski, G., 2023

    Research output: Thesis › Doctoral Thesis

  47. Published

    Scanning inductive thermography using a µ-bolometer and a visual camera

    Tuschl, C., Agathocleous, T., Oswald-Tranta, B. & Eck, S., 2023, Thermosense: Thermal Infrared Applications XLV. Avdelidis, N. P. (ed.). SPIE, 125360D. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 12536).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  48. Published

    Symbolic Data Representation of Multi-Variate Machine Measurement Data to Identify Quasi-Linguistic Patterns with Machine Learning

    Nuser, P., 2023

    Research output: Thesis › Master's Thesis

  49. Published

    The Rayleigh-Ritz Autoencoder with Distribution-Free Statistics

    Terbuch, A., Ninevski, D., O'Leary, P., Harker, M. & Mücke, M., 2023.

    Research output: Contribution to conference › Poster › Research › peer-review

  50. Published

    Towards Continuous Railway Monitoring: A Concept for Surface Crack Assessment Based on Surface Acoustic Waves

    Fichtenbauer, S., 2023

    Research output: Thesis › Master's Thesis

  51. 2022
  52. E-pub ahead of print

    Calculating probability of detection of short surface cracks using inductive thermography

    Oswald-Tranta, B., Hackl, A., Lopez de Uralde Olavera, P., Gorostegui-Colinas, E. & Rosell, A., 23 Dec 2022, (E-pub ahead of print) In: Quantitative InfraRed Thermography Journal. 21.2024, 2, p. 82-101 20 p.

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    Real-Time Identification of Periodic Signals using the Recursive Variable Projection Algorithm

    Handler, J., Ninevski, D., Rollett, M. & O'Leary, P., 9 Dec 2022, IECON 2022 – 48th Annual Conference of the IEEE Industrial Electronics Society. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  54. Published

    Quality monitoring in vibro ground improvement: A hybrid machine learning approach

    Terbuch, A., Zöhrer, A., Winter, V., O'Leary, P., Khalilimotlaghkasmaei, N. & Steiner, G., 4 Oct 2022, In: Geomechanics and tunnelling. 15.2022, 5, p. 658-664 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  55. Published

    Computational methods for the detection of wear and damage to milling tools br

    Ninevski, D., Thaler, J., O'Leary, P., Klünsner, T., Mücke, M., Hanna, L., Teppernegg, T., Treichler, M., Peissl, P. & Czettl, C., Oct 2022, In: Journal of manufacturing processes. 82.2022, October, p. 78-87 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  56. Published

    Consideration of orthotropic thermal properties of short fibre reinforced plastics

    Afsharnia, R., Stadler, G., Primetzhofer, A., Pinter, G. G. & Oswald-Tranta, B., 26 Jun 2022.

    Research output: Contribution to conference › Presentation › Research

  57. Published

    Coordinated trajectory tracking as an inverse problem with applications to collaborative robotics

    Harker, M., Handler, J. & Rath, G., 21 Jun 2022, 11th Mediterranean Conference on Embedded Computing. 11 ed. Budva, (11th Mediterranean Conference on Embedded Computing; vol. p.463-469, no. 11).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  58. Published

    Scanning Inductive Thermographic Surface Defect Inspection of Long Flat or Curved Work-Pieces Using Rectification Targets

    Tuschl, C., Oswald-Tranta, B. & Eck, S., 8 Jun 2022, In: Applied Sciences : open access journal. 12.2022, 12, 14 p., 5851.

    Research output: Contribution to journal › Article › Research › peer-review

  59. Accepted/In press

    A DIGITAL TWIN FOR DEEP VIBRO GROUND IMPROVEMENT

    Khalilimotlaghkasmaei, N., Ninevski, D., O'Leary, P., Winter, V., Rothschedl, C. J. & Zöhrer, A., 12 Jan 2022, (Accepted/In press).

    Research output: Contribution to conference › Paper › peer-review

  60. Published

    A Computational Framework for Generalized Constrained Inverse Problems

    O'Leary, P. & Ninevski, D., 2022.

    Research output: Contribution to conference › Paper › peer-review

  61. E-pub ahead of print

    A Remote Laboratory for Teaching Internet of Things in Online Education

    Rath, G. & Payr, M., 2022, (E-pub ahead of print) 11th Mediterranean Conference on Embedded Computing (MECO). p. 11-14 (11th Mediterranean Conference on Embedded Computing).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  62. Published

    Characterization and modeling of a typical curing material for photoresist films

    Peng, C., Morak, M., Thalhamer, A., Gschwandl, M., Fuchs, P., Tao, Q., Krivec, T., Antretter, T. & Celigueta, M. A., 2022, 2022 23rd International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2022. Institute of Electrical and Electronics Engineers, (2022 23rd International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2022).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  63. Published

    Hybrid Machine Learning for Anomaly Detection in Industrial Time-Series Measurement Data

    Terbuch, A., O'Leary, P. & Auer, P., 2022, I2MTC 2022 - IEEE International Instrumentation and Measurement Technology Conference: Instrumentation and Measurement under Pandemic Constraints, Proceedings. Institute of Electrical and Electronics Engineers, (Conference Record - IEEE Instrumentation and Measurement Technology Conference).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  64. Published

    Inline NDT for thermoplastic Automated Tape Layup

    Yadav, N., Oswald-Tranta, B. & Schledjewski, R., 2022.

    Research output: Contribution to conference › Poster › Research

  65. Published

    Methodenentwicklung und Software-Implementierung für die automatische Messdatenauswertung einer optischen Profilvermessungsanlage

    Prüller, M., 2022

    Research output: Thesis › Master's Thesis

  66. Published

    Model-Based Approach for Monitoring Yaw Damper Movement

    Lehner, S., 2022

    Research output: Thesis › Master's Thesis

  67. Published

    Optimization of Autoencoders for Anomaly Detection in Multivariate Real-Time Measurement Data Acquired From Production Machinery

    Steiner, G., 2022

    Research output: Thesis › Master's Thesis

  68. Published

    Pavement Macrotexture Evaluation for Tire Test Benches using Surface Profile Measurements

    Handler, J. & O'Leary, P., 2022, 2022 IEEE International Instrumentation and Measurement Technology Conference.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  69. Published

    Probability of detection for short surface cracks using inductive thermography

    Oswald-Tranta, B., Hackl, A., Gorostegui-Colinas, E. & Rosell, A., 2022, 16th Quantitative InfraRed Thermography Conference.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  70. Published

    System Identification under General Norms for Linear Parameter Varying State-Space Systems via Sparse Matrix Methods

    Harker, M. & Rath, G., 2022, 2022 IEEE/SICE International Symposium on System Integration, SII 2022. Institute of Electrical and Electronics Engineers, p. 317-322 6 p. (2022 IEEE/SICE International Symposium on System Integration, SII 2022).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  71. 2021
  72. Published

    Decomposition of a Periodic Perturbed Signal with Unknown Perturbation Frequency by the Method of Variable Projection

    Handler, J., Ninevski, D. & O'Leary, P., 20 Dec 2021, 2021 7th International Conference on Mechanical Engineering and Automation ICMEAS 2021. Institute of Electrical and Electronics Engineers

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  73. Published

    Instrumentation of an Inspection Test Rig for Geometry Measurement of Fiber Bundles in Automated Composite Manufacturing

    Neunkirchen, S., Fauster, E., Lehner, S. & O'Leary, P., 13 Dec 2021, In: IEEE transactions on instrumentation and measurement. 71

    Research output: Contribution to journal › Special issue › Research › peer-review

  74. Published

    Dynamic Verification of a Static Calibrated 3-Axis Accelerometer Using a Slider-Crank Mechanism and the Method of Variable Projection

    Rollett, M., Theußl, E., Lang, E. & O'Leary, P., 31 Oct 2021, In: Sensors & transducers. 2021, Volume 252 Issue 5, p. 1-11 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  75. E-pub ahead of print

    Ply-by-ply inline thermography inspection for thermoplastic automated tape layup

    Yadav, N., Oswald-Tranta, B., Schledjewski, R. & Wachtarczyk, K., 13 Sept 2021, (E-pub ahead of print) In: Advanced Manufacturing: Polymer and Composites Science. 7.2021, 3-4, p. 49-59 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  76. E-pub ahead of print

    Detection and characterisation of short fatigue cracks by inductive thermography

    Oswald-Tranta, B., 28 Jul 2021, (E-pub ahead of print) In: Quantitative InfraRed Thermography Journal. 2021, 22 p.

    Research output: Contribution to journal › Article › Research › peer-review

  77. Published

    Development and Hardware-in-the-Loop Simulation of an Air Purifier Automatic Control System

    Babunski, D., Zaev, E., Poposki, F., Koleva, R. & Rath, G., 7 Jun 2021, 2021 10th Mediterranean Conference on Embedded Computing, MECO 2021. Institute of Electrical and Electronics Engineers, 9460141. (2021 10th Mediterranean Conference on Embedded Computing, MECO 2021).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  78. Published

    Hardware-in-the-loop for Simulation and Control of Greenhouse Climate

    Zaev, E., Babunski, D., Jovanov, A., Rath, G. & Payr, M. P., 7 Jun 2021, 2021 10th Mediterranean Conference on Embedded Computing, MECO 2021. Budva: Institute of Electrical and Electronics Engineers, 9460206. (2021 10th Mediterranean Conference on Embedded Computing, MECO 2021).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  79. Published

    The Detection and Characterization of Defects in Metal/Non-metal Sandwich Structures by Thermal NDT, and a Comparison of Areal Heating and Scanned Linear Heating by Optical and Inductive Methods

    Chulkov, A. O., Tuschl, C., Nesteruk, D. A., Oswald-Tranta, B., Vavilov, V. P. & Kuimova, M. V., 21 May 2021, In: Journal of Nondestructive Evaluation. 2021, 40, p. 44-56 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  80. Published

    Estimating Parameters of a Sine Wave by the Method of Variable Projection

    O'Leary, P. & Ninevski, D., 17 May 2021, I2MTC 2021 - IEEE International Instrumentation and Measurement Technology Conference, Proceedings. Institute of Electrical and Electronics Engineers, 9459842. (Conference Record - IEEE Instrumentation and Measurement Technology Conference; vol. 2021-May).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  81. Published

    Instrumentation of a Roving Inspection Test Rig with Surface Geometry Measurement of Fiber Bundles

    Lehner, S., Neunkirchen, S., Fauster, E. & O'Leary, P., 17 May 2021, I2MTC 2021 - IEEE International Instrumentation and Measurement Technology Conference, Proceedings. IEEE Xplore (online): Institute of Electrical and Electronics Engineers, 9459889. (Conference Record - IEEE Instrumentation and Measurement Technology Conference; vol. 2021-May).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  82. Published

    Electro-Thermo-Mechanical Reliability Assessment of Arbitrary Power Electronics

    Gschwandl, M., Pfost, M., Antretter, T., Fuchs, P. F., Mitev, I., Tao, Q. & Schingale, A., 19 Apr 2021, 2021 22nd International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2021. Institute of Electrical and Electronics Engineers, 9410862. (2021 22nd International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2021).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  83. Published

    Multidimensional Path Tracking With Global Least Squares Solution

    Handler, J., Harker, M. & Rath, G., 14 Apr 2021, In: IFAC-PapersOnLine. 53.2020, 2, p. 6189-6194 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  84. Published

    Knowledge Incorporation for Machine Learning in Condition Monitoring: A Survey

    Hagendorfer, E. J., 19 Feb 2021, Proceedings - 2021 International Symposium on Electrical, Electronics and Information Engineering, ISEEIE 2021. Association for Computing Machinery (ACM), p. 230-240 11 p. (ACM International Conference Proceeding Series).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  85. Published

    Sensor-based Particle Size Determination of Shredded Mixed Commercial Waste based on two-dimensional Images

    Kandlbauer, L., Khodier, K., Ninevski, D. & Sarc, R., 1 Feb 2021, In: Waste management. 120.2021, 1 February, p. 784-794 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  86. Published

    Inductive Thermography as Non-Destructive Testing for Railway Rails

    Tuschl, C., Oswald‐Tranta, B. & Eck, S., 22 Jan 2021, In: Applied Sciences : open access journal. 11.2021, 3, 17 p., 1003.

    Research output: Contribution to journal › Article › Research › peer-review

  87. Published

    A Positioning System for Mobile Equipment based on Ultra Wideband Radio

    Plessing, L., 2021

    Research output: Thesis › Master's Thesis

  88. Published

    Design of Pressure Control for Optimal Damping in Individual Metering Systems

    Rath, G., Zaev, E., Stojanoski, G. & Babunski, D., 2021.

    Research output: Contribution to conference › Paper › peer-review

  89. Published

    Detection of subsurface cracks using inductive thermography

    Oswald-Tranta, B., Tuschl, C. & Hackl, A., 2021, Thermosense: Thermal Infrared Applications XLIII. Zalameda, J. N. (ed.). SPIE, The Internat. Soc. for Optical Engineering, Vol. 11743. 117430G. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 11743).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  90. Published

    Development and Hardware-in-the-Loop Simulation of an Air Purifier Automativ Control System

    Zaev, E., Babunski, D., Jovanovic, D., Rath, G. & Payr, M., 2021, p. 445. 448 p.

    Research output: Contribution to conference › Paper › peer-review

  91. Published

    Future Distributed Geomonitoring Analysis Methods, Algorithms & Technologies

    Schmidt, R., 2021

    Research output: Thesis › Doctoral Thesis

  92. Published

    Generalization and Benchmarking of a Nonparametric Method for Derivative Discontinuity Detection

    Deutsch, K. H., 2021

    Research output: Thesis › Master's Thesis

  93. Published

    Hyper Resolution Image Mosaics for the Remote Visual Inspection of Deep Vertical Mineshafts

    König, J., 2021

    Research output: Thesis › Doctoral Thesis

  94. Published

    LSTM Hyperparameter Optimization: Impact of the Selection of Hyperparameters on Machine Learning Performance when applied to Time Series in Physical Systems

    Terbuch, A., 2021

    Research output: Thesis › Master's Thesis

  95. Published

    Machine Learning and KPI Analysis applied to Time-Series Data in Physical Systems: Comparison and Combination

    Haider, M., 2021

    Research output: Thesis › Master's Thesis

  96. Published

    Multidimensional Trajectory Tracking for Numerically Stiff Independent Metering System

    Stojanoski, G., Ninevski, D., Rath, G. & Harker, M., 2021.

    Research output: Contribution to conference › Paper › peer-review

  97. Published

    Rissdetektion an Eisenbahnschienen mittels Induktivthermografie

    Tuschl, C., 2021

    Research output: Thesis › Master's Thesis

  98. Published

    Sensor and Sensor-Data Fusion for Dynamic Reconfigurable Cyber Physical Systems

    Theußl, E., 2021

    Research output: Thesis › Doctoral Thesis

  99. Published

    Sensorless Temperature Control in a Metal Forming Process

    Löbl, P., 2021

    Research output: Thesis › Master's Thesis

  100. Published

    Static Calibration and Dynamic Verifiation of a 3-Axis Accelerometer using the Method of Variable Projection

    Lang, E., Rollett, M., Theußl, E. & O'Leary, P., 2021.

    Research output: Contribution to conference › Paper › peer-review

  101. 2020
  102. Published

    A novel method for solving an optimal control problem for a numerically stiff independent metering system

    Stojanoski, G., Ninevski, D., Rath, G. & Harker, M., 26 Nov 2020, 2020 Australian and New Zealand Control Conference, ANZCC 2020. Institute of Electrical and Electronics Engineers, p. 108-113 6 p. 9318391. (2020 Australian and New Zealand Control Conference, ANZCC 2020).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  103. Published

    Unified Software Interface for Numerical Evaluation of Integrals and Derivatives of Fractional Order

    Skovranek, T., Harker, M., Podlubny, I., O'Leary, P. & Petras, I., 27 Oct 2020, Proceedings of the 2020 21st International Carpathian Control Conference, ICCC 2020. Petras, I. & Kacur, J. (eds.). Institute of Electrical and Electronics Engineers, 9257225. (Proceedings of the 2020 21st International Carpathian Control Conference, ICCC 2020).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  104. Accepted/In press

    Detection of Derivate Descontinuities in Observational Data

    Ninevski, D. & O'Leary, P., Aug 2020, (Accepted/In press) Journal of Electrical and Electronic Engineering. (Journal of Electrical and Electronic Engineering).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  105. E-pub ahead of print

    Hyper resolution image mosaics with unbounded vertical field of view

    Koenig, J. & O'Leary, P., 21 Jul 2020, (E-pub ahead of print) In: Computers in industry. 122.2020, November, 8 p., 103281.

    Research output: Contribution to journal › Article › Research › peer-review

  106. Published

    A Miniature Multi-sensor System and it's Application in a Condition Monitoring

    Rollett, M., Theußl, E., O'Leary, P., Fruhmann, R. & Ellensohn, B., 2020.

    Research output: Contribution to conference › Paper › peer-review

Previous 1 2 3 4 5 6 7 Next
View graph of relations

Contact information

Peter-Tunner-Straße 25/II, 8700 Leoben
  • Main phone number: +43 3842 402 5301