Surface & coatings technology, 0257-8972
Journal
ISSNs | 0257-8972 |
---|---|
Additional searchable ISSN (electronic) | 0257-8972 |
Research output
- 2003
- Published
Structure and mechanical properties of magnetron sputtered Zr-Ti-Cu-N films
Musil, J. & Daniel, R., 2003, In: Surface & coatings technology.Research output: Contribution to journal › Article › Research › peer-review
- 2004
- Published
A new low friction concept for Ti1-xAlxN based coatings in high temperature applications
Kutschej, K., Mayrhofer, P. H., Mitterer, C., Polcik, P. & Kathrein, M., 2004, In: Surface & coatings technology. 188-189, p. 358-363Research output: Contribution to journal › Article › Research › peer-review
- Published
Calorimetric evidence for frictional self-adaptation of TiAlN/VN superlattice coatings
Mayrhofer, P. H., Hovsepian, P. E., Mitterer, C. & Münz, W-D., 2004, In: Surface & coatings technology. 177-178, p. 341-347Research output: Contribution to journal › Article › Research › peer-review
- Published
Pulsed laser decomposition of silicon containing carbon thin films
Lackner, J. M., Waldhauser, W., Ebner, R., Fian, A., Jakopic, G., Leising, G. & Schöberl, T., 2004, In: Surface & coatings technology. 177-178, p. 360-364Research output: Contribution to journal › Article › Research › peer-review
- Published
Pulsed laser decomposition of titanium oxide coatings at room temperature - structural and tribological properties
Lackner, J. M., Waldhauser, W., Ebner, R., Major, B. & Schöberl, T., 2004, In: Surface & coatings technology. 180-181, p. 585-590Research output: Contribution to journal › Article › Research › peer-review
- Published
Room temperature deposition of (Ti,Al)N and (Ti,Al)(C,N) coatings by pulsed laser deposition for tribological applications
Lackner, J. M., Waldhauser, W., Ebner, R., Keckes, J. & Schöberl, T., 2004, In: Surface & coatings technology. 177-178, p. 447-452Research output: Contribution to journal › Article › Research › peer-review
- 2005
- Published
Comparative study of Ti1-xAlxN coatings alloyed with Hf, Nb, and B
Kutschej, K., Fateh, N., Mayrhofer, P., Kathrein, M., Polcik, P. & Mitterer, C., 2005, In: Surface & coatings technology. 200, p. 113-117Research output: Contribution to journal › Article › Research › peer-review
- Published
Influence of hydrogen sulfide addition on the alumina deposition by plasma CVD
Fink, M., Laimer, J., Störi, H. & Mitterer, C., 2005, In: Surface & coatings technology. 200, p. 360-363Research output: Contribution to journal › Article › Research › peer-review
- Published
Influence of oxide phase formation on the tribological behaviour of Ti-Al-V-N coatings
Kutschej, K., Mayrhofer, P., Kathrein, M., Polcik, P. & Mitterer, C., 2005, In: Surface & coatings technology. 200, p. 1731-1737Research output: Contribution to journal › Article › Research › peer-review
- Published
Influences of the nitrogen content on the morphological, chemical and optical properies of pulsed laser deposited silicon nitride thin films
Lackner, J., Waldhauser, W., Berghauser, R., Ebner, R., Beutl, M., Jakopic, G., Leising, G., Hutter, H., Rosner, M. & Schöberl, T., 2005, In: Surface & coatings technology. 192, p. 225-230Research output: Contribution to journal › Article › Research › peer-review
- Published
Multifunctional multi-component PVD coatings for cutting tools
Kathrein, M., Michotte, C., Penoy, M., Polcik, P. & Mitterer, C., 2005, In: Surface & coatings technology. 200, p. 1867-1871Research output: Contribution to journal › Article › Research › peer-review
- Published
Performance of nano-structured multilayer PVD coating TiAlN/VN in dry high speed milling of aerospace aluminium 7010-T7651
Luo, Q., Robinson, G., Pittman, M., Howarth, M., Sim, W-M., Stalley, M. R., Leitner, H., Ebner, R., Caliskanoglu, Z. D. & Hovsepian, P. E., 2005, In: Surface & coatings technology. 200, p. 123-127Research output: Contribution to journal › Article › Research › peer-review
- Published
Structure, mechanical and tribological properties for sputtered Ti1-xAlxN coatings with 0.5
Kutschej, K., Mayrhofer, P. H., Kathrein, M., Polcik, P., Tessadri, R. & Mitterer, C., 2005, In: Surface & coatings technology. 200, p. 2358-2365Research output: Contribution to journal › Article › Research › peer-review
- Published
Structure-property relations in Cr-C/a-C:H deposited by reactive magnetron sputtering
Gassner, G., Mayrhofer, P., Mitterer, C. & Kiefer, J., 2005, In: Surface & coatings technology. 200, p. 1147-1150Research output: Contribution to journal › Article › Research › peer-review
- 2006
- Published
Crystallographic aspects related to advanced tribological multilayers of Cr/CrN and Ti/TiN types produced by pulsed laser deposition (PLD)
Major, L., Morgiel, J., Major, B., Lackner, J. M., Waldhauser, W., Ebner, R., Nistor, L. & Van Tendeloo, G., 2006, In: Surface & coatings technology. 200, p. 6190-6195Research output: Contribution to journal › Article › Research › peer-review
- Published
High-temperature oxidation resistance of Ta-Si-N films with a high Si content
Zeman, P., Musil, J. & Daniel, R., 2006, In: Surface & coatings technology.Research output: Contribution to journal › Article › Research › peer-review
- Published
Magnéli phase formation of PVD Mo-N and W-N coatings
Gassner, G., Mayrhofer, P. H., Kutschej, K., Mitterer, C. & Kathrein, M., 2006, In: Surface & coatings technology. 201, p. 3335-3341Research output: Contribution to journal › Article › Research › peer-review
- Published
Properties of reactively sputtered W-Si-N films
Musil, J., Daniel, R., Soldán, J. & Zeman, P., 2006, In: Surface & coatings technology.Research output: Contribution to journal › Article › Research › peer-review
- Published
The influence of boron content on the tribological performance of Ti-N-B coatings prepared by thermal CVD
Wagner, J., Hochauer, D., Mitterer, C., Penoy, M., Michotte, C., Wallgram, W. & Kathrein, M., 2006, In: Surface & coatings technology. 201, p. 4247-4252Research output: Contribution to journal › Article › Research › peer-review
- Published
Thermal stability of magnetron sputtered Zr–Si–N films
Daniel, R., Musil, J., Zeman, P. & Mitterer, C., 2006, In: Surface & coatings technology. 201, p. 3368-3376Research output: Contribution to journal › Article › Research › peer-review
- Published
tructure-property-performance relations of high-rate reactive arc-evaporated Ti-B-N nanocomposite coatings
Neidhardt, J., Sullivan, M. O., Reiter, A. E., Rechberger, W., Grogger, W. & Mitterer, C., 2006, In: Surface & coatings technology. 201, p. 2553-2559Research output: Contribution to journal › Article › Research › peer-review
- 2007
- Published
Annealing of intrinsic stresses in sputtered TiN films: The role of thickness-dependent gradients of point defect density
Köstenbauer, H., Fontalvo, G., Kapp, M., Keckes, J. & Mitterer, C., 2007, In: Surface & coatings technology. 201, p. 4777-4780Research output: Contribution to journal › Article › Research › peer-review
- Published
Finite Element Simulation of the Effect of surface roughness on nanoindentation of thin films with spherical indenters
Walter, C., Antretter, T., Daniel, R. & Mitterer, C., 2007, In: Surface & coatings technology. 202, p. 1103-1107Research output: Contribution to journal › Article › Research › peer-review
- Published
Hard and superhard TiAlBN coatings deposited by twin electron-beam evaporation
Rebholz, C., Monclus, M. A., Baker, M. A., Mayrhofer, P. H., Gibson, P. N., Leyland, A. & Matthews, A., 2007, In: Surface & coatings technology. 13, p. 6078-6083Research output: Contribution to journal › Article › Research › peer-review
- Published
High-temperature tribological behavior of sputtered NbNx thin films
Fontalvo, G., Terziyska, V. & Mitterer, C., 2007, In: Surface & coatings technology. 202, p. 1017-1022Research output: Contribution to journal › Article › Research › peer-review
- Published
The influence of bias voltage on structure and mechanical/tribological properties of arc evaporated Ti-Al-V-N coatings
Pfeiler, M., Kutschej, K., Penoy, M., Michotte, C., Mitterer, C. & Kathrein, M., 2007, In: Surface & coatings technology. 202, p. 1050-1054Research output: Contribution to journal › Article › Research › peer-review
- Published
Thermal stability of superhard Ti-B-N coatings
Mayrhofer, P. H. & Stoiber, M., 2007, In: Surface & coatings technology. 201, p. 6148-6153Research output: Contribution to journal › Article › Research › peer-review
- 2008
- Published
Effect of nitrogen-incorporation on structure, properties and performance of magnetron sputtered CrB2
Budna, K., Mayrhofer, P. H., Neidhardt, J., Hegedus, E., Kovacs, I., Toth, L., Pecz, B. & Mitterer, C., 2008, In: Surface & coatings technology. 202, p. 3088-3093Research output: Contribution to journal › Article › Research › peer-review
- Published
Influence of bipolar pulsed DC magnetron sputtering on elemental composition and micro-structure of Ti-Al-Y-N thin films
Moser, M., Mayrhofer, P. H., Székely, L., Sáfrán, G. & Barna, P. B., 2008, In: Surface & coatings technology. 203, p. 148-155Research output: Contribution to journal › Article › Research › peer-review
- Published
Structure and phase evolution of Cr-Al-N coatings during annealing
Mayrhofer, P. H., Willmann, H. & Reiter, A. E., 2008, In: Surface & coatings technology. 202, p. 4935-4938Research output: Contribution to journal › Article › Research › peer-review
- Published
Structure-property relations of arc-evaporated Al-Cr-Si-N coatings
Soldan, J., Neidhardt, J., Sartory, B., Kaindl, R., Cerstvy, R., Mayrhofer, P. H., Tessadri, R., Polcik, P., Lechthaler, M. & Mitterer, C., 2008, In: Surface & coatings technology. 202, p. 3555-3562Research output: Contribution to journal › Article › Research › peer-review
- Published
Synthesis-structure relations for reactive magnetron sputtered V2O5 films
Fateh, N., Fontalvo, G., Cha, L., Klünsner, T., Hlawacek, G., Teichert, C. & Mitterer, C., 2008, In: Surface & coatings technology. 202, p. 1551-1555Research output: Contribution to journal › Article › Research › peer-review
- Published
The effect of yttrium incorporation on the oxidation resistance of Cr-Al-N coatings
Rovere, F., Mayrhofer, P. H., Reinholdt, A., Mayer, J. & Schneider, J. M., 2008, In: Surface & coatings technology. 202, p. 5870-5875Research output: Contribution to journal › Article › Research › peer-review
- Published
The influence of age-hardening on turning and milling performance of Ti–Al–N coated inserts
Chen, L., Du, Y., Mayrhofer, P. H., Wang, S. Q. & Li, J., 2008, In: Surface & coatings technology. 202, p. 5158-5161Research output: Contribution to journal › Article › Research › peer-review
- Published
Titanium doped CVD alumina coatings
Hochauer, D., Mitterer, C., Penoy, M., Michotte, C., Martinz, H-P. & Kathrein, M., 2008, In: Surface & coatings technology. 203, p. 350-356Research output: Contribution to journal › Article › Research › peer-review
- 2009
- Published
3D versus 2D finite element simulation of the effect of surface roughness on nanoindentation of hard coatings
Walter, C. & Mitterer, C., 2009, In: Surface & coatings technology. 203, p. 3286-3290Research output: Contribution to journal › Article › Research › peer-review
- Published
Improved oxidation resistance of TiAlN coatings by doping with Si or B
Pfeiler, M., Zechner, J., Penoy, M., Michotte, C., Mitterer, C. & Kathrein, M., 2009, In: Surface & coatings technology. 203, p. 3104-3110Research output: Contribution to journal › Article › Research › peer-review
- Published
Influence of phase transition on the tribological performance of arc-evaporated AlCrVN hard coatings
Franz, R., Neidhardt, J., Kaindl, R., Sartory, B., Tessadri, R., Lechthaler, M., Polcik, P. & Mitterer, C., 2009, In: Surface & coatings technology. 203, p. 1101-1105Research output: Contribution to journal › Article › Research › peer-review
- Published
Interface fracture properties of thin films studied by using the micro-cantilever deflection technique
Matoy, K., Detzel, T., Müller, M., Motz, C. & Dehm, G., 2009, In: Surface & coatings technology. 204, p. 878-881Research output: Contribution to journal › Article › Research › peer-review
- Published
The nanostructure wear and corrosion performance of arc-evaporated CrBxNy nanocomposite coatings
Polychronopoulou, K., Baker, M. A., Rebholz, C., Neidhardt, J., O 'Sullivan, M., Reiter, A., Kanakis, K., Leyland, A., Matthews, A. & Mitterer, C., 2009, In: Surface & coatings technology. p. 246-255Research output: Contribution to journal › Article › Research › peer-review
- 2010
- Published
Atom probe specimen preparation and 3D interfacial study of Ti-Al-N thin films
Rachbauer, R., Massl, S., Stergar, E., Felfer, P. & Mayrhofer, P. H., 2010, In: Surface & coatings technology. 204, p. 1811-1816Research output: Contribution to journal › Article › Research › peer-review
- Published
Structure, mechanical properties and oxidation behaviour of arc-evaporated NbAlN hard coatings
Franz, R., Lechthaler, M., Polzer, C. & Mitterer, C., 2010, In: Surface & coatings technology. 204, p. 2447-2453Research output: Contribution to journal › Article › Research › peer-review
- Published
Structure-property relations in ZrCN coatings for tribological applications
Silva, E., Rebelo De Figueiredo, M., Franz, R., Escobar Galindo, R., Palacio, C., Espinosa, A., Calderon, S., Mitterer, C. & Carvalho, S., 2010, In: Surface & coatings technology. 205, p. 2134-2141Research output: Contribution to journal › Article › Research › peer-review
- Published
Thermal stability of sputtered Al2O3 coatings
Edlmayr, V., Moser, M., Walter, C. & Mitterer, C., 2010, In: Surface & coatings technology. 204, p. 1576-1581Research output: Contribution to journal › Article › Research › peer-review
- Published
Thermally-induced formation of hexagonal AlN in AlCrN hard coatings on sapphire: Orientation relationships and residual stresses
Bartosik, M., Daniel, R., Mitterer, C. & Keckes, J., 2010, In: Surface & coatings technology. 205, p. 1320-1323Research output: Contribution to journal › Article › Research › peer-review
- Published
Thernal stability of doped CVD K-Al2O3 coatings
Hochauer, D., Mitterer, C., Penoy, M., Michotte, C., Martinz, H-P. & Kathrein, M., 2010, In: Surface & coatings technology. 204, p. 3713-3722Research output: Contribution to journal › Article › Research › peer-review
- 2011
- Published
A comparative study on Ti1-xAlxN coatings reactively sputtered from compound and from mosaic targets
Schalk, N., Weirather, T., Polzer, C., Polcik, P. & Mitterer, C., 2011, In: Surface & coatings technology. 205, p. 4705-4710Research output: Contribution to journal › Article › Research › peer-review
- Published
CO addition in low-pressure chemical vapour deposition of medium-temperature TiCxN1-x based hard coatings
Czettl, C., Mitterer, C., Mühle, U., Rafaja, D., Puchner, S., Hutter, H., Penoy, M., Michotte, C. & Kathrein, M., 2011, In: Surface & coatings technology. 206, p. 1691-1697Research output: Contribution to journal › Article › Research › peer-review
- Published
Cathodic arc deposition of (Al,Cr)2O3: Macroparticles and cathode surface modifications
Pohler, M., Franz, R., Ramm, J., Polic, P. & Mitterer, C., 2011, In: Surface & coatings technology. 206, p. 1454-1460Research output: Contribution to journal › Article › Research › peer-review
- Published
Composition, microstructure and mechanical properties of boron containing multilayer coatings for hot forming tools
Paschke, H., Stüber, M., Ziebert, C., Bistron, M. & Mayrhofer, P. H., 2011, In: Surface & coatings technology. 205, p. 24-28Research output: Contribution to journal › Article › Research › peer-review
- Published
Microstructure-property relations of reactively magnetron sputtered VCxNy films
Mitterer, C., Fateh, N. & Munnik, F., 2011, In: Surface & coatings technology. p. 3805-3809Research output: Contribution to journal › Article › Research › peer-review
- Published
Phase stability and alloy-related trends in Ti-Al-N, Zr-Al-N and Hf-Al-N systems from first principles
Holec, D., Rachbauer, R., Chen, L., Wang, L., Luef, D. & Mayrhofer, P. H., 2011, In: Surface & coatings technology. 206, p. 1698-1704Research output: Contribution to journal › Article › Research › peer-review
- Published
The effect of film thickness variations in peridic cracking: Analysis and experiments
Taylor, A. A., Edlmayr, V., Cordill, M. & Dehm, G., 2011, In: Surface & coatings technology. 206, p. 1830-1836Research output: Contribution to journal › Article › Research › peer-review
- Published
The effect of temperature and strain rate on the periodic cracking of amorphous AlxOy films on Cu
Taylor, A. A., Edlmayr, V., Cordill, M. & Dehm, G., 2011, In: Surface & coatings technology. 206, p. 1855-1859Research output: Contribution to journal › Article › Research › peer-review
- 2012
- Published
Carbon doped alpha-Al2O3 coatings grown by chemical vapor deposition
Hochauer, D., Mitterer, C., Penoy, M., Puchner, S., Michotte, C., Martinz, H. P., Hutter, H. & Kathrein, M., 2012, In: Surface & coatings technology. 206, p. 4771-4777Research output: Contribution to journal › Article › Research › peer-review
- Published
Duplex processing for increased adhesion of sputter deposited Ti1-xAlxN coatings on a Fe-25%Co-15%Mo tool material
Weirather, T., Fian, A., Sartory, B., Caliskanoglu, D., Kölker, W. & Mitterer, C., 2012, In: Surface & coatings technology. 206, p. 3601-3606Research output: Contribution to journal › Article › Research › peer-review
- Published
Effect of Hf on structure and age hardening of Ti-Al-N thin films
Rachbauer, R., Blutmager, A., Holec, D. & Mayrhofer, P. H., 2012, In: Surface & coatings technology. 206, p. 2667-2672Research output: Contribution to journal › Article › Research › peer-review
- Published
Increased thermal stability of Ti-Al-N thin films by Ta alloying
Rachbauer, R., Holec, D. & Mayrhofer, P. H., 2012, In: Surface & coatings technology. 211, p. 98-103Research output: Contribution to journal › Article › Research › peer-review
- Published
Influence of residual stresses and grain size on the spinodal decomposition of metastable Ti1-xAlxN coatings
Schalk, N., Mitterer, C., Keckes, J., Penoy, M. & Michotte, C., 2012, In: Surface & coatings technology. 209, p. 190-196Research output: Contribution to journal › Article › Research › peer-review
- Published
Lateral gradients of phases, residual stress and hardness in a laser heated Ti0.52Al0.48N coating on hard metal
Bartosik, M., Daniel, R., Zhang, Z., Deluca, M., Ecker, W., Steffenelli, M., Klaus, M., Genzel, C., Stefenelli, M., Mitterer, C. & Keckes, J., 2012, In: Surface & coatings technology. 206, p. 4502-4510 9 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Microstructure and mechanical properties of nanocrystalline Al-Cr-B-N thin films
Tritremmel, C., Daniel, R., Lechthaler, M., Rudigier, H., Polcik, P. & Mitterer, C., 2012, In: Surface & coatings technology. 213, p. 1-7Research output: Contribution to journal › Article › Research › peer-review
- Published
Microstructure modifications of CrN coatings by pulsed bias sputtering
Grasser, S., Daniel, R. & Mitterer, C., 2012, In: Surface & coatings technology. 206, p. 4666-4671Research output: Contribution to journal › Article › Research › peer-review
- Published
Oxidation behaviour and tribological properties of arc-evaporated ZrAlN hard coatings
Franz, R., Lechthaler, M., Polcik, P. & Mitterer, C., 2012, In: Surface & coatings technology. 206, p. 2337-2345Research output: Contribution to journal › Article › Research › peer-review
- Published
Thermal stability and oxidation resistance of Ti-Al-N coatings
Chen, L., Paulitsch, J., Du, Y. & Mayrhofer, P. H., 2012, In: Surface & coatings technology. 206, p. 2954-2960Research output: Contribution to journal › Article › Research › peer-review
- 2013
- Published
C2H6 as precursor for low pressure chemical vapor deposition of TiCNB hard coatings
Czettl, C., Mitterer, C., Penoy, M., Michotte, C. & Kathrein, M., 2013, In: Surface & coatings technology. 215, p. 127-132Research output: Contribution to journal › Article › Research › peer-review
- Published
Industrial-scale sputter deposition of Cr1-xAlxN coatings with 0.21<x <0.74 from segmented targets
Weirather, T., Czettl, C., Polcik, P., Kathrein, M. & Mitterer, C., 2013, In: Surface & coatings technology. 232, p. 303-310Research output: Contribution to journal › Article › Research › peer-review
- Published
Influence of Fe impurities on structure and properties of arc-evaporated AlCrN coatings
Mühlbacher, M., Franz, R., Paulitsch, J., Rudigier, H., Polcik, P., Mayrhofer, P. H. & Mitterer, C., 2013, In: Surface & coatings technology. 215, p. 96-103Research output: Contribution to journal › Article › Research › peer-review
- Published
Phase stability, mechanical properties and thermal stability of Y alloyed Ti-Al-N coatings
Riedl, H., Holec, D., Rachbauer, R., Polcik, P., Hollerweger, R., Paulitsch, J. & Mayrhofer, P. H., 2013, In: Surface & coatings technology. 235, p. 174-180Research output: Contribution to journal › Article › Research › peer-review
- Published
V-alloyed ZrO2 coatings with temperature homogenization function for high-temperature sliding contacts
Jantschner, O., Walter, C., Muratore, C., Voevodin, A. A. & Mitterer, C., 2013, In: Surface & coatings technology. 228, p. 76-83Research output: Contribution to journal › Article › Research › peer-review
- Published
Vanadium containing self-adaptive low-friction hard coatings for high-temperature applications: a review
Franz, R. & Mitterer, C., 2013, In: Surface & coatings technology. 228, p. 1-13Research output: Contribution to journal › Article › Research › peer-review
- 2014
- Published
A combinatorial X-ray sub-micron diffraction study of microstructure, residual stress and phase stability in TiAlN coatings
Riedl, A., Daniel, R., Todt, J., Steffenelli, M., Holec, D., Sartory, B., Krywka, C., Müller, M., Mitterer, C. & Keckes, J., 2014, In: Surface & coatings technology. 257, p. 108-113Research output: Contribution to journal › Article › Research › peer-review
- Published
Crossover of texture and morphylogy in (Ti1-xAlx)1 - yYyN alloy films and the pathway of structure evolution
Szekely, L., Safran, G., Kis, V., Horvat, Z. E., Mayrhofer, P. H., Moser, M., Radnoczi, G., Misjak, F. & Barna, P. B., 2014, In: Surface & coatings technology. 257, p. 3-14Research output: Contribution to journal › Article › Research › peer-review
- Published
Increased thermal stability of Ti1-xAlxN/TiN multilayer coatings through high temperature sputter deposition on powder-metallurgical high-speed steels
Weirather, T., Chladil, K., Sartory, B., Caliskanoglu, D., Cremer, R., Kölker, W. & Mitterer, C., 2014, In: Surface & coatings technology. 257, p. 48-57Research output: Contribution to journal › Article › Research › peer-review
- Published
Investigation of the origin of compressive residual stress in CVD TiB2 hard coatings using synchrotron X-ray nanodiffraction
Schalk, N., Keckes, J., Czettl, C., Burghammer, M., Penoy, M., Michotte, C. & Mitterer, C., 2014, In: Surface & coatings technology. 258, p. 121-126Research output: Contribution to journal › Article › Research › peer-review
- Published
Mechanical and tribological properties of Al - Ti - N/Al - Cr - B -N multilayer films synthesized by cathodic arc evaporation
Tritremmel, C., Daniel, R., Rudigier, H., Pocik, P. & Mitterer, C., 2014, In: Surface & coatings technology. 246, p. 57-63Research output: Contribution to journal › Article › Research › peer-review
- Published
Mechanisms of topography formation of magnetron-sputtered chromium-based coatings on epoxy polymer composites
Lackner, J. M., Waldhauser, W., Ganser, C., Teichert, C., Kot, M. & Major, L., 2014, In: Surface & coatings technology. 241, p. 80-85Research output: Contribution to journal › Article › Research › peer-review
- Published
Origin of high temperature oxidation resistance of Ti-Al-Ta-N coatings
Hollerweger, R., Riedl, H., Paulitsch, J., Arndt, M., Rachbauer, R., Polcik, P., Primig, S. & Mayrhofer, P. H., 2014, In: Surface & coatings technology. 257, p. 78-86Research output: Contribution to journal › Article › Research › peer-review
- Published
Structural and mechanical evolution of reactively and non-reactively sputterd Zr-Al-N thin films during annealing
Mayrhofer, P. H., Sonnleitner, D., Bartosik, M. & Holec, D., 2014, In: Surface & coatings technology. 244, p. 52-56Research output: Contribution to journal › Article › Research › peer-review
- Published
Superior oxidation resistance, mechanical properties and residual stresses of an Al-rich nanolamellar Ti0.05Al0.95N coating prepared by CVD
Todt, J., Pitonak, R., Köpf, A., Weißenbacher, R., Sartory, B., Burghammer, M., Daniel, R., Schöberl, T. & Keckes, J., 2014, In: Surface & coatings technology. 258.2014, November, p. 1119-1127Research output: Contribution to journal › Article › Research › peer-review
- Published
The effect of droplets in arc evaporated TiAlTaN hard coatings on the wear behavior
Tkadletz, M., Mitterer, C., Sartory, B., Letovsky-Papst, I., Czettl, C. & Michotte, C., 2014, In: Surface & coatings technology. 257, p. 95-101Research output: Contribution to journal › Article › Research › peer-review
- 2015
- Published
Element- and charge-state-resolved ion energies in the cathodic arc plasma from composite AlCr cathodes in argon, nitrogen and oxygen atmospheres
Franz, R., Polcik, P. & Anders, A., 2015, In: Surface & coatings technology. 272, p. 309-321Research output: Contribution to journal › Article › Research › peer-review
- Published
Influence of pulsed bias duty cycle variations on structural and mechanical properties of arc evaporated (Al,Cr)2O3 coatings
Pohler, M., Franz, R., Ramm, J., Polcik, P. & Mitterer, C., 2015, In: Surface & coatings technology. 282, p. 43-51Research output: Contribution to journal › Article › Research › peer-review
- Published
Residual stress gradients in alpha-Al2O3 hard coatings determined by pencil-beam X-ray nanodiffraction: The influence of blasting media
Tkadletz, M., Keckes, J., Schalk, N., Krajinovic, I., Burghammer, M., Czettl, C. & Mitterer, C., 2015, In: Surface & coatings technology. 262, p. 134-140Research output: Contribution to journal › Article › Research › peer-review
- Published
Residual stress gradients in α-Al2O3 hard coatings determined by pencil-beam X-ray nanodiffraction: The influence of blasting media
Tkadletz, M., Keckes, J., Schalk, N., Krajinovic, I., Burghammer, M., Czettl, C. & Mitterer, C., 2015, In: Surface & coatings technology. 262, p. 134 - 140 7 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Restrictions of stress measurements using the curvature method by thermally induced plastic deformation of silicon substrates
Saringer, C., Tkadletz, M. & Mitterer, C., 25 Jul 2015, In: Surface & coatings technology. 274, p. 68-75 8 p.Research output: Contribution to journal › Article › Research › peer-review
- 2016
- Published
Advanced characterization methods for wear resistant hard coatings: A review on recent progress
Tkadletz, M., Schalk, N., Daniel, R., Keckes, J., Czettl, C. & Mitterer, C., 2016, In: Surface & coatings technology. 285, p. 31-46 16 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Al-rich cubic Al0.8Ti0.2N coating with self-organized nano-lamellar microstructure: Thermal and mechanical properties
Todt, J., Zalesak, J., Daniel, R., Pitonak, R., Köpf, A., Weißenbacher, R., Sartory, B., Mitterer, C. & Keckes, J., 2016, In: Surface & coatings technology. 291, p. 89-93 5 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Energy consumption and material fluxes in hard coating deposition processes
Gassner, M., Rebelo De Figueiredo, M., Schalk, N., Franz, R., Weiß, C., Rudigier, H., Holzschuh, H., Bürgin, W., Pohler, M., Czettl, C. & Mitterer, C., 2016, In: Surface & coatings technology. 299, p. 49-55 7 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Finite element study of the influence of hard coatings on hard metal tool loading during milling
Krajinovic, I., Daves, W., Tkadletz, M., Teppernegg, T., Klünsner, T., Schalk, N., Mitterer, C., Tritremmel, C., Ecker, W. & Czettl, C., 2016, In: Surface & coatings technology. 304, p. 134-141 8 p.Research output: Contribution to journal › Article › Research › peer-review
- E-pub ahead of print
Electrochemical deposition of hydroxyapatite on beta-Ti-40Nb
Schmidt, R., Hoffmann, V., Helth, A., Gostin, P. F., Calin, M., Eckert, J. & Gebert, A., 26 Mar 2016, (E-pub ahead of print) In: Surface & coatings technology. 294.2016, 25 May, p. 186-193 8 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Correlative microstructure and topography informed nanoindentation of copper films
Bigl, S., Schöberl, T., Wurster, S., Cordill, M. & Kiener, D., 25 Dec 2016, In: Surface & coatings technology. 308.2016, 25 December, p. 404-413 10 p.Research output: Contribution to journal › Article › Research › peer-review
- 2017
- Published
Non-reactively sputtered ultra-high temperature Hf-C and Ta-C coatings
Lasfargues, H., Glechner, T., Koller, C., Paneta, V., Primetzhofer, D., Kolozsvari, S., Holec, D., Riedl, H. & Mayrhofer, P. H., 2017, In: Surface & coatings technology. 309.2017, 15 January, p. 436-444 9 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Phase composition and thermal stability of arc evaporated Ti1 − xAlxN hard coatings with 0.4 ≤ x ≤ 0.67
Großmann, B., Schalk, N., Czettl, C., Pohler, M. & Mitterer, C., 2017, In: Surface & coatings technology. 309.2017, 15 January, p. 687-693 7 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Vacancy-driven extended stability of cubic metastable Ta-Al-N and Nb-Al-N phases
Pacher, F., Mayrhofer, P. H. & Holec, D., 2017, In: Surface & coatings technology. 326.2017, 15 October, Part A, p. 37-44 8 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Wear and fatigue resistance of mild steel components reinforced by arc welded hard layers
Leitner, M., Pichler, P., Steinwender, F. & Guster, C., 2017, In: Surface & coatings technology. 330.2017, 1 December, p. 140-148 9 p.Research output: Contribution to journal › Article › Research › peer-review
- E-pub ahead of print
Thermal stability and oxidation resistance of sputtered Ti-Al-Cr-N hard coatings
Xu, Y. X., Riedl, H., Holec, D., Chen, L., Du, Y. & Mayrhofer, P. H., 20 May 2017, (E-pub ahead of print) In: Surface & coatings technology. 324.2017, 15 September, p. 48-56 9 p.Research output: Contribution to journal › Article › Research › peer-review
- E-pub ahead of print
Annealing effects on the film stress and adhesion of tungsten-titanium barrier layers
Kleinbichler, A., Todt, J., Zechner, J., Wöhlert, S., Többens, D. & Cordill, M., 18 Sept 2017, (E-pub ahead of print) In: Surface & coatings technology. 332.2017, 25 December, p. 376-381 6 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Combined TEM and XPS studies of metal - polymer interfaces for space applications
Putz, B., Milassin, G., Butenko, Y., Völker, B., Gammer, C., Semprimoschnig, C. & Cordill, M., 18 Sept 2017, In: Surface & coatings technology. 332.2017, 25 December, p. 368-375 6 p.Research output: Contribution to journal › Article › Research › peer-review
- E-pub ahead of print
Non-reactive dc magnetron sputter deposition of Mo-O thin films from ceramic MoOx targets
Pachlhofer, J., Martin-Luengo, A. T., Franz, R., Franzke, E., Köstenbauer, H., Winkler, J., Bonanni, A., Mitterer, S. & Mitterer, C., 18 Sept 2017, (E-pub ahead of print) In: Surface & coatings technology. 332.2017, 25 December, p. 80-85 6 p.Research output: Contribution to journal › Article › Research › peer-review
- E-pub ahead of print
Interface-induced electronic structure toughening of nitride superlatices
Rehák, P., Cerny, M. & Holec, D., 25 Sept 2017, (E-pub ahead of print) In: Surface & coatings technology. 325.2017, September, p. 410-416 7 p.Research output: Contribution to journal › Article › Research › peer-review