Rostislav Daniel

Research output

  1. 2025
  2. Published

    A high-throughput framework for pile-up correction in high-speed nanoindentation maps

    Rossi, E., Duranti, D., Rashid, S., Zitek, M., Daniel, R. & Sebastiani, M., 11 Feb 2025, In: Materials and Design. 251.2025, March, 18 p., 113708.

    Research output: Contribution to journalArticleResearchpeer-review

  3. Published

    Accurate prediction of structural and mechanical properties on amorphous materials enabled through machine-learning potentials: A case study of silicon nitride

    Nayak, G. K., Srinivasan, P., Todt, J., Daniel, R., Nicolini, P. & Holec, D., 6 Jan 2025, In: Computational materials science. 249.2025, 5 February, 11 p., 113629.

    Research output: Contribution to journalArticleResearchpeer-review

  4. 2024
  5. Published

    Functional thin films for advanced microelectronics at the chair for functional materials and material systems

    Daniel, R., 2024.

    Research output: Contribution to conferencePosterResearchpeer-review

  6. 2023
  7. Published

    Revealing dynamic-mechanical properties of precipitates in a nanostructured thin film using micromechanical spectroscopy

    Alfreider, M., Meindlhumer, M., Ziegelwanger, T., Daniel, R., Keckes, J. & Kiener, D., 25 Jun 2023, In: MRS Bulletin. 49.2024, 1, p. 49-58 10 p.

    Research output: Contribution to journalArticleResearchpeer-review

  8. Published

    Realistic structural properties of amorphous SiNx from machine-learning-assisted molecular dynamics

    Nayak, G. K., Prashanth, S., Todt, J., Daniel, R. & Holec, D., 2023.

    Research output: Contribution to conferencePosterResearch

  9. 2022
  10. Published

    Precipitation-based grain boundary design alters Inter- to Trans-granular Fracture in AlCrN Thin Films

    Meindlhumer, M., Ziegelwanger, T., Zalesak, J., Hans, M., Löfler, L., Spor, S., Jäger, N., Stark, A., Hruby, H., Daniel, R., Holec, D., Schneider, J. M., Mitterer, C. & Keckes, J., 15 Sept 2022, In: Acta materialia. 237.2022, 15 September, 18 p., 118156.

    Research output: Contribution to journalArticleResearchpeer-review

  11. Published

    Impact of Si on the high-temperature oxidation of AlCr(Si)N coatings

    Jäger, N., Meindlhumer, M., Zitek, M., Spor, S., Hruby, H., Nahif, F., Julin, J., Rosenthal, M., Keckes, J., Mitterer, C. & Daniel, R., 20 Feb 2022, In: JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY. 100.2022, 20 February, p. 91-100 10 p.

    Research output: Contribution to journalArticleResearchpeer-review

  12. Published

    Biocompatibility and antibacterial properties of TiCu(Ag) thin films produced by physical vapor deposition magnetron sputtering

    Rashid, S., Vita, G. M., Persichetti, L., Iucci, G., Battocchio, C., Daniel, R., Visaggio, D., Marsotto, M., Visca, P., Bemporad, E., Ascenzi, P., Capellini, G., Sebastiani, M. & di Masi, A., 30 Jan 2022, In: Applied surface science. 573.2022, 30 January, 12 p., 151604.

    Research output: Contribution to journalArticleResearchpeer-review

  13. Published

    Microstructure-dependent phase stability and precipitation kinetics in equiatomic CrMnFeCoNi high-entropy alloy: Role of grain boundaries

    Daniel, R., Zalesak, J., Matko, I., Baumegger, W., Hohenwarter, A., George, E. P. & Keckes, J., 15 Jan 2022, In: Acta materialia. 223.2022, 15 January, 8 p., 117470.

    Research output: Contribution to journalArticleResearchpeer-review

  14. 2021
  15. Published

    Influence of the Silver Content on Mechanical Properties of Ti-Cu-Ag Thin Films

    Rashid, S., Sebastiani, M., Mughal, M. Z., Daniel, R. & Bemporad, E., 9 Feb 2021, In: Nanomaterials. 11.2021, 2, 14 p., 435.

    Research output: Contribution to journalArticleResearchpeer-review

  16. Published

    Ion irradiation-induced localized stress relaxation in W thin film revealed by cross-sectional X-ray nanodiffraction

    Hlushko, K., Mackova, A., Zalesak, J., Burghammer, M., Davydok, A., Krywka, C., Daniel, R., Keckes, J. & Todt, J., 7 Feb 2021, In: Thin solid films. 722.2021, 31 March, 6 p., 138571.

    Research output: Contribution to journalArticleResearchpeer-review

  17. Published

    Evolution of structure, residual stress, thermal stability and wear resistance of nanocrystalline multilayered Al0.7Cr0.3N-Al0.67Ti0.33N coatings

    Spor, S., Jäger, N., Meindlhumer, M., Hruby, H., Burghammer, M., Nahif, F., Mitterer, C., Keckes, J. & Daniel, R., 2021, In: Surface & coatings technology. 425.2021, 15 November, 9 p., 127712.

    Research output: Contribution to journalArticleResearchpeer-review

  18. 2020
  19. E-pub ahead of print

    Evolution of stress fields during crack growth and arrest in a brittle-ductile CrN-Cr clamped-cantilever analysed by X-ray nanodiffraction and modelling

    Meindlhumer, M., Brandt, L. R., Zalesak, J., Rosenthal, M., Hruby, H., Kopecek, J., Salvati, E., Mitterer, C., Daniel, R., Todt, J., Keckes, J. & Korsunsky, A. M., 28 Nov 2020, (E-pub ahead of print) In: Materials and Design. 2021, 198, 16 p., 109365.

    Research output: Contribution to journalArticleResearchpeer-review

  20. Published

    Multi-scale interface design of strong and damage resistant hierarchical nanostructured materials

    Daniel, R., Meindlhumer, M., Zalesak, J., Baumegger, W., Todt, J., Ziegelwanger, T., Keckes, J., Mitterer, C. & Keckes, J., Nov 2020, In: Materials and Design. 196, November, p. 1-11 109169.

    Research output: Contribution to journalArticleResearchpeer-review

  21. Published

    Nanoscale stress distributions and microstructural changes at scratch track cross-sections of a deformed brittle-ductile CrN-Cr bilayer

    Meindlhumer, M., Zalesak, J., Ecker, W., Rosenthal, M., Niese, S., Gawlitza, P., Hruby, H., Mitterer, C., Daniel, R., Keckes, J. & Todt, J., 5 Aug 2020, In: Materials & design. 195.2020, October, 16 p., 109023.

    Research output: Contribution to journalArticleResearchpeer-review

  22. Published

    Extraordinary high-temperature behavior of electrically conductive Hf7B23Si22C6N40 ceramic film

    Zeman, P., Zuzjaková, Čerstvý, R., Houška, J., Shen, Y., Todt, J., Jiang, J., Daniel, R., Keckes, J., Meletis, E. I. & Vlček, J., 15 Jun 2020, In: Surface and Coatings Technology. 391.2020, 15 June, 8 p., 125686.

    Research output: Contribution to journalArticleResearchpeer-review

  23. Published

    Nanoscale residual stress and microstructure gradients across the cutting edge area of a TiN coating on WC –Co

    Meindlhumer, M., Jäger, N., Spor, S., Rosenthal, M., Keckes, J., Hruby, H., Mitterer, C., Daniel, R., Keckes, J. & Todt, J., 29 Feb 2020, In: Scripta materialia. 182.2020, June, p. 11-15 5 p.

    Research output: Contribution to journalArticleResearchpeer-review

  24. Published

    Microstructural evolution and thermal stability of AlCr(Si)N hard coatings revealed by in-situ high-temperature high-energy grazing incidence transmission X-ray diffraction

    Jäger, N., Meindlhumer, M., Spor, S., Hruby, H., Julin, J., Stark, A., Nahif, F., Keckes, J., Mitterer, C. & Daniel, R., 18 Jan 2020, In: Acta materialia. 186.2020, March, p. 545-554 10 p.

    Research output: Contribution to journalArticleResearchpeer-review

  25. 2019
  26. Published
  27. Published

    Structure-stress relationships in nanocrystalline multilayered Al0.7Cr0.3N/Al0.9Cr0.1N coatings studied by cross-sectional X-ray nanodiffraction

    Klima, S., Jäger, N., Hruby, H., Mitterer, C., Keckes, J., Burghammer, M. & Daniel, R., 15 May 2019, In: Materials and Design. 170, p. 1-9 107702.

    Research output: Contribution to journalArticleResearchpeer-review

  28. Published

    Biomimetic hard and tough nanoceramic Ti–Al–N film with self-assembled six-level hierarchy

    Meindlhumer, M., Zalesak, J., Pitonak, R., Todt, J., Sartory, B., Burghammer, M., Stark, A., Schell, N., Daniel, R., Keckes, J., Lessiak, M., Köpf, A., Weißenbacher, R. & Keckes, J., 28 Apr 2019, In: Nanoscale. 11.2019, 16, p. 7986-7995 10 p.

    Research output: Contribution to journalArticleResearchpeer-review

  29. Published

    Antibacterial Silicon Oxide Thin Films Doped with Zinc and Copper Grown by Atmospheric Pressure Plasma Chemical Vapor Deposition

    Jäger, E., Schmidt, J., Pfuch, A., Spange, S., Beier, O., Jäger, N., Jantschner, O., Daniel, R. & Mitterer, C., Feb 2019, In: Nanomaterials. 9.2019, 2, p. 1-14 14 p., 255.

    Research output: Contribution to journalArticleResearchpeer-review

  30. Published

    Anisotropy of fracture toughness in nanostructured ceramics controlled by grain boundary design

    Daniel, R., Meindlhumer, M., Baumegger, W., Todt, J., Zalesak, J., Ziegelwanger, T., Mitterer, C. & Keckes, J., 2019, In: Materials and Design. 161.2019, January, p. 80-85 6 p.

    Research output: Contribution to journalArticleResearchpeer-review

  31. Published

    Evolution of structure and residual stress of a fcc/hex-AlCrN multi-layered system upon thermal loading revealed by cross-sectional X-ray nano-diffraction

    Jäger, N., Klima, S., Hruby, H., Julin, J., Burghammer, M., Keckes, J., Mitterer, C. & Daniel, R., 2019, In: Acta materialia. 162.2019, 1, p. 55-66 12 p.

    Research output: Contribution to journalArticleResearchpeer-review

  32. 2018
  33. Published

    30 nm X-ray focusing correlates oscillatory stress, texture and structural defect gradients across multilayered Ti N-SiOx thin film

    Keckes, J., Daniel, R., Todt, J., Zalesak, J., Sartory, B., Braun, S., Gluch, J., Rosenthal, M., Burghammer, M. C., Mitterer, C., Niese, S. & Kubec, A., 2018, In: Acta materialia. 144, p. 862-873

    Research output: Contribution to journalArticleResearchpeer-review

  34. Published
  35. Published

    Nanoscale residual stress depth profiling by focused ion beam milling and eigenstrain analysis

    Korsunsky, A. M., Salvati, E., Lunt, A. G. J., Sui, T., Mughal, Z. M., Daniel, R., Keckes, J., Bemporad, E. & Sebastiani, M., 2018, In: Materials and Design. 145, p. 55-64

    Research output: Contribution to journalArticleResearchpeer-review

  36. Published
  37. 2017
  38. Published
  39. E-pub ahead of print

    Peculiarity of self-assembled cubic nanolamellae in the TiN/AlN system: Epitaxial self-stabilization by element deficiency/excess

    Zalesak, J., Holec, D., Matko, I., Petrenec, M., Sartory, B., Koutna, N., Daniel, R., Pitonak, R. & Keckes, J., 5 Apr 2017, (E-pub ahead of print) In: Acta materialia. 131.2017, 1 June, p. 391-399 9 p.

    Research output: Contribution to journalArticleResearchpeer-review

  40. E-pub ahead of print

    Cold pilgering of duplex steel tubes: The response of austenite and ferrite to excessive cold deformation up to high strains

    Ragger, K., Primig, S., Daniel, R., Kaiser, R., Paal, J., Mitterer, C. & Buchmayr, B., 16 Mar 2017, (E-pub ahead of print) In: Materials characterization. 128.2017, June, p. 257–268 12 p.

    Research output: Contribution to journalArticleResearchpeer-review

  41. Published

    Selective interface toughness measurements of layered thin films

    Konetschnik, R., Daniel, R., Brunner, R. & Kiener, D., 9 Mar 2017, In: AIP Advances. 7.2017, 3, 5 p., 035307.

    Research output: Contribution to journalArticleResearchpeer-review

  42. Published
  43. Published
  44. 2016
  45. Published

    Hierarchical Architectures to Enhance Structural and Functional Properties of Brittle Materials

    Bermejo, R., Daniel, R., Schuecker, C., Paris, O., Danzer, R. & Mitterer, C., 26 Dec 2016, In: Advanced engineering materials. 19, 4, 15 p., 1600683.

    Research output: Contribution to journalArticleResearchpeer-review

  46. E-pub ahead of print

    Grain boundary design of thin films: Using tilted brittle interfaces for multiple crack deflection toughening

    Daniel, R., Meindlhumer, M., Baumegger, W., Zalesak, J., Sartory, B., Burghammer, M. C., Mitterer, C. & Keckes, J., 2 Oct 2016, (E-pub ahead of print) In: Acta materialia. 122.2017, 1 January, p. 130-137 8 p.

    Research output: Contribution to journalArticleResearchpeer-review

  47. E-pub ahead of print

    Fracture toughness enhancement of brittle nanostructured materials by spatial heterogeneity: A micromechanical proof for CrN/Cr and TiN/SiOx multilayers

    Daniel, R., Meindlhumer, M., Zalesak, J., Sartory, B., Zeilinger, A., Mitterer, C. & Keckes, J., 13 May 2016, (E-pub ahead of print) In: Materials & design. 104.2016, 15 August, p. 227-234 8 p.

    Research output: Contribution to journalArticleResearchpeer-review

  48. Published
  49. Published

    In-situ Observation of Cross- Sectional Microstructural Changes and Stress Distributions in Fracturing TiN Thin Film during Nanoindentation

    Zeilinger, A., Todt, J., Krywka, C., Müller, M., Ecker, W., Sartory, B., Meindlhumer, M., Stefenelli, M., Daniel, R., Mitterer, C. & Keckes, J., 7 Mar 2016, In: Scientific reports (London : Nature Publishing Group). 6:22670, p. 1-14 14 p.

    Research output: Contribution to journalArticleResearchpeer-review

  50. Published

    Advanced characterization methods for wear resistant hard coatings: A review on recent progress

    Tkadletz, M., Schalk, N., Daniel, R., Keckes, J., Czettl, C. & Mitterer, C., 2016, In: Surface & coatings technology. 285, p. 31-46 16 p.

    Research output: Contribution to journalArticleResearchpeer-review

  51. Published

    Al-rich cubic Al0.8Ti0.2N coating with self-organized nano-lamellar microstructure: Thermal and mechanical properties

    Todt, J., Zalesak, J., Daniel, R., Pitonak, R., Köpf, A., Weißenbacher, R., Sartory, B., Mitterer, C. & Keckes, J., 2016, In: Surface & coatings technology. 291, p. 89-93 5 p.

    Research output: Contribution to journalArticleResearchpeer-review

  52. Published

    Combinatorial refinement of thin-film microstructure, properties and process conditions: Iterative nanoscale search for self-assembled TiAlN nanolamellae

    Zalesak, J., Todt, J., Pitonak, R., Köpf, A., Weißenbacher, R., Sartory, B., Burghammer, M., Daniel, R. & Keckes, J., 2016, In: Journal of applied crystallography. 49, 6, p. 2217-2225 9 p.

    Research output: Contribution to journalArticleResearchpeer-review

  53. Published

    Cross-sectional stress distribution in AlxGa1-xN heterostructure on Si(111) substrate characterized by ion beam layer removal method and precession electron diffraction

    Reisinger, M., Zalesak, J., Daniel, R., Tomberger, M., Weiss, J. K., Darbal, A. D., Petrenec, M., Zechner, J., Daumiller, I., Ecker, W., Sartory, B. & Keckes, J., 2016, In: Materials and Design. 106, p. 476-481 6 p.

    Research output: Contribution to journalArticleResearchpeer-review

  54. Published

    Cross-sectional structure-property relationship in a graded nanocrystalline Ti1-xAlxN thin film

    Zalesak, J., Bartosik, M., Daniel, R., Mitterer, C., Krywka, C., Kiener, D., Mayrhofer, P. H. & Keckes, J., 2016, In: Acta materialia. 102, p. 212-219 8 p.

    Research output: Contribution to journalArticleResearchpeer-review

  55. Published
  56. Published

    Influence of varying nitrogen partial pressures on microstructure, mechanical and optical properties of sputtered TiAlON coatings

    Schalk, N., Simonet Fotso, J., Holec, D., Jakopic, G., Fian, A., Terziyska, V., Daniel, R. & Mitterer, C., 2016, In: Acta materialia. 119, p. 26-34 9 p.

    Research output: Contribution to journalArticleResearchpeer-review

  57. Published
  58. Published
  59. Published
  60. Published

    X-ray nanodiffraction analysis of stress oscillations in a W thin film on through-silicon via

    Todt, J., Hammer, H., Sartory, B., Burghammer, M., Kraft, J., Daniel, R., Keckes, J. & Defregger, S., 2016, In: Journal of applied crystallography. 49, p. 182-187 6 p.

    Research output: Contribution to journalArticleResearchpeer-review

  61. 2015
  62. Published
  63. Published

    Mechanical property enhancement in laminates through control of morphology and crystal orientation

    Zeilinger, A., Daniel, R., Stefenelli, M., Sartory, B., Chitu, L., Burghammer, M., Schöberl, T., Kolednik, O., Keckes, J. & Mitterer, C., 2015, In: Journal of physics / D, Applied physics. 48, p. 2953031-2953039

    Research output: Contribution to journalArticleResearchpeer-review

  64. Published

    Microstructural design: a successful strategy for fracture toughness enhancement of hard coatings

    Daniel, R., Zalesak, J., Mitterer, C., Sartory, B., Meindlhumer, M. & Keckes, J., 2015.

    Research output: Contribution to conferencePresentationResearchpeer-review

  65. Published

    Microstructure-controlled depth gradients of mechanical properties in thin nanocrystalline films: Towards structure-property gradient functionalization

    Daniel, R., Zeilinger, A., Schöberl, T., Sartory, B., Mitterer, C. & Keckes, J., 2015, In: Journal of applied physics. 117, 23, p. 235301-1-235301-12

    Research output: Contribution to journalArticleResearchpeer-review

  66. Published

    Microstructure, mechanical and optical properties of TiAlON coatings sputter deposited with varying oxygen partial pressures

    Schalk, N., Simonet Fotso, J., Holec, D., Fian, A., Jakopic, G., Terziyska, V., Daniel, R. & Mitterer, C., 2015.

    Research output: Contribution to conferencePresentationResearchpeer-review

  67. Published
  68. Published

    Nitrogen atom shift and the structural change in chromium nitride

    Wan, P., Zhang, Z., Holec, D., Daniel, R., Mitterer, C. & Duan, H., 2015, In: Acta materialia. 98, p. 119-127

    Research output: Contribution to journalArticleResearchpeer-review

  69. Published

    Recent progress in advanced characterization methods for the development of hard coatings: From improved composition/microstructure/property relations to insights in degradation behavior

    Mitterer, C., Mühlbacher, M., Zeilinger, A., Stefenelli, M., Daniel, R., Tkadletz, M., Schalk, N., Sartory, B. & Keckes, J., 2015.

    Research output: Contribution to conferencePresentationResearchpeer-review

  70. Published

    Resolving depth evolution of microstructure and hardness in sputtered CrN film

    Zeilinger, A., Daniel, R., Schöberl, T., Stefenelli, M., Sartory, B., Keckes, J. & Mitterer, C., 2015, In: Thin solid films. 581.2015, April, p. 75-79

    Research output: Contribution to journalArticleResearchpeer-review

  71. Published

    Software Package to evaluate two-dimensional X-ray nanodiffraction data from thin films

    Keckes, J., Stefenelli, M., Todt, J., Mitterer, C., Daniel, R. & Keckes, J., 2015.

    Research output: Contribution to conferencePosterResearchpeer-review

  72. Published

    The peculiarity of the metalceramic interface

    Zhang, Z., Long, Y., Cazottes, S., Daniel, R., Mitterer, C. & Dehm, G., 2015, In: Scientific reports (London : Nature Publishing Group). p. 1-12

    Research output: Contribution to journalArticleResearchpeer-review

  73. Published

    X-ray nanodiffraction reveals stress distribution across an indented multilayered CrN-Cr thin film

    Steffenelli, M., Daniel, R., Ecker, W., Kiener, D., Todt, J., Zeilinger, A., Mitterer, C., Burghammer, M. & Keckes, J., 2015, In: Acta materialia. 85, p. 24-31

    Research output: Contribution to journalArticleResearchpeer-review

  74. 2014
  75. E-pub ahead of print

    Complementary ab initio and X-ray nanodiffraction studies of Ta2 O5

    Hollerweger, R., Holec, D., Paulitsch, J., Bartosik, M., Daniel, R., Rachbauer, R., Polcik, P., Keckes, J., Krywka, C., Euchner, H. & Mayerhofer, P. H., 30 Oct 2014, (E-pub ahead of print) In: Acta materialia. 83.2015, 15 January, p. 276-284 9 p.

    Research output: Contribution to journalArticleResearchpeer-review

  76. Published

    Mono-textured nanocrystalline thin films with pronounced stress-gradients: On the role of grain boundaries in the stress evolution

    Daniel, R., Jäger, E., Todt, J., Sartory, B., Mitterer, C. & Keckes, J., 28 May 2014, In: Journal of applied physics. 115, 20, 203507.

    Research output: Contribution to journalArticleResearchpeer-review

  77. Published

    Macroscopic fracture behaviour of CrN hard coatings evaluated by X-ray diffraction coupled with four-point bending

    Stefenelli, M., Riedl, A., Todt, J., Bartosik, M., Daniel, R., Mitterer, C. & Keckes, J., 1 Jan 2014, Materials Science Forum. Vol. 768-769. p. 272-279 8 p. (Materials Science Forum; vol. 768-769).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  78. Published

    A combinatorial X-ray sub-micron diffraction study of microstructure, residual stress and phase stability in TiAlN coatings

    Riedl, A., Daniel, R., Todt, J., Steffenelli, M., Holec, D., Sartory, B., Krywka, C., Müller, M., Mitterer, C. & Keckes, J., 2014, In: Surface & coatings technology. 257, p. 108-113

    Research output: Contribution to journalArticleResearchpeer-review

  79. Published

    Controlled functionality of thin films through advanced microstructural design

    Daniel, R., Mitterer, C. & Keckes, J., 2014.

    Research output: Contribution to conferencePresentationResearchpeer-review

  80. Published
  81. Published

    Funktionale Schichten für das Automobil

    Mitterer, C., Saringer, C., Franz, R., Jantschner, O., Terziyska, V. & Daniel, R., 2014.

    Research output: Contribution to conferencePosterResearchpeer-review

  82. Published

    Mechanical and tribological properties of Al - Ti - N/Al - Cr - B -N multilayer films synthesized by cathodic arc evaporation

    Tritremmel, C., Daniel, R., Rudigier, H., Pocik, P. & Mitterer, C., 2014, In: Surface & coatings technology. 246, p. 57-63

    Research output: Contribution to journalArticleResearchpeer-review

  83. Published
  84. Published

    Microstructure-related depth-gradients of mechanical properties in thin nanocrystalline films

    Daniel, R., Zalesak, J., Mitterer, C., Riedl, A., Sartory, B., Keckes, J. & Schöberl, T., 2014.

    Research output: Contribution to conferencePresentationResearchpeer-review

  85. Published

    Novel nanocomposite coatings: Advances and industrial applications

    Daniel, R. & Musil, J., 2014

    Research output: Book/ReportBookResearch

  86. Published
  87. Published

    Superior oxidation resistance, mechanical properties and residual stresses of an Al-rich nanolamellar Ti0.05Al0.95N coating prepared by CVD

    Todt, J., Pitonak, R., Köpf, A., Weißenbacher, R., Sartory, B., Burghammer, M., Daniel, R., Schöberl, T. & Keckes, J., 2014, In: Surface & coatings technology. 258.2014, November, p. 1119-1127

    Research output: Contribution to journalArticleResearchpeer-review

  88. 2013
  89. Published

    Bias- and temperature-dependent strain evolution across nanocrystalline TiAlN films studied by X-ray nanodiffraction

    Riedl, A., Todt, J., Daniel, R., Steffenelli, M., Holec, D., Krywka, C., Mitterer, C. & Keckes, J., 2013.

    Research output: Contribution to conferencePosterResearchpeer-review

  90. Published

    Cross-sectional X-ray nanobeam diffraction analysis of a compositionally graded CrNx thin film

    Bartosik, M., Daniel, R., Mitterer, C., Matko, I., Burghammer, M., Mayrhofer, P. H. & Keckes, J., 2013, In: Thin solid films. 542, p. 1-4

    Research output: Contribution to journalArticleResearchpeer-review

  91. Published

    Influence of Al and Si content on structure and mechanical properties of arc evaporated Al-Cr-Si-N thin films

    Tritremmel, C., Daniel, R., Lechthaler, M., Pocik, P. & Mitterer, C., 2013, In: Thin solid films. 534, p. 403-409

    Research output: Contribution to journalArticleResearchpeer-review

  92. Published

    Insights into the atomic and electronic structure triggered by ordered nitrogen vacancies in CrN

    Zhang, Z., Li, H., Daniel, R., Mitterer, C. & Dehm, G., 2013, In: Physical review : B, Condensed matter and materials physics. 87, p. 0141041-0141049

    Research output: Contribution to journalArticleResearchpeer-review

  93. Published

    Novel TiAlN nanostructured CVD coatings with superior oxidation resistance

    Keckes, J., Todt, J., Daniel, R., Mitterer, C., Köpf, A., Weißenbacher, R. & Pitonak, R., 2013.

    Research output: Contribution to conferencePosterResearchpeer-review

  94. Published

    Origins of microstructure and stress gradients in nanocrystalline thin films: The role of growth parameters and self-organization

    Daniel, R., Keckes, J., Matko, I., Burghammer, M. & Mitterer, C., 2013, In: Acta materialia. 61, p. 6255-6266

    Research output: Contribution to journalArticleResearchpeer-review

  95. Published

    Self-organized periodic soft-hard nanolamellae in polycrystalline TiAlN thin films

    Keckes, J., Daniel, R., Mitterer, C., Matko, I., Sartory, B., Köpf, A., Weißenbacher, R. & Pitonak, R., 2013, In: Thin solid films. 545, p. 29-32

    Research output: Contribution to journalArticleResearchpeer-review

  96. Published

    Transmission electron microscopy characterization of CrN films on MgO(001)

    Harzer, T. P., Daniel, R., Mitterer, C., Dehm, G. & Zhang, Z. L., 2013, In: Thin solid films. 545, p. 154-160 7 p.

    Research output: Contribution to journalArticleResearchpeer-review

  97. Published

    Using pulsed and modulated photothermal radiometry to measure the thermal conductivity of thin films

    Kusiak, A., Martan, J., Battaglia, J.-L. & Daniel, R., 2013, In: Thermochimica Acta. 556, p. 1-5

    Research output: Contribution to journalArticleResearchpeer-review

  98. Published

    X-ray analysis of residual stress gradients in TiN coatings by a Laplace space approach and cross-sectional nanodiffraction: a critical comparison

    Steffenelli, M., Todt, J., Riedl, A., Ecker, W., Müller, T., Daniel, R., Burghammer, M. & Keckes, J., 2013, In: Journal of applied crystallography. 46, p. 1-8

    Research output: Contribution to journalArticleResearchpeer-review

  99. 2012
  100. Published

    A novel approach for determining fracture toughness of hard coatings on the micrometer scale

    Riedl, A., Daniel, R., Steffenelli, M., Schöberl, T., Kolednik, O., Mitterer, C. & Keckes, J., 2012, In: Scripta materialia. 67, p. 708-711

    Research output: Contribution to journalArticleResearchpeer-review

  101. Published

    Design and architecture of functional materials systems

    Daniel, R., 2012.

    Research output: Contribution to conferencePosterResearchpeer-review

  102. Published

    Lateral gradients of phases, residual stress and hardness in a laser heated Ti0.52Al0.48N coating on hard metal

    Bartosik, M., Daniel, R., Zhang, Z., Deluca, M., Ecker, W., Steffenelli, M., Klaus, M., Genzel, C., Stefenelli, M., Mitterer, C. & Keckes, J., 2012, In: Surface & coatings technology. 206, p. 4502-4510 9 p.

    Research output: Contribution to journalArticleResearchpeer-review

  103. Published

    Mesure de la conductivite thermique des couches de CrN par deux techniques de radiometrie photothermique

    Battaglia, J.-L., Martan, J., Kusiak, A. & Daniel, R., 2012.

    Research output: Contribution to conferencePosterResearchpeer-review

  104. Published

    Mesure de la conductivite thermique d'une couche de CrN par deux techniques de radiometrie photothermique

    Battaglia, J.-L., Martan, J., Kusiak, A. & Daniel, R., 2012, Congres francais de thermique. p. 108-114

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  105. Published

    Microstructure and mechanical properties of nanocrystalline Al-Cr-B-N thin films

    Tritremmel, C., Daniel, R., Lechthaler, M., Rudigier, H., Polcik, P. & Mitterer, C., 2012, In: Surface & coatings technology. 213, p. 1-7

    Research output: Contribution to journalArticleResearchpeer-review

  106. Published

    Microstructure modifications of CrN coatings by pulsed bias sputtering

    Grasser, S., Daniel, R. & Mitterer, C., 2012, In: Surface & coatings technology. 206, p. 4666-4671

    Research output: Contribution to journalArticleResearchpeer-review

  107. Published

    Oxidation behavior of arc evaporated Al-Cr-Si-N thin films

    Tritremmel, C., Daniel, R., Mitterer, C., Mayrhofer, P. H., Lechthaler, M. & Polcik, P., 2012, In: Journal of vacuum science & technology / A (JVST). 30, p. 061501-1-061501-6

    Research output: Contribution to journalArticleResearchpeer-review

  108. Published

    Structure related stress gradients in thin nanocrystalline films revealed by X-ray nanodiffraction

    Daniel, R., Keckes, J. & Mitterer, C., 2012.

    Research output: Contribution to conferencePosterResearchpeer-review

  109. Published

    TEM characterization of CrN thin films epitaxially grown on MgO (001)

    Harzer, T. P., Kormout, K., Daniel, R., Mitterer, C., Dehm, G. & Zhang, Z. L., 2012.

    Research output: Contribution to conferencePosterResearchpeer-review

  110. Published

    Thermally treated hard coatings characterized by XRD coupled with four-point bending

    Steffenelli, M., Riedl, A., Bartosik, M., Daniel, R., Mitterer, C. & Keckes, J., 2012.

    Research output: Contribution to conferencePosterResearchpeer-review

  111. Published

    X-ray nanodiffraction reveals strain and microstructure evolution in nanocrystalline thin films

    Keckes, J., Bartosik, M., Daniel, R., Mitterer, C., Maier, G. A., Ecker, W., Vila-Comamala, J., David, C., Schoeder, S. & Burghammer, M., 2012, In: Scripta materialia. 67, p. 748-751

    Research output: Contribution to journalArticleResearchpeer-review

  112. 2011
  113. Published

    Advanced characterisation of the Cu-MgO interface structure by Cs-corrected high-resolution transmission electron microscopy

    Zhang, Z., Daniel, R., Dehm, G. & Mitterer, C., 2011.

    Research output: Contribution to conferencePosterResearchpeer-review

  114. Published

    Atomic and electronic characterization on the CrN/Cr/Si interfaces using CS-corrected HRTEM

    Zhang, Z., Daniel, R. & Mitterer, C., 2011.

    Research output: Contribution to conferencePosterResearchpeer-review

  115. Published

    Atomic and electronic structures of a transition layer at the CrN/Cr interface

    Zhang, Z., Daniel, R. & Mitterer, C., 2011, In: Journal of applied physics. 110, p. 043524-1-043524-4

    Research output: Contribution to journalArticleResearchpeer-review

Previous 1 2 Next