Raul Bermejo

1 - 219 out of 219Page size: 500

Research output

  1. 2025
  2. Published

    Inter- and Transgranular Fracture in Ceramics with Tailored Microstructure

    Jabr, A., Salamon, D. & Bermejo Moratinos, R., 26 Feb 2025.

    Research output: Contribution to conference › Poster › Research › peer-review

  3. Published

    Schadenstoleranz von 3D-gedruckten Keramiken mit eingestelltem Gefüge

    Schlacher, J., Nohut, S., Schwentenwein, M. & Bermejo Moratinos, R., 26 Feb 2025.

    Research output: Contribution to conference › Poster › Transfer › peer-review

  4. Published

    Towards high-strength electrolyte-supported solid oxide fuel cells

    Jana, A., Kraleva, I., Schlacher, J., Supancic, P., Egger, A., Bucher, E. & Bermejo, R., Feb 2025, In: Journal of the European Ceramic Society. 45, 2, 116929.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Understanding the lower fracture resistance of cold sintered ceramics

    Jabr, A., Ribul, E., Salamon, D. & Bermejo, R., Feb 2025, In: Journal of the European Ceramic Society. 45, 2, 116968.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Estimation of residual stresses in single crystal sapphire wafers through eigenmode analysis

    Gruber, M., Kreith, J., Lohrasbi, S., Bermejo, R. & Supancic, P. H., 9 Jan 2025, In: Scripta Materialia. 259.2025, 1 April, 5 p., 116538.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Contact damage response of alumina-based layered architectures under different loading configurations

    Schlacher, J. C., Stücklberger, F., Jabr, A. & Bermejo, R., 2025, In: Journal of the European Ceramic Society. 45.2025, 3, 8 p., 117037.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Improving contact damage resistance of spinel translucent ceramics through a multi-layer design

    Najafzadehkhoee, A., Jabr, A., Talimian, A., Papsik, R., Drdlik, D., Maca, K., Galusek, D. & Bermejo, R., 2025, In: Journal of the European Ceramic Society. 45.2025, 4, 9 p., 117071.

    Research output: Contribution to journal › Article › Research › peer-review

  9. 2024
  10. Published

    Towards high strength SrTiO3-based composites fabricated at room temperature

    Jabr, A., Kuzmić, N., Škapin, S. D., Jantunen, H., Nelo, M., Spreitzer, M. & Bermejo, R., Dec 2024, In: Journal of the European Ceramic Society. 44, 15, 116782.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Thermal shock resistant 3D-printed ceramic components through spatially tailored porosity

    Schlacher, J., Bastos Mateus, L., Nohut, S., Schwentenwein, M. & Bermejo Moratinos, R., 25 Sept 2024, In: Additive Manufacturing. 96, 104582.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Linear volumetric additive manufacturing of zirconia from a transparent photopolymerizable ceramic slurry via Xolography

    Sänger, J. C., König, N. F., De Marzi, A., Zocca, A., Franchin, G., Bermejo, R., Colombo, P. & Günster, J., Sept 2024, In: Open ceramics. 19, 100655.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Prediction of thermal shock induced cracking in multi-material ceramics using a stress-energy criterion

    Papšík, R., Sevecek, O., Schlacher, J. & Bermejo Moratinos, R., May 2024, In: Engineering Fracture Mechanics. 303, 110121.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Towards 3D-printed alumina-based multi-material components with enhanced thermal shock resistance

    Schlacher, J. C., Geier, S., Schwentenwein, M. & Bermejo, R., Apr 2024, In: Journal of the European Ceramic Society. 44.2024, 4, p. 2294-2303 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    The contribution of ceramography to the development of ceramic spark plug electrode materials for large gas engines

    Gruber, M., Melcher, V., Harrer, W. S., Tilz, A., Engelmayer, M., Fimml, W., Wimmer, A. & Bermejo, R., Jan 2024, In: Practical Metallography. 61.2024, 1, p. 4-15 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    3D-printed alumina-based ceramics with spatially resolved porosity

    Nohut, S., Schlacher, J., Kraleva, I., Schwentenwein, M. & Bermejo, R., 2024, In: International journal of applied ceramic technology. 21.2024, 1, p. 89-104 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Ceramic materials as an alternative for conventional spark plug electrodes

    Harrer, W. S., Gruber, M., Melcher, V., Tilz, A., Engelmayer, M., Wimmer, A. & Bermejo, R., 2024, In: International journal of applied ceramic technology. 2024, ??? Stand: 30. September 2024, p. 4393-4403

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Effect of airborne particle abrasion and regeneration firing on the strength of 3D-printed 3Y and 5Y zirconia ceramics

    Mirt, T., Kocjan, A., Hofer, A.-K., Schwentenwein, M., Ivekovic, A., Bermejo, R. & Jevnikar, P., 2024, In: Dental Materials. 40.2024, 1, p. 111-117 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    LITHOZ: Multi-Material 3D Printing

    Schwentenwein, M., Schlacher, J. & Bermejo Moratinos, R., 2024, In: Ceramic applications. 12, 1, p. 40-43

    Research output: Contribution to journal › Article › Transfer

  20. 2023
  21. Published

    Highly textured 3D-printed translucent alumina through pressure-assisted sintering

    Nečina, V., Hofer, A.-K., Bermejo, R. & Pabst, W., 12 Oct 2023, In: Open ceramics. 16.2023, December, 6 p., 100487.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Press-compaction-assisted binder jetting of textured ceramics

    Moghadasi, M., Mahdaviarab, A., Hofer, A. K., Bermejo, R., Pei, Z. & Ma, C., 23 Sept 2023, In: Ceramics International. p. 39214–39222

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Thermal shock behavior of 3D-printed alumina ceramics with spatially tailored porosity

    Bastos Mateus, L., Schlacher, J. C., Nohut, S., Schwentenwein, M. & Bermejo Moratinos, R., 31 Aug 2023.

    Research output: Contribution to conference › Poster › Research

  24. Published

    Prediction of edge and tunnelling crack formation in layered ceramics using a stress-energy fracture criterion

    Papšík, R., Ševeček, O., Hofer, A.-K., Kraleva, I. R., Kreith, J. & Bermejo, R., 1 Jul 2023, In: Journal of the European Ceramic Society. 43, 7, p. 2928-2934 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    CIEC17 – Community Editorial

    Jeffs, S., Bache, M., Chevalier, J., Anselmi-Tamburini, U., Bermejo, R. & Jiménez-Piqué, E., Jul 2023, In: Journal of the European Ceramic Society. 43, 7, p. 2725-2727 3 p.

    Research output: Contribution to journal › Editorial › peer-review

  26. Published

    High-temperature fracture behaviour of layered alumina ceramics with textured microstructure

    Schlacher, J. C., Chlup, Z., Hofer, A.-K. & Bermejo, R., Jul 2023, In: Journal of the European Ceramic Society. 43.2023, 7, p. 2917-2927 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Cold Sintering of Ceramics: Effect of liquid phase chemistry on densification and strength

    Jabr, A., Randall, C. A. & Bermejo Moratinos, R., 5 Jun 2023.

    Research output: Contribution to conference › Poster › Research

  28. Published

    Scaling up the cold sintering process of ceramics

    Jabr, A., Jones, H. N., Argüelles, A. P., Trolier-McKinstry, S., Randall, C. A. & Bermejo Moratinos, R., 30 May 2023, In: Journal of the European Ceramic Society. 43, 12, p. 5319-5329 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Hybridizing Lithography-Based Ceramic Additive Manufacturing with Two-Photon-Polymerization

    Sänger, J. C., Schwentenwein, M., Bermejo, R. & Günster, J., Mar 2023, In: Applied Sciences (Switzerland). 13, 6, 3974.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Effect of second phase addition of zirconia on the mechanical response of textured alumina ceramics

    Hofer, A.-K., Kraleva, I. R., Prötsch, T., Vratanar, A., Wratschko, M. & Bermejo Moratinos, R., 2023, In: Journal of the European Ceramic Society. 43, 7, p. 2935-2942

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Functionally Graded Ceramics by Lithography-Based Ceramic Manufacturing (LCM)

    Nohut, S., Geier, S., Kraleva, I., Schwentenwein, M. & Bermejo Moratinos, R., 2023, In: Journal of additive manufacturing technologies. 2, 1, p. 678

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Low-temperature fabrication of ceramics by the cold sintering process

    Jabr, A., Bermejo Moratinos, R., Guillon, O. & Randall, C. A., 2023, In: Ceramic forum international (CFI). 100, 4, p. E2-E5

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Micro-scale fracture toughness of textured alumina ceramics

    Schlacher, J., Csanádi, T., Vojtko, M., Papšík, R. & Bermejo Moratinos, R., 2023, In: Journal of the European Ceramic Society. 43, 7

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Prediction of ring crack initiation in ceramics and glasses using a stress–energy fracture criterion

    Papšík, R., Sevecek, O., Martin, E. & Bermejo Moratinos, R., 2023, In: Journal of the American Ceramic Society.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Templated grain growth in rapid sintered 3D-printed alumina ceramics

    Hofer, A.-K., Kocjan, A. & Bermejo Moratinos, R., 2023, In: Open ceramics. 15, 100428.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    The effect of liquid phase chemistry on the densification and strength of cold sintered ZnO

    Jabr, A., Fanghanel, J., Zongming, F., Bermejo, R. & Randall, C. A., 2023, In: Journal of the European Ceramic Society. 43.2023, 4, p. 1531-1541 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  37. 2022
  38. Published

    Strategies to enhance structural properties of 3D-printed ceramics

    Hofer, A.-K., Schlacher, J. C., Schwentenwein, M. & Bermejo Moratinos, R., 16 Jun 2022.

    Research output: Contribution to conference › Poster › Research

  39. Published

    Contact damage tolerance of alumina-based layered ceramics with tailored microstructures

    Schlacher, J., Jabr, A., Hofer, A. & Bermejo, R., 4 Apr 2022, In: Journal of the American Ceramic Society. p. 4387-4399

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Effect of binder system on the thermophysical properties of 3D-printed zirconia ceramics

    Hofer, A. K., Rabitsch, J., Jutrzenka-Trzebiatowska, D., Hofstetter, C., Gavalda-Velasco, I., Schlacher, J., Schwentenwein, M. & Bermejo, R., 1 Jan 2022, In: International journal of applied ceramic technology. 19, 1, p. 174-180 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Effect of airborne-particle abrasion of yttria-containing zirconia dental ceramics on mechanical properties before and after regeneration firing

    Mirt, T., Abram, A., van del Velde, N., Jerman, I., Bermejo, R., Kocjan, A. & Jevnikar, P., 2022, In: Journal of the European Ceramic Society. p. 5035-5044

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Effect of crystal orientation on the hardness and strength of piezoelectric LiNbO3 substrates for microelectronic applications

    Gruber, M., Leitner, A., Kiener, D., Supancic, P. & Bermejo, R., 2022, In: Materials and Design. 213, 110306.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    High-strength lithography-based additive manufacturing of ceramic components with rapid sintering

    Hofer, A.-K., Kocjan, A. & Bermejo Moratinos, R., 2022, In: Additive Manufacturing. 103141.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Lithography-based additive manufacturing of porosity graded alumina

    Nohut, S., Geier, S., Kraleva, I. R., Schwentenwein, M. & Bermejo Moratinos, R., 2022, In: Additive Manufacturing Letters. 3, 100060.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Multifunctional performance of Ti2AlC MAX phase/2D braided alumina fiber laminates

    Gonzales-Julian, J., Kraleva, I. R., Belmonte, M., Jung, F., Gries, T. & Bermejo Moratinos, R., 2022, In: Journal of the American Ceramic Society. 105, p. 102-130

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Stereolithographic 3D printing of ceramics: challenges and opportunities for structural integrity

    Lube, T., Staudacher, M., Hofer, A.-K., Schlacher, J. & Bermejo Moratinos, R., 2022, In: Advanced engineering materials. 2200520.

    Research output: Contribution to journal › Article › Research › peer-review

  47. 2021
  48. Published

    Enhancing contact damage tolerance through layered design and textured microstructure

    Jabr, A., Schlacher, J. C. (Co-editor) & Bermejo Moratinos, R. (Co-editor), 23 Nov 2021.

    Research output: Contribution to conference › Poster › Research

  49. Published

    Micro-scale fracture toughness of textured alumina grains and grain boundaries

    Schlacher, J. C., Csanádi, T. (Co-editor), Vojtko, M. (Co-editor), Papšík, R. (Co-editor) & Bermejo Moratinos, R. (Co-editor), 23 Nov 2021.

    Research output: Contribution to conference › Poster › Research

  50. Published

    Modelling of edge and tunnelling cracks initiation in ceramic laminates using the stress-energy criterion

    Papšík, R., Ševeček, O. (Co-editor), Hofer, A.-K. (Co-editor), Kraleva, I. (Co-editor) & Bermejo, R. (Co-editor), 23 Nov 2021.

    Research output: Contribution to conference › Poster › Research

  51. Published

    Effects of acid leaching treatment of soda lime silicate glass on crack initiation and fracture

    Sheth, N., Greenly, C., Bermejo, R., Mauro, J. C., Pantano, C. G. & Kim, S. H., Sept 2021, In: Journal of the American Ceramic Society. 104.2021, 9, p. 4550-4558 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Mechanical failure dependence on the electrical history of lead zirconate titanate thin films

    Coleman, K., Ritter, M., Bermejo, R. & Trolier-McKinstry, S., Apr 2021, In: Journal of the European Ceramic Society. 41, 4, p. 2465-2471 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    Additive manufacturing of highly textured alumina ceramics

    Hofer, A.-K., Kraleva, I. & Bermejo, R., Mar 2021, In: Open ceramics. 5, 100085.

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    Additive manufacturing of high-strength alumina through a multi-material approach

    Schlacher, J., Hofer, A.-K., Geier, S., Kraleva, I. R., Papšík, R., Schwentenwein, M. & Bermejo, R., Mar 2021, In: Open ceramics. 5, 100082.

    Research output: Contribution to journal › Article › Research › peer-review

  55. Published

    Preparation and photocatalytic activity of TiO2 nanotube arrays prepared on transparent spinel substrate

    Petrisková, P., Monfort, O., Satrapinskyy, L., Dobročka, E., Plecenik, T., Plesch, G., Papšík, R., Bermejo, R. & Lenčéš, Z., 20 Jan 2021, In: Ceramics International. 47.2021, 9, p. 12970-12980 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  56. Published

    Fabrication of 3D metal-ceramic (Al-AlN) architectures using laser-powder bed fusion process

    Wallis, C., Buchmayr, B., Bermejo, R. & Supancic, P., 2021, In: Additive Manufacturing. 38.2021, February, 14 p., 101799.

    Research output: Contribution to journal › Article › Research › peer-review

  57. Published

    Subcritical Crack Growth: Modeling of the v–K Curve in Different Environments

    Bermejo, R., 2021, Encyclopedia of Materials: Technical Ceramics and Glasses. Oxford: Elsevier, Vol. 1. p. 811-817

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  58. 2020
  59. Published

    A novel approach to assess the mechanical reliability of thin, ceramic-based multilayer architectures

    Gruber, M., Kraleva, I. R., Supancic, P. H., Danzer, R. & Bermejo, R., Nov 2020, In: Journal of the European Ceramic Society. 40, 14, p. 4727-4736 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  60. Published

    Mechanical properties of zirconia ceramics biomimetically coated with calcium deficient hydroxyapatite

    Macan, J., Dutour Sikiric, M., Deluca, M., Bermejo, R., Baudín, C., Plodinec, M., Salamon, K., Ceh, M. & Gajovic, A., Nov 2020, In: Journal of the Mechanical Behavior of Biomedical Materials. 111, 104006.

    Research output: Contribution to journal › Article › Research › peer-review

  61. Published

    Thickness Dependence of crack initiation and propagation in stacks for piezoelectric microelectromechanical systems

    Coleman, K., Bermejo, R., Leguillon, D. & Trolier-McKinstry, S., Jun 2020, In: Acta Materialia. 191, p. 245-252

    Research output: Contribution to journal › Article › Research › peer-review

  62. E-pub ahead of print

    Strength of additive manufactured alumina

    Schlacher, J., Lube, T., Harrer, W., Mitteramskogler, G., Schwentenwein, M., Danzer, R. & Bermejo, R., 21 Apr 2020, (E-pub ahead of print) In: Journal of the European Ceramic Society. 40.2020, 14, p. 4737-4745 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  63. Published

    Design of damage tolerant and crack-free layered ceramics with textured microstructure

    Hofer, A. K., Walton, R., Ševeček, O., Messing, G. L. & Bermejo, R., 1 Feb 2020, In: Journal of the European Ceramic Society. 40, 2, p. 427-435 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  64. Published

    Microstructure, ionic conductivity and mechanical properties of tape-cast Li1.5Al0.5Ti1.5P3O12 electrolyte sheets

    Dashjav, E., Gellert, M., Yan, G., Grüner, D., Kaiser, N., Spannenberger, S., Kraleva, I., Bermejo, R., Gerhards, M. T., Ma, Q., Malzbender, J., Roling, B., Tietz, F. & Guillon, O., 1 Jan 2020, In: Journal of the European Ceramic Society.

    Research output: Contribution to journal › Article › Research › peer-review

  65. Published

    Influence of acid leaching surface treatment on indentation cracking of soda lime silicate glass

    Sheth, N., Hahn, S. H., Ngo, D., Howzen, A., Bermejo, R., van Duin, A. C. T., Mauro, J. C., Pantano, C. G. & Kim, S. H., 2020, In: Journal of non-crystalline solids. 543, 8 p., 120144.

    Research output: Contribution to journal › Article › Research › peer-review

  66. Published

    Influence of the test configuration and temperature on the mechanical behaviour of WC-Co

    González, L. M., Chicardi, E., Gotor, F. J., Bermejo, R., Llanes, L. & Torres, Y., 2020, In: Metals : open access journal . 10, 3, 322.

    Research output: Contribution to journal › Article › Research › peer-review

  67. Published

    Montanuniversität Leoben: Der Lehrstuhl für Struktur- und Funktionskeramik

    Danzer, R. & Bermejo, R., 2020, In: Ceramic forum international (CFI). 97, 5-6, p. D1-D3

    Research output: Contribution to journal › Letter

  68. 2019
  69. Published

    Enhanced thermal shock response of Al 2 O 3 –graphite composites through a layered architectural design

    Song, J., Yang, H., Bermejo, R., Qu, J., Hu, L. & Zhang, Y., 14 Jun 2019, In: Journal of the American Ceramic Society. 102.2019, 6, p. 3673-3684 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  70. Published

    Mechanical strength of cold-sintered zinc oxide under biaxial bending

    Lowum, S., Floyd, R., Bermejo, R. & Maria, J. P., 30 Mar 2019, In: Journal of materials science. 54, 6, p. 4518-4522 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  71. Published

    Strength limits in mesoscaled 3Y-TZP ceramics for micro-surgical instruments

    Antolino, N., Muhlstein, C., Hayes, G., Adair, J. & Bermejo, R., 1 Mar 2019, In: Journal of the Mechanical Behavior of Biomedical Materials. 91, p. 99-108 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  72. 2018
  73. Published

    Understanding the tensile strength of ceramics in the presence of small critical flaws

    Martin, E., Leguillon, D., Sevecek, O. & Bermejo, R., 1 Oct 2018, In: Engineering Fracture Mechanics. 201, p. 167-175 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  74. Published

    Incipient plasticity and surface damage in LiTaO3 and LiNbO3 single crystals

    Gruber, M., Leitner, A., Kiener, D., Supancic, P. & Bermejo, R., 5 Sept 2018, In: Materials and Design. 153, p. 221-231 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  75. Published

    What is the tensile strength of a ceramic to be used in numerical models for predicting crack initiation?

    Leguillon, D., Martin, E., Sevecek, O. & Bermejo, R., 1 Jul 2018, In: International Journal of Fracture. 212, 1, p. 89-103 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  76. Published

    Improved fracture behavior and mechanical properties of alumina textured ceramics

    Zhang, M., Chang, Y., Bermejo, R., Jiang, G., Sun, Y., Wu, J., Yang, B. & Cao, W., 15 Jun 2018, In: Materials letters. 221, p. 252-255 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  77. Published

    Understanding the effect of surface flaws on the strength distribution of brittle single crystals

    Gruber, M., Leitner, A., Kraleva, I. R., Kiener, D., Supancic, P. H. & Bermejo, R., 28 May 2018, In: Journal of the American Ceramic Society. 101, p. 5705–5716

    Research output: Contribution to journal › Article › Research › peer-review

  78. Published

    Atomistic origins of the differences in anisotropic fracture behaviour of LiTaO3 and LiNbO3 single crystals

    Gruber, M., Konetschnik, R., Popov, M., Spitaler, J., Supancic, P. H., Kiener, D. & Bermejo, R., 15 May 2018, In: Acta Materialia. 150, p. 373-380 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  79. Published

    Auswirkungen von Oberflächenschädigung auf die Festigkeit in spröden Einkristallen für mikroelektronische Anwendungen

    Gruber, M., Leitner, A., Bermejo, R., Supancic, P., Gindel, T., Kraleva, I. & Danzer, R., 2018, Praktische Metallographie Sonderband. Vol. 52. p. 241-246

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  80. Published

    Influence of temperature on the biaxial strength of cemented carbides with different microstructures

    Chicardi, E., Bermejo, R., Gotor, F. J., Llanes, L. & Torres, Y., 2018, In: International journal of refractory metals & hard materials. 71, p. 82-91 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  81. Published

    Mechanical characterization of Ti(C,N)-based cermets fabricated through different colloidal processing routes

    Dios, M., Kraleva, I., González, Z., Alvaredo, P., Ferrari, B., Gordo, E. & Bermejo, R., 2018, In: Journal of alloys and compounds. 732, p. 806-817 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  82. 2017
  83. Published

    Strength distribution and fracture analyses of LiNbO3 and LiTaO3 single crystals under biaxial loading

    Gruber, M., Kraleva, I., Supancic, P., Bielen, J., Kiener, D. & Bermejo, R., Nov 2017, In: Journal of the European Ceramic Society. 37, 14, p. 4397-4406

    Research output: Contribution to journal › Article › Research › peer-review

  84. Published

    “Toward seashells under stress”: Bioinspired concepts to design tough layered ceramic composites

    Bermejo, R., 23 May 2017, In: Journal of the European Ceramic Society. 37, 13, p. 3823-3839 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  85. Published

    Fracture of advanced ceramics and brittle components: Experimental observations

    Bermejo, R., 1 Jan 2017, p. 679-680. 2 p.

    Research output: Contribution to conference › Paper › peer-review

  86. Published

    Modelling of fracture in brittle solids using FEM and finite fracture mechanics

    Ševecek, O., Kotoul, M., Leguillon, D., Martin, E. & Bermejo, R., 1 Jan 2017, p. 928-929. 2 p.

    Research output: Contribution to conference › Paper › peer-review

  87. Published

    Effect of metallization on the strength and fracture behaviour of functional co-fired multilayer ceramics

    Gruber, M., Supancic, P., Aldrian, F. & Bermejo, R., 2017, In: Journal of the European Ceramic Society.

    Research output: Contribution to journal › Article › Research › peer-review

  88. Published

    Influence of the colloidal processing route on the mechanical properties of Ti(C,N)-based cermets

    de Dios, M., Gonzales, Z., Ferrari, B., Kraleva, I., Bermejo, R., Alvaredo, P. & Gordo, E., 2017

    Research output: Non-textual form › Web publication/site › Research

  89. Published

    Influence of the scatter of strength and of measurement uncertainties on the determination of the subcritical crack growth exponent in ceramics and glasses

    Krautgasser, C., Bermejo, R., Supancic, P. & Danzer, R., 2017, In: Journal of the European Ceramic Society. 37, p. 1873-1878 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  90. Published

    Novel colloidal approach for the microstructural improvement in Ti(C,N)/FeNi cermets

    Dios, M., González, Z., Alvaredo, P., Bermejo, R., Gordo, E. & Ferrari, B., 2017, In: Journal of alloys and compounds. 724, 2017, p. 327-338 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  91. Published

    Study of Influence of Residual Stresses on Crack Propagation in Particulate Ceramic Composites

    Majer, Z., Štegnerová, K., Hutar, P., Pletz, M., Bermejo, R. & Náhlík, L., 2017, Solid State Phenomena . Vol. 258. p. 178-181 4 p. (Solid State Phenomena).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  92. Published

    Texture-engineered ceramics - Property enhancements through crystallographic tailoring

    Messing, G. L., Poterala, S., Chang, Y., Frueh, T., Kupp, E. R., Watson, B. H., Walton, R. L., Brova, M. J., Hofer, A.-K., Bermejo, R. & Meyer, R. J., 2017, In: Journal of materials research (JMR). 32, 17, p. 3219-3241 23 p.

    Research output: Contribution to journal › Article › Research › peer-review

  93. 2016
  94. Published

    Hierarchical Architectures to Enhance Structural and Functional Properties of Brittle Materials

    Bermejo, R., Daniel, R., Schuecker, C., Paris, O., Danzer, R. & Mitterer, C., 26 Dec 2016, In: Advanced engineering materials. 19, 4, 15 p., 1600683.

    Research output: Contribution to journal › Article › Research › peer-review

  95. Published

    Assessment of crack-related problems in layered ceramics using the finite fracture mechanics and coupled stress-energy criterion

    Ševeček, O., Kotoul, M., Leguillon, D., Martin, E. & Bermejo, R., 1 Jan 2016, In: Procedia Structural Integrity. 2, p. 2014-2021 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  96. Published

    Effects of subcritical crack growth on the determination of fracture toughness in brittle materials

    Krautgasser, C., Chlup, Z., Supancic, P., Danzer, R. & Bermejo, R., 2016, In: Journal of the European Ceramic Society. 36, p. 1307-1312 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  97. Published

    Evaluation of Mechanical Strength of Miniaturized Functional Substrates and Components in Different Environments

    Bermejo, R., Krautgasser, C., Deluca, M., Pletz, M., Supancic, P., Aldrian, F. & Danzer, R., 2016, In: Journal of Microelectronics and Electronic Packaging. 13, 1, p. 17-22 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  98. Published

    Mechanical properties of tape casted Lanthanum Tungstate for membrane substrate application

    Stournari, V., Deibert, W., Ivanov, M. E., Krautgasser, C., Bermejo, R. & Malzbender, J., 2016, In: Ceramics International : CI. 42, 14, p. 15177-15182 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  99. Published

    Modelling of edge crack formation and propagation in ceramic laminates using the stress-energy coupled criterion

    Sevecek, O., Kotoul, M., Leguillon, D. P., Martin, E. & Bermejo, R., 2016, In: Engineering Fracture Mechanics. 167, p. 45–55

    Research output: Contribution to journal › Article › Research › peer-review

  100. Published

    Residual lifetime determination of low temperature co-fired ceramics

    Majer, Z., Štegnerová, K., Hutar, P., Pletz, M., Bermejo, R. & Náhlík, L., 2016, Advances in Fracture and Damage Mechanics XV. Trans Tech Publications, Vol. 713. p. 266-269 4 p. (Key Engineering Materials; vol. 713).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  101. Published

    Subcritical crack growth in multilayer Low Temperature Co-fired Ceramics designed with surface compressive stresses

    Krautgasser, C., Danzer, R., Deluca, M., Supancic, P., Aldrian, F. & Bermejo, R., 2016, In: Journal of the European Ceramic Society. 36, p. 4095-4105 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  102. 2015
  103. Published

    Thermography and complementary measurements as tools to detect micro-irregularities in electronic components

    Röhrig, S., Petschenig, I., Bermejo, R., Hofstätter, M., Aldrian, F., Danzer, R. & Supancic, P., Dec 2015, In: Journal of ceramic science and technology. 6, 4, p. 255-260 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  104. Published

    Mechanical testing and fracture analyses of miniaturized ZnO-based multilayer components

    Macurova, K., Gruber, M., Pletz, M., Supancic, P., Danzer, R., Aldrian, F. & Bermejo, R., 26 Oct 2015

    Research output: Other contribution › Research

  105. Published

    Comparison of Different Methods for Stress and Deflection Analysis in Embedded die Packages during the Assembly Process

    Macurova, K., Bermejo, R., Pletz, M., Schöngrundner, R., Antretter, T., Krivec, T., Morianz, M., Brizoux, M. & Lecavelier, A., 1 Apr 2015, In: Journal of Microelectronics and Electronic Packaging. 12.2015, 2, p. 80-85 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  106. Published

    Heat development at the microscale in ceramic components - thermography and complementary tools

    Röhrig, S., Petschenig, I., Bermejo, R., Hofstätter, M., Aldrian, F., Danzer, R. & Supancic, P., 1 Apr 2015

    Research output: Other contribution › Research

  107. Published

    Mechanical characterization of miniaturized functional substrates and components in different environments

    Bermejo, R., Krautgasser, C., Deluca, M., Pletz, M., Supancic, P., Aldrian, F. & Danzer, R., 1 Apr 2015

    Research output: Other contribution › Research

  108. Published

    Application of the coupled stress-energy criterion to predict the fracture behavior of layered ceramics designed with internal compressive stresses.

    Leguillon, D. P., Martin, E., Sevecek, O. & Bermejo, R., 2015, In: European Journal of Mechanics - A/Solids. 54, p. 94-104 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  109. Published

    Design of alumina-zirconia composites with spatially tailored strength and toughness

    Chang, Y., Bermejo, R., Sevecek, O. & Messing, G. L., 2015, In: Journal of the European Ceramic Society. 35, p. 631-640

    Research output: Contribution to journal › Article › Research › peer-review

  110. Published

    Edge cracking due to a compressive residual stress in ceramic laminates

    Leguillon, D. P., Sevecek, O., Martin, E. & Bermejo, R., 2015, In: Comptes rendus mécanique .

    Research output: Contribution to journal › Article › Research › peer-review

  111. Published

    Fracture toughness and strength distribution at room temperature of zirconia tapes used for electrolyte supported solid oxide fuel cells

    Fleischhauer, F., Mark, T., Bermejo, R., Danzer, R., Mai, A., Graule, T. & Kübler, J., 2015, In: Journal of power sources. 275, p. 217-226

    Research output: Contribution to journal › Article › Research › peer-review

  112. Published

    High temperature mechanical properties of zirconia tapes used for electrolyte supported solid oxide fuel cells

    Fleischhauer, F., Bermejo, R., Danzer, R., Mai, A., Graule, T. & Kübler, J., 2015, In: Journal of power sources. 273, p. 237-243

    Research output: Contribution to journal › Article › Research › peer-review

  113. Published

    Influence of temperature and humidity on the strength of Low Temperature Co-fired Ceramics

    Krautgasser, C., Danzer, R., Supancic, P. & Bermejo, R., 2015, In: Journal of the European Ceramic Society. 35, p. 1823–1830

    Research output: Contribution to journal › Article › Research › peer-review

  114. Published

    Quantification of crystalline texture in ferroelectric materials by polarized Raman spectroscopy using Reverse Monte Carlo modelling

    Röhrig, S., Krautgasser, C., Bermejo, R., Jones, J. L., Supancic, P. & Deluca, M., 2015, In: Journal of the European Ceramic Society. 35, p. 4321-4325 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  115. Published

    Strength of an Electrolyte Supported Solid Oxide Fuel Cell

    Fleischhauer, F., Bermejo, R., Danzer, R., Mai, A., Graule, T. & Kuebler, J., 2015, In: Journal of power sources. 297, p. 158-167 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  116. Published

    Stress and Deflection Development During Die Embedding into Printed Circuit Boards

    Macurova, K., Angerer, P., Bermejo, R., Pletz, M., Schöngrundner, R., Antretter, T., Krivec, T., Morianz, M., Brizoux, M. & Lecavelier, A., 2015, In: Materials Today: Proceedings. 2, 2, p. 4196-4205 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  117. Published

    Thermography and Complemetary Measurements as Tool to Detect Micro-Irregularities in Electronic Components

    Röhrig, S., Petschenig, I., Bermejo, R., Hofstätter, M., Aldrian, F., Danzer, R. & Supancic, P., 2015, In: Journal of ceramic science and technology. p. 255-260

    Research output: Contribution to journal › Article › Research › peer-review

  118. Published

    Towards mussels under stress: novel concepts to design tough and reliable advanced ceramics: novel concepts to design tough and reliable advanced ceramics

    Bermejo, R., 2015

    Research output: Thesis › Habilitation thesis › peer-review

  119. Published

    Understanding the edge crack phenomenon in ceramic laminates

    Sevecek, O., Kotoul, M., Leguillon, D. P., Martin, E. & Bermejo, R., 2015, In: Frattura ed integrità strutturale. 34, 10, p. 408-416 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  120. 2014
  121. E-pub ahead of print

    Effect of aging on the onset of cracks due to redistribution of residual stresses in functionally graded environmental barrier coatings of mullite/ZrO2

    Mesquita-Guimarães, J., Garcia, E., Osendi, M. I., Sevecek, O. & Bermejo, R., 29 Jan 2014, (E-pub ahead of print) In: Composites / B. 61.2014, May, p. 199-205 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  122. Published

    Evaluation of subcritical crack growth in low temperature co-fired ceramics

    Bermejo, R., Supancic, P., Krautgasser, C. & Danzer, R., 10 Jan 2014, Mechanical Properties and Performance of Engineering Ceramics and Composites VIII - A Collection of Papers Presented at the 37th International Conf. on Advanced Ceramics and Composites, ICACC 2013. 2 ed. Vol. 34. p. 161-172 12 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  123. Published

    Comparison of different methods for stress and deflection analysis in embedded die packages during the assembly process

    Macurova, K., Bermejo Moratinos, R., Pletz, M., Schöngrundner, R., Antretter, T., Krivec, T., Morianz, M., Brizoux, M. & Lecavelier, A., 1 Jan 2014, Proceedings - 2014 47th International Symposium on Microelectronics, IMAPS 2014. p. 355-360 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  124. Published

    Analysis on the mechanical strength of WC-Co cemented carbides under uniaxial and biaxial bending

    Torres, Y., Bermejo Moratinos, R., Gotor, F. J., Chicardi, E. & Llanes, L., 2014, In: Materials and Design. 55, p. 851-856

    Research output: Contribution to journal › Article › Research › peer-review

  125. Published

    Determination of strength and fracture toughness of small ceramic discs using the small punch test and the ball-on-three-balls test

    Rasche, S., Strobl, S., Kuna, M., Bermejo Moratinos, R. & Lube, T., 2014, In: Procedia Materials Science. p. 961-966

    Research output: Contribution to journal › Article › Research › peer-review

  126. Published

    Effect of residuel stresses on the strength of glass-ceramic multilayer composites different microstructures

    Bermejo Moratinos, R., Krautgasser, C., Deluca, M., Strobl, S., Kraleva, I., Petschenig, I., Aldrian, F., Supancic, P. & Danzer, R., 2014, Praktische Metallographie Sonderband. p. 169-174

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  127. Published

    Improved Fracture Behavior of Alumina Microstructural Composites with Highly Textured Compressive Layers

    Chang, Y., Bermejo Moratinos, R. & Messing, G. L., 2014, In: Journal of the American Ceramic Society. 97, p. 3643-3651

    Research output: Contribution to journal › Article › Research › peer-review

  128. Published

    Influence of the T-stress on the crack bifurcation phenomenon in ceramic laminates

    Sevecek, O., Bermejo Moratinos, R., Profant, T. & Kotoul, M., 2014, In: Procedia Materials Science. 3, p. 1062-1067

    Research output: Contribution to journal › Article › Research › peer-review

  129. Published

    Mechanical Characterization of Ceramics: Designing with Brittle Materials

    Bermejo Moratinos, R. & Danzer, R., 2014, Comprehensive Hard Materials. p. 285-298

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  130. Published

    Numerical Analysis of Sub-Critical Crack Growth in Particulate Ceramic Composites

    Majer, Z., Pletz, M., Krautgasser, C., Nalik, L., Hutar, P. & Bermejo Moratinos, R., 2014, In: Procedia Materials Science. 3, p. 2071-2076

    Research output: Contribution to journal › Article › Research › peer-review

  131. Published

    On the determination of the stress-free temperature for alumina-zirconia multilayer structures

    Chlup, Z., Hadraba, H., Drdlik, D., Maca, K., Dlouhy, I. & Bermejo, R., 2014, In: Ceramics International : CI. 40.2014, 4, p. 5787-5893 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  132. Published

    Processing and characterisation of cermet/hardmetal laminates with strong interfaces

    Gotor, F. J., Bermejo Moratinos, R., Cordoba, J. M., Chicardi, E., Medri, V., Dalle Fabbriche, D. & Torres, Y., 2014, In: Materials and Design. 58, p. 226-233

    Research output: Contribution to journal › Article › Research › peer-review

  133. Published

    Simulation of stress distribution in assembled silicon dies and deflection of printed circuit boards

    Macurova, K., Angerer, P., Antretter, T., Bermejo Moratinos, R., Maia, W., Schöngrundner, R., Krivec, T., Morianz, M. & Brizoux, M., 2014, Proceedings of the 15th International Conference on Thermal, Mechanical & Multi-Physics Simulation and Experiments in Microelectronics and Microsystems EuroSimE 2014.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  134. 2013
  135. Published

    Layered Ceramics

    Bermejo, R. & Deluca, M., 1 May 2013, Handbook of Advanced Ceramics: Materials, Applications, Processing, and Properties: Second Edition. Amsterdam: Elsevier, p. 733-751 19 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  136. Published

    Multi-physics simulation of the component attachment within embedding process

    Macurova, K., Kharicha, A., Pletz, M., Mataln, M., Bermejo, R., Schongrundner, R., Krivec, T., Antretter, T., Maia, W., Morianz, M. & Brizoux, M., 1 Apr 2013, 14th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2013. Institute of Electrical and Electronics Engineers, p. 1-6 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  137. Published

    Crack path prediction in layered ceramics designed with residual stresses

    Bermejo Moratinos, R., 2013, Proceedings of the 4th International Conference on Crack Paths. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  138. Published

    Fracture Behaviour of Layered Alumina Microstructural Composites with Highly Textured Layers

    Pavlacka, R., Bermejo Moratinos, R., Chang, Y., Green, D. J. & Messing, G. L., 2013, In: Journal of the American Ceramic Society. 96, p. 1577-1585

    Research output: Contribution to journal › Article › Research › peer-review

  139. Published

    Influence of the residual stresses on the crack deflection in ceramic laminates

    Sevecek, O., Kotoul, M., Profant, T. & Bermejo, R., 2013, 13th International Conference on Fracture 2013, ICF 2013. Vol. 2. p. 881-890 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  140. Published

    Mechanical Properties of Low-Temperature Co-Fired Ceramics Fired at Different Temperatures

    Makarovic, K., Bermejo Moratinos, R., Kraleva, I., Holc, J., Hrovat, M., Bencan, A., zarnik, M. S., Belavic, D. & Kosec, M., 2013, Proceedings of the 48th International Conference on Microelectronics, Devices and Materials. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  141. Published

    Prediction of the crack bifurcation in layered ceramics with high residual stresses

    Sevecek, O., Bermejo Moratinos, R. & Kotoul, M., 2013, In: Engineering Fracture Mechanics. 108, p. 120-138

    Research output: Contribution to journal › Article › Research › peer-review

  142. Published

    Strategies to optimize the strength and fracture resistance of ceramic laminates

    Bermejo Moratinos, R., Chlup, Z., Sestakova, L., Sevecek, O. & Danzer, R., 2013, Mechanical properties and performance of engineering ceramics and composites. Vol. VII. p. 163-174 (Ceramic engineering and science proceedings ; vol. 33, no. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  143. Published

    Subcritical Crack Growth on Low Temperature Co-fired Ceramics under Biaxial Loading

    Bermejo Moratinos, R., Supancic, P., Krautgasser, C., Morrell, R. & Danzer, R., 2013, In: Engineering Fracture Mechanics. 100, p. 108-121

    Research output: Contribution to journal › Article › Research › peer-review

  144. 2012
  145. Published

    Mechanical properties of low temperature co-fired ceramics: Testing methodologies for strength characterization

    Bermejo, R., Dec 2012, In: Informacije MIDEM. 42, 4, p. 254-259 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  146. Published

    Effect of combined thermo-mechanical loading on the domain texture and the fracture resistance of lead zirconate titanate (PZT) ceramics

    Deluca, M., Krautgasser, C., Bermejo Moratinos, R., Foronda, H., Jones, J. & Supancic, P., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  147. Published

    Experimental approach to assess the effect of metallization on the strength of functional ceramic components

    Bermejo Moratinos, R., Supancic, P., Aldrian, F. & Danzer, R., 2012, In: Scripta materialia. 66, p. 546-549

    Research output: Contribution to journal › Article › Research › peer-review

  148. Published

    Influence of deposited metal structures on the failure mechanisms of silicon-based components

    Deluca, M., Bermejo Moratinos, R., Pletz, M., Wießner, M., Supancic, P. & Danzer, R., 2012, In: Journal of the European Ceramic Society. 32, p. 4371-4380

    Research output: Contribution to journal › Article › Research › peer-review

  149. Published

    Influence of measurement uncertainties on the determination of the Weibull modulus

    Bermejo Moratinos, R., Supancic, P. & Danzer, R., 2012, In: Journal of the European Ceramic Society. 32, p. 251-255

    Research output: Contribution to journal › Article › Research › peer-review

  150. Published

    Layered ceramics with internal compressive stresses to improve strength and toughness

    Bermejo Moratinos, R., Chlup, Z., Sestakova, L., Sevecek, O. & Danzer, R., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  151. Published

    Mechanical Characterization of PZT Ceramics for Multilayer Piezoelectric Actuators

    Bermejo Moratinos, R. & Deluca, M., 2012, In: Journal of ceramic science and technology. 3, p. 159-168

    Research output: Contribution to journal › Article › Research › peer-review

  152. Published

    Mechanical Properties of LTCC: Testing Methodologies for Strength Characterization

    Bermejo Moratinos, R., 2012, Proceedings of the 48th International Conference on Microelectronics, Devices and Materials.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  153. Published

    Ni–NiO composites obtained by controlled oxidation of green compacts

    Cabanas-Polo, S., Bermejo Moratinos, R., Ferrari, B. & Sanchez-Herencia, J., 2012, In: Corrosion science. 55, p. 172-179

    Research output: Contribution to journal › Article › Research › peer-review

  154. Published

    Strategies to optimize the strength and fracture resistance of ceramic laminates

    Bermejo Moratinos, R., Chlup, Z., Sestakova, L., Seveck, O. & Danzer, R., 2012, International Conference on Advanced Ceramics and Composites. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  155. Published

    Study of crack growth in multilayered ceramic/ceramic materials with strong interfaces

    Kotoul, M., Sevecek, O., Vyslouzil, T. & Bermejo, R., 2012, ECCM 2012 - Composites at Venice, Proceedings of the 15th European Conference on Composite Materials.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  156. Published

    The effect of the phase composition on the mechanical properties of LTCC material

    Makarovic, K., Bermejo Moratinos, R., Kraleva, I., Bencan, A., Hrovat, M., Holc, J., Malic, B. & Kosec, M., 2012, In: International journal of applied ceramic technology. 10, p. 449-457

    Research output: Contribution to journal › Article › Research › peer-review

  157. Published

    ZACCARINIITE, RhNiAs, A NEW PLATINUM-GROUP MINERAL FROM LOMA PEGUERA, DOMINICAN REPUBLIC

    Vymazalová, A., Laufek, F., Drabek, M., Stanley, C., Baker, R., Bermejo Moratinos, R., Garuti, G., Thalhammer, O., Proenza, J. & Longo, F., 2012, In: The Canadian Mineralogist. 50, p. 1321-1329

    Research output: Contribution to journal › Article › Research › peer-review

  158. 2011
  159. Published

    Charakterisierung von LTCC-Leiterplatten unter biaxialer Belastung: Effekt der Metallisierung auf die Festigkeit

    Bermejo Moratinos, R., Sestakova, L., Kraleva, I., Supancic, P. & Danzer, R., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  160. Published

    Evaluation of the Strength of Low Temperature Co-fired Ceramics under Biaxial Stress

    Bermejo Moratinos, R., Supancic, P., Kraleva, I., Krautgasser, C., Aldrian, F., Morrell, R. & Danzer, R., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  161. Published

    Fracture Mechanisms of Structural and Functional Multilayer Ceramic Structures

    Bermejo Moratinos, R., Sestakova, L., Grünbichler, H., Lube, T., Supancic, P. & Danzer, R., 2011, Key engineering materials. Vol. 465. p. 41-46 (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  162. Published

    Fracture resistance of a doped PZT for multilayer actuators: Effect of mechanical load and temperature

    Bermejo Moratinos, R., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  163. Published

    Influence of the Load Dependent Material Properties on the Performance of Multilayer Piezoelectric Actuators

    Grünbichler, H., Kreith, J., Bermejo Moratinos, R., Krautgasser, C. & Supancic, P., 2011, IUTAM Symposium on Multiscale Modelling of Fatigue, Damage and Fracture in Smart Materials. p. 243-252

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  164. Published

    Local strength measurement technique for miniaturised silicon-based components

    Deluca, M., Pletz, M., Morianz, M., Stahr, J., Supancic, P., Danzer, R. & Bermejo, R., 2011, 2011 12th Int. Conf. on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2011. 5765812

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  165. Published

    Numerical investigation of the process of embedding components into printed circuit boards

    Pletz, M., Bermejo, R., Supancic, P., Stahr, J. & Morianz, M., 2011, 2011 12th Int. Conf. on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2011. 5765814

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  166. Published

    Strategies for fracture toughness, strength and reliability optimisation of ceramic-ceramic laminates

    Sestakova, L., Bermejo Moratinos, R., Chlup, Z. & Danzer, R., 2011, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 102, p. 613-626

    Research output: Contribution to journal › Article › Research › peer-review

  167. Published

    Strength and fracture analysis of silicon-based components for embedding

    Deluca, M., Bermejo Moratinos, R., Pletz, M., Supancic, P. & Danzer, R., 2011, In: Journal of the European Ceramic Society. 31, p. 549-558

    Research output: Contribution to journal › Article › Research › peer-review

  168. Published

    Strength reliability of 3D low temperature co-fired multilayer ceramics under biaxial loading

    Bermejo Moratinos, R., Supancic, P., Kraleva, I., Morrell, R. & Danzer, R., 2011, In: Journal of the European Ceramic Society. 31, p. 745-753

    Research output: Contribution to journal › Article › Research › peer-review

  169. 2010
  170. Published

    Determination of mechanical properties of brittle materials by using the small punch test and the ball on three balls test

    Rasche, S., Bermejo, R., Kuna, M. & Danzer, R., 1 Dec 2010.

    Research output: Contribution to conference › Paper › peer-review

  171. Published

    Fracture behaviour of low temperature cofired ceramics under biaxial loading: Influence of metal-ceramic internal architecture

    Bermejo, R., Kraleva, I., Morrell, R., Aldrian, F., Supancic, P. & Danzer, R., 1 Dec 2010.

    Research output: Contribution to conference › Paper › peer-review

  172. Published

    Characterisation and modelling of the mechanical reliability of semiconductor components for Printed Circuit Boards

    Bermejo Moratinos, R., Deluca, M., pletz, M., Supancic, P. & Danzer, R., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  173. Published

    Crack Propagation in Layered Ceramics under Flexural Loading

    Bermejo Moratinos, R. & Danzer, R., 2010, Proceedings of the XI International Conference of the European Ceramic Society. p. 98-103

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  174. Published

    Failure resistance optimisation in layered ceramics designed with strong interfaces

    Bermejo Moratinos, R. & Danzer, R., 2010, In: Journal of ceramic science and technology. 1, 1, p. 15-20

    Research output: Contribution to journal › Article › Research › peer-review

  175. Published

    Fracture resistance of a doped PZT ceramic for multilayer piezoelectric actuators: Effect of mechanical load and temperature

    Bermejo Moratinos, R., Grünbichler, H., Kreith, J. & Auer, C., 2010, In: Journal of the European Ceramic Society. 30, p. 705-712

    Research output: Contribution to journal › Article › Research › peer-review

  176. Published

    High failure resistance layered ceramics using crack bifurcation and interface delamination as reinforcement mechanisms

    Bermejo Moratinos, R. & Danzer, R., 2010, In: Engineering Fracture Mechanics. 77, p. 2126-2135

    Research output: Contribution to journal › Article › Research › peer-review

  177. Published

    Influence of metallisation on the mechanical behaviour of Low Temperature Co-fired Ceramics under biaxial loading

    Bermejo Moratinos, R., Lucie, S., Kraleva, I., Supancic, P. & Danzer, R., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  178. Published

    Mechanical behaviour of Low Temperature Cofired Ceramics (LTCCs) under biaxial loading

    Bermejo Moratinos, R., Aldrian, F., Supancic, P. & Morrell, R., 2010, Proceedings of the XI International Conference of the European Ceramic Society. p. 277-280

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  179. Published

    Mechanical characterisation of miniaturised direct inkjet printed 3YTZP specimens for microelectronic applications

    Özkol, E., Wätjen, A., Bermejo Moratinos, R., Deluca, M., Ebert, J., Danzer, R. & Telle, R., 2010, In: Journal of the European Ceramic Society. 30, p. 3145-3152

    Research output: Contribution to journal › Article › Research › peer-review

  180. Published

    Modelling of the ferroic material behaviour of piezoelectrics: Characterisation of temperature-sensitive functional properties

    Grünbichler, H., Kreith, J., Bermejo Moratinos, R., Supancic, P. & Danzer, R., 2010, In: Journal of the European Ceramic Society. 30, p. 249-254

    Research output: Contribution to journal › Article › Research › peer-review

  181. Published

    Numerical analysis on special cracking phenomena of residual compressive inter-layers in ceramic laminates

    Chen, C., Bermejo Moratinos, R. & Kolednik, O., 2010, In: Engineering Fracture Mechanics. 77, p. 2567-2576

    Research output: Contribution to journal › Article › Research › peer-review

  182. Published

    Optimal strength and fracture toughness of damage tolerant multilayer ceramics

    Bermejo, R., Sestakova, L., Lube, T. & Danzer, R., 2010, 18th European Conference on Fracture: Fracture of Materials and Structures from Micro to Macro Scale.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  183. Published

    Prediction of crack propagation in layered ceramics with strong interfaces

    Nahlik, L., Lucie, S., Hutar, P. & Bermejo Moratinos, R., 2010, In: Engineering Fracture Mechanics. 77, p. 2192-2199

    Research output: Contribution to journal › Article › Research › peer-review

  184. Published

    Raman spectroscopy for the investigation of indentation-induced domain texturing in lead zirconate titanate piezoceramics

    Deluca, M., Bermejo Moratinos, R., Grünbichler, H., Presser, V., Danzer, R. & Nickel, K. G., 2010, In: Scripta materialia. 63, p. 343-346

    Research output: Contribution to journal › Article › Research › peer-review

  185. Published

    Strength and fracture analysis of silicon chips to be embedded into printed circuit boards

    Deluca, M., Bermejo, R., Pletz, M. & Supancic, P., 2010, 18th European Conference on Fracture: Fracture of Materials and Structures from Micro to Macro Scale.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  186. Published

    Strength and fracture characteristics of metal-piezoceramic multilayers for actuator application

    Grünbichler, H., Deluca, M., Bermejo Moratinos, R., Auer, C. & Danzer, R., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  187. 2009
  188. Published

    Mechanical behaviour of low temperature co-fired ceramics under biaxial loading: Influence of internal architecture on the fracture response

    Bermejo, R., Kraleva, I., Aldrian, F., Supancic, P. & Morrell, R., 1 Dec 2009, 11th International Conference and Exhibition of the European Ceramic Society 2009. Vol. 1. p. 276-280 5 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  189. Published

    Adaptation of a universal testing machine to characterise the material response of multilayered piezoelectric actuators under fully coupled loading scenarios

    Kreith, J., Grünbichler, H. & Bermejo Moratinos, R., 2009, Proceedings of the Fourth International Workshop on Direct and Inverse Problems in Piezoelectricity.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  190. Published

    Adaption of a materials testing machine to characterise piezoelectric actuators

    Kreith, J., Grünbichler, H. & Bermejo Moratinos, R., 2009, Proceedings of the ELECTROCERAMICS XI: Piezoelectrics, August 31 - September 4, 2008, Manchester, UK. Freer, R. & Leach, C. (eds.).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  191. Published

    Evaluation of toughness ansiotropy on doped PZT ceramics as a function of load and temperature

    Bermejo Moratinos, R., Grünbichler, H., Kreith, J. & Danzer, R., 2009, Proceedings of the Fourth International Workshop on Direct and Inverse Problems in Piezoelectricity.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  192. Published

    Fracture of layered ceramics

    Bermejo Moratinos, R., Ceseracciu, L., Llanes, L. & Anglada, M., 2009, Key engineering materials. Vol. 409. p. 94-106 (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  193. Published

    Fracture response of low temperature cofired ceramics

    Bermejo Moratinos, R., kraleva, I., Morrell, R., Aldrian, F., Supancic, P. & Danzer, R., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  194. Published

    Fracture response of piezoceramic materials for injection systems

    Grünbichler, H., Bermejo Moratinos, R., Auer, C. & Danzer, R., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  195. Published

    Influence of Internal Architectures on the Fracture Response of LTCC Components

    Bermejo Moratinos, R., Kraleva, I., Antoni, M., Supancic, P. & Morrell, R., 2009, Key engineering materials. Vol. 409. p. 275-278 (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  196. Published

    Influence of thermal oxidation treatment on the mechanical properties of Al2O3/Ni

    Cabanas-Polo, S., Urbina, R., Bermejo Moratinos, R. & Sanchez-Herencia, A. J., 2009, Proceedings of the XI International Conference of the European Ceramic Society.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  197. Published

    Material characterisation of ferroics, piezoelectrics: Material properties for a constitutive law

    Grünbichler, H., Kreith, J., Bermejo Moratinos, R., Supancic, P. & Athenstaedt, W., 2009, Proceedings of the Fourth International Workshop on Direct and Inverse Problems in Piezoelectricity.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  198. Published

    Modelling of ferroic material behaviour of piezoelectrics: Characterisation of temperature-sensitive functional properties

    Grünbichler, H., Kreith, J., Bermejo Moratinos, R., Supancic, P. & Danzer, R., 2009, Proceedings of Electroceramics XI: Piezoelectrics, 31.8 - 4.9.2008, Man UK. Freer, R. & Leach, C. (eds.). p. 1-7

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  199. 2008
  200. Published

    Ber-06-2008-Epcos

    Kreith, J., Grünbichler, H. & Bermejo Moratinos, R., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  201. Published

    Comparative Study of the R-curve Behaviour of Al2O3-ZrO2 Laminates designed with External and Internal Compressive Layers

    Bermejo Moratinos, R., Pascual-Herrero, J., Lube, T. & Danzer, R., 2008, Proceedings of the X International Conference of the European Ceramic Society. p. 243-247

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  202. Published

    Evaluation of the toughness anisotropy in PZT based multilayer actuators

    Bermejo Moratinos, R., Kreith, J., Grünbichler, H. & Danzer, R., 2008, Global road map for ceramics. Second International Congress on ceramics. p. 1-5

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  203. Published

    Evaluation of the toughness anisotropy in PZT-based multilayered actuators

    Bermejo Moratinos, R., Grünbichler, H., Kreith, J. & Danzer, R., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  204. Published

    Evaluation of Toughness Anisotropy on Doped PZT Ceramics as a Function of Load and Temperature

    Bermejo Moratinos, R., Grünbichler, H., Kreith, J. & Danzer, R., 2008, 17th European Conference on Fracture: Multilevel Approach to Fracture of Materials, Components and Structures. p. 1701-1708

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  205. Published

    Fatigue Behavior of Alumina-Zirconia Multilayered Ceramics

    Bermejo Moratinos, R., Torres, Y., Anglada, M. & Llanes, L., 2008, In: Journal of the American Ceramic Society. 91, p. 1618-1625

    Research output: Contribution to journal › Article › Research › peer-review

  206. Published

    High-temperature mechanical behaviour of layered ceramics

    Bermejo Moratinos, R., Llanes, L., Sanchez-Herencia, A. J. & Baudin, C., 2008, Global road map for ceramics. Second International Congress on ceramics. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  207. Published

    Influence of internal architectures on the fracture response of LTCC components

    Bermejo Moratinos, R., kraleva, I., Antoni, M., Supancic, P. & Morrell, R., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  208. Published

    Influence of notch radius and R-curve behaviour on the fracture toughness evaluation of WC-Co cemented carbides

    Torres, Y., Bermejo Moratinos, R., Llanes, L. & Anglada, M., 2008, In: Engineering Fracture Mechanics. 75, p. 4422-4430

    Research output: Contribution to journal › Article › Research › peer-review

  209. Published

    Investigation of the behavior of multilayer piezoelectric actuators: Modeling and Experiments.

    Grünbichler, H., Kreith, J., Bermejo Moratinos, R., Supancic, P. & Danzer, R., 2008, Proceedings of SMASIS08. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  210. Published

    Loading Configuration Effects on the Strength Reliability of Alumina–Zirconia Multilayered Ceramics

    Bermejo Moratinos, R., Torres, Y. & Llanes, L., 2008, In: Composites science and technology. 68, p. 244-250

    Research output: Contribution to journal › Article › Research › peer-review

  211. Published

    Modelling of ferroic material behaviour of piezoelectrics: Characterisation of temperature-sensitive functional properties

    Grünbichler, H., Kreith, J., Bermejo Moratinos, R., Supancic, P. & Danzer, R., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  212. Published

    Modelling of the ferroic behaviour of a soft PZT-ceramic - Material properties for a constitutive law

    Grünbichler, H., Kreith, J., Bermejo Moratinos, R. & Supancic, P., 2008, Global road map for ceramics. Second International Congress on ceramics. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  213. Published

    Monte Carlo simulation of Weibull distribution of ceramic strength values

    Ambrožič, M., Bermejo Moratinos, R., Supancic, P. & Kosmač, T., 2008, Proceedings of the 2008 SEM XI International Congress and Exposition on Experimental and Applied Mechanics. p. 19-22

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  214. Published

    Optimal Strength and Toughness of Al2O3-ZrO2-Laminates Designed with External or Internal Compressive Layers

    Bermejo Moratinos, R., Pascual-Herrero, J., Lube, T. & Danzer, R., 2008, In: Journal of the European Ceramic Society. 28, p. 1575-1583

    Research output: Contribution to journal › Article › Research › peer-review

  215. Published

    Position resolved residual stress determination in alumina-zirconia multilayered ceramics

    Maier, G., Keckes, J., Brechbuehl, J., Guerault, H. & Bermejo Moratinos, R., 2008, In: Materials Science Forum . 571-572, p. 421-425

    Research output: Contribution to journal › Article › Research › peer-review

  216. 2007

  217. Processing optimisation and fracture behaviour of layered ceramic composites with highly compressive layers

    Bermejo, R., Baudín, C., Moreno, R., Llanes, L. & Sánchez-Herencia, A. J., Jul 2007, In: Composites science and technology. 67, 9, p. 1930-1938 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  218. Published

    B-MCL 2007-28

    Harrer, W., Bermejo Moratinos, R., Supancic, P., Kreith, J., Wang, Z. & Danzer, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  219. Published

    Druckversuch zur Charakterisierung von Piezokeramiken

    Grünbichler, H., Kreith, J., Maier, G., Bermejo Moratinos, R., Paul, S., Supancic, P. & Danzer, R., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  220. Published

    Geometry Effect on the Thermal Shock Response of Al2O3/ZrO2 Multilayered Ceramics

    Bermejo Moratinos, R., Supancic, P. & Lube, T., 2007, Key engineering materials. Vol. 333. p. 251-254 (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  221. Published

    Geometry effect on the thermal shock response of Al2O 3/ZrO2 multilayered ceramics

    Bermejo, R., Supancic, P. & Lube, T., 2007, In: Key Engineering Materials. 333, p. 251-254 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  222. Published

    High Temperature Mechanical Behaviour of Flaw Tolerant Almunia-Zirconia Multilayered Ceramics

    Bermejo Moratinos, R., Sánchez-Herencia, A. J., Llanes, L. & Baudín, C., 2007, In: Acta materialia. 55, p. 4891-4901

    Research output: Contribution to journal › Article › Research › peer-review

  223. Published

    Optimierung des R-Kurvenverhaltens von Al2O3-ZrO2 Schichtkeramiken mit oberflächennahen und internen Druckeigenspannungen

    Bermejo Moratinos, R., Pascual-Herrero, J., Lube, T. & Danzer, R., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  224. Published

    Šiření indentačních trhlin v silně vázaných laminátech na bázi Al2O3 a ZrO2

    Hadraba, H., Chlup, Z., Maca, K. & Bermejo Moratinos, R., 2007, Křehký lom 2007 - Porušování a design materiálů. p. 219-230

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  225. Published

    Threshold Strength Evaluation on an Al2O3-ZrO2 Multilayered System

    Bermejo Moratinos, R., Torres, Y., Baudin, C., Sanchez-Herencia, J., Pascual Herrero, J., Anglada, M. & Llanes, L., 2007, In: Journal of the European Ceramic Society. 27, p. 1443-1448

    Research output: Contribution to journal › Article › Research › peer-review

  226. 2006

  227. Tensiones residuales en cerámicas multicapa de Al2O3-ZrO2: naturaleza, evaluación y consecuencias sobre la integridad estructural

    Bermejo, R., Sánchez-Herencia, A. J., Baudín, C. & Llanes, L., 3 Nov 2006, In: Boletín de la Sociedad Española de Cerámica y Vidrio . p. 352-357 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  228. Residual stresses, strength and toughness of laminates with different layer thickness ratios

    Bermejo, R., Torres, Y., Sánchez-Herencia, A. J., Baudín, C., Anglada, M. & Llanes, L., Oct 2006, In: Acta materialia. 54, 18, p. 4745-4757 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  229. Fracture behaviour of an Al2O3-ZrO2 multi-layered ceramic with residual stresses due to phase transformations

    Bermejo, R., Torres, Y., Sánchez-Herencia, A. J., Baudín, C., Anglada, M. & Llanes, L., Jan 2006, In: Fatigue & fracture of engineering materials & structures : Fatigue and fracture of engineering materials and structures. 29, 1, p. 71-78 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  230. Published

    4th Year Progress Report & Final Report 2006-36a

    Lube, T., Pascual-Herrero, J. & Bermejo Moratinos, R., 2006

    Research output: Book/Report › Commissioned report › Research

  231. Published

    B-MCL 2006-65

    Danzer, R., Supancic, P., Grünbichler, H., Bermejo Moratinos, R., Kreith, J. & Binder, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  232. Published

    Contact strength measurements on aluminia and shield 2006-18

    Lube, T., Bermejo Moratinos, R. & Pascual Herrero, J., 2006

    Research output: Book/Report › Commissioned report › Research

  233. Published

    Multilayered ceramics to improve reliability of structural components

    Bermejo, R., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  234. Published

    Risswiderstand in keramischen Schichtverbunden

    Pascual-Herrero, J., Lube, T., Danzer, R. & Bermejo, R., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  235. Published

    Task Report Task K: Fracture Mechanical Analysis Reliability 2006-36b

    Lube, T., Pascual-Herrero, J. & Bermejo Moratinos, R., 2006

    Research output: Book/Report › Commissioned report › Research

  236. Published

    Thermal Shock Features of Alumina-Zirconia Layered Ceramics

    Bermejo Moratinos, R., Supancic, P. & Lube, T., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  237. 2005

  238. Residual stress profile determined by piezo-spectroscopy in alumina/alumina-zirconia layers separated by a compositionally graded intermediate layer

    Popa, M., Moreno, J. M. C., Hvizdoš, P., Bermejo, R. & Anne, G., 1 Dec 2005, Key engineering materials. Vol. 290. p. 328-331 4 p. (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  239. Published

    Thermal Shock Bavior of an Al2O3/ZrO2 Multilayered Ceramic with Residual Stresses due to Phase Transformations

    Bermejo, R., Lanes, L., Anglada, M., Supancic, P. & Lube, T., 2005, Key engineering materials. Vol. 290. p. 191-198 (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  240. Published

    Thermal shock behavior of an Al2O3/ZrO2 multilayered ceramic with residual stresses due to phase transformations

    Bermejo, R., Llanes, L., Anglada, M., Supancic, P. & Lube, T., 2005, In: Key Engineering Materials. 290, p. 191-198 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

View graph of relations

Contact

Phone: 4100

Latest Research Output

View more (219)