Jozef Keckes

101 - 200 out of 318Page size: 100

Research output

  1. 2016
  2. Published

    In-situ Observation of Cross- Sectional Microstructural Changes and Stress Distributions in Fracturing TiN Thin Film during Nanoindentation

    Zeilinger, A., Todt, J., Krywka, C., Müller, M., Ecker, W., Sartory, B., Meindlhumer, M., Stefenelli, M., Daniel, R., Mitterer, C. & Keckes, J., 7 Mar 2016, In: Scientific reports (London : Nature Publishing Group). 6:22670, p. 1-14 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Advanced characterization methods for wear resistant hard coatings: A review on recent progress

    Tkadletz, M., Schalk, N., Daniel, R., Keckes, J., Czettl, C. & Mitterer, C., 2016, In: Surface & coatings technology. 285, p. 31-46 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Al-rich cubic Al0.8Ti0.2N coating with self-organized nano-lamellar microstructure: Thermal and mechanical properties

    Todt, J., Zalesak, J., Daniel, R., Pitonak, R., Köpf, A., Weißenbacher, R., Sartory, B., Mitterer, C. & Keckes, J., 2016, In: Surface & coatings technology. 291, p. 89-93 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Carbon microparticles from organosolv lignin as filler for conducting Poly(lactic acid)

    Köhnke, J., Fürst, C., Unterweger, C., Rennhofer, H., Lichtenegger, H. C., Keckes, J., Emsenhuber, G., Mahendran, A. R., Liebner, F. & Gindl-Altmutter, W., 2016, In: Cellular polymers. 8, 6

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Combinatorial refinement of thin-film microstructure, properties and process conditions: Iterative nanoscale search for self-assembled TiAlN nanolamellae

    Zalesak, J., Todt, J., Pitonak, R., Köpf, A., Weißenbacher, R., Sartory, B., Burghammer, M., Daniel, R. & Keckes, J., 2016, In: Journal of applied crystallography. 49, 6, p. 2217-2225 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Cross-sectional stress distribution in AlxGa1-xN heterostructure on Si(111) substrate characterized by ion beam layer removal method and precession electron diffraction

    Reisinger, M., Zalesak, J., Daniel, R., Tomberger, M., Weiss, J. K., Darbal, A. D., Petrenec, M., Zechner, J., Daumiller, I., Ecker, W., Sartory, B. & Keckes, J., 2016, In: Materials and Design. 106, p. 476-481 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Design of multilayer metallization to reduce mechanical loading: Effect of growth conditions on interface stability and thermo-mechanical properties of sputtered Cu films on Si with and without WTi barrier layers

    Souli, I., Terziyska, V., Keckes, J., Zechner, J. & Mitterer, C., 2016.

    Research output: Contribution to conference › Presentation › Research

  9. Published

    Dry, hydrophobic microfibrillated cellulose powder obtained in a simple procedure using alkyl ketene dimer

    Yan, Y., Amer, H., Rosenau, T., Zollfrank, C., Dörrstein, J., Jobst, C., Zimmermann, T., Keckes, J., Veigel, S., Gindl-Altmutter, W. & Li, J., 2016, In: Cellulose. 23.2016, 2, p. 1189-1197 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Evolution of structure, stresses and mechanical properties of a fcc/hex-AlCrN multilayer system upon thermal loading revealed by cross-sectional X-ray nanodiffraction and micromechanical testing

    Jäger, N., Klima, S., Hruby, H., Mitterer, C., Keckes, J. & Daniel, R., 2016.

    Research output: Contribution to conference › Poster › Research

  11. Published

    Integrated experimental and computational approach for residual stress investigation near through-silicon vias

    Deluca, M., Hammer, R., Keckes, J., Kraft, J., Schrank, F., Todt, J., Robach, O., Micha, J. S. & Defregger, S., 2016, In: Journal of applied physics. 120, 19

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Interface controlled microstructure evolution in nanolayered thin films

    Bartosik, M., Keckes, J., Persson, P. O. Å., Riedl, H. & Mayrhofer, P. H., 2016, In: Scripta materialia. 123, p. 13-16 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Lignocellulose Nanofiber-Reinforced Polystyrene Produced from Composite Microspheres Obtained in Suspension Polymerization Shows Superior Mechanical Performance

    Ballner, D., Herzele, S., Keckes, J., Edler, M., Griesser, T., Saake, B., Liebner, F., Potthast, A., Paulik, C. & Gindl-Altmutter, W., 2016, In: ACS Applied Materials & Interfaces. 8, 21, p. 13520-13525 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    MACRO- and MICROSCOPIC Properties of Gradient Ultra-High-Strength seamless Steel Tubes Produced by dedicated thermo-mechanical treatments

    Winter, G., Klarner, J., Buchmayr, B. & Keckes, J., 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  15. Published

    Nano-machining for advanced X-ray crystal optics

    Záprazný, Z., Korytár, D., Jergel, M., Šiffalovič, P., Halahovets, Y., Keckes, J., Matko, I., Ferrari, C., Vagovič, P. & Mikloška, M., 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  16. Published

    Nanostructured CVD coatings and cemented carbides-A perfect match?

    Köpf, A., Keckes, J., Todt, J., Pitonak, R. & Weissenbacher, R., 2016, World PM 2016 Congress and Exhibition.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    Novel TiALN coating with special nanostructure, deposited by HR MT-CVD [Neuartige TiALN-Beschichtung mit spezieller nanostruktur, abgeschieden mittels HR MT-CVD]

    Pitonak, R., Köpf, A., Weißenbacher, R., Keckes, J. & Tod, J., 2016, In: Keramische Zeitschrift. 68, 2, p. 111-117 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Spatial material heterogeneity: A strategy for fracture toughness enhancement of nanostructured films

    Daniel, R., Zalesak, J., Mitterer, C., Sartory, B., Meindlhumer, M. & Keckes, J., 2016.

    Research output: Contribution to conference › Presentation › Research

  19. Published

    Structure-stress relationships in nanocrystalline multi-layered AlCrN coatings studied by cross-sectional X-ray nanodiffraction

    Klima, S., Jäger, N., Hruby, H., Mitterer, C., Keckes, J. & Daniel, R., 2016.

    Research output: Contribution to conference › Poster › Research

  20. Published

    X-ray nanodiffraction analysis of stress oscillations in a W thin film on through-silicon via

    Todt, J., Hammer, H., Sartory, B., Burghammer, M., Kraft, J., Daniel, R., Keckes, J. & Defregger, S., 2016, In: Journal of applied crystallography. 49, p. 182-187 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  21. 2015
  22. Published

    Experimental Characterization and Modeling of Residual Stress Grandiens across Straight and Bent Seamless Steel Tubes

    Winter, G., Klarner, J., Staron, P., Buchmayr, B. & Keckes, J., 16 Apr 2015, p. 231 - 236.

    Research output: Contribution to conference › Presentation › Research

  23. Published

    Virtual process design for cold formed components

    Schratter, S., Keckes, J., Winter, G. & Buchmayr, B., 16 Apr 2015, Material Forming ESAFORM 2015. Trans Tech Publications, p. 1279 - 1284 (Key Engineering Materials ; vol. Vol 651-653).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. Published

    Copper diffusion into single-crystalline TiN studied by transmission electron microscopy and atom probe tomography

    Mühlbacher, M., Mendez Martin, F., Sartory, B., Schalk, N., Keckes, J., Lu, J., Hultman, L. & Mitterer, C., 2015, In: Thin solid films. 574, p. 103-109

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Determination of residual stresses and fracture properties on a local scale

    Kiener, D., Treml, R., Kozic, D., Brunner, R., Keckes, J. & Zechner, J., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  26. Published

    Dry-blasting of CVD α-Al2O3 hard coatings: Influence of blasting media size, hardness and coating texture on the stress-depth gradients investigated by X-ray nanodiffraction

    Tkadletz, M., Schalk, N., Keckes, J., Krajinovic, I., Czettl, C. & Mitterer, C., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  27. Published

    Evaluation of TiN diffusion barrier layers with different microstructures by transmission electron microscopy and atom probe tomography

    Mühlbacher, M., Mendez Martin, F., Sartory, B., Chitu, L., Lu, J., Schalk, N., Keckes, J., Hultman, L. & Mitterer, C., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  28. Published

    Experimental characterization and modelling of triaxial residual stresses in straightened railway rails

    Kaiser, R., Stefenelli, M., Hatzenbichler, T., Antretter, T., Hofmann, M., Keckes, J. & Buchmayr, B., 2015, In: The Journal of Strain Analysis for Engineering Design. 50, 3, p. 190-198 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    How Residual Stresses Affect the Fracture Properties of Layered Thin Films

    Kiener, D., Treml, R., Kozic, D., Zalesak, J., Zechner, J., Keckes, J., Schöngrundner, R., Gänser, H.-P. & Brunner, R., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  30. Published

    Investigation of residual stress gradients in alpha-Al2O3 coatings introduced by post-deposition blasting treatments using synchrotron X-ray nanodiffraction

    Tkadletz, M., Keckes, J., Schalk, N., Krajinovic, I., Czettl, C. & Mitterer, C., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  31. Published

    Mechanical property enhancement in laminates through control of morphology and crystal orientation

    Zeilinger, A., Daniel, R., Stefenelli, M., Sartory, B., Chitu, L., Burghammer, M., Schöberl, T., Kolednik, O., Keckes, J. & Mitterer, C., 2015, In: Journal of physics / D, Applied physics. 48, p. 2953031-2953039

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Microstructural design: a successful strategy for fracture toughness enhancement of hard coatings

    Daniel, R., Zalesak, J., Mitterer, C., Sartory, B., Meindlhumer, M. & Keckes, J., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  33. Published

    Microstructure-controlled depth gradients of mechanical properties in thin nanocrystalline films: Towards structure-property gradient functionalization

    Daniel, R., Zeilinger, A., Schöberl, T., Sartory, B., Mitterer, C. & Keckes, J., 2015, In: Journal of applied physics. 117, 23, p. 235301-1-235301-12

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Pencil-beam X-ray nanodiffraction on CVD α-Al2O3 hard coatings with grain sizes in the micrometer range

    Tkadletz, M., Keckes, J., Schalk, N., Czettl, C. & Mitterer, C., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  35. Published

    Recent progress in advanced characterization methods for the development of hard coatings: From improved composition/microstructure/property relations to insights in degradation behavior

    Mitterer, C., Mühlbacher, M., Zeilinger, A., Stefenelli, M., Daniel, R., Tkadletz, M., Schalk, N., Sartory, B. & Keckes, J., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  36. Published

    Residual stress gradients in alpha-Al2O3 hard coatings determined by pencil-beam X-ray nanodiffraction: The influence of blasting media

    Tkadletz, M., Keckes, J., Schalk, N., Krajinovic, I., Burghammer, M., Czettl, C. & Mitterer, C., 2015, In: Surface & coatings technology. 262, p. 134-140 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Resolving depth evolution of microstructure and hardness in sputtered CrN film

    Zeilinger, A., Daniel, R., Schöberl, T., Stefenelli, M., Sartory, B., Keckes, J. & Mitterer, C., 2015, In: Thin solid films. 581.2015, April, p. 75-79

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Software Package to evaluate two-dimensional X-ray nanodiffraction data from thin films

    Keckes, J., Stefenelli, M., Todt, J., Mitterer, C., Daniel, R. & Keckes, J., 2015.

    Research output: Contribution to conference › Poster › Research › peer-review

  39. Published

    X-ray nanodiffraction reveals stress distribution across an indented multilayered CrN-Cr thin film

    Steffenelli, M., Daniel, R., Ecker, W., Kiener, D., Todt, J., Zeilinger, A., Mitterer, C., Burghammer, M. & Keckes, J., 2015, In: Acta materialia. 85, p. 24-31

    Research output: Contribution to journal › Article › Research › peer-review

  40. 2014
  41. Published

    Mono-textured nanocrystalline thin films with pronounced stress-gradients: On the role of grain boundaries in the stress evolution

    Daniel, R., Jäger, E., Todt, J., Sartory, B., Mitterer, C. & Keckes, J., 28 May 2014, In: Journal of applied physics. 115, 20, 203507.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Macroscopic fracture behaviour of CrN hard coatings evaluated by X-ray diffraction coupled with four-point bending

    Stefenelli, M., Riedl, A., Todt, J., Bartosik, M., Daniel, R., Mitterer, C. & Keckes, J., 1 Jan 2014, Materials Science Forum. Vol. 768-769. p. 272-279 8 p. (Materials Science Forum; vol. 768-769).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  43. Published

    A combinatorial X-ray sub-micron diffraction study of microstructure, residual stress and phase stability in TiAlN coatings

    Riedl, A., Daniel, R., Todt, J., Steffenelli, M., Holec, D., Sartory, B., Krywka, C., Müller, M., Mitterer, C. & Keckes, J., 2014, In: Surface & coatings technology. 257, p. 108-113

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    A new method for polychromatic X-ray μLaue diffraction on a Cu pillar using an energy-dispersive pn-junction charge-coupled device

    Abboud, A., Kirchlechner, C., Send, S., Micha, J. S., Ulrich, O., Pashniak, N., Strüder, L. W. J., Keckes, J. & Pietsch, U., 2014, In: Review of scientific instruments. 85, p. 1139011-1139018

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Controlled functionality of thin films through advanced microstructural design

    Daniel, R., Mitterer, C. & Keckes, J., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  46. Published

    Cu diffusion into single-crystalline TiN studied by transmission electron microscopy and atom probe tomography

    Mühlbacher, M., Mendez Martin, F., Sartory, B., Schalk, N., Keckes, J., Lu, J., Hultman, L. & Mitterer, C., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  47. Published

    Diffusion studies in epitaxial TiN/Cu layers on MgO(001) by high resolution TEM and APT

    Mühlbacher, M., Mendez Martin, F., Sartory, B., Schalk, N., Keckes, J., Lu, J., Hultman, L. & Mitterer, C., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  48. Published

    Fracture toughness enhancement of thin films by advanced microstructural design and architecture - Examples of bio-inspired model soft-hard crystalline-amorphous coating systems

    Daniel, R., Mitterer, C. & Keckes, J., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  49. Published

    Humidity-driven deformation of ordered mesoporous silica films

    Sharifi Rajabi, P., Marmiroli, B., Sartori, B., Cacho-Nerin, F., Keckes, J., Amenitsch, H. & Paris, O., 2014, In: Bioinspired, Biomimetic and Nanobiomaterials. 3, p. 183-190

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Investigation of the origin of compressive residual stress in CVD TiB2 hard coatings using synchrotron X-ray nanodiffraction

    Schalk, N., Keckes, J., Czettl, C., Burghammer, M., Penoy, M., Michotte, C. & Mitterer, C., 2014, In: Surface & coatings technology. 258, p. 121-126

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Macroscopic elastic properties of textured ZrN-AlN polycrystalline aggregates: From ab initio calculations to grain-scale interactions

    Holec, D., Tasnádi, F., Wagner, P., Friak, M., Neugebauer, J., Mayrhofer, P. H. & Keckes, J., 2014, In: Physical review : B, Condensed matter and materials physics. 90, p. 184106-1-184106-9

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Microstructural and stress design of thin films - The journey from nitrides to oxides, from nanocrystalline to amorphous materials

    Daniel, R., Mitterer, C. & Keckes, J., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  53. Published

    Microstructure-related depth-gradients of mechanical properties in thin nanocrystalline films

    Daniel, R., Zalesak, J., Mitterer, C., Riedl, A., Sartory, B., Keckes, J. & Schöberl, T., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  54. Published

    New insights into single-grain mechanical behavior from temperature-dependent 3-D coherent X-ray diffraction

    Vaxelaire, N., Labat, S., Cornelius, T., Kirchlechner, C., Keckes, J., Schülli, T. & Thomas, O., 2014, In: Acta materialia. 78, p. 46-55

    Research output: Contribution to journal › Article › Research › peer-review

  55. Published

    Radial crystalline texture in a lyocell fibre revealed by synchrotron nanofocus wide-angle X-ray scattering

    Gindl-Altmutter, W., Eichhorn, S. J., Burghammer, M. C. & Keckes, J., 2014, In: Cellulose. p. 845-851

    Research output: Contribution to journal › Article › Research › peer-review

  56. Published

    Sample tilt-free characterization of residual stress gradients in thin coatings using an in-plane arm-equipped laboratory X-ray diffractometer

    Benediktovitch, A. I., Ulyanenkova, T., Keckes, J. & Ulyanenkov, A. P., 2014, In: Journal of applied crystallography. p. 1931-938

    Research output: Contribution to journal › Article › Research › peer-review

  57. Published

    Sputtered molybdenum films: structure and property evolution with film thickness

    Hofer, A. M., Schlacher, J., Keckes, J., Winkler, J. & Mitterer, C., 2014, In: Vacuum. 99, p. 149-152

    Research output: Contribution to journal › Article › Research › peer-review

  58. Published

    Strategies for fracture toughness enhancement of thin films by advanced microstructural design - Examples of bio-inspired model soft-hard crystalline -amorphous coatings systems

    Daniel, R., Mitterer, C. & Keckes, J., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  59. Published

    Superior oxidation resistance, mechanical properties and residual stresses of an Al-rich nanolamellar Ti0.05Al0.95N coating prepared by CVD

    Todt, J., Pitonak, R., Köpf, A., Weißenbacher, R., Sartory, B., Burghammer, M., Daniel, R., Schöberl, T. & Keckes, J., 2014, In: Surface & coatings technology. 258.2014, November, p. 1119-1127

    Research output: Contribution to journal › Article › Research › peer-review

  60. Published

    Virtual process design for highly reliable cold formed components

    Schratter, S., Keckes, J. & Buchmayr, B., 2014,

    International Science & Technology Congress OMD 2014

    .     p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  61. 2013
  62. Published

    Advanced cross-sectional characterization of hard coatings

    Tkadletz, M., Mitterer, C., Keckes, J., Rebelo De Figueiredo, M., Hosemann, P., Burghammer, M., Sartory, B. & Czettl, C., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  63. Published

    Bias- and temperature-dependent strain evolution across nanocrystalline TiAlN films studied by X-ray nanodiffraction

    Riedl, A., Todt, J., Daniel, R., Steffenelli, M., Holec, D., Krywka, C., Mitterer, C. & Keckes, J., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  64. Published

    Cross-sectional X-ray nanobeam diffraction analysis of a compositionally graded CrNx thin film

    Bartosik, M., Daniel, R., Mitterer, C., Matko, I., Burghammer, M., Mayrhofer, P. H. & Keckes, J., 2013, In: Thin solid films. 542, p. 1-4

    Research output: Contribution to journal › Article › Research › peer-review

  65. Published

    Diffusion studies in epitaxial TiN/Cu layers on MgO(001)

    Mühlbacher, M., Sartory, B., Keckes, J., Lu, J., Hultman, L. & Mitterer, C., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  66. Published

    Effects of structure and interfaces on fracture toughness of CrN/AlN multilayer coatings

    Schlögl, M., Kirchlechner, C., Paulitsch, J., Keckes, J. & Mayrhofer, P., 2013, In: Scripta materialia. 68, p. 917-920

    Research output: Contribution to journal › Article › Research › peer-review

  67. Published

    Influence of AlN layers on mechanical properties and thermal stability of Cr-based nitride coatings

    Schlögl, M., Paulitsch, J., Keckes, J. & Mayrhofer, P. H., 2013, In: Thin solid films. 531, p. 113-118

    Research output: Contribution to journal › Article › Research › peer-review

  68. Published

    Interfacial and inter- diffusion studies of epitaxial TiN/Cu layers on MgO (001) - A comprehensive approach by high resolution TEM and APT

    Mühlbacher, M., Mendez Martin, F., Sartory, B., Keckes, J., Lu, J., Lars, H. & Mitterer, C., 2013.

    Research output: Contribution to conference › Presentation › Research › peer-review

  69. Published

    Novel TiAlN nanostructured CVD coatings with superior oxidation resistance

    Keckes, J., Todt, J., Daniel, R., Mitterer, C., Köpf, A., Weißenbacher, R. & Pitonak, R., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  70. Published

    Origins of microstructure and stress gradients in nanocrystalline thin films: The role of growth parameters and self-organization

    Daniel, R., Keckes, J., Matko, I., Burghammer, M. & Mitterer, C., 2013, In: Acta materialia. 61, p. 6255-6266

    Research output: Contribution to journal › Article › Research › peer-review

  71. Published

    Self-organized periodic soft-hard nanolamellae in polycrystalline TiAlN thin films

    Keckes, J., Daniel, R., Mitterer, C., Matko, I., Sartory, B., Köpf, A., Weißenbacher, R. & Pitonak, R., 2013, In: Thin solid films. 545, p. 29-32

    Research output: Contribution to journal › Article › Research › peer-review

  72. Published

    Triaxial Residual Stresses in Thermomechanically Rolled Seamless Tubes characterized by High-Energy Synchrotron X-Ray diffraction

    Winter, G., Stefenelli, M., Klarner, J., Staron, P., Fischer, T., Keckes, J. & Buchmayr, B., 2013,

    Proceedings of the2013 ASME Pressure Vessels & Piping Conference

    .     p. 1-5

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  73. Published

    X-ray analysis of residual stress gradients in TiN coatings by a Laplace space approach and cross-sectional nanodiffraction: a critical comparison

    Steffenelli, M., Todt, J., Riedl, A., Ecker, W., Müller, T., Daniel, R., Burghammer, M. & Keckes, J., 2013, In: Journal of applied crystallography. 46, p. 1-8

    Research output: Contribution to journal › Article › Research › peer-review

  74. 2012
  75. Published

    All-cellulose composites prepared from flax and lyocell fibres compared to epoxy–matrix composites

    Gindl-Altmutter, W., Keckes, J., Plackner, J., Liebner, F., Englund, K. & Laborie, M.-P., 2012, In: Composites science and technology. p. 1304-1309

    Research output: Contribution to journal › Article › Research › peer-review

  76. Published

    A novel approach for determining fracture toughness of hard coatings on the micrometer scale

    Riedl, A., Daniel, R., Steffenelli, M., Schöberl, T., Kolednik, O., Mitterer, C. & Keckes, J., 2012, In: Scripta materialia. 67, p. 708-711

    Research output: Contribution to journal › Article › Research › peer-review

  77. Published

    A two-dimensional waveguide beam for X-ray nanodiffraction

    Krywka, C., Neubauer, H., Priebe, M., Salditt, T., Keckes, J., Buffet, A., Roth, S. V., Doehrmann, R. & Mueller, M., 2012, In: Journal of applied crystallography. 45.20212 , Part 1, p. 85-92 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  78. Published

    Biomimetik design for cell-contacting surfaces-The topographical influences on cell-biomaterial interaction and plasma-based fabrication methods for self-adapted nanostructures

    Lackner, J. M., Waldhauser, W., Schmied, F., Teichert, C., Keckes, J. & Kreith, J., 2012, Nanostructural materials for implants and cardiovascular biomedical devices. p. 33-66

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  79. Published

    Expected and unexpected plastic behavior at the micron scale: An in situ μLaue tensile study

    Kirchlechner, C., Imrich, P., Grosinger, W., Kapp, M., Keckes, J., Micha, J.-S., Ulrich, O., Thomas, O., Labat, S., Motz, C. & Dehm, G., 2012, In: Acta materialia. 60, p. 1252-1258

    Research output: Contribution to journal › Article › Research › peer-review

  80. Published

    Influence of residual stresses and grain size on the spinodal decomposition of metastable Ti1-xAlxN coatings

    Schalk, N., Mitterer, C., Keckes, J., Penoy, M. & Michotte, C., 2012, In: Surface & coatings technology. 209, p. 190-196

    Research output: Contribution to journal › Article › Research › peer-review

  81. Published

    Investigation of reversible plasticity in a micron-sized, single crystalline copper bending beam by X-ray µLaue diffraction

    Kirchlechner, C., Grosinger, W., Kapp, M. W., Imrich, P. J., Micha, J.-S., Ulrich, O., Keckes, J., Dehm, G. & Motz, C., 2012, In: Philosophical magazine. p. 3231-3242

    Research output: Contribution to journal › Article › Research › peer-review

  82. Published

    Lateral gradients of phases, residual stress and hardness in a laser heated Ti0.52Al0.48N coating on hard metal

    Bartosik, M., Daniel, R., Zhang, Z., Deluca, M., Ecker, W., Steffenelli, M., Klaus, M., Genzel, C., Stefenelli, M., Mitterer, C. & Keckes, J., 2012, In: Surface & coatings technology. 206, p. 4502-4510 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  83. Published

    Quantum mechanically guided design of Co43Fe20Ta5.5X31.5 (X=B, Si, P, S) metallic glasses

    Hostert, C., Music, D., Bednarcik, J., Keckes, J. & Schneider, J. M., 2012, In: Journal of physics (Condensed matter). p. 175402-175411

    Research output: Contribution to journal › Article › Research › peer-review

  84. Published

    Structure related stress gradients in thin nanocrystalline films revealed by X-ray nanodiffraction

    Daniel, R., Keckes, J. & Mitterer, C., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  85. Published

    Thermally treated hard coatings characterized by XRD coupled with four-point bending

    Steffenelli, M., Riedl, A., Bartosik, M., Daniel, R., Mitterer, C. & Keckes, J., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  86. Published

    The structure and mechanical properties of spines from the cactus Opuntia ficus-indica

    Gindl-Altmutter, W. & Keckes, J., 2012, In: BioResources. 7, 1, p. 1232-1237

    Research output: Contribution to journal › Article › Research › peer-review

  87. Published

    TiO2 (100) Al2O3 (0001) interface: A first-principles study supported by experiment

    Popov, M., Spitaler, J., Mühlbacher, M., Walter, C., Keckes, J., Mitterer, C. & Draxl, C., 2012, In: Physical review : B, Condensed matter and materials physics. 86, p. 2053091-20530913

    Research output: Contribution to journal › Article › Research › peer-review

  88. Published

    X-ray nanodiffraction reveals strain and microstructure evolution in nanocrystalline thin films

    Keckes, J., Bartosik, M., Daniel, R., Mitterer, C., Maier, G. A., Ecker, W., Vila-Comamala, J., David, C., Schoeder, S. & Burghammer, M., 2012, In: Scripta materialia. 67, p. 748-751

    Research output: Contribution to journal › Article › Research › peer-review

  89. 2011
  90. Published

    Ab initio molecular dynamics model for density, elastic properties and short range order of Co–Fe–Ta–B metallic glass thin films

    Hostert, C., Music, D., Bednarcik, J., Keckes, J., Kapaklis, V., Hjövarsson, B. & Schneider, J. M., 2011, In: European physical journal B, Condensed matter physics : EPJ B. p. 4754011-4754017

    Research output: Contribution to journal › Article › Research › peer-review

  91. Published

    Cellulose nanofibrils as filler for adhesives: effect on specific fracture energy of solid wood-adhesive bonds

    Veigel, S., Müller, U., Keckes, J., Obersriebnig, E. M. & Gindl-Altmutter, W., 2011, In: Cellulose. p. 1227-1237

    Research output: Contribution to journal › Article › Research › peer-review

  92. Published

    Decomposition pathways in age hardening of Ti-Al-N films

    Rachbauer, R., Massl, S., Stergar, E., Holec, D., Kiener, D., Keckes, J., Patscheider, J., Stiefel, M., Leitner, H. & Mayrhofer, P. H., 2011, In: Journal of applied physics. 110, p. 023515-1-023515-10

    Research output: Contribution to journal › Article › Research › peer-review

  93. Published

    Dislocation storage in single slip oriented Cu micro-tensile samples: New insights by X-ray microdiffraction

    Kirchlechner, C., Kiener, D., Motz, C., Labat, S., Vaxelaire, N., Perroud, O., Micha, J.-S., Ulrich, O., Thomas, O., Dehm, G. & Keckes, J., 2011, In: Philosophical magazine. 91, p. 1256-1264

    Research output: Contribution to journal › Article › Research › peer-review

  94. Published

    Impact of instrumental constraints and imperfections on the dislocation structure in micron-sized Cu compression pillars

    Kirchlechner, C., Keckes, J., Motz, C., Grosinger, W., Kapp, M. W., Micha, J.-S., Ulrich, O. & Dehm, G., 2011, In: Acta materialia. 59, p. 5618-5626

    Research output: Contribution to journal › Article › Research › peer-review

  95. Published

    In Situ High Temperature X-Ray Diffraction Reveals Residual Stress Depth-Profiles in Blasted TiN Hard Coatings

    Bartosik, M., Pitonak, R. & Keckes, J., 2011, In: Advanced engineering materials. p. 705-711

    Research output: Contribution to journal › Article › Research › peer-review

  96. Published

    In situ µLaue: Instrumental setup for the deformation of micron sized samples

    Kirchlechner, C., Keckes, J., Micha, J.-S. & Dehm, G., 2011, In: Advanced engineering materials. 13, p. 837-844

    Research output: Contribution to journal › Article › Research › peer-review

  97. Published

    Local structure around nano-clay agglomerates in PP composites – a scanning X-Ray diffraction study with sub micron resolution

    Feuchter, M., Maier, G. A., Burghammer, M., Kracalik, M., Laske, S., Keckes, J. & Pinter, G., 2011, European Polymer Congress 2011. p. 515-515

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  98. Published

    Nano-Beam X-ray Diffraction as a Tool to Characterize Gradients of Microstructure and Residual Stress in Nanocrystalline Hard Coatings

    Bartosik, M., Daniel, R., Mitterer, C., Schoeder, S., Burghammer, M. & Keckes, J., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  99. Published

    Nano-beam-x-ray diffraction reveals strain, composition, texture and crystal size gradients across nano-crystalline thin films

    Keckes, J., Daniel, R., Bartosik, M., Mitterer, C., Schoeder, S. & Burghammer, M., 2011, Proceeding of International Conference on Metallurgical Coatings and Thin Films. p. 55-55

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  100. Published

    Polymers characterized using in-situ laboratory saxs/waxs coupled with mechanical tests

    Feuchter, M., Keckes, J. & Maier, G. A., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  101. Published

    Size effect of thermal expansion and thermal/intrinsic stresses in nanostructured thin films: Experiment and model

    Daniel, R., Holec, D., Bartosik, M., Keckes, J. & Mitterer, C., 2011, In: Acta materialia. 59, p. 6631-6645

    Research output: Contribution to journal › Article › Research › peer-review

  102. Published

    Stress design of hard coatings

    Daniel, R., Keckes, J. & Mitterer, C., 2011, Proceeding of International Conference on Metallurgical Coatings and Thin Films. p. 55-55

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  103. Published

    Temperature induced structural gradients in multilayer coatings revealed by position resolved XRR and GISAXS

    Maier, G., Kreith, J., Chitu, L., Siffalovic, P., Michaelsen, C. & Keckes, J., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  104. Published

    µLaue: Compression studies on miniaturised Copper single crystals

    Kirchlechner, C., Kapp, M., Motz, C., Grosinger, W., Keckes, J., Micha, J.-S., Ulrich, O. & Dehm, G., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  105. 2010
  106. Published

    3D strain imaging in sub-micrometer crystals using cross-reciprocal space measurements: Numerical feasibility and experimental methodology

    Vaxelaire, N., Labat, S., Chamard, V., Thomas, O., Jaques, V., Picca, F., Ravy, S., Kirchlechner, C. & Keckes, J., 2010, In: Nuclear instruments & methods in physics research / B Beam interactions with materials and atoms. p. 388-393

    Research output: Contribution to journal › Article › Research › peer-review

  107. Published

    Development of intrinsic and thermal components of residual stress in nanostructured thin films: Grain size dependent phenomena

    Daniel, R., Keckes, J. & Mitterer, C., 2010, Proceedings 8th European Conference on Residual Stresses. p. 15-15

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Previous 1 2 3 4 Next
View graph of relations

Latest Research Output

View more (318)