Surface & coatings technology, ‎0257-8972

Journal

ISSNs0257-8972
Additional searchable ISSN (electronic)0257-8972

Research output

  1. Article › Research › Peer-reviewed
  2. Published

    3D versus 2D finite element simulation of the effect of surface roughness on nanoindentation of hard coatings

    Walter, C. & Mitterer, C., 2009, In: Surface & coatings technology. 203, p. 3286-3290

    Research output: Contribution to journalArticleResearchpeer-review

  3. Published

    A combinatorial X-ray sub-micron diffraction study of microstructure, residual stress and phase stability in TiAlN coatings

    Riedl, A., Daniel, R., Todt, J., Steffenelli, M., Holec, D., Sartory, B., Krywka, C., Müller, M., Mitterer, C. & Keckes, J., 2014, In: Surface & coatings technology. 257, p. 108-113

    Research output: Contribution to journalArticleResearchpeer-review

  4. Published

    A comparative study on Ti1-xAlxN coatings reactively sputtered from compound and from mosaic targets

    Schalk, N., Weirather, T., Polzer, C., Polcik, P. & Mitterer, C., 2011, In: Surface & coatings technology. 205, p. 4705-4710

    Research output: Contribution to journalArticleResearchpeer-review

  5. Published

    A new low friction concept for Ti1-xAlxN based coatings in high temperature applications

    Kutschej, K., Mayrhofer, P. H., Mitterer, C., Polcik, P. & Kathrein, M., 2004, In: Surface & coatings technology. 188-189, p. 358-363

    Research output: Contribution to journalArticleResearchpeer-review

  6. Published

    Advanced characterization methods for wear resistant hard coatings: A review on recent progress

    Tkadletz, M., Schalk, N., Daniel, R., Keckes, J., Czettl, C. & Mitterer, C., 2016, In: Surface & coatings technology. 285, p. 31-46 16 p.

    Research output: Contribution to journalArticleResearchpeer-review

  7. Published

    Al-rich cubic Al0.8Ti0.2N coating with self-organized nano-lamellar microstructure: Thermal and mechanical properties

    Todt, J., Zalesak, J., Daniel, R., Pitonak, R., Köpf, A., Weißenbacher, R., Sartory, B., Mitterer, C. & Keckes, J., 2016, In: Surface & coatings technology. 291, p. 89-93 5 p.

    Research output: Contribution to journalArticleResearchpeer-review

  8. E-pub ahead of print

    Angular-dependent deposition of MoNbTaVW HEA thin films by three different physical vapor deposition methods

    Xia, A., Togni, A., Hirn, S., Bolelli, G., Lusvarghi, L. & Franz, R., 17 Jan 2020, (E-pub ahead of print) In: Surface & coatings technology. 385.2020, March, 8 p., 125356.

    Research output: Contribution to journalArticleResearchpeer-review

  9. E-pub ahead of print

    Annealing effects on the film stress and adhesion of tungsten-titanium barrier layers

    Kleinbichler, A., Todt, J., Zechner, J., Wöhlert, S., Többens, D. & Cordill, M., 18 Sept 2017, (E-pub ahead of print) In: Surface & coatings technology. 332.2017, 25 December, p. 376-381 6 p.

    Research output: Contribution to journalArticleResearchpeer-review

  10. Published
  11. Published

    Atom probe specimen preparation and 3D interfacial study of Ti-Al-N thin films

    Rachbauer, R., Massl, S., Stergar, E., Felfer, P. & Mayrhofer, P. H., 2010, In: Surface & coatings technology. 204, p. 1811-1816

    Research output: Contribution to journalArticleResearchpeer-review

  12. E-pub ahead of print

    Atomic scale investigations of thermally treated nano-structured Ti-Al-N/Mo-Si-B multilayers

    Aschauer, E., Sackl, S. C., Schachinger, T., Bolvardi, H., Arndt, M., Polcik, P., Riedl, H. & Mayrhofer, P. H., 18 Jun 2018, (E-pub ahead of print) In: Surface & coatings technology. 349.2018, September, p. 480-487 8 p.

    Research output: Contribution to journalArticleResearchpeer-review

  13. Published

    C2H6 as precursor for low pressure chemical vapor deposition of TiCNB hard coatings

    Czettl, C., Mitterer, C., Penoy, M., Michotte, C. & Kathrein, M., 2013, In: Surface & coatings technology. 215, p. 127-132

    Research output: Contribution to journalArticleResearchpeer-review

  14. Published

    CO addition in low-pressure chemical vapour deposition of medium-temperature TiCxN1-x based hard coatings

    Czettl, C., Mitterer, C., Mühle, U., Rafaja, D., Puchner, S., Hutter, H., Penoy, M., Michotte, C. & Kathrein, M., 2011, In: Surface & coatings technology. 206, p. 1691-1697

    Research output: Contribution to journalArticleResearchpeer-review

  15. Published

    Calorimetric evidence for frictional self-adaptation of TiAlN/VN superlattice coatings

    Mayrhofer, P. H., Hovsepian, P. E., Mitterer, C. & Münz, W-D., 2004, In: Surface & coatings technology. 177-178, p. 341-347

    Research output: Contribution to journalArticleResearchpeer-review

  16. Published

    Carbon doped alpha-Al2O3 coatings grown by chemical vapor deposition

    Hochauer, D., Mitterer, C., Penoy, M., Puchner, S., Michotte, C., Martinz, H. P., Hutter, H. & Kathrein, M., 2012, In: Surface & coatings technology. 206, p. 4771-4777

    Research output: Contribution to journalArticleResearchpeer-review

  17. Published

    Cathode spot behavior in nitrogen and oxygen gaseous atmospheres and concomitant cathode surface modifications

    Golizadeh Najafabadi, M., Mendez Martin, F., Kolozsvári, S., Anders, A. & Franz, R., 15 Sept 2021, In: Surface & coatings technology. 421.2021, 15 September, 7 p.

    Research output: Contribution to journalArticleResearchpeer-review

  18. Published

    Cathodic arc deposition of (Al,Cr)2O3: Macroparticles and cathode surface modifications

    Pohler, M., Franz, R., Ramm, J., Polic, P. & Mitterer, C., 2011, In: Surface & coatings technology. 206, p. 1454-1460

    Research output: Contribution to journalArticleResearchpeer-review

  19. Published

    Combined TEM and XPS studies of metal - polymer interfaces for space applications

    Putz, B., Milassin, G., Butenko, Y., Völker, B., Gammer, C., Semprimoschnig, C. & Cordill, M., 18 Sept 2017, In: Surface & coatings technology. 332.2017, 25 December, p. 368-375 6 p.

    Research output: Contribution to journalArticleResearchpeer-review

  20. Published

    Comparative study of Ti1-xAlxN coatings alloyed with Hf, Nb, and B

    Kutschej, K., Fateh, N., Mayrhofer, P., Kathrein, M., Polcik, P. & Mitterer, C., 2005, In: Surface & coatings technology. 200, p. 113-117

    Research output: Contribution to journalArticleResearchpeer-review

  21. Published

    Composition, microstructure and mechanical properties of boron containing multilayer coatings for hot forming tools

    Paschke, H., Stüber, M., Ziebert, C., Bistron, M. & Mayrhofer, P. H., 2011, In: Surface & coatings technology. 205, p. 24-28

    Research output: Contribution to journalArticleResearchpeer-review

  22. Published

    Correlating high temperature mechanical and tribological properties of CrAlN and CrAlSiN hard coatings

    Drnovšek, A., Vo, H., Xia, A., Vachhani, S. J., Kolozsvári, S., Hosemann, P., Franz, R. & Rebelo de Figueiredo, M., 17 May 2019, In: Surface & coatings technology. 372.2019, August, p. 361-368 8 p.

    Research output: Contribution to journalArticleResearchpeer-review

  23. Published

    Correlation between fracture characteristics and valence electron concentration of sputtered Hf-C-N based thin films

    Glechner, T., Lang, S., Hahn, R., Alfreider, M., Moraes, V., Primetzhofer, D., Ramm, J., Kolozsvári, S., Kiener, D. & Riedl, H., 19 Jul 2020, In: Surface and Coatings Technology. 399.2020, 15 October, 8 p., 126212.

    Research output: Contribution to journalArticleResearchpeer-review

  24. Published

    Correlative microstructure and topography informed nanoindentation of copper films

    Bigl, S., Schöberl, T., Wurster, S., Cordill, M. & Kiener, D., 25 Dec 2016, In: Surface & coatings technology. 308.2016, 25 December, p. 404-413 10 p.

    Research output: Contribution to journalArticleResearchpeer-review

  25. Published

    Crossover of texture and morphylogy in (Ti1-xAlx)1 - yYyN alloy films and the pathway of structure evolution

    Szekely, L., Safran, G., Kis, V., Horvat, Z. E., Mayrhofer, P. H., Moser, M., Radnoczi, G., Misjak, F. & Barna, P. B., 2014, In: Surface & coatings technology. 257, p. 3-14

    Research output: Contribution to journalArticleResearchpeer-review

  26. Published

    Crystallographic aspects related to advanced tribological multilayers of Cr/CrN and Ti/TiN types produced by pulsed laser deposition (PLD)

    Major, L., Morgiel, J., Major, B., Lackner, J. M., Waldhauser, W., Ebner, R., Nistor, L. & Van Tendeloo, G., 2006, In: Surface & coatings technology. 200, p. 6190-6195

    Research output: Contribution to journalArticleResearchpeer-review

  27. Published

    Cyclic heat-up and damage-relevant substrate plastification of single- and bilayer coated milling inserts evaluated numerically

    Nemetz, A., Daves, W., Klünsner, T., Ecker, W., Schäfer, J., Czettl, C. & Antretter, T., 2019, In: Surface & coatings technology. 360.2019, February, p. 39-49 11 p.

    Research output: Contribution to journalArticleResearchpeer-review

  28. Published

    Duplex processing for increased adhesion of sputter deposited Ti1-xAlxN coatings on a Fe-25%Co-15%Mo tool material

    Weirather, T., Fian, A., Sartory, B., Caliskanoglu, D., Kölker, W. & Mitterer, C., 2012, In: Surface & coatings technology. 206, p. 3601-3606

    Research output: Contribution to journalArticleResearchpeer-review

  29. Published

    Effect of Hf on structure and age hardening of Ti-Al-N thin films

    Rachbauer, R., Blutmager, A., Holec, D. & Mayrhofer, P. H., 2012, In: Surface & coatings technology. 206, p. 2667-2672

    Research output: Contribution to journalArticleResearchpeer-review

  30. Published

    Effect of nitrogen-incorporation on structure, properties and performance of magnetron sputtered CrB2

    Budna, K., Mayrhofer, P. H., Neidhardt, J., Hegedus, E., Kovacs, I., Toth, L., Pecz, B. & Mitterer, C., 2008, In: Surface & coatings technology. 202, p. 3088-3093

    Research output: Contribution to journalArticleResearchpeer-review

  31. Published

    Effects of reference materials on texture coefficients determined for a CVD α-Al2O3 coating

    Stylianou, R. P., Tkadletz, M., Schalk, N., Penoy, M., Czettl, C. & Mitterer, C., 15 Feb 2019, In: Surface & coatings technology. 359.2019, February, p. 314-322 9 p.

    Research output: Contribution to journalArticleResearchpeer-review

  32. E-pub ahead of print

    Electrochemical deposition of hydroxyapatite on beta-Ti-40Nb

    Schmidt, R., Hoffmann, V., Helth, A., Gostin, P. F., Calin, M., Eckert, J. & Gebert, A., 26 Mar 2016, (E-pub ahead of print) In: Surface & coatings technology. 294.2016, 25 May, p. 186-193 8 p.

    Research output: Contribution to journalArticleResearchpeer-review

  33. Published

    Element- and charge-state-resolved ion energies in the cathodic arc plasma from composite AlCr cathodes in argon, nitrogen and oxygen atmospheres

    Franz, R., Polcik, P. & Anders, A., 2015, In: Surface & coatings technology. 272, p. 309-321

    Research output: Contribution to journalArticleResearchpeer-review

  34. Published

    Energy consumption and material fluxes in hard coating deposition processes

    Gassner, M., Rebelo De Figueiredo, M., Schalk, N., Franz, R., Weiß, C., Rudigier, H., Holzschuh, H., Bürgin, W., Pohler, M., Czettl, C. & Mitterer, C., 2016, In: Surface & coatings technology. 299, p. 49-55 7 p.

    Research output: Contribution to journalArticleResearchpeer-review

  35. E-pub ahead of print

    Evolution of microstructure and mechanical properties of a grades TiAlON thin film investigated by cross-sectional characterization techniques

    Schalk, N., Tkadletz, M., Terziyska, V., Deluca, M., Letofsky-Papst, I., Keckes, J. & Mitterer, C., 14 Dec 2018, (E-pub ahead of print) In: Surface & coatings technology. 315.2019, February, p. 155-161 7 p.

    Research output: Contribution to journalArticleResearchpeer-review

  36. Published

    Evolution of structure, residual stress, thermal stability and wear resistance of nanocrystalline multilayered Al0.7Cr0.3N-Al0.67Ti0.33N coatings

    Spor, S., Jäger, N., Meindlhumer, M., Hruby, H., Burghammer, M., Nahif, F., Mitterer, C., Keckes, J. & Daniel, R., 2021, In: Surface & coatings technology. 425.2021, 15 November, 9 p., 127712.

    Research output: Contribution to journalArticleResearchpeer-review

  37. Published

    Evolution of the fracture properties of arc evaporated Ti1-xAlxN coatings with increasing Al content

    Waldl, H., Tkadletz, M., Lechner, A., Czettl, C., Pohler, M. & Schalk, N., 16 Jul 2022, In: Surface & coatings technology. 444.2022, 25 August, 6 p., 128690.

    Research output: Contribution to journalArticleResearchpeer-review

  38. E-pub ahead of print

    Evolution of the microstructure of sputter deposited TaAlON thin films with increasing oxygen partial pressure

    Schalk, N., Saringer, C., Fian, A., Terziyska, V., Julin, J. & Tkadletz, M., 29 Apr 2021, (E-pub ahead of print) In: Surface & coatings technology. 418.2021, 25. July, 7 p., 127237.

    Research output: Contribution to journalArticleResearchpeer-review

  39. Published

    Evolution of the thermal conductivity of arc evaporated fcc-Ti1-x-yAlxTayN coatings with increasing Ta content

    Waldl, H., Tkadletz, M., Winkler, M., Großmann, B., Czettl, C., Pohler, M. & Schalk, N., 25 Jan 2021, In: Surface & coatings technology. 2021, 406, 6 p., 126658.

    Research output: Contribution to journalArticleResearchpeer-review

  40. Published

    Extraordinary high-temperature behavior of electrically conductive Hf7B23Si22C6N40 ceramic film

    Zeman, P., Zuzjaková, Čerstvý, R., Houška, J., Shen, Y., Todt, J., Jiang, J., Daniel, R., Keckes, J., Meletis, E. I. & Vlček, J., 15 Jun 2020, In: Surface and Coatings Technology. 391.2020, 15 June, 8 p., 125686.

    Research output: Contribution to journalArticleResearchpeer-review

  41. Published
  42. Published

    Finite element study of the influence of hard coatings on hard metal tool loading during milling

    Krajinovic, I., Daves, W., Tkadletz, M., Teppernegg, T., Klünsner, T., Schalk, N., Mitterer, C., Tritremmel, C., Ecker, W. & Czettl, C., 2016, In: Surface & coatings technology. 304, p. 134-141 8 p.

    Research output: Contribution to journalArticleResearchpeer-review

  43. Published

    Grain refinement effect on the Ti-45Nb alloy electrochemical behavior in simulated physiological solution

    Cvijović-Alagić, I., Laketić, S., Bajat, J., Hohenwarter, A. & Rakin, M., 15 Oct 2021, In: Surface and Coatings Technology. 423.2021, 15 October, 9 p., 127609.

    Research output: Contribution to journalArticleResearchpeer-review

  44. Published

    Hard and superhard TiAlBN coatings deposited by twin electron-beam evaporation

    Rebholz, C., Monclus, M. A., Baker, M. A., Mayrhofer, P. H., Gibson, P. N., Leyland, A. & Matthews, A., 2007, In: Surface & coatings technology. 13, p. 6078-6083

    Research output: Contribution to journalArticleResearchpeer-review

  45. Published

    High temperature fracture toughness of single-layer CrAlN and CrAlSiN hard coatings

    Drnovsek, A., Vo, H., Rebelo de Figueiredo, M., Kolozsvári, S., Hosemann, P. & Franz, R., 15 Mar 2021, In: Surface & coatings technology. 409.2021, 15 March, 7 p., 126909.

    Research output: Contribution to journalArticleResearchpeer-review

  46. Published

    High-temperature oxidation resistance of Ta-Si-N films with a high Si content

    Zeman, P., Musil, J. & Daniel, R., 2006, In: Surface & coatings technology.

    Research output: Contribution to journalArticleResearchpeer-review

  47. Published

    High-temperature tribological behavior of sputtered NbNx thin films

    Fontalvo, G., Terziyska, V. & Mitterer, C., 2007, In: Surface & coatings technology. 202, p. 1017-1022

    Research output: Contribution to journalArticleResearchpeer-review

  48. Published

    High-temperature tribology and oxidation of Ti1-x-γAlxTaγN hard coatings

    Großmann, B., Tkadletz, M., Schalk, N., Czettl, C., Pohler, M. & Mitterer, C., 2018, In: Surface & coatings technology. p. 190-197

    Research output: Contribution to journalArticleResearchpeer-review

  49. E-pub ahead of print

    Impact of V , Hf and Si on oxidation processes in Ti – Al – N : Insights from ab initio molecular dynamics

    Guo, F., Holec, D., Wang, J. & Du, Y., 5 Nov 2019, (E-pub ahead of print) In: Surface & coatings technology. 381.2020, 15 January, 10 p., 125125.

    Research output: Contribution to journalArticleResearchpeer-review

  50. Published

    Improved oxidation resistance of TiAlN coatings by doping with Si or B

    Pfeiler, M., Zechner, J., Penoy, M., Michotte, C., Mitterer, C. & Kathrein, M., 2009, In: Surface & coatings technology. 203, p. 3104-3110

    Research output: Contribution to journalArticleResearchpeer-review

  51. E-pub ahead of print

    In-situ X-ray diffraction study of the oxidation behavior of arc-evaporated TiAlSiN coatings with low Al contents

    Moritz, Y., Saringer, C., Tkadletz, M., Fian, A., Czettl, C., Pohler, M. & Schalk, N., 3 Nov 2023, (E-pub ahead of print) In: Surface & coatings technology. 475.2023, 25 December, 10 p., 130161.

    Research output: Contribution to journalArticleResearchpeer-review

  52. Published

    In-situ investigation of the oxidation behavior of metastable CVD Ti1-xAlxN using a novel combination of synchrotron radiation XRD and DSC

    Saringer, C., Tkadletz, M., Stark, A., Schell, N., Czettl, C. & Schalk, N., 27 May 2019, In: Surface & coatings technology. 374.2019, 25 September, p. 617-624 8 p.

    Research output: Contribution to journalArticleResearchpeer-review

  53. Published

    In-situ investigation of the oxidation behavior of powdered TiN, Ti(C,N) and TiC coatings grown by chemical vapor deposition

    Kainz, C., Schalk, N., Saringer, C. & Czettl, C., 25 Jan 2021, In: Surface & coatings technology. 406.2021, 25 January, 6 p., 126633.

    Research output: Contribution to journalArticleResearchpeer-review

  54. Published

    Increased thermal stability of Ti-Al-N thin films by Ta alloying

    Rachbauer, R., Holec, D. & Mayrhofer, P. H., 2012, In: Surface & coatings technology. 211, p. 98-103

    Research output: Contribution to journalArticleResearchpeer-review

  55. Published

    Increased thermal stability of Ti1-xAlxN/TiN multilayer coatings through high temperature sputter deposition on powder-metallurgical high-speed steels

    Weirather, T., Chladil, K., Sartory, B., Caliskanoglu, D., Cremer, R., Kölker, W. & Mitterer, C., 2014, In: Surface & coatings technology. 257, p. 48-57

    Research output: Contribution to journalArticleResearchpeer-review

  56. Published

    Industrial-scale sputter deposition of Cr1-xAlxN coatings with 0.21<x <0.74 from segmented targets

    Weirather, T., Czettl, C., Polcik, P., Kathrein, M. & Mitterer, C., 2013, In: Surface & coatings technology. 232, p. 303-310

    Research output: Contribution to journalArticleResearchpeer-review

  57. Published

    Influence of Fe impurities on structure and properties of arc-evaporated AlCrN coatings

    Mühlbacher, M., Franz, R., Paulitsch, J., Rudigier, H., Polcik, P., Mayrhofer, P. H. & Mitterer, C., 2013, In: Surface & coatings technology. 215, p. 96-103

    Research output: Contribution to journalArticleResearchpeer-review

  58. Published

    Influence of bias voltage on microstructure, mechanical properties and thermal stability of arc evaporated Cr0.74Ta0.26N coatings

    Kainz, C., Pohler, M., Gruber, G., Tkadletz, M., Ebner, A., Czettl, C. & Schalk, N., 15 Jul 2021, In: Surface & coatings technology. 417.2021, 15 July, 8 p., 127212.

    Research output: Contribution to journalArticleResearchpeer-review

  59. Published

    Influence of bipolar pulsed DC magnetron sputtering on elemental composition and micro-structure of Ti-Al-Y-N thin films

    Moser, M., Mayrhofer, P. H., Székely, L., Sáfrán, G. & Barna, P. B., 2008, In: Surface & coatings technology. 203, p. 148-155

    Research output: Contribution to journalArticleResearchpeer-review

  60. Published

    Influence of hydrogen sulfide addition on the alumina deposition by plasma CVD

    Fink, M., Laimer, J., Störi, H. & Mitterer, C., 2005, In: Surface & coatings technology. 200, p. 360-363

    Research output: Contribution to journalArticleResearchpeer-review

  61. E-pub ahead of print

    Influence of matrix composition and MC carbide content on damage behaviour of TiN-coated high speed steel due to cyclic shear and compression load

    Gsellmann, M., Klünsner, T., Mitterer, C., Marsoner, S., Leitner, H., Boumpakis, A., Skordaris, G., Maier-Kiener, V. & Ressel, G., 16 May 2022, (E-pub ahead of print) In: Surface & coatings technology. 442.2022, 25 July, 8 p., 128546.

    Research output: Contribution to journalArticleResearchpeer-review

  62. Published

    Influence of multilayer architecture on microstructure and fracture properties of arc evaporated TiAlTaN coatings

    Waldl, H., Tkadletz, M., Czettl, C., Pohler, M. & Schalk, N., 15 Mar 2022, In: Surface & coatings technology. 433.2022, 15 March, 7 p., 128098.

    Research output: Contribution to journalArticleResearchpeer-review

  63. Published

    Influence of multiple detection events on compositional accuracy of TiN coatings in atom probe tomography

    Schiester, M., Waldl, H., Hans, M., Thuvander, M., Primetzhofer, D., Schalk, N. & Tkadletz, M., 15 Feb 2024, In: Surface & coatings technology. 477.2024, 15 February, 11 p., 130318.

    Research output: Contribution to journalArticleResearchpeer-review

  64. Published

    Influence of oxide phase formation on the tribological behaviour of Ti-Al-V-N coatings

    Kutschej, K., Mayrhofer, P., Kathrein, M., Polcik, P. & Mitterer, C., 2005, In: Surface & coatings technology. 200, p. 1731-1737

    Research output: Contribution to journalArticleResearchpeer-review

  65. Published

    Influence of phase transition on the tribological performance of arc-evaporated AlCrVN hard coatings

    Franz, R., Neidhardt, J., Kaindl, R., Sartory, B., Tessadri, R., Lechthaler, M., Polcik, P. & Mitterer, C., 2009, In: Surface & coatings technology. 203, p. 1101-1105

    Research output: Contribution to journalArticleResearchpeer-review

  66. Published

    Influence of pulsed bias duty cycle variations on structural and mechanical properties of arc evaporated (Al,Cr)2O3 coatings

    Pohler, M., Franz, R., Ramm, J., Polcik, P. & Mitterer, C., 2015, In: Surface & coatings technology. 282, p. 43-51

    Research output: Contribution to journalArticleResearchpeer-review

  67. Published

    Influence of residual stresses and grain size on the spinodal decomposition of metastable Ti1-xAlxN coatings

    Schalk, N., Mitterer, C., Keckes, J., Penoy, M. & Michotte, C., 2012, In: Surface & coatings technology. 209, p. 190-196

    Research output: Contribution to journalArticleResearchpeer-review

  68. Published

    Influences of the nitrogen content on the morphological, chemical and optical properies of pulsed laser deposited silicon nitride thin films

    Lackner, J., Waldhauser, W., Berghauser, R., Ebner, R., Beutl, M., Jakopic, G., Leising, G., Hutter, H., Rosner, M. & Schöberl, T., 2005, In: Surface & coatings technology. 192, p. 225-230

    Research output: Contribution to journalArticleResearchpeer-review

  69. Published

    Interface fracture properties of thin films studied by using the micro-cantilever deflection technique

    Matoy, K., Detzel, T., Müller, M., Motz, C. & Dehm, G., 2009, In: Surface & coatings technology. 204, p. 878-881

    Research output: Contribution to journalArticleResearchpeer-review

  70. E-pub ahead of print

    Interface-induced electronic structure toughening of nitride superlatices

    Rehák, P., Cerny, M. & Holec, D., 25 Sept 2017, (E-pub ahead of print) In: Surface & coatings technology. 325.2017, September, p. 410-416 7 p.

    Research output: Contribution to journalArticleResearchpeer-review

  71. Published

    Investigation of the microstructure of a graded ZrN/Ti0.33Al0.67N multilayer coating using cross-sectional characterization methods

    Frank, F., Tkadletz, M., Saringer, C., Czettl, C., Pohler, M., Burghammer, M., Todt, J., Zalesak, J., Keckes, J. & Schalk, N., 25 Jan 2023, In: Surface & coatings technology. 453.2023, 25 January, 8 p., 129126.

    Research output: Contribution to journalArticleResearchpeer-review

  72. Published

    Investigation of the origin of compressive residual stress in CVD TiB2 hard coatings using synchrotron X-ray nanodiffraction

    Schalk, N., Keckes, J., Czettl, C., Burghammer, M., Penoy, M., Michotte, C. & Mitterer, C., 2014, In: Surface & coatings technology. 258, p. 121-126

    Research output: Contribution to journalArticleResearchpeer-review

  73. Published

    Is it meaningful to quantify vacancy concentrations of nanolamellar (Ti,Al)N thin films based on laser-assisted atom probe data?

    Hans, M., Tkadletz, M., Primetzhofer, D., Waldl, H., Schiester, M., Bartosik, M., Czettl, C., Schalk, N., Mitterer, C. & Schneider, J. M., 25 Nov 2023, In: Surface & coatings technology. 473.2023, 25 November, 11 p., 130020.

    Research output: Contribution to journalArticleResearchpeer-review

  74. Published

    Lateral gradients of phases, residual stress and hardness in a laser heated Ti0.52Al0.48N coating on hard metal

    Bartosik, M., Daniel, R., Zhang, Z., Deluca, M., Ecker, W., Steffenelli, M., Klaus, M., Genzel, C., Stefenelli, M., Mitterer, C. & Keckes, J., 2012, In: Surface & coatings technology. 206, p. 4502-4510 9 p.

    Research output: Contribution to journalArticleResearchpeer-review

  75. Published

    Linking erosion and sputter performance of a rotatable Mo target to microstructure and properties of the deposited thin films

    Hofer-Roblyek, A. M., Pichler, K-H., Linke, C., Franz, R., Winkler, J. & Mitterer, C., 2018, In: Surface & coatings technology. p. 354-359

    Research output: Contribution to journalArticleResearchpeer-review

  76. Published

    Magnéli phase formation of PVD Mo-N and W-N coatings

    Gassner, G., Mayrhofer, P. H., Kutschej, K., Mitterer, C. & Kathrein, M., 2006, In: Surface & coatings technology. 201, p. 3335-3341

    Research output: Contribution to journalArticleResearchpeer-review

  77. Published

    Mechanical and tribological properties of Al - Ti - N/Al - Cr - B -N multilayer films synthesized by cathodic arc evaporation

    Tritremmel, C., Daniel, R., Rudigier, H., Pocik, P. & Mitterer, C., 2014, In: Surface & coatings technology. 246, p. 57-63

    Research output: Contribution to journalArticleResearchpeer-review

  78. Published

    Mechanical properties of single and polycrystalline α-Al2O3 coatings grown by chemical vapor deposition

    Konstantiniuk, F., Tkadletz, M., Kainz, C., Czettl, C. & Schalk, N., 11 Feb 2021, In: Surface & coatings technology. 410.2021, 25 March, p. 1-7 7 p., 126959.

    Research output: Contribution to journalArticleResearchpeer-review

  79. Published

    Mechanisms of topography formation of magnetron-sputtered chromium-based coatings on epoxy polymer composites

    Lackner, J. M., Waldhauser, W., Ganser, C., Teichert, C., Kot, M. & Major, L., 2014, In: Surface & coatings technology. 241, p. 80-85

    Research output: Contribution to journalArticleResearchpeer-review

  80. Published

    Microstructural and micro-mechanical investigation of cathodic arc evaporated ZrN/TiN multilayer coatings with varying bilayer thickness

    Frank, F., Kainz, C., Tkadletz, M., Czettl, C., Pohler, M. & Schalk, N., 25 Feb 2022, In: Surface & coatings technology. 432.2022, 25 February, 9 p., 128070.

    Research output: Contribution to journalArticleResearchpeer-review

  81. Published

    Microstructure and mechanical properties of CVD TiN/TiBN multilayer coatings

    Kainz, C., Schalk, N., Tkadletz, M., Mitterer, C. & Czettl, C., 25 Jul 2019, In: Surface & coatings technology. 370.2019, July, p. 311-319 9 p.

    Research output: Contribution to journalArticleResearchpeer-review

  82. Published

    Microstructure and mechanical properties of arc evaporated Ti(Al,Si)N coatings

    Moritz, Y., Kainz, C., Tkadletz, M., Czettl, C., Pohler, M. & Schalk, N., 15 Sept 2021, In: Surface & coatings technology. 421.2021, 15 September, 8 p., 127461.

    Research output: Contribution to journalArticleResearchpeer-review

  83. Published

    Microstructure and mechanical properties of nanocrystalline Al-Cr-B-N thin films

    Tritremmel, C., Daniel, R., Lechthaler, M., Rudigier, H., Polcik, P. & Mitterer, C., 2012, In: Surface & coatings technology. 213, p. 1-7

    Research output: Contribution to journalArticleResearchpeer-review

  84. Published

    Microstructure modifications of CrN coatings by pulsed bias sputtering

    Grasser, S., Daniel, R. & Mitterer, C., 2012, In: Surface & coatings technology. 206, p. 4666-4671

    Research output: Contribution to journalArticleResearchpeer-review

  85. Published

    Microstructure, mechanical and thermo-physical properties of CVD TiCxN1-x coatings on cemented carbide substrates grown with C2H6 as C feeding precursor

    Kainz, C., Schalk, N., Tkadletz, M., Winkler, M. & Czettl, C., 25 Jul 2020, In: Surface & coatings technology. 394.2020, 25 July, 7 p., 125868.

    Research output: Contribution to journalArticleResearchpeer-review

  86. Published

    Microstructure-property relations of reactively magnetron sputtered VCxNy films

    Mitterer, C., Fateh, N. & Munnik, F., 2011, In: Surface & coatings technology. p. 3805-3809

    Research output: Contribution to journalArticleResearchpeer-review

  87. E-pub ahead of print

    Molecularly grafted, structurally integrated multifunctional polymer thin films with improved adhesion

    Lassnig, A., Nakamura, N., Jörg, T., Reeja-Jayan, B. & Cordill, M., 28 Jun 2018, (E-pub ahead of print) In: Surface & coatings technology. 349.2018, 15 September, p. 963-968 6 p.

    Research output: Contribution to journalArticleResearchpeer-review

  88. Published

    Multifunctional multi-component PVD coatings for cutting tools

    Kathrein, M., Michotte, C., Penoy, M., Polcik, P. & Mitterer, C., 2005, In: Surface & coatings technology. 200, p. 1867-1871

    Research output: Contribution to journalArticleResearchpeer-review

  89. Published

    Multilayer coatings based on the combination of perfluorinated organosilanes and nickel films for injection moulding tools

    Calderon, J. C., Koch, L., Bandl, C., Kern, W., Jilg, J., Schilp, C., Moritzer, E. & Grundmeier, G., 8 Jul 2020, In: Surface & coatings technology. 399.2020, 15 October, 14 p.

    Research output: Contribution to journalArticleResearchpeer-review

  90. Published

    Near-interface cracking in a TiN coated high speed steel due to combined shear and compression under cyclic impact loading

    Gsellmann, M., Klünsner, T., Mitterer, C., Marsoner, S., Skordaris, G., Bouzakis, K., Leitner, H. & Ressel, G., 25 Jul 2020, In: Surface & coatings technology. 394.2020, 25 July, 6 p., 125854.

    Research output: Contribution to journalArticleResearchpeer-review

  91. Published

    Needle grass array of nanostructured nickel cobalt sulfide electrode for clean energy generation

    Zequine, C., Bhoyate, S., Siam, K., Kahol, P. K., Kostoglou, N., Mitterer, C., Hinder, S., Baker, M., Constantinides, G., Rebholz, C., Gupta, G., Li, X. & Gupta, R. K., 2018, In: Surface & coatings technology. p. 306-312

    Research output: Contribution to journalArticleResearchpeer-review

  92. E-pub ahead of print

    Non-reactive dc magnetron sputter deposition of Mo-O thin films from ceramic MoOx targets

    Pachlhofer, J., Martin-Luengo, A. T., Franz, R., Franzke, E., Köstenbauer, H., Winkler, J., Bonanni, A., Mitterer, S. & Mitterer, C., 18 Sept 2017, (E-pub ahead of print) In: Surface & coatings technology. 332.2017, 25 December, p. 80-85 6 p.

    Research output: Contribution to journalArticleResearchpeer-review

  93. Published

    Non-reactively sputtered ultra-high temperature Hf-C and Ta-C coatings

    Lasfargues, H., Glechner, T., Koller, C., Paneta, V., Primetzhofer, D., Kolozsvari, S., Holec, D., Riedl, H. & Mayrhofer, P. H., 2017, In: Surface & coatings technology. 309.2017, 15 January, p. 436-444 9 p.

    Research output: Contribution to journalArticleResearchpeer-review

  94. E-pub ahead of print

    On the influence of the Cr/(Cr + Ta) ratio on the microstructure, mechanical properties and thermal stability of magnetron sputtered CrxTa1-xN coatings

    Kainz, C., Kölbl, L. & Schalk, N., 13 Sept 2022, (E-pub ahead of print) In: Surface & coatings technology. 447.2022, 15 October, p. 1-7 128877.

    Research output: Contribution to journalArticleResearchpeer-review

  95. Published

    Origin of high temperature oxidation resistance of Ti-Al-Ta-N coatings

    Hollerweger, R., Riedl, H., Paulitsch, J., Arndt, M., Rachbauer, R., Polcik, P., Primig, S. & Mayrhofer, P. H., 2014, In: Surface & coatings technology. 257, p. 78-86

    Research output: Contribution to journalArticleResearchpeer-review

  96. Published

    Oxidation behavior of arc evaporated TiSiN coatings investigated by in-situ synchrotron X-ray diffraction and HR-STEM

    Moritz, Y., Saringer, C., Tkadletz, M., Stark, A., Schell, N., Letofsky-Papst, I., Czettl, C., Pohler, M. & Schalk, N., 25 Dec 2020, In: Surface & coatings technology. 404.2020, 25 December, 9 p., 126632.

    Research output: Contribution to journalArticleResearchpeer-review

  97. Published

    Oxidation behaviour and tribological properties of arc-evaporated ZrAlN hard coatings

    Franz, R., Lechthaler, M., Polcik, P. & Mitterer, C., 2012, In: Surface & coatings technology. 206, p. 2337-2345

    Research output: Contribution to journalArticleResearchpeer-review

  98. E-pub ahead of print

    Oxidation mechanism of sputter deposited model SiNx/TiN/SiNx coatings

    Moritz, Y., Kainz, C., Peritsch, P., Mitterer, C. & Schalk, N., 26 Jun 2023, (E-pub ahead of print) In: Surface and Coatings Technology. 468.2023, 15 September, 7 p., 129753.

    Research output: Contribution to journalArticleResearchpeer-review

  99. Published

    Performance of nano-structured multilayer PVD coating TiAlN/VN in dry high speed milling of aerospace aluminium 7010-T7651

    Luo, Q., Robinson, G., Pittman, M., Howarth, M., Sim, W-M., Stalley, M. R., Leitner, H., Ebner, R., Caliskanoglu, Z. D. & Hovsepian, P. E., 2005, In: Surface & coatings technology. 200, p. 123-127

    Research output: Contribution to journalArticleResearchpeer-review

  100. Published

    Phase composition and thermal stability of arc evaporated Ti1 − xAlxN hard coatings with 0.4 ≤ x ≤ 0.67

    Großmann, B., Schalk, N., Czettl, C., Pohler, M. & Mitterer, C., 2017, In: Surface & coatings technology. 309.2017, 15 January, p. 687-693 7 p.

    Research output: Contribution to journalArticleResearchpeer-review

  101. Published

    Phase stability and alloy-related trends in Ti-Al-N, Zr-Al-N and Hf-Al-N systems from first principles

    Holec, D., Rachbauer, R., Chen, L., Wang, L., Luef, D. & Mayrhofer, P. H., 2011, In: Surface & coatings technology. 206, p. 1698-1704

    Research output: Contribution to journalArticleResearchpeer-review

Previous 1 2 Next