Jozef Keckes

201 - 250 out of 318Page size: 50

Research output

  1. 2010
  2. Published

    Effect of Grain Size on the Residual Stress State and Thermal Expansion in Magnetron Sputtered Thin Films

    Daniel, R., Holec, D., Keckes, J. & Mitterer, C., 2010, Proceedings 37th International Conference on Metallurgical Coatings and Thin Films. p. 63-63

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. Published

    In situ μLaue tensile tests on micron sized Cu single crystals

    Kirchlechner, C., Imrich, P., Grosinger, W., Kapp, M., Motz, C., Keckes, J. & Dehm, G., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  4. Published

    Methodology for studying strain inhomogeneities in polycrystalline thin films during in situ thermal loading using coherent x-ray diffraction

    Vaxelaire, N., Proudhon, H., Labat, S., Kirchlechner, C., Keckes, J., Jaques, V., Ravy, S., Forest, S. & Thomas, O., 2010, In: New journal of physics. p. 1-12

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Nano-Beam X-ray Diffraction Reveals Structural and Mechanical Gradients in Nano-Crystalline Thin Films

    Keckes, J., Bartosik, M., Daniel, R., Mitterer, C., Maier, G., Schoeder, S. & Burghammer, M., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  6. Published

    Residual stresses and thermal fatigue in CrN hard coatings characterized by high-temperature synchrotron X-ray diffraction

    Kirchlechner, C., Martinschitz, K. J., Daniel, R., Klaus, M., Genzel, C., Mitterer, C. & Keckes, J., 2010, In: Thin solid films. 518, 8, p. 2090-2096

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Review: current international research into cellulose nanofibres and nanocomposites

    Keckes, J., Eichhorn, S. J., Dufresne, A., Aranguren, M., Marcovich, N. E., Capadona, J. R., Rowan, S. J., Weder, C., Thielemans, W., Roman, M., Renneckar, S., Gindl, W., Veigel, S., Yano, H., Abe, K., Nogi, M. & Nakagaito, A. N., 2010, In: Journal of materials science. p. 1-33

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    The origin of stresses in magnetron-sputtered thin films with zone T structures

    Daniel, R., Martinschitz, K., Keckes, J. & Mitterer, C., 2010, In: Acta materialia. 58, p. 2621-2633

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Thermal Decomposition of Epitaxial Al-Cr-N Hard Coatings: Crystallography and Mechanical State of Individual Phases

    Bartosik, M., Daniel, R., Mitterer, C. & Keckes, J., 2010, Proceedings 37th International Conference on Metallurgical Coatings and Thin Films. p. 63-63

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. Published

    Thermally-induced formation of hexagonal AlN in AlCrN hard coatings on sapphire: Orientation relationships and residual stresses

    Bartosik, M., Daniel, R., Mitterer, C. & Keckes, J., 2010, In: Surface & coatings technology. 205, p. 1320-1323

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    X-ray diffraction analysis of three-dimensional residual stress fields reveals origins of thermal fatigue in uncoated and coated steel

    Kirchlechner, C., Martinschitz, K. J., Daniel, R., Mitterer, C., Donges, J., Rothkirch, A., Klaus, M., Genzel, C. & Keckes, J., 2010, In: Scripta materialia. 62, p. 774-777

    Research output: Contribution to journal › Article › Research › peer-review

  12. 2009
  13. Published

    Actual versus apparent within cell wall variability of nanoindentation results from wood cell walls related to cellulose microfibril angle

    Konnerth, J., Gierlinger, N., Keckes, J. & Gindl, W., 2009, In: Journal of materials science. 44, p. 4399-4406

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Cellulose in never-dried gel oriented by an AC electric field

    Gindl, W., Emsenhuber, G., Maier, G. & Keckes, J., 2009, In: Biomacromolecules. 10, p. 1315-1318

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Characterization of Mo/Si soft X-ray multilayer mirrors by grazing-incidence small-angle X-ray scattering

    Siffalovic, P., Majkova, E., Chitu, L., Jergel, M., Luby, S., Keckes, J., Maier, G. A., Timmann, A., Roth, S. V., Tsuru, T., Harada, T., Yamamoto, M. & Heinzmann, U., 2009, In: Vacuum. 89, p. 19-25

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Comparison of molecular orientation and mechanical properties of lyocell fibre tow and staple fibres

    Keckes, J., Martinschitz, K. J., Boesecke, P., Weber, H., Roeder, T., Sixta, H. & Gindl, W., 2009, In: Cellulose. 16, p. 765-772

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Elastic constants of fibre-textured thin films determined by X-ray diffraction

    Martinschitz, K. J., Daniel, R., Mitterer, C. & Keckes, J., 2009, In: Journal of applied crystallography. 42, p. 1-13

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Investigation of fracture properties of magnetron-sputtered TiN films by means of a FIB-based cantilever bending technique

    Massl, S., Thomma, W., Keckes, J. & Pippan, R., 2009, In: Acta materialia. 57, p. 1768-1776

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Microstructural evolution during growth of polycrystallin CrN coatings: The role of a Cr interlayer

    Daniel, R., Martinschitz, K. J., Keckes, J. & Mitterer, C., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  20. Published

    Microstructural evolution during growth of polycrystalline CrN coatings: The role of a Cr interlayer

    Daniel, R., Martinschitz, K., Keckes, J. & Mitterer, C., 2009, Proceedings E-MRS Spring. p. 9-9

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  21. Published

    Microstructure related stress state in magnetron sputtered thin films

    Daniel, R., Martinschitz, K., Keckes, J. & Mitterer, C., 2009, Proceedings E-MRS Spring Meeting. p. 25-25

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. Published

    Micro tensile tests: New insights based on µDiffraction

    Kirchlechner, C., Motz, C., Grosinger, W., Labat, S., Perroud, O., Thomas, O., Micha, J.-S., Ulrich, O., Dehm, G. & Keckes, J., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  23. Published

    Novel technique to determine elastic constants of thin films

    Martinschitz, K., Daniel, R., Mitterer, C. & Keckes, J., 2009, Material Research Society Symposium Proceedings 1139. p. 115-120

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. Published

    Real-time tracking of nanoparticle self-assembling using GISAXS

    Majkova, E., Siffalovic, P., Chitu, L., Jergel, M., Luby, S., Timmann, A., Roth, S. V., Satka, A., Keckes, J. & Maier, G. A., 2009, In: Superlattices and microstructures. 46, p. 286-290

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Structure, stresses and stress relaxation of TiN/Ag nanocomposite films

    Köstenbauer, H., Fontalvo, G., Mitterer, C., Hlawacek, G., Teichert, C. & Keckes, J., 2009, In: Journal of nanoscience and nanotechnology. 9, p. 3606-3610

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Structure, stresses and stress relaxation of TiN/Cu multilayer and nanocomposite coatings

    Köstenbauer, H., Hofer, A. M., Fontalvo, G., Keckes, J. & Mitterer, C., 2009, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 100, p. 114-118

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Texture development in polycrystalline CrN coatings: the role of growth conditions and a Cr interlayer

    Daniel, R., Martinschitz, K. J., Keckes, J. & Mitterer, C., 2009, In: Journal of physics / D, Applied physics. p. 1-13

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    The origin of stresses in magnetron sputtered thin films

    Daniel, R., Mitterer, C., Martinschitz, K. J. & Keckes, J., 2009, Proceedings of 4th International Conference on Surface, coatings and Nanostructured Materials. p. 44-44

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  29. 2008
  30. Published

    A new cantilever technique reveals spatial distributions of residual stresses in near-surface structures

    Massl, S., Keckes, J. & Pippan, R., 2008, In: Scripta materialia. 59, p. 503-506

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Changes in microfibril angle in cyclically deformed dry coir fibers studied by in-situ synchrotron X-ray diffraction

    Martinschitz, K. J., Boesecke, P., Garvey, C. J., Gindl, W. & Keckes, J., 2008, In: Journal of materials science. 43, p. 350-356

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    High-temperature characterization of three-dimensional distribution of residual stresses in Crn coatings on steel

    Martinschitz, K. J., Kirchlechner, C., Keckes, J., Daniel, R. & Mitterer, C., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  33. Published

    Intrinsic stresses and stress relaxation in TiN/Ag multilayer coatings during thermal cycling

    Köstenbauer, H., Fontalvo, G., Keckes, J. & Mitterer, C., 2008, In: Thin solid films. 516, p. 1920-1924

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Position resolved residual stress determination in alumina-zirconia multilayered ceramics

    Maier, G., Keckes, J., Brechbuehl, J., Guerault, H. & Bermejo Moratinos, R., 2008, In: Materials Science Forum . 571-572, p. 421-425

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Precipitation processes in a Mg–Zn–Sn alloy studied by TEM and SAXS

    Rashkova, B., Prantl, W., Görgl, R., Keckes, J., Cohen, S., Bamberger, M. & Dehm, G., 2008, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. A494, p. 158-164

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Reorientation of Crystalline and Noncrystalline Regions in Regenerated Cellulose Fibers and Films Tested in Uniaxial Tension

    Gindl, W., Reifferscheid, M., Martinschitz, K. J., Boesecke, P. & Keckes, J., 2008, In: Journal of polymer science : B, Polymer physics. 46, p. 297-304

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Residual stresses in thermally cycled Cr-CrN coatings on Si (100) and on steel

    Martinschitz, K. J., Kirchlechner, C., Daniel, R., Mitterer, C. & Keckes, J., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  38. Published

    Residual stresses in thermally cycled CrN coatings on steel

    Kirchlechner, C., Martinschitz, K. J., Daniel, R., Mitterer, C. & Keckes, J., 2008, In: Thin solid films. 517, p. 1167-1171

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Stress evolution in CrN/Cr coating systems during thermal straining

    Martinschitz, K. J., Daniel, R., Mitterer, C. & Keckes, J., 2008, In: Thin solid films. 516, p. 1972-1976

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Stress measurement in thin films with the ion beam layer removal method: Influence of experimental errors and parameters

    Massl, S., Köstenbauer, H., Keckes, J. & Pippan, R., 2008, In: Thin solid films. 516, p. 8655-8662

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Temperature Dependence of Residual Stress Gradients in Shot-Peened Steel Coated with CrN

    Martinschitz, K. J., Kirchlechner, C., Daniel, R., Maier, G., Mitterer, C. & Keckes, J., 2008, Stress evaluation in materials using neutrons and synchrotron radiation : selected, peer reviewed papers from the International Conference on Stress Evaluation Using Neutrons and Synchrotron Radiation proceedings, Vienna 24 – 26 September 2007 . Pyzalla, A. R. (ed.). Stafa-Zurich [u.a.] : Trans Tech Publications, p. 101-106 (Materials Science Forum; vol. 571/572 ).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. Published

    Thermal Stresses and Microstructure of Tungsten Films on Copper

    Kapp, M., Martinschitz, K. J., Keckes, J., Lackner, J. M., Zizak, I. & Dehm, G., 2008, In: Berg- und hüttenmännische Monatshefte : BHM. 517, p. 273-277

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Tribological behavior of TiN/Ag nanocomposite coatings

    Köstenbauer, H., Fontalvo, G., Mitterer, C. & Keckes, J., 2008, In: Tribology Letters. p. 53-60

    Research output: Contribution to journal › Article › Research › peer-review

  44. 2007
  45. Published

    A direct method of determining complex depth profiles of residual stresses in thin films on a nanoscale

    Massl, S., Keckes, J. & Pippan, R., 2007, In: Acta materialia. 55, p. 4835-4844

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Annealing of intrinsic stresses in sputtered TiN films: The role of thickness-dependent gradients of point defect density

    Köstenbauer, H., Fontalvo, G., Kapp, M., Keckes, J. & Mitterer, C., 2007, In: Surface & coatings technology. 201, p. 4777-4780

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Development of texutre in polycrystalline CrN coatings: The role of a Cr interlayer

    Daniel, R., Martinschitz, K. J., Keckes, J. & Mitterer, C., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  48. Published

    Drawing of self-reinforced cellulose films

    Gindl, W. & Keckes, J., 2007, In: Journal of Applied Polymer Science. 103, p. 2703-2708

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Fracture of poly(vinylidene fluoride): a combined synchrotron and laboratory in-situ X-ray scattering study

    Maier, G. A., Wallner, G., Lang, R., Keckes, J., Amentisch, H. & Fratzl, P., 2007, In: Journal of applied crystallography. 40, Supplement April, p. s564-s567

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    High-temperature residual stresses in thin films characterized by x-ray diffraction substrate curvature method

    Keckes, J., Eiper, E., Martinschitz, K. J., Köstenbauer, H., Daniel, R. & Mitterer, C., 2007, In: Review of scientific instruments. 78, p. 036103-01-036103-03

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Nano/macro-hardness and fracture resistance of Si3N4/SiC composites with up to 13 wt.% of SiC nano-particles

    Balog, M., Keckes, J., Schöberl, T., Galusek, D., Hofer, F., Krest'an, J., Lences, Z., Huang, J. L. & Sajgalik, P., 2007, In: Journal of the European Ceramic Society. 27, p. 2145-2152

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Residual stresses in thermally cycled Cr-crN coatings on Si(100) and on shot peened steel

    Martinschitz, K. J., Kirchlechner, C., Daniel, R., Mitterer, C. & Keckes, J., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  53. Published

    Residual stresses in thermally cycled Cr-CrN coatings on Si (100) and on shot peened steel

    Martinschitz, K. J., Kirchlechner, C., Daniel, R., Mitterer, C. & Keckes, J., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  54. Published

    Residual stresses in thermally cycled Cr-CrN coatings on Si (100) and on steel

    Martinschitz, K., Kirchlechner, C., Daniel, R., Mitterer, C. & Keckes, J., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

Previous 1 2 3 4 5 6 7 Next
View graph of relations

Latest Research Output

View more (318)