Department Polymer Engineering and Science

Organisational unit: Departments and Institutes

101 - 200 out of 4,192Page size: 100

Research output

  1. 2024
  2. Published

    Effect of Flashlamp Heating System Parameters on the Wedge Peel Strength of Thermoplastic Carbon Fiber Tape in the Automated Tape Placement Process

    Legenstein, A. & Fauster, E., 29 Apr 2024, In: Journal of Manufacturing and Materials Processing. 8.2024, 3, 17 p., 91.

    Research output: Contribution to journal › Article › Research › peer-review

  3. E-pub ahead of print

    Vitrimer Transition Phenomena from the Perspective of Thermal Volume Expansion and Shape (In)stability

    Klingler, A., Reisinger, D., Schlögl, S., Wetzel, B., Breuer, U. & Krüger, J. K., 25 Apr 2024, (E-pub ahead of print) In: Macromolecules. 57.2024, 9, p. 4246-4253 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Reducing part deformation of isotactic polypropylene specimens fabricated with powder bed fusion technique through controlling crystallization behaviors

    Gao, X., Guo, J., Zhang, D., Li, J., Su, Y., Arbeiter, F. & Li, H., 24 Apr 2024, In: Journal of polymer science. 62.2024, 13, p. 3025-3037 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  5. E-pub ahead of print

    Morphological investigations on silica and carbon-black filled acrylonitrile butadiene rubber for sealings used in high-pressure H2 applications

    Clute, C., Balasooriya, W., Cano Murillo, N., Theiler, G., Kaiser, A., Fasching, M., Schwarz, T., Hausberger, A., Pinter, G. & Schlögl, S., 23 Apr 2024, (E-pub ahead of print) In: International Journal of Hydrogen Energy . 67.2024, 20 May, p. 540-552 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Synthesis of Bio-Based Polyester Resins for Vat Photopolymerization 3D Printing

    Cazin, I., Ocepek, M., Kecelj, J., Stražar, A. S. & Schlögl, S., 19 Apr 2024, In: Materials. 17.2024, 8, 13 p., 1890.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Treatment of carbon electrodes with Ti3C2Tx MXene coating and thermal method for vanadium redox flow batteries: a comparative study

    Teenakul, K., Alem, S. A. A., Gond, R., Thakur, A., Anasori, B. & Khataee, A., 19 Apr 2024, In: RSC Advances. 14.2024, 18, p. 12807-12816 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Polymer Processing Bringing Together Polymers, Metals and Ceramics

    Holzer, C., 18 Apr 2024.

    Research output: Contribution to conference › Abstract

  9. Published

    Production of Permanent Magnets from Recycled NdFeB Powder with Powder Extrusion Moulding

    Rathfelder, S., Schuschnigg, S., Kukla, C., Holzer, C. & Burkhardt, C., 18 Apr 2024, In: Journal of Manufacturing and Materials Processing. 8.2024, 2, 19 p., 81.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Functionalization of PTFE substrates with quaternary ammonium groups: An approach towards anion conducting properties

    Bandl, C., Kern, W., Ranz, M. & Grabner, B., 10 Apr 2024, In: Applied surface science. 661.2024, 15 July, 11 p., 160084.

    Research output: Contribution to journal › Article › Research › peer-review

  11. E-pub ahead of print

    MetamaterialFinder: A software framework for discovering and analyzing mechanical metamaterials based on simple closed curves

    Fleisch, M., Thalhamer, A., Schlögl, S., Fuchs, P. F., Pinter, G. & Berer, M., 2 Apr 2024, (E-pub ahead of print) In: Advances in Engineering Software. 192.2024, June, 18 p., 103626.

    Research output: Contribution to journal › Article › Research › peer-review

  12. E-pub ahead of print

    Nanoparticles bearing germanium based photoinitiators at their surface: Preparation and use in grafting-from photopolymerization reactions

    Müller, M., Drusgala, M., Fischer, R. C., Kern, W., Haas, M. & Bandl, C., 2 Apr 2024, (E-pub ahead of print) In: Applied surface science. 661.2024, 15 July, 16 p., 160035.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    ConForce: Computation of configurational forces for FEM results

    Rettl, M., Frankl, S. M., Pletz, M., Tauscher, M. & Schuecker, C., 1 Apr 2024, In: SoftwareX. 26.2024, May, 6 p., 101718.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Investigation into the state of cure of elastomers through nanoindentation

    Schieppati, J., Gehling, T., Azevedo, M., Kerschbaumer, R. C., Christöfl, P., Oreski, G., Fasching, M. A., Schwarz, T. & Pinter, G., 1 Apr 2024, In: Polymer Testing. 133.2024, April, 9 p., 108417.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Dual-Wavelength Vat Photopolymerization 3D Printing with Hybrid Acrylate-Epoxy Resins: Influence of Resin Composition on Microstructure and Mechanical Properties

    Cazin, I., Plevová, K., Alabiso, W., Vidović, E. & Schlögl, S., Apr 2024, In: Advanced Engineering Materials. 26.2024, 8, 12 p., 2301699.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Impact Characteristics and Repair Approaches of Distinct Bio-Based Matrix Composites: A Comparative Analysis

    Ravindran, B., Agathocleous, T., Oswald-Tranta, B., Fauster, E. & Feuchter, M., 29 Mar 2024, In: Journal of composites science. 8.2024, 4, 20 p., 126.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Shape or size matters? Towards standard reporting of tensile testing parameters for human soft tissues: systematic review and finite element analysis

    Lin, A. C., Pirrung, F., Niestrawska, J. A., Ondruschka, B., Pinter, G., Henyš, P. & Hammer, N., 26 Mar 2024, In: Frontiers in Bioengineering and Biotechnology. 12.2024, 1368383.

    Research output: Contribution to journal › Review article › peer-review

  18. Published

    M5 — Mars Magnetospheric Multipoint Measurement Mission: A multi-spacecraft plasma physics mission to Mars

    Larkin, C. J. K., Lundén, V., Schulz, L., Baumgartner-Steinleitner, M., Brekkum, M., Cegla, A., Dazzi, P., Iuliis, A. D., Gesch, J., Lennerstrand, S., Nesbit-Östman, S., Castro Pires, V. D., Palanca, I. T., Teubenbacher, D., Enengl, F. & Hallmann, M., 15 Mar 2024, In: Advances in Space Research. 73.2024, 6, p. 3235-3255 21 p.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Prospects in the application of a frontally curable epoxy resin for cured-in-place-pipe rehabilitation

    Malik, M. S., Wolfahrt, M., Domínguez Pardo, J. J., Bublitz, D. & Schlögl, S., 5 Mar 2024, In: Journal of applied polymer science. 141.2024, 9, 13 p., e55024.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Effect of different weft-knitted structures on the mechanical performance of bio-based flexible composites

    Schwaiger, M., Bender, M., Schirmer, H., Taesler, J., Feuchter, M. & Resch-Fauster, K., Mar 2024, In: Composites Part C: Open Access. 13.2024, March, 11 p., 100436.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    UV lamp spectral effects on the aging behavior of encapsulants for photovoltaic modules

    Heidrich, R., Barretta, C., Mordvinkin, A., Pinter, G. G., Oreski, G. & Gottschalg, R., Mar 2024, In: Solar energy materials and solar cells. 266.2024, March, 17 p., 112674.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Thermally-activated locomotion of a bilayer polymer actuator

    Fedoryak, A. N., Doroshenko, T. P., Golenkov, O. G., Kratzer, M., Huszar, M., Plevová, K., Haiden, L., Teichert, K. C. & Dimitriev, O. P., 24 Feb 2024, In: Smart Materials in Manufacturing. 2.2024, 12 p., 100047.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Redox cationic frontal polymerization: a rapid curing approach for carbon fiber-reinforced composites with high fiber content

    Malik, M. S., Wolfahrt, M., Pinter, G. & Schlögl, S., 22 Feb 2024, In: Monatshefte fur Chemie. 155.2024, 2, p. 205-217 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  24. E-pub ahead of print

    Comparative analysis of binder systems in copper feedstocks for metal extrusion additive manufacturing and metal injection moulding

    Sadaf, M., Cano Cano, S., Bragaglia, M., Schuschnigg, S., Kukla, C., Holzer, C., Vály, L., Kukla, C., Kitzmantel, M., Nanni, F. & Gonzalez-Gutierrez, J., 21 Feb 2024, (E-pub ahead of print) In: Journal of Materials Research and Technology. 29.2024, March-April, p. 4433-4444 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Tensile properties of flexible composites with knitted reinforcements from various yarn materials

    Schwaiger, M., Röper, F., Wolfahrt, M., Taesler, J., Schirmer, H., Salzmann, M., Feuchter, M. & Resch-Fauster, K., 20 Feb 2024, In: Polymer Composites. 45.2024, 3, p. 2602-2614 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Rapid tooling for rubber extrusion molding by digital light processing 3D printing with dual curable vitrimers

    Höller, R., Hrbinič, K., Reisinger, D., Alabiso, W., Schuschnigg, S., Fleisch, M., Waly, C., Rossegger, E. & Schlögl, S., 19 Feb 2024, In: Applied research. 3.2024, 4, 10 p., e202300133.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Characterization of fracture behavior under impact-like loading conditions of elastomeric grades for high-pressure gas applications

    Balasooriya, W., Kaiser, A., Fasching, M., Hausberger, A., Schwarz, T. & Pinter, G. G., 16 Feb 2024, In: Polymer. 294.2024, 16 February, 12 p., 126718.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Ternary low-friction coatings on thermoplastics by plasma spraying: Investigations on the process-structure

    Kopp, D., Gleirscher, M., Stummer, M., Major, L., Hausberger, A., Schlögl, S., Lackner, J. M., Kaindl, R., Prethaler, T., Coclite, A. M. & Waldhauser, W., 15 Feb 2024, In: Surface and Coatings Technology. 477.2024, 15 February, 14 p., 130303.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Investigation on strategies for optimizing process definition in rubber processing: A study on mechanical and chemical properties of vulcanizates as basis for the development of a new calculation model for quality prediction

    Traintinger, M., Kerschbaumer, R. C., Hornbachner, M., Lechner, B. & Lucyshyn, T., 10 Feb 2024, In: Journal of applied polymer science. 141.2024, 6, 18 p., e54901.

    Research output: Contribution to journal › Article › Research › peer-review

  30. E-pub ahead of print

    Delamination prevention of composite joints with asymmetric carbon-fiber reinforced plastic adherends

    Castro Pires, V. D., Carbas, R. J., Marques, E. A. & Silva, L. F. D., 9 Feb 2024, (E-pub ahead of print) In: Journal of composite materials. 58.2024, 8, p. 1015-1029 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Analysis of different polypropylene waste bales: Evaluation of the source material for PP recycling

    Geier, J., Bredács, M., Witschnigg, A., Vollprecht, D. & Oreski, G., 6 Feb 2024, In: Waste Management and Research. 42.2024, 9, p. 767-775 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    In situ and ex situ quantification of nanoparticle fluxes in magnetron sputter inert gas condensation: A Cu nanoparticle case study

    Knabl, F., Bandl, C., Griesser, T. & Mitterer, C., 17 Jan 2024, In: Journal of vacuum science & technology / A (JVST). 42.2024, 2, 10 p., 023201.

    Research output: Contribution to journal › Article › Research › peer-review

  33. E-pub ahead of print

    Thermal volume expansion as seen by Temperature-modulated optical refractometry, Oscillating dilatometry and Thermo-mechanical analysis

    Klingler, A., Gilberg, M., Reisinger, D., Schlögl, S., Wetzel, B. & Krüger, J. K., 14 Jan 2024, (E-pub ahead of print) In: Polymer Testing. 131.2024, February, 9 p., 108340.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    The reduction of stress concentrations in adhesive joints with the use of curved aluminum adherends

    Castro Pires, V. D., Ribeiro, F. C. C., Carbas, R., Marques, E. A. S. & Silva, L. F. M. D., 12 Jan 2024, In: Mechanics of advanced materials and structures. 31.2024, 28, 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Dual-vat photopolymerization 3D printing of vitrimers

    Shaukat, U., Thalhamer, A., Rossegger, E. & Schlögl, S., 5 Jan 2024, In: Additive Manufacturing. 79.2024, 5 January, 9 p., 103930.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Influence of Anion and Cation Structures on Ionic Liquid Epoxy-Based Vitrimers

    Wanghofer, F., Trausner, C., Reisinger, D., Wolfahrt, M. & Schlögl, S., 1 Jan 2024, In: ACS applied polymer materials. 6.2024, 1, p. 649-657 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    A characterization program for cell spacer materials: unveiling key performance parameters for advanced battery stack assemblies

    Liu, D. T., 2024

    Research output: Thesis › Master's Thesis

  38. Published

    A comprehensive methodology for criticality assessment of microvias in printed circuit board assemblies

    Kamble, V. G., Patel, D. R., Schipfer, C., Thalhamer, A., Zuendel, J., Krivec, T., Antretter, T. & Fuchs, P. F., 2024, 2024 25th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2024. Institute of Electrical and Electronics Engineers, (2024 25th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2024).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    Acoustic Emission based determination of delamination initiation in GFRP laminates

    Brunner, A. J., Koss, V., Gfrerrer, M. & Pinter, G., 2024, Proceedings of the 36th Conference of the European Working Group on Acoustic Emission.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. Published

    AE based crack size estimates from delamination propagation in fiber reinforced thermoset composites

    Gfrerrer, M., Koss, V., Pinter, G. & Brunner, A. J., 2024, Proceedings of the 36th Conference of the European Working Group on Acoustic Emission.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  41. Published

    Application of frontal polymerization on an industrial scale - challenges and solutions

    Malik, M. S., 2024

    Research output: Thesis › Doctoral Thesis

  42. Published

    Biobasierte Binder für Naturoberflächen

    Watzenig, M., 2024

    Research output: Thesis › Master's Thesis

  43. Published

    Characterization of short fiber reinforced polymers in the very high cycle fatigue regime

    Puregger, F., 2024

    Research output: Thesis › Master's Thesis

  44. Published

    Characterization of the in-situ effect in cross-ply laminates using acoustic emission analysis and optical crack detection

    Paulczinsky, L., 2024

    Research output: Thesis › Master's Thesis

  45. Published

    Characterization of the viscoelastic material properties of FR-4 materials

    Zach, D., 2024

    Research output: Thesis › Master's Thesis

  46. Published

    Circular Economy Potential of Sustainable Bio-Based Composites: Repair, Recycle and Reuse

    Ravindran, B. & Fauster, E., 2024.

    Research output: Contribution to conference › Poster › Research

  47. Published

    Development of Material and Processing Parameters for AM

    Ureña, J., Blasco, J. R., Jordá, O., Martínez, M., Portolés, L., Gonzalez-Gutierrez, J. & Schuschnigg, S., 2024, Springer Tracts in Additive Manufacturing. Springer Nature, p. 231-306 76 p. (Springer Tracts in Additive Manufacturing; vol. Part F3252).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  48. Published

    Development of thermo-responsive silicon resins for safety applications

    Arceta Lozano, A., 2024

    Research output: Thesis › Master's Thesis

  49. Published

    Different approaches for the fabrication of functional surfaces by introducing micro-patterns on polymers

    Gleirscher, M., Rossegger, E., Greco, F. (Co-editor) & Schlögl, S., 2024.

    Research output: Contribution to conference › Poster › Research

  50. Published

    Dynamic thioester-networks: Synthesis and Characterization

    Egger, P., Trimmel, G., Schlögl, S. & Rossegger, E., 2024.

    Research output: Contribution to conference › Poster › Research

  51. Published

    Effects of Printing Direction and Multi-material on Hardness of Additively Manufactured Thermoplastic Elastomers for Comfortable Orthoses and Prostheses

    Michalec, P., Varsavas, S. D., Arbeiter, F., Weidner, R. & Faller, L.-M., 2024, Additive Manufacturing in Multidisciplinary Cooperation and Production. Drstvensek, I., Pal, S. & Ihan Hren, N. (eds.). Cham: Springer International Publishing, p. 33-41 9 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  52. Published

    Einfluss des Rezyklat-Anteils und des Spannungsverhältnisses auf das Risswachstumsverhalten eines HDPE Blasform Typs

    Schulhofer, B., 2024

    Research output: Thesis › Master's Thesis

  53. Published

    Einfluss von Farb-Masterbatches auf adhäsive, elektrische sowie flammhemmende Eigenschaften ausgewählter technischer Thermoplaste

    Wehinger, P., 2024

    Research output: Thesis › Master's Thesis

  54. Published

    Entwicklung von auf Magnesiumhydroxid basierenden flammgeschützten hochviskosen Polypropylencompounds für Lüftungsrohre

    Sartori, M., 2024

    Research output: Thesis › Master's Thesis

  55. Published

    Environmental impact assessment of a car door panel using recycled carbon fibers: Relevance of different life stages and influence of modelling choices

    Kirschnick, U., Duchamp, B. & Fick, G., 2024, p. 56. 62 p.

    Research output: Contribution to conference › Paper › peer-review

  56. Published

    Ermittlung der Gelzeit mittels Nahinfrarotspektroskopie in der lösungsmittelfreien Prepreg Herstellung

    Schmid, S., 2024

    Research output: Thesis › Master's Thesis

  57. Published

    Estimating Microscopic Defect Size from Mode I, Mode II, and Mixed Mode I/II Interlaminar Delamination Propagation in GFRP and CFRP Laminates under Quasi-static Loads

    Brunner, A. J., Gfrerrer, M., Koss, V. & Pinter, G., 2024, Proceedings of the 24th European Conference on Fracture.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  58. Published

    Evaluierung des Einsatzes von Spritzgießsimulation zur Vorhersage der Maßstreuungen von Kunststoffformteilen

    Schedler, M., 2024

    Research output: Thesis › Master's Thesis

  59. Published

    Fabrication of multi-material dielectric elastomer actuators with the additive manufacturing process of material extrusion

    Beier, P., 2024

    Research output: Thesis › Master's Thesis

  60. Published

    Failure of orthogonal woven composites

    Pettinger, M., 2024

    Research output: Thesis › Master's Thesis

  61. Published

    Flexible und biobasierte Epoxidharzsysteme: Entwicklung, Optimierung und Anwendung in hybriden Werkstoffen

    Schwaiger, M., 2024

    Research output: Thesis › Doctoral Thesis

  62. Published

    Herstellung von Farbmasterbatches mit unterschiedlichen Trägermaterialien für die weitere Verwendung bei der Produktion von PET-Folien und -Platten

    Maurer, C., 2024

    Research output: Thesis › Master's Thesis

  63. Published

    Influence of binder compositions, solvents, and material extrusion parameters on aluminum additive manufacturing via SDS

    Hufnagl, M., 2024

    Research output: Thesis › Master's Thesis

  64. Published

    Influence of Carbon Material Properties on Slag-Foaming Dynamics in Electric Arc Furnaces: A Review

    Kieush, L. & Schenk, J., 2024, In: Steel research international. ??? Stand: 11. Februar 2025, ??? Stand: 11. Februar 2025

    Research output: Contribution to journal › Review article › peer-review

  65. Published

    Influence of Different Manufacturing Methods and Conditions on the Fatigue Behavior of Nitrile Butadiene Rubber

    Gehling, T., 2024

    Research output: Thesis › Doctoral Thesis

  66. Published

    Influence of Process Parameters on Interfacial Adhesion, Mechanical and Thermomechanical Properties of Glass Fiber Reinforced Epoxy Resin in Printed Circuit Boards

    Obwaller, R., 2024

    Research output: Thesis › Master's Thesis

  67. Published

    INLINE PROCESS MONITORING AND FAILURE MANAGEMENT CONCEPT FOR ATL

    Yadav, N., Schledjewski, R. & Fauster, E., 2024, Proceedings of the 21st European Conference on Composite Materials: Volume 5 - Manufacturing. p. 497-502 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  68. Published

    Inline Process Monitoring Using Near-Infrared Spectroscopy in Liquid Composite Molding Processes: Measurement and Analysis of Critical Parameters in Epoxy/Amine Resin Systems

    Salzmann, M. L., 2024

    Research output: Thesis › Doctoral Thesis

  69. Published

    Introduction to Additive Manufacturing

    Godec, D., Pilipović, A., Breški, T., Ureña, J., Jordá, O., Martínez, M., Gonzalez-Gutierrez, J., Schuschnigg, S., Blasco, J. R. & Portolés, L., 2024, Springer Tracts in Additive Manufacturing. Springer Nature, p. 1-44 44 p. (Springer Tracts in Additive Manufacturing; vol. Part F3252).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  70. Published

    Investigating Hydrogen Diffusion in Filled Polymers with Simple Geometries: An ABAQUS Simulation Study

    Graf, A. L., 2024

    Research output: Thesis › Master's Thesis

  71. Published

    Isothermal and Non-Isothermal DSC Analysis towards the Formulation of a Low-Temperature Curing Epoxy-Alcohol Resin

    Lang, J., 2024

    Research output: Thesis › Master's Thesis

  72. Published

    Material data determination of liquid silicone rubber: characterization methods for a reliable injection moulding simulation

    Azevedo de Freitas, M., 2024

    Research output: Thesis › Doctoral Thesis

  73. Published

    Material Selection and Process Development of Droplet Based Additive Manufacturing for Medical Implants

    Hentschel, L., 2024

    Research output: Thesis › Doctoral Thesis

  74. Published

    Modification of PTFE particles towards anion conducting properties

    Sydor, B., 2024

    Research output: Thesis › Master's Thesis

  75. Published

    Nanoindentation of polymers

    Christöfl, P., 2024

    Research output: Thesis › Doctoral Thesis

  76. Published

    New debonding on-demand concepts for the repair and disassembly of adhesively-bonded structures

    Sabatino, F. A., Gleirscher, M., Alabiso, W., Sölle, B., Rossegger, E. & Schlögl, S., 2024.

    Research output: Contribution to conference › Poster › Research

  77. Published

    On the Potential of Epoxy Binder Rovings in Automated Dry Fiber Filament Winding

    Neunkirchen, S., 2024

    Research output: Thesis › Doctoral Thesis

  78. Published

    Optimization of toughness in materials with propagating and reinitiating cracks

    Rettl, M., 2024

    Research output: Thesis › Doctoral Thesis

  79. Published

    Orthogonal Photoreactions for the Realization of Multifunctional Photopolymers

    Müller, S. M., 2024

    Research output: Thesis › Doctoral Thesis

  80. Published

    PLASMA MODIFICATION OF POLYACRYLONITRILE POWDER OR SOLUTION PRIOR ELECTROSPINNING

    Pijáková, B., Elbataioui, A., Rafailovic, L., Bautista, A. D., Schlögl, S., Dvořáková, E., Mühlbacher, I. & Ráheľ, J., 2024, NANOCON 2023 - 15th International Conference on Nanomaterials - Research and Application, Conference Proceedings. p. 154-159 6 p. (NANOCON Conference Proceedings - International Conference on Nanomaterials).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  81. Published

    Polylactic Acid (PLA) as Backbone for the Fused Filament Fabrication (FFF) of Aluminium

    Kukla, C., Momeni, V., Schuschnigg, S. & Holzer, C., 2024, Proceedings - Euro PM 2024 Congress and Exhibition. (Proceedings - Euro PM 2024 Congress and Exhibition).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  82. Published

    Reformable bio-based thiol-ene vitrimers for nanoimprint lithography: enhanced covalent adaptability for adjustable surface properties

    Uher, J. M., Sölle, B., Reisinger, D., Sölle, B., Heupl, S., Jelinek, A., Schlögl, S. & Rossegger, E., 2024.

    Research output: Contribution to conference › Poster › Research

  83. Published

    Sequential surface modification of activated carbon

    Pustahija, L., 2024

    Research output: Thesis › Doctoral Thesis

  84. Published

    Single and Multi-material Topology Optimization of Continuum Structures: ABAQUS Plugin

    Patel, D., Rockenbauer, T., Schlögl, S. & Lang, M., 2024, Mathematical Modeling in Physical Sciences - 12th IC-MSQUARE, 2023. Vlachos, D. (ed.). Springer, p. 3-17 15 p. (Springer Proceedings in Mathematics and Statistics; vol. 446).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  85. Published

    Spherulite Growth and Crystallization Kinetics of Polypropylene and its blends

    Jacobs, A., 2024

    Research output: Thesis › Master's Thesis

  86. Published

    Surface modification of thiol-ene based polymers for the development of microfluidic devices

    Maier, J., Salehi Siouki, S., Schlögl, S. & Griesser, T., 2024.

    Research output: Contribution to conference › Poster › Research

  87. Published

    Surface modification with germanium-based photoinitiators and surface-mediated photopolymerization techniques

    Müller, M., 2024

    Research output: Thesis › Doctoral Thesis

  88. Published

    Sustainably multifunctional coating design for battery safety applications based on dynamic chemistry

    Hoang, K., Bautista, A. D. & Schlögl, S., 2024.

    Research output: Contribution to conference › Poster › Research

  89. Published

    Synthesis and characterization of covalent adaptive networks based on thiol-thioester exchange reactions

    Egger, P., Trimmel, G., Schlögl, S. & Rossegger, E., 2024.

    Research output: Contribution to conference › Poster › Research

  90. Published

    Synthesis and characterization of ionic liquid-based epoxides for advanced applications

    Wanghofer, F., 2024

    Research output: Thesis › Doctoral Thesis

  91. Published

    Synthesis of stimuli-responsive polymers for the preparation of complex 3D objects with spatially resolved functionalities

    Cazin, I., 2024

    Research output: Thesis › Doctoral Thesis

  92. Published

    Umgebungsbedingte Spannungsrissbildung in Polyethylen: Analyse verschiedener Testmethoden

    Ladinig, A., 2024

    Research output: Thesis › Master's Thesis

  93. Published

    Understanding high-temperature plasticity in silicon

    Schaffar, G. J. K., Tscharnuter, D. & Maier-Kiener, V., 2024.

    Research output: Contribution to conference › Poster › Research › peer-review

  94. Published

    Untersuchung bio-basierter Alkohole als Thermostabilisatoren in der PVC-Verarbeitung

    Eigruber, P., 2024

    Research output: Thesis › Master's Thesis

  95. Published

    Virtual Optimization of 3D Printed Structures with Tailored Mechanical and Functional Properties

    Thalhamer, A., 2024

    Research output: Thesis › Doctoral Thesis

  96. Published

    Wareneingangskontrolle von rezyklierten und Neuware-Polypropylenen mittels Folienextrusion

    Wögerbauer, V., 2024

    Research output: Thesis › Master's Thesis

  97. 2023
  98. E-pub ahead of print

    Biobased Vitrimeric Epoxy Networks

    Sangermano, M., Bergoglio, M. & Schlögl, S., 24 Dec 2023, (E-pub ahead of print) In: Macromolecular materials and engineering. 309.2024, 9, 12 p., 2300371.

    Research output: Contribution to journal › Review article › peer-review

  99. Published

    Effect of Binder Activation on in-Plane Capillary Flow in Multilayer Stacks of Carbon Fiber Fabrics

    Neunkirchen, S., Bender, M. & Schledjewski, R., 21 Dec 2023, In: Applied composite materials. 31.2024, April, p. 709-719 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  100. Published

    The use of a sulfonium-based photoacid generator in thiol-ene photopolymers for the controlled activation of transesterification through chemical amplification

    Alabiso, W., Li, Y., Brancart, J., Van Assche, G., Rossegger, E. & Schlögl, S., 16 Dec 2023, In: Polymer Chemistry. 15.2024, 4, p. 321-331 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  101. E-pub ahead of print

    Experimental validation of a new adaptable LCM mold filling software

    Obertscheider, C., Fauster, E. & Stieber, S., 12 Dec 2023, (E-pub ahead of print) In: Advanced Manufacturing: Polymer and Composites Science. 9.2023, 1, 19 p., 2282310.

    Research output: Contribution to journal › Article › Research › peer-review

  102. Published

    Maßgeschneiderte Sanierungsverfahren für die Tunnelentwässerung - "DrainRepair": Teil 2: Ergebnisbericht

    Arbeiter, F., Schachinger, T., Wenighofer, R., Rieß, G., Steiner, M., Micic Batka, V., Griebaum, M., Laufer, V. & Galler, R., 7 Dec 2023, In: Berg- und hüttenmännische Monatshefte : BHM. 168.2023, 12, p. 566-571 5 p.

    Research output: Contribution to journal › Article › Research

Previous 1 2 3 4 5 6 7 8 ...42 Next
View graph of relations

Contact information

Otto Glöckel-Straße 2, 8700 Leoben
  • Main phone number: +43 3842 402 2301