Chair of Mechanics (400)

Organisational unit: Chair

301 - 400 out of 809Page size: 100

Research output

  1. 2015
  2. Published

    3D numerical study on microwave induced stresses in inhomogeneous hard rocks

    Toifl, M., Meisels, R., Hartlieb, P., Kuchar, F. & Antretter, T., 2015.

    Research output: Contribution to conference › Paper

  3. Published

    Degradation analysis of thin die-attach layer under cyclic thermal load in microelectronics packaging

    Pelisset, T. M. A., 2015

    Research output: Thesis › Doctoral Thesis

  4. Published

    Degradation of the electrical performance of Printed Circuit Boards (PCBs) after cyclic thermo-mechanical loading

    Fellner, K., 2015

    Research output: Thesis › Doctoral Thesis

  5. Published

    Elucidating the Sorption Mechanism of Dibromomethane in Disordered Mesoporous Silica Adsorbents

    Stoeckel, D., Wallacher, D., Zickler, G., Thommes, M. & Smarsly, B., 2015, In: Langmuir.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Experimental characterization and modelling of triaxial residual stresses in straightened railway rails

    Kaiser, R., Stefenelli, M., Hatzenbichler, T., Antretter, T., Hofmann, M., Keckes, J. & Buchmayr, B., 2015, In: The Journal of Strain Analysis for Engineering Design. 50, 3, p. 190-198 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Generalized Gaussian Error Functions and their Applications

    Dirschmid, H. & Fischer, F. D., 2015, In: Acta mechanica. 226, p. 2887 2897 p.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Growth and shrinkage of particles in slags

    Gamsjäger, E., Kircher, V. & Harmuth, H. (Co-editor), 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  9. Published

    Influence of the microstructure on rock damage during microwave irradiation: a 3D numerical analysis

    Toifl, M., Meisels, R., Hartlieb, P., Kuchar, F. & Antretter, T., 2015, Proceedings of Eurock 2015. Schubert, W. & Kluckner, A. (eds.). p. 731-736

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. Published

    Influence of the microstructure on rock damage during microwave irradiation: A 3D numerical analysis

    Toifl, M., Meisels, R., Hartlieb, P., Kuchar, F. & Antretter, T., 2015, Future Development of Rock Mechanics: Proceedings of the SRM Regional Symposium EUROCK 2015 & 64th Geomechanics Colloquium. Schubert, W. & Kluckner, A. (eds.). Salzburg: Österreichische Gesellschaft für Geomechanik, p. 731-736

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  11. Published

    Influence of the microstructure on rock damage during microwave irradiation: A 3D numerical analysis

    Toifl, M., Meisels, R., Hartlieb, P., Kuchar, F. & Antretter, T., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  12. Published

    Influence of the vehicle-track parameters on the crack growth in rails

    Kracalik, M., 2015

    Research output: Thesis › Doctoral Thesis

  13. Published

    Kinetics of Interstitial Segregation in Cottrell Atmospheres and Grain Boundaries

    Svoboda, J., Zickler, G., Kozeschnik, E. & Fischer, F. D., 2015, In: Philosophical magazine : Letters. 95, p. 458 465 p.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Microwave absorption and its thermo-mechanical consequences in heterogeneous rocks

    Toifl, M., Meisels, R., Hartlieb, P., Kuchar, F. & Antretter, T., 2015, Geomechanics from Micro to Macro - Proceedings of the TC105 ISSMGE International Symposium on Geomechanics from Micro to Macro, IS-Cambridge 2014. Vol. 2. p. 1545-1550 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  15. Published

    Microwave propagation and absorption and its thermo-mechanical consequences in heterogeneous rocks

    Meisels, R., Toifl, M., Hartlieb, P., Antretter, T. & Kuchar, F., 2015, In: International Journal of Mineral Processing. 135, p. 40-51

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Multi-scale modeling of bainitic phase transformation in multi-variant polycrystalline low alloy steels

    Mahnken, R., Schneidt, A., Antretter, T., Ehlenbröker, U. & Wolff, M., 2015, In: International journal of solids and structures. 54, p. 156-171

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Relaxation of a Precipitate Misfit Stress State by Creep in the Matrix

    Fischer, F. D., Svoboda, J., Antretter, T. & Kozeschnik, E., 2015, In: International journal of plasticity. 64, p. 164-176

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Simulation des thermomechanischen Verhaltens von Grobblechen während der Schnellkühlung

    Eßl, W., Antretter, T. & Parteder, E., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  19. Published

    Simulation of the packaging process of embedded components in printed circuit boards

    Macurova, K., 2015

    Research output: Thesis › Doctoral Thesis

  20. Published

    Size effects in residual stress formation during quenching of cylinders made of hot-work tool steel

    Schemmel, M., Prevedel, P., Schöngrundner, R., Ecker, W. & Antretter, T., 2015, In: Advances in Materials Science and Engineering. 7 p., 678056.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Stress and Deflection Development During Die Embedding into Printed Circuit Boards

    Macurova, K., Angerer, P., Bermejo, R., Pletz, M., Schöngrundner, R., Antretter, T., Krivec, T., Morianz, M., Brizoux, M. & Lecavelier, A., 2015, In: Materials Today: Proceedings. 2, 2, p. 4196-4205 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    The influence of a brittle Cr interlayer on the Deformation behavior of thin Cu films on flexible substrates: Experiment and Model

    Marx, V. M., Toth, F., Wiesinger, A., Berger, J., Kirchlechner, C., Cordill, M., Fischer, F. D., Rammerstorfer, F. G. & Dehm, G., 2015, In: Acta materialia. 89, p. 278-289

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    The kinetics of diffusive phase transformations in the light of trans-interface diffusion

    Gamsjäger, E. & Rettenmayr, M., 2015, In: Philosophical magazine. 95:26, p. 2851-2865

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Thermo-kinetic modeling of Mg-Si couple formation as a precursor to precipitation in Al-Mg-Si

    Shan, Y. V., Svoboda, J., Fischer, F. D. & Kozeschnik, E., 2015, Proceedings of the International Conference on Solid-Solid Phase Transformations in Inorganic Materials. TMS, p. 883 884 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  25. Published

    The rock cutting process of road headers - Overview of laboratory tests and numerical simulation

    Pittino, G., Galler, R., Mikl-Resch, M. J., Tichy, R., Ecker, W., Antretter, T., Gimpel, M. & Kargl, H., 2015, Future Development of Rock Mechanics: Proceedings of the ISRM Regional Symposium Eurock 2015 & 64th Geomechanics Colloquium. Schubert, W. & Kluckner, A. (eds.). Salzburg: Eigenverlag, p. 243-248 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  26. Published

    Versagen von feuerverzinkten Stahlbauteilen

    Panzenböck, M., Mendez Martin, F., Rashkova, B., Schütz, P. & Kaiser, R., 2015, Sonderbänder der praktischen Metallographie 47. p. 203-208

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. Published

    Versagen von feuerverzinkten Stahlbauteilen - Gefüge und Versagen von Werkstoffen

    Panzenböck, M., Mendez Martin, F., Rashkova, B., Schütz, P., Kaiser, R., Spiradek-Hahn, K. & Brabetz, M., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  28. Published

    Verzerrungsanalyse räumlich gekrümmter Flächen auf Basis konformer Abbildungsalgorithmen

    Ritt, R., 2015

    Research output: Thesis › Master's Thesis

  29. Published

    Voraussage von wachstumsfähigen Squats ausgehend von einer Fehlstelle im Randbereich der Fahrspur einer Schiene

    Kubin, W., 2015, 73 p.

    Research output: Thesis › Diploma Thesis

  30. 2014
  31. Published

    Modelling the role of compositional fluctuations in nucleation kinetics

    Ženíšek, J., Kozeschnik, E., Svoboda, J. & Fischer, F. D., 31 Jul 2014, In: Acta materialia. 91, p. 355-376

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Rolling Contact Fatigue of Three Crossing Nose Materials—Multiscale FE Approach

    Pletz, M., Daves, W., Yao, W. & Ossberger, H., 15 Jun 2014, In: Wear. 314, 1–2, p. 69-77 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Determination of Substitutional-Interstitial Interaction from Chemical Potentials of Interstitials in the Steel Matrix

    Shan, Y. V., Svoboda, J., Fischer, F. D. & Kozeschnik, E., May 2014, In: Advanced materials research. 922, p. 645-650

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    The role of phase interface energy in martensitic transformation: A lattice Monte-Carlo simulation

    Yastrebov, V. A., Fischlschweiger, M., Cailletaud, G. & Antretter, T., Mar 2014, In: Mechanics Research Communications. 56, p. 37-41

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Comparison of different methods for stress and deflection analysis in embedded die packages during the assembly process

    Macurova, K., Bermejo Moratinos, R., Pletz, M., Schöngrundner, R., Antretter, T., Krivec, T., Morianz, M., Brizoux, M. & Lecavelier, A., 1 Jan 2014, Proceedings - 2014 47th International Symposium on Microelectronics, IMAPS 2014. p. 355-360 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    Abnormal Grain Growth: A Non-Equilibrium Thermodynamic Model for Multi-Grain Binary Systems

    Svoboda, J. & Fischer, F. D., 2014, In: Modelling and simulation in materials science and engineering. 22, p. 015013-1-015013-15

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Accelerated cooling of heavy steel plates - selected aspects of modelling

    Kaltenbrunner, T., 2014

    Research output: Thesis › Diploma Thesis

  38. Published

    An Easy-to-Use Estimate of the Energy-Release Rate for Crack Arrays

    Fischer, F. D., Predan, J. & Kienzler, R., 2014, In: Archive of applied mechanics. 84, p. 1325-1337

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Application of the cyclic phase transformation concept for determining the effective austenite/ferrite interface mobility

    Gamsjäger, E., Chen, H. & van der Zwaag, S., 2014, In: Computational materials science. 83, p. 92-100

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Characterization and modeling of the AuSnCu thin solder joint under thermal cycling

    Pélisset, T., Karunamurthy, B., Otremba, R. & Antretter, T., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  41. Published

    Characterization and modeling of the AuSnCu thin solder joint under thermal cycling

    Antretter, T., Otremba, R., Karunamurthy, B. & Pélisset, T., 2014, Proceedings of the 15th International Conference on Thermal, Mechanical & Multi-Physics Simulation and Experiments in Microelectronics and Microsystems EuroSimE 2014.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. Published

    Characterization and Modeling of the Thermomechanical Fatigue Behavior of Brake Disks for High Speed Trains

    Raninger, P., 2014

    Research output: Thesis › Doctoral Thesis

  43. Published

    Chemically Induced Fracturing in Alkali Feldspar

    Scheidl, K. S., Schaeffer, A.-K., Petrishcheva, E., Habler, G., Fischer, F. D., Schreuer, J. & Abart, R., 2014, In: Physics and Chemistry of Minerals. 41, p. 1-16

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Coherent Analysis of Disordered Mesoporous Adsorbents using Small Angle X-Ray Scattering and Physisorption Experiments

    Stoeckel, D., Wallacher, D., Zickler, G., Perlich, J., Tallarek, U. & Smarsly, B., 2014, In: Physical chemistry, chemical physics : PCCP. 16, p. 6583-6592

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Computational simulation of instability phenomena in nanoparticles and nanofilms

    Todt, M., Toth, F., Hartmann, M., Holec, D., Cordill, M. J., Fischer, F. D. & Rammerstorfer, F. G., 2014, In: Computational Technology Reviews. 10, p. 89-119

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Critical assessment of the determination of residual stress profiles in thin films by means of the ion beam layer removal method

    Schöngrundner, R., Treml, R., Antretter, T., Kozic, D., Ecker, W. & Kiener, D., 2014, In: Thin solid films. p. 321-330

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Determination of cyclic mechanical properties of thin copper layers for PCB applications

    Fellner, K., Fuchs, P. F., Antretter, T., Pinter, G. & Schöngrundner, R., 2014, Proceedings 15th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  48. Published

    Determination of Depths of Multiple Traps for Interstitials and their Influence on Diffusion Kinetics

    Svoboda, J., Shan, Y. V., Kozeschnik, E. & Fischer, F. D., 2014, In: Modelling and simulation in materials science and engineering. 22, p. 065015-1-16

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Diffusion of elements and vacancies in multi-component systems

    Fischer, F. D. & Svoboda, J., 2014, In: Progress in materials science. 60, p. 338-367

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Estimation of Thermodynamic Data of Metallic Nanoparticles Based on Bulk Values

    Vollath, D. & Fischer, F. D., 2014, Metal Nanopowders: Production, Characterization, and Energetic Applications. p. 1-24

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  51. Published

    Evaluation of the residual stress distribution in thin films by means of the ion beam layer removal method

    Kozic, D., Treml, R., Schöngrundner, R., Brunner, R., Kiener, D., Antretter, T. & Gänser, H.-P., 2014, Proceedings of the 15th International Conference on Thermal, Mechanical & Multi-Physics Simulation and Experiments in Microelectronics and Microsystems EuroSimE 2014. Zhang, G. Q., Van Driel, W. D., Rodgers, P., Bailey, C. & de Saint Leger, O. (eds.). Institute of Electrical and Electronics Engineers, 6813785

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  52. Published

    FE - simulation of chip formation in inhomogeneous materials

    Distlberger, S., 2014, 144 p.

    Research output: Thesis › Diploma Thesis

  53. Published

    Formation of Bubbles by Hydrogen Attack and Elastic-Plastic Deformation of the Matrix

    Fischer, F. D. & Svoboda, J., 2014, In: International journal of plasticity. 63, p. 110-123

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    Generalization of the Lifshitz–Slyozov–Wagner Coarsening Theory to Non-dilute Multi-component Systems

    Svoboda, J. & Fischer, F. D., 2014, In: Acta materialia. 79, p. 304-314

    Research output: Contribution to journal › Article › Research › peer-review

  55. Published

    Growth limit of carbon onions – A continuum mechanical study

    Todt, M., Bitsche, R. D., Hartmann, M., Fischer, F. D. & Rammerstorfer, F. G., 2014, In: International journal of solids and structures. 51, p. 706-715

    Research output: Contribution to journal › Article › Research › peer-review

  56. Published

    Kinetics of the Austenite-to-Ferrite Phase Transformation - Simulations and Experiments

    Gamsjäger, E., Werner, R., Schiller, W. & Buchmayr, B., 2014, In: Steel research international. p. 131-142

    Research output: Contribution to journal › Article › Research › peer-review

  57. Published

    Mechanik und Thermodynamik der Werkstoffe

    Gamsjäger, E., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  58. Published

    Method development for the cyclic characterization of thin copper layers for PCB applications

    Fellner, K., Fuchs, P. F., Pinter, G., Antretter, T. & Krivec, T., 2014, In: Circuit World. 40, p. 53-60

    Research output: Contribution to journal › Article › Research › peer-review

  59. Published

    Modeling the Accelerated Cooling Process in Heavy Steel Plate Production

    Essl, W., 2014

    Research output: Thesis › Doctoral Thesis

  60. Published

    Modelling of phase transformations and residual stress formation in hot-work tool steel components

    Schemmel, M., Prevedel, P., Schöngrundner, R., Ecker, W. & Antretter, T., 2014, European Conference of Heat Treatment and 21st IFHTSE Congress. p. 285-292

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  61. Published

    Modelling of thin film buckling in compound specimens under uniaxial stretching

    Toth, F., Rammerstorfer, F. G., Cordill, M. J. & Fischer, F. D., 2014, Shell Structures: Theory and Applications - Proceedings of the 10th SSTA 2013 Conference. p. 247-250 4 p. (Shell Structures: Theory and Applications - Proceedings of the 10th SSTA 2013 Conference; vol. 3).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  62. Published

    Numerical analysis of a multivariant martensitic phase transformation in nanostructured NiTi considering elastic anisotropy

    Petersmann, M., 2014

    Research output: Thesis › Diploma Thesis

  63. Published

    Numerical analysis of the rock cutting and the loading of rock cutting tools

    Mikl-Resch, M. J., 2014

    Research output: Thesis › Doctoral Thesis

  64. Published

    Phase transformations in steels - from in-situ experiments to thermodynamically based models

    Gamsjäger, E., 2014, Proceedings of the 8th European continuous casting conference. p. 116-123

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  65. Published

    Pilgerwalzwerk: Einblicke in den Walzprozess durch die Anwendung der Finite Elemente Methode

    Ragger, K., Kaiser, R., Paal, J., Fluch, R. & Buchmayr, B., 2014, In: Kalibreur. p. 28-41

    Research output: Contribution to journal › Article › Research › peer-review

  66. Published

    Simulation of stress distribution in assembled silicon dies and deflection of printed circuit boards

    Macurova, K., Angerer, P., Antretter, T., Bermejo Moratinos, R., Maia, W., Schöngrundner, R., Krivec, T., Morianz, M. & Brizoux, M., 2014, Proceedings of the 15th International Conference on Thermal, Mechanical & Multi-Physics Simulation and Experiments in Microelectronics and Microsystems EuroSimE 2014.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  67. Published

    Simulation of the roller straightening process with respect to residual stresses and the curvature trend

    Kaiser, R., Hatzenbichler, T., Buchmayr, B. & Antretter, T., 2014, International Conference on Residual Stresses 9 (ICRS 9). p. 456-463

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  68. Published

    The Influence of Chemistry on the Kirkendall Effect during Grain Boundary Interdiffusion

    Svoboda, J., Fischer, F. D., Klinger, L. & Rabkin, E., 2014, In: Philosophical magazine. 94, p. 3398-3412

    Research output: Contribution to journal › Article › Research › peer-review

  69. Published

    Thermodynamic Extremal Principles for Irreversible Processes in Materials Science

    Fischer, F. D., Svoboda, J. & Petryk, H., 2014, In: Acta materialia. 67, p. 1-20

    Research output: Contribution to journal › Article › Research › peer-review

  70. Published

    Two-Dimensional Simulation of Reactive Diffusion in Binary Systems

    Svoboda, J., Stopka, J. & Fischer, F. D., 2014, In: Computational materials science. 95, p. 309-315

    Research output: Contribution to journal › Article › Research › peer-review

  71. 2013
  72. Published

    Physicochemical basis for water-actuated movement and stress generation in nonliving plant tissues

    Bertinetti, L., Fischer, F.-D. & Fratzl, P., 5 Dec 2013, In: Physical review letters. 111.2013, 23, 5 p., 238001.

    Research output: Contribution to journal › Article › Research › peer-review

  73. Published

    Multi-physics simulation of the component attachment within embedding process

    Macurova, K., Kharicha, A., Pletz, M., Mataln, M., Bermejo, R., Schongrundner, R., Krivec, T., Antretter, T., Maia, W., Morianz, M. & Brizoux, M., 1 Apr 2013, 14th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2013. Institute of Electrical and Electronics Engineers, p. 1-6 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  74. Published

    An Efficient Algorithm for Modeling the Thermo-Mechanical Material Response of Havy Steel Plates during Accelerated Cooling

    Eßl, W., Antretter, T. & Parteder, E., 2013, Key engineering materials. Vol. 554-557. p. 749-763 (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  75. Published

    A New Computational Treatment of Reactive Diffusion in Binary Systems

    Svoboda, J. & Fischer, F. D., 2013, In: Computational materials science. 78, p. 39-46

    Research output: Contribution to journal › Article › Research › peer-review

  76. Published

    A new roughness parameter to evaluate the near-surface deformation in dry rolling/sliding contact

    Kubin, W. K., Pletz, M., Daves, W. & Scheriau, S., 2013, In: Tribology International. 67, p. 132-139

    Research output: Contribution to journal › Article › Research › peer-review

  77. Published

    A Variational Approach to Grooving and Wetting

    Hackl, K., Fischer, F. D., Klevakina, K., Renner, J. & Svoboda, J., 2013, In: Acta materialia. 61, p. 1581-1591

    Research output: Contribution to journal › Article › Research › peer-review

  78. Published

    Determination of Depths of Interstitial Traps from Thermodynamic Data – A New View on Carbon Trapping and Diffusion

    Svoboda, J., Shan, Y. V., Kozeschnik, E. & Fischer, F. D., 2013, In: Modelling and simulation in materials science and engineering. 21, p. 065012-1-15

    Research output: Contribution to journal › Article › Research › peer-review

  79. Published

    Development and testing of a technique for the simulation of the rock cutting process

    Mikl, M. J., Tichy, R., Ecker, W., Antretter, T. & Pittino, G., 2013, Proceedings of Research and Applications in Structural Engineering, Mechanics and Computation. p. 505-510 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  80. Published

    Diffusive and massive phase transformations in Ti-Al-Nb alloys - Modelling and experiments

    Gamsjäger, E., Liu, Y., Rester, M., Puschnig, P., Draxl, C., Clemens, H., Dehm, G. & Fischer, F. D., 2013, In: Intermetallics. 38, p. 126-138

    Research output: Contribution to journal › Article › Research › peer-review

  81. Published

    Elastic Properties of Graphene Obtained by Computational Mechanical Tests

    Hartmann, M., Todt, M., Rammerstorfer, F. G., Fischer, F. D. & Paris, O., 2013, In: Europhysics Letters. 103, p. 68004-p1-68004-p6

    Research output: Contribution to journal › Article › Research › peer-review

  82. Published

    Elastoplastic Buckling as Source of Misinterpretation of Micropillar-Tests

    Daum, B., Dehm, G., Clemens, H., Rester, M., Fischer, F. D. & Rammerstorfer, F. G., 2013, In: Acta materialia. 61, p. 4996-5007

    Research output: Contribution to journal › Article › Research › peer-review

  83. Published

    Entwicklung eines Delaminierungsmodells einer SOFC

    Toifl, M., 2013

    Research output: Thesis › Diploma Thesis

  84. Published

    Entwicklung und Test einer Methode zur Simulation des Gesteinsschneidens mit der Finiten Elemente Methode

    Mikl, M. J., Tichy, R., Ecker, W., Antretter, T., Gimpel, M., Kargl, H., Pittino, G. & Galler, R., 2013, In: Berg- und hüttenmännische Monatshefte : BHM. p. 507-513

    Research output: Contribution to journal › Article › Research › peer-review

  85. Published

    ERC

    Fischer, F. D. (Reviewer), 2013, 34 p.

    Research output: Other contribution › Transfer › peer-review

  86. Published

    Formation of Multiple Stoichiometric Phases in Binary Systems by Combined Bulk and Grain Boundary Diffusion – Experiments and Model

    Fischer, F. D., Svoboda, J. & Schillinger, W., 2013, In: Acta materialia. 61, p. 32-39

    Research output: Contribution to journal › Article › Research › peer-review

  87. Published

    Hao Chen: Cyclic partial phase transformation in low alloyed steels: Ph. D. thesis, Theoretical, Experimental, Basic - Fundamental (Grundlagenforschung)

    Gamsjäger, E. (Reviewer), 2013

    Research output: Other contribution › Transfer › peer-review

  88. Published

    Influence of different microstructures of the welding zone on the fatigue crack growth behaviour of HSLA steels

    Maier, B., Guster, C., Tichy, R. & Ecker, W., 2013, 13th International Conference on Fracture - Abstract Book. p. 211-211

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  89. Published

    In-situ Beobachtung von Phasenumandlungen in Stählen

    Schider, S., Gamsjäger, E., Michelic, S. & Bernhard, C., 2013, Prakt. Met. Sonderband 45. p. 139-144

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  90. Published

    In situ observation of austenite–ferrite interface migration in a lean Mn steel during cyclic partial phase transformations

    Chen, H., Gamsjäger, E., Schider, S., Khanbareh, H. & van der Zwaag, S., 2013, In: Acta materialia. 61, p. 2414-2424

    Research output: Contribution to journal › Article › Research › peer-review

  91. Published

    Interstitial Diffusion in Systems with Multiple Sorts of Traps

    Fischer, F. D., Svoboda, J. & Kozeschnik, E., 2013, In: Modelling and simulation in materials science and engineering. 21, p. 025008-1-13

    Research output: Contribution to journal › Article › Research › peer-review

  92. Published

    Maximum Dissipation Crystal Plasticity - an approach to select active slip systems

    Orthaber, M., Antretter, T. & Gänser, H.-P., 2013, CM13: Proceedings of the International Conference on Computational Mechanics. p. ---

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  93. Published

    Modelling the role of surface stress on the kinetics of tissue growth in confined geometries

    Gamsjäger, E., Bidan, C. M., Fischer, F. D., Fratzl, P. & Dunlop, J. W., 2013, In: Acta biomaterialia. 9, p. 5531-5543

    Research output: Contribution to journal › Article › Research › peer-review

  94. Published

    Numerical Simulations in the field of Geotechnics and Underground Engineering - Examples of Research and Development Projects

    Galler, R., Volderauer, C., Marcher, T., Kargl, H., Gimpel, M., Mikl, M., Ecker, W., Tichy, R., Antretter, T., Gschwandtner, G., Pittino, G., Entacher, M., Lorenz, S., Schuller, E. & Mödlhammer, H., 2013, In: Berg- und hüttenmännische Monatshefte : BHM. p. 189-197

    Research output: Contribution to journal › Article › Research › peer-review

  95. Published

    On the selection of active slip systems in rate independent crystal plasticity

    Orthaber, M., Antretter, T. & Gänser, H.-P., 2013, Key engineering materials. Vol. 554-557. p. 1147-1156 (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  96. Published

    Physico-Chemical Basis for Water Actuated Movement and Stress Generation in Non Living Plant Tissues

    Bertinetti, L., Fischer, F. D. & Fratzl, P., 2013, In: Physical review letters. 111, p. 238001-1-5

    Research output: Contribution to journal › Article › Research › peer-review

  97. Published

    Role of Vacancies in Work Hardening and Fatigue of TiAl Alloys

    Appel, F., Herrmann, D., Fischer, F. D., Svoboda, J. & Kozeschnik, E., 2013, In: International journal of plasticity. 42, p. 83-100

    Research output: Contribution to journal › Article › Research › peer-review

  98. Published

    Some Examples for Advanced Numerical Solutions Pushing the Limits of Commercial Software

    Antretter, T., Hasenhütl, E., Eßl, W., Hofmann, A., Ecker, W., Heiss, C., Galler, R. & Parteder, E., 2013, In: Berg- und hüttenmännische Monatshefte : BHM. p. 211-214

    Research output: Contribution to journal › Article › Research › peer-review

  99. Published

    Thermodynamic analysis of solubility data 1: phase diagrams of systems salt hydrate + water

    Gamsjäger, H., Lorimer, J. W. & Gamsjäger, E., 2013, In: Monatshefte für Chemie = Chemical monthly. 144, p. 103-112

    Research output: Contribution to journal › Article › Research › peer-review

  100. Published

    Thermodynamic Modeling of a Phase Transformation in Protein Filaments with Mechanical Function

    Fischer, F. D., Harrington, M. J. & Fratzl, P., 2013, In: New journal of physics. 15, p. 065004-1-16

    Research output: Contribution to journal › Article › Research › peer-review

  101. Published

    Transformation hardening and kinetics for stress assisted and temperature driven transformation in steels

    Fischlschweiger, M., Antretter, T. & Cailletaud, G., 2013, In: Mechanics Research Communications. 47, p. 84-88

    Research output: Contribution to journal › Article › Research › peer-review

  102. 2012
  103. Published

    2D-Modellierung von thermomechanischen Ermüdungsvorgängen in Hochleistungsbremsscheiben für Bahnsysteme

    Schemmel, M., 2012, 91 p.

    Research output: Thesis › Diploma Thesis

  104. Published

    Active slip systems in crystal plasticity and the principle of maximum dissipation

    Orthaber, M., Antretter, T., Gänser, H.-P. & Ecker, W., 2012, Proceeding of the 5th International Conference from Scientific Computing to Computational Engineering. p. 36-41

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Previous 1 2 3 4 5 6 7 8 9 Next
View graph of relations

Contact information

Franz-Josef-Strasse 18/III, 8700 Leoben
  • Main phone number: +43 3842 402 4001