Work hardening in micropillar compression: In situ experiments and modeling

Kiener, D., Guruprasad, P. J., Keralavarma, S. M., Dehm, G. & Benzerga, A. A., 2011, in: Acta materialia. 59, S. 3825-3840

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

3D strain imaging in sub-micrometer crystals using cross-reciprocal space measurements: Numerical feasibility and experimental methodology

Vaxelaire, N., Labat, S., Chamard, V., Thomas, O., Jaques, V., Picca, F., Ravy, S., Kirchlechner, C. & Keckes, J., 2010, in: Nuclear instruments & methods in physics research / B Beam interactions with materials and atoms. S. 388-393

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Absolute concentration of free volume-type defects in ultrafine-grained Fe prepared by high-pressure torsion

Pippan, R., Oberdorfer, B., Lorenzoni, B., Unger, K., Sprengel, W., Zehetbauer, M. & Würschum, R., 2010, in: Scripta materialia. S. 452-455

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Achieving the ideal strength in annealed Molybdenum nanopillars

Lowry, M. B., Kiener, D., Le Blanc, B. B., Chisholm, C., Florando, J. N., Morris, J. W. J. & Minor, A. M., 2010, in: Acta materialia. 58, S. 5160-5167

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Adhesion Energies of Cr Thin Films on Polyimide Determined from Buckling: Experiment and Model

Cordill, M., Fischer, F. D., Rammerstorfer, F. G. & Dehm, G., 2010, in: Acta materialia. 58, S. 5520-5531

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Anisotropic fracture behavior of ultrafine-grained iron

Hohenwarter, A. & Pippan, R., 2010, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 527, S. 2649-2656

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Broadband optoacoustic measurements of ultrasound attenuation in severely plastically deformed nickel

Pippan, R., Kazhushko, V. V., Paltauf, G., Krenn, H. & Scheriau, S., 2010, in: Journal of applied physics. S. 094905-094905

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Bulk Nanostructured Functional Materials By Severe Plastic Deformation

Pippan, R., Zehetbauer, M., Grössinger, R., Krenn, H., Krystian, M., Rogl, P., Waitz, T. & Würschum, R., 2010, in: Advanced engineering materials. S. 692-700

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Can local hot spots induce alpha2/gamma lamellae during incomplete massive transformation of gamma-TiAl alloys?

Fischer, F. D., Cha, L., Dehm, G. & Clemens, H., 2010, in: Intermetallics. 18, S. 972-976

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Cracks in Inhomogeneous Materials: Comprehensive Assessment Using the Configurational Forces Concepts

Kolednik, O., Predan, J. & Fischer, F. D., 2010, in: Engineering Fracture Mechanics. 77, S. 2698-2711

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Cyclic loading behavior of micro-sized polycrystalline copper wires

Yang, B., Motz, C., Grosinger, W. & Dehm, G., 2010, in: Procedia Engineering. 2, S. 925-930

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Cyclic response of copper single crystal micro-beams

Kiener, D., Motz, C., Grosinger, W., Weygand, D. & Pippan, R., 2010, in: Scripta materialia. S. 500-503

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Dünne Stäbe - starke Wirkung

Kolednik, O., 2010, in: Die Presse. S. 34-38

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Effect of Equal Channel Angular Pressing on the Fracture Behavior of Commercially Pure Titanium

Pippan, R., Sabirov, I., Valiev, R. Z. & Semenova, I. P., 2010, in: Metallurgical and materials transactions. A, Physical metallurgy and materials science . S. 727-733

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Effect of microstructure on fatigue properties of WC-Co hard metals

Pippan, R., Klünsner, T., Marsoner, S., Ebner, R., Glätzle, J. & Püschel, A., 2010, in: Procedia Engineering. S. 2001-2010

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Effect of Rhenium on the Dislocation Core Structure in Tungsten

Pippan, R., Romaner, L. & Draxl, C., 2010, in: Physical review letters. S. 195503-195503

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Evolution of mechanical response and dislocation microstructures in small-scale specimens under slightly different loading conditions

Motz, C., Senger, J., Weygand, D., Gumbsch, P. & Kraft, O., 2010, in: Philosophical magazine. S. 617-628

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Experimental validation of microstructure evolution in crystalline materials

Rehrl, C., Kleber, S., Antretter, T. & Pippan, R., 2010, in: Journal of physics / Conference series. S. 1-4

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Fatigue crack propagation in threshold regime under residual stresses

Pippan, R., Predan, J. & Gubeljak, N., 2010, in: International Journal of Fatigue. S. 1050-1056

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Fracture and Delamination of Chromium Thin Films on Polymer Substrates

Cordill, M., Taylor, A., Schalko, J. & Dehm, G., 2010, in: Metallurgical and materials transactions. A, Physical metallurgy and materials science . S. 870-875

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Fracture toughness of polycrystalline tungsten alloys

Pippan, R., Gludovatz, B., Wurster, S. & Hoffmann, A., 2010, in: International journal of refractory metals & hard materials. S. 674-678

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

High temperature fracture experiments on tungsten–rhenium alloys

Pippan, R., Wurster, S. & Gludovatz, B., 2010, in: International journal of refractory metals & hard materials. S. 692-697

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Homogeneous Cu–Fe supersaturated solid solutions prepared by severe plastic deformation

Pippan, R., Quelennec, X., Menand, A., LaBretona, J. M. & Sauvage, X., 2010, in: Philosophical magazine. S. 1179-1195

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Influence of stacking fault energy and alloying on stage V hardening of HPT-deformed materials

Pippan, R. & Hafok, M., 2010, in: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. S. 1097-1104

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Influence of Yttrium on the Thermal Stability of Ti-Al-N Thin Films

Moser, M., Kiener, D., Scheu, C. & Mayrhofer, P. H., 2010, in: Materials. 3, S. 1573-1592

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

In situ TEM study of Bauschinger Effect in Freestanding Nanocrystalline Gold Films

Rajagoplan, J., Rentenberger, C., Karnthaler, H. P. & Dehm, G., 2010, in: Acta materialia. 58, S. 4772-4782

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Investigation of the fatigue behavior of Al thin films with different microstructure

Dehm, G., Heinz, W. & Pippan, R., 2010, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. S. 7757-7763

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Laying the groundwork - The search for damage resistant materials

Dehm, G., 2010, in: Public service review: European science & technology : an independent reviewPublic Service Review. 5, S. 76-77

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Local and global measures of the fracture toughness of metal matrix composites

Kolednik, O. & Sabirov, I., 2010, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. S. 3100-3110

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Magnetic characteristics of HPT deformed soft-magnetic materials

Pippan, R., Scheriau, S., Kriegisch, M., Kleber, S., Mehboob, N. & Grössinger, R., 2010, in: Journal of magnetism and magnetic materials. S. 2984-2988

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Metallic composites processed via extreme deformation: Toward the limits of strength in bulk materials

Pippan, R., Raabe, D., Choi, P. P., Li, Y., Kostka, A., Sauvage, X., Lecouturier, F., Hono, K., Kirchheim, R. & Embury, D., 2010, in: MRS Bulletin. S. 092-991

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Methodology for studying strain inhomogeneities in polycrystalline thin films during in situ thermal loading using coherent x-ray diffraction

Vaxelaire, N., Proudhon, H., Labat, S., Kirchlechner, C., Keckes, J., Jaques, V., Ravy, S., Forest, S. & Thomas, O., 2010, in: New journal of physics. S. 1-12

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Micrometer-Sized Specimen Preparation Based on Ion Slicing Technique

Pippan, R., Wurster, S., Motz, C. & Jenko, M., 2010, in: Advanced engineering materials. S. 61-63

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Micron-sized fracture experiments on amorphous SiOx films and SiOx/SiNx multi-layers

Matoy, K., Schönherr, H., Detzel, T. & Dehm, G., 2010, in: Thin solid films. 518, S. 5796-5801

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Microplasticity phenomena in thermomechanically strained nickel thin films

Taylor, A., Oh, S. H. & Dehm, G., 2010, in: Journal of materials science. 45, S. 3874-3881

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Microstructure and mechanical properties of UFG medium carbon steel processed by HPT at increased temperature

Pippan, R., Zrnik, J., Scheriau, S., Kraus, L. & Fujda, M., 2010, in: Journal of materials science. S. 4822-4826

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Microstructure evolution and strength response of ultrafine grain medium carbon steel processed by high pressure torsion

Pippan, R., Zrnik, J. & Scheriau, S., 2010, in: Journal of physics / Conference series. S. 012131-012131

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Mitigating Focused Ion Beam Damage in Molybdenum Nanopillars by In Situ Annealing

Lowry, M. B., Kiener, D., Le Blanc, B. B., Chisholm, C., Florando, J. N., Morris, J. W. J. & Minor, A. M., 2010, in: Microscopy and microanalysis. 16, S. 1748-1749

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Nanoindentation of wet and dry compact bone: Influence of environment and indenter tip geometry on the indentation modulus

Jäger, I., Guidoni, G. & Swain, M., 2010, in: Philosophical magazine. S. 553-565

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Nano-scale sliding contact deformation behaviour of enamel under wet and dry conditions

Jäger, I., Guidoni, G. & Swain, M., 2010, in: Journal of materials science / Materials in medicine. S. 1195-1203

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Neue Werkstoffe aus plastischer Hochverformung Nanokristalline Metalle

Pippan, R., Hohenwarter, A., Scheriau, S. & Bachmaier, A., 2010, in: Physik in unserer Zeit. S. 23-29

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Numerical analysis on special cracking phenomena of residual compressive inter-layers in ceramic laminates

Chen, C., Bermejo Moratinos, R. & Kolednik, O., 2010, in: Engineering Fracture Mechanics. 77, S. 2567-2576

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Overview of the Grain Size Effects on the Mechanical and Deformation Behaviour of Electrodeposited Nanocrystalline Nickel - from Nanoindentation to High Pressure Torsion

Pippan, R., Yang, B. & Vehoff, H., 2010, in: Materials Science Forum . S. 85-98

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Perylene-Labeled Silica Nanoparticles: Synthesis and Characterization of Three Novel Silica Nanoparticle Species for Live-Cell Imaging

Blechinger, J., Herrmann, R., Kiener, D., Garcia-Garcia, F. J., Scheu, C., Reller, A. & Bräuchle, C., 2010, in: Small. 6, S. 2427-2435

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Quantitative In Situ Mechanical Testing in Electron Microscopes

Motz, C., Legros, M. & Gianola, D. S., 2010, in: Procedia Engineering. S. 925-930

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Rate Independent and Rate Dependent Structural Evolution during Severe Plastic Deformation

Pippan, R., Bachmaier, A. & Hafok, M., 2010, in: Metallurgical and materials transactions. A, Physical metallurgy and materials science . S. 8-13

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Recrystallization and grain growth behavior of SPD deformed 316L stainless steel

Pippan, R., Scheriau, S., Schöberl, T. & Kleber, S., 2010, in: Advanced materials. S. 491-496

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Residual stresses and thermal fatigue in CrN hard coatings characterized by high-temperature synchrotron X-ray diffraction

Kirchlechner, C., Martinschitz, K. J., Daniel, R., Klaus, M., Genzel, C., Mitterer, C. & Keckes, J., 2010, in: Thin solid films. 518, 8, S. 2090-2096

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Review: current international research into cellulose nanofibres and nanocomposites

Keckes, J., Eichhorn, S. J., Dufresne, A., Aranguren, M., Marcovich, N. E., Capadona, J. R., Rowan, S. J., Weder, C., Thielemans, W., Roman, M., Renneckar, S., Gindl, W., Veigel, S., Yano, H., Abe, K., Nogi, M. & Nakagaito, A. N., 2010, in: Journal of materials science. S. 1-33

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Saturation of Fragmentation During Severe Plastic Deformation

Pippan, R., Scheriau, S., Taylor, A., Hafok, M., Hohenwarter, A. & Bachmaier, A., 2010, in: Annual review of materials research. 40, S. 319-343

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Stress, Sheet Resistance, and Microstructure Evolution of Electroplated Cu Films During Self-Annealing

Huang, R., Robl, W., Ceric, H., Detzel, T. & Dehm, G., 2010, in: IEEE transactions on device and materials reliability. 10, 1, S. 47-54

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Structural characterization of a Cu/MgO(001) interface using C S-corrected HRTEM

Cazottes, S., Zhang, Z. L., Daniel, R., Chawla, J. S., Gall, D. & Dehm, G., 2010, in: Thin solid films.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Structural characterization of a Cu/MgO(001) interface using CS-corrected HRTEM

Cazottes, S., Zhang, Z., Daniel, R., Chawla, J. S., Gall, D. & Dehm, G., 2010, in: Thin solid films. 519, S. 1662-1667

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Study of nanometer-scaled lamellar microstructure in a Ti-45Al-7.5Nb alloy-Experiments and modeling

Fischer, F. D., Waitz, T., Scheu, C., Cha, L., Dehm, G., Antretter, T. & Clemens, H., 2010, in: Intermetallics. 18, S. 509-517

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

The ductile to brittle transition of ultrafine-grained Armco iron: an experimental study

Hohenwarter, A., Kammerhofer, C. & Pippan, R., 2010, in: Journal of materials science. 54, S. 4805-4812

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

The origin of stresses in magnetron-sputtered thin films with zone T structures

Daniel, R., Martinschitz, K., Keckes, J. & Mitterer, C., 2010, in: Acta materialia. 58, S. 2621-2633

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

The relationship between structure and mechanical properties of hydrogenated amorphous carbon films

Schöberl, T., Kahn, M., Paskvale, S., Cekada, M., Waldhauser, W., Mitterer, C., Pelinconb, P. & Brandstätter, E., 2010, in: Diamond and related materials. S. 1245-1248

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Thermal behavior of Ni (99.967% and 99.5% purity) deformed to an ultra-high strain by high pressure torsion

Pippan, R., Zhang, H. W., Huang, X. & Hansen, N., 2010, in: Acta materialia. S. 1698-1707

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Thermally-induced formation of hexagonal AlN in AlCrN hard coatings on sapphire: Orientation relationships and residual stresses

Bartosik, M., Daniel, R., Mitterer, C. & Keckes, J., 2010, in: Surface & coatings technology. 205, S. 1320-1323

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

X-ray diffraction analysis of three-dimensional residual stress fields reveals origins of thermal fatigue in uncoated and coated steel

Kirchlechner, C., Martinschitz, K. J., Daniel, R., Mitterer, C., Donges, J., Rothkirch, A., Klaus, M., Genzel, C. & Keckes, J., 2010, in: Scripta materialia. 62, S. 774-777

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

A case study on the effect of thermal residual stresses on the crack-driving force in linear-elastic bimaterials

Rakin, M., Kolednik, O., Medjo, B., Simha, N. K. & Fischer, F. D., 2009, in: International Journal of Mechanical Sciences. S. 531-540

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

A comparative micro-cantilever study of the mechanical behavior of silicon based passivation films

Matoy, K., Schönherr, H., Detzel, T., Schöberl, T., Pippan, R., Motz, C. & Dehm, G., 2009, in: Thin solid films. 518, S. 247-256

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Actual versus apparent within cell wall variability of nanoindentation results from wood cell walls related to cellulose microfibril angle

Konnerth, J., Gierlinger, N., Keckes, J. & Gindl, W., 2009, in: Journal of materials science. 44, S. 4399-4406

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

A novel route for the synthesis of nanocomposite tungsten carbide–cobalt using a biopolymer as a carbon source

Holgate, M. W. R., Schöberl, T. & Hall, S. R., 2009, in: Journal of sol-gel science and technology. 49, S. 145-149

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Can micro-compression testing provide stress-strain data for thin films? A comparative study using Cu, VN, TiN and W coatings

Dehm, G., Wörgötter, H.-P., Cazottes, S., Purswani, J. M., Gall, D., Mitterer, C. & Kiener, D., 2009, in: Thin solid films. 518, S. 1517-1521

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Cellulose in never-dried gel oriented by an AC electric field

Gindl, W., Emsenhuber, G., Maier, G. & Keckes, J., 2009, in: Biomacromolecules. 10, S. 1315-1318

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Characterization of Mo/Si soft X-ray multilayer mirrors by grazing-incidence small-angle X-ray scattering

Siffalovic, P., Majkova, E., Chitu, L., Jergel, M., Luby, S., Keckes, J., Maier, G. A., Timmann, A., Roth, S. V., Tsuru, T., Harada, T., Yamamoto, M. & Heinzmann, U., 2009, in: Vacuum. 89, S. 19-25

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)