Department Materials Science

Organisational unit: Departments and Institutes

101 - 200 out of 5,456Page size: 100

Research output

  1. 2024
  2. Published

    Probing local adhesion: A miniaturized multi-photon lithography design demonstrated on silanized vs. untreated surfaces

    Jelinek, A., Rossegger, E., Schlögl, S., Kiener, D. & Alfreider, M., Jun 2024, In: Materials and Design. 242.2024, June, 13 p., 112994.

    Research output: Contribution to journal › Article › Research › peer-review

  3. E-pub ahead of print

    Nanocomposite versus solid solution formation in the TiSiN system

    Schalk, N., Moritz, Y., Nayak, G. K., Holec, D., Hugenschmidt, C., Burwitz, V. V., Mathes, L., Schiester, M., Saringer, C., Czettl, C., Pohler, M., Mitterer, C. & Tkadletz, M., 30 May 2024, (E-pub ahead of print) In: Acta materialia. 275.2024, 15 August, 10 p., 120063.

    Research output: Contribution to journal › Article › Research › peer-review

  4. E-pub ahead of print

    Artificial thermal shock cracks in WRe – A proof of concept study

    Sommerauer, M., Siller, M., Pippan, R., Bostrom, N. & Maier-Kiener, V., 29 May 2024, (E-pub ahead of print) In: Nuclear Materials and Energy. 39.2024, June, 8 p., 101685.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Scalable synthesis of biomass-derived three-dimensional hierarchical porous activated carbons for electrochemical energy storage and hydrogen physisorption

    Selvaraj, A. R., Kostoglou, N., Rajendiran, R., Cho, I., Rebholz, C., Chakravarthi, N. D. & Prabakar, K., 28 May 2024, In: Journal of energy storage. 92.2024, 1 July, 10 p., 112085.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Interplay between alloying and tramp element effects on temper embrittlement in bcc iron: DFT and thermodynamic insights

    Reiners-Sakic, A., Schnitzer, R. & Holec, D., 27 May 2024, In: Acta materialia. 275.2024, 15 August, 12 p., 120044.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Predictive Model for Catalytic Methane Pyrolysis

    Pototschnig, U., Matas, M., Scheiblehner, D., Neuschitzer, D., Obenaus-Emler, R., Antrekowitsch, H. & Holec, D., 25 May 2024, In: Journal of physical chemistry C (C, Nanomaterials and interfaces). 128.2024, 22, p. 9034-9040 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Small-angle neutron scattering reveals high-density adsorbed hydrogen in carbon micropores at low pressures and supercritical temperature

    Stock, S., Seyffertitz, M., Kostoglou, N., Rauscher, M., Demé, B., Mitterer, C. & Paris, O., 20 May 2024.

    Research output: Contribution to conference › Poster › Research

  9. Published

    Multimethod cross-sectional characterization approaching the limits of diamond monophase multilayers

    Meindlhumer, M., Grau, J., Sternschulte, H., Halahovets, Y., Siffalovic, P., Burghammer, M., Steinmüller-Nethl, D. & Keckes, J., 13 May 2024, In: Materials characterization. 212.2024, June, 15 p., 113973.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Influence of deformation, microstructure, and temperature on the fracture resistance of technically pure tungsten

    Gludovatz, B., Wurster, S., Hohenwarter, A., Hoffmann, A. & Pippan, R., 11 May 2024, In: Materials Science and Engineering: A. 902.2024, June, 11 p., 146631.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Corrigendum to “From abandoned mines to carbon sinks: Assessing the CO2 storage capacity of Austrian low-rank coal deposits” [International Journal of Coal Geology 286 (2024) 1–13/104495]

    Safaei Farouji , M., Misch, D., Sachsenhofer, R. F., Rauscher, M. & Kostoglou, N., 6 May 2024, In: International journal of coal geology. 287.2024, 29 May, 1 p., 104520.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Toughness enhancement in TiN/Zr0.37Al0.63N1.09 multilayer films

    Lorentzon, M., Meindlhumer, M., Palisaitis, J., Greczynski, G., Keckes, J., Rosen, J., Hultman, L., Birch, J. & Ghafoor, N., 6 May 2024, In: Acta Materialia. 273.2024, 1 July, 14 p., 119979.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Turning of high entropy alloy into high entropy carbides by modifying carbon content during reactive sintering

    Valášek, D., Pouchlý, V. & Salamon, D., 1 May 2024, In: Ceramics International. 50, 9, p. 15367-15372 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Design and characterization of novel Zr-Al-Fe-Y metallic glasses with nanoscale phase separation

    Singh, D., Parthiban, R., Jelinek, A., Bhattacharya, R., Chen, Z., Fellner, S., Gammer, C., Zhang, Z. & Eckert, J., May 2024, In: Materialia. 34.2024, May, 7 p., 102104.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Prediction of thermal shock induced cracking in multi-material ceramics using a stress-energy criterion

    Papšík, R., Sevecek, O., Schlacher, J. & Bermejo Moratinos, R., May 2024, In: Engineering Fracture Mechanics. 303, 110121.

    Research output: Contribution to journal › Article › Research › peer-review

  16. E-pub ahead of print

    Peculiarity of hydrogen absorption in duplex steels: Phase-selective lattice swelling and stress evolution

    Pogrielz, T., Eichinger, M., Weiser, A., Todt, J., Hohenwarter, A., Ascii, A., Sarac, B., Brandl, D., Ressel, G., Jary, M., Dlouhý, A., Mori, G. K. & Keckes, J., 27 Apr 2024, (E-pub ahead of print) In: Scripta Materialia. 248.2024, 15 July, 7 p., 116142.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Selective Cu electroplating enabled by surface patterning and enhanced conductivity of carbon fiber reinforced polymers upon air plasma etching

    Rafailović, L. D., Trišović, T., Stupavská, M., Souček, P., Velicsanyi, P., Nixon, S., Elbataioui, A., Zak, S., Cordill, M. J., Hohenwarter, A., Kleber, C. & Ráheľ, J., 20 Apr 2024, In: Journal of alloys and compounds. 992.2024, 15 July, 11 p., 174569.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Effect of Nb incorporation in Mo2BC coatings on structural and mechanical properties—Ab initio modelling and experiment

    Zenisek, J., Soucek, P., Ondračka, P., Czigány, Z., Buršíková, V., Holec, D., Balazsi, K. & Vasina, P., 15 Apr 2024, In: Acta materialia. 268.2024, 15 April, 12 p., 119741.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Microscopic fracture toughness of notched porous sintered Cu micro-cantilevers for power electronics packaging

    Hu, D., Du, L., Alfreider, M., Fan, J., Kiener, D. & Zhang, G., 7 Apr 2024, In: Materials Science and Engineering: A. 897.2024, April, 10 p., 146316.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Structure–Property Relations in Pb-Supersaturated Metastable Sn-Rich Pb-Sn Alloys

    Friák, M., Cipek, P., Pavlu, J., Zobac, O., Roupcova, P., Miháliková, I., Holec, D., Msallamova, S. & Michalcova, A., 4 Apr 2024, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 55.2024, June, p. 1867-1877 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Towards 3D-printed alumina-based multi-material components with enhanced thermal shock resistance

    Schlacher, J. C., Geier, S., Schwentenwein, M. & Bermejo, R., Apr 2024, In: Journal of the European Ceramic Society. 44.2024, 4, p. 2294-2303 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    The Roles of Impurities and Surface Area on Thermal Stability and Oxidation Resistance of BN Nanoplatelets

    Kostoglou, N., Stock, S., Solomi, A., Holzapfel, D. M., Hinder, S. J., Baker, M., Constantinides, G., Ryzhkov, V., Maletaskic, J., Matovic, B., Schneider, J. M., Rebholz, C. & Mitterer, C., 28 Mar 2024, In: Nanomaterials. 14.2024, 7, 16 p., 601.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Elucidating effects of Eu and P on solidification and precipitation of Al-7Si-0.3Mg based alloys refined by Ta and TiB2

    Spáčil, I., Gehringer, D., Holec, D., Albu, M. & LI, J., 25 Mar 2024, In: Journal of alloys and compounds. 978.2024, 25 March, 16 p., 173343.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Hardness and fracture toughness enhancement in transition metal diboride multilayer films with structural variations

    Vidis, M., Fiantok, T., Gocnik, M., Svec, P. J., Nagy, S., Truchly, M., Izai, V., Roch, T., Satrapinskyy, L., Sroba, V., Meindlhumer, M., Grancic, B., Kus, P., Keckes, J. & Mikula, M., 21 Mar 2024, In: Materialia. 34.2024, May, 11 p., 102070.

    Research output: Contribution to journal › Article › Research › peer-review

  25. E-pub ahead of print

    From abandoned mines to carbon sinks: Assessing the CO2 storage capacity of Austrian low-rank coal deposits

    Safaei Farouji, M., Misch, D., Sachsenhofer, R. F., Rauscher, M. & Kostoglou, N., 20 Mar 2024, (E-pub ahead of print) In: International journal of coal geology. 286.2024, 6 May, 15 p., 104495.

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    PBF-LB of Soft Magnetic Fe-Based Metallic Glasses.

    Römer, F., Ramasamy, P., Spieckermann, F. & Eckert, J., 18 Mar 2024. 1 p.

    Research output: Contribution to conference › Poster › Research

  27. Published

    Optimizing Size and Number Density of Al3Zr Dispersoids in Al–Zn–Mg–Cu Alloys

    Honaramooz, M. T., Morak, R. & Paris, O., 16 Mar 2024, In: Advanced Engineering Materials. 26.2024, 19, 7 p., 2400353.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    How Cracks Induced by Straining Influence the Tribological Properties of Mo Films Deposited on Polyimide Substrates

    Kobierska, E., Cordill, M. J., Franz, R. & Rebelo de Figueiredo, M., 1 Mar 2024, In: Metals : open access journal . 14.2024, 3, 11 p., 295.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Effect of intercritical annealing on the microstructure and mechanical properties of a PH 13-8 Mo maraging steel

    Rosenauer, A., Teusl, S., Landefeld, A., Brandl, D., Ressel, G., Hönigmann, T., Stadler, M., Turk, C., Maawad, E., Stockinger, M. & Schnitzer, R., Mar 2024, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 895.2024, March, 13 p., 146220.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Hydrogen densification in carbon nanopore confinement: Insights from small-angle neutron scattering using a hierarchical contrast model

    Stock, S., Seyffertitz, M., Kostoglou, N., Rauscher, M., Presser, V., Demé, B., Cristiglio, ‪., Kratzer, M., Rols, S., Mitterer, C. & Paris, O., Mar 2024, In: Carbon. 221.2024, March, 13 p., 118911.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Removal of Crystal Violet Dye from Aqueous Solutions through Adsorption onto Activated Carbon Fabrics

    Mulla, B., Ioannou, K., Kotanidis, G., Ioannidis, I., Constantinides, G., Baker, M., Hinder, S. J., Mitterer, C., Pashalidis, I., Kostoglou, N. & Rebholz, C., Mar 2024, In: C – journal of carbon research. 10.2024, 1, 18 p., 19.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    The ball-on-three-balls strength test: In-situ testing through X-ray radiography and tomography

    Staudacher, M., Pinzón, G., Adrien, J., Lachambre, J., Maire, E., Chevalier, J. & Lube, T., Mar 2024, In: Open ceramics. 17, 100514.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Neural Network Supported Microscale In Situ Deformation Tracking: A Comparative Study of Testing Geometries

    Keckes, J. F., Jelinek, A., Kiener, D. & Alfreider, M., 23 Feb 2024, In: JOM. 76.2024, May, p. 2336-2351 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Evaluating High-Pressure Torsion Scale-Up

    Reis, L. M., Hohenwarter, A., Kawasaki, M. & Figueiredo, R. B., 22 Feb 2024, In: Advanced Engineering Materials. 26.2024, 19, 11 p., 2400175.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    A rapid heat treatment for nanocrystallization of amorphous Fe75.1Cu1Nb1.5Si15.5B6.9 and Fe83Cu1Nb4B12 tape wound cores

    Plutta, N., Spieckermann, F., Polak, C., Marsilius, M., Zehetbauer, M. J. & Eckert, J., 15 Feb 2024, In: Journal of magnetism and magnetic materials. 592.2024, 15 February, 6 p., 171797.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Influence of multiple detection events on compositional accuracy of TiN coatings in atom probe tomography

    Schiester, M., Waldl, H., Hans, M., Thuvander, M., Primetzhofer, D., Schalk, N. & Tkadletz, M., 15 Feb 2024, In: Surface & coatings technology. 477.2024, 15 February, 11 p., 130318.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Hydrogen trapping in mixed carbonitrides

    Hammer, P., Romaner, L. & Razumovskiy, V. I., 10 Feb 2024, In: Acta materialia. 268.2024, 15 April, 18 p., 119754.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Additive manufacturing of 3D yttria-stabilized zirconia microarchitectures

    Winczewski, J. P., Zeiler, S., Gabel, S., Maestre, D., Merle, B., Gardeniers, J. G. E. & Susarrey-Arce, A., 1 Feb 2024, In: Materials and Design. 238.2024, February, 11 p., 112701.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    A carbon-stabilized austenitic steel with lower hydrogen embrittlement susceptibility

    Khanchandani, H., Zeiler, S., Strobel, L., Göken, M. & Felfer, P., Feb 2024, In: Steel research international. 95.2024, 2, 5 p., 2300372.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Fracture toughness of Ca-, Sr-, and Ba-aluminoborosilicate glasses

    Fry, A. L., Krug, C., Ladinger, L., Lube, T., Kim, S. H. & Mauro, J. C., Feb 2024, In: Journal of the American Ceramic Society. 107, 2, p. 830-843 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Multiscale in-situ observations of the micro- and nanostructure of a PH 13-8 Mo maraging steel during austenitization

    Rosenauer, A., Brandl, D., Ressel, G., Hönigmann, T., Stadler, M., Turk, C., Gammer, C., Wiessner, M., Gamsjäger, E., Stockinger, M. & Schnitzer, R., Feb 2024, In: Materials characterization. 208.2024, February, 13 p., 113554.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    In situ and ex situ quantification of nanoparticle fluxes in magnetron sputter inert gas condensation: A Cu nanoparticle case study

    Knabl, F., Bandl, C., Griesser, T. & Mitterer, C., 17 Jan 2024, In: Journal of vacuum science & technology / A (JVST). 42.2024, 2, 10 p., 023201.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Micromechanical Properties of Micro- and Nanocrystalline CVD Diamond Thin Films with Gradient Microstructures and Stresses

    Meindlhumer, M., Ziegelwanger, T., Grau, J., Sternschulte, H., Sztucki, M., Steinmüller-Nethl, D. & Keckes, J., 12 Jan 2024, In: Journal of Vacuum Science and Technology A: Vacuum, Surfaces and Films. 42.2024, 2, 12 p., 023401.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Short-Time Magnetron Sputtering for the Development of Carbon–Palladium Nanocomposites

    Knabl, F., Kostoglou, N., Terziyska, V., Hinder, S. J., Baker, M., Bousser, E., Rebholz, C. & Mitterer, C., 12 Jan 2024, In: Nanomaterials. 14.2024, 2, 10 p., 164.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    A Comparison of 90° Bending for Foldable Electronics

    Cordill, M. J., Kreiml, P., Köstenbauer, H. & Mitterer, C., 11 Jan 2024, In: Coatings. 14.2024, 1, 18 p., 98.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Micro-Mechanical Fracture Investigations on Grain Size Tailored Tungsten-Copper Nanocomposites

    Schmuck, K. S., Burtscher, M., Alfreider, M., Wurmshuber, M. & Kiener, D., 9 Jan 2024, In: JOM. 76.2024, 5, p. 2302-2314 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    The Effect of the Nanostructured Surface Modification on the Morphology and Biocompatibility of Ultrafine-Grained Titanium Alloy for Medical Application

    Mihajlović, D., Rakin, M., Hohenwarter, A., Veljović, D., Kojić, V. & Djokić, V., 1 Jan 2024, Mechanical Engineering in Biomedical Applications Bio-3D Printing, Biofluid Mechanics, Implant Design, Biomaterials, Computational Biomechanics, Tissue Mechanics. Wiley-Blackwell, USA, p. 121-150 30 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  48. Published

    The contribution of ceramography to the development of ceramic spark plug electrode materials for large gas engines

    Gruber, M., Melcher, V., Harrer, W. S., Tilz, A., Engelmayer, M., Fimml, W., Wimmer, A. & Bermejo, R., Jan 2024, In: Practical Metallography. 61.2024, 1, p. 4-15 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    3D-printed alumina-based ceramics with spatially resolved porosity

    Nohut, S., Schlacher, J., Kraleva, I., Schwentenwein, M. & Bermejo, R., 2024, In: International journal of applied ceramic technology. 21.2024, 1, p. 89-104 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Advanced characterization of nanoporous materials

    Kostoglou, N., 2024.

    Research output: Contribution to conference › Poster › Research

  51. Published

    Advancements in elemental analysis of Ti(C,N) coatings using atom probe tomography

    Schiester, M., 2024

    Research output: Thesis › Master's Thesis

  52. Published

    A laboratory total scattering approach for studying short-range order in a novel precipitation-strengthened compositionally complex alloy

    Bauer, N. E., 2024

    Research output: Thesis › Master's Thesis

  53. Published

    A model for catalytic methane pyrolysis - A DFT study

    Matas, M., Pototschnig, U. & Holec, D., 2024.

    Research output: Contribution to conference › Poster › Research › peer-review

  54. Published

    Annealing activated substrate element diffusion and its influence on the microstructure and mechanical properties of CVD TiN/TiCN coatings

    Konstantiniuk, F., Schiester, M., Tkadletz, M., Czettl, C. & Schalk, N., 2024, In: Surface & coatings technology. 488.2024, 30 July, 6 p., 131079.

    Research output: Contribution to journal › Article › Research › peer-review

  55. Published

    A strength testing method for additively manufactured ceramics

    Lube, T., Staudacher, M., Scheithauer, U. & Schwentenwein, M., 2024.

    Research output: Contribution to conference › Poster › Transfer › peer-review

  56. Published

    Atomistic investigations of SiC polytypes and creation of machine learning interatomic potential

    Reichmann, A., Rajabzadeh, Z., Halkali, C., Hammer, R. & Romaner, L., 2024.

    Research output: Contribution to conference › Poster › Research › peer-review

  57. Published

    Automatic etch pit detection and characterization in KOH etch images of 4H-SiC using deep learning

    Holub, G., Hofer, S., Obermüller, T. & Romaner, L., 2024.

    Research output: Contribution to conference › Poster › Research › peer-review

  58. Published

    Bestimmung mechanischer Eigenschaften einer Low Temperature Cofired Keramik

    Waidbacher, V., 2024

    Research output: Thesis › Master's Thesis

  59. Published

    BiMg2/3Nb1/3O3-based thin films from Chemical Solution Deposition: A study on the influence of the process parameters on the structure and the electrical properties

    Gindel, T., 2024

    Research output: Thesis › Master's Thesis

  60. Published

    Boron nitride nanotubes versus carbon nanotubes: A thermal stability and oxidation behavior study

    Kostoglou, N., Tampaxis, C., Charalambopoulou, G., Constantinides, G., Ryzhkov, V., Doumanidis, C. C., Matovic, B., Mitterer, C. & Rebholz, C., 2024.

    Research output: Contribution to conference › Poster › Research

  61. Published

    Ceramic materials as an alternative for conventional spark plug electrodes

    Harrer, W. S., Gruber, M., Melcher, V., Tilz, A., Engelmayer, M., Wimmer, A. & Bermejo, R., 2024, In: International journal of applied ceramic technology. 2024, ??? Stand: 30. September 2024, p. 4393-4403

    Research output: Contribution to journal › Article › Research › peer-review

  62. Published

    Characterization of phase transformations and precipitation behavior in a novel Cu-enhanced near-α Ti alloy for additive manufacturing

    Obersteiner, D., Klein, T., Primig, S. & Musi, M., 2024.

    Research output: Contribution to conference › Poster › Research › peer-review

  63. Published

    Charakterisierung der Mikro- und Nanostruktur eines hochlegierten, martensitischen Cr-Stahls

    Pferschy, M., 2024

    Research output: Thesis › Master's Thesis

  64. Published

    CharAM - Mechanische Charakterisierung additiv gefertigter keramischer Bauteile

    Scheithauer, U. & Staudacher, M., 2024, 4 p. Dresden

    Research output: Other contribution › Transfer

  65. Published

    CO2 storage potential of low and medium-rank coals from Austria and Kazakhstan

    Safaei-Farouji , M., Misch, D., Sachsenhofer, R. F., Kostoglou, N., Junussov, M. & Fustic, M., 2024.

    Research output: Contribution to conference › Poster › Research

  66. Published

    Comparison of omega particle size and interface in Ti-15Mo: APT vs. XRD

    Kozlik, J., Holý, V., Smilauerova, J. & Jelinek, A., 2024.

    Research output: Contribution to conference › Poster › Research › peer-review

  67. Published

    Designability and Versatility of Thermoplastic Forming for Bulk Metallic Glasses

    Cai, F.-F., 2024

    Research output: Thesis › Doctoral Thesis

  68. Published

    Development and Automation of a Bulge Test Procedure for Polymer Supported Thin Films

    Kuhn, A., 2024

    Research output: Thesis › Master's Thesis

  69. Published

    Development of a machine learning-based interatomic potential for silicon carbide (SiC) using atomic cluster expansion (ACE)

    Halkali, C., Holub, G., Rajabzadeh, Z. & Romaner, L., 2024.

    Research output: Contribution to conference › Poster › Research › peer-review

  70. Published

    Development of high entropy alloy thin films for hydrogen permeation barriers

    Kirchmair, M., 2024

    Research output: Thesis › Master's Thesis

  71. Published

    Direct fabrication of tailored metal-carbon nanocomposites made by two-photon polymerization

    Jahn, M. P., 2024

    Research output: Thesis › Master's Thesis

  72. Published

    Effect of airborne particle abrasion and regeneration firing on the strength of 3D-printed 3Y and 5Y zirconia ceramics

    Mirt, T., Kocjan, A., Hofer, A.-K., Schwentenwein, M., Ivekovic, A., Bermejo, R. & Jevnikar, P., 2024, In: Dental Materials. 40.2024, 1, p. 111-117 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  73. Published

    Effect of Cu on the Carbide and Nitride Formation in Steels for High-Power Density Gears

    Böhle, S. I., 2024

    Research output: Thesis › Doctoral Thesis

  74. Published

    Effects of processing conditions on electrical properties of cold sintered BaTiO3

    Kaplan, P., 2024

    Research output: Thesis › Master's Thesis

  75. Published

    Einfluss von Ausforming auf die Mikrostruktur von PH13-8 Mo Maraging Stählen

    Krammer, K., 2024

    Research output: Thesis › Master's Thesis

  76. Published

    Electrical cycling and failure analysis of a lead-free piezoceramic

    Neumüller, J., 2024

    Research output: Thesis › Master's Thesis

  77. Published

    Engineering nickel-aluminum reactive powders: Influence of ball milling duration and starting particle size on specific surface area and skeletal density

    Kyriacou, A., Kostoglou, N., Gunduz, I. E. & Rebholz, C., 2024.

    Research output: Contribution to conference › Poster › Research

  78. Published

    Fabrication and Mechanical Characterisation of Advanced Alumino-Borosilicate Glasses

    Ladinger, L., 2024

    Research output: Thesis › Master's Thesis

  79. Published

    Front Cover Story for peer-reviewed publication titled "Plasma-Treated Cobalt-Doped Nanoporous Graphene for Electrochemical Applications": C—Journal of Carbon Research, Volume 10, Issue 2, June 2024

    Knabl, F., Kostoglou, N., Gupta, R. K., Tarat, A., Hinder, S. J., Baker, M., Rebholz, C. & Mitterer, C., 2024

    Research output: Non-textual form › Digital or Visual Products › Research

  80. Published

    Functional magnetic composite materials with tuneable magnetic properties

    Payer, P., 2024

    Research output: Thesis › Master's Thesis

  81. Published

    Functional thin films for advanced microelectronics at the chair for functional materials and material systems

    Daniel, R., 2024.

    Research output: Contribution to conference › Poster › Research › peer-review

  82. Published

    Hochauflösende Untersuchung der Nb-Löslichkeit in mikrolegierten Stählen

    Luger, T., 2024

    Research output: Thesis › Master's Thesis

  83. Published

    Hydrogen embrittlement in steels: state-of-the-art in theory and practice

    Graf, M., 2024

    Research output: Thesis › Master's Thesis

  84. Published

    Hydrogen storage in nanoporous FeTi foams

    Schweiger, L., Spieckermann, F., Kostoglou, N., Stock, S., Wurster, S., Cengeri, P., Zehetbauer, M. J., Kiener, D. & Eckert, J., 2024.

    Research output: Contribution to conference › Poster › Research

  85. Published

    Impact of measurement errors on machine learning models in steel production

    Rechberger, A., 2024

    Research output: Thesis › Master's Thesis

  86. Published

    Impact of the Wire Arc Additive Manufacturing (WAAM) process on the distortion and residual stress state of rapidly rotating components in solid/liquid separation

    Ruess, L., 2024

    Research output: Thesis › Master's Thesis

  87. Published

    Influence of Sc, Y, Ti, Zr, Hf, V, Nb, and Ta on structural and mechanical properties of Cr-Al-N coatings

    Mayrhofer, P., Zhou, L. & Holec, D., 2024, In: Berg- und hüttenmännische Monatshefte : BHM. 169.2024, 7, p. 375-380 6 p.

    Research output: Contribution to journal › Article › Research

  88. Published

    Integrated approach to SiC crystal growth: Multiphysics modeling and chemistry assessment in PVT furnaces

    Ramadan, Z., Obermüller, T., Hammer, R. & Romaner, L., 2024.

    Research output: Contribution to conference › Poster › Research › peer-review

  89. Published

    Interface engineering at the nanoscale: Synthesis of low-energy boundaries

    Kapp, M., Eckert, J. & Renk, O., 2024, In: Advanced engineering materials. 26.2024, 19, 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  90. Published

    Investigating mechanical properties of silicon carbide coated carbon nanotube composite at elevated temperatures

    Mo, J., Schaffar, G. J. K., Du, L., Maier-Kiener, V., Kiener, D., Vollebregt, S. & Zhang, G., 2024, 2024 IEEE 37th International Conference on Micro Electro Mechanical Systems (MEMS). Vol. 37.2024. p. 626-629 4 p. (IEEE access).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  91. Published

    Investigation of the lifetime of sintered interconnects in power electronics

    Prutti, M. T., 2024

    Research output: Thesis › Master's Thesis

  92. Published

    LITHOZ: Multi-Material 3D Printing

    Schwentenwein, M., Schlacher, J. & Bermejo Moratinos, R., 2024, In: Ceramic applications. 12, 1, p. 40-43

    Research output: Contribution to journal › Article › Transfer

  93. Published

    Lokales Verformungsverhalten von gehipptem Molybdän

    Heim, C., 2024

    Research output: Thesis › Master's Thesis

  94. Published

    Mechanical and electronic properties of monolayer TMDCs: A DFT study

    Ziegler, M., 2024

    Research output: Thesis › Master's Thesis

  95. Published

    Metallic Thin Film Fatigue Dominated by the Interface Character

    Gebhart, D., 2024

    Research output: Thesis › Doctoral Thesis

  96. Published

    Micro-mechanical approach to assess the strength of nanocrystalline tungsten-copper composites

    Schmuck, K. S., 2024

    Research output: Thesis › Doctoral Thesis

  97. Published

    Microplastic response of 2PP-printed ceramics

    Sänger, J. C., Riechers, B., Pauw, B. R., Maaß, R. & Günster, J., 2024, In: Journal of the American Ceramic Society. 107, p. 6636-6645

    Research output: Contribution to journal › Article › Research › peer-review

  98. Published

    Microstructural influences on bending resonance fatigue in nickel-based superalloy Rene'88DT

    Taurer, G., 2024

    Research output: Thesis › Master's Thesis

  99. Published

    Microstructure and magnetic properties of high-pressure torsion synthesized hard magnetic materials

    Weissitsch, L. E., 2024

    Research output: Thesis › Doctoral Thesis

  100. Published

    Microstructures and mechanical properties of CoCrFeNiAl-based high-entropy alloys

    Zhang, Z., 2024

    Research output: Thesis › Doctoral Thesis

  101. Published

    Mikromechanische Charakterisierung von Phasenübergängen

    Gottlieb, H., 2024

    Research output: Thesis › Master's Thesis

Previous 1 2 3 4 5 6 7 8 ...55 Next
View graph of relations

Contact information

Roseggerstraße 12 / Max-Tendler-Straße 9/1.UG, 8700 Leoben