Chair of Materials Physics (430)

Organisational unit: Chair

1401 - 1500 out of 1,986Page size: 100

Research output

  1. 2011
  2. Published

    Ursachen und Auswirkungen von Delaminationsrissen in thermomechanisch gewalzten Stählen

    Sonnleitner, M. P., 2011, 260 p.

    Research output: Thesis › Doctoral Thesis

  3. Published

    Verformung und Bruch von modernen, hochfesten Multiphasenstählen

    Kapp, M., 2011, 193 p.

    Research output: Thesis › Doctoral Thesis

  4. Published

    Work hardening in micropillar compression: In situ experiments and modeling

    Kiener, D., Guruprasad, P. J., Keralavarma, S. M., Dehm, G. & Benzerga, A. A., 2011, In: Acta materialia. 59, p. 3825-3840

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Zyklische Plastizität an Mikrobiegeproben

    Liegl, W., 2011

    Research output: Thesis › Diploma Thesis

  6. Published

    µLaue: Compression studies on miniaturised Copper single crystals

    Kirchlechner, C., Kapp, M., Motz, C., Grosinger, W., Keckes, J., Micha, J.-S., Ulrich, O. & Dehm, G., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  7. 2010
  8. Published

    Verfahren zur Herstellung eines mehrlagigen metallischen Verbundblechs und Verbundblech

    Schmidt, C. (Inventor), Knieke, C. (Inventor), Peukert, W. (Inventor), Maier, V. (Inventor), Höppel, H. W. (Inventor) & Göken, M. (Inventor), 29 Jun 2010

    Research output: Patent

  9. Published

    Verfahren zur Herstellung eines mehrlagigen metallischen Verbundblechs unter Verwendung einer Partikel-Suspension; entsprechendes Verbundblech

    Schmidt, C. (Inventor), Knieke, C. (Inventor), Peukert, W. (Inventor), Maier, V. (Inventor), Höppel, H. W. (Inventor) & Göken, M. (Inventor), 10 May 2010

    Research output: Patent

  10. Published

    3D strain imaging in sub-micrometer crystals using cross-reciprocal space measurements: Numerical feasibility and experimental methodology

    Vaxelaire, N., Labat, S., Chamard, V., Thomas, O., Jaques, V., Picca, F., Ravy, S., Kirchlechner, C. & Keckes, J., 2010, In: Nuclear instruments & methods in physics research / B Beam interactions with materials and atoms. p. 388-393

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Absolute concentration of free volume-type defects in ultrafine-grained Fe prepared by high-pressure torsion

    Pippan, R., Oberdorfer, B., Lorenzoni, B., Unger, K., Sprengel, W., Zehetbauer, M. & Würschum, R., 2010, In: Scripta materialia. p. 452-455

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Achieving the ideal strength in annealed Molybdenum nanopillars

    Lowry, M. B., Kiener, D., Le Blanc, B. B., Chisholm, C., Florando, J. N., Morris, J. W. J. & Minor, A. M., 2010, In: Acta materialia. 58, p. 5160-5167

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Adhesion Energies of Cr Thin Films on Polyimide Determined from Buckling: Experiment and Model

    Cordill, M., Fischer, F. D., Rammerstorfer, F. G. & Dehm, G., 2010, In: Acta materialia. 58, p. 5520-5531

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Anisotropic fracture behavior of ultrafine-grained iron

    Hohenwarter, A. & Pippan, R., 2010, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 527, p. 2649-2656

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Anisotropy of the fracture behavior of severely deformed iron and a pearlitic rail steel

    Hohenwarter, A. & Pippan, R., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  16. Published

    Atomic Structure Characterization of Cu/MgO(001) Interfaces by CS-Corrected HRTEM

    Cazottes, S., Zhang, Z. L., Daniel, R., Gall, D. G. & Dehm, G., 2010, Proceedings 37th International Conference on Metallurgical Coatings and Thin Films. p. 14-14

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    Broadband optoacoustic measurements of ultrasound attenuation in severely plastically deformed nickel

    Pippan, R., Kazhushko, V. V., Paltauf, G., Krenn, H. & Scheriau, S., 2010, In: Journal of applied physics. p. 094905-094905

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Bulk Nanostructured Functional Materials By Severe Plastic Deformation

    Pippan, R., Zehetbauer, M., Grössinger, R., Krenn, H., Krystian, M., Rogl, P., Waitz, T. & Würschum, R., 2010, In: Advanced engineering materials. p. 692-700

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Can local hot spots induce alpha2/gamma lamellae during incomplete massive transformation of gamma-TiAl alloys?

    Fischer, F. D., Cha, L., Dehm, G. & Clemens, H., 2010, In: Intermetallics. 18, p. 972-976

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Characterisation of ion irradiated ferritic/martensitic materials for nuclear application

    Vieh, C., 2010

    Research output: Thesis › Diploma Thesis

  21. Published

    CHARACTERIZATION OF MICROSTRUCTURE AND FRACTURE BEHAVIOUR OF 7050 ALUMINIUM ALLOY AFTER HOT FORMING BY MEANS OF CHARPY IMPACT TESTING

    Pippan, R., Pöschmann, D., Henkel, C. & Uggowitzer, P., 2010, Fracture of Materials and Structures from Micro to Macro Scale. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. Published

    Charakterisierung des Verhaltens von Kanten aus hochfestem Werkzeugstahl unter zyklischer Belastung

    Gruber, P. J., 2010, 184 p.

    Research output: Thesis › Doctoral Thesis

  23. Published

    COMPARISON OF BENDING STRENGTH OF WC-CO HARD METAL IN MILLIMETER AND MICROMETER SIZED SPECIMENS

    Pippan, R., Klünsner, T., Wurster, S., Jenko, M., Ebner, R., Supancic, P., Glätzle, J. & Püschel, A., 2010, Fracture of Materials and Structures from Micro to Macro Scale. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. Published

    Cracks in Inhomogeneous Materials: Comprehensive Assessment Using the Configurational Forces Concepts

    Kolednik, O., Predan, J. & Fischer, F. D., 2010, In: Engineering Fracture Mechanics. 77, p. 2698-2711

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Cyclic loading behavior of micro-sized polycrystalline copper wires

    Yang, B., Motz, C., Grosinger, W. & Dehm, G., 2010, In: Procedia Engineering. 2, p. 925-930

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Cyclic response of copper single crystal micro-beams

    Kiener, D., Motz, C., Grosinger, W., Weygand, D. & Pippan, R., 2010, In: Scripta materialia. p. 500-503

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Dünne Stäbe - starke Wirkung

    Kolednik, O., 2010, In: Die Presse. p. 34-38

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Effect of Equal Channel Angular Pressing on the Fracture Behavior of Commercially Pure Titanium

    Pippan, R., Sabirov, I., Valiev, R. Z. & Semenova, I. P., 2010, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . p. 727-733

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Effect of microstructure on fatigue properties of WC-Co hard metals

    Pippan, R., Klünsner, T., Marsoner, S., Ebner, R., Glätzle, J. & Püschel, A., 2010, In: Procedia Engineering. p. 2001-2010

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Effect of Rhenium on the Dislocation Core Structure in Tungsten

    Pippan, R., Romaner, L. & Draxl, C., 2010, In: Physical review letters. p. 195503-195503

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Evolution of mechanical response and dislocation microstructures in small-scale specimens under slightly different loading conditions

    Motz, C., Senger, J., Weygand, D., Gumbsch, P. & Kraft, O., 2010, In: Philosophical magazine. p. 617-628

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Experimental validation of microstructure evolution in crystalline materials

    Rehrl, C., Kleber, S., Antretter, T. & Pippan, R., 2010, In: Journal of physics / Conference series. p. 1-4

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Fatigue crack propagation in threshold regime under residual stresses

    Pippan, R., Predan, J. & Gubeljak, N., 2010, In: International Journal of Fatigue. p. 1050-1056

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Final report J 2834-N20

    Kiener, D., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  35. Published

    Fracture and Delamination of Chromium Thin Films on Polymer Substrates

    Cordill, M., Taylor, A., Schalko, J. & Dehm, G., 2010, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . p. 870-875

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Fracture Behavior of Tungsten

    Gludovatz, B. P., 2010

    Research output: Thesis › Doctoral Thesis

  37. Published

    Fracture of severe plastic deformed nickel comparison of micro & macro samples

    Pippan, R. & Rathmayr, G., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  38. Published

    Fracture of ultrafine-grained metals produced by severe plastic deformation

    Hohenwarter, A., 2010

    Research output: Thesis › Doctoral Thesis

  39. Published

    Fracture toughness of polycrystalline tungsten alloys

    Pippan, R., Gludovatz, B., Wurster, S. & Hoffmann, A., 2010, In: International journal of refractory metals & hard materials. p. 674-678

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    High temperature fracture experiments on tungsten–rhenium alloys

    Pippan, R., Wurster, S. & Gludovatz, B., 2010, In: International journal of refractory metals & hard materials. p. 692-697

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Homogeneous Cu–Fe supersaturated solid solutions prepared by severe plastic deformation

    Pippan, R., Quelennec, X., Menand, A., LaBretona, J. M. & Sauvage, X., 2010, In: Philosophical magazine. p. 1179-1195

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Influence of stacking fault energy and alloying on stage V hardening of HPT-deformed materials

    Pippan, R. & Hafok, M., 2010, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. p. 1097-1104

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Influence of Yttrium on the Thermal Stability of Ti-Al-N Thin Films

    Moser, M., Kiener, D., Scheu, C. & Mayrhofer, P. H., 2010, In: Materials. 3, p. 1573-1592

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    In situ TEM study of Bauschinger Effect in Freestanding Nanocrystalline Gold Films

    Rajagoplan, J., Rentenberger, C., Karnthaler, H. P. & Dehm, G., 2010, In: Acta materialia. 58, p. 4772-4782

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Investigation of the fatigue behavior of Al thin films with different microstructure

    Dehm, G., Heinz, W. & Pippan, R., 2010, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. p. 7757-7763

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    KKKÖ Meeting

    Dehm, G., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  47. Published

    Laying the groundwork - The search for damage resistant materials

    Dehm, G., 2010, In: Public service review: European science & technology : an independent reviewPublic Service Review. 5, p. 76-77

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Learning from Nature

    Kolednik, O., Fratzl, P. & Fischer, F. D., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  49. Published

    Limitations in the refinement by severe plastic deformation: The effect of processing

    Pippan, R., Bachmaier, A., Hafok, M. & Schuster, R., 2010, Rev.Adv.Mater.Sci. 25. p. 16-22

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  50. Published

    Limits of Deformability in Hot Forming

    Trattnig, G., 2010, 182 p.

    Research output: Thesis › Doctoral Thesis

  51. Published

    Local and global measures of the fracture toughness of metal matrix composites

    Kolednik, O. & Sabirov, I., 2010, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. p. 3100-3110

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Magnetic characteristics of HPT deformed soft-magnetic materials

    Pippan, R., Scheriau, S., Kriegisch, M., Kleber, S., Mehboob, N. & Grössinger, R., 2010, In: Journal of magnetism and magnetic materials. p. 2984-2988

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    Metallic composites processed via extreme deformation: Toward the limits of strength in bulk materials

    Pippan, R., Raabe, D., Choi, P. P., Li, Y., Kostka, A., Sauvage, X., Lecouturier, F., Hono, K., Kirchheim, R. & Embury, D., 2010, In: MRS Bulletin. p. 092-991

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    Methodology for studying strain inhomogeneities in polycrystalline thin films during in situ thermal loading using coherent x-ray diffraction

    Vaxelaire, N., Proudhon, H., Labat, S., Kirchlechner, C., Keckes, J., Jaques, V., Ravy, S., Forest, S. & Thomas, O., 2010, In: New journal of physics. p. 1-12

    Research output: Contribution to journal › Article › Research › peer-review

  55. Published

    Micrometer-Sized Specimen Preparation Based on Ion Slicing Technique

    Pippan, R., Wurster, S., Motz, C. & Jenko, M., 2010, In: Advanced engineering materials. p. 61-63

    Research output: Contribution to journal › Article › Research › peer-review

  56. Published

    Micron-sized fracture experiments on amorphous SiOx films and SiOx/SiNx multi-layers

    Matoy, K., Schönherr, H., Detzel, T. & Dehm, G., 2010, In: Thin solid films. 518, p. 5796-5801

    Research output: Contribution to journal › Article › Research › peer-review

  57. Published

    Microplasticity phenomena in thermomechanically strained nickel thin films

    Taylor, A., Oh, S. H. & Dehm, G., 2010, In: Journal of materials science. 45, p. 3874-3881

    Research output: Contribution to journal › Article › Research › peer-review

  58. Published

    Microstructural evolution during SPD of AlCu3

    Faller, M. J., 2010

    Research output: Thesis › Diploma Thesis

  59. Published

    Microstructure and mechanical properties of UFG medium carbon steel processed by HPT at increased temperature

    Pippan, R., Zrnik, J., Scheriau, S., Kraus, L. & Fujda, M., 2010, In: Journal of materials science. p. 4822-4826

    Research output: Contribution to journal › Article › Research › peer-review

  60. Published

    Microstructure evolution and strength response of ultrafine grain medium carbon steel processed by high pressure torsion

    Pippan, R., Zrnik, J. & Scheriau, S., 2010, In: Journal of physics / Conference series. p. 012131-012131

    Research output: Contribution to journal › Article › Research › peer-review

  61. Published

    Mikrostrukturelle Analyse von thermomechanisch verformten und ermüdeten Al Schichten

    Heinz, W., 2010, 129 p.

    Research output: Thesis › Doctoral Thesis

  62. Published

    Mitigating Focused Ion Beam Damage in Molybdenum Nanopillars by In Situ Annealing

    Lowry, M. B., Kiener, D., Le Blanc, B. B., Chisholm, C., Florando, J. N., Morris, J. W. J. & Minor, A. M., 2010, In: Microscopy and microanalysis. 16, p. 1748-1749

    Research output: Contribution to journal › Article › Research › peer-review

  63. Published

    Multiscale Modelling of Plasticity and Fracture by Means of Dislocation Mechanics

    Pippan, R. & Gumbsch, P., 2010

    Research output: Book/Report › Book › Research

  64. Published

    Nano-Beam X-ray Diffraction Reveals Structural and Mechanical Gradients in Nano-Crystalline Thin Films

    Keckes, J., Bartosik, M., Daniel, R., Mitterer, C., Maier, G., Schoeder, S. & Burghammer, M., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  65. Published

    Nanoindentation of wet and dry compact bone: Influence of environment and indenter tip geometry on the indentation modulus

    Jäger, I., Guidoni, G. & Swain, M., 2010, In: Philosophical magazine. p. 553-565

    Research output: Contribution to journal › Article › Research › peer-review

  66. Published

    Nano-scale sliding contact deformation behaviour of enamel under wet and dry conditions

    Jäger, I., Guidoni, G. & Swain, M., 2010, In: Journal of materials science / Materials in medicine. p. 1195-1203

    Research output: Contribution to journal › Article › Research › peer-review

  67. Published

    Neue Werkstoffe aus plastischer Hochverformung Nanokristalline Metalle

    Pippan, R., Hohenwarter, A., Scheriau, S. & Bachmaier, A., 2010, In: Physik in unserer Zeit. p. 23-29

    Research output: Contribution to journal › Article › Research › peer-review

  68. Published

    NOTCHED-CANTILEVER TESTING ON THE MICROMETER SCALE – EFFECTS OF CONSTRAINTS ON PLASTICITY AND FRACTURE BEHAVIOUR

    Pippan, R., Wurster, S. & Motz, C., 2010, Fracture of Materials and Structures from Micro to Macro Scale. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  69. Published

    Numerical analysis on special cracking phenomena of residual compressive inter-layers in ceramic laminates

    Chen, C., Bermejo Moratinos, R. & Kolednik, O., 2010, In: Engineering Fracture Mechanics. 77, p. 2567-2576

    Research output: Contribution to journal › Article › Research › peer-review

  70. Published

    Numerische Studien zur Ermittlung der risstreibenden Kraft in elastisch-plastischen Materialien bei unterschiedlichen Belastungsbedingungen

    Schöngrundner, R., 2010, 192 p.

    Research output: Thesis › Doctoral Thesis

  71. Published

    Overview of the Grain Size Effects on the Mechanical and Deformation Behaviour of Electrodeposited Nanocrystalline Nickel - from Nanoindentation to High Pressure Torsion

    Pippan, R., Yang, B. & Vehoff, H., 2010, In: Materials Science Forum . p. 85-98

    Research output: Contribution to journal › Article › Research › peer-review

  72. Published

    Perylene-Labeled Silica Nanoparticles: Synthesis and Characterization of Three Novel Silica Nanoparticle Species for Live-Cell Imaging

    Blechinger, J., Herrmann, R., Kiener, D., Garcia-Garcia, F. J., Scheu, C., Reller, A. & Bräuchle, C., 2010, In: Small. 6, p. 2427-2435

    Research output: Contribution to journal › Article › Research › peer-review

  73. Published

    Quantitative In Situ Mechanical Testing in Electron Microscopes

    Motz, C., Legros, M. & Gianola, D. S., 2010, In: Procedia Engineering. p. 925-930

    Research output: Contribution to journal › Article › Research › peer-review

  74. Published

    Quantitative uniaxial in situ testing of Cu in a TEM

    Kiener, D., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  75. Published

    Rate Independent and Rate Dependent Structural Evolution during Severe Plastic Deformation

    Pippan, R., Bachmaier, A. & Hafok, M., 2010, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . p. 8-13

    Research output: Contribution to journal › Article › Research › peer-review

  76. Published

    Recrystallization and grain growth behavior of SPD deformed 316L stainless steel

    Pippan, R., Scheriau, S., Schöberl, T. & Kleber, S., 2010, In: Advanced materials. p. 491-496

    Research output: Contribution to journal › Article › Research › peer-review

  77. Published

    Residual stresses and thermal fatigue in CrN hard coatings characterized by high-temperature synchrotron X-ray diffraction

    Kirchlechner, C., Martinschitz, K. J., Daniel, R., Klaus, M., Genzel, C., Mitterer, C. & Keckes, J., 2010, In: Thin solid films. 518, 8, p. 2090-2096

    Research output: Contribution to journal › Article › Research › peer-review

  78. Published

    Review: current international research into cellulose nanofibres and nanocomposites

    Keckes, J., Eichhorn, S. J., Dufresne, A., Aranguren, M., Marcovich, N. E., Capadona, J. R., Rowan, S. J., Weder, C., Thielemans, W., Roman, M., Renneckar, S., Gindl, W., Veigel, S., Yano, H., Abe, K., Nogi, M. & Nakagaito, A. N., 2010, In: Journal of materials science. p. 1-33

    Research output: Contribution to journal › Article › Research › peer-review

  79. Published

    Saturation of Fragmentation During Severe Plastic Deformation

    Pippan, R., Scheriau, S., Taylor, A., Hafok, M., Hohenwarter, A. & Bachmaier, A., 2010, In: Annual review of materials research. 40, p. 319-343

    Research output: Contribution to journal › Article › Research › peer-review

  80. Published

    Spröd-duktil-Übergang von ultra-feinkörnigem Eisen

    Kammerhofer, C. N., 2010, 100 p.

    Research output: Thesis › Diploma Thesis

  81. Published

    Stress, Sheet Resistance, and Microstructure Evolution of Electroplated Cu Films During Self-Annealing

    Huang, R., Robl, W., Ceric, H., Detzel, T. & Dehm, G., 2010, In: IEEE transactions on device and materials reliability. 10, 1, p. 47-54

    Research output: Contribution to journal › Article › Research › peer-review

  82. Published

    Structural characterization of a Cu/MgO(001) interface using C S-corrected HRTEM

    Cazottes, S., Zhang, Z. L., Daniel, R., Chawla, J. S., Gall, D. & Dehm, G., 2010, In: Thin solid films.

    Research output: Contribution to journal › Article › Research › peer-review

  83. Published

    Structural characterization of a Cu/MgO(001) interface using CS-corrected HRTEM

    Cazottes, S., Zhang, Z., Daniel, R., Chawla, J. S., Gall, D. & Dehm, G., 2010, In: Thin solid films. 519, p. 1662-1667

    Research output: Contribution to journal › Article › Research › peer-review

  84. Published

    Studying radiation damage on structural materials using ion beam accelerators and small-scale materials testing

    Hosemann, P., Was, G. S., Fluss, M., Hattar, K., Brewer, L. N., Kiener, D., Zhang, X., Wang, H., Shao, L. & Maloy, S. A., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  85. Published

    Study of nanometer-scaled lamellar microstructure in a Ti-45Al-7.5Nb alloy-Experiments and modeling

    Fischer, F. D., Waitz, T., Scheu, C., Cha, L., Dehm, G., Antretter, T. & Clemens, H., 2010, In: Intermetallics. 18, p. 509-517

    Research output: Contribution to journal › Article › Research › peer-review

  86. Published

    TEM Untersuchungen von Verformungsstrukturen in miniaturisierten Kupferproben

    Imrich, P. J., 2010

    Research output: Thesis › Diploma Thesis

  87. Published

    Testing the Application of the Shear Lag Approximation to Thin Films on Cu and Polymer Substrates

    Taylor, A., Cordill, M., Edlmayr, V., Raj, R. & Dehm, G., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  88. Published

    The ductile to brittle transition of ultrafine-grained Armco iron: an experimental study

    Hohenwarter, A., Kammerhofer, C. & Pippan, R., 2010, In: Journal of materials science. 54, p. 4805-4812

    Research output: Contribution to journal › Article › Research › peer-review

  89. Published

    The origin of stresses in magnetron-sputtered thin films with zone T structures

    Daniel, R., Martinschitz, K., Keckes, J. & Mitterer, C., 2010, In: Acta materialia. 58, p. 2621-2633

    Research output: Contribution to journal › Article › Research › peer-review

  90. Published

    The relationship between structure and mechanical properties of hydrogenated amorphous carbon films

    Schöberl, T., Kahn, M., Paskvale, S., Cekada, M., Waldhauser, W., Mitterer, C., Pelinconb, P. & Brandstätter, E., 2010, In: Diamond and related materials. p. 1245-1248

    Research output: Contribution to journal › Article › Research › peer-review

  91. Published

    Thermal behavior of Ni (99.967% and 99.5% purity) deformed to an ultra-high strain by high pressure torsion

    Pippan, R., Zhang, H. W., Huang, X. & Hansen, N., 2010, In: Acta materialia. p. 1698-1707

    Research output: Contribution to journal › Article › Research › peer-review

  92. Published

    Thermally-induced formation of hexagonal AlN in AlCrN hard coatings on sapphire: Orientation relationships and residual stresses

    Bartosik, M., Daniel, R., Mitterer, C. & Keckes, J., 2010, In: Surface & coatings technology. 205, p. 1320-1323

    Research output: Contribution to journal › Article › Research › peer-review

  93. Published

    X-ray diffraction analysis of three-dimensional residual stress fields reveals origins of thermal fatigue in uncoated and coated steel

    Kirchlechner, C., Martinschitz, K. J., Daniel, R., Mitterer, C., Donges, J., Rothkirch, A., Klaus, M., Genzel, C. & Keckes, J., 2010, In: Scripta materialia. 62, p. 774-777

    Research output: Contribution to journal › Article › Research › peer-review

  94. 2009
  95. Published

    A case study on the effect of thermal residual stresses on the crack-driving force in linear-elastic bimaterials

    Rakin, M., Kolednik, O., Medjo, B., Simha, N. K. & Fischer, F. D., 2009, In: International Journal of Mechanical Sciences. p. 531-540

    Research output: Contribution to journal › Article › Research › peer-review

  96. Published

    A comparative micro-cantilever study of the mechanical behavior of silicon based passivation films

    Matoy, K., Schönherr, H., Detzel, T., Schöberl, T., Pippan, R., Motz, C. & Dehm, G., 2009, In: Thin solid films. 518, p. 247-256

    Research output: Contribution to journal › Article › Research › peer-review

  97. Published

    Actual versus apparent within cell wall variability of nanoindentation results from wood cell walls related to cellulose microfibril angle

    Konnerth, J., Gierlinger, N., Keckes, J. & Gindl, W., 2009, In: Journal of materials science. 44, p. 4399-4406

    Research output: Contribution to journal › Article › Research › peer-review

  98. Published

    A novel preparation route to obtain micro-bending beams for in-situ TEM-studies

    Moser, G., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  99. Published

    A novel route for the synthesis of nanocomposite tungsten carbide–cobalt using a biopolymer as a carbon source

    Holgate, M. W. R., Schöberl, T. & Hall, S. R., 2009, In: Journal of sol-gel science and technology. 49, p. 145-149

    Research output: Contribution to journal › Article › Research › peer-review

  100. Published

    Application of SPM and Related Techniques to the Mechanical Properties of Biotool Materials

    Schöberl, T., Jäger, I. & Lichtenegger, H., 2009, Applied Scanning Probe Methods XIII - Biomimetics and Industrial Application. p. 71-104

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  101. Published

    Can micro-compression testing provide stress-strain data for thin films? A comparative study using Cu, VN, TiN and W coatings

    Dehm, G., Wörgötter, H.-P., Cazottes, S., Purswani, J. M., Gall, D., Mitterer, C. & Kiener, D., 2009, In: Thin solid films. 518, p. 1517-1521

    Research output: Contribution to journal › Article › Research › peer-review

  102. Published

    Cellulose in never-dried gel oriented by an AC electric field

    Gindl, W., Emsenhuber, G., Maier, G. & Keckes, J., 2009, In: Biomacromolecules. 10, p. 1315-1318

    Research output: Contribution to journal › Article › Research › peer-review

  103. Published

    Changes in the Fracture Toughness of a Rail Steel Subjected to High Pressure Torsion

    Hohenwarter, A. & Pippan, R., 2009, Proceeding of the 12th International Conference on Fracture. p. 12-17

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Previous 1...11 12 13 14 15 16 17 18 ...20 Next
View graph of relations

Contact information

Jahnstrasse 12/I, 8700 Leoben
  • Main phone number: +43 3842 804 112