Gerhard Dehm

(Former)

Research output

  1. 2019
  2. Au–Sn solders applied in transient liquid phase bonding: Microstructure and mechanical behavior

    Du, C., Soeler, R., Völker, B., Matoy, K., Zechner, J., Langer, G., Reisinger, M., Todt, J., Kirchlechner, C. & Dehm, G., 1 Dec 2019, In: Materialia. 8.2019, 100503.

    Research output: Contribution to journalArticleResearchpeer-review

  3. 2015
  4. Published

    Interface fracture and chemistry of a tungsten-based metallization on borophosphosilicate glass

    Völker, B., Heinz, W., Matoy, K., Roth, R., Batke, J. M., Schöberl, T., Scheu, C. & Dehm, G., 23 Jun 2015, In: Philosophical magazine. 95, 16-18, p. 1967-1981 15 p.

    Research output: Contribution to journalArticleResearchpeer-review

  5. Published

    In Situ TEM Microcompression of Single and Bicrystalline Samples: Insights and Limitations

    Imrich, P. J., Kirchlechner, C., Kiener, D. & Dehm, G., 19 May 2015, In: JOM. 67, 8, p. 1704 1712 p.

    Research output: Contribution to journalArticleResearchpeer-review

  6. Published

    Internal and external stresses: In situ TEM compression of Cu bicrystals containing a twin boundary

    Imrich, P. J., Kirchlechner, C., Kiener, D. & Dehm, G., 15 Apr 2015, In: Scripta materialia. 100, p. 94-97 4 p.

    Research output: Contribution to journalArticleResearchpeer-review

  7. Published

    Cyclic bending experiments on free-standing Cu micron lines observed by electron backscatter diffraction

    Wimmer, A. C., Heinz, W., Detzel, T., Robl, W., Nellessen, M., Kirchlechner, C. & Dehm, G., 2015, In: Acta materialia. 83, p. 460-469

    Research output: Contribution to journalArticleResearchpeer-review

  8. 2014
  9. Published

    Auf Biegen und Brechen – Mikromechanik an miniaturisierten Materialien

    Kirchlechner, C. & Dehm, G., 2014, Max-Planck-Jahrbuch 2014. p. 1-10

    Research output: Chapter in Book/Report/Conference proceedingChapterResearch

  10. Published

    Differences in deformation behavior of bicrystalline Cu micropillars containing a twin boundary or a large-angle grain boundary

    Imrich, P., Kirchlechner, C., Motz, C. & Dehm, G., 2014, In: Acta materialia. 73, p. 240-250

    Research output: Contribution to journalArticleResearchpeer-review

  11. Published

    Intermetallic phase selection during homogenisation for AA6082 alloy

    Li, J., Wimmer, A. C., Dehm, G. & Schumacher, P., 2014, In: Philosophical magazine. p. 830-846

    Research output: Contribution to journalArticleResearchpeer-review

  12. 2013
  13. Published
  14. Published

    Elastoplastic Buckling as Source of Misinterpretation of Micropillar-Tests

    Daum, B., Dehm, G., Clemens, H., Rester, M., Fischer, F. D. & Rammerstorfer, F. G., 2013, In: Acta materialia. 61, p. 4996-5007

    Research output: Contribution to journalArticleResearchpeer-review

  15. Published

    Insights into the atomic and electronic structure triggered by ordered nitrogen vacancies in CrN

    Zhang, Z., Li, H., Daniel, R., Mitterer, C. & Dehm, G., 2013, In: Physical review : B, Condensed matter and materials physics. 87, p. 0141041-0141049

    Research output: Contribution to journalArticleResearchpeer-review

  16. Published

    Transmission electron microscopy characterization of CrN films on MgO(001)

    Harzer, T. P., Daniel, R., Mitterer, C., Dehm, G. & Zhang, Z. L., 2013, In: Thin solid films. 545, p. 154-160 7 p.

    Research output: Contribution to journalArticleResearchpeer-review

  17. 2012
  18. Published

    Advanced nanomechanics in the TEM: effects of thermal annealing on FIB prepared Cu samples

    Kiener, D., Zhang, Z., Sturm, S., Cazottes, S., Imrich, P. J., Kirchlechner, C. & Dehm, G., 2012, In: Philosophical magazine. 92, p. 3269-3289

    Research output: Contribution to journalArticleResearchpeer-review

  19. Published

    Expected and unexpected plastic behavior at the micron scale: An in situ μLaue tensile study

    Kirchlechner, C., Imrich, P., Grosinger, W., Kapp, M., Keckes, J., Micha, J.-S., Ulrich, O., Thomas, O., Labat, S., Motz, C. & Dehm, G., 2012, In: Acta materialia. 60, p. 1252-1258

    Research output: Contribution to journalArticleResearchpeer-review

  20. Published

    Influence of impurity elements on the nucleation and growth of Si in high purity melt-spun Al–Si-based alloys

    Li, J., Zarif, M. Z., Dehm, G. & Schumacher, P., 2012, In: Philosophical magazine. 92, p. 3789-3805

    Research output: Contribution to journalArticleResearchpeer-review

  21. Published

    In-situ Electron Microscopy,

    Dehm, G., 2012

    Research output: Book/ReportBookResearch

  22. Published

    In-situ fracture study of thin Cu films on polyimide substrate

    Marx, V. M., Kirchlechner, C., Zizak, I., Dehm, G. & Cordill, M. J., 2012.

    Research output: Contribution to conferencePosterResearchpeer-review

  23. Published

    In Situ Study of Gamma-TiAl Lamellae Formation in Supersaturated alpha 2-Ti3Al Grains

    Cha, L., Schmölzer, T., Zhang, Z., Mayer, S., Clemens, H., Staron, P. & Dehm, G., 2012, In: Advanced engineering materials. 14, p. 299-303

    Research output: Contribution to journalArticleResearchpeer-review

  24. Published

    In-situ TEM Straining Experiments: Recent Progress in Stages and Small-Scale Mechanics

    Dehm, G., Legros, M. & Kiener, D., 2012, In-situ Electron Microscopy. p. 227-254

    Research output: Chapter in Book/Report/Conference proceedingChapterResearch

  25. Published

    Investigation of reversible plasticity in a micron-sized, single crystalline copper bending beam by X-ray µLaue diffraction

    Kirchlechner, C., Grosinger, W., Kapp, M. W., Imrich, P. J., Micha, J.-S., Ulrich, O., Keckes, J., Dehm, G. & Motz, C., 2012, In: Philosophical magazine. p. 3231-3242

    Research output: Contribution to journalArticleResearchpeer-review

  26. Published

    Microstructure evolution and grain refinement processes in the intermetallic TiAl-Mo alloy system

    Rashkova, B., Sailer, C., Clemens, H., Schöberl, T., Spiradek-Hahn, K., Brabetz, M., Dehm, G. & Mayer, S., 2012.

    Research output: Contribution to conferencePosterResearchpeer-review

  27. Published

    Novel temperature dependent tensile test of freestanding copper thin film structures

    Smolka, M., Motz, C., Detzel, T., Robl, W., Grießer, T., Wimmer, A. C. & Dehm, G., 2012, In: Review of scientific instruments. Jun;(6), p. 064702/1-064702/9

    Research output: Contribution to journalArticleResearchpeer-review

  28. Published

    Quantitative Approaches for in situ SEM and TEM Deformation Studies

    Dehm, G., Kiener, D., Motz, C., Pippan, R. & Smolka, M., 2012, In: Microscopy and microanalysis. 18, p. 736-737

    Research output: Contribution to journalArticleResearchpeer-review

  29. Published

    Sample Preparation by Metallography and Focused Ion Beam for Nanomechanical Testing

    Moser, G., Felber, H., Rashkova, B., Imrich, P. J., Kirchlechner, C., Grosinger, W., Motz, C., Dehm, G. & Kiener, D., 2012, In: Practical metallography = Praktische Metallographie. 49, p. 343-355

    Research output: Contribution to journalArticleResearchpeer-review

  30. Published

    TEM characterization of CrN thin films epitaxially grown on MgO (001)

    Harzer, T. P., Kormout, K., Daniel, R., Mitterer, C., Dehm, G. & Zhang, Z. L., 2012.

    Research output: Contribution to conferencePosterResearchpeer-review

  31. 2011
  32. Published

    Advanced characterisation of the Cu-MgO interface structure by Cs-corrected high-resolution transmission electron microscopy

    Zhang, Z., Daniel, R., Dehm, G. & Mitterer, C., 2011.

    Research output: Contribution to conferencePosterResearchpeer-review

  33. Published

    A Mechanical Method for Preparing TEM Samples from Brittle Films on Compliant Substrates

    Taylor, A. A., Cordill, M., Moser, G. & Dehm, G., 2011, In: Practical metallography = Praktische Metallographie. 48, p. 408-413

    Research output: Contribution to journalArticleResearchpeer-review

  34. Published

    Deformation behavior of miniaturized copper bicrystals and corresponding dislocation boundary reactions

    Imrich, P. J., Kirchlechner, C., An, X., Zhang, Z. & Dehm, G., 2011.

    Research output: Contribution to conferencePosterResearchpeer-review

  35. Published

    Deformation Mechanisms in Micron-Sized PST-TiAl Compression Samples: Experiment and Model

    Rester, M., Fischer, F. D., Kirchlechner, C., Schmölzer, T., Clemens, H. & Dehm, G., 2011, In: Acta materialia. 59, p. 3410-3421

    Research output: Contribution to journalArticleResearchpeer-review

  36. Published

    Dislocation plasticity of Al film on polyimide investigated by cross-sectional in situ transmission electron microscopy straining

    Oh, S. H., Rentenberger, C., Im, J., Motz, C., Kiener, D., Karnthaler, H.-P. & Dehm, G., 2011, In: Scripta materialia. 65, p. 456-459

    Research output: Contribution to journalArticleResearchpeer-review

  37. Published

    Dislocation storage in single slip oriented Cu micro-tensile samples: New insights by X-ray microdiffraction

    Kirchlechner, C., Kiener, D., Motz, C., Labat, S., Vaxelaire, N., Perroud, O., Micha, J.-S., Ulrich, O., Thomas, O., Dehm, G. & Keckes, J., 2011, In: Philosophical magazine. 91, p. 1256-1264

    Research output: Contribution to journalArticleResearchpeer-review

  38. Published

    Electrical properties and structure of grain boundaries in n-conducting BaTiO3 ceramics

    Hou, J., Zhang, Z., Preis, W., Sitte, W. & Dehm, G., 2011, In: Journal of the European Ceramic Society. p. 763-771

    Research output: Contribution to journalArticleResearchpeer-review

  39. Published

    Examples of scanning transmission electron microscopy for microstructural characterization of alloys

    Rashkova, B., Thomas, J., Moser, G., Rester, M. & Dehm, G., 2011.

    Research output: Contribution to conferencePosterResearchpeer-review

  40. Published

    Impact of instrumental constraints and imperfections on the dislocation structure in micron-sized Cu compression pillars

    Kirchlechner, C., Keckes, J., Motz, C., Grosinger, W., Kapp, M. W., Micha, J.-S., Ulrich, O. & Dehm, G., 2011, In: Acta materialia. 59, p. 5618-5626

    Research output: Contribution to journalArticleResearchpeer-review

  41. Published

    In-situ TEM heating study of the y lamellae formation inside the alpha2 matrix of a Ti-45Al-7.5Nb alloy

    Cha, L., Clemens, H., Dehm, G. & Zhang, Z., 2011, In: Advanced materials. 146-147, p. 1365-1368

    Research output: Contribution to journalArticleResearchpeer-review

  42. Published

    In situ µLaue: Instrumental setup for the deformation of micron sized samples

    Kirchlechner, C., Keckes, J., Micha, J.-S. & Dehm, G., 2011, In: Advanced engineering materials. 13, p. 837-844

    Research output: Contribution to journalArticleResearchpeer-review

  43. Published
  44. Published
  45. Published

    Physical Metallurgy and Properties of ß-solidifying TiAl Based Alloys

    Clemens, H., Schmölzer, T., Schloffer, M., Schwaighofer, E., Mayer, S. & Dehm, G., 2011, Materials Research Society symposium proceedings Volume 1295. Materials Research Society : MRS, p. 95-100

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  46. Published

    The effect of film thickness variations in peridic cracking: Analysis and experiments

    Taylor, A. A., Edlmayr, V., Cordill, M. & Dehm, G., 2011, In: Surface & coatings technology. 206, p. 1830-1836

    Research output: Contribution to journalArticleResearchpeer-review

  47. Published

    The effect of temperature and strain rate on the periodic cracking of amorphous AlxOy films on Cu

    Taylor, A. A., Edlmayr, V., Cordill, M. & Dehm, G., 2011, In: Surface & coatings technology. 206, p. 1855-1859

    Research output: Contribution to journalArticleResearchpeer-review

  48. Published

    Work hardening in micropillar compression: In situ experiments and modeling

    Kiener, D., Guruprasad, P. J., Keralavarma, S. M., Dehm, G. & Benzerga, A. A., 2011, In: Acta materialia. 59, p. 3825-3840

    Research output: Contribution to journalArticleResearchpeer-review

  49. Published

    µLaue: Compression studies on miniaturised Copper single crystals

    Kirchlechner, C., Kapp, M., Motz, C., Grosinger, W., Keckes, J., Micha, J.-S., Ulrich, O. & Dehm, G., 2011.

    Research output: Contribution to conferencePosterResearchpeer-review

  50. 2010
  51. Published

    Adhesion Energies of Cr Thin Films on Polyimide Determined from Buckling: Experiment and Model

    Cordill, M., Fischer, F. D., Rammerstorfer, F. G. & Dehm, G., 2010, In: Acta materialia. 58, p. 5520-5531

    Research output: Contribution to journalArticleResearchpeer-review

  52. Published

    Atomic Structure Characterization of Cu/MgO(001) Interfaces by CS-Corrected HRTEM

    Cazottes, S., Zhang, Z. L., Daniel, R., Gall, D. G. & Dehm, G., 2010, Proceedings 37th International Conference on Metallurgical Coatings and Thin Films. p. 14-14

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  53. Published

    Can local hot spots induce alpha2/gamma lamellae during incomplete massive transformation of gamma-TiAl alloys?

    Fischer, F. D., Cha, L., Dehm, G. & Clemens, H., 2010, In: Intermetallics. 18, p. 972-976

    Research output: Contribution to journalArticleResearchpeer-review

  54. Published

    Cyclic loading behavior of micro-sized polycrystalline copper wires

    Yang, B., Motz, C., Grosinger, W. & Dehm, G., 2010, In: Procedia Engineering. 2, p. 925-930

    Research output: Contribution to journalArticleResearchpeer-review

  55. Published
  56. Published

    In situ TEM study of Bauschinger Effect in Freestanding Nanocrystalline Gold Films

    Rajagoplan, J., Rentenberger, C., Karnthaler, H. P. & Dehm, G., 2010, In: Acta materialia. 58, p. 4772-4782

    Research output: Contribution to journalArticleResearchpeer-review

  57. Published

    In situ μLaue tensile tests on micron sized Cu single crystals

    Kirchlechner, C., Imrich, P., Grosinger, W., Kapp, M., Motz, C., Keckes, J. & Dehm, G., 2010.

    Research output: Contribution to conferencePosterResearchpeer-review

  58. Published
  59. Published

    KKKÖ Meeting

    Dehm, G., 2010

    Research output: Book/ReportCommissioned reportTransferpeer-review

  60. Published
  61. Published

    Micron-sized fracture experiments on amorphous SiOx films and SiOx/SiNx multi-layers

    Matoy, K., Schönherr, H., Detzel, T. & Dehm, G., 2010, In: Thin solid films. 518, p. 5796-5801

    Research output: Contribution to journalArticleResearchpeer-review

  62. Published

    Microplasticity phenomena in thermomechanically strained nickel thin films

    Taylor, A., Oh, S. H. & Dehm, G., 2010, In: Journal of materials science. 45, p. 3874-3881

    Research output: Contribution to journalArticleResearchpeer-review

  63. Published

    Stress, Sheet Resistance, and Microstructure Evolution of Electroplated Cu Films During Self-Annealing

    Huang, R., Robl, W., Ceric, H., Detzel, T. & Dehm, G., 2010, In: IEEE transactions on device and materials reliability. 10, 1, p. 47-54

    Research output: Contribution to journalArticleResearchpeer-review

  64. Published

    Structural characterization of a Cu/MgO(001) interface using C S-corrected HRTEM

    Cazottes, S., Zhang, Z. L., Daniel, R., Chawla, J. S., Gall, D. & Dehm, G., 2010, In: Thin solid films.

    Research output: Contribution to journalArticleResearchpeer-review

  65. Published

    Structural characterization of a Cu/MgO(001) interface using CS-corrected HRTEM

    Cazottes, S., Zhang, Z., Daniel, R., Chawla, J. S., Gall, D. & Dehm, G., 2010, In: Thin solid films. 519, p. 1662-1667

    Research output: Contribution to journalArticleResearchpeer-review

  66. Published

    Study of nanometer-scaled lamellar microstructure in a Ti-45Al-7.5Nb alloy-Experiments and modeling

    Fischer, F. D., Waitz, T., Scheu, C., Cha, L., Dehm, G., Antretter, T. & Clemens, H., 2010, In: Intermetallics. 18, p. 509-517

    Research output: Contribution to journalArticleResearchpeer-review

  67. Published

    Testing the Application of the Shear Lag Approximation to Thin Films on Cu and Polymer Substrates

    Taylor, A., Cordill, M., Edlmayr, V., Raj, R. & Dehm, G., 2010.

    Research output: Contribution to conferencePosterResearchpeer-review

  68. Published

    Unveiling the atomic and electronic structure of the VN/MgO interface

    Dehm, G., Zhang, Z., Rashkova, B., Lazar, P., Redinger, J. & Podloucky, R., 2010, In: Physical review : B, Condensed matter and materials physics. 82, p. 060103(R) -060103(R)

    Research output: Contribution to journalArticleResearchpeer-review

  69. 2009
  70. Published

    A comparative micro-cantilever study of the mechanical behavior of silicon based passivation films

    Matoy, K., Schönherr, H., Detzel, T., Schöberl, T., Pippan, R., Motz, C. & Dehm, G., 2009, In: Thin solid films. 518, p. 247-256

    Research output: Contribution to journalArticleResearchpeer-review

  71. Published

    Can micro-compression testing provide stress-strain data for thin films? A comparative study using Cu, VN, TiN and W coatings

    Dehm, G., Wörgötter, H.-P., Cazottes, S., Purswani, J. M., Gall, D., Mitterer, C. & Kiener, D., 2009, In: Thin solid films. 518, p. 1517-1521

    Research output: Contribution to journalArticleResearchpeer-review

  72. Published

    Deformation twinning in Ni-Mn-Ga micropillars with 10M martensite

    Reinhold, M., Kiener, D., Knowlton, W. B., Dehm, G. & Müllner, P., 2009, In: Journal of applied physics. 106, p. 053906-1-053906-6

    Research output: Contribution to journalArticleResearchpeer-review

  73. Published

    Fracture and Delamination of Chromium Thin Films on Polymer Substrates

    Cordill, M., Taylor, A., Schalko, J. & Dehm, G., 2009, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . p. 1-6

    Research output: Contribution to journalArticleResearchpeer-review

  74. Published

    Influence of the indenter tip geometry and environment on the indentation modulus of enamel

    Guidoni, G. M., He, L. H., Schöberl, T., Jäger, I., Dehm, G. & Swain, M. V., 2009, In: Journal of materials research (JMR). 24, p. 616-625

    Research output: Contribution to journalArticleResearchpeer-review

  75. Published

    Initial Stages of Lamellae Formation in High Nb Containing gamma-TiAl Based Alloys

    Cha, L., Scheu, C., Dehm, G., Schnitzer, R. & Clemens, H., 2009, Initial Stages of Lamellae Formation in High Nb Containing gamma-TiAl Based Alloys. Materials Research Society : MRS, p. 153-158

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  76. Published

    In situ observation of dislocation nucleation and escape in a submicrometre aluminium single crystal

    Oh, S. H., Legros, M. J., Kiener, D. & Dehm, G., 2009, In: Nature Materials. 8, p. 95-100

    Research output: Contribution to journalArticleResearchpeer-review

  77. Published

    Interface fracture properties of thin films studied by using the micro-cantilever deflection technique

    Matoy, K., Detzel, T., Müller, M., Motz, C. & Dehm, G., 2009, In: Surface & coatings technology. 204, p. 878-881

    Research output: Contribution to journalArticleResearchpeer-review

  78. Published
  79. Published

    Micro tensile tests: New insights based on µDiffraction

    Kirchlechner, C., Motz, C., Grosinger, W., Labat, S., Perroud, O., Thomas, O., Micha, J.-S., Ulrich, O., Dehm, G. & Keckes, J., 2009.

    Research output: Contribution to conferencePosterResearchpeer-review

  80. Published

    Miniaturized single-crystalline fcc metals deformed in tension: New insights in size-dependent plasticity

    Dehm, G., 2009, In: Progress in materials science. 54, p. 664-688

    Research output: Contribution to journalArticleResearchpeer-review

  81. Published

    On the importance of sample compliance in uniaxial microtesting

    Kiener, D., Grosinger, W. & Dehm, G., 2009, In: Scripta materialia. 60, p. 148-151

    Research output: Contribution to journalArticleResearchpeer-review

  82. Published

    Overview on established and novel FIB based miniaturized mechanical testing using in-situ SEM

    Kiener, D., Motz, C., Dehm, G. & Pippan, R., 2009, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 100, p. 1074-1087

    Research output: Contribution to journalArticleResearchpeer-review

  83. Published

    Revealing deformation mechanisms in small dimensions with micro-compression and nanoindentation tests

    Rester, M., Kirchlechner, C., Motz, C., Pippan, R., Clemens, H. & Dehm, G., 2009.

    Research output: Contribution to conferencePosterResearchpeer-review

  84. Published
  85. 2008
  86. Published

    A further step towards an understanding of size-dependent crystal plasticity: In-situ tension experiments of miniaturized single crystal copper samples

    Kiener, D., Grosinger, W., Dehm, G. & Pippan, R., 2008, In: Acta materialia. 56, p. 580-592

    Research output: Contribution to journalArticleResearchpeer-review

  87. Published

    Crystal rotation in Cu single crystal micropillars: In situ Laue and electron backscatter diffraction

    Maaß, R., Van Petegem, S., Grolimund, D., Van Swygenhoven, H., Kiener, D. & Dehm, G., 2008, In: Applied physics letters. 92, p. 071905-1-071905-4

    Research output: Contribution to journalArticleResearchpeer-review

  88. Published

    Dislocation-induced crystal rotations in micro-compressed single crystal copper columns

    Kiener, D., Motz, C. & Dehm, G., 2008, In: Journal of materials science. 43, p. 2503-2506

    Research output: Contribution to journalArticleResearchpeer-review

  89. Published

    Influence of external and internal length scale on the flow stress of copper

    Dehm, G., 2008.

    Research output: Contribution to conferencePosterResearchpeer-review

  90. Published

    Interface structure of epitaxial (111) VN films on (111) MgO substrates

    Lazar, P., Rashkova, B., Redinger, J., Podloucky, R., Mitterer, C., Scheu, C. & Dehm, G., 2008, In: Thin solid films. 517, p. 1177-1181

    Research output: Contribution to journalArticleResearchpeer-review

  91. Published

    Nanometer-scaled lamellar microstructures in Ti–45Al–7.5Nb–(0; 0.5)C alloys and their influence on hardness

    Cha, L., Scheu, C., Clemens, H., Chladil, H., Dehm, G., Gerling, R. & BARTELS, A., 2008, In: Intermetallics. 16, p. 868-875

    Research output: Contribution to journalArticleResearchpeer-review

  92. Published

    N-K electron energy-loss near-edge structures for TiN/VN layers: an ab-initio and experimental study

    Lazar, P., Redinger, J., Strobl, J., Podloucky, R., Rashkova, B., Dehm, G., Kothleitner, G., Sturm, S., Kutschej, K., Mitterer, C. & Scheu, C., 2008, In: Analytical and bioanalytical chemistry. 390, p. 1447-1453

    Research output: Contribution to journalArticleResearchpeer-review

  93. Published

    Observation of Giant Diffusivity Along Dislocation Cores

    Legros, M., Dehm, G., Arzt, E. & Balk, T. J., 2008, In: Science. 21, p. 1646-1649

    Research output: Contribution to journalArticleResearchpeer-review

  94. Published

    Precipitation processes in a Mg–Zn–Sn alloy studied by TEM and SAXS

    Rashkova, B., Prantl, W., Görgl, R., Keckes, J., Cohen, S., Bamberger, M. & Dehm, G., 2008, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. A494, p. 158-164

    Research output: Contribution to journalArticleResearchpeer-review

  95. Published

    Tensile behaviour of micro-sized copper wires studied using a novel fibre tensile module

    Yang, B., Motz, C., Grosinger, W., Kammrath, W. & Dehm, G., 2008, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 99, p. 716-724

    Research output: Contribution to journalArticleResearchpeer-review

  96. Published

    Testing Thin Films by Microcompression: Benefits and Limits

    Wörgötter, H.-P., Kiener, D., Purswani, J. M., Gall, D. & Dehm, G., 2008, In: Berg- und hüttenmännische Monatshefte : BHM. 153, p. 257-262

    Research output: Contribution to journalArticleResearchpeer-review

  97. Published

    Thermal Stresses and Microstructure of Tungsten Films on Copper

    Kapp, M., Martinschitz, K. J., Keckes, J., Lackner, J. M., Zizak, I. & Dehm, G., 2008, In: Berg- und hüttenmännische Monatshefte : BHM. 517, p. 273-277

    Research output: Contribution to journalArticleResearchpeer-review

  98. Published

    Trends in the Development of New Mg Alloys

    Bamberger, M. & Dehm, G., 2008, In: Annual review of materials research. 38, p. 505-533

    Research output: Contribution to journalArticleResearchpeer-review

  99. Published

    Visualizing the Behavior of Dislocations - Seeing Is Believing

    Robertson, I. M., Ferreira, P. J., Dehm, G., Hull, R. & Stach, E. A., 2008, In: MRS Bulletin. 33, p. 122-131

    Research output: Contribution to journalArticleResearchpeer-review

  100. 2007
  101. Published

    A Comparison of the Electronic Structure of N-K in TiN and VN using EELS and ab-initio Calculations

    Rashkova, B., Kothleitner, G., Sturm, S., Scheu, C., Kutschej, K., Mitterer, C., Lazar, P., Redinger, J., Podloucky, R. & Dehm, G., 2007, Microscopy and Microanalysis. p. 414-415

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  102. Published

    Characterization of mechanical properties on the micron size. Bericht 1

    Kiener, D. & Dehm, G., 2007

    Research output: Book/ReportCommissioned reportTransferpeer-review

  103. Published

    Characterization of mechanical properties on the micron size. Bericht 2

    Kiener, D. & Dehm, G., 2007

    Research output: Book/ReportCommissioned reportTransferpeer-review

  104. Published

    Combination of ab-initio and N-K, Ti-L2,3, V-L2,3 electron energy-loss near edge structure studies for TiN and VN films

    Rashkova, B., Lazar, P., Redinger, J., Podloucky, R., Kothleitner, G., Sturm, S., Kutschej, K., Mitterer, C., Scheu, C. & Dehm, G., 2007, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 98, p. 1060-1065

    Research output: Contribution to journalArticleResearchpeer-review

  105. Published

    Conventional TEM investigation of the FIB damage in copper

    Kiener, D., Jörg, T., Rester, M., Motz, C. & Dehm, G., 2007, In: Microscopy and microanalysis. 13, p. 100-101

    Research output: Contribution to journalArticleResearchpeer-review

  106. Published

    Conventional TEM Investigation of the FIB Damage in Copper

    Kiener, D., Jörg, T., Rester, M., Motz, C. & Dehm, G., 2007, Microscopy Conference, International Forum for Advanced Microscopy. p. 100-101

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  107. Published

    Damage development during cyclic loading - from micro to macro properties. Bericht 1

    Yang, B. & Dehm, G., 2007

    Research output: Book/ReportCommissioned reportTransferpeer-review

  108. Published

    Damage development during cyclic loading - from micro to macro properties. Bericht 2

    Yang, B. & Dehm, G., 2007

    Research output: Book/ReportCommissioned reportTransferpeer-review

  109. Published

    Dynamical growth of Cu–Pt nanowires with a nanonecklace morphology

    Inkson, B. J., Dehm, G. & Pen, Y., 2007, In: Nanotechnology. 18, p. 601-606

    Research output: Contribution to journalArticleResearchpeer-review

  110. Published

    Experimental studies on epitaxially grown TiN and VN films

    Kutschej, K., Rashkova, B., Shen, J., Edwards, D., Mitterer, C. & Dehm, G., 2007, In: Thin solid films. 516, p. 369-373

    Research output: Contribution to journalArticleResearchpeer-review

Previous 1 2 Next