Department Mineral Resources Engineering

Organisational unit: Departments and Institutes

1001 - 1100 out of 3,520Page size: 100

Research output

  1. 2019
  2. Published

    Chemische und mineralogische Charakterisierung sekundärmetallurgischer Schlacken

    Klopf, M., 2019

    Research output: Thesis › Master's Thesis

  3. Published

    Degradation of refractories in non-ferrous metallurgy

    Gregurek, D., 2019

    Research output: Thesis › Habilitation thesis › peer-review

  4. Published

    Development of a connecting rod concept for a power-increased gas engine

    Hopp, S., 2019

    Research output: Thesis › Master's Thesis

  5. Published

    Die Verformungen von Spritzbetonnagelwänden

    Riepler, L. M., 2019

    Research output: Thesis › Master's Thesis

  6. Published

    Drone based deformation monitoring at the Zentrum am Berg tunnel project, Austria. Results and Findings 2017 - 2019.

    Chmelina, K., Gaich, A., Keuschnig, M., Delleske, R., Wenighofer, R. & Galler, R., 2019, Tunnels and Underground Cities: Engineering and Innovation meet Archaeology, Architecture and Art: Proceedings of the WTC 2019, Naples, Italy, 3-9 May, 2019. Vol. 1. p. 46 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  7. Published

    Ein Beitrag zum Verständnis der Wechselwirkung von Gebirge und Versatz

    Moser, A., 2019

    Research output: Thesis › Doctoral Thesis

  8. Published

    Engineering Geology Education in Australasia

    Villeneuve, M. C., 2019, IAEG/AEG Annual Meeting Proceedings, San Francisco, California, 2018—Volume 6. p. 45 50 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Education › peer-review

  9. Published

    Entwicklung eines Anlagenkonzepts zur effizienten Abreicherung von Störstoffen aus dem Rohmehlprozess des Werkes Wietersdorf der w&p Zement GmbH

    Kolp, J., 2019

    Research output: Thesis › Master's Thesis

  10. Published

    Entwicklung eines Hubwerks für Elektroschlacke-Umschmelzanlagen

    Kemper, D., 2019

    Research output: Thesis › Master's Thesis

  11. Published

    Entwicklung eines Verfahrens zur kontrollierten Expansion von feinstdispersen Perlit-Rohsanden

    Weingrill, G., 2019

    Research output: Thesis › Doctoral Thesis

  12. Published

    Entwicklung innovativer Recyclingverfahren für Mineralwolleabfälle – Projekt RecyMin

    Sattler, T. M., Galler, R. & Höllen, D., 2019, In: Berg- und hüttenmännische Monatshefte : BHM. 164.2019, 12, p. 552-556 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Erfassung und Auswertung gebirgsmechanischer Daten aus dem Salzbergwerk Berchtesgaden

    Grossfurtner, E., 2019

    Research output: Thesis › Master's Thesis

  14. Published

    Ermittlung des Trag- und Verformungsverhaltens von Tübbingen des Koralmtunnels Baulos KAT3 und vergleichende Analyse mit Tübbingen vom Baulos KAT2

    Meschik, P., 2019

    Research output: Thesis › Master's Thesis

  15. Published

    Evaluation and Risk Analysis of Open-Pit Mining Operations

    Pekol, A., 2019

    Research output: Thesis › Master's Thesis

  16. Published

    Feinstkornsortierung von Spateisensteinerz des Steirischen Erzberges mittels Starkfeldmagnetscheidung

    Höcher, C., 2019

    Research output: Thesis › Master's Thesis

  17. Published

    High-temperature investigation of mould slag crystallization by single and double hot thermocouple techniques

    Kölbl, N., Marschall, I. & Harmuth, H., 2019, In: Journal of iron and steel research international. 26.2019, 4, p. 345-354 9 p.

    Research output: Contribution to journal › Review article › peer-review

  18. Published

    Holistic analysis of the influence of vibration-optimised blasting patterns on the performance of a hard rock mine

    Hartlieb, P., Seidl, T., Schleicher, R., Tauchner, C. & Schimek, P., 2019, 10th World Conference an explosives and blasting.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. Published

    Holistische Erfassung und Beurteilung von unterschiedlichen Einflussgrößen auf das Sprengergebnis

    Seidl, T., 2019, 21. Kolloquium Bohr und Sprengtechnik 2019: Tagungsband. Langefeld, O. & Tudeshki, H. (eds.). Clausthal-Zellerfeld, p. 95-97

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  20. Published

    Holistische Erfassung und Beurteilung von unterschiedlichen Einflussgrößen auf das Sprengergebnis

    Seidl, T., Hartlieb, P. & Schimek, P., 2019, 50. Internationale Tagung für Sprengtechnik 2019. Linz, 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  21. Published

    Identification and Simulation Study of Mixing Inrush Water Source Based on PHREEQC

    Gao, Y., 2019

    Research output: Thesis › Master's Thesis

  22. Published

    Identification of secondary raw materials in mold powders and their melting behavior

    Marschall, I., Kölbl, N., Harmuth, H. & Atzenhofer, C., 2019, In: Journal of iron and steel research international. 26.2019, 4, p. 403-411 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Innovationen im Bereich der Wirbelstrom-Sortiertechnik

    Doninger, G., Karl, C. & Flachberger, H., 2019, Recycling und Rohstoffe. Vol. 12. p. 544 555 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. Published

    Innovation in the mining industry: a review of recent technological developments and current trends

    Sánchez Llancan, F. H., 2019

    Research output: Thesis › Master's Thesis

  25. Published

    Innovative Deponierung sowie Recycling von Mineralwolleabfällen im Bergversatz, in der Zementindustrie und in der Mineralwolleindustrie – das Projekt RecyMin

    Vollprecht, D., Sattler, T. M., Doschek-Held, K., Galler, R., Schimek, J., Kasper, T., Daul, J. & Pomberger, R., 2019, Berliner Konferenz Mineralische Nebenprodukte und Abfälle: Aschen, Schlacken, Stäube, Baurestmassen. Vol. 6. p. 480 493 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  26. Published

    Investigation of calcium aluminate-based mould slag compositions

    Chen, C., 2019

    Research output: Thesis › Master's Thesis

  27. Published

    Investigation of new slag compositions for the continuous casting of soft steel

    Ye, A., 2019

    Research output: Thesis › Master's Thesis

  28. Published

    Kalkulation der Produkte eines Kieswerkes im Hinblick auf die Differenzierung zwischen Kant- und Rundkorn

    Werhonig, D., 2019

    Research output: Thesis › Master's Thesis

  29. Published

    Keramikfunde: Belege für den Beginn und die Entwicklung der Besiedelung im Bezirk Liezen

    Presslinger, H., Eibner, C., Harmuth, H. & Atzenhofer, C., 2019, In: Da schau her. 2019, 1, p. 16-20 5 p.

    Research output: Contribution to journal › Article › Research

  30. Published

    Konfliktminerale und Lieferkettenmanagement mineralischer Rohstoffe

    Giller, F., 2019

    Research output: Thesis › Master's Thesis

  31. Published

    Kurzzeituntersuchungen an Nassspritzbeton

    Hohenbühel, J., 2019

    Research output: Thesis › Master's Thesis

  32. Published

    Langzeituntersuchungen an jungem Nassspritzbeton - Untersuchung des Dehnungsvermögens bei konstanter Dehnungsrate und des Schwindverhaltens von unbelasteten Proben

    Lamprecht, C., 2019

    Research output: Thesis › Master's Thesis

  33. Published

    Loading and Crushing Assessment of a Blasted Muck Pile

    Schleicher, R., 2019

    Research output: Thesis › Master's Thesis

  34. Published

    Mineral Processing Laboratory Test Work on Two Samples of a Nigerian Gold-/Lead-Ore Operation

    Öfner, W. & Patscheider, S., 2019, 27 p.

    Research output: Book/Report › Commissioned report › Research

  35. Published

    Monitoring von Naturgefahren mittels UAV - Analysen zu Genauigkeit sowie automatischer Passpunktdetektion anhand ausgewählter Fallbeispiele

    Tscharf, A., Wenighofer, R., Stift, L., Mayer, G. & Galler, R., 2019, 20. Internationale Geodätische Woche Obergurgl 2019. p. 209-221 13 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    Naturwissenschaftliche Untersuchungsergebnisse der Klaubproben vom mittelbronzezeitlichen Kupfererzverhüttungsplatz Greithbauer/KG Trieben/OG Trieben

    Presslinger, H., Eibner, C., Harmuth, H. & Atzenhofer, C., 2019, In: Da schau her. 40.2019, 3, p. 18-21 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    NEUES EU-PROJEKT GESTARTET

    Berner, M. & Sifferlinger, N. A., 2019, In: Triple m. p. 18 1 p.

    Research output: Contribution to journal › Article › Research

  38. Published

    Optimierung der Bewetterung in Schaubergwerken

    Nöger, M., 2019

    Research output: Thesis › Master's Thesis

  39. Published

    Physical-Chemical Processing of LD-Slags

    Kamali Moaveni, A., 2019

    Research output: Thesis › Doctoral Thesis

  40. Published

    Potentiale der Kreislaufwirtschaft zur Reduktion des Ausstoßes von Treibhausgasen

    Rieg, L., Meyer, A. & Bertignoll, H., 2019, In: Berg- und hüttenmännische Monatshefte : BHM. 164.2019, 4, p. 169-172 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Probenahme aus Trüben und Untersuchungen von Teilungsprozessen an einem industriellen Apparat

    Habjanic, P., 2019

    Research output: Thesis › Master's Thesis

  42. Published

    Problematik der Tunneldrainagesysteme Österreichs

    Felber, S., 2019

    Research output: Thesis › Master's Thesis

  43. Published

    Prüfung auf Aufbereitbarkeit von Rohkaolinen unter besonderer Berücksichtigung der enthaltenen Begleitminerale

    Spiess, V., 2019

    Research output: Thesis › Master's Thesis

  44. Published

    Recognition and data analysis of mining and earth moving works with a sensor-based system

    Laza Martin, D. I., 2019

    Research output: Thesis › Master's Thesis

  45. Published

    Recovery of Critical Metals from Industrial Waste Waters

    Vollprecht, D., Sedlazeck, K. P., Plessl, K., Öfner, W., Weiß, C., Müller, P., Mischitz, R., Olbrich, T., Schlömann, M., Schopf, S., Frisch, G. & Pomberger, R., 2019, ISWA World Congress 2019. Bilbao, p. 94 - 95

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    Reduction of personnel in exposed areas, safety devices and early steps towards robots in mining

    Berner, M., Sifferlinger, N. A. & Moser, P., 2019, International Future Mining Conference 2019: Conference Proceedings. 1 ed. Vol. 7. p. 29-33 5 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    Resilienz von Straßentunneln - Bedrohungen, Ausfallszenarien und verkehrliche Auswirkungen

    Klampfer, B., 2019

    Research output: Thesis › Master's Thesis

  48. Published

    Reutilization, recycling and reprocessing of mine tailings, considering economic, technical, environmental and social features, a review

    Diaz Martinez, J. C., 2019

    Research output: Thesis › Master's Thesis

  49. Published

    Rock mechanical investigations related to the development of an alternative drilling technology

    Stoxreiter, T., 2019

    Research output: Thesis › Doctoral Thesis

  50. Published

    Safety in Small-Scale Underground Coal Mining in Colombia

    Jaramillo Urrego, L. M., 2019

    Research output: Thesis › Master's Thesis

  51. Published

    Social skills: the cornerstone of the 21st Century mining sector. The International Network of Raw Materials Training Centers project (Intermin)

    Hartlieb, P., Vidovic, J., Correa, V., Jorda, L., Regueiro, M. & Malyuk, B., 2019.

    Research output: Contribution to conference › Abstract

  52. Published

    Solid State Material Driven Turbine

    Prenner, M., 2019.

    Research output: Contribution to conference › Paper › peer-review

  53. Published

    Standortvarianten für eine Murgang-Testanlage im Bereich des Zentrums am Berg am Steirischen Erzberg

    Grafinger, S., 2019

    Research output: Thesis › Master's Thesis

  54. Published

    Study on Coal Spontaneous Combustion in Goaf of Dashe Coal Mine

    Li, S., 2019

    Research output: Thesis › Master's Thesis

  55. Published

    Study on the influence of air leakage in working face on gas flow field in goaf of Y-type ventilation system

    Shi, H., 2019

    Research output: Thesis › Master's Thesis

  56. Published

    Tunnelausbruchmaterial - Abfall oder mineralischer Rohstoff?

    Galler, R., 2019, Mineralische Nebenprodukte und Abfälle 6. Thiel, S., Thomé-Kozmiensky, E., Pretz, T., Senk, D. G. & Wotruba, H. (eds.). Berlin, Vol. 6. p. 562-576 15 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  57. Published

    Tunnel excavation material - waste or valuable mineral resource? - European research results on resource efficient tunnelling

    Galler, R., 2019, Tunnels and Underground Cities: Engineering and Innovation meet Archaeology, Architecture and Art: Proceedings of the WTC2019, Naples, Italy, 3-9 May, 2019. Vol. 1. p. 23 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  58. Published

    Umrüstung einer Pellet-Brenneinrichtung auf elektrische Beheizung und deren Automatisierung

    Gargulak, J., 2019

    Research output: Thesis › Master's Thesis

  59. Published

    Underground energy storage by advanced adiabatic compressed air

    Galler, R., 2019, 14th International Conference Underground Construction Prague 2019 - Book of Abstracts. Prag, p. 76 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  60. Published

    Untersuchung des Stoffübergangs in einer gasgespülten Stahlpfanne durch fluiddynamische Simulationen

    Doletschek, M., 2019

    Research output: Thesis › Doctoral Thesis

  61. Published

    Untersuchung eines Kammer-Festen Abbausystems mit isolierten Abbaukammern

    Kirschner, P., 2019

    Research output: Thesis › Master's Thesis

  62. Published

    Untersuchungen von industriellen Rest- & Kreislaufstoffen aus der Kupferhütte auf Brikettierbarkeit

    Marousek, L., 2019

    Research output: Thesis › Master's Thesis

  63. Published

    Untersuchung verschiedener Flotationsabgänge in Hinblick auf die Verwendung als Rohstoff für alkali-aktivierte Bindemittel

    Simon, O., 2019

    Research output: Thesis › Master's Thesis

  64. Published

    Untersuchung von Flotationsabgängen zur Herstellung eines zementfreien Pumpversatzes

    Sachs, G., 2019

    Research output: Thesis › Master's Thesis

  65. Published

    Volkswirtschaftliche Aspekte der Verwertung von Tunnelausbruchmaterial in Verbindung mit potentiellen Vertragsmodellen

    Strohmer, D., 2019

    Research output: Thesis › Master's Thesis

  66. Published

    Vorwort

    Galler, R., 2019, In: Berg- und hüttenmännische Monatshefte : BHM. 164, 12, p. 491 1 p.

    Research output: Contribution to journal › Article › Research

  67. Published

    Water Withdrawals, CO2 Emissions and Land Use of Bauxite, Copper, Gold and Iron Ore Production: A general Review and Appraisal for the Year 2016

    Bayer, B., 2019

    Research output: Thesis › Master's Thesis

  68. Published

    Zentrum am Berg (ZaB): Durchschlag zwischen Autobahn- und Eisenbahntunnel erfolgreich abgeschlossen

    Galler, R. & Wenighofer, R., 2019, In: Stein & Kies (Mitgliederzeitung - Forum mineralische Rohstoffe). 2019, 158, p. 11 1 p.

    Research output: Contribution to journal › Article › Research

  69. 2018
  70. Published

    Fördertechnik digitalisieren und virtualisieren

    Fimbinger, E. & Mühlenkamp, S., 6 Dec 2018, In: Schüttgut. 2018, 6/2018, Volume 24, p. 22-24 3 p.

    Research output: Contribution to journal › Article › Research › peer-review

  71. Published

    Application of the ÖGG guideline for cost estimates on international megaprojects

    Spiegl, M., Galler, R. & Sander, P., 5 Dec 2018, In: Geomechanics and tunnelling = Geomechanik und Tunnelbau. 11.2018, 6, p. 680-692 13 p.

    Research output: Contribution to journal › Article › Research

  72. Published

    Social licence: power imbalances and levels of consciousness – two case studies

    Hitch, M., Lytle, M. & Tost, M., 5 Dec 2018, In: International Journal of Mining, Reclamation and Environment. 2018, 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  73. Published

    Effect of the phase transformation on fracture behaviour of fused silica refractories

    Dai, Y., Yin, Y., Xu, X., Jin, S., Li, Y. & Harmuth, H., 1 Dec 2018, In: Journal of the European Ceramic Society. 38, 16, p. 5601-5609 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  74. Published

    SOLID STATE MATERIAL DRIVEN TURBINE

    Prenner, M. (Inventor), 30 Nov 2018, IPC No. F03G3/02, F03G3/04, Patent No. PL2788622 (T3)

    Research output: Patent

  75. Published

    Forschungsaktivitäten im Fachbereich Geotechnik und Tunnelbau an der Montanuniversität Leoben

    Galler, R., Gehwolf, P., Stoxreiter, T., Schuller, E. & Pittino, G., 26 Nov 2018, In: Berg- und hüttenmännische Monatshefte : BHM. 163.2018, 12, p. 532-539 8 p.

    Research output: Contribution to journal › Article › Research

  76. Published

    Graduiertenausbildung im Bereich Arbeitssicherheit und Gesundheitsschutz im Bergbau: SafeMine

    Hutwalker, A., Binder, A., Langefeld, O., Galler, R., Johansson, J., Weimer, L., Braun, T. & Lottermoser, B., 21 Nov 2018, In: Berg- und hüttenmännische Monatshefte : BHM. 163.2018, 12, p. 524-527 4 p.

    Research output: Contribution to journal › Article › Research

  77. E-pub ahead of print

    Schneiden von Hartgestein mit Hochdruckstrahlen unter simulierten Bohrlochbedingungen

    Stoxreiter, T., Martin, A., Teza, D. & Galler, R., 15 Nov 2018, (E-pub ahead of print) In: Berg- und hüttenmännische Monatshefte : BHM. 163.2018, 12, p. 504-508 5 p.

    Research output: Contribution to journal › Article › Research

  78. Published

    Analyse des Trag- und Verformungsverhaltens von Stahlfaserbetontübbingen für den maschinellen Tunnelbau

    Gehwolf, P., Wenighofer, R. & Galler, R., 14 Nov 2018, In: Berg- und hüttenmännische Monatshefte : BHM. 163.2018, 12, p. 490-495 6 p.

    Research output: Contribution to journal › Article › Research

  79. Published

    Specific fracture energy and de-agglomeration rate of silicate-bonded foundry sand cores

    Stauder, B., Gruber, D. & Schumacher, P., 11 Oct 2018, In: Production Engineering : research and development. 2018, 12(6), p. 807-816 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  80. Published

    SOLID STATE MATERIAL DRIVEN TURBINE

    Prenner, M. (Inventor), 2 Oct 2018, IPC No. F03G3/02, F03G3/04, Patent No. ES2684352 (T3)

    Research output: Patent

  81. Published

    Vorteile von Feststoffturbinen

    Prenner, M., Grübler, C. & Zeiler, S., Oct 2018, In: Schüttgut. 2018, 5, p. 68-72 5 p.

    Research output: Contribution to journal › Article › Research

  82. Published

    Pléiades Tri-Stereo Data for Glacier Investigations—Examples from the European Alps and the Khumbu Himal

    Rieg, L., Klug, C., Nicholson, L. & Sailer, R., 29 Sept 2018, In: Remote sensing / Molecular Diversity Preservation International (MDPI). 2018, 10

    Research output: Contribution to journal › Article › Research › peer-review

  83. Published

    Using Small-scale Blast Tests and Numerical Modelling to Trace the Origin of Fines Generated in Blasting

    Kukolj, I., Iravani, A. & Ouchterlony, F., 25 Sept 2018, In: Berg- und hüttenmännische Monatshefte : BHM. 163, 10, p. 427 436 p.

    Research output: Contribution to journal › Article › Research › peer-review

  84. Published

    Angular dependence of rock cutting forces due to foliation

    Entacher, M. & Schuller, E., 19 Sept 2018, In: Tunnelling and Underground Space Technology. 71.2018, 215-222, p. 215-222 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  85. Published

    Fördergurtsimulation: Entwicklungen und Anwendung der Methodik zur Simulation von Fördergurten mittels der DEM

    Fimbinger, E., 19 Sept 2018, 23. Fachtagung Schüttgutfördertechnik 2018: Tagungsbericht. Fottner, J. (ed.). München - Garching, p. 17-42 26 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  86. Published

    Passive Staubreduktion beim Schüttgutumschlag - Laborversuche, Feldtests und Simulation mittels DEM-CFD

    Grübler, C., Prenner, M. & Zeiler, S., 19 Sept 2018, p. 171-190. 19 p.

    Research output: Contribution to conference › Paper

  87. Published

    EFFICIENCY OF DENSE MEDIUM CYCLONES IN PROCESSING CARBONACOUS IRON ORES

    Böhm, A., Schilling, F., Kogelbauer, A. & Stadtschnitzer, A., 17 Sept 2018. 9 p.

    Research output: Contribution to conference › Paper › peer-review

  88. Published

    EFFICIENCY OF DENSE MEDIUM CYCLONES IN PROCESSING CARBONACOUS IRON ORES

    Böhm, A. & Schilling, F., 17 Sept 2018.

    Research output: Contribution to conference › Presentation › Research › peer-review

  89. Published

    INNOVATIONS TO ENHANCE THE SEPARABILITY CHARACTERISTICS OF BOF-SLAG

    Kamali Moaveni, A. & Böhm, A., 17 Sept 2018. 9 p.

    Research output: Contribution to conference › Paper › peer-review

  90. Published

    It’s a Hit! Mapping Austrian Research Contributions to the Sustainable Development Goals

    Körfgen, A., Förster, K., Glatz, I., Maier, S., Becsi, B., Meyer, A., Kromp-Kolb, H. & Stötter, J., 14 Sept 2018, In: Sustainability / Molecular Diversity Preservation International (MDPI) . 10, 9, p. 1-13 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  91. Published

    Three stage creep behavior of MgO containing ordinary refractories in tension and compression

    Schachner, S., Jin, S., Gruber, D. & Harmuth, H., 13 Sept 2018, In: Ceramics International : CI.

    Research output: Contribution to journal › Article › Research › peer-review

  92. Published

    Physical Origin of the Fine-Particle Problem in Blasting Fragmentation

    Iravani, A., Åström, J. & Ouchterlony, F., 4 Sept 2018, In: Physical review applied. 10, 3

    Research output: Contribution to journal › Article › Research › peer-review

  93. Published

    Kriegerdenkmal in Rattendorf im Gailtal: 15cm Küstenkanonen L/40

    Sifferlinger, N. A., Sept 2018, In: Österreich maritim : Zeitschrift der Freunde Historischer Schiffe . p. 24-25 2 p.

    Research output: Contribution to journal › Article › Research

  94. Published

    Thermomechanical Modelling of industrial linings

    Samadi, S. & Jin, S., Sept 2018.

    Research output: Contribution to conference › Poster › Research

  95. Published

    Metal Mining’s Environmental Pressures: A Review and Updated Estimates on CO2 Emissions,Water Use, and Land Requirements

    Tost, M., Bayer, B., Hitch, M., Lutter, S., Moser, P. & Feiel, S., 14 Aug 2018, In: Sustainability / Molecular Diversity Preservation International (MDPI) . 2018, 10, 14 p., 2881.

    Research output: Contribution to journal › Article › Research › peer-review

  96. Published

    A Method for Steel Ladle Lining Optimization Applying Thermomechanical Modeling and Taguchi Approaches

    Hou, A., Jin, S., Harmuth, H. & Gruber, D., 9 Aug 2018, In: JOM. 70, 11, p. 2449 2456 p.

    Research output: Contribution to journal › Article › Research › peer-review

  97. Published

    Aufbereitungstechnische Untersuchungen an Wasseraufbereitungs-(WAB-)Schlämmen der voestalpine Stahl GmbH

    Hirsch, G. & Böhm, A., 1 Aug 2018, In: Berg- und hüttenmännische Monatshefte : BHM. 163.2018, 8, p. 322-329 8 p.

    Research output: Contribution to journal › Article › Research

  98. Published

    Thermomechanical modelling of a torpedo car by considering working lining spalling

    Jin, S., Harmuth, H., Gruber, D., Buhr, A., Sinnema, S. & Rebouillat, L., 17 Jul 2018, In: Ironmaking and steelmaking. 0301-9233, 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  99. Published

    REMIX - Smart and Green Mining Regions of EU

    Tscharf, A., Jul 2018, In: Stein & Kies (Mitgliederzeitung - Forum mineralische Rohstoffe). 2018, 155, p. 11

    Research output: Contribution to journal › Article › Research

  100. Published

    Hard rock cutting with high pressure jets in various ambient pressure regimes

    Stoxreiter, T., Martin, A., Teza, D. & Galler, R., 28 Jun 2018, In: International Journal of Rock Mechanics and Mining Sciences. 108.2018, August, p. 179-188 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  101. Published

    Dephosphorization of LD-Slag by Physical Separation Methods

    Kamali Moaveni, A. & Böhm, A., 26 Jun 2018.

    Research output: Contribution to conference › Presentation › Research › peer-review

  102. Accepted/In press

    Prevention of secondary dust emissions in ironmaking plants using dust suppressants: Second Annual Report

    Grübler, C., Sifferlinger, N. A. & Prenner, M., 8 Jun 2018, (Accepted/In press)

    Research output: Book/Report › Commissioned report › Research

Previous 1...7 8 9 10 11 12 13 14 ...36 Next
View graph of relations

Contact information

Franz-Josef-Strasse 18, 8700 Leoben
  • Main phone number: +43 3842 402 6601