Metallic composites processed via extreme deformation: Toward the limits of strength in bulk materials

Pippan, R., Raabe, D., Choi, P. P., Li, Y., Kostka, A., Sauvage, X., Lecouturier, F., Hono, K., Kirchheim, R. & Embury, D., 2010, in: MRS Bulletin. S. 092-991

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Methodology for studying strain inhomogeneities in polycrystalline thin films during in situ thermal loading using coherent x-ray diffraction

Vaxelaire, N., Proudhon, H., Labat, S., Kirchlechner, C., Keckes, J., Jaques, V., Ravy, S., Forest, S. & Thomas, O., 2010, in: New journal of physics. S. 1-12

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Micrometer-Sized Specimen Preparation Based on Ion Slicing Technique

Pippan, R., Wurster, S., Motz, C. & Jenko, M., 2010, in: Advanced engineering materials. S. 61-63

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Micron-sized fracture experiments on amorphous SiOx films and SiOx/SiNx multi-layers

Matoy, K., Schönherr, H., Detzel, T. & Dehm, G., 2010, in: Thin solid films. 518, S. 5796-5801

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Microplasticity phenomena in thermomechanically strained nickel thin films

Taylor, A., Oh, S. H. & Dehm, G., 2010, in: Journal of materials science. 45, S. 3874-3881

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Microstructure and mechanical properties of UFG medium carbon steel processed by HPT at increased temperature

Pippan, R., Zrnik, J., Scheriau, S., Kraus, L. & Fujda, M., 2010, in: Journal of materials science. S. 4822-4826

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Microstructure evolution and strength response of ultrafine grain medium carbon steel processed by high pressure torsion

Pippan, R., Zrnik, J. & Scheriau, S., 2010, in: Journal of physics / Conference series. S. 012131-012131

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Mitigating Focused Ion Beam Damage in Molybdenum Nanopillars by In Situ Annealing

Lowry, M. B., Kiener, D., Le Blanc, B. B., Chisholm, C., Florando, J. N., Morris, J. W. J. & Minor, A. M., 2010, in: Microscopy and microanalysis. 16, S. 1748-1749

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Nanoindentation of wet and dry compact bone: Influence of environment and indenter tip geometry on the indentation modulus

Jäger, I., Guidoni, G. & Swain, M., 2010, in: Philosophical magazine. S. 553-565

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Nano-scale sliding contact deformation behaviour of enamel under wet and dry conditions

Jäger, I., Guidoni, G. & Swain, M., 2010, in: Journal of materials science / Materials in medicine. S. 1195-1203

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Neue Werkstoffe aus plastischer Hochverformung Nanokristalline Metalle

Pippan, R., Hohenwarter, A., Scheriau, S. & Bachmaier, A., 2010, in: Physik in unserer Zeit. S. 23-29

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Numerical analysis on special cracking phenomena of residual compressive inter-layers in ceramic laminates

Chen, C., Bermejo Moratinos, R. & Kolednik, O., 2010, in: Engineering Fracture Mechanics. 77, S. 2567-2576

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Overview of the Grain Size Effects on the Mechanical and Deformation Behaviour of Electrodeposited Nanocrystalline Nickel - from Nanoindentation to High Pressure Torsion

Pippan, R., Yang, B. & Vehoff, H., 2010, in: Materials Science Forum . S. 85-98

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Perylene-Labeled Silica Nanoparticles: Synthesis and Characterization of Three Novel Silica Nanoparticle Species for Live-Cell Imaging

Blechinger, J., Herrmann, R., Kiener, D., Garcia-Garcia, F. J., Scheu, C., Reller, A. & Bräuchle, C., 2010, in: Small. 6, S. 2427-2435

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Quantitative In Situ Mechanical Testing in Electron Microscopes

Motz, C., Legros, M. & Gianola, D. S., 2010, in: Procedia Engineering. S. 925-930

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Rate Independent and Rate Dependent Structural Evolution during Severe Plastic Deformation

Pippan, R., Bachmaier, A. & Hafok, M., 2010, in: Metallurgical and materials transactions. A, Physical metallurgy and materials science . S. 8-13

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Recrystallization and grain growth behavior of SPD deformed 316L stainless steel

Pippan, R., Scheriau, S., Schöberl, T. & Kleber, S., 2010, in: Advanced materials. S. 491-496

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Residual stresses and thermal fatigue in CrN hard coatings characterized by high-temperature synchrotron X-ray diffraction

Kirchlechner, C., Martinschitz, K. J., Daniel, R., Klaus, M., Genzel, C., Mitterer, C. & Keckes, J., 2010, in: Thin solid films. 518, 8, S. 2090-2096

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Review: current international research into cellulose nanofibres and nanocomposites

Keckes, J., Eichhorn, S. J., Dufresne, A., Aranguren, M., Marcovich, N. E., Capadona, J. R., Rowan, S. J., Weder, C., Thielemans, W., Roman, M., Renneckar, S., Gindl, W., Veigel, S., Yano, H., Abe, K., Nogi, M. & Nakagaito, A. N., 2010, in: Journal of materials science. S. 1-33

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Saturation of Fragmentation During Severe Plastic Deformation

Pippan, R., Scheriau, S., Taylor, A., Hafok, M., Hohenwarter, A. & Bachmaier, A., 2010, in: Annual review of materials research. 40, S. 319-343

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Stress, Sheet Resistance, and Microstructure Evolution of Electroplated Cu Films During Self-Annealing

Huang, R., Robl, W., Ceric, H., Detzel, T. & Dehm, G., 2010, in: IEEE transactions on device and materials reliability. 10, 1, S. 47-54

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Structural characterization of a Cu/MgO(001) interface using C S-corrected HRTEM

Cazottes, S., Zhang, Z. L., Daniel, R., Chawla, J. S., Gall, D. & Dehm, G., 2010, in: Thin solid films.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Structural characterization of a Cu/MgO(001) interface using CS-corrected HRTEM

Cazottes, S., Zhang, Z., Daniel, R., Chawla, J. S., Gall, D. & Dehm, G., 2010, in: Thin solid films. 519, S. 1662-1667

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Study of nanometer-scaled lamellar microstructure in a Ti-45Al-7.5Nb alloy-Experiments and modeling

Fischer, F. D., Waitz, T., Scheu, C., Cha, L., Dehm, G., Antretter, T. & Clemens, H., 2010, in: Intermetallics. 18, S. 509-517

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

The ductile to brittle transition of ultrafine-grained Armco iron: an experimental study

Hohenwarter, A., Kammerhofer, C. & Pippan, R., 2010, in: Journal of materials science. 54, S. 4805-4812

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

The origin of stresses in magnetron-sputtered thin films with zone T structures

Daniel, R., Martinschitz, K., Keckes, J. & Mitterer, C., 2010, in: Acta materialia. 58, S. 2621-2633

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

The relationship between structure and mechanical properties of hydrogenated amorphous carbon films

Schöberl, T., Kahn, M., Paskvale, S., Cekada, M., Waldhauser, W., Mitterer, C., Pelinconb, P. & Brandstätter, E., 2010, in: Diamond and related materials. S. 1245-1248

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Thermal behavior of Ni (99.967% and 99.5% purity) deformed to an ultra-high strain by high pressure torsion

Pippan, R., Zhang, H. W., Huang, X. & Hansen, N., 2010, in: Acta materialia. S. 1698-1707

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Thermally-induced formation of hexagonal AlN in AlCrN hard coatings on sapphire: Orientation relationships and residual stresses

Bartosik, M., Daniel, R., Mitterer, C. & Keckes, J., 2010, in: Surface & coatings technology. 205, S. 1320-1323

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

X-ray diffraction analysis of three-dimensional residual stress fields reveals origins of thermal fatigue in uncoated and coated steel

Kirchlechner, C., Martinschitz, K. J., Daniel, R., Mitterer, C., Donges, J., Rothkirch, A., Klaus, M., Genzel, C. & Keckes, J., 2010, in: Scripta materialia. 62, S. 774-777

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

A case study on the effect of thermal residual stresses on the crack-driving force in linear-elastic bimaterials

Rakin, M., Kolednik, O., Medjo, B., Simha, N. K. & Fischer, F. D., 2009, in: International Journal of Mechanical Sciences. S. 531-540

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

A comparative micro-cantilever study of the mechanical behavior of silicon based passivation films

Matoy, K., Schönherr, H., Detzel, T., Schöberl, T., Pippan, R., Motz, C. & Dehm, G., 2009, in: Thin solid films. 518, S. 247-256

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Actual versus apparent within cell wall variability of nanoindentation results from wood cell walls related to cellulose microfibril angle

Konnerth, J., Gierlinger, N., Keckes, J. & Gindl, W., 2009, in: Journal of materials science. 44, S. 4399-4406

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

A novel route for the synthesis of nanocomposite tungsten carbide–cobalt using a biopolymer as a carbon source

Holgate, M. W. R., Schöberl, T. & Hall, S. R., 2009, in: Journal of sol-gel science and technology. 49, S. 145-149

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Can micro-compression testing provide stress-strain data for thin films? A comparative study using Cu, VN, TiN and W coatings

Dehm, G., Wörgötter, H.-P., Cazottes, S., Purswani, J. M., Gall, D., Mitterer, C. & Kiener, D., 2009, in: Thin solid films. 518, S. 1517-1521

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Cellulose in never-dried gel oriented by an AC electric field

Gindl, W., Emsenhuber, G., Maier, G. & Keckes, J., 2009, in: Biomacromolecules. 10, S. 1315-1318

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)