Chair of Metal Forming (560)

Organisational unit: Chair

201 - 300 out of 731Page size: 100

Research output

  1. 2015
  2. Published

    Flowforming research at Montanuniversitaet Leoben

    Buchmayr, B. & Kuss, M., 30 Jun 2015.

    Research output: Contribution to conference › Presentation › Research

  3. Published

    Simulation based optimization of tube K-joints for tower cranes

    Stix, G. & Buchmayr, B., 5 Jun 2015.

    Research output: Contribution to conference › Presentation › Research

  4. Published

    Simulation based optimization of tube K-joints for tower cranes

    Stix, G. & Buchmayr, B., 3 Jun 2015

    Research output: Non-textual form › Digital or Visual Products › Research

  5. Published

    Detektion von Rissen und Bestimmung der Risstiefe mit induktiver Thermografie

    Oswald-Tranta, B., Schmidt, R. & Buchmayr, B., 13 May 2015, Berichtsband DACH-Jahrestagung 2015. Salzburg, Vol. 152.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. Published

    High strength forging steel by direct cooling from the forging heat

    Buchmayr, B. & Eggbauer, G., 5 May 2015.

    Research output: Contribution to conference › Presentation › Research

  7. Published

    High strength forging steel by direct cooling from the forging heat

    Buchmayr, B. & Eggbauer, G., 5 May 2015, Internationale Konferenz "Neuere Entwicklungen in der Massivumformung".

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    Experimental Characterization and Modeling of Residual Stress Grandiens across Straight and Bent Seamless Steel Tubes

    Winter, G., Klarner, J., Staron, P., Buchmayr, B. & Keckes, J., 16 Apr 2015, p. 231 - 236.

    Research output: Contribution to conference › Presentation › Research

  9. Published

    Virtual process design for cold formed components

    Schratter, S., Keckes, J., Winter, G. & Buchmayr, B., 16 Apr 2015, Material Forming ESAFORM 2015. Trans Tech Publications, p. 1279 - 1284 (Key Engineering Materials ; vol. Vol 651-653).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. Published

    Einfluss von Silizium auf bainitische Gefüge und deren Eigenschaften

    Weber, A. & Buchmayr, B., Apr 2015.

    Research output: Contribution to conference › Poster › Research

  11. Published

    Gefügeeigenschaften niedriglegierter Kohlenstoffstähle hinsichtlich Sauergasbeständigkeit

    Weber, A., Stix, G. & Buchmayr, B., 16 Mar 2015.

    Research output: Contribution to conference › Presentation › Research

  12. Published

    Gefügeeigenschaften niedriglegierter Kohlenstoffstähle hinsichtlich Sauergasbeständigkeit

    Weber, A., Stix, G. & Buchmayr, B., 16 Mar 2015, XXXIV. Verformungskundliches Kolloquium 2015 Tagungsband. Buchmayr, B. (ed.). Leoben: Eigenverlag, p. 181 - 192 12 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  13. Published

    Neue Leichtbaumöglichkeiten durch Selektives Laser Schmelzen

    Buchmayr, B. & Walzl, A., 16 Mar 2015, XXXIV. Verformungskundliches Kolloquium 2015 Tagungsband. Buchmayr, B. (ed.). Leoben: Eigenverlag, p. 13-17 5 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  14. Published

    Werkzeugbau mittels Selektiven Laser Schmelzen

    Panzl, G. & Buchmayr, B., 16 Mar 2015, XXXIV. Verformungskundliches Kolloquium 2015 Tagungsband. Buchmayr, B. (ed.). Leoben: Eigenverlag, p. 7-12 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  15. Published

    Nichtlinear kinematisch-isotrop kombiniertes Verfestigungsverhalten in der Simulation von Kaltmassivumformprozessen

    Schratter, S. & Buchmayr, B., 15 Mar 2015, XXXIV. Verformungskundliches Kolloquium 2015 Tagungsband. Buchmayr, B. (ed.). Leoben: Eigenverlag, p. 68 - 73 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  16. Published

    Eine SWOT-Analyse zum Einsatz der Additiven Fertigung für metallische Bauteile

    Buchmayr, B. & Panzl, G., Jan 2015, In: Berg- und hüttenmännische Monatshefte : BHM. 160, 1, p. 15-20 6 p.

    Research output: Contribution to journal › Article › Research

  17. Published

    Additive Manufacturing zur Herstellung von Umformwerkzeugen

    Walzl, A., 2015

    Research output: Thesis › Master's Thesis

  18. Published

    Analytical, numerical and experimental investigations of a ball spinning expansion process

    Kuss, M. & Buchmayr, B., 2015, In: Journal of materials processing technology. 224.2015, October, p. 213-221 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Charakterisierung der Oberflächengüte und Grenzabmessungen beim selektiven Laserschmelzen

    Preuler, L., 2015

    Research output: Thesis › Master's Thesis

  20. Published

    Eigenspannungsoptimiertes Schweißen von Nahtlosrohren

    Stix, G., 2015

    Research output: Thesis › Doctoral Thesis

  21. Published

    Experimental characterization and modelling of triaxial residual stresses in straightened railway rails

    Kaiser, R., Stefenelli, M., Hatzenbichler, T., Antretter, T., Hofmann, M., Keckes, J. & Buchmayr, B., 2015, In: The Journal of Strain Analysis for Engineering Design. 50, 3, p. 190-198 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    High-Strength Bainitic Steels for Forged Products

    Eggbauer, G. & Buchmayr, B., 2015, In: Berg- und hüttenmännische Monatshefte : BHM. 160, 5, p. 209 - 213 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Influence of weld length on behavior of tubular K-joints under load

    Stix, G., Weber, A. & Buchmayr, B., 2015.

    Research output: Contribution to conference › Poster › Research

  24. Published

    Investigation of residual stresses and distortions produced in tubular K-joint

    Stix, G. & Buchmayr, B., 2015

    Research output: Non-textual form › Digital or Visual Products › Research

  25. Published

    Macro- and Microscopic Properties of Gradient Ultra High Strength Thermo-Mechanically Rolled Seamless Steel Tubes

    Winter, G., 2015

    Research output: Thesis › Doctoral Thesis

  26. Published

    MAMC 2014: Vienna's Metal AM Conference reports on progress in a rapidly changing industriy

    Buchmayr, B. & Stampfl, J., 2015, In: Metal AM. 1, 1/2015, p. 53-60 8 p.

    Research output: Contribution to journal › Article › Research

  27. Published

    Mechanical properties of low-alloy-steels with bainitic microstructures and varying carbon content

    Weber, A., Klarner, J., Vogl, T., Schöngrundner, R., Sam, G. & Buchmayr, B., 2015, Proceeding MPPE 2015.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  28. Published

    New lightweight design opportunities and applications for high-strength steels using selective laser melting

    Buchmayr, B., 2015.

    Research output: Contribution to conference › Presentation › Research

  29. Published

    Simulation inkrementeller Rohraufweitung

    Kuss, M. & Buchmayr, B., 2015, 16. RoundTable Simulating Manufacturing.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. Published

    Untersuchung des Einflusses von Walzparametern eines Duo Walzgerüsts auf die mechanischen Eigenschaften ausgewählter Stahlqualitäten

    Ebenbauer, S., 2015

    Research output: Thesis › Diploma Thesis

  31. 2014
  32. Published

    Yield strength prediction in Ni-base alloy 718Plus based on thermo-kinetic precipitation simulation

    Ahmadi, M. R., Povoden-Karadeniz, E., Whitmore, L., Stockinger, M., Falahati, A. & Kozeschnik, E., 1 Jul 2014, In: Materials Science and Engineering A. 608, p. 114-122 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Akademische Schweißtechnische Ausbildung in Österreich

    Enzinger, N., Schlacher, C., Buchmayr, B., Busch, R. & Heim, D., 2014, In: Schweiß- & Prüftechnik. p. 41-46

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Charakterisierung bainitischer Gefügezustände in Schmiedestählen

    Eggbauer, G., Weber, A., Lechleitner, J. & Buchmayr, B., 2014, In: Berg- und hüttenmännische Monatshefte : BHM. p. 194-200

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    CHARAKTERISIERUNG BAINITISCHER GEFÜGEZUSTÄNDE IN SCHMIEDESTÄHLEN

    Eggbauer, G., Weber, A. & Buchmayr, B., 2014, Tagungsband XXXIII. Verformungskundliches Kolloquium. p. 113-117

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    Charakterisierung des Beulverhaltens von Gaspipelines

    Fritz, R., 2014, In: Berg- und hüttenmännische Monatshefte : BHM. p. 302-303

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Charakterisierung des Beulverhaltens von Gaspipelines

    Fritz, R. & Buchmayr, B., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  38. Published

    Charakterisierung unterschiedlicher Schmiermittel zum Schmieden von Aluminiumlegierungen mittels Ringstauchversuch

    Milosevic, I., 2014

    Research output: Thesis › Diploma Thesis

  39. Published

    Eigenspannungsoptimiertes Richten von Eisenbahnschienen

    Kaiser, R., 2014

    Research output: Thesis › Doctoral Thesis

  40. Published

    Ermittlung der Zähigkeitsentwicklung großer Schmiedestücke während der Wärmebehandlung

    Panzl, G., 2014

    Research output: Thesis › Master's Thesis

  41. Published

    Fabrikation und Anwendung von metallischen Schichtverbundwerkstoffen

    Kasberger, R. & Buchmayr, B., 2014, In: Berg- und hüttenmännische Monatshefte : BHM. p. 201-207

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    FEM- Materialmodellvalidierung mittels Eigenspannungen

    Schratter, S. & Buchmayr, B., 2014, Tagungsband XXXIII. Verformungskundliches Kolloquium 2014. p. 45-51

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  43. Published

    Kinetics of the Austenite-to-Ferrite Phase Transformation - Simulations and Experiments

    Gamsjäger, E., Werner, R., Schiller, W. & Buchmayr, B., 2014, In: Steel research international. p. 131-142

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Maschinenbau, Werkstoffkompetenz und Werkstoffanwendung - Tribologische Aufgabenstellungen

    Grün, F., Galler, R., Prenner, M., Supancic, P., Mitterer, C., Ebner, R., Hausberger, A., Schlögl, S., Buchmayr, B., Godor, I., Leitner, M. & Krampl, H., 2014.

    Research output: Contribution to conference › Presentation › Research

  45. Published

    Modeling of two-phase grain structure in the titanium alloy TI-6AL-4V using cellular automata

    Krumphals, A., Poletti, C., Warchomicka, F., Stockinger, M. & Sommitsch, C., 2014, In: International journal for multiscale computational engineering. 12, 1, p. 23-31 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Modellierung des Kaltpilgerns – Betrachtung der Schädigungsentwicklung und ihre Beeinflussung durch die Vorformgeometrie

    Ragger, K., Kaiser, R., Paal, J., Fluch, R. & Buchmayr, B., 2014, In: Berg- und hüttenmännische Monatshefte : BHM. 159, p. 214-219

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Modelling of the ductile damage behaviour of a beta solidifying gamma titanium aluminide alloy during hot-working

    Halici, D., Prodinger, D., Poletti, C., Huber, D., Stockinger, M. & Sommitsch, C., 2014, THERMEC 2013. Mishra, B., Ionescu, M. & Chandra, T. (eds.). Trans Tech Publications, p. 556-561 6 p. (Materials Science Forum; vol. 783-786).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  48. Published

    New Perspectives on Heat Treatment of Large Forgings

    Taschauer, M., Panzl, G., Wieser, V., Seemann, M. & Buchmayr, B., 2014, International Forgemaster Conference 2014. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  49. Published

    Physically based modelling of creep-fatigue in hot work tool steels

    Krumphals, F., 2014, 146 p.

    Research output: Thesis › Doctoral Thesis

  50. Published

    Production and Characterisation of Multilayer Metalic Composites

    Buchmayr, B. & Kasberger, R., 2014, Production an Processing of Clad Materials and Metal Matrix Composites. p. 108-119

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  51. Published

    PROZESSKETTENBETRACHTUNG VON KMU-GESENKSCHMIEDEBETRIEBEN

    Letschnik, A., 2014, Tagungsband XXXIII. Verformungskundliches Kolloquium. p. 31-37

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  52. Published

    Radialschmieden versus Zylinderdrückwalzen

    Kuss, M. & Buchmayr, B., 2014, In: Berg- und hüttenmännische Monatshefte : BHM. 159, p. 208-213

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    Simulation und Optimierung der Prozesskette zur Herstellung profilierter Drähte durch Drahtziehen und Profilwalzen

    Kaiser, R., Hatzenbichler, T. & Buchmayr, B., 2014, In: Berg- und hüttenmännische Monatshefte : BHM. 159, p. 220-225

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    Studies on ductile damage and flow instabilities during hot deformation of a multiphase ã-TiAl alloy

    Halici, D., Zamani, H. A., Prodinger, D., Poletti, C., Huber, D., Stockinger, M. & Sommitsch, C., 2014, Material Forming ESAFORM 2014. Trans Tech Publications, p. 99-105 7 p. (Key Engineering Materials; vol. 611-612).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  55. Published

    Über ein neues Verständnis zum Härten großer Schmiedestücke

    Taschauer, M., Panzl, G., Wieser, V., Seemann, M. & Buchmayr, B., 2014, In: Berg- und hüttenmännische Monatshefte : BHM. p. 186-193

    Research output: Contribution to journal › Article › Research › peer-review

  56. Published

    Ultrasonic degassing of aluminium alloys: basic studies and practical implementations

    Eskin, D., Alba-Baena, N., Pabel, T. & da Siva, M., 2014, In: Materials science and technology. 31, p. 79-84

    Research output: Contribution to journal › Article › Research › peer-review

  57. Published

    Vom Spielzeug zur Steuerung von Umformtechnologien

    Sattler, E. & Buchmayr, B., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  58. Published

    Vom Spielzeug zur Steuerung von Umformtechnologien: Walzdrücken im Kontext von Industrie 4.0

    Sattler, E., 2014

    Research output: Thesis › Master's Thesis

  59. Published

    Walzkraftberechnung für das Kaliberwalzen

    Silbergasser, H., 2014, 67 p.

    Research output: Thesis › Master's Thesis

  60. Published

    XXXIII. Verformungskundliches Kolloquium 2014

    Buchmayr, B. (Editor) & Kuss, M. (Editor), 2014, Leoben, Österreich: Eigenverlag.

    Research output: Book/Report › Anthology › Research

  61. Published

    ZWISCHEN SIMULATION UND REALITÄT – VERGLEICH ZWISCHEN SIMULIERTEN UND GESCHWEISSTEN BAUTEILEN

    Stix, G. & Buchmayr, B., 2014, Tagungsband XXXIII. Verformungskundliches Kolloquium. p. 25-30

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  62. Published

    ZWISCHEN SIMULATION UND REALITÄT – VERGLEICH ZWISCHEN SIMULIERTEN UND GESCHWEISSTEN BAUTEILEN

    Stix, G. & Buchmayr, B., 2014.

    Research output: Contribution to conference › Presentation › Research

  63. 2013
  64. Published

    3D Finite Element Simulation of Pilger Mill Rolling

    Ragger, K., Kaiser, R., Hatzenbichler, T., Buchmayr, B., Paal, J. & Fluch, R., 2013,

    9th International Rolling Conferece & 6th European Rolling Conference,

    .     p. na-na

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  65. Published

    Bestimmung der Einflussparameter der Prozesskette Reinigen-Vergüten-Nitrieren auf das Nitrierergebnis des Werkstoffes X40CrMoV5-1

    Jahic, E., 2013

    Research output: Thesis › Diploma Thesis

  66. Published

    Charakterisierung bainitischer Gefügezustände für Gesenkschmiedeteile

    Eggbauer, G., 2013

    Research output: Thesis › Diploma Thesis

  67. Published

    Experimentelle und rechnerische Charakterisierung des Beulverhalten von Pipeline-Rohren

    Fritz, R., 2013, 107 p.

    Research output: Thesis › Diploma Thesis

  68. Published

    Herausforderungen bei der Simulation von inkrementellen Umformverfahren zur Herstellung von Leichtbauprodukten

    Kuss, M., Harrer, O.-K. & Buchmayr, B., 2013, Herausforderungen der Simulation. p. 99-106

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  69. Published

    Hybrid Joints - Lightweight Automotive Engineering by the Use of Multi-Material Design

    Schleicher, T., 2013

    Research output: Thesis › Diploma Thesis

  70. Published

    Investigation and comparison of heat transfers analysis used in commercial FEM for metal forming

    Flitta, I., Hatzenbichler, T., Pschera, R., Wallner, S. & Buchmayr, B., 2013,

    15th International Conference on advances in Materials&Processing Technologies

    .     p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  71. Published

    Modeling of dual-phase grain structure in Ti-6Al-4V during isothermal and non-isothermal heat treatment using cellular automata

    Krumphals, A., Poletti, C., Warchomicka, F., Stockinger, M. & Sommitsch, C., 2013, Recrystallization and Grain Growth V. Trans Tech Publications, p. 353-356 4 p. (Materials Science Forum; vol. 753).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  72. Published

    Nem csak környezetvédelmi előnyök - alumíniumöntvények tulajdonságainak javítása intec-magok használatával

    Pabel, T., Kneißl, C., Brotzki, J. & Müller, J., 2013, In: Bányászati és kohászati lapok = Zurnal gornogo dela i metallurgija = Zeitschrift für Berg- und Hüttenwesen / Kohászat = Metallurgija = Hüttenwesen. 3, 9-10, p. 14-19

    Research output: Contribution to journal › Article › Research › peer-review

  73. Published

    Optimierung von Prozessketten für rohrförmige Endprodukte

    Buchmayr, B. & Klarner, J., 2013, Umformtechnik Stahl und NE-Metalle, Vom Werkstoff zum Produkt. p. 75-84

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  74. Published

    Schweißtechnik im Wandel und die Rolle der ÖGS als Wissensplattform

    Buchmayr, B., 2013, In: Schweiß- & Prüftechnik. p. 191-194

    Research output: Contribution to journal › Article › Research › peer-review

  75. Published

    Simulation des Presshärtens unter Berücksichtigung der Gefügeumwandlung

    Craighero, P., 2013, 120 p.

    Research output: Thesis › Diploma Thesis

  76. Published

    Systematische Prozessbetrachtung von Flow Forming

    Kuss, M. & Buchmayr, B., 2013, Systematische Prozessbetrachtung von Flow Forming. p. 131-136

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  77. Published

    Verformungsinduzierte Phasenumwandlung einzelner Austenitkörner

    Kasberger, R., 2013, XXXII Verformungskundliches Kolloquium. p. 143-149

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  78. Published

    Vergleichende Untersuchungen über unterschiedliche Reparaturmethoden von Schmiedegesenken

    Mazlum, E. Z., 2013

    Research output: Thesis › Diploma Thesis

  79. Published

    XXXII. Verformungskundliches Kolloquium 2013

    Buchmayr, B. (Editor) & Harrer, O.-K. (Editor), 2013, Leoben, Österreich: Eigenverlag.

    Research output: Book/Report › Anthology › Research

  80. 2012
  81. Published

    Modeling of grain growth in one and two phase materials by 2D cellular automata

    Sommitsch, C., Krumphals, A., Candic, M., Tian, B. & Stockinger, M., Sept 2012, In: Journal of computational and theoretical nanoscience. 9, 9, p. 1515-1524 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  82. Published

    Microstructure control in processing nickel, titanium and other special alloys

    Sommitsch, C., Radis, R., Krumphals, A., Stockinger, M. & Huber, D., Jul 2012, Microstructure Evolution in Metal Forming Processes. Elsevier Ltd, p. 337-383 47 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  83. Published

    3D Finite Element Simulation of Cold Pilgering over the Whole Productive Time

    Strickner, G., Ragger, K., Hatzenbichler, T. & Buchmayr, B., 2012, Proceedings of the14th International Conference on Metal Forming 2012. p. 71-74

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  84. Published

    5.Analyse des Axial-Radial-Umformens mittels Finite-Elemente-Methode

    Kuss, M., Wallner, S., Harrer, O.-K. & Buchmayr, B., 2012, In: Berg- und hüttenmännische Monatshefte : BHM. p. 181-186

    Research output: Contribution to journal › Article › Research › peer-review

  85. Published

    A finite element model for carburisation of surface densified PM components

    Eck, S., Ishmurzin, A., Wlanis, T., Ebner, R., Hatzenbichler, T. & Planitzer, F., 2012, In: International journal of computational materials science and surface engineering. 5, 1, p. 16-30

    Research output: Contribution to journal › Article › Research › peer-review

  86. Published

    A new Concept to Design Drawing Tools with Respect to Central Demage

    Kaiser, R., Hatzenbichler, T. & Buchmayr, B., 2012, Proceedings of the14th International Conference on Metal Forming 2012. p. 1387-1390

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  87. Published

    Ausgewählte fertigungstechnische Methoden zur Verbesserung des Stabilitätsverhaltens von Rechteckplatten

    Figala, G., 2012, 161 p.

    Research output: Thesis › Doctoral Thesis

  88. Published

    Bandplanheit von kaltgewalzten Stahlbändern

    Hofinger, A., 2012, 97 p.

    Research output: Thesis › Master's Thesis

  89. Published

    Characterisierung des Umform- und Umwandlungsverhaltens des Dualphasenstrahles 10MnSi7 für die Massivumformung

    Buchmayr, B. & Schiller, W., 2012, MEFORM 2012. p. 1-9

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  90. Published

    Charakterisierung der mechanischen Eigenschaften von Wellrohren

    Wunsch, L., 2012

    Research output: Thesis › Diploma Thesis

  91. Published

    Computertomographie als zerstörungsfreies Prüfverfahren für Gussteile

    Pabel, T., Rosc, J., Habe, D., Geier, G. F. & Fritz, L., 2012, In: Schweiß- & Prüftechnik. p. 25-29

    Research output: Contribution to journal › Article › Research › peer-review

  92. Published

    Deviation of the results obtained from different commercial finite element solvers due to friction formulation

    Hatzenbichler, T., Harrer, O.-K., Wallner, S., Planitzer, F., Kuss, M., Pschera, R. & Buchmayr, B., 2012, In: Tribology International. 49, p. 75-79

    Research output: Contribution to journal › Article › Research › peer-review

  93. Published

    Einfluss des Faserverlaufs auf die mechanischen Eigenschaften von Schmiedebauteilen

    Mehl, L., 2012

    Research output: Thesis › Diploma Thesis

  94. Published

    Entwicklung eines Simulationsmodells zum Pilgerschrittwalzen

    Strickner, G., 2012

    Research output: Thesis › Diploma Thesis

  95. Published

    Evolution of beta grain size during beta phase processing of Ti-6A1-4V

    Krumphals, A., Stockinger, M., Warchomicka, F. & Sommitsch, C., 2012, Ti 2011 - Proceedings of the 12th World Conference on Titanium. p. 493-496 4 p. (Ti 2011 - Proceedings of the 12th World Conference on Titanium; vol. 1).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  96. Published

    FEM-Analyse des Axial-Radial-Umformens als Verfahrenserweiterung des Radialschmiedens

    Kuss, M., Wallner, S., Harrer, O.-K. & Buchmayr, B., 2012, XXXI. Verformungskundliches Kolloquium. p. 29-33

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  97. Published

    FEM-Analyse des Axial-Radial-Umformens als Verfahrenserweiterung des Radialschmiedens

    Kuss, M., Wallner, S. & Buchmayr, B., 2012, Simulation in der Umformtechnik. p. 228-245

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  98. Published

    FEM-Analyse des Axial-Radial-Umformens als Verfahrenserweiterung des Radialschmiedens

    Kuss, M., 2012

    Research output: Thesis › Diploma Thesis

  99. Published

    Grundlegende Untersuchungen zur Herstellung geschweißter Schmiedevorformen

    Lietz, M., 2012, 125 p.

    Research output: Thesis › Diploma Thesis

  100. Published

    Induktionsbiegen von Rohrmänteln

    Silvayeh, Z., 2012

    Research output: Thesis › Diploma Thesis

  101. Published

    Influence of temperature and strain rate on dynamic softening processes in Allvac® 718Plus™

    Mitsche, S., Sommitsch, C., Huber, D., Stockinger, M. & Poelt, P., 2012, THERMEC 2011. Trans Tech Publications, p. 2440-2445 6 p. (Materials Science Forum; vol. 706-709).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  102. Published

    Lightweight design by radial forged gear box components

    Hofer, F., Kuss, M., Wallner, S., Buchmayr, B. & Harrer, O.-K., 2012, Getriebe in Fahrzeugen. p. 309-319

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  103. Published

    Maßnahmen zur Reparatur und Lebensdauererhöhung von Schmiedewerkzeugen

    Yilkiran, T., Behrens, B.-A. & Buchmayr, B., 2012, In: Schmiede-Journal. 2012, März, p. 52-57

    Research output: Contribution to journal › Article › Research › peer-review

  104. Published

    Modifizierung nder eutektischen Mg2Si-Phase von AlMgSi-Gusslegierungen

    Pabel, T., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

Previous 1 2 3 4 5 6 7 8 Next
View graph of relations

Contact information

Franz-Josef Straße 18, 8700 Leoben