Chair of Metal Forming (560)

Organisational unit: Chair

51 - 100 out of 731Page size: 50

Research output

  1. 2022
  2. E-pub ahead of print

    Influence of delta ferrite on the impact toughness of a PH 13-8 Mo maraging steel

    Rosenauer, A., Brandl, D., Ressel, G., Lukas, S., Monschein, S., Stockinger, M. & Schnitzer, R., 19 Sept 2022, (E-pub ahead of print) In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 856.2022, 20 October, 11 p., 144024.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Determination of prior austenite grain-and martensitic substructure size from metallographic etchings using a multi-step image processing algorithm

    Hönigmann, T., Brandl, D. C., Stockinger, M., Gruber, C., Frois, F. & Ressel, G., 20 Jul 2022, In: Praktische Metallographie/Practical Metallography. 59.2022, 7, p. 386-404 19 p.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    In-situ investigation of grain size evolution of Alloy 718 using Laser-Ultrasonics

    Hartl, K., Kerschbaummayr, C. & Stockinger, M., 12 Mar 2022, p. 31-38. 8 p.

    Research output: Contribution to conference › Paper › peer-review

  5. Published

    Quality 5.0 - A data-driven path towards zero waste

    Sorger, M., 12 Mar 2022, XL. Verformungskundliches Kolloquium.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. Published

    Evidence-based Redesign of Engineering Education Lectures: Theoretical Framework and Preliminary Empirical Evidence

    Ralph, B., Woschank, M., Pacher, C. & Murphy, M., 23 Jan 2022, In: European journal of engineering education : EJEE. 47.2002, 4, p. 636–663 28 p.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Auswirkung von Plattformtemperatur und unterschiedlichen Wärmebehandlungskonzepten auf Gefüge und mechanische Eigenschaften von L-PBF AlSi10Mg

    Großberger, K., 2022

    Research output: Thesis › Master's Thesis

  8. Published

    Development of a predictive simulation setup for the influence of thermo-mechanical processing on the niobium carbide distribution in PH15-5 steel

    Damm, N., 2022

    Research output: Thesis › Master's Thesis

  9. Published

    Digital Shadow for condition monitoring of a tool machine frame with specific load conditions

    Skall, B. E., 2022

    Research output: Thesis › Master's Thesis

  10. Published

    Entwicklung einer Methodik für die Abbildung von Beschichtungsmitteln in FEM-Warmumformsimulationen

    Klaushofer, M., 2022

    Research output: Thesis › Master's Thesis

  11. Published

    Implementation of automated, interconnective Finite Element Analyses for the development of Cyber Physical Production Systems

    Waiguny, C., 2022

    Research output: Thesis › Master's Thesis

  12. Published

    Inverse Finite-Elemente Analyse zur Auswertung des Heißtorsionsversuches

    Wenda, A., 2022

    Research output: Thesis › Master's Thesis

  13. Published

    Konzipierung und Auslegung einer Druckautoklavenanlage für Hochdruckanwendungen in der additiven Fertigung

    Roth, D., 2022

    Research output: Thesis › Master's Thesis

  14. Published

    Konzipierung und Entwicklung eines standardisierten Tiefkühlbehälters für Logistikanwendungen

    Höfer, T., 2022

    Research output: Thesis › Master's Thesis

  15. Published

    Leichtbau von Fräsvorrichtungen

    Sauseng, J., 2022

    Research output: Thesis › Master's Thesis

  16. Published

    On the manufacturability of a hybrid cast and wire and arc additive manufactured aluminium component for the automotive industry

    Reinalter, G., 2022

    Research output: Thesis › Master's Thesis

  17. Published

    Schrägfehlerausbildung bei der Herstellung von nahtlosen Stahlrohren

    Mayer, M., 2022

    Research output: Thesis › Master's Thesis

  18. Published

    Wirtschaftlicher Vergleich zwischen additiv und konventionell hergestellten Bauteilen aus Inconel718: Optimierung und Analyse

    Köll, A., 2022

    Research output: Thesis › Master's Thesis

  19. 2021
  20. Published

    MUL 4.0: Systematic Digitalization of a Value Chain from Raw Material to Recycling

    Ralph, B. J., Woschank, M., Miklautsch, P., Kaiblinger, A., Sorger, M., Pacher, C., Zsifkovits, H. & Stockinger, M., 3 Nov 2021, In: Procedia Manufacturing. 55, p. 335-342

    Research output: Contribution to journal › Article › Research › peer-review

  21. E-pub ahead of print

    Transformation of a rolling mill aggregate to a cyber physical production system: from sensor retrofitting to machine learning

    Ralph, B. J., Sorger, M., Hartl, K., Schwarz-Gsaxner, A., Messner, F. & Stockinger, M., 24 Oct 2021, (E-pub ahead of print) In: Journal of Intelligent Manufacturing. 33.2022, 2, p. 493-518 27 p.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Big Data in the Metal Processing Value Chain: A Systematic Digitalization Approach under Special Consideration of Standardization and SMEs

    Sorger, M., Ralph, B. J., Hartl, K., Woschank, M. & Stockinger, M., Oct 2021, In: Applied Sciences : open access journal. 11, 19, p. 9021 22 p.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Validated multi-physical finite element modelling of the spot welding process of the advanced high strength steel dp1200hd

    Prabitz, K., Pichler, M., Antretter, T., Schubert, H., Hilpert, B., Gruber, M., Sierlinger, R. & Ecker, W., 18 Sept 2021, In: Materials. 14.2021, 18, 19 p., 5411.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Dry friction under pressure variation of PACVD TiN surfaces on selected automotive sheet metals for the application in unlubricated metal forming

    Frohn-Sörensen, P., Cislo, C., Paschke, H., Stockinger, M. & Engel, B., 15 Jul 2021, In: Wear. 476.2021, July, 9 p., 203750.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    MUL 4.0 – Digitalisierung der Wertschöpfungskette vom Rohmaterial bis hin zum Recycling

    Woschank, M., Ralph, B. J., Kaiblinger, A., Miklautsch, P., Pacher, C., Sorger, M., Zsifkovits, H., Stockinger, M., Pogatscher, S., Antretter, T. & Antrekowitsch, H., 2 Jun 2021, In: Berg- und hüttenmännische Monatshefte : BHM. 166, 6, p. 309-313

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    A new development of four-point method to measure the electrical resistivity in situ during plastic deformation

    Saberi, S., Stockinger, M., Stoeckl, C., Buchmayr, B., Weiss, H., Afsharnia, R. & Hartl, K., 11 May 2021, In: Measurement. 180.2021, August, 109547.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Planning and implementation of a digital shadow for the friction factor quantification of the ECAP process using grey box modeling approach and finite element analysis

    Schwarz, A., Ralph, B. & Stockinger, M., 4 May 2021, In: Procedia CIRP. 99.2021, p. 237-241 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Implementation of a Six-Layer Smart Factory Architecture with Special Focus on Transdisciplinary Engineering Education

    Ralph, B. J., Sorger, M., Schödinger, B., Schmölzer, H.-J., Hartl, K. & Stockinger, M., 22 Apr 2021, In: Sensors. 21.2021, 9, 24 p., 2944.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Machine Learning Driven Prediction of Residual Stresses for the Shot Peening Process Using a Finite Element Based Grey-Box Model Approach

    Ralph, B. J., Hartl, K., Sorger, M., Schwarz-Gsaxner, A. & Stockinger, M., 21 Apr 2021, In: Journal of Manufacturing and Materials Processing. 5.2021, 2, p. 39-59 21 p., 5020039.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Theoretical and experimental investigations of mechanical vibrations of hot hammer forging

    Saberi, S., Fischer, J., Stockinger, M., Tikal, R. & Afsharnia, R., 20 Apr 2021, In: International Journal of Advanced Manufacturing Technology. 114.2021, 9-10, p. 3037-3045 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Simulation of dynamic and meta-dynamic recrystallization behavior of forged Alloy 718 parts using a multi-class grain size model

    Gruber, C., Raninger, P., Stanojevic, A., Godor, F., Rath, M., Kozeschnik, E. & Stockinger, M., Jan 2021, In: Materials. 14, 1, p. 1-15 15 p., 111.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Bestimmung systemrelevanter Parameter für die Auslegung von Warmumformprozessen im Temperaturbereich von 350 - 500°C

    Kölbl, L., 2021

    Research output: Thesis › Master's Thesis

  33. Published

    Design of hydrogen resistant high-strength steel fasteners

    Pötz, M., 2021

    Research output: Thesis › Master's Thesis

  34. Published

    Development of a multi-layer project management framework for SME's using PHP and SQL

    Schmölzer, H.-J., 2021

    Research output: Thesis › Master's Thesis

  35. Published

    Digitalization and Digital Transformation in the Austrian Metal Forming Industry

    Ralph, B., 2021

    Research output: Thesis › Doctoral Thesis

  36. Published

    Entwicklung einer effizienten Simulationsmethode für einen Gewindewalzprozess

    Weindl, C., 2021

    Research output: Thesis › Master's Thesis

  37. Published

    Entwicklung einer Methode zur Einbringung von Druckeigenspannungen in Schienenfüße

    Keinprecht, M., 2021

    Research output: Thesis › Master's Thesis

  38. Published

    Fabrication of 3D metal-ceramic (Al-AlN) architectures using laser-powder bed fusion process

    Wallis, C., Buchmayr, B., Bermejo, R. & Supancic, P., 2021, In: Additive Manufacturing. 38.2021, February, 14 p., 101799.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Implementierung eines Low-Cost Human-Machine Interfaces in ein Cyber Physical Production System

    Messner, F., 2021

    Research output: Thesis › Master's Thesis

  40. Published

    Investigation of the deformation and fracture behaviour of two steel grades under cold heading conditions

    Stögner, P., 2021

    Research output: Thesis › Doctoral Thesis

  41. Published

    Mikrostrukturentwicklung der Nickel-Basis Superlegierung RENE65

    Candic, K., 2021

    Research output: Thesis › Master's Thesis

  42. Published

    Multi-class grain size model for forged alloy 718 aircraft parts

    Gruber, C., Raninger, P., Stockinger, M. & Bucher, C., 2021, THERMEC 2021 - International Conference on Processing and Manufacturing of Advanced Materials Processing, Fabrication, Properties, Applications. Ionescu, M., Sommitsch, C., Poletti, C., Kozeschnik, E. & Chandra, T. (eds.). Trans Tech Publications, p. 499-508 10 p. (Materials Science Forum; vol. 1016 MSF).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  43. Published

    Rapid Tooling von Schmiedegesenken mittels Blechpakete

    Grill, B. M., 2021

    Research output: Thesis › Master's Thesis

  44. 2020
  45. Published

    Entwicklung einer ECAP Anlage mit integriertem digitalen Schatten

    Schwarz-Gsaxner, A. & Stockinger, M., 9 Dec 2020, Tagungsband 11. Ranshofener Leichtmetalltage: Leichtmetalle, Werkstoff- und Prozesstechnologien im Kontext von Dekarbonisierung und Digitalisierung. p. 80-87 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    Conceptualization of the Lecture ‘Digitalization and Digital Transformation in Metal Forming’ based on Implications from Contemporary Teaching and Learning Theories

    Ralph, B. J., Pacher, C. & Woschank, M., 8 Dec 2020, Proceedings of the International Conference on Industrial Engineering and Operations (IEOM) Management, October 20-22, 2020, Harare, Zimbabwe. p. 703-712

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    Warm-forming of pre-aged Al-Zn-Mg-Cu alloy sheet

    Österreicher, J. A., Tunes, M. A., Grabner, F., Arnoldt, A., Kremmer, T., Pogatscher, S. & Schlögl, C. M., Aug 2020, In: Materials and Design. 193, p. 108837 1 p., 108837.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    An Implementation Approach for an Academic Learning Factory for the Metal Forming Industry with Special Focus on Digital Twins and Finite Element Analysis

    Ralph, B., Schwarz, A. & Stockinger, M., 29 Apr 2020, In: Procedia Manufacturing. 45, 45, p. 253-258 6 p.

    Research output: Contribution to journal › Conference article › peer-review

  49. Published

    Conception, design and finite element analysis of an equal channel angular pressing machine

    Schwarz, A. & Stockinger, M., 21 Mar 2020, Tagungsband XXXIX. Verformungskundliches Kolloquium. Montanuniversität Leoben, Lehrstuhl für Umformtechnik, p. 47-52 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  50. Published

    Digitalization and digital transformation in metal forming: key technologies, challenges and current developments of industry 4.0 applications

    Ralph, B. J. & Stockinger, M., 21 Mar 2020, XXXIX. Verformungskundliches Kolloquium: Zauchensee 2020. Montanuniversität Leoben, Lehrstuhl für Umformtechnik, p. 13-23 11 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  51. Published

    Solid state recycling of aluminum alloy chips via pulsed electric current sintering

    Cislo, C. N., Kronthaler, B., Buchmayr, B. & Weiß, C., 10 Mar 2020, In: Journal of Manufacturing and Materials Processing. 4.2020, 1, 19 p., 4010023.

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Analyse des Einflusses des Ausgangsmaterials auf das erzielbare Mikrogefüge bei Alloy 718 Blechherstellung

    Mirtl, D., 2020

    Research output: Thesis › Master's Thesis

  53. Published

    Bestimmung von Einflussgrößen auf die Maßhaltigkeit beim Rundwalzen von Stäben in Versuch und Simulation

    Fasching, C., 2020

    Research output: Thesis › Master's Thesis

Previous 1 2 3 4 5 6 7 8 ...15 Next
View graph of relations

Contact information

Franz-Josef Straße 18, 8700 Leoben