Chair of Mechanics (400)
Organisational unit: Chair
Research output
- 2025
- Published
Damping of vibrations of a rod by dissipation due to diffusion
Svoboda, J., Hackl, K. & Fischer, F.-D., 1 Mar 2025, In: Scripta Materialia. 257.2025, 1 March, 5 p., 116461.Research output: Contribution to journal › Article › Research › peer-review
- Published
On the effect of isotropic and anisotropic dissipative response functions with associated and nonassociated flow on the inelastic behavior of polymeric composites
Gaddikere Nagaraja, S., Antretter, T. & Schuecker, C., 16 Feb 2025, In: Mechanics of advanced materials and structures. ??? Stand: 28. Februar 2025, ??? Stand: 28. Februar 2025, 17 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Characterization of High-Speed Steels—Experimental Data and Their Evaluation Supported by Machine Learning Algorithms
Wießner, M. & Gamsjäger, E., 12 Feb 2025, In: Metals : open access journal . 15.2025, 2, 28 p., 194.Research output: Contribution to journal › Article › Research › peer-review
- Published
Finite Element Investigation of the Dynamic Behavior of High-Speed Turnouts with Swing-Nose Crossing
Sistaninia, M., Daves, W., Bucher, C., Antretter, T. & Gänser, H. P., 2025, Advances in Dynamics of Vehicles on Roads and Tracks III - Proceedings of the 28th Symposium of the International Association of Vehicle System Dynamics, IAVSD 2023, Rail Vehicles. Huang, W. & Ahmadian, M. (eds.). p. 1047-1058 12 p. (Lecture Notes in Mechanical Engineering).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
On the Road Towards Understanding Squats - Metallographic Investigations of Rails
Gschwandl, T., Spalek, A., Antretter, T. & Daves, W., 2025, Advances in Dynamics of Vehicles on Roads and Tracks III - Proceedings of the 28th Symposium of the International Association of Vehicle System Dynamics, IAVSD 2023, Rail Vehicles. Huang, W. & Ahmadian, M. (eds.). p. 314-323 10 p. (Lecture Notes in Mechanical Engineering).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- 2024
- Published
Revisiting the Extension of SGTE Heat Capacity Data to Zero Kelvin: Combining Classical Fit Polynomials with Debye–Einstein Functions
Gamsjäger, E. & Wießner, M., 4 Nov 2024, In: Journal of phase equilibria and diffusion. 45.2024, 6, p. 1194-1205 12 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
A variational framework for Cahn–Hilliard-type diffusion coupled with Allen–Cahn-type multi-phase transformations in elastic and dissipative solids
Gaddikere Nagaraja, S. & Antretter, T., 24 Sept 2024, In: International journal of plasticity. 182.2024, November, 20 p., 104131.Research output: Contribution to journal › Article › Research › peer-review
- Published
Dissolution of Oxide Particles in Multi-component Slags Governed by Diffusive and Convective Fluxes
Ogris, D. M., Michelic, S. K. & Gamsjäger, E., 8 Jul 2024, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 55.2024, 5, p. 3451-3463 13 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Materials science-based guidelines to develop robust hard thin film materials
Mayrhofer, P. H., Clemens, H. & Fischer, F.-D., 3 Jun 2024, In: Progress in materials science. 146.2024, December, 57 p., 101323.Research output: Contribution to journal › Review article › peer-review
- Published
Extended Regression Analysis for Debye–Einstein Models Describing Low Temperature Heat Capacity Data of Solids
Gamsjäger, E. & Wiessner, M., 26 May 2024, In: Entropy. 26.2024, 6, 16 p., 452.Research output: Contribution to journal › Article › Research › peer-review
- Published
Modeling solute drag during austenite–ferrite transformation with ab initio binding energies
Bloder, B. F., Scheiber, D., Raninger, P., Ecker, W. & Antretter, T., 17 May 2024, In: Materialia. 36.2024, August, 9 p., 102128.Research output: Contribution to journal › Article › Research › peer-review
- E-pub ahead of print
Investigation of probable squat growth from initial surface cracks in rails using a three-dimensional rollover simulation
Gschwandl, T. J., Antretter, T., Künstner, D., Scheriau, S. & Daves, W., 29 Apr 2024, (E-pub ahead of print) In: Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit. 238.2024, 4, p. 406-413 8 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Multi-physical simulation of an inductive heat treatment process on 50CrMo4 steel rods and validation by HEXRD cross-sectional measurements
Mevec, D. G., Raninger, P., Jászfi, V., Prevedel, P. & Antretter, T., 15 Apr 2024, In: Materialia. 34.2024, May, 102094.Research output: Contribution to journal › Article › Research › peer-review
- Published
On the coupling of Hamilton's principle and thermodynamic extremal principles
Hackl, K., Svoboda, J. & Fischer, F.-D., 30 Mar 2024, In: Journal of the mechanics and physics of solids. 187.2024, June, 8 p., 105633.Research output: Contribution to journal › Article › Research › peer-review
- Published
A note concerning some aspects for application of a thermodynamic extremal principle (TEP) for continua
Fischer, F.-D., Zickler, G., Hackl, K. & Svoboda, J., 9 Mar 2024, In: Acta mechanica. 235.2024, 5, p. 3309-3312 4 p.Research output: Contribution to journal › Comment/debate › peer-review
- Published
Multiscale in-situ observations of the micro- and nanostructure of a PH 13-8 Mo maraging steel during austenitization
Rosenauer, A., Brandl, D., Ressel, G., Hönigmann, T., Stadler, M., Turk, C., Gammer, C., Wiessner, M., Gamsjäger, E., Stockinger, M. & Schnitzer, R., Feb 2024, In: Materials characterization. 208.2024, February, 13 p., 113554.Research output: Contribution to journal › Article › Research › peer-review
- E-pub ahead of print
Numerical and experimental assessment of liquid metal embrittlement in externally loaded spot welds
Prabitz, K. M., Antretter, T., Rethmeier, M., El-Sari, B., Schubert, H., Hilpert, B., Gruber, M., Sierlinger, R. & Ecker, W., 30 Jan 2024, (E-pub ahead of print) In: Welding in the world. 68.2024, 10, p. 2713-2722 10 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
A Chemo-Mechanically Coupled Model for the Prediction of Phase Segregation and Pore Formation in Microelectronic Solders
Antretter, T., 7 Jan 2024.Research output: Contribution to conference › Presentation › Research › peer-review
- Published
A comprehensive methodology for criticality assessment of microvias in printed circuit board assemblies
Kamble, V. G., Patel, D. R., Schipfer, C., Thalhamer, A., Zuendel, J., Krivec, T., Antretter, T. & Fuchs, P. F., 2024, 2024 25th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2024. Institute of Electrical and Electronics Engineers, (2024 25th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2024).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Creating a Multiphase Production Model Tailored to Deviated Oil-Producing Wells for Integration as Input into a Machine Learning Model for ESP Survival Analysis
Sindi, W., Fruhwirth, R., Gamsjäger, E. & Hofstätter, H., 2024, Society of Petroleum Engineers - SPE Canadian Energy Technology Conference and Exhibition, CET 2024. Society of Petroleum Engineers , (Society of Petroleum Engineers - SPE Canadian Energy Technology Conference and Exhibition, CET 2024).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Exploring the Impact of Laser Drilling on Material Thermal Decomposition: A Computational Study Using KratosMultiphysics
Peng, C., Tao, Q., Krivec, T., Casas, G., Latorre, S., Antretter, T., Macher, J. & Fuchs, P., 2024, 2024 25th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2024. Institute of Electrical and Electronics Engineers, (2024 25th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2024).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Finite element analysis of heat transfer in ski presses
Hösele, L., 2024Research output: Thesis › Master's Thesis
- Published
Mean-Field-Model Development for Void Formation in SAC305-Solder Bumps
Huber, A., 2024Research output: Thesis › Master's Thesis
- Published
Parametrization of a numerical model for rolling contact calculations
Otipka, D., 2024Research output: Thesis › Master's Thesis
- Published
Untersuchung des Rissverhaltens von Squats unterhalb der Schienenoberfläche
Avgustinovic, D., 2024Research output: Thesis › Master's Thesis
- 2023
- Published
Impact crusher kinematics: The dynamics of an impact swing mechanism as an analytical-mathematical model
Kemper, D., Fimbinger, E., Antretter, T., Egger, M. & Flachberger, H., 20 Dec 2023, In: Results in Engineering. 21.2024, March, p. 101694 13 p., 101694.Research output: Contribution to journal › Article › Research › peer-review
- E-pub ahead of print
Numerical treatment of reactive diffusion using the discontinuous Galerkin method
Flachberger, W., Svoboda, J., Antretter, T., Petersmann, M. & Leitner, S., 13 Oct 2023, (E-pub ahead of print) In: Continuum Mechanics and Thermodynamics. 36.2024, January, p. 61-74 14 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
A breakage model for DEM based on a probabilistic particle replacement with Voronoi fragments
Denzel, M., Prenner, M., Sifferlinger, N. A. & Antretter, T., 17 Aug 2023, In: Minerals engineering. 203.2023, November, 14 p., 108328.Research output: Contribution to journal › Article › Research › peer-review
- E-pub ahead of print
A breakage model for DEM based on a probabilistic particle replacement with Voronoi fragments
Denzel, M., Prenner, M., Sifferlinger, N. A. & Antretter, T., 17 Aug 2023, (E-pub ahead of print) In: Minerals engineering. 203.2023, November, 14 p., 108328.Research output: Contribution to journal › Article › Research › peer-review
- Published
A note on maxima and minima of dissipation in context of treatment of irreversible thermodynamic systems by application of Extremal Principles
Svoboda, J., Hackl, K. & Fischer, F.-D., Aug 2023, In: Scripta Materialia. 233.2023, August, 5 p., 115519.Research output: Contribution to journal › Article › Research › peer-review
- Published
Variational formulation of Cahn–Hilliard-type diffusion coupled with crystal plasticity
Gaddikere Nagaraja, S., Flachberger, W. & Antretter, T., Aug 2023, In: International journal of plasticity. 167.2023, August, 22 p., 103652.Research output: Contribution to journal › Article › Research › peer-review
- Published
Experimental and Numerical Visualisation of Subsurface Rail Deformation in a Full-Scale Wheel–Rail Test Rig
Gschwandl, T. J., Weniger, T. M., Antretter, T., Künstner, D., Scheriau, S. & Daves, W., Jun 2023, In: Metals. 13.2023, 6, 18 p., 1089.Research output: Contribution to journal › Article › Research › peer-review
- Published
Cyclic Solid-Liquid Phase Transformations in the CaO – SiO 2 System—Experiments and Modelling
Ogris, D., Kircher, V. & Gamsjäger, E., 19 Apr 2023, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 54.2023, June, p. 1555-1564 10 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Residual Stress Evolution in Low-Alloyed Steel at Three Different Length Scales
Leitner, S., Winter, G., Klarner, J., Antretter, T. & Ecker, W., 23 Mar 2023, In: Materials. 16.2023, 7, 17 p., 2568.Research output: Contribution to journal › Article › Research › peer-review
- Published
Fully coupled segregation and precipitation kinetics model with ab initio input for the Fe-Au system
Scheiber, D., Svoboda, J., Fischer, F.-D., Böhm, H. J. & Romaner, L., 1 Jan 2023, In: Acta materialia. 244.2023, 1 January, 11 p., 118577.Research output: Contribution to journal › Article › Research › peer-review
- Published
A method to reduce computation time in finite element simulations of deep rolling
Bialowas, J., Pletz, M., Gapp, S. & Maierhofer, J., 2023, In: Procedia Structural Integrity. 46, p. 49-55 7 p.Research output: Contribution to journal › Conference article › peer-review
- Published
Experimental and numerical investigation of the phenomenon squats in rails
Gschwandl, T. J., 2023Research output: Thesis › Doctoral Thesis
- Published
Finite element investigation of packing rings
Ruetz, M., 2023Research output: Thesis › Master's Thesis
- Published
Implementation of the Heterosegmental PC-SAFT Approach
Gessl, C., 2023Research output: Thesis › Master's Thesis
- Published
Investigation of plastic deformation in wheel-rail contact in differently heat-treated rail materials
Samardzic, D., 2023Research output: Thesis › Master's Thesis
- Published
On the road towards understanding squats: residual stress state of rails
Gschwandl, T. J., Daves, W., Antretter, T., Bucher, C. & Künstner, D., 2023, In: Procedia Structural Integrity. 46, p. 17-23 7 p.Research output: Contribution to journal › Conference article › peer-review
- Published
Oxide particle dissolution in oxide melts during steel production: In-situ experiments and models
Eru, O., 2023Research output: Thesis › Master's Thesis
- Published
Process Models for the Manufacturing of Railway Components
Bialowas, J., 2023Research output: Thesis › Doctoral Thesis
- Published
Production Optimization Using Integrated Modelling and ESP Survival Analysis Based on Historical Data
Sindi, W., Fruhwirth, R., Gamsjäger, E. & Hofstätter, H., 2023, Society of Petroleum Engineers - ADIPEC, ADIP 2023. Society of Petroleum Engineers , (Society of Petroleum Engineers - ADIPEC, ADIP 2023).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Prozessoptimierung mittels multiphysikalischer Modellierung des Widerstandspunktschweißens
Prabitz, K., Antretter, T., Schubert, H., Hilpert, B., Gruber, M., Sierlinger, R., Polcik, P. & Ecker, W., 2023, XLI. Verformungskundliches Kolloquium.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Simulation of the mechanical response of the individual intermetallic phases in multi-phase γ titanium aluminides
Seligmann, B., Spörk-Erdely, P. & Antretter, T., 2023.Research output: Contribution to conference › Poster › Research
- Published
Solid/liquid phase transformations in multi-component slags
Ogris, D. M. & Gamsjäger, E., 2023.Research output: Contribution to conference › Poster › Research
- Published
Thermodynamic and kinetic modelling of solid-liquid phase transformations in multi-component slag systems
Ogris, D., 2023Research output: Thesis › Doctoral Thesis
- 2022
- Published
On shape forming by contractile filaments in the surface of growing tissues
Fratzl, P., Fischer, F.-D., Zickler, G. & Dunlop, J. W. C., 12 Dec 2022, In: PNAS Nexus. 2.2023, 1, 9 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
A Technology-Enhanced ‘Assessment System for Teaching and Assessment using a Computer Algebra Kernel’ (STACK): The Best Contributions of 2022’s STACK Community Meeting at the Montanuniversitaet Leoben, Austria
Orthaber, M. & Antretter, T., 8 Dec 2022, In: International journal emerging technologies in learning : iJET. 17.2022, 23, p. 4-6 3 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Towards virtually optimized curing cycles for polymeric encapsulations in microelectronics
Schipfer, C., Gschwandl, M., Fuchs, P., Antretter, T., Feuchter, M., Morak, M., Tao, Q. & Schingale, A., Dec 2022, In: Microelectronics Reliability. 139.2022, December, 9 p., 114799.Research output: Contribution to journal › Article › Research › peer-review
- Published
Crack path investigations in a pearlitic rail steel after pre-deformation under cyclic Mode-II loading
Schnalzger, G., Daves, W., Pippan, R., Maierhofer, J. & Hohenwarter, A., Oct 2022, In: Engineering Failure Analysis. 140.2022, October, 14 p., 106567.Research output: Contribution to journal › Article › Research › peer-review
- Published
Generalization of classical Hillert's grain growth and LSW theories to a wide family of kinetic evolution equations and stationary distribution functions
Svoboda, J., Zickler, G., Kozeschnik, E. & Fischer, F.-D., 15 Aug 2022, In: Acta Materialia. 235.2022, 15 August, 9 p., 118085.Research output: Contribution to journal › Article › Research › peer-review
- Published
Thermodynamic trapping and diffusion model for multiple species in systems with multiple sorts of traps
Leitner, S., Ecker, W., Fischer, F.-D. & Svoboda, J., Jul 2022, In: Acta Materialia. 233.2022, July, 10 p., 117940.Research output: Contribution to journal › Article › Research › peer-review
- E-pub ahead of print
Towards electro-thermo-mechanical lifetime assessment for arbitrary power electronics
Gschwandl, M., Friedrich, B. E., Pfost, M., Antretter, T., Fuchs, P. F., Mitev, I., Tao, Q. & Schingale, A., 4 May 2022, (E-pub ahead of print) In: Microelectronics Reliability. 133.2022, June, 9 p., 114537.Research output: Contribution to journal › Article › Research › peer-review
- Published
Evolution of chemically induced cracks in alkali feldspar: thermodynamic analysis
Abart, R., Petrishcheva, E., Habler, G., Sutter, C., Fischer, F.-D., Predan, J., Kegl, M. & Rammerstorfer, F. G., 3 May 2022, In: Physics and Chemistry of Minerals. 49.2022, 14, 15 p., 14.Research output: Contribution to journal › Article › Research › peer-review
- E-pub ahead of print
Numerical Treatment of Oxide Particle Dissolution in Multicomponent Slags with Local Gibbs Energy Minimization
Ogris, D. M. & Gamsjäger, E., 19 Apr 2022, (E-pub ahead of print) In: Steel research international. 93.2022, 8, 11 p., 2200056.Research output: Contribution to journal › Article › Research › peer-review
- Published
Erratum to “Energetic balance and kinetics for the decomposition of supersaturated Ti1-xAlxN” [Acta Materialia 55 (2007) 1441–1446]
Mayrhofer, P. H., Fischer, F.-D., Böhm, H. J., Mitterer, C. & Schneider, J. M., 1 Apr 2022, In: Acta Materialia. 227.2022, 1 April, 1 p., 117741.Research output: Contribution to journal › Letter › peer-review
- Published
Strain and interface energy of ellipsoidal inclusions subjected to volumetric eigenstrains: shape factors
Böhm, H. J., Zickler, G. A., Fischer, F.-D. & Svoboda, J., Jan 2022, In: Archive of applied mechanics. 92.2022, ?, p. 405-411 7 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Characterization and modeling of a typical curing material for photoresist films
Peng, C., Morak, M., Thalhamer, A., Gschwandl, M., Fuchs, P., Tao, Q., Krivec, T., Antretter, T. & Celigueta, M. A., 2022, 2022 23rd International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2022. Institute of Electrical and Electronics Engineers, (2022 23rd International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2022).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Computerassisted Thermodynamics: From Gibbs energy minimizers to neural networks
Schatzl, D., 2022Research output: Thesis › Master's Thesis
- Published
Condition Monitoring and Damage Prediction in Railway Applications
Velic, D., 2022Research output: Thesis › Doctoral Thesis
- Published
Cyclic partial phase transformations in CaO-SiO2 slags
Ogris, D. M., Kircher, V. & Gamsjäger, E., 2022.Research output: Contribution to conference › Presentation › Research › peer-review
- Published
Finite element analysis of polymer based cylinder rings of piston compressors
Ruetz, M., 2022Research output: Thesis › Master's Thesis
- Published
Influence of the mobilities of triple junctions and grain boundaries on the kinetics of grain growth
Gamsjäger, E. & Svoboda, J., 2022.Research output: Contribution to conference › Presentation › Research › peer-review
- Published
Material assessment tool for railway crossing components
Schnalzger, G., 2022Research output: Thesis › Doctoral Thesis
- Published
Modelling of lime dissolution in BOF slags using Gibbs energy minimization
Ogris, D. M. & Gamsjäger, E., 2022.Research output: Contribution to conference › Presentation › Research › peer-review
- Published
Multi-physical modelling of resistance spot welding with assessing the risk of liquid metal embrittlement
Prabitz, K., 2022Research output: Thesis › Doctoral Thesis
- Published
Novel microalloying and electrode solutions to avoid liquid metal embrittlement during resistance spot welding of galvanized DP1200HD steel
Prabitz, K. M., 2022, Steels in Cars and Trucks.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Polycrystal diffraction elastic constants of advanced γ-TiAl based sheets
Obersteiner, D., Staron, P., Maawad, E., Ambig, A., Hatzenbichler, L., Holec, D. & Spörk-Erdely, P., 2022.Research output: Contribution to conference › Poster › Research
- Published
Simulation-Based Approaches for Optimized Tap-Hole Design
Unterreiter, G., Ishmurzin, A., Marschall, H. U. & Spanring, A., 2022, Furnace Tapping 2022.Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research
- Published
Thermodynamic functions of crystalline solids: Statistical evaluation of experimental data
Gamsjäger, E., Loridant, B. & Wiessner, M., 2022.Research output: Contribution to conference › Presentation › Research › peer-review
- 2021
- Published
A comparison of theory and simulation with microgravity experiments on phase coarsening
Wang, K. G., Wang, G. Q., Gamsjäger, E. & Glicksman, M. E., Dec 2021, In: Acta Materialia. 221, 117402.Research output: Contribution to journal › Article › Research › peer-review
- Published
Heat capacities and standard entropies and enthalpies of some compounds essential for steelmaking and refractory design approximated by Debye-Einstein integrals
Ogris, D. M. & Gamsjäger, E., Dec 2021, In: Calphad: Computer Coupling of Phase Diagrams and Thermochemistry. 75.2021, December, 15 p., 102345.Research output: Contribution to journal › Article › Research › peer-review
- Published
Liquid Metal Embrittlement of Advanced High Strength Steel: Experiments and damage modeling
Prabitz, K., Asadzadeh, M. Z., Pichler, M., Antretter, T., Beal, C., Schubert, H., Hilpert, B., Gruber, M., Sierlinger, R. & Ecker, W., 21 Sept 2021, In: Materials. 14.2021, 18, 15 p., 5451.Research output: Contribution to journal › Article › Research › peer-review
- Published
Validated multi-physical finite element modelling of the spot welding process of the advanced high strength steel dp1200hd
Prabitz, K., Pichler, M., Antretter, T., Schubert, H., Hilpert, B., Gruber, M., Sierlinger, R. & Ecker, W., 18 Sept 2021, In: Materials. 14.2021, 18, 19 p., 5411.Research output: Contribution to journal › Article › Research › peer-review
- Published
An atomistic view on Oxygen, antisites and vacancies in the γ-TiAl phase
Razumovskiy, V. I., Ecker, W., Wimler, D., Fischer, F.-D., Appel, F., Mayer, S. & Clemens, H., Sept 2021, In: Computational materials science. 197.2021, September, 8 p., 110655.Research output: Contribution to journal › Article › Research › peer-review
- Published
Characterization of high speed steels – In-situ experimental data and their evaluation supported by machine learning algorithms
Gamsjäger, E. & Wießner, M., Sept 2021.Research output: Contribution to conference › Presentation › Research › peer-review
- Published
Surface stress of gold nanoparticles revisited
Holec, D., Löfler, L., Zickler, G., Vollath, D. & Fischer, F.-D., 1 Aug 2021, In: International journal of solids and structures. 224.2021, 1 August, p. 1-13 13 p., 111044.Research output: Contribution to journal › Article › Research › peer-review
- Published
Ductile failure modelling in pre-cracked solids using coupled fracture locus theory
Baltic, S., Magnien, J., Kolitsch, S., Gänser, H.-P., Antretter, T. & Hammer, R., Jul 2021, In: Engineering Fracture Mechanics. 252.2021, July, 13 p., 107845.Research output: Contribution to journal › Article › Research › peer-review
- Published
MUL 4.0 – Digitalisierung der Wertschöpfungskette vom Rohmaterial bis hin zum Recycling
Woschank, M., Ralph, B. J., Kaiblinger, A., Miklautsch, P., Pacher, C., Sorger, M., Zsifkovits, H., Stockinger, M., Pogatscher, S., Antretter, T. & Antrekowitsch, H., 2 Jun 2021, In: Berg- und hüttenmännische Monatshefte : BHM. 166, 6, p. 309-313Research output: Contribution to journal › Article › Research › peer-review
- Published
Evaluation of Cement-Casing & Cement-Rock Bond Integrity during Well Operations.
Lamik, A., Thonhauser, G., Ravi, K., Prohaska-Marchried, M., Pittino, G. & Antretter, T., 27 May 2021, p. 1-13. 13 p.Research output: Contribution to conference › Paper › peer-review
- Published
Machine learning assisted calibration of a ductile fracture locus model
Baltic, S., Asadzadeh, M. Z., Hammer, P., Magnien, J., Gänser, H. P., Antretter, T. & Hammer, R., May 2021, In: Materials and Design. 203.2021, May, 15 p., 109604.Research output: Contribution to journal › Article › Research › peer-review
- Published
Electro-Thermo-Mechanical Reliability Assessment of Arbitrary Power Electronics
Gschwandl, M., Pfost, M., Antretter, T., Fuchs, P. F., Mitev, I., Tao, Q. & Schingale, A., 19 Apr 2021, 2021 22nd International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2021. Institute of Electrical and Electronics Engineers, 9410862. (2021 22nd International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2021).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Prediction of Curing Induced Residual Stresses in Polymeric Encapsulation Materials for Microelectronics
Schipfer, C., Gschwandl, M., Fuchs, P., Antretter, T., Feuchter, M., Morak, M., Tao, Q. & Schingale, A., 19 Apr 2021, 2021 22nd International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2021. Institute of Electrical and Electronics Engineers, 9410855. (2021 22nd International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2021).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Role of elastic strain energy in spheroidal precipitates revisited
Böhm, H. J., Zickler, G., Fischer, F.-D. & Svoboda, J., Apr 2021, In: Mechanics of materials. 155, April, 6 p., 103781.Research output: Contribution to journal › Article › Research › peer-review
- Published
Solutions of critical raw materials issues regarding iron-based alloys
Novák, P., Bellezze, T., Cabibbo, M., Gamsjäger, E., Wießner, M., Rajnovic, D., Jaworska, L., Hanus, P., Shishkin, A., Goel, G. & Goel, S., 2 Feb 2021, In: Materials. 14, 4, p. 1-36 36 p., 899.Research output: Contribution to journal › Review article › peer-review
- Published
Analysis of shape, orientation and interface properties of Mo2C precipitates in Fe using ab-initio and finite element method calculations
Leitner, S., Scheiber, D., Dengg, T., Spitaler, J., Antretter, T. & Ecker, W., 1 Feb 2021, In: Acta materialia. 204.2021, 1 February, 11 p., 116478.Research output: Contribution to journal › Article › Research › peer-review
- Published
Thermal and Moisture Dependent Material Characterization and Modeling of Glass Fibre Reinforced Epoxy Laminates
Yalagach, M., Fuchs, P., Antretter, T., Feuchter, M., Tao, Q. & Weber, M., 29 Jan 2021, In: Sensors & transducers. 248.2021, 1, 9 p.Research output: Contribution to journal › Article › Research › peer-review
- Published
Alle(s) digital im Studium?! Projektbericht der Steirischen Hochschulkonferenz zur Analyse digitaler Kompetenzen von Studienanfänger*inne*n
Orthaber, M. (Editor), Janschitz, G. (Editor), Monitzer, S. (Editor), Archan, D. (Editor), Dreisiebner, G. (Editor), Ebner, M. (Editor), Hye, F. (Editor), Kopp, M. (Editor), Mossböck, C. (Editor), Nagler, W. (Editor), Rechberger, M. (Editor), Rehatschek, H. (Editor), Slepcevic-Zach, P. (Editor), Stock, M. (Editor), Swoboda, B. (Editor) & Teufel, M. (Editor), 2021, Graz. 137 p.Research output: Book/Report › Commissioned report › Research
- Published
Characterization of high speed steels _ In situ experimental data and their evaluation supported by machine learning algorithms
Gamsjäger, E. & Wiessner, M., 2021.Research output: Contribution to conference › Paper › peer-review
- Published
Computational assessment of damage in switch rails by means of dynamic FE-analyses and a new material assessment software
Gapp, S., 2021Research output: Thesis › Master's Thesis
- Published
- Published
Einfluss der Mobilitäten der Tripelpunkte und Korngrenzen auf die Kinetik des Kornwachstums
Gschöpf, B., 2021Research output: Thesis › Master's Thesis
- Published
Fatigue crack growth of deformed pearlitic rail steels under multiaxial loading
Schnalzger, G., Maierhofer, J., Daves, W., Pippan, R. & Hohenwarter, A., 2021, In: Procedia Structural Integrity. 39, C, p. 313-326 14 p.Research output: Contribution to journal › Conference article › peer-review
- Published
FE-Simulation zur Vorhersage von Phasenspannungen mit dem Ziel der Vermeidung von Härterissen während der Wärmebehandlung
Posch, C., 2021Research output: Thesis › Master's Thesis
- Published
Fundamentals and prevention of zinc induced embrittlement in steel sheets during the direct press hardening process
Tomasch, M., 2021Research output: Thesis › Doctoral Thesis
- Published
Gibbs energy minimization and particle dissolution
Ogris, D., Schenk, J. & Gamsjäger, E., 2021.Research output: Contribution to conference › Presentation › Research › peer-review
- Published
Investigating the possibility to solve the Hamilton-Jacobi-Bellman Equation by the Finite Element Method to enable feedback control of nonlinear dynamical systems
Flachberger, W., 2021Research output: Thesis › Master's Thesis
- Published
Kinetically constrained Gibbs energy minimization applied to particle dissolution
Ogris, D. M. & Gamsjäger, E., 2021.Research output: Contribution to conference › Presentation › Research › peer-review
