Thomas Antretter

101 - 200 out of 236Page size: 100

Research output

  1. 2015
  2. Published

    An inverse finite element approach to calculate full-field forming strains

    Ritt, R., Machado, M., Fischlschweiger, M., Major, Z. & Antretter, T., Jul 2015, Key engineering materials. Vol. 651-653.2015. p. 363-368 6 p. (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  3. Published

    The relation of temperature, microwave absorbing properties and thermo - dynamic behavior of selected hard rocks

    Hartlieb, P., Toifl, M., Meisels, R., Antretter, T. & Kuchar, F., 11 Jun 2015, Physical Separation 15 - Proceedings.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  4. Published

    The relation of temperature, microwave absorbing properties and thermo-dynamic properties of selected hard rocks

    Hartlieb, P., Toifl, M., Meisels, R., Antretter, T. & Kuchar, F., 11 Jun 2015.

    Research output: Contribution to conference › Presentation › Research

  5. Published

    NUMERICAL ANALYSIS OF THE ROCK CUTTING PROCESS BASED ON A TWO PARAMETER DESCRIPTION OF TENSILE STRENGTH USING THE WEIBULL THEORY

    Mikl-Resch, M. J., Tichy, R., Antretter, T., Pittino, G., Galler, R., Ecker, W., Gimpel, M. & Kargl, H., 13 May 2015. 5 p.

    Research output: Contribution to conference › Presentation › Research › peer-review

  6. Published

    NUMERICAL ANALYSIS OF THE ROCK CUTTING PROCESS BASED ON A TWO PARAMETER DESCRIPTION OF TENSILE STRENGTH USING THE WEIBULL THEORY

    Mikl-Resch, M. J., Antretter, T., Tichy, R., Pittino, G., Galler, R., Ecker, W., Gimpel, M. & Kargl, H., 10 May 2015, ISRM 2015_PROCEEDINGS. 5 p. 724

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  7. Published

    NUMERICAL ANALYSIS OF THE ROCK CUTTING PROCESS BASED ON A TWO PARAMETER DESCRIPTION OF TENSILE STRENGTH USING THE WEIBULL THEORY

    Mikl-Resch, M. J., Antretter, T., Tichy, R., Pittino, G., Galler, R., Ecker, W., Gimpel, M. & Kargl, H., 10 May 2015. 5 p.

    Research output: Contribution to conference › Poster › Research

  8. Published

    Fracture mechanics of thin film systems on the sub-micron scale

    Kozic, D., Treml, R., Schongrundner, R., Brunner, R., Kiener, D., Zechner, J., Antretter, T. & Ganser, H. P., 6 May 2015, 2015 16th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2015. Institute of Electrical and Electronics Engineers, 7103088

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. Published

    Comparison of Different Methods for Stress and Deflection Analysis in Embedded die Packages during the Assembly Process

    Macurova, K., Bermejo, R., Pletz, M., Schöngrundner, R., Antretter, T., Krivec, T., Morianz, M., Brizoux, M. & Lecavelier, A., 1 Apr 2015, In: Journal of Microelectronics and Electronic Packaging. 12.2015, 2, p. 80-85 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    3D numerical study on microwave induced stresses in inhomogeneous hard rocks

    Toifl, M., Meisels, R., Hartlieb, P., Kuchar, F. & Antretter, T., 2015.

    Research output: Contribution to conference › Presentation › Research

  11. Published

    3D numerical study on microwave induced stresses in inhomogeneous hard rocks

    Toifl, M., Meisels, R., Hartlieb, P., Kuchar, F. & Antretter, T., 2015.

    Research output: Contribution to conference › Paper

  12. Published

    Experimental characterization and modelling of triaxial residual stresses in straightened railway rails

    Kaiser, R., Stefenelli, M., Hatzenbichler, T., Antretter, T., Hofmann, M., Keckes, J. & Buchmayr, B., 2015, In: The Journal of Strain Analysis for Engineering Design. 50, 3, p. 190-198 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Influence of the microstructure on rock damage during microwave irradiation: a 3D numerical analysis

    Toifl, M., Meisels, R., Hartlieb, P., Kuchar, F. & Antretter, T., 2015, Proceedings of Eurock 2015. Schubert, W. & Kluckner, A. (eds.). p. 731-736

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  14. Published

    Influence of the microstructure on rock damage during microwave irradiation: A 3D numerical analysis

    Toifl, M., Meisels, R., Hartlieb, P., Kuchar, F. & Antretter, T., 2015, Future Development of Rock Mechanics: Proceedings of the SRM Regional Symposium EUROCK 2015 & 64th Geomechanics Colloquium. Schubert, W. & Kluckner, A. (eds.). Salzburg: Österreichische Gesellschaft für Geomechanik, p. 731-736

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  15. Published

    Influence of the microstructure on rock damage during microwave irradiation: A 3D numerical analysis

    Toifl, M., Meisels, R., Hartlieb, P., Kuchar, F. & Antretter, T., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  16. Published

    Microwave absorption and its thermo-mechanical consequences in heterogeneous rocks

    Toifl, M., Meisels, R., Hartlieb, P., Kuchar, F. & Antretter, T., 2015, Geomechanics from Micro to Macro - Proceedings of the TC105 ISSMGE International Symposium on Geomechanics from Micro to Macro, IS-Cambridge 2014. Vol. 2. p. 1545-1550 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    Microwave propagation and absorption and its thermo-mechanical consequences in heterogeneous rocks

    Meisels, R., Toifl, M., Hartlieb, P., Antretter, T. & Kuchar, F., 2015, In: International Journal of Mineral Processing. 135, p. 40-51

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Multi-scale modeling of bainitic phase transformation in multi-variant polycrystalline low alloy steels

    Mahnken, R., Schneidt, A., Antretter, T., Ehlenbröker, U. & Wolff, M., 2015, In: International journal of solids and structures. 54, p. 156-171

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Numerical calibration of a yield limit function for rock materials by means of the Brazilian test and the uniaxial compression test

    Mikl-Resch, M. J., Antretter, T., Gimpel, M., Kargl, H., Pittino, G., Tichy, R., Ecker, W. & Galler, R., 2015, In: International Journal of Rock Mechanics and Mining Sciences. 74, p. 24-29

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Relaxation of a Precipitate Misfit Stress State by Creep in the Matrix

    Fischer, F. D., Svoboda, J., Antretter, T. & Kozeschnik, E., 2015, In: International journal of plasticity. 64, p. 164-176

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Simulation des thermomechanischen Verhaltens von Grobblechen während der Schnellkühlung

    Eßl, W., Antretter, T. & Parteder, E., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  22. Published

    Size effects in residual stress formation during quenching of cylinders made of hot-work tool steel

    Schemmel, M., Prevedel, P., Schöngrundner, R., Ecker, W. & Antretter, T., 2015, In: Advances in Materials Science and Engineering. 7 p., 678056.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Stress and Deflection Development During Die Embedding into Printed Circuit Boards

    Macurova, K., Angerer, P., Bermejo, R., Pletz, M., Schöngrundner, R., Antretter, T., Krivec, T., Morianz, M., Brizoux, M. & Lecavelier, A., 2015, In: Materials Today: Proceedings. 2, 2, p. 4196-4205 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    The rock cutting process of road headers - Overview of laboratory tests and numerical simulation

    Pittino, G., Galler, R., Mikl-Resch, M. J., Tichy, R., Ecker, W., Antretter, T., Gimpel, M. & Kargl, H., 2015, Future Development of Rock Mechanics: Proceedings of the ISRM Regional Symposium Eurock 2015 & 64th Geomechanics Colloquium. Schubert, W. & Kluckner, A. (eds.). Salzburg: Eigenverlag, p. 243-248 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  25. 2014
  26. Published

    The role of phase interface energy in martensitic transformation: A lattice Monte-Carlo simulation

    Yastrebov, V. A., Fischlschweiger, M., Cailletaud, G. & Antretter, T., Mar 2014, In: Mechanics Research Communications. 56, p. 37-41

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Comparison of different methods for stress and deflection analysis in embedded die packages during the assembly process

    Macurova, K., Bermejo Moratinos, R., Pletz, M., Schöngrundner, R., Antretter, T., Krivec, T., Morianz, M., Brizoux, M. & Lecavelier, A., 1 Jan 2014, Proceedings - 2014 47th International Symposium on Microelectronics, IMAPS 2014. p. 355-360 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  28. Published

    Characterization and modeling of the AuSnCu thin solder joint under thermal cycling

    Pélisset, T., Karunamurthy, B., Otremba, R. & Antretter, T., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  29. Published

    Characterization and modeling of the AuSnCu thin solder joint under thermal cycling

    Antretter, T., Otremba, R., Karunamurthy, B. & Pélisset, T., 2014, Proceedings of the 15th International Conference on Thermal, Mechanical & Multi-Physics Simulation and Experiments in Microelectronics and Microsystems EuroSimE 2014.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. Published

    Critical assessment of the determination of residual stress profiles in thin films by means of the ion beam layer removal method

    Schöngrundner, R., Treml, R., Antretter, T., Kozic, D., Ecker, W. & Kiener, D., 2014, In: Thin solid films. p. 321-330

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Determination of cyclic mechanical properties of thin copper layers for PCB applications

    Fellner, K., Fuchs, P. F., Antretter, T., Pinter, G. & Schöngrundner, R., 2014, Proceedings 15th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  32. Published

    Evaluation of the residual stress distribution in thin films by means of the ion beam layer removal method

    Kozic, D., Treml, R., Schöngrundner, R., Brunner, R., Kiener, D., Antretter, T. & Gänser, H.-P., 2014, Proceedings of the 15th International Conference on Thermal, Mechanical & Multi-Physics Simulation and Experiments in Microelectronics and Microsystems EuroSimE 2014. Zhang, G. Q., Van Driel, W. D., Rodgers, P., Bailey, C. & de Saint Leger, O. (eds.). Institute of Electrical and Electronics Engineers, 6813785

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  33. Published

    Festigkeitsskalierung nach Weibull

    Pittino, G., Tichy, R., Galler, R., Antretter, T., Ecker, W., Gimpel, M. & Kargl, H., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  34. Published

    Method development for the cyclic characterization of thin copper layers for PCB applications

    Fellner, K., Fuchs, P. F., Pinter, G., Antretter, T. & Krivec, T., 2014, In: Circuit World. 40, p. 53-60

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Microwave absorption and its thermo-mechanical consequences in heterogeneous rocks

    Toifl, M., Meisels, R., Hartlieb, P., Kuchar, F. & Antretter, T., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  36. Published

    Microwave absorption and its thermo-mechanical consequences in heterogeneous rocks

    Toifl, M., Meisels, R., Hartlieb, P., Kuchar, F. & Antretter, T., 2014, Geomechanics from Micro to Macro. p. 1545-1550

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. Published

    Modelling of phase transformations and residual stress formation in hot-work tool steel components

    Schemmel, M., Prevedel, P., Schöngrundner, R., Ecker, W. & Antretter, T., 2014, European Conference of Heat Treatment and 21st IFHTSE Congress. p. 285-292

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  38. Published

    Residual Stress Investigations in Thin Film Systems: Experiment and Simulation

    Kozic, D., Treml, R., Sartory, B., Schöngrundner, R., Kiener, D., Antretter, T., Gänser, H.-P. & Brunner, R., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  39. Published

    Simulation of stress distribution in assembled silicon dies and deflection of printed circuit boards

    Macurova, K., Angerer, P., Antretter, T., Bermejo Moratinos, R., Maia, W., Schöngrundner, R., Krivec, T., Morianz, M. & Brizoux, M., 2014, Proceedings of the 15th International Conference on Thermal, Mechanical & Multi-Physics Simulation and Experiments in Microelectronics and Microsystems EuroSimE 2014.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. Published

    Simulation of the roller straightening process with respect to residual stresses and the curvature trend

    Kaiser, R., Hatzenbichler, T., Buchmayr, B. & Antretter, T., 2014, International Conference on Residual Stresses 9 (ICRS 9). p. 456-463

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  41. 2013
  42. Published

    Multi-physics simulation of the component attachment within embedding process

    Macurova, K., Kharicha, A., Pletz, M., Mataln, M., Bermejo, R., Schongrundner, R., Krivec, T., Antretter, T., Maia, W., Morianz, M. & Brizoux, M., 1 Apr 2013, 14th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2013. Institute of Electrical and Electronics Engineers, p. 1-6 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  43. Published

    An Efficient Algorithm for Modeling the Thermo-Mechanical Material Response of Havy Steel Plates during Accelerated Cooling

    Eßl, W., Antretter, T. & Parteder, E., 2013, Key engineering materials. Vol. 554-557. p. 749-763 (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  44. Published

    Determination of Uniaxial Tensile Strength of Rock Materials with Numerical Methods

    Mikl, M., Antretter, T., Gimpel, M. & Pittino, G., 2013, Proceedings of The Third International Conference on Computational Methods in Tunneling and Subsurface Engineering. p. 457-464

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  45. Published

    Development and testing of a technique for the simulation of the rock cutting process

    Mikl, M. J., Tichy, R., Ecker, W., Antretter, T. & Pittino, G., 2013, Proceedings of Research and Applications in Structural Engineering, Mechanics and Computation. p. 505-510 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    Development and testing of a technique fort he simulation oft he rock cutting process

    Mikl, M., Tichy, R., Ecker, W., Antretter, T. & Pittino, G., 2013, Research and Applications in Structural Engineering, Mechanics and Computation. p. 505-510

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    Entwicklung und Test einer Methode zur Simulation des Gesteinsschneidens mit der Finiten Elemente Methode

    Mikl, M. J., Tichy, R., Ecker, W., Antretter, T., Gimpel, M., Kargl, H., Pittino, G. & Galler, R., 2013, In: Berg- und hüttenmännische Monatshefte : BHM. p. 507-513

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Maximum Dissipation Crystal Plasticity - an approach to select active slip systems

    Orthaber, M., Antretter, T. & Gänser, H.-P., 2013, CM13: Proceedings of the International Conference on Computational Mechanics. p. ---

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  49. Published

    Numerical Simulations in the field of Geotechnics and Underground Engineering - Examples of Research and Development Projects

    Galler, R., Volderauer, C., Marcher, T., Kargl, H., Gimpel, M., Mikl, M., Ecker, W., Tichy, R., Antretter, T., Gschwandtner, G., Pittino, G., Entacher, M., Lorenz, S., Schuller, E. & Mödlhammer, H., 2013, In: Berg- und hüttenmännische Monatshefte : BHM. p. 189-197

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    On the selection of active slip systems in rate independent crystal plasticity

    Orthaber, M., Antretter, T. & Gänser, H.-P., 2013, Key engineering materials. Vol. 554-557. p. 1147-1156 (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  51. Published

    Some Examples for Advanced Numerical Solutions Pushing the Limits of Commercial Software

    Antretter, T., Hasenhütl, E., Eßl, W., Hofmann, A., Ecker, W., Heiss, C., Galler, R. & Parteder, E., 2013, In: Berg- und hüttenmännische Monatshefte : BHM. p. 211-214

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Transformation hardening and kinetics for stress assisted and temperature driven transformation in steels

    Fischlschweiger, M., Antretter, T. & Cailletaud, G., 2013, In: Mechanics Research Communications. 47, p. 84-88

    Research output: Contribution to journal › Article › Research › peer-review

  53. 2012
  54. Published

    Active slip systems in crystal plasticity and the principle of maximum dissipation

    Orthaber, M., Antretter, T., Gänser, H.-P. & Ecker, W., 2012, Proceeding of the 5th International Conference from Scientific Computing to Computational Engineering. p. 36-41

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  55. Published

    A mean-field model for transformation induced plasticity including backstress effects for non-proportional loadings

    Fischlschweiger, M., Cailletaud, G. & Antretter, T., 2012, In: International journal of plasticity. p. 53-71

    Research output: Contribution to journal › Article › Research › peer-review

  56. Published

    Caloric Effects in Ferroic Materials: New Concepts for Cooling: Projektantrag; Theoretical, Experimental, Basic - Fundamental (Grundlagenforschung)

    Antretter, T. (Reviewer), 2012, 180 p. Dresden

    Research output: Other contribution › Transfer › peer-review

  57. Published

    Convergence tests - Influence of modelling on the dynamic vibration behaviour of coaches

    Böhler, E., Antretter, T., Magerl, F. & Rosenberger, M., 2012, Generation and Propagation of Sound in Solids and Fluids - Modern Analysis Methods in Acoustics. p. 1-9

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  58. Published

    Crystal orientation changes: a comparison of crystal plasticity finite element study and experimental results

    Rehrl, C., Völker, B., Kleber, S., Antretter, T. & Pippan, R., 2012, In: Acta materialia. p. 2379-2386

    Research output: Contribution to journal › Article › Research › peer-review

  59. Published

    CRYSTAL PLASTICITY AND THE MAXIMUM RATE OF DISSIPATION

    Gänser, H.-P., Antretter, T., Ecker, W. & Orthaber, M., 2012, Book of Abstracts of 10th World Congress on Computational Mechanics. p. 100-100

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  60. Published

    Crystal Plasticity using the Principle of Maximum Dissipation

    Orthaber, M., Antretter, T. & Ecker, W., 2012, Book of Abstracts of ESMC-2012 - 8th European Solid Mechanics Conference. p. ---

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  61. Published

    Damage of basalt induced by microwave irradiation

    Hartlieb, P., Leindl, M., Kuchar, F., Antretter, T. & Moser, P., 2012, In: Minerals engineering. p. 82-89

    Research output: Contribution to journal › Article › Research › peer-review

  62. Published

    Development of Techniques for Rock Cutting Applications

    Mikl, M., Antretter, T. & Pittino, G., 2012, European Mechanics Society, Book of Abstracts: ESMC-2012 - 8th European Solid Mechanics Conference, Graz, Austria, July 9-13, 2012. Holzapfel, G. A. & Ogden, R. W. (eds.). Graz

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  63. Published

    Einfluss der zyklischen Verformung auf das Phasenumwandlungsverhalten in Heusler Legierungen für magnetokalorische Anwendungen: Auftraggeber: Deutsche Forschungsgesellschaft; Gutachten eines Projektantrags; Theoretical, Experimental, Basic - Fundamental (Grundlagenforschung)

    Antretter, T. (Reviewer), 2012, 20 p.

    Research output: Other contribution › Transfer › peer-review

  64. Published

    Experimental and numerical investigation of damage due to thermo mechanical fatigue of brake disks for railway applications

    Raninger, P., Ecker, W. & Antretter, T., 2012, Proceedings of 3rd Fatigue Symposium. p. 236-247

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  65. Published

    Finite Element Modeling of the Cyclic Wetting Mechanism in the Active Part of Wheat Awns

    Zickler, G., Ruffoni, D., Dunlop, J. W. C., Elbaum, R., Weinkamer, R., Fratzl, P. & Antretter, T., 2012, In: Biointerphases. 7, p. 42-42

    Research output: Contribution to journal › Article › Research › peer-review

  66. Published

    Finite Element Modeling of the Humidity-driven Wetting Mechanism of Wheat Awns

    Zickler, G., Dunlop, J. W. C., Ruffoni, D., Elbaum, R., Weinkamer, R., Fratzl, P. & Antretter, T., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  67. Published

    Finite Element Modeling of the Humidity-driven Wetting Mechanism of Wheat Awns

    Zickler, G., Dunlop, J. W. C., Ruffoni, D., Elbaum, R., Weinkamer, R., Fratzl, P. & Antretter, T., 2012, Proceedings of the 8th European Solid Mechanics Conference. p. 1-2

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  68. Published

    Interaction of heat checks in aluminum pressure casting dies and their effect on fatigue life

    Raninger, P., Ecker, W., Antretter, T., Leindl, M. & Ebner, R., 2012, Key engineering materials. Vol. 488-489. p. 626-629 (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  69. Published

    Macro-, Meso Scale Modeling of TRIP - Nonlinear Scale Transitions Rules

    Antretter, T., Fischlschweiger, M. & Cailletaud, G., 2012, Non-Linear Response of Conventional & Advanced Materials, and Multi-scale Modeling. p. 97-99

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  70. Published

    Nanostructured shape memory alloys

    Antretter, T., Fischer, F. D., Kompatscher, A. E., Müllner, P., Mangler, C., Peterlechner, M., Steiner, G. & Waitz, T., 2012, Structures and Systems.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  71. Published

    Simulation der Lagerverluste in Großmotoren und deren Validierung

    Antretter, T. (Reviewer), 2012, Graz : Eigenverlag.

    Research output: Other contribution › Transfer › peer-review

  72. Published

    Simulation of the roller straightening process with respect to residual stresses and the curvature trend

    Kaiser, R., Hatzenbichler, T., Buchmayr, B. & Antretter, T., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  73. Published

    Solution of a time-dependent heat conduction problem by an integral-equation approach

    Leindl, M., Oberaigner, E. & Antretter, T., 2012, In: Computational materials science. p. 178-181

    Research output: Contribution to journal › Article › Research › peer-review

  74. Published

    Thermo-Mechanical Behaviour of Dual-Phase Steels in Various Structural Morphologies: Experiments and Modelling

    Buchmayr, B. & Antretter, T., 2012, THERMEC 2011 : International Conference on Processing and Fabrication of Advanced Materials ; processing, fabrication, properties, applications ; August 1 - 5, 2011, Quebec City, Canada . p. 2072-2077 (Materials science forum; vol. 706-709).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  75. Published

    Ultrafine -grained shape memory alloys

    Antretter, T., Fischer, F. D., Kompatscher, A. E., Müllner, P., Mangler, C., Peterlechner, M., Pranger, W., Steiner, G. & Waitz, T., 2012, TMS Annual.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  76. 2011
  77. Published

    The study of controlled cooling technology and warping of X65 heavy pipeline plate

    Zhang, D. F., Lu, J. S., Antretter, T., Lü, J. G. & Song, P., 1 Dec 2011, In: Beijing Gongye Daxue Xuebao/Journal of Beijing University of Technology. 37, 12, p. 1886-1891 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  78. Published

    A space-time concept for martensitic phase transformation based on statistical physics

    Oberaigner, E. R., Fischlschweiger, M. & Antretter, T., 4 May 2011, The 14th International ESAFORM Conference on Materials Forming: ESAFORM 2011. Menary, G. (ed.). AIP, American Inst. of Physics, Vol. 1353. p. 97-102 6 p. (AIP conference proceedings; vol. 1353).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  79. Published

    A mean field model for transformation induced plasticity including backstress effects

    Cailletaud, G., Fischlschweiger, M. & Antretter, T., 2011, Compact Paper International Symposium on Plasticity 2011. p. 1-3

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  80. Published

    A Meanfield Model for Transformation Induced Plasticity Including Backstress Effects

    Cailletaud, G., Fischlschweiger, M. & Antretter, T., 2011, Macro- to Nano-scale Inelastic Deformation and Failure of Materials & Multi-scale Modeling . p. 100-102

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  81. Published

    A methodology to study crystal plasticity inside a compression test sample based on image correlation and EBSD

    Rehrl, C., Kleber, S., Antretter, T. & Pippan, R., 2011, In: Materials characterization. p. 793-800

    Research output: Contribution to journal › Article › Research › peer-review

  82. Published

    A multi-block-spin approach for martensitic phase transformation based on statistical physics

    Fischlschweiger, M., Oberaigner, E., Antretter, T. & Cailletaud, G., 2011, Behavior and Mechanics of Multifunctional Materials and Composites 2011. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  83. Published

    A multi-block-spin-method based on statistical physics describing martensitic phase transformation

    Fischlschweiger, M., Oberaigner, E., Cailletaud, G. & Antretter, T., 2011, Technical Summaries SPIE Smart Structures/NDE 2011. p. 81-81

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  84. Published

    A phenomenological mean field model for coupling phase transformation with plasticity

    Fischlschweiger, M., Cailletaud, G., Antretter, T. & Oberaigner, E., 2011, Advances in heterogeneous material mechanics ICHMM3. p. 738-745

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  85. Published

    Improved Multi-Particle Unit Cell Models for Studying Particle Reinforced Composites: Dissertation Azra Razool

    Antretter, T. (Reviewer), 2011, Wien

    Research output: Other contribution › Transfer › peer-review

  86. Published

    Martensitic Phase Transformations of Nanocrystalline NiTi Shape Memory Alloys Processed by Repeated Cold Rolling

    Peterlechner, M., Waitz, T., Gammer, C. & Antretter, T., 2011, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 102, p. 634-642

    Research output: Contribution to journal › Article › Research › peer-review

  87. Published

    Multifunctional Shape Memory Alloys processed by SPD

    Waitz, T., Mangler, C., Antretter, T., Fischer, F.-D., Pranger, W. & Müllner, P., 2011, Proceedings of International Symposium on Giant Straining Process for Advanced Materials (GSAM). p. 88-94

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  88. Published

    Multifunctional Shape Memory Alloys Processed by SPD

    Waitz, T., Mangler, C., Steiner, G., Peterlechner, M., Antretter, T., Fischer, F. D. & Pranger, W., 2011, Proceedings of International Symposium on Giant Straining Process for Advanced Materials (GSAM). p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  89. Published

    Neue Modellierungskonzepte für TRIP – Tranformation Induced Plasticity

    Antretter, T., Fischlschweiger, M. & Cailletaud, G., 2011, Tagungsband. p. 75-79

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  90. Published

    Solution of a time-dependent heat conduction problem by an integral-equation approach

    Leindl, M., Oberaigner, E. & Antretter, T., 2011, In: Computational materials science. p. 178-181

    Research output: Contribution to journal › Article › Research › peer-review

  91. Published

    The cyclic elasto-viscoplastic behavior of a high-speed steel under forging conditions - experiments and simulation

    Ishmurzin, A., Ecker, W., Krobath, M., Orthaber, M., Marsoner, S. & Antretter, T., 2011, In: Procedia Engineering. 10, p. 1991-1996

    Research output: Contribution to journal › Article › Research › peer-review

  92. Published

    The cyclic elasto-viscoplastic behavior of a high-speed steel under forging conditions - experiments and simulations

    Ishmurzin, A., Ecker, W., Krobath, M., Orthaber, M., Marsoner, S. & Antretter, T., 2011, In: Procedia Engineering. 10, p. 1991-1996

    Research output: Contribution to journal › Article › Research › peer-review

  93. 2010
  94. Published

    An Integral-equation Approach to Solve Time-dependent Heat Conduction Problems

    Oberaigner, E., Leindl, M. & Antretter, T., 2010, International Congress of Mathematics, Abstracts, Short Communications, Posters. p. 723-724

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  95. Published

    Experimental validation of microstructure evolution in crystalline materials

    Rehrl, C., Kleber, S., Antretter, T. & Pippan, R., 2010, In: Journal of physics / Conference series. p. 1-4

    Research output: Contribution to journal › Article › Research › peer-review

  96. Published

    Modelling and Simulation of Phase Transformation-Mechanics Coupling Using a Phase Field Method: Dissertation Kais Ammar

    Antretter, T. (Reviewer), 2010, Paris

    Research output: Other contribution › Transfer › peer-review

  97. Published

    Modelling Transformation Induced Plasticity – An Application to Heavy Steel Plates

    Antretter, T., Zhang, D. & Parteder, E., 2010, In: Steel research international. 81, p. 675-680

    Research output: Contribution to journal › Article › Research › peer-review

  98. Published

    Phänomenologische und mikroskopische Modellierung von Formgedächtnislegierungen: Dissertation Stefan Wilmanns

    Antretter, T. (Reviewer), 2010, Paderborn

    Research output: Other contribution › Transfer › peer-review

  99. Published

    Solution of a time-dependent thermoelastic problem by an integral-equation approach

    Leindl, M., Oberaigner, E. & Antretter, T., 2010, IWCMM20 - International Workshop on Computational Mechanics of Materials, Book of Abstracts. p. 50-50

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  100. Published

    Study of nanometer-scaled lamellar microstructure in a Ti-45Al-7.5Nb alloy-Experiments and modeling

    Fischer, F. D., Waitz, T., Scheu, C., Cha, L., Dehm, G., Antretter, T. & Clemens, H., 2010, In: Intermetallics. 18, p. 509-517

    Research output: Contribution to journal › Article › Research › peer-review

  101. Published

    The Correlation between Grain Size and Martensite Morphology in Nano-Structured NiTi Shape Memory Alloys

    Pranger, W., Antretter, T., Waitz, T. & Fischer, F. D., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  102. Published

    Time-Dependent Heat Conduction Problems Solved by an Integral-Equation Approach

    Oberaigner, E., Leindl, M. & Antretter, T., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  103. 2009
  104. Published

    Cold and Warm Forming of Polycrystals: The Effect of Crystal Plasticity

    Rehrl, C., Kleber, S., Antretter, T. & Pippan, R., 2009,

    Macro- to Nano-scale Inelastic Behavior of Materials: Plasticity, Fatigue, & Fracture

    .     p. 319-321

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  105. Published

    Deformation, Stress State and Thermodynamic Force for a Growing Nano-Void in an Elastic-Plastic Material

    Fischer, F. D. & Antretter, T., 2009, In: International journal of plasticity. 25, p. 1819-1832

    Research output: Contribution to journal › Article › Research › peer-review

  106. Published

    Effect of Material Properties on the Thermo-Mechanical Loading and Damage of Pressure Casting Dies – A Numerical Study

    Ecker, W., Leindl, M., Antretter, T., Ebner, R., Siller, I. & Nisslé, S., 2009, Proceedings of the 8th International Tooling Conference. p. 927-939

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  107. Published

    Formation of Martensite Twins in Nano-Structured Nickel Titanium Alloys

    Antretter, T., Waitz, T., Pranger, W. & Fischer, F. D., 2009,

    Macro- to Nano-scale Inelastic Behavior of Materials: Plasticity, Fatigue & Fracture

    .     p. 361-363

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Previous 1 2 3 Next
View graph of relations

Contact

Phone: 4000

Latest Research Output

View more (236)