Department Physics, Mechanics and Electrical Engineering

Organisational unit: Departments and Institutes

701 - 800 out of 2,058Page size: 100

Research output

  1. 2015
  2. Published

    Versagen von feuerverzinkten Stahlbauteilen - Gefüge und Versagen von Werkstoffen

    Panzenböck, M., Mendez Martin, F., Rashkova, B., Schütz, P., Kaiser, R., Spiradek-Hahn, K. & Brabetz, M., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  3. Published

    Verzerrungsanalyse räumlich gekrümmter Flächen auf Basis konformer Abbildungsalgorithmen

    Ritt, R., 2015

    Research output: Thesis › Master's Thesis

  4. Published

    Voraussage von wachstumsfähigen Squats ausgehend von einer Fehlstelle im Randbereich der Fahrspur einer Schiene

    Kubin, W., 2015, 73 p.

    Research output: Thesis › Diploma Thesis

  5. Published

    Wirkungsgradoptimierung einer Hochstromladeschaltung einer Lithium-Ionen-Zelle

    Ziegerhofer, H., 2015

    Research output: Thesis › Master's Thesis

  6. 2014
  7. Published

    A customizable software for fast reduction and analysis of large X-ray scattering data sets: applications of the new DPDAK package to small-angle X-ray scattering and grazing-incidence small-angle X-ray scattering

    Benecke, G., Wagermaier, W., Li, C., Schwartzkopf, M., Flucke, G., Hoerth, R., Zizak, I., Burghammer, M., Metwalli, E., Müller-Buschbaum, P., Trebbin, M., Foerster, S., Paris, O., Roth, S. V. & Fratzl, P., Oct 2014, In: Journal of applied crystallography. 47, p. 1797-1803

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Modelling the role of compositional fluctuations in nucleation kinetics

    Ženíšek, J., Kozeschnik, E., Svoboda, J. & Fischer, F. D., 31 Jul 2014, In: Acta materialia. 91, p. 355-376

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Piezotronic Modification of Double-Schottky-Barriers in ZnO Varistor Ceramics

    Hofstätter, M., Raidl, N., Nevosad, A., Teichert, C. & Supancic, P., 16 Jun 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  10. Published

    Rolling Contact Fatigue of Three Crossing Nose Materials—Multiscale FE Approach

    Pletz, M., Daves, W., Yao, W. & Ossberger, H., 15 Jun 2014, In: Wear. 314, 1–2, p. 69-77 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Determination of Substitutional-Interstitial Interaction from Chemical Potentials of Interstitials in the Steel Matrix

    Shan, Y. V., Svoboda, J., Fischer, F. D. & Kozeschnik, E., May 2014, In: Advanced materials research. 922, p. 645-650

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    The role of phase interface energy in martensitic transformation: A lattice Monte-Carlo simulation

    Yastrebov, V. A., Fischlschweiger, M., Cailletaud, G. & Antretter, T., Mar 2014, In: Mechanics Research Communications. 56, p. 37-41

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Comparison of different methods for stress and deflection analysis in embedded die packages during the assembly process

    Macurova, K., Bermejo Moratinos, R., Pletz, M., Schöngrundner, R., Antretter, T., Krivec, T., Morianz, M., Brizoux, M. & Lecavelier, A., 1 Jan 2014, Proceedings - 2014 47th International Symposium on Microelectronics, IMAPS 2014. p. 355-360 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  14. Published

    73rd IUVSTA Workshop on "Nanostructures on two-dimensional solids"

    Teichert, C. (Editor), 2014, Eigenverlag.

    Research output: Book/Report › Anthology › Research

  15. Published

    Abnormal Grain Growth: A Non-Equilibrium Thermodynamic Model for Multi-Grain Binary Systems

    Svoboda, J. & Fischer, F. D., 2014, In: Modelling and simulation in materials science and engineering. 22, p. 015013-1-015013-15

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Accelerated cooling of heavy steel plates - selected aspects of modelling

    Kaltenbrunner, T., 2014

    Research output: Thesis › Diploma Thesis

  17. Published

    AFM Charakterisierung von LSC und LNO Proben

    Kreiml, P. & Teichert, C., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  18. Published

    AFM nanoindentation of pulp fibers and thin cellulose films at varying relative humidity

    Ganser, C., Hirn, U., Rohm, S., Schennach, R. & Teichert, C., 2014, In: Holzforschung : international journal of the biology, chemistry, physics and technology of wood . 68, p. 53-60

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    AFM studies of adsorbed xylan on amorphous cellulose films using functionalized tips

    Czibula, C., Ganser, C., Miletzky, A., Spirk, S., Schennach, R. & Teichert, C., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  20. Published

    Air-stable organic semiconductors based on 6,6'-dithienylindigo and polymers thereof

    Glowacki, E. D., Apaydin, D. H., Bozkurt, Z., Monkowius, U., Demirak, K., Tordin, E., Himmelsbach, M., Schwarzinger, C., Burian, M., Lechner, R. T., Demitri, N., Voss, G. & Sariciftci, N. S., 2014, In: Journal of materials chemistry / C. 2, p. 8089-8097

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    An Easy-to-Use Estimate of the Energy-Release Rate for Crack Arrays

    Fischer, F. D., Predan, J. & Kienzler, R., 2014, In: Archive of applied mechanics. 84, p. 1325-1337

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Application of the cyclic phase transformation concept for determining the effective austenite/ferrite interface mobility

    Gamsjäger, E., Chen, H. & van der Zwaag, S., 2014, In: Computational materials science. 83, p. 92-100

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Application of the page-equation on flat shaped viscose fibre handsheets

    Weber, F., Ganser, C., Teichert, C., Schennach, R., Bernt, I. & Eckhart, R., 2014, In: Cellulose. 21, p. 3715-3724

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Atomic Force Microscopy as a Tool to Explore Triboelectrostatic Phenomena in Mineral Processing

    Mirkowska, M., Kratzer, M., Teichert, C. & Flachberger, H., 2014, In: Chemie-Ingenieur-Technik. 86, p. 857-864

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Automated drop-on-fiber contact angle measurement using a microrobotic platform

    Saketi, P., Hirvonen, J., Ganser, C., Teichert, C., Lai, Y., Järnström, J., Fardim, P. & Kallio, P., 2014, In: Nordic pulp & paper research journal. 29, p. 225-231

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Balancing System for a 6-Cell-Lithium-Ion Battery Module Including Protection, Display, and Control Equipment

    Tian, Z., 2014, 106 p.

    Research output: Thesis › Master's Thesis

  27. Published

    Biased KPFM of two ZnO Varistors

    Kratzer, M. & Teichert, C., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  28. Published

    Biased KPFM of ZnO MLVs with/without galvanization

    Kratzer, M. & Teichert, C., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  29. Published

    Bioinspired composites – next generation of materials and devices

    Paris, O. & Zollfrank, C., 2014, In: Bioinspired, Biomimetic and Nanobiomaterials. 3, p. 121-122

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Characterization and modeling of the AuSnCu thin solder joint under thermal cycling

    Pélisset, T., Karunamurthy, B., Otremba, R. & Antretter, T., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  31. Published

    Characterization and modeling of the AuSnCu thin solder joint under thermal cycling

    Antretter, T., Otremba, R., Karunamurthy, B. & Pélisset, T., 2014, Proceedings of the 15th International Conference on Thermal, Mechanical & Multi-Physics Simulation and Experiments in Microelectronics and Microsystems EuroSimE 2014.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  32. Published

    Characterization and Modeling of the Thermomechanical Fatigue Behavior of Brake Disks for High Speed Trains

    Raninger, P., 2014

    Research output: Thesis › Doctoral Thesis

  33. Published

    Chemically Induced Fracturing in Alkali Feldspar

    Scheidl, K. S., Schaeffer, A.-K., Petrishcheva, E., Habler, G., Fischer, F. D., Schreuer, J. & Abart, R., 2014, In: Physics and Chemistry of Minerals. 41, p. 1-16

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Coherent Analysis of Disordered Mesoporous Adsorbents using Small Angle X-Ray Scattering and Physisorption Experiments

    Stoeckel, D., Wallacher, D., Zickler, G., Perlich, J., Tallarek, U. & Smarsly, B., 2014, In: Physical chemistry, chemical physics : PCCP. 16, p. 6583-6592

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Comparison of Flux Switching Permanent Magnet Machines with Hybrid Excitation

    Krenn, J., Krall, R. & Aschenbrenner, F., 2014, OPTIM 2014 Proceedings. p. 338-341

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    Comparison of Leakage Inductance between Fractional Slot Winding and Distributed Winding

    Krall, R., Krenn, J. & Schmid, A., 2014, PEMC 2014 Proceedings. p. 357-363

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. Published

    Comparison of Torque-Speed-Characteristic of Flux Switching Machines with Permanent Magnet Excitation and Hybrid Excitation

    Krenn, J., Krall, R. & Schmid, A., 2014, APEIE. p. 779-783

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  38. Published

    Computational simulation of instability phenomena in nanoparticles and nanofilms

    Todt, M., Toth, F., Hartmann, M., Holec, D., Cordill, M. J., Fischer, F. D. & Rammerstorfer, F. G., 2014, In: Computational Technology Reviews. 10, p. 89-119

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Correlative microscopy of PV conversion in nanostructures for solar cells

    Fejfar, A., Hývl, M., Vetushka, A., Ledinský, M., Kocka, J., Marek, A., Vyskocil, J., Misra, S., Yu, L., Foldyna, M., Roca i Cabarrocas, P., Becker, C., Itoh, T., Varlamov, S., Kratzer, M. & Teichert, C., 2014, In Technical Digest of the 6th World Conference on Photovoltaic Solar Energy Conversion, 23 - 27. 11. 2014, Kyoto, Japan, 2014. http://www.wcpec6.com/.. p. 1-2

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. Published

    Critical assessment of the determination of residual stress profiles in thin films by means of the ion beam layer removal method

    Schöngrundner, R., Treml, R., Antretter, T., Kozic, D., Ecker, W. & Kiener, D., 2014, In: Thin solid films. p. 321-330

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Crystal Phase Transitions in the Shell of PbS/CdS Core/Shell Nanocrystals Influences Photoluminescence Intensity

    Lechner, R. T., Popovski, G., Yarema, M., Heiss, W., Armin, H., Schülli, T., Primetzhofer, D., Eibelhuber, M. & Paris, O., 2014, In: Chemistry of materials. 26, p. 5914-5922

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Design and experimental verification of a third harmonic injection rectifier circuit using a Flying converter cell

    Hartmann, M., Fehringer, R., Makoschitz, M. & Ertl, H., 2014, APEC 2014 - 29th Annual IEEE Applied Power Electronics Conference and Exposition. Institute of Electrical and Electronics Engineers, p. 920-927 8 p. 6803418. (Conference Proceedings - IEEE Applied Power Electronics Conference and Exposition - APEC).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  43. Published

    Determination of cyclic mechanical properties of thin copper layers for PCB applications

    Fellner, K., Fuchs, P. F., Antretter, T., Pinter, G. & Schöngrundner, R., 2014, Proceedings 15th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  44. Published

    Determination of Depths of Multiple Traps for Interstitials and their Influence on Diffusion Kinetics

    Svoboda, J., Shan, Y. V., Kozeschnik, E. & Fischer, F. D., 2014, In: Modelling and simulation in materials science and engineering. 22, p. 065015-1-16

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Determination of Mechanical Properties of Carbon Nanostructures using Computational Mechanical Tests

    Hartmann, M., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  46. Published

    Diffusion of elements and vacancies in multi-component systems

    Fischer, F. D. & Svoboda, J., 2014, In: Progress in materials science. 60, p. 338-367

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Distributed Bragg Reflectors: Morphology of Cellulose Acetate and Polystyrene Multilayers

    Unger, K., Czibula, C., Resel, R., Ganser, C. & Teichert, C., 2014, PROCEEDING. p. 1-4

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  48. Published

    Estimation of Thermodynamic Data of Metallic Nanoparticles Based on Bulk Values

    Vollath, D. & Fischer, F. D., 2014, Metal Nanopowders: Production, Characterization, and Energetic Applications. p. 1-24

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  49. Published

    Evaluation of the residual stress distribution in thin films by means of the ion beam layer removal method

    Kozic, D., Treml, R., Schöngrundner, R., Brunner, R., Kiener, D., Antretter, T. & Gänser, H.-P., 2014, Proceedings of the 15th International Conference on Thermal, Mechanical & Multi-Physics Simulation and Experiments in Microelectronics and Microsystems EuroSimE 2014. Zhang, G. Q., Van Driel, W. D., Rodgers, P., Bailey, C. & de Saint Leger, O. (eds.). Institute of Electrical and Electronics Engineers, 6813785

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  50. Published

    Ex situ and In situ Characterization of Patterned Photoreactive Thin Organic Surface Layers Using Friction Force Microscopy

    Shen, Q., Edler, M., Grießer, T., Knall, A.-C., Trimmel, G., Kern, W. & Teichert, C., 2014, In: Scanning. 36, p. 590-598

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    FE - simulation of chip formation in inhomogeneous materials

    Distlberger, S., 2014, 144 p.

    Research output: Thesis › Diploma Thesis

  52. Published

    Formation of Bubbles by Hydrogen Attack and Elastic-Plastic Deformation of the Matrix

    Fischer, F. D. & Svoboda, J., 2014, In: International journal of plasticity. 63, p. 110-123

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    Fractional Slot Winding versus Distributed Winding using Winding Function Method

    Krall, R., Krenn, J. & Schmid, A., 2014, Optimization of Electrical and Electronic Equipment (OPTIM), 2014 14th International Conference on. p. 437-444

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  54. Published

    Generalization of the Lifshitz–Slyozov–Wagner Coarsening Theory to Non-dilute Multi-component Systems

    Svoboda, J. & Fischer, F. D., 2014, In: Acta materialia. 79, p. 304-314

    Research output: Contribution to journal › Article › Research › peer-review

  55. Published

    Growth limit of carbon onions – A continuum mechanical study

    Todt, M., Bitsche, R. D., Hartmann, M., Fischer, F. D. & Rammerstorfer, F. G., 2014, In: International journal of solids and structures. 51, p. 706-715

    Research output: Contribution to journal › Article › Research › peer-review

  56. Published

    High-Performance Lawn-Mower Prototype with Re-Used Lithium Ion Phosphate Battery

    Weiß, H., Schopf, K. & Zarkar, M., 2014, APEIE Proceedings. p. 785-788

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  57. Published

    Humidity-driven deformation of ordered mesoporous silica films

    Sharifi Rajabi, P., Marmiroli, B., Sartori, B., Cacho-Nerin, F., Keckes, J., Amenitsch, H. & Paris, O., 2014, In: Bioinspired, Biomimetic and Nanobiomaterials. 3, p. 183-190

    Research output: Contribution to journal › Article › Research › peer-review

  58. Published

    Imaging of the formerly bonded area of individual fibre to fibre joints with SEM and AFM

    Fischer, W., Zankel, A., Ganser, C., Schmied, F., Schröttner, H., Hirn, U., Teichert, C., Bauer, W. & Schennach, R., 2014, In: Cellulose. 21, p. 251-260

    Research output: Contribution to journal › Article › Research › peer-review

  59. Published

    Influence of sacrificial bonds on the mechanical behaviour of polymer chains

    Nabavi, S., Harrington, M. J., Fratzl, P. & Hartmann, M., 2014, In: Bioinspired, Biomimetic and Nanobiomaterials. 3, p. 139-145

    Research output: Contribution to journal › Article › Research › peer-review

  60. Published

    Influence of water on mechanical properties of cellulosic materials studied by AFM based methods

    Ganser, C., 2014

    Research output: Thesis › Doctoral Thesis

  61. Published

    In-Situ SAXS study on the ion dynamics in microporous carbon based supercapacitors

    Prehal, C., 2014, 115 p.

    Research output: Thesis › Diploma Thesis

  62. Published

    Insular Power Supply Battery Manager with Balancing and Protection Unit for Lithium-Ion Batteries

    Weiß, H. & Volgger, S., 2014, APEIE Proceedings. p. 789-792

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  63. Published

    Inverted bulk-heterojunction solar cell with cross-linked hole-blocking layer

    Udum, Y., Denk, P., Adam, G., Apaydin, D. H., Nevosad, A., Teichert, C., White, M. S., Sariciftci, N. S. & Scharber, M. C., 2014, In: Organic electronics. 15, p. 997-1001

    Research output: Contribution to journal › Article › Research › peer-review

  64. Published

    Inverted bulk-heterojunction solar cell with cross-linked hole-blocking layer

    Nevosad, A. & Teichert, C., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  65. Published

    Island shape anisotropy in organic thin film growth induced by ion-beam irradiated rippled surfaces

    Kratzer, M., Wrana, D., Szajna, K., Krok, F. & Teichert, C., 2014, In: Physical chemistry, chemical physics : PCCP. 16, 47, p. 26112-26118

    Research output: Contribution to journal › Article › Research › peer-review

  66. Published

    Kinetics of the Austenite-to-Ferrite Phase Transformation - Simulations and Experiments

    Gamsjäger, E., Werner, R., Schiller, W. & Buchmayr, B., 2014, In: Steel research international. p. 131-142

    Research output: Contribution to journal › Article › Research › peer-review

  67. Published

    Layer Dependent Wetting in Parahexaphenyl Thin Film Growth on Graphene

    Kratzer, M., Klima, S., Teichert, C., Vasić, B., Matković, A., Milicevic, M. & Gajić, R., 2014, In: E-Journal of Surface Science and Nanotechnology. 12, p. 31-39

    Research output: Contribution to journal › Article › Research › peer-review

  68. Published

    Magnetic-field-induced ferroelectric polarization reversal in the multiferroic Ge1-xMnxTe semiconductor

    Przybylinska, H., Springholz, G., Lechner, R. T., Hassan, M., Wegscheider, M., Jantsch, W. & Bauer, G., 2014, In: Physical review letters. 12, p. 047202-1- 047202-6

    Research output: Contribution to journal › Article › Research › peer-review

  69. Published

    Magnetic force imaging of a chain of biogenic magnetite and Monte Carlo analysis of tip-particle interaction

    Körnig, A., Hartmann, M., Teichert, C., Fratzl, P. & Damien, F., 2014, In: Journal of physics / D, Applied physics. 47, p. 235403-1-235403-9

    Research output: Contribution to journal › Article › Research › peer-review

  70. Published

    Mechanik und Thermodynamik der Werkstoffe

    Gamsjäger, E., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  71. Published

    Mechanisms of topography formation of magnetron-sputtered chromium-based coatings on epoxy polymer composites

    Lackner, J. M., Waldhauser, W., Ganser, C., Teichert, C., Kot, M. & Major, L., 2014, In: Surface & coatings technology. 241, p. 80-85

    Research output: Contribution to journal › Article › Research › peer-review

  72. Published

    Method development for the cyclic characterization of thin copper layers for PCB applications

    Fellner, K., Fuchs, P. F., Pinter, G., Antretter, T. & Krivec, T., 2014, In: Circuit World. 40, p. 53-60

    Research output: Contribution to journal › Article › Research › peer-review

  73. Published

    Micro four-point probe investigation of individual ZnO grain boundaries in avaristor ceramic

    Nevosad, A., Hofstätter, M., Supancic, P., Danzer, R. & Teichert, C., 2014, In: Journal of the European Ceramic Society. 34, p. 1963-1970

    Research output: Contribution to journal › Article › Research › peer-review

  74. Published

    Modeling the Accelerated Cooling Process in Heavy Steel Plate Production

    Essl, W., 2014

    Research output: Thesis › Doctoral Thesis

  75. Published

    Modelling of phase transformations and residual stress formation in hot-work tool steel components

    Schemmel, M., Prevedel, P., Schöngrundner, R., Ecker, W. & Antretter, T., 2014, European Conference of Heat Treatment and 21st IFHTSE Congress. p. 285-292

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  76. Published

    Modelling of thin film buckling in compound specimens under uniaxial stretching

    Toth, F., Rammerstorfer, F. G., Cordill, M. J. & Fischer, F. D., 2014, Shell Structures: Theory and Applications - Proceedings of the 10th SSTA 2013 Conference. p. 247-250 4 p. (Shell Structures: Theory and Applications - Proceedings of the 10th SSTA 2013 Conference; vol. 3).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  77. Published

    Numerical analysis of a multivariant martensitic phase transformation in nanostructured NiTi considering elastic anisotropy

    Petersmann, M., 2014

    Research output: Thesis › Diploma Thesis

  78. Published

    Numerical analysis of the rock cutting and the loading of rock cutting tools

    Mikl-Resch, M. J., 2014

    Research output: Thesis › Doctoral Thesis

  79. Published

    Observation of elastic modulus inhomogeneities in thermosetting epoxies using AFM e Discerning facts and artifacts

    Haba, D., Kaufmann, J., Brunner, A. J., Resch, K. & Teichert, C., 2014, In: Polymer. 55, p. 4032-4040

    Research output: Contribution to journal › Article › Research › peer-review

  80. Published

    On Energy Optimization of Sucker Rod Pumping System

    Carneiro Bastos, I., 2014, 198 p.

    Research output: Thesis › Doctoral Thesis

  81. Published

    Ordered Mesoporous Thin Films; Elastic Modulus Determination by Humidity Driven Pore Lattice Deformation

    Sharifi Rajabi, P., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  82. Published

    Phase transformations in steels - from in-situ experiments to thermodynamically based models

    Gamsjäger, E., 2014, Proceedings of the 8th European continuous casting conference. p. 116-123

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  83. Published

    Photovoltaik-Laderegler und Balancer zum Einsatz von Lithium-Ionen-Hochenergiezellen

    Volgger, S., 2014

    Research output: Thesis › Master's Thesis

  84. Published

    Piezoelectric Response of Cadmium Sulfide Nanorod Crystals Grown from Gas Phase by Using Ag and Au Catalyst

    Kratzer, M., 2014, PROCEEDINGS OF THE INTERNATIONAL CONFERENCE on NANOMATERIALS : APPLICATIONS AND P ROPERTIES. p. 02NEA07-1-02NEA07-3

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  85. Published

    Pilgerwalzwerk: Einblicke in den Walzprozess durch die Anwendung der Finite Elemente Methode

    Ragger, K., Kaiser, R., Paal, J., Fluch, R. & Buchmayr, B., 2014, In: Kalibreur. p. 28-41

    Research output: Contribution to journal › Article › Research › peer-review

  86. Published

    Pore characteristics and mechanical properties of silica templated by wood

    Fritz-Popovski, G., Morak, R., Schöberl, T., Van Opdenbosch, D., Zollfrank, C. & Paris, O., 2014, In: Bioinspired, Biomimetic and Nanobiomaterials. 3, p. 160-168

    Research output: Contribution to journal › Article › Research › peer-review

  87. Published

    Reversible Cross-links in Polymer Chains The influence of sacrificial bonds on the mechanical behavior of polymeric system investigated using Monte Carlo simulations

    Nabavi, S., 2014

    Research output: Thesis › Doctoral Thesis

  88. Published

    Roughness analysis von polymerbeschichteten Edelstahlproben2014

    Genser, J., Kratzer, M., Ganser, C. & Teichert, C., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  89. Published

    Shape of Picoliter Droplets on Chemically Striped Patterned Substrates

    Jansen, H. P., Sotthewes, K., Ganser, C., Zandvliet, H. J. W., Teichert, C. & Kooij, S., 2014, In: Langmuir. 30, p. 11574-11581

    Research output: Contribution to journal › Article › Research › peer-review

  90. Published

    Shape retrieval of inorganic nanocrystals from SAXS-data

    Burian, M., 2014, 77 p.

    Research output: Thesis › Diploma Thesis

  91. Published

    Simulation of stress distribution in assembled silicon dies and deflection of printed circuit boards

    Macurova, K., Angerer, P., Antretter, T., Bermejo Moratinos, R., Maia, W., Schöngrundner, R., Krivec, T., Morianz, M. & Brizoux, M., 2014, Proceedings of the 15th International Conference on Thermal, Mechanical & Multi-Physics Simulation and Experiments in Microelectronics and Microsystems EuroSimE 2014.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  92. Published

    Simulation of the roller straightening process with respect to residual stresses and the curvature trend

    Kaiser, R., Hatzenbichler, T., Buchmayr, B. & Antretter, T., 2014, International Conference on Residual Stresses 9 (ICRS 9). p. 456-463

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  93. Published

    Studying interaction between mineral particles by atomic force spectroscopy

    Klima, S., Mirkowska, M., Kratzer, M., Flachberger, H., Teichert, C. & Pondicherry, K., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  94. Published

    Test Bench for a High Performance PSM Drive System for a Nautical Application

    Schmid, A., Aschenbrenner, F., Kaserer, G. & Prenner, M., 2014, APEIE. p. 775-778

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  95. Published

    The Influence of Chemistry on the Kirkendall Effect during Grain Boundary Interdiffusion

    Svoboda, J., Fischer, F. D., Klinger, L. & Rabkin, E., 2014, In: Philosophical magazine. 94, p. 3398-3412

    Research output: Contribution to journal › Article › Research › peer-review

  96. Published

    Thermodynamic Extremal Principles for Irreversible Processes in Materials Science

    Fischer, F. D., Svoboda, J. & Petryk, H., 2014, In: Acta materialia. 67, p. 1-20

    Research output: Contribution to journal › Article › Research › peer-review

  97. Published

    The role of topology and thermal backbone fluctuations on sacrificial bond efficacy in mechanical metalloproteins

    Nabavi, S., Harrington, M. J., Paris, O., Fratzl, P. & Hartmann, M., 2014, In: New journal of physics. 16, p. 013003-1-013003-13

    Research output: Contribution to journal › Article › Research › peer-review

  98. Published

    The structural evolution of multi-layer graphene stacks in carbon fibers under load at high temperature – A synchrotron radiation study

    Rennhofer, H., Puchegger, S., Pabisch, S., Rentenberger, C., Li, C., Siegel, S., Steiger-Thirsfeld, A., Paris, O. & Peterlik, H., 2014, In: Carbon. 80, p. 373-381

    Research output: Contribution to journal › Article › Research › peer-review

  99. Published

    Thin cellulose films as a model system for paper fibre bonds

    Rohm, S., Hirn, U., Ganser, C., Teichert, C. & Schennach, R., 2014, In: Cellulose. 21, p. 237-249

    Research output: Contribution to journal › Article › Research › peer-review

  100. Published

    Transport and Photoelectric Effects in Structures with Ge and SiGe Nanoclusters Grown on Oxidized Si (001)

    Lysenko, V. S., Gomeniuk, Y. V., Kondratenko, S. V., Melnichuk, Y. Y., Kozyrev, Y. N. & Teichert, C., 2014, Advanced Materials Research: 7th International Workshop on Functional Nanomaterials and Devices. Vol. 854. p. 11-19 (Advanced Materials Research; vol. 854).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  101. Published

    Two-Dimensional Simulation of Reactive Diffusion in Binary Systems

    Svoboda, J., Stopka, J. & Fischer, F. D., 2014, In: Computational materials science. 95, p. 309-315

    Research output: Contribution to journal › Article › Research › peer-review

  102. Published

    Zwei-Jahresbericht 2012/13

    Meisels, R., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

Previous 1...4 5 6 7 8 9 10 11 ...21 Next
View graph of relations