Department Mineral Resources Engineering

Organisational unit: Departments and Institutes

1301 - 1400 out of 3,520Page size: 100

Research output

  1. 2017
  2. Published

    Der Einsatz unbemannter Flugsysteme zur Charakterisierung von gesprengtem Haufwerk

    Tscharf, A., Mayer, G., Mostegel, C., Fraundorfer, F., Gaich, A. & Bischof, H., 2017, Schriftenreihe des Instituts für Markscheidewesen und Geodäsie an der TU Bergakademie Freiberg. Benndorf, J. (ed.). Freiberg, Vol. 2017-1. p. 132 - 145

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. Published

    Einsatz von Spezialsiebmaschinen im Recycling - Praxisbeispiele

    Lang, P. & Baier, C., 2017, Recycling und Rohstoffe. Neuruppin, Vol. 10. p. 455 - 471 16 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  4. Published

    Emergence of Differential Social License: A Case of Impact and Benefit Agreements in Nunavut, Canada

    Hitch, M., Tost, M., Moser, P. & Feiel, S., 2017, Proceedings of the 8th International Conference on Sustainable Development in the Minerals Industry.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  5. Published

    Evaluierung von 3D-BIM-Software für den Tunnelbau

    Löffler, M., 2017

    Research output: Thesis › Master's Thesis

  6. Published

    Excavation

    Galler, R., 2017, Rock Mechanics and Engineering. London, Vol. Volume 4. p. 3-50 48 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  7. Published

    Experimental Study on Microwave Assisted Hard Rock Cutting of Granite

    Hartlieb, P. & Grafe, B., 2017, In: Berg- und hüttenmännische Monatshefte : BHM. 162, 2, p. 77-81

    Research output: Contribution to journal › Article › Research

  8. Published

    Experimentelle und numerische Untersuchungen von einaxialen Druckversuchen und Biegezugversuchen

    Bogdanic, D., 2017

    Research output: Thesis › Master's Thesis

  9. Published

    Feasibility Study of Aynak Copper Deposit-Technology Planning

    SHADAB, S. Z., 2017

    Research output: Thesis › Master's Thesis

  10. Published

    FFG-Zwischenbericht des zweiten Forschungsjahres: BUBLITE, Entwicklung eines Blähschachtes zur Expansion vulkanischer Eruptivgesteine im Korngrößenbereich von < 100 μm

    Weingrill, G., 2017

    Research output: Book/Report › Commissioned report › Transfer

  11. Published

    Fracture investigation of refractories under combined mode I and mode II loading

    Zhou, R., 2017

    Research output: Thesis › Master's Thesis

  12. Published

    Fracturing Mechanisms in Granite when Exposed to Different Modes of Microwave Irradiation

    Akbari, B., 2017

    Research output: Thesis › Master's Thesis

  13. Published

    Gebirgsverhaltenstypen als Grundlage einer Ausschreibung und Kalkulation - Chancen und Probleme

    Tesch, M., 2017

    Research output: Thesis › Master's Thesis

  14. Published

    Geotechnische Beurteilung eines untertägigen Bergbaues

    Schinagl, S. & Moser, A., 2017, In: Berg- und hüttenmännische Monatshefte : BHM. 162, 6

    Research output: Contribution to journal › Article › Research

  15. Published

    Geotechnische Charakterisierung des Reviers 6 des Magnesitbergbaus Breitenau

    Schinagl, S., 2017

    Research output: Thesis › Master's Thesis

  16. Published

    Glück auf, Bergleut! Der Lavanttaler Kohlenbergbau

    Sifferlinger, N. A. & Ragger, C., 2017, Edition Museum im Lavanthaus ed. Wolfsberg. 104 p.

    Research output: Book/Report › Book › Research

  17. Published

    Historische Einflüsse auf das Systemverhalten bei der Instandsetzung von Mauerwerkstunnel

    Klausecker, S., 2017

    Research output: Thesis › Master's Thesis

  18. Published

    Inbetriebnahme der Schwingsetzmaschine SK 3-10 von Siebtechnik mit primärem sowie sekundärem Aufgabegut am Lehrstuhl für Aufbereitung und Veredlung

    Strzalkowski, J., 2017

    Research output: Thesis › Master's Thesis

  19. Published

    Influence of compounding technology on rheological, thermal and mechanical behavior of blast furnace slag filled polystyrene compounds

    Mostafa, A., Pacher, G. A., Lucyshyn, T., Holzer, C., Flachberger, H., Krischey, E., Fritz, B. & Laske, S., 2017, In: AIP Conference Proceedings. 1914.2017, 1, 6 p., 150003.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    In situ Untersuchung der ersten Schmelzphasenbildung von infiltrierten Feuerfestprodukten mittels Hochtemperatur- Konfokalmikroskopie

    Riedler, S., 2017

    Research output: Thesis › Master's Thesis

  21. Published

    Investigating the reduction of cutting resistance of granite specimen induced by microwave irradiation with varying irradiation times

    MALOVYK, A., 2017

    Research output: Thesis › Master's Thesis

  22. Published

    Key issues in the rock mechanical design of support pillar systems

    Ladinig, T., 2017, VIII International Research and Practice Conference “Innovations in Mining Enterprise Engineering: Geomechanical Tools in Planning, Design and Mining Operations”.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  23. Published

    Longterm stability of tunnels - Tests and results

    Galler, R. & Lorenz, S., 2017, Proceedings of the IV International Conference on Computational Methods in Tunneling and Subsurface Engineering: EURO:TUN 2017. Innsbruck, p. 25-30 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. Published

    Main wear mechanisms of SEN slag band materials

    Harmuth, H., Kircher, V. & Kölbl, N., 2017, In: China's refractories. 26.2017, 1, p. 1-7 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Measurement and simulation of refractory creep and fracture

    Jin, S., 2017

    Research output: Thesis › Habilitation thesis › peer-review

  26. Published

    Messung der Umweltbedingungen im Tunnelbau

    Müller, C., 2017

    Research output: Thesis › Master's Thesis

  27. Published

    Monitoring and Electrolytic Removal of Nickel from Bismuth and the Lead-bismuth Eutectic

    Zaunrith, G. A., 2017

    Research output: Thesis › Master's Thesis

  28. Published

    Neuausrichtung des Brech- und Förderablaufes im Steinbruch Bad Häring

    Male, F., 2017

    Research output: Thesis › Master's Thesis

  29. Published

    Newton Force Monitoring and Numerical Simulation Analysis of "Landslide 2016-1101" in NanFen Open-pit Iron Mine

    ZHAO, S., 2017

    Research output: Thesis › Master's Thesis

  30. Published

    Numerical analysis of the rock cutting process based on a two-parameter description of tensile strength

    Pittino, G., Galler, R., Antretter, T., Mikl-Resch, M. J., Tichy, R., Ecker, W., Gimpel, M. & Kargl, H., 2017, Proceedings of 13th ISRM International Congress of Rock Mechanics 2015. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  31. Published

    Numerical simulation of stress-free shotcrete installation in the underground structures using finite element program ABAQUS

    Darmaev, E., Galler, R. & Antretter, T., 2017, Proceedings of the IV International Conference on Computational Methods in Tunneling and Subsurface Engineering: EURO:TUN 2017. Innsbruck, p. 339-346 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  32. Published

    Numerical study of the influence of irradiation parameters on the microwave-induced stresses in granite

    Toifl, M., Hartlieb, P., Meisels, R., Antretter, T. & Kuchar, F., 2017, In: Minerals engineering. 103-104.2017, April, p. 78-92 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    On the physical properties of volcanic rock masses (Invited)

    Heap, M. J., Got, J.-L., Ball, J. & Villeneuve, M., 2017.

    Research output: Contribution to conference › Abstract

  34. Published

    Optimierung des Versorgungskonzeptes für den Innenausbau eines langen Eisenbahntunnels

    Kreiner, M., 2017

    Research output: Thesis › Master's Thesis

  35. Published

    Optimisation of the dewatering line of the soil washing plant Ground Unit

    Steinecker, L., 2017

    Research output: Thesis › Master's Thesis

  36. Published

    Optimization of a leaching process for copper-bearing materials by means of biotechnologically produced leaching agents such as acetic acid, citric acid ammonium and (poly) glutamic acid

    PANKOV, F., 2017

    Research output: Thesis › Master's Thesis

  37. Published

    Percentile Fragment Size Predictions for Blasted Rock and the Fragmentation–Energy Fan

    Ouchterlony, F., Sanchidrián, J. A. & Moser, P., 2017, In: Rock mechanics and rock engineering. 50.2017, 4, p. 751-779 29 p.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Petrographic coded model concept for the correlation between geomechanical and elastic properties and its application on log data for Alpine rocks

    Gegenhuber, N., Schifko, T. & Pittino, G., 2017, In: Austrian journal of earth sciences. 110.2017, 1, p. 101-108 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Phase formation in Al2O3-C refractories with Al addition

    Atzenhofer, C., Gschiel, S. & Harmuth, H., 2017, In: Journal of the European Ceramic Society. 37.2017, 4, p. 1805-1810 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Possibilities of utilizing cutting force analysis for sensing different lithologies during mechanical excavation

    RIMOS, P., 2017

    Research output: Thesis › Master's Thesis

  41. Published

    Process zone in refractory ceramics

    Dai, Y., 2017

    Research output: Thesis › Doctoral Thesis

  42. Published

    Reaction of Rhyolitic Magma to its Interception by the IDDP-1 Well, Krafla, 2009

    Saubin, E., Nichols, A. R. L., Kærgaard Mortensen, A., Kennedy, B. M., Schipper, I., Tuffen, H., Cole, J. W., Villeneuve, M., Zierenberg, R. A. & Watson, T., 2017.

    Research output: Contribution to conference › Abstract

  43. Published

    Schwimm/Sink-Analyse einer Probe vom Kohlelagerunterbau

    Öfner, W., 2017, 4 p.

    Research output: Book/Report › Commissioned report › Transfer

  44. Published

    “Sink or float” - Density separation of post- consumer plastics for feedstock recycling

    Bauer, M., Lehner, M., Schwabl, D., Flachberger, H., Kranzinger, L. J., Pomberger, R. & Hofer, W., 2017, Book of Abstracts: 9th international Symposium on Feedstock Recycling of Polymeric Materials, July 10th - 13th, 2017 at VSB-Technical University of Ostrava, Ostrava, Czech Republic. Ostrava, p. 19-21

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  45. Published

    Sofort- und Sanierungsmaßnahmen in einem Straßentunnel nach einem Brandfall

    Reichard, R., 2017

    Research output: Thesis › Master's Thesis

  46. Published

    Studies on the effect of high power microwave irradiation as a means of inducing damage to very hard rock to reduce the cutting resistance during mechanical excavation

    Grafe, B., Shepel, T., Drebenstedt, C. & Hartlieb, P., 2017, Proceedings of the 26th International Symposium on Mine Planning and Equipment Selection. Ghodrati, B., Kumar, U. & Schunesson, H. (eds.). Lulea

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    Systematische aufbereitungstechnische Bewertung ausgesuchter Einsatzstoffe der Montanwerke Brixlegg AG

    Wrienz, M., 2017

    Research output: Thesis › Master's Thesis

  48. Published

    Systematische Kalzinierungsversuche an feinkörnigen Industriemineralen mit den elektrisch indirekt beheizten Wärmestrahlungsöfen der Firma Bublon GmbH

    Ehrenberger, M., 2017

    Research output: Thesis › Master's Thesis

  49. Published

    Systematische Untersuchungen zur trockenen Aufbereitung an zwei Rohtalken mittels Elektroscheidung

    Gehringer, S., 2017

    Research output: Thesis › Master's Thesis

  50. Published

    Tastversuche zur Trennung von Karbid und Korund

    Öfner, W., 2017, 7 p.

    Research output: Book/Report › Commissioned report › Transfer

  51. Published

    Testing of clustering algorithms on different 3D seismic models

    Amtmann, J., Eichkitz, C. G., Schreilechner, M. G., Hofer, D., Gegenhuber, N. & Jud, M. F., 2017, 79th EAGE Conference and Exhibition 2017. (79th EAGE Conference and Exhibition 2017).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  52. Published

    The importance of research on alternative and hybrid rock extraction methods

    Sifferlinger, N. A., Hartlieb, P. & Moser, P., 2017, In: Berg- und hüttenmännische Monatshefte : BHM. 162, 2, p. 58-66

    Research output: Contribution to journal › Article › Research

  53. Published

    Theoretical investigations on the influence of artificially induced joints on the performance of mechanical rock excavation by roadheaders

    Bock, S., 2017

    Research output: Thesis › Master's Thesis

  54. Published

    Towards industrial vessel refractories lining design: a case study

    Jin, S., Harmuth, H. & Gruber, D., 2017.

    Research output: Contribution to conference › Paper

  55. Published

    Tunnelbau für die Zukunft: Editorial

    Galler, R., 2017, In: Bauingenieur. 92.2017, 4, 1 p.

    Research output: Contribution to journal › Editorial › peer-review

  56. Published

    Überlegungen zur Sicherung von Personen und Infrastrukturbauwerken gegen Steinschlag im alpinen Bereich unter besonderer Berücksichtigung flexibler Steinschlagschutzsysteme - Modellierung flexibler Steinschlagschutzsysteme im Labormaßstab zur Beurteilung nichtgenormter Lastfälle

    Heiss, C., 2017

    Research output: Thesis › Doctoral Thesis

  57. Published

    Untersuchung des Schmelz-, Lösungs- und Kristallisationsverhaltens oxidisch-silikatischer Systeme mittels HT-LSCM

    Kircher, V., 2017

    Research output: Thesis › Doctoral Thesis

  58. Published

    Untersuchungen zum Bruchverhalten feuerfester Baustoffe mit einem Mini Keilspaltversuch

    Pressler, M., 2017

    Research output: Thesis › Master's Thesis

  59. Published

    Untersuchungen zur Frage des Verhaltens von Gesteinsproben bei Druckbeanspruchung unter Bedingungen eingeschränkter Querverformung

    Nurschinger, F., 2017

    Research output: Thesis › Master's Thesis

  60. Published

    Using Cameras in TBM Cutterheads for Geological Documentation of the Tunnel Face

    Wenighofer, R., Galler, R., Six, G. & Chmelina, K., 2017, p. 1507-1512. 6 p.

    Research output: Contribution to conference › Paper › peer-review

  61. Published

    Verformungsmonitoring in einem TVM-Vortrieb mittels 3D-Laserscanning

    Wenighofer, R., Chmelina, K. & Galler, R., 2017, Ingenieurvermessung 17: Beiträge zum 18. Internationalen Ingenieurvermessungskurs Graz, 2017. Lienhart, W. (ed.). p. 101-111 11 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  62. Published

    Vergleich der Innenschalendicken-Bestimmung am Baulos KAT2 mittels Laserscanner und Ultraschall Echo Verfahren

    Pölzl, M., 2017

    Research output: Thesis › Master's Thesis

  63. Published

    Vorwort

    Galler, R., 2017, In: Berg- und hüttenmännische Monatshefte : BHM. 162.2017, 12, p. 531 1 p.

    Research output: Contribution to journal › Editorial

  64. Published

    xP-frag: a new model to predict fragmentation from blasting

    Sanchidrián, J. A. & Ouchterlony, F., 2017, APS Blasting 5; New development on engineerign blasting: Proc 5th Asia-Pacific Symposium on Blasting Techniques . Wang, X. (ed.). Beijing, China, p. 31-36 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  65. 2016
  66. Published

    Potentiale und Herausforderungen der UAV-Vermessung im Bergbau – Stand der Forschung und Ausblick

    Tscharf, A., Mayer, G., Rumpler, M., Fraundorfer, F. & Bischof, H., Dec 2016, In: Markscheidewesen, Das. 123.2016, 2-3, p. 33-40 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  67. Published

    Assessment of the BOF-Slag separability

    Kamali Moaveni, A. & Böhm, A., 30 Nov 2016, p. 174-183. 10 p.

    Research output: Contribution to conference › Paper

  68. Published

    Entwicklung neuer Messtechnologien für maschinelle Vortriebe

    Wenighofer, R., Gehwolf, P., Six, G. & Galler, R., 30 Nov 2016, In: Tunnel. 2016, 8, p. 20 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  69. Published

    Halides - Associated problems during the primary zinc production process

    Benigni, C., Patscheider, S., Pichler, C. & Antrekowitsch, J., 30 Nov 2016, OPMR - Opportunities in processing of metal resources in South East Europe: Proceedings. p. 149-154 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  70. Published

    Erfassung von Tübbingverformungen bei TVM-Vortrieben

    Wenighofer, R., Galler, R. & Chmelina, K., 28 Nov 2016, Terrestrisches Laserscanning 2016 (TLS 2016): Beiträge zum 154. DVW-Seminar am 28. und 29. November 2016 Fulda. DVW e.V. (ed.). 1 ed. Augsburg, Vol. 85/2016. p. 59 74 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  71. Published

    Erfassung von Tübbingverformungen bei TVM-Vortrieben

    Wenighofer, R., 28 Nov 2016.

    Research output: Contribution to conference › Presentation › Research

  72. Published

    Numerische Betrachtung des Einflusses von Regenereignissen auf die Stabilität von Böschungen

    Stoxreiter, T. & Schuller, E., 17 Nov 2016.

    Research output: Contribution to conference › Presentation › Research

  73. Published

    Numerische Untersuchungen des Einflusses von Regenereignissen auf die Standsicherheit von Böschungen

    Sachs, G., Schuller, E. & Stoxreiter, T., 11 Nov 2016, In: Berg- und hüttenmännische Monatshefte : BHM.

    Research output: Contribution to journal › Article › Research

  74. Published

    High-precision sensors for detecing a mechanical load of a mining tool of a tunnel boring machine

    Barwart, S. (Inventor) & Galler, R. (Inventor), 10 Nov 2016, IPC No. E21D 9/ 00 A I, Patent No. AU2015243595, Priority date 2 Apr 2015, Priority No. WO2015EP57361

    Research output: Patent

  75. Published

    Min.Guide Projekt: Horizon 2020

    Tost, M., 2 Nov 2016, In: Stein & Kies (Mitgliederzeitung - Forum mineralische Rohstoffe). 145, Nov-Dez 2016, p. 11 1 p.

    Research output: Contribution to journal › Article › Transfer

  76. Published

    Quo vadis Kunststoffrecycling - Bestandsaufnahme der polyolefinen Kunststoffe in der österreichischen Abfallwirtschaft

    Kranzinger, L., Pomberger, R., Schwabl, D. & Bauer, M., Nov 2016, Recy & DepoTech 2016, Tagungsband der 13. Recy & DepoTech-Konferenz. 1 ed. Leoben, Vol. 13. p. 583 - 588 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  77. Published

    Influence of testing methods on the determination of the aging behaviour of shales

    Hohl, W., Hujer, W., Persaud, M., Germay, C., Lhomme, T. & Finkbeiner, T., 26 Oct 2016, Proceedings EAGE/SPE Workshop on Integrated Geomechanics in E&P: Manage & Improve Asset Performance using Geomechanics.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  78. Published

    Bericht über den Zwischenstand der Untersuchungen bezüglich des geplanten untertägigen Abbaus am Standort Gummern der Firma Omya GmbH. Teilbericht 2

    Wagner, H., Blaha, H. & Ladinig, T., 21 Oct 2016

    Research output: Book/Report › Commissioned report › Transfer

  79. Published

    MinTherm – Utilization of the overburden of existing underground structures for deep geothermal projects / MinTherm – Geothermische Nutzung des Überlagerungspotenzials in unterirdischen Infrastrukturen für tiefe Geothermie

    Lorenz, S., Stoxreiter, T. & Galler, R., Oct 2016, In: Geomechanics and tunnelling = Geomechanik und Tunnelbau. 9.2016, 5, p. 481-488 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  80. Published

    Assessment of thermal shock resistance by HMOR test with high heating rate

    Gruber, D., Sidi Mammar, A., Harmuth, H. & Grasset-Bourdel, R., 28 Sept 2016, 59th International Colloquium on Refractories - Refractories for Metallurgy. Aachen

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  81. Published

    Inclined vs. vertical testing of falling rock protection systems

    Heiss, C., 27 Sept 2016.

    Research output: Contribution to conference › Presentation › Research

  82. Published

    The graphite mine of Zettlitz, Drosendorf (Bohemian Massif, Austria)

    Müller, N.-L., Boschi, P., Boschi, M., Melcher, F., Rantitsch, G., Tscharf, A. & Prochaska, W., 25 Sept 2016, Abstract Volume of GeoTirol 2016 : Annual Meeting of DGGV and PANGEO Austria, 25.-28. September 2016. Innsbruck, p. 227

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  83. Published

    Advanced Measures to Characterize the Mechanical Properties of Refracrories

    Jin, S., Harmuth, H., Gruber, D. & Sidi Mammar, A., 20 Sept 2016, Proceedings of the 7th International Symposium on Refractories ISR 2016, Xi'an, China, September 20-22, 2016. p. 1-6 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  84. Published

    Main Wear Mechanisms of SEN Slag Band Materials

    Harmuth, H., Kircher, V. & Kölbl, N., 20 Sept 2016, Proc. 7th International Conference on Refractories ISR 2016, Xi'an, China, September 20-22. p. 1-7 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  85. Published

    Stability of Magnesia bricks under the conditions of steel degassing – a case study

    Harmuth, H., 18 Sept 2016.

    Research output: Contribution to conference › Presentation › Research

  86. Published

    Microwave assisted hard rock cutting

    Hartlieb, P. & Grafe, B., 14 Sept 2016.

    Research output: Contribution to conference › Presentation › Research

  87. Published

    Disc Cutter Load Monitoring - developments and why is there a need for

    Stoxreiter, T. & Wenighofer, R., 13 Sept 2016.

    Research output: Contribution to conference › Presentation › Research

  88. Published

    The importance of research on alternative and hybrid rock extraction methods

    Sifferlinger, N. A., Hartlieb, P. & Moser, P., 13 Sept 2016.

    Research output: Contribution to conference › Presentation › Research

  89. Published

    Accuracy related research on the use of UAV in Mine Surveying

    Tscharf, A., Rumpler, M., Mayer, G., Fraundorfer, F. & Bischof, H., 12 Sept 2016.

    Research output: Contribution to conference › Poster › Research › peer-review

  90. Published

    A MINERALOGICAL STUDY OF ROCK FRACTURE PATTERNS UNDER THERMAL LOADING

    Nicco, M., Holley, E., Kaunda, R., Hartlieb, P., Arora, S. & Nelson, P., Sept 2016, Abstracts with Programs. 7 ed. Geological Society of America, Vol. 48.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  91. Published

    UNDERSTANDING THE EFFECT OF MICROWAVE IRRADIATION ON PHYSICAL PROPERTIES OF ROCKS USING LABORATORY TESTING AND NUMERICAL MODELING

    Arora, S., Kaunda, R., Holley, E., Hartlieb, P., Nicco, M. & Nelson, P., Sept 2016.

    Research output: Contribution to conference › Poster › Research

  92. Published

    2. Zwischenbericht RSA Plastic Reborn

    Schwabl, D., Kranzinger, L., Bauer, M., Flachberger, H., Lehner, M. & Pomberger, R., 16 Aug 2016, Eigenverlag. 49 p.

    Research output: Book/Report › Commissioned report › Research

  93. Published

    Functional Safety for the Underground Mining Safety Device Proximity Detection in No-Go-Zones

    Rath, G. & Sifferlinger, N. A., Aug 2016, 17th IFAC Symposiuk on Control, Optimization and Automation in Mining, Mineral and Metal Processing: August 31 - September 2, 2016, Vienna.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  94. Published

    Stand der Technik der Versatztechnologie im untertägigen Bergbau

    Moser, A., Aug 2016, In: Berg- und hüttenmännische Monatshefte : BHM. 161, 8, p. 345-350 5 p., 8.

    Research output: Contribution to journal › Article › Research

  95. Published

    Effect of Compounding Method on Rheological, Thermal and Mechanical Behavior of Blast Furnace Slag Filled Polystyrene Compounds

    Mostafa, H., Pacher, G., Lucyshyn, T., Holzer, C., Flachberger, H., Krischey, E., Fritz, B. & Laske, S., 27 Jul 2016.

    Research output: Contribution to conference › Presentation › Research

  96. Published

    Irreversible thermodynamics applied to diffusional phase transformations

    Gamsjäger, E. & Kircher, V. (Co-editor), 29 Jun 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  97. Published

    Scherversuche von flexiblen Scherdübeln für den Einsatz bei Querschlagsanschlägen mit schlanken Tübbingauskleidungen

    Gehwolf, P., Walter, A., Galler, R. & Wagner, H., 15 Jun 2016, In: Geomechanics and tunnelling = Geomechanik und Tunnelbau. 9.2016, 3, p. 234-242 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  98. Published

    Schutzeinrichtungen für Gefahrenzonen im Untertagebergbau - Stand der Technik

    Sifferlinger, N. A., 9 Jun 2016.

    Research output: Contribution to conference › Abstract

  99. Published

    SYSTEM ZUM ERMITTELN EINES ORTSBRUSTBILDES

    Galler, R. (Inventor), Wenighofer, R. (Inventor) & Entacher, M. (Inventor), 8 Jun 2016, IPC No. G01C 7/ 06 A I, Patent No. EP3028006, Priority date 21 Jul 2014, Priority No. WO2014EP65652

    Research output: Patent

  100. E-pub ahead of print

    The Drop Weight Test Revisited: Characterization of the Crushability of Hot Sinter and Validation of the Approach with Natural Rocks

    Öfner, W. & Zaunrith, G., 2 Jun 2016, (E-pub ahead of print) In: Berg- und hüttenmännische Monatshefte : BHM. 161.2016, 6, p. 277-282 6 p.

    Research output: Contribution to journal › Article › Transfer › peer-review

  101. Published

    Deformation measurements of tunnel segments at a newly developed test rig

    Gehwolf, P., Monsberger, C., Barwart, S., Wenighofer, R., Galler, R., Lienhart, W., Haberler-Weber, M., Moritz, B., Barwart, C. & Lange, A., Jun 2016, In: Geomechanics and tunnelling = Geomechanik und Tunnelbau. 9.2016, 3, p. 180-187 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  102. Published

    Fundamental investigations for the design of fluorine free mold powder compositions

    Marschall, I., Yang, X. & Harmuth, H., 22 May 2016, Advances in Molten Slags, Fluxes, and Salts: Proceedings of the 10th International Conference on Molten Slags, Fluxes and Salts. Reddy, R. G., Chaubal, P., Pistorius, P. C. & Pal, U. (eds.). Seattle Washington USA, p. 299 306 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Previous 1...10 11 12 13 14 15 16 17 ...36 Next
View graph of relations

Contact information

Franz-Josef-Strasse 18, 8700 Leoben
  • Main phone number: +43 3842 402 6601