Chair of Mining Engineering and Mineral Economics (200)

Organisational unit: Chair

501 - 600 out of 1,449Page size: 100

Research output

  1. 2018
  2. Published

    Kriegerdenkmal in Rattendorf im Gailtal: 15cm Küstenkanonen L/40

    Sifferlinger, N. A., Sept 2018, In: Österreich maritim : Zeitschrift der Freunde Historischer Schiffe . p. 24-25 2 p.

    Research output: Contribution to journal › Article › Research

  3. Published

    Metal Mining’s Environmental Pressures: A Review and Updated Estimates on CO2 Emissions,Water Use, and Land Requirements

    Tost, M., Bayer, B., Hitch, M., Lutter, S., Moser, P. & Feiel, S., 14 Aug 2018, In: Sustainability / Molecular Diversity Preservation International (MDPI) . 2018, 10, 14 p., 2881.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    REMIX - Smart and Green Mining Regions of EU

    Tscharf, A., Jul 2018, In: Stein & Kies (Mitgliederzeitung - Forum mineralische Rohstoffe). 2018, 155, p. 11

    Research output: Contribution to journal › Article › Research

  5. Accepted/In press

    Prevention of secondary dust emissions in ironmaking plants using dust suppressants: Second Annual Report

    Grübler, C., Sifferlinger, N. A. & Prenner, M., 8 Jun 2018, (Accepted/In press)

    Research output: Book/Report › Commissioned report › Research

  6. Published

    A review of the development of better prediction equations for blast fragmentation

    Ouchterlony, F. & Sanchidrián, J. A., Jun 2018, Rock Dynamics – Experiments, Theories and Applications: Proceedings of the 3rd International Conference on Rock Dynamics and Applications (RocDyn-3). Li, C. C., Li, X. & Zhang, Z.-X. (eds.). Boca Raton, p. 25-45 21 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  7. Published

    Effect on comminution properties of blast preconditioned magnetic mortar

    Mansouri, H., Ouchterlony, F., Inanloo, H. & Böhm, A., Jun 2018, Fragblast 12: 12th International Symposium on Rock Fragmentation by Blasting. Schunnesson, H. & Johansson, D. (eds.). Luleå: Luleå Univ. of Technology, p. 407-414 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    Filming blast fragmentation of rock and mortar cylinders

    Kukolj, I., Iravani, A., Ouchterlony, F., Weiß, C. & Lubensky, J., Jun 2018, Fragblast 12: 12th International Symposium on Rock Fragmentation by Blasting. Schunnesson, H. & Johansson, D. (eds.). Luleå: Luleå Univ. of Technology, p. 483-494 12 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. Published

    Modelling blast fragmentation of cylinders of mortar and rock

    Iravani, A., Kukolj, I., Ouchterlony, F., Antretter, T. & Åström, J., Jun 2018, Fragblast 12: 12th International Symposium on Rock Fragmentation by Blasting. Schunnesson, H. & Johansson, D. (eds.). Luleå: Luleå Univ. of Technology, p. 597-610 15 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. Published

    The fragmentation-energy fan concept applied to blasting and drop weight comminution of rock

    Ouchterlony, F. & Sanchidrián, J. A., Jun 2018, Fragblast 12: 12th International Symposium on Rock Fragmentation by Blasting. Schunnesson, H. & Johansson, D. (eds.). Luleå: Luleå Univ. of Technology, p. 689-701 13 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  11. Published

    SOLID STATE MATERIAL DRIVEN TURBINE

    Prenner, M. (Inventor), 23 May 2018, IPC No. F03G3/02, F03G3/04, Patent No. EP2788622 (B1)

    Research output: Patent

  12. Published

    Bidirectionally Coupled DEM–CFD Simulation: Reducing Dust Emission in Conveyor Technology

    Grübler, C. & Prenner, M., 10 May 2018

    Research output: Non-textual form › Web publication/site › Research

  13. Published

    Rock mechanics implications of microwave treatment of rock as part of a hybrid system for mechanical excavation of rock for civil and mining applications

    Hartlieb, P. & Rostami, J., May 2018, Geomechanics and Geodynamics of Rock Masses: Proceedings of EUROCK 2018. Vol. 2. p. 1017–1023 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  14. Published

    UAV-Anwendungen im Bergbau - Modellversuche als Beitrag zur photogrammetrischen Forschung und Entwicklung

    Tscharf, A., Schenk, F., Mayer, G., Fraundorfer, F. & Bischof, H., May 2018, Schriftenreihe des Instituts für Markscheidewesen und Geodäsie an der TU Bergakademie Freiberg. Freiberg, Vol. 2018-1. p. 30-43

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  15. Published

    UAVs zur Qualitätssteuerung im Tagbau

    Tscharf, A., Mayer, G., Fraundorfer, F. & Gaich, A., 1 Apr 2018, In: Berg- und hüttenmännische Monatshefte : BHM. 163, 4, p. 124-130 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Staubemission in der Fördertechnik: Bidirektional gekoppelte DEM-CFD-Simulation zur Minimierung der Staubentwicklung

    Grübler, C., 27 Mar 2018, In: CADFEM Journal. 2018, 1, p. 44-45 2 p.

    Research output: Contribution to journal › Article › Research

  17. Published

    Entwicklung eines Systems zur Auskleidung von Sprengbohrlöchern beim Einsatz von losem Emulsionssprengstoff

    Seidl, T., Heiss, C. & Föger, M., 1 Mar 2018, In: Berg- und hüttenmännische Monatshefte : BHM. 163, 4, p. 131-134 4 p.

    Research output: Contribution to journal › Article › Transfer › peer-review

  18. Published

    The fragmentation‑energy fan concept and the Swebrec function in modeling drop weight testing

    Ouchterlony, F. & Sanchidrián, J. A., Mar 2018, In: Rock mechanics and rock engineering. October 2018, 51/10, p. 3129–3156 28 p.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    The state of environmental sustainability considerations in mining

    Tost, M., Hitch, M., Chandurkar, V., Moser, P. & Feiel, S., 7 Feb 2018, In: Journal of Cleaner Production. 2018, 182, p. 969 977 p.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Stand der Technik in der Tagbauvermessung

    Tscharf, A., 1 Feb 2018, In: Berg- und hüttenmännische Monatshefte : BHM. 163, 2, p. 57-63 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Das europäische Horizon 2020-Forschungsprojekt "Sustainable Low Impact Mining - SLIM"

    Ouchterlony, F., Sifferlinger, N. A. & Brechelmacher, A., Feb 2018, In: Berg- und hüttenmännische Monatshefte : BHM. 163, 2, p. 52-56 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Simulation von Fördergurten mittels der DEM

    Fimbinger, E. & Prenner, M., 31 Jan 2018, Fördertechnik im Bergbau: 8. Kolloquium. Langefeld, O. (ed.). Clausthal - Zellerfeld, p. 121 13 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  23. Published

    Co-existance of men and autonomous machinery in confined underground space: Need for proximity detection and systems with functional safety

    Sifferlinger, N. A., 30 Jan 2018, Use of robotics and automation for mineral prospecting and extraction: Conference Proceedings. p. 39-40 2 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. Published

    Pre-conditioning of hard rocks as means of increasing the performance of disc cutters for tunneling and shaft construction

    Hartlieb, P. & Rostami, J., 1 Jan 2018, North American Tunneling 2018 Proceedings. Vol. 1. p. 185-189 5 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  25. Published

    Reaction of different rock types to low-power (3.2 kW) microwave irradiation in a multimode cavity

    Hartlieb, P., Kuchar, F., Moser, P., Kargl, H. & Restner, U., Jan 2018, In: Minerals engineering. 118

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Abbau- und Auffüllungsplanung des Kalksteinbergbaus und Deponie Lassing der Paltentaler Splitt und Marmorwerke GmbH

    Glatz, G., 2018

    Research output: Thesis › Master's Thesis

  27. Published

    Analysis and Evaluation of Three-dimensional Geology Mechanical Model Experiment

    ZHANG, Y., 2018

    Research output: Thesis › Master's Thesis

  28. Published

    An Analysis of Unsafe Acts of Coal Mine Rescue Accidents

    XIANG, Y., 2018

    Research output: Thesis › Master's Thesis

  29. Published

    Assessing Economic and Environmental in the coal mining area under economic fluctuations and volatility energy market

    MOHAMED, S., 2018

    Research output: Thesis › Master's Thesis

  30. Published

    Baseline study of the Paraguayan brick production sector

    Arco, C.-H., 2018

    Research output: Thesis › Master's Thesis

  31. Published

    Das Projekt raPHOSafe

    Hartlieb, P. & Layr, K., 2018, In: Stein & Kies (Mitgliederzeitung - Forum mineralische Rohstoffe). 157, p. 11

    Research output: Contribution to journal › Letter

  32. Published

    Design of a ContBlast unit for lining while charging with considerations for placement of detonator and primer

    Föger, M., 2018

    Research output: Thesis › Master's Thesis

  33. Published

    Development of technology for alluvial titanium ore processing under conditions of Velta LLC

    PECHERSKYI, V., 2018

    Research output: Thesis › Master's Thesis

  34. Published

    Entwicklung und Konstruktion eines Fördersystems für containermobile Aufbereitungsanlagen

    Seisenbacher, L., 2018

    Research output: Thesis › Master's Thesis

  35. Published

    Evaluation of cutting forces in granite treated with microwaves on the basis of multiple linear regression analysis

    Shepel, T., Grafe, B., Hartlieb, P., Drebenstedt, C. & Malovyk, A., 2018, In: International Journal of Rock Mechanics and Mining Sciences. 107, p. 69-74 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Feasibility study of Aynak Copper Deposit – Logistics, Infrastructure, Processing and Auxiliary Operations

    NOORHAN, W., 2018

    Research output: Thesis › Master's Thesis

  37. Published

    Feasibility Study of Aynak Copper Deposit-Production Planning

    BARYAL, M., 2018

    Research output: Thesis › Master's Thesis

  38. Published

    Gebirgsmechanische Betrachtung und Beschreibung des Festenverhaltens in einem tiefen österreichischen Hartgesteinsbergbau

    Daborer, A., 2018

    Research output: Thesis › Master's Thesis

  39. Published

    Investigation into the utilisation and exploitation of abandoned mining areas, with a recommended plan for remediation and subsequent use of the New Mill Site, Roseworthy, Cornwall, UK

    WELLS, D., 2018

    Research output: Thesis › Master's Thesis

  40. Published

    Methods for Characterizing Cracks Induced in Rock

    Nicco, M., Holley, E., Hartlieb, P., Kaunda, R. & Nelson, P., 2018, In: Rock mechanics and rock engineering. p. 1-19 19 p.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Mineralische Rohstoffe: Die Basis für Innovation und Nachhaltigkeit

    Moser, P., 2018, Zukunft Erkennen/ Gestalten. Androsch, H. & Pelinka, P. (eds.). Wien, p. 224-230 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. Published

    Motivation Crowding and Participation in Agri-Environmental Schemes – The Case of the Austrian Öpul-Programme in Vineyards

    Kieninger, P. R., Gugerell, K., Biba, V., Auberger, I., Silvia, W. & Penker, M., 2018, In: European countryside . 10.2018, 3, p. 355-376 22 p.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Nassgewinnung von Sand und Kies - Stand der Technik und praktische Untersuchungen an ausgewählten Grundwasserseen in Niederösterreich

    Schmid, A., 2018

    Research output: Thesis › Master's Thesis

  44. Published

    Numerical analysis of a limestone underground mine based on a room and pillar underground mine in Spain

    PAYAN DURAN, S., 2018

    Research output: Thesis › Master's Thesis

  45. Published

    Optimization of Ergonomic and Logistic Concepts for Automated Bolting Units

    Schöffmann, M., 2018

    Research output: Thesis › Master's Thesis

  46. Published

    Organization of Second-Class Explosives “Amonal” and “Zayad”

    SHYLIN, S., 2018

    Research output: Thesis › Master's Thesis

  47. Published

    Prediction of Methane Emission Quantity Based on Back- Propagation Neural Network

    FAN, Y., 2018

    Research output: Thesis › Master's Thesis

  48. Published

    Sustainable technology of waste electrical and electronic equipment (WEEE) recycling

    LYSENKO, D., 2018

    Research output: Thesis › Master's Thesis

  49. Published

    The Development of Fractures in Overlying Strata and Design of Methane Drainage on 2874W working face Qianjiaying Coal Mine

    YEDIGEYEVA, G., 2018

    Research output: Thesis › Master's Thesis

  50. Published

    Über den Einfluss unterschiedlicher Prüfanordnungen (schräg vs. vertikal) auf die Beurteilung flexibler Steinschlagschutzsysteme nach ETAG 027

    Heiss, C., 2018, In: Wildbach- und Lawinenverbau. 82, 182, p. 318-335 17 p.

    Research output: Contribution to journal › Article › Research

  51. 2017
  52. Published

    Staubemissionen in der Fördertechnik: Vergleich von bidirektional gekoppelten DEM-CFD Simulationen, Laborversuchen und Industrieanlagen

    Grübler, C. & Prenner, M., 12 Dec 2017

    Research output: Non-textual form › Web publication/site › Research

  53. Published

    Aktuelle Infrastruktur im Labor für Gesteins- und Materialprüfung der Lehrstühle für Subsurface Engineering und für Bergbaukunde, Bergtechnik und Bergwirtschaft an der Montanuniversität Leoben

    Heiss, C. & Krainz, J., 17 Nov 2017, In: Berg- und hüttenmännische Monatshefte : BHM. 162.2017, 12, p. 546-551 6 p.

    Research output: Contribution to journal › Article › Research

  54. Published

    Simulation von Bauteilen mittels der DEM

    Fimbinger, E. & Prenner, M., 15 Nov 2017, WerWasWo.Forschung@MUL. Leoben: Eigenverlag, Vol. 2017. p. 175 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  55. Published

    Simulation von Bauteilen mittels der DEM

    Fimbinger, E. & Prenner, M., 15 Nov 2017.

    Research output: Contribution to conference › Poster › Research

  56. Published

    Staubausbreitung im Stahlwerk

    Grübler, C., 15 Nov 2017, WerWasWO.Forschung@MUL. Leoben, Vol. 2017.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  57. Published

    Theoretical Investigations on the Influence of Artificially Altered Rock Mass Properties on Mechanical Excavation

    Hartlieb, P. & Bock, S., 9 Nov 2017, In: Rock mechanics and rock engineering. 51.2018, March, p. 801–809 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  58. E-pub ahead of print

    Experimental study on artificially induced crack patterns and their consequences on mechanical excavation processes

    Hartlieb, P., Grafe, B., Shepel, T., Malovyk, A. & Akbari, B., 5 Nov 2017, (E-pub ahead of print) In: International Journal of Rock Mechanics and Mining Sciences. 100.2017, December, p. 160-169 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  59. Published

    Computational muck pile characterization

    Tscharf, A. & Mayer, G., Nov 2017.

    Research output: Contribution to conference › Poster › Research

  60. Published

    SLIM - Sustainable Low Impact Mining: Europäisches Horizon 2020 - Forschungsprojekt

    Tscharf, A. & Sifferlinger, N. A., Nov 2017, In: Stein & Kies (Mitgliederzeitung - Forum mineralische Rohstoffe). 151, p. 11

    Research output: Contribution to journal › Article › Research

  61. Published

    UAV-Photogrammetrie zur Qualitätssteuerung im Tagbau

    Tscharf, A., Nov 2017, In: GeoNews : Software-Magazin für Vermessung und Geoinformation / rmData. 26, 4, p. 6-7

    Research output: Contribution to journal › Article › Research

  62. Published

    Technical Report - Finite Element Analysis - 14" Integral Blind Flange CL1500

    Hopp, S., Stojkovic, S., Pramstaller, M. & Prenner, M., Oct 2017, 28 p.

    Research output: Book/Report › Commissioned report › Research

  63. Published

    Technical Report - Finite Element Analysis - 14" Integral Blind Flange CL900

    Hopp, S., Stojkovic, S., Pramstaller, M. & Prenner, M., Oct 2017, 28 p.

    Research output: Book/Report › Commissioned report › Research

  64. Published

    Technical Report - Finite Element Analysis - 14" Integral Blind Flange CL900 elasto plastic

    Hopp, S., Stojkovic, S., Pramstaller, M. & Prenner, M., Oct 2017, 23 p.

    Research output: Book/Report › Commissioned report › Research

  65. Published

    The fragmentation energy fan, a Universal behavior of blasted rock? EFFE Newsletter

    Ouchterlony, F., Sept 2017, In: Newsletter / European Federation of Explosives Engineers . 2017, September, p. 30-46 17 p.

    Research output: Contribution to journal › Article › Research

  66. Published

    Is it time for a Global Mining Initiative 2.0?

    Tost, M., Chandurkar, V., Hitch, M., Moser, P. & Feiel, S., 28 Jun 2017, Mineral Exploitation and Sustainability - Proceedings of SDIMI 2017. Vol. Vol2. p. 41-47 7 p. (Geo-Resources Environment and Engineering; vol. Vol2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  67. Published

    „Structure from Motion" zur flächigen Deformationsvermessung unter Tage -: Modellversuche als Beitrag zur Entwicklung eines nutzerfreundlichen Messsystems unter Verwendung von Bildern

    Berger, M., Tscharf, A. & Mayer, G., 15 May 2017, In: Berg- und hüttenmännische Monatshefte : BHM. 162.2017, 6, p. 210-215 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  68. Published

    Experimental method for capturing dynamic crack propagation in rock-like material

    Kukolj, I., Ouchterlony, F. & Moser, P., 19 Apr 2017, International Forum of Young Researchers - Topical Issues of Subsoil Usage: Topical Issues of Rational Use of Natural Resources. St. Petersburg, Russian Federation, Vol. 1. p. 53-55 3 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  69. Published

    Charakterisierung von gesprengtem Haufwerk mittels UAV

    Tscharf, A., Feb 2017, In: Stein & Kies (Mitgliederzeitung - Forum mineralische Rohstoffe). 147, p. 11-11

    Research output: Contribution to journal › Article › Research

  70. Published

    The fragmentation-energy fan, a universal behavior of blasted rock?

    Ouchterlony, F., Sanchidrián, J. A. & Moser, P., 29 Jan 2017, Proc 43rd ISEE Conference on Explosives and Blasting Technique. Cleveland, OH, Vol. 43. p. 281-294 14 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  71. Published

    xP-frag, a distribution-free model to predict blast fragmentation

    Sanchidrián, J. A. & Ouchterlony, F., 29 Jan 2017, Proc 43rd ISEE Conference on Explosives and Blasting Technique. Cleveland, OH, Vol. 43. p. 265-280 16 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  72. Published

    A Distribution-Free Description of Fragmentation by Blasting Based on Dimensional Analysis

    Sanchidrián, J. A. & Ouchterlony, F., 2017, In: Rock mechanics and rock engineering. 50.2017, 4, p. 781-806 26 p.

    Research output: Contribution to journal › Article › Research › peer-review

  73. Published

    Anwendung von Gebirgsklassifikationssystemen im untertägigen Bergbau

    Kirschner, P. & Moser, A., 2017, In: Berg- und hüttenmännische Monatshefte : BHM. 162, 6

    Research output: Contribution to journal › Article › Research

  74. Published

    Deposit modeling procedure for steep-dipping veins (lithium project Koralpe) using Surpac

    Martinez Rodriguez, A., 2017

    Research output: Thesis › Master's Thesis

  75. Published

    Der Einsatz unbemannter Flugsysteme zur Charakterisierung von gesprengtem Haufwerk

    Tscharf, A., Mayer, G., Mostegel, C., Fraundorfer, F., Gaich, A. & Bischof, H., 2017, Schriftenreihe des Instituts für Markscheidewesen und Geodäsie an der TU Bergakademie Freiberg. Benndorf, J. (ed.). Freiberg, Vol. 2017-1. p. 132 - 145

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  76. Published

    Emergence of Differential Social License: A Case of Impact and Benefit Agreements in Nunavut, Canada

    Hitch, M., Tost, M., Moser, P. & Feiel, S., 2017, Proceedings of the 8th International Conference on Sustainable Development in the Minerals Industry.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  77. Published

    Experimental Study on Microwave Assisted Hard Rock Cutting of Granite

    Hartlieb, P. & Grafe, B., 2017, In: Berg- und hüttenmännische Monatshefte : BHM. 162, 2, p. 77-81

    Research output: Contribution to journal › Article › Research

  78. Published

    Feasibility Study of Aynak Copper Deposit-Technology Planning

    SHADAB, S. Z., 2017

    Research output: Thesis › Master's Thesis

  79. Published

    Fracturing Mechanisms in Granite when Exposed to Different Modes of Microwave Irradiation

    Akbari, B., 2017

    Research output: Thesis › Master's Thesis

  80. Published

    Geotechnische Beurteilung eines untertägigen Bergbaues

    Schinagl, S. & Moser, A., 2017, In: Berg- und hüttenmännische Monatshefte : BHM. 162, 6

    Research output: Contribution to journal › Article › Research

  81. Published

    Geotechnische Charakterisierung des Reviers 6 des Magnesitbergbaus Breitenau

    Schinagl, S., 2017

    Research output: Thesis › Master's Thesis

  82. Published

    Glück auf, Bergleut! Der Lavanttaler Kohlenbergbau

    Sifferlinger, N. A. & Ragger, C., 2017, Edition Museum im Lavanthaus ed. Wolfsberg. 104 p.

    Research output: Book/Report › Book › Research

  83. Published

    Investigating the reduction of cutting resistance of granite specimen induced by microwave irradiation with varying irradiation times

    MALOVYK, A., 2017

    Research output: Thesis › Master's Thesis

  84. Published

    Key issues in the rock mechanical design of support pillar systems

    Ladinig, T., 2017, VIII International Research and Practice Conference “Innovations in Mining Enterprise Engineering: Geomechanical Tools in Planning, Design and Mining Operations”.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  85. Published

    Monitoring and Electrolytic Removal of Nickel from Bismuth and the Lead-bismuth Eutectic

    Zaunrith, G. A., 2017

    Research output: Thesis › Master's Thesis

  86. Published

    Neuausrichtung des Brech- und Förderablaufes im Steinbruch Bad Häring

    Male, F., 2017

    Research output: Thesis › Master's Thesis

  87. Published

    Newton Force Monitoring and Numerical Simulation Analysis of "Landslide 2016-1101" in NanFen Open-pit Iron Mine

    ZHAO, S., 2017

    Research output: Thesis › Master's Thesis

  88. Published

    Numerical study of the influence of irradiation parameters on the microwave-induced stresses in granite

    Toifl, M., Hartlieb, P., Meisels, R., Antretter, T. & Kuchar, F., 2017, In: Minerals engineering. 103-104.2017, April, p. 78-92 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  89. Published

    Optimization of a leaching process for copper-bearing materials by means of biotechnologically produced leaching agents such as acetic acid, citric acid ammonium and (poly) glutamic acid

    PANKOV, F., 2017

    Research output: Thesis › Master's Thesis

  90. Published

    Percentile Fragment Size Predictions for Blasted Rock and the Fragmentation–Energy Fan

    Ouchterlony, F., Sanchidrián, J. A. & Moser, P., 2017, In: Rock mechanics and rock engineering. 50.2017, 4, p. 751-779 29 p.

    Research output: Contribution to journal › Article › Research › peer-review

  91. Published

    Possibilities of utilizing cutting force analysis for sensing different lithologies during mechanical excavation

    RIMOS, P., 2017

    Research output: Thesis › Master's Thesis

  92. Published

    Studies on the effect of high power microwave irradiation as a means of inducing damage to very hard rock to reduce the cutting resistance during mechanical excavation

    Grafe, B., Shepel, T., Drebenstedt, C. & Hartlieb, P., 2017, Proceedings of the 26th International Symposium on Mine Planning and Equipment Selection. Ghodrati, B., Kumar, U. & Schunesson, H. (eds.). Lulea

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  93. Published

    The importance of research on alternative and hybrid rock extraction methods

    Sifferlinger, N. A., Hartlieb, P. & Moser, P., 2017, In: Berg- und hüttenmännische Monatshefte : BHM. 162, 2, p. 58-66

    Research output: Contribution to journal › Article › Research

  94. Published

    Theoretical investigations on the influence of artificially induced joints on the performance of mechanical rock excavation by roadheaders

    Bock, S., 2017

    Research output: Thesis › Master's Thesis

  95. Published

    Überlegungen zur Sicherung von Personen und Infrastrukturbauwerken gegen Steinschlag im alpinen Bereich unter besonderer Berücksichtigung flexibler Steinschlagschutzsysteme - Modellierung flexibler Steinschlagschutzsysteme im Labormaßstab zur Beurteilung nichtgenormter Lastfälle

    Heiss, C., 2017

    Research output: Thesis › Doctoral Thesis

  96. Published

    Untersuchungen zur Frage des Verhaltens von Gesteinsproben bei Druckbeanspruchung unter Bedingungen eingeschränkter Querverformung

    Nurschinger, F., 2017

    Research output: Thesis › Master's Thesis

  97. Published

    xP-frag: a new model to predict fragmentation from blasting

    Sanchidrián, J. A. & Ouchterlony, F., 2017, APS Blasting 5; New development on engineerign blasting: Proc 5th Asia-Pacific Symposium on Blasting Techniques . Wang, X. (ed.). Beijing, China, p. 31-36 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  98. 2016
  99. Published

    Potentiale und Herausforderungen der UAV-Vermessung im Bergbau – Stand der Forschung und Ausblick

    Tscharf, A., Mayer, G., Rumpler, M., Fraundorfer, F. & Bischof, H., Dec 2016, In: Markscheidewesen, Das. 123.2016, 2-3, p. 33-40 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  100. Published

    Min.Guide Projekt: Horizon 2020

    Tost, M., 2 Nov 2016, In: Stein & Kies (Mitgliederzeitung - Forum mineralische Rohstoffe). 145, Nov-Dez 2016, p. 11 1 p.

    Research output: Contribution to journal › Article › Transfer

  101. Published

    Influence of testing methods on the determination of the aging behaviour of shales

    Hohl, W., Hujer, W., Persaud, M., Germay, C., Lhomme, T. & Finkbeiner, T., 26 Oct 2016, Proceedings EAGE/SPE Workshop on Integrated Geomechanics in E&P: Manage & Improve Asset Performance using Geomechanics.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  102. Published

    Bericht über den Zwischenstand der Untersuchungen bezüglich des geplanten untertägigen Abbaus am Standort Gummern der Firma Omya GmbH. Teilbericht 2

    Wagner, H., Blaha, H. & Ladinig, T., 21 Oct 2016

    Research output: Book/Report › Commissioned report › Transfer

  103. Published

    Inclined vs. vertical testing of falling rock protection systems

    Heiss, C., 27 Sept 2016.

    Research output: Contribution to conference › Presentation › Research

Previous 12 3 4 5 6 7 8 9 ...15 Next
View graph of relations

Contact information

Franz-Josef-Strasse 18, 8700 Leoben
  • Main phone number: +43 3842 402 2001