Chair of Mechanics (400)

Organisational unit: Chair

301 - 350 out of 809Page size: 50

Research output

  1. 2015
  2. Published

    3D numerical study on microwave induced stresses in inhomogeneous hard rocks

    Toifl, M., Meisels, R., Hartlieb, P., Kuchar, F. & Antretter, T., 2015.

    Research output: Contribution to conference › Paper

  3. Published

    Degradation analysis of thin die-attach layer under cyclic thermal load in microelectronics packaging

    Pelisset, T. M. A., 2015

    Research output: Thesis › Doctoral Thesis

  4. Published

    Degradation of the electrical performance of Printed Circuit Boards (PCBs) after cyclic thermo-mechanical loading

    Fellner, K., 2015

    Research output: Thesis › Doctoral Thesis

  5. Published

    Elucidating the Sorption Mechanism of Dibromomethane in Disordered Mesoporous Silica Adsorbents

    Stoeckel, D., Wallacher, D., Zickler, G., Thommes, M. & Smarsly, B., 2015, In: Langmuir.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Experimental characterization and modelling of triaxial residual stresses in straightened railway rails

    Kaiser, R., Stefenelli, M., Hatzenbichler, T., Antretter, T., Hofmann, M., Keckes, J. & Buchmayr, B., 2015, In: The Journal of Strain Analysis for Engineering Design. 50, 3, p. 190-198 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Generalized Gaussian Error Functions and their Applications

    Dirschmid, H. & Fischer, F. D., 2015, In: Acta mechanica. 226, p. 2887 2897 p.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Growth and shrinkage of particles in slags

    Gamsjäger, E., Kircher, V. & Harmuth, H. (Co-editor), 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  9. Published

    Influence of the microstructure on rock damage during microwave irradiation: a 3D numerical analysis

    Toifl, M., Meisels, R., Hartlieb, P., Kuchar, F. & Antretter, T., 2015, Proceedings of Eurock 2015. Schubert, W. & Kluckner, A. (eds.). p. 731-736

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. Published

    Influence of the microstructure on rock damage during microwave irradiation: A 3D numerical analysis

    Toifl, M., Meisels, R., Hartlieb, P., Kuchar, F. & Antretter, T., 2015, Future Development of Rock Mechanics: Proceedings of the SRM Regional Symposium EUROCK 2015 & 64th Geomechanics Colloquium. Schubert, W. & Kluckner, A. (eds.). Salzburg: Österreichische Gesellschaft für Geomechanik, p. 731-736

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  11. Published

    Influence of the microstructure on rock damage during microwave irradiation: A 3D numerical analysis

    Toifl, M., Meisels, R., Hartlieb, P., Kuchar, F. & Antretter, T., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  12. Published

    Influence of the vehicle-track parameters on the crack growth in rails

    Kracalik, M., 2015

    Research output: Thesis › Doctoral Thesis

  13. Published

    Kinetics of Interstitial Segregation in Cottrell Atmospheres and Grain Boundaries

    Svoboda, J., Zickler, G., Kozeschnik, E. & Fischer, F. D., 2015, In: Philosophical magazine : Letters. 95, p. 458 465 p.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Microwave absorption and its thermo-mechanical consequences in heterogeneous rocks

    Toifl, M., Meisels, R., Hartlieb, P., Kuchar, F. & Antretter, T., 2015, Geomechanics from Micro to Macro - Proceedings of the TC105 ISSMGE International Symposium on Geomechanics from Micro to Macro, IS-Cambridge 2014. Vol. 2. p. 1545-1550 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  15. Published

    Microwave propagation and absorption and its thermo-mechanical consequences in heterogeneous rocks

    Meisels, R., Toifl, M., Hartlieb, P., Antretter, T. & Kuchar, F., 2015, In: International Journal of Mineral Processing. 135, p. 40-51

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Multi-scale modeling of bainitic phase transformation in multi-variant polycrystalline low alloy steels

    Mahnken, R., Schneidt, A., Antretter, T., Ehlenbröker, U. & Wolff, M., 2015, In: International journal of solids and structures. 54, p. 156-171

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Relaxation of a Precipitate Misfit Stress State by Creep in the Matrix

    Fischer, F. D., Svoboda, J., Antretter, T. & Kozeschnik, E., 2015, In: International journal of plasticity. 64, p. 164-176

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Simulation des thermomechanischen Verhaltens von Grobblechen während der Schnellkühlung

    Eßl, W., Antretter, T. & Parteder, E., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  19. Published

    Simulation of the packaging process of embedded components in printed circuit boards

    Macurova, K., 2015

    Research output: Thesis › Doctoral Thesis

  20. Published

    Size effects in residual stress formation during quenching of cylinders made of hot-work tool steel

    Schemmel, M., Prevedel, P., Schöngrundner, R., Ecker, W. & Antretter, T., 2015, In: Advances in Materials Science and Engineering. 7 p., 678056.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Stress and Deflection Development During Die Embedding into Printed Circuit Boards

    Macurova, K., Angerer, P., Bermejo, R., Pletz, M., Schöngrundner, R., Antretter, T., Krivec, T., Morianz, M., Brizoux, M. & Lecavelier, A., 2015, In: Materials Today: Proceedings. 2, 2, p. 4196-4205 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    The influence of a brittle Cr interlayer on the Deformation behavior of thin Cu films on flexible substrates: Experiment and Model

    Marx, V. M., Toth, F., Wiesinger, A., Berger, J., Kirchlechner, C., Cordill, M., Fischer, F. D., Rammerstorfer, F. G. & Dehm, G., 2015, In: Acta materialia. 89, p. 278-289

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    The kinetics of diffusive phase transformations in the light of trans-interface diffusion

    Gamsjäger, E. & Rettenmayr, M., 2015, In: Philosophical magazine. 95:26, p. 2851-2865

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Thermo-kinetic modeling of Mg-Si couple formation as a precursor to precipitation in Al-Mg-Si

    Shan, Y. V., Svoboda, J., Fischer, F. D. & Kozeschnik, E., 2015, Proceedings of the International Conference on Solid-Solid Phase Transformations in Inorganic Materials. TMS, p. 883 884 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  25. Published

    The rock cutting process of road headers - Overview of laboratory tests and numerical simulation

    Pittino, G., Galler, R., Mikl-Resch, M. J., Tichy, R., Ecker, W., Antretter, T., Gimpel, M. & Kargl, H., 2015, Future Development of Rock Mechanics: Proceedings of the ISRM Regional Symposium Eurock 2015 & 64th Geomechanics Colloquium. Schubert, W. & Kluckner, A. (eds.). Salzburg: Eigenverlag, p. 243-248 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  26. Published

    Versagen von feuerverzinkten Stahlbauteilen

    Panzenböck, M., Mendez Martin, F., Rashkova, B., Schütz, P. & Kaiser, R., 2015, Sonderbänder der praktischen Metallographie 47. p. 203-208

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. Published

    Versagen von feuerverzinkten Stahlbauteilen - Gefüge und Versagen von Werkstoffen

    Panzenböck, M., Mendez Martin, F., Rashkova, B., Schütz, P., Kaiser, R., Spiradek-Hahn, K. & Brabetz, M., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  28. Published

    Verzerrungsanalyse räumlich gekrümmter Flächen auf Basis konformer Abbildungsalgorithmen

    Ritt, R., 2015

    Research output: Thesis › Master's Thesis

  29. Published

    Voraussage von wachstumsfähigen Squats ausgehend von einer Fehlstelle im Randbereich der Fahrspur einer Schiene

    Kubin, W., 2015, 73 p.

    Research output: Thesis › Diploma Thesis

  30. 2014
  31. Published

    Modelling the role of compositional fluctuations in nucleation kinetics

    Ženíšek, J., Kozeschnik, E., Svoboda, J. & Fischer, F. D., 31 Jul 2014, In: Acta materialia. 91, p. 355-376

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Rolling Contact Fatigue of Three Crossing Nose Materials—Multiscale FE Approach

    Pletz, M., Daves, W., Yao, W. & Ossberger, H., 15 Jun 2014, In: Wear. 314, 1–2, p. 69-77 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Determination of Substitutional-Interstitial Interaction from Chemical Potentials of Interstitials in the Steel Matrix

    Shan, Y. V., Svoboda, J., Fischer, F. D. & Kozeschnik, E., May 2014, In: Advanced materials research. 922, p. 645-650

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    The role of phase interface energy in martensitic transformation: A lattice Monte-Carlo simulation

    Yastrebov, V. A., Fischlschweiger, M., Cailletaud, G. & Antretter, T., Mar 2014, In: Mechanics Research Communications. 56, p. 37-41

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Comparison of different methods for stress and deflection analysis in embedded die packages during the assembly process

    Macurova, K., Bermejo Moratinos, R., Pletz, M., Schöngrundner, R., Antretter, T., Krivec, T., Morianz, M., Brizoux, M. & Lecavelier, A., 1 Jan 2014, Proceedings - 2014 47th International Symposium on Microelectronics, IMAPS 2014. p. 355-360 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    Abnormal Grain Growth: A Non-Equilibrium Thermodynamic Model for Multi-Grain Binary Systems

    Svoboda, J. & Fischer, F. D., 2014, In: Modelling and simulation in materials science and engineering. 22, p. 015013-1-015013-15

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Accelerated cooling of heavy steel plates - selected aspects of modelling

    Kaltenbrunner, T., 2014

    Research output: Thesis › Diploma Thesis

  38. Published

    An Easy-to-Use Estimate of the Energy-Release Rate for Crack Arrays

    Fischer, F. D., Predan, J. & Kienzler, R., 2014, In: Archive of applied mechanics. 84, p. 1325-1337

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Application of the cyclic phase transformation concept for determining the effective austenite/ferrite interface mobility

    Gamsjäger, E., Chen, H. & van der Zwaag, S., 2014, In: Computational materials science. 83, p. 92-100

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Characterization and modeling of the AuSnCu thin solder joint under thermal cycling

    Pélisset, T., Karunamurthy, B., Otremba, R. & Antretter, T., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  41. Published

    Characterization and modeling of the AuSnCu thin solder joint under thermal cycling

    Antretter, T., Otremba, R., Karunamurthy, B. & Pélisset, T., 2014, Proceedings of the 15th International Conference on Thermal, Mechanical & Multi-Physics Simulation and Experiments in Microelectronics and Microsystems EuroSimE 2014.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. Published

    Characterization and Modeling of the Thermomechanical Fatigue Behavior of Brake Disks for High Speed Trains

    Raninger, P., 2014

    Research output: Thesis › Doctoral Thesis

  43. Published

    Chemically Induced Fracturing in Alkali Feldspar

    Scheidl, K. S., Schaeffer, A.-K., Petrishcheva, E., Habler, G., Fischer, F. D., Schreuer, J. & Abart, R., 2014, In: Physics and Chemistry of Minerals. 41, p. 1-16

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Coherent Analysis of Disordered Mesoporous Adsorbents using Small Angle X-Ray Scattering and Physisorption Experiments

    Stoeckel, D., Wallacher, D., Zickler, G., Perlich, J., Tallarek, U. & Smarsly, B., 2014, In: Physical chemistry, chemical physics : PCCP. 16, p. 6583-6592

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Computational simulation of instability phenomena in nanoparticles and nanofilms

    Todt, M., Toth, F., Hartmann, M., Holec, D., Cordill, M. J., Fischer, F. D. & Rammerstorfer, F. G., 2014, In: Computational Technology Reviews. 10, p. 89-119

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Critical assessment of the determination of residual stress profiles in thin films by means of the ion beam layer removal method

    Schöngrundner, R., Treml, R., Antretter, T., Kozic, D., Ecker, W. & Kiener, D., 2014, In: Thin solid films. p. 321-330

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Determination of cyclic mechanical properties of thin copper layers for PCB applications

    Fellner, K., Fuchs, P. F., Antretter, T., Pinter, G. & Schöngrundner, R., 2014, Proceedings 15th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  48. Published

    Determination of Depths of Multiple Traps for Interstitials and their Influence on Diffusion Kinetics

    Svoboda, J., Shan, Y. V., Kozeschnik, E. & Fischer, F. D., 2014, In: Modelling and simulation in materials science and engineering. 22, p. 065015-1-16

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Diffusion of elements and vacancies in multi-component systems

    Fischer, F. D. & Svoboda, J., 2014, In: Progress in materials science. 60, p. 338-367

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Estimation of Thermodynamic Data of Metallic Nanoparticles Based on Bulk Values

    Vollath, D. & Fischer, F. D., 2014, Metal Nanopowders: Production, Characterization, and Energetic Applications. p. 1-24

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  51. Published

    Evaluation of the residual stress distribution in thin films by means of the ion beam layer removal method

    Kozic, D., Treml, R., Schöngrundner, R., Brunner, R., Kiener, D., Antretter, T. & Gänser, H.-P., 2014, Proceedings of the 15th International Conference on Thermal, Mechanical & Multi-Physics Simulation and Experiments in Microelectronics and Microsystems EuroSimE 2014. Zhang, G. Q., Van Driel, W. D., Rodgers, P., Bailey, C. & de Saint Leger, O. (eds.). Institute of Electrical and Electronics Engineers, 6813785

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  52. Published

    FE - simulation of chip formation in inhomogeneous materials

    Distlberger, S., 2014, 144 p.

    Research output: Thesis › Diploma Thesis

Previous 1...3 4 5 6 7 8 9 10 ...17 Next
View graph of relations

Contact information

Franz-Josef-Strasse 18/III, 8700 Leoben
  • Main phone number: +43 3842 402 4001