Research output

1 - 351 out of 351Page size: 500
rss feed
  1. 2023
  2. E-pub ahead of print

    Feasibility of a Plasma Furnace for Methane Pyrolysis: Hydrogen and Carbon Production

    Daghagheleh, O., Schenk, J., Zarl, M. A., Lehner, M., Farkas, M. & Zheng, H., 26 Dec 2023, (E-pub ahead of print) In: Energies. 17.2024, 1, 16 p., 167.

    Research output: Contribution to journal › Article › Research › peer-review

  3. E-pub ahead of print

    The Behavior of Phosphorus in the Hydrogen-Based Direct Reduction—Smelter Ironmaking Route

    Pfeiffer, A., Thiele, K., Zheng, H., Mali, H., Wimmer, G. & Schenk, J., 27 Oct 2023, (E-pub ahead of print) In: Steel research international. 2024 ??? Stand: 3. April 2024, ??? Stand: 3. April 2024, 9 p., 2300268.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Investigation of the Impact of Biochar Application on Foaming Slags with Varied Compositions in Electric Arc Furnace-Based Steel Production

    Kieush, L. & Schenk, J., Aug 2023, In: Energies. 16.2023, 17, 29 p., 6325.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Prediction of Sinter Chemical Composition Based on Ensemble Learning Algorithms

    Niu, L., Liu, Z., Zhang, J., Sun, Q., Schenk, J., Wang, J. & Wang, Y., 26 Jul 2023, In: Journal of Sustainable Metallurgy. 9.2023, 3, p. 1168-1179 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  6. E-pub ahead of print

    Properties of liquid CaO–SiO2 and CaO–SiO2-‘Fe2O3’tot slags measured by a combination of maximum bubble pressure and rotating bob methods

    Cheremisina, E., Kovtun, O., Yehorov, A., Volkova, O. & Schenk, J., 27 Jun 2023, (E-pub ahead of print) In: Ceramics International. 49.2023, 18, p. 30104-30114 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Evaluation of Slag Foaming Behavior Using Renewable Carbon Sources in Electric Arc Furnace-Based Steel Production

    Kieush, L., Schenk, J., Koveria, A., Hrubiak, A., Hopfinger, H. & Zheng, H., 12 Jun 2023, In: Energies. 16.2023, 12, 25 p., 4673.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    The Behavior of Direct Reduced Iron in the Electric Arc Furnace Hotspot

    Pfeiffer, A., Ernst, D., Zheng, H., Wimmer, G. & Schenk, J., 18 May 2023, In: Metals. 13.2023, 5, 12 p., 978.

    Research output: Contribution to journal › Article › Research › peer-review

  9. E-pub ahead of print

    Modeling the Residence Time of Metal Droplets in Slag During BOF Steelmaking

    Mitas, B., Visuri, V. V. & Schenk, J., 17 May 2023, (E-pub ahead of print) In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 54.2023, August, p. 1938–1953 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Utilization of Renewable Carbon in Electric Arc Furnace-Based Steel Production: Comparative Evaluation of Properties of Conventional and Non-Conventional Carbon-Bearing Sources

    Kieush, L., Schenk, J., Koveria, A., Rantitsch, G., Hrubiak, A. & Hopfinger, H., 6 Apr 2023, In: Metals. 13.2023, 4, 16 p., 722.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Preparation of Micro-Electrolytic Iron-Carbon Filler for Sewage by Recycling Metallurgical Dust

    Xu, R., Zhang, Y., Huang, X., Cao, M., Yu, J., Zhang, J., Zheng, H. & Schenk, J., 29 Mar 2023, In: Metals. 13.2023, 4, 16 p., 673.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Phase Transition of Magnetite Ore Fines During Oxidation Probed by In Situ High-Temperature X-Ray Diffraction

    Zheng, H., Daghagheleh, O., Ma, Y., Taferner, B., Schenk, J. & Kapelyushin, Y., 13 Mar 2023, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 54.2023, 3, p. 1195-1204 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Impact of Iron Ore Pre-Reduction Degree on the Hydrogen Plasma Smelting Reduction Process

    Ernst, D., Manzoor, U., Souza Filho, I. R., Zarl, M. A. & Schenk, J., 10 Mar 2023, In: Metals. 13.2023, 3, 18 p., 558.

    Research output: Contribution to journal › Article › Research › peer-review

  14. E-pub ahead of print

    Effects of the Electrodes’ Shape and Graphite Quality on the Arc Stability During Hydrogen Plasma Smelting Reduction of Iron Ores

    Ernst, D., Zarl, M. A., Farkas, M. A. & Schenk, J., 9 Feb 2023, (E-pub ahead of print) In: Steel research international. 94.2023, 7, 12 p., 2200818.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Parameter Optimization for Hydrogen-Induced Fluidized Bed Reduction of Magnetite Iron Ore Fines

    Zheng, H., Schenk, J., Daghagheleh, O. & Taferner, B., 8 Feb 2023, In: Metals. 13.2023, 2, 10 p., 339.

    Research output: Contribution to journal › Article › Research › peer-review

  16. 2022
  17. Published

    Stahlrecycling – Potenziale und Herausforderungen für innovatives und nachhaltiges Recycling

    Dworak, S., Fellner, J., Beermann, M., Häuselmann, M., Schenk, J., Michelic, S. K., Cejka, J., Sakic, A., Mayer, J. & Steininger, K., 25 Nov 2022, In: Österreichische Wasser- und Abfallwirtschaft : ÖWAW . 75.2023, Februar, p. 97-107 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    A Comprehensive Review of Secondary Carbon Bio-Carriers for Application in Metallurgical Processes: Utilization of Torrefied Biomass in Steel Production

    Kieush, L., Rieger, J., Schenk, J., Brondi, C., Rovelli, D., Echterhof, T., Cirilli, F., Thaler, C. M., Jaeger, N., Snaet, D., Peters, K. & Colla, V., 23 Nov 2022, In: Metals. 12.2022, 12, 38 p., 2005.

    Research output: Contribution to journal › Review article › peer-review

  19. Published

    Fluidization behavior and reduction kinetics of pre-oxidized magnetite-based iron ore in a hydrogen-induced fluidized bed

    Zheng, H., Daghagheleh, O., Wolfinger, T., Taferner, B., Schenk, J. & Xu, R., 22 Oct 2022, In: International Journal of Minerals, Metallurgy and Materials. 29.2022, 10, p. 1873-1881 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Hydrogen plasma smelting reduction process monitoring with optical emission spectroscopy – Establishing the basis for the method

    Pauna, H., Ernst, D., Zarl, M., Aula, M., Schenk, J., Huttula, M. & Fabritius, T., 20 Oct 2022, In: Journal of Cleaner Production. 372, 12 p., 133755.

    Research output: Contribution to journal › Article › Research › peer-review

  21. E-pub ahead of print

    Density, viscosity and surface tension of high-silicate CaO–SiO2 and CaO–SiO2–Fe2O3 slags derived by aerodynamic levitation. The behavior of Fe3+ in high-silicate melts

    Cheremisina, E., Zhang, Z., de Bilbao, E. & Schenk, J., 2 Oct 2022, (E-pub ahead of print) In: Ceramics International. 49.2023, 3, p. 4460-4472 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Processing low grade Direct Reduced Iron – Definition and comparison of melting strategies

    Pfeiffer, A., Schenk, J., Wimmer, G. & Wurm, J., Oct 2022, 9th EOSC & 6th CTSI.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  23. Published

    Gasification Behaviors of Ferrocoke With and Without Water Vapor

    Xu, R., Deng, S., Zheng, H., Huang, X., Daghagheleh, O., Schenk, J., Zhang, J. & Zhu, J., 25 Sept 2022, In: Steel research international. 93.2022, 11, 12 p., 2200575.

    Research output: Contribution to journal › Article › Research › peer-review

  24. E-pub ahead of print

    Long-Term Reoxidation of Hot Briquetted Iron in Various Prepared Climatic Conditions

    Daghagheleh, O., Schenk, J., Zheng, H., Taferner, B., Forstner, A. & Rosenfellner, G., 23 Sept 2022, (E-pub ahead of print) In: Steel research international. 94.2023, 1, 7 p., 2200535.

    Research output: Contribution to journal › Article › Research › peer-review

  25. E-pub ahead of print

    Assessment of the dissolution rate and behaviour of raw dolomite and limestone with different calcination degrees in primary steelmaking slags

    Cheremisina, E., Lesiak, S., Rieger, J., Schenk, J., Firsbach, F., Johnson, W., Chopin, T. & Nispel, M., 15 Sept 2022, (E-pub ahead of print) In: Ironmaking and steelmaking. 50.2023, 4, p. 379-391 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  26. E-pub ahead of print

    Editorial for special issue on hydrogen metallurgy

    Zhang, J., Schenk, J., Liu, Z. & Li, K., 22 Aug 2022, (E-pub ahead of print) In: International Journal of Minerals, Metallurgy and Materials. 29.2022, 10, p. 1817-1819 3 p.

    Research output: Contribution to journal › Editorial › peer-review

  27. Published

    Investigations on the Interaction Behavior between Direct Reduced Iron and Various Melts

    Pfeiffer, A., Wimmer, G. & Schenk, J., 18 Aug 2022, In: Materials. 15.2022, 16, 14 p., 5691.

    Research output: Contribution to journal › Article › Research › peer-review

  28. E-pub ahead of print

    Mathematical Modeling of the Ejected Droplet Size Distribution in the Vicinity of a Gas–Liquid Impingement Zone

    Mitas, B., Visuri, V. V. & Schenk, J., 16 Aug 2022, (E-pub ahead of print) In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 53.2022, October, p. 3083–3094 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Investigation into the Effect of Multi-Component Coal Blends on Properties of Metallurgical Coke via Petrographic Analysis under Industrial Conditions

    Kieush, L., Koveria, A., Schenk, J., Rysbekov, K., Lozynskyi, V., Zheng, H. & Matayev, A., 11 Aug 2022, In: Sustainability (Switzerland). 14.2022, 16, 21 p., 9947.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    A New Methodological Approach to the Characterization of Optimal Charging Rates at the Hydrogen Plasma Smelting Reduction Process Part 1: Method

    Zarl, M. A., Ernst, D., Cejka, J. & Schenk, J., 7 Jul 2022, In: Materials. 15.2022, 14, 23 p., 4767.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    A New Methodological Approach on the Characterization of Optimal Charging Rates at the Hydrogen Plasma Smelting Reduction Process Part 2: Results

    Ernst, D., Zarl, M. A., Cejka, J. & Schenk, J., 8 Jun 2022, In: Materials. 15.2022, 12, 22 p., 4065.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Using Iron Ore Ultra-Fines for Hydrogen-Based Fluidized Bed Direct Reduction—A Mathematical Evaluation

    Wolfinger, T., Spreitzer, D. & Schenk, J., 1 Jun 2022, In: Materials. 15.2022, 11, 17 p., 3943.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    70 Years of LD‐Steelmaking—Quo Vadis?

    Cappel, J., Ahrenhold, F., Egger, M. W., Hiebler, H. & Schenk, J., 26 May 2022, In: Metals. 12.2022, 6, 24 p., 912.

    Research output: Contribution to journal › Review article › peer-review

  34. Published

    Hierarchical nature of hydrogen-based direct reduction of iron oxides

    Ma, Y., Souza Filho, I. R., Bai, Y., Schenk, J., Patisson, F., Beck, A., van Bokhoven, J. A., Willinger, M. G., Li, K., Xie, D., Ponge, D., Zaefferer, S., Gault, B., Mianroodi, J. R. & Raabe, D., May 2022, In: Scripta Materialia. 213.2022, May, 7 p., 114571.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Analysis of the Usability of Iron Ore Ultra-Fines for Hydrogen-Based Fluidized Bed Direct Reduction—A Review

    Wolfinger, T., Spreitzer, D. & Schenk, J., 6 Apr 2022, In: Materials. 15.2022, 7, 15 p., 2687.

    Research output: Contribution to journal › Review article › peer-review

  36. E-pub ahead of print

    Surface Morphology and Structural Evolution of Magnetite-Based Iron Ore Fines During the Oxidation

    Zheng, H., Schenk, J., Xu, R., Daghagheleh, O., Spreitzer, D., Wolfinger, T., Yang, D. & Kapelyushin, Y., 23 Mar 2022, (E-pub ahead of print) In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 53.2022, 3, p. 1644-1660 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Investigation on the influence of wood pellets on the reactivity of coke with CO2 and its microstructure properties

    Kieush, L., Schenk, J., Pfeiffer, A., Koveria, A., Rantitsch, G. & Hopfinger, H., 1 Feb 2022, In: Fuel. 309.2022, 1 February, 12 p., 122151.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Metallurgical Coke Production with Biomass Additives: Study of Biocoke Properties for Blast Furnace and Submerged Arc Furnace Purposes

    Bazaluk, O., Kieush, L., Koveria, A., Schenk, J., Pfeiffer, A., Zheng, H. & Lozynskyi, V., 1 Feb 2022, In: Materials. 15.2022, 3, 17 p., 1147.

    Research output: Contribution to journal › Article › Research › peer-review

  39. E-pub ahead of print

    Calcination Condition of Dolomite-Based Materials Influencing Static Dissolution in Synthetic Electric Arc Furnace Slag

    Lesiak, S., Cheremisina, E., Rieger, J., Schenk, J., Firsbach, F., Johnson, W., Chopin, T. & Nispel, M., 12 Jan 2022, (E-pub ahead of print) In: Steel research international. 93.2022, 5, 9 p., 2100675.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    A Comprehensive Review of Characterization Methods for Metallurgical Coke Structures

    Zheng, H., Xu, R., Zhang, J., Daghagheleh, O., Schenk, J., Li, C. & Wang, W., 1 Jan 2022, In: Materials. 15.2022, 1, 24 p., 174.

    Research output: Contribution to journal › Review article › peer-review

  41. Published

    How to increase scrap recycling

    Häuselmann, M., Rieger, J., Schenk, J., Schnitzer, R., Sakic, A., Michelic, S. K. & Cejka, J., 2022, In: Steel times international. 46.2022, 8*December, p. 34-38

    Research output: Contribution to journal › Article › Research

  42. Published

    The metallurgical requirements to control sulfur in steel with the transformation to climate-neutral steelmaking

    Schenk, J., 2022. 10 p.

    Research output: Contribution to conference › Paper

  43. 2021
  44. Published

    Influence of a Prior Oxidation on the Reduction Behavior of Magnetite Iron Ore Ultra-Fines Using Hydrogen

    Wolfinger, T., Spreitzer, D., Zheng, H. & Schenk, J., 21 Dec 2021, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science.

    Research output: Contribution to journal › Article › Research › peer-review

  45. E-pub ahead of print

    The PIOLab: Building global physical input–output tables in a virtual laboratory

    Wieland, H., Lenzen, M., Geschke, A., Fry, J., Wiedenhofer, D., Eisenmenger, N., Schenk, J. & Giljum, S., 18 Nov 2021, (E-pub ahead of print) In: Journal of industrial ecology.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Evaluation of Dissolution Rate and Behavior of MgO Carriers for Primary and Secondary Metallurgical Slags

    Cheremisina, E., Schenk, J., Viertauer, A., Nilica, R. & Roessler, R., Oct 2021, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 52, 5, p. 2939-2950 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  47. E-pub ahead of print

    Experimental determination of the MnO activity coefficient in high-manganese slags using the chemical equilibrium method

    Cheremisina, E., Gao, X., Ueda, S., Kitamura, S. Y., Yamashina, R. & Schenk, J., 26 Jul 2021, (E-pub ahead of print) In: Metals. 11.2021, 8, 13 p., 1190.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Effect of Prior Oxidation on the Reduction Behavior of Magnetite-Based Iron Ore During Hydrogen-Induced Fluidized Bed Reduction

    Zheng, H., Spreitzer, D., Wolfinger, T., Schenk, J. & Xu, R., 1 Jun 2021, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 52.2021, 4, p. 1955-1971 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  49. E-pub ahead of print

    Measurements methodologies for basic oxygen furnace cold modeling

    Gonçalves, F., Ribeiro, M. A., Correa, R., Silva, R., Braga, B., Maia, B. T., Tavares, R. P., De Carvalho, D. A. G. & Schenk, J., 4 May 2021, (E-pub ahead of print) In: Journal of Materials Research and Technology. 13.2021, July-August, p. 834-856 23 p.

    Research output: Contribution to journal › Review article › peer-review

  50. E-pub ahead of print

    Review on the Oxidation Behaviors and Kinetics of Magnetite in Particle Scale

    Zheng, H., Schenk, J., Spreitzer, D., Wolfinger, T. & Daghagheleh, O., 3 May 2021, (E-pub ahead of print) In: Steel research international.

    Research output: Contribution to journal › Review article › peer-review

  51. E-pub ahead of print

    Statistical Analysis of the Inclusions in Rare Earth-M (M = Ca and Ti) Treated Steel

    Xie, Y., Song, M., Wang, B., Zhu, H., Xue, Z., Mayerhofer, A., Michelic, S. K., Bernhard, C. & Schenk, J., 29 Apr 2021, (E-pub ahead of print) In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science.

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Evaluation of dissolution rate and behaviour of MgO carriers for primary and secondary metallurgical slags

    Cheremisina, E., Schenk, J., Viertauer, A., Nilica, R. & Rössler, R., 2021.

    Research output: Contribution to conference › Paper › peer-review

  53. Published

    Gibbs energy minimization and particle dissolution

    Ogris, D., Schenk, J. & Gamsjäger, E., 2021.

    Research output: Contribution to conference › Presentation › Research › peer-review

  54. Published

    Iron

    Schenk, J., 2021, Kirk‐Othmer Encyclopedia of Chemical Technology. John Wiley & Sons, Großbritannien, p. 1-41 41 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  55. Published

    Processing and utilization of steelmaking slags in the European Union

    Schenk, J. & Draxler, M., 2021.

    Research output: Contribution to conference › Paper › peer-review

  56. Published

    Static dissolution evaluation of dolomite-based materials in EAF-type slag

    Scheiber, S., Cheremisina, E., Rieger, J., Schenk, J., Firsbach, F., Johnson, W., Chopin, T. & Nispel, M., 2021.

    Research output: Contribution to conference › Paper › peer-review

  57. Published

    Thermodynamic and kinetic modelling of the dissolution process of lime particles in BOF slags

    Ogris, D. M., Schenk, J. & Gamsjäger, E., 2021.

    Research output: Contribution to conference › Paper › peer-review

  58. 2020
  59. Published

    K1-MET—A Success Story Since Almost 20 Years

    Rieger, J., Schenk, J., Buergler, T., Kofler, I., Schatzl, M. & Huemer, G., Dec 2020, In: Steel research international. 91.2020, 12, 4 p., 2000233.

    Research output: Contribution to journal › Article › Research › peer-review

  60. Published

    Special Issue:K1‐MET – Competence in Advanced Metallurgical and Environmental Process Development

    Schenk, J. (Guest ed.) & Bürgler, T. (Guest ed.), Dec 2020, In: Steel research international.

    Research output: Contribution to journal › Special issue › Research › peer-review

  61. Published

    A study on the stability fields of arc plasma in the hpsr process

    Zarl, M. A., Farkas, M. A. & Schenk, J., Oct 2020, In: Metals. 10.2020, 10, p. 1-22 22 p., 1394.

    Research output: Contribution to journal › Article › Research › peer-review

  62. Published

    Fluidization behavior and reducibility of iron ore fines during hydrogen-induced fluidized bed reduction

    Spreitzer, D. & Schenk, J., Oct 2020, In: Particuology. 52, p. 36-46 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  63. Published

    From henry bessemer’s invention to comprehensive converter process optimization

    Bazhin, V. Y., Schenk, J., Konovalov, G. V. & Kosovtseva, T. R., Oct 2020, In: Cvetnye metally. 2020, 10, p. 88-95 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  64. Published

    METHOD OF RECYCLING OIL-OILY-CONTAMINATED WASTES, OILY SCALE, COKE-CHEMICAL WASTES

    Хуснутдинов, И. Ш., Хуснутдинов, С. И., Алексеева, А. А., Бажин, В. Ю., Дубовиков, О. А. & Иоганн, Л. Ш., 21 Aug 2020, IPC No. F23G 5/ 027 A I, Patent No. RU2730304, Priority date 19 Mar 2019, Priority No. RU20190107878

    Research output: Patent

  65. Published

    Microstructural evolution of metallurgical coke: Evidence from Raman spectroscopy

    Rantitsch, G., Bhattacharyya, A., Günbati, A., Schulten, M-A., Schenk, J., Letofsky-Papst, I. & Albering, J., 1 Jul 2020, In: International journal of coal geology. 227.2020, 1 July, 12 p., 103546.

    Research output: Contribution to journal › Article › Research › peer-review

  66. Published

    Structural Features and Combustion Behaviour of Waste Bamboo Chopstick Chars Pyrolysed at Different Temperatures

    Xu, R., Deng, S., Wang, W., Schenk, J. & Wang, F., 1 Jun 2020, In: BioEnergy research . 13.2020, 2, p. 439-451 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  67. Published

    Tailoring the FeO/SiO2 Ratio in Electric Arc Furnace Slags to Minimize the Leaching of Vanadium and Chromium

    Neuhold, S. F., Algermissen, D., Drissen, P., Adamczyk, B., Presoly, P., Sedlazeck, K. P., Schenk, J., Raith, J., Pomberger, R. & Vollprecht, D., 1 Apr 2020, In: Applied Sciences : open access journal. 10, 7, p. 5249 17 p., 2549.

    Research output: Contribution to journal › Article › Research › peer-review

  68. E-pub ahead of print

    The effect of alkali on the reaction kinetics and strength of blast furnace coke

    Dastidar, M. G., Bhattacharyya, A., Sarkar, B. K., Dey, R., Mitra, M. K. & Schenk, J., 21 Feb 2020, (E-pub ahead of print) In: Fuel. 268.2020, May, 10 p., 117388.

    Research output: Contribution to journal › Article › Research › peer-review

  69. Published

    Slag Formation during Reduction of Iron Oxide Using Hydrogen Plasma Smelting Reduction

    Naseri Seftejani, M., Schenk, J., Spreitzer, D. & Zarl, M. A., 20 Feb 2020, In: Materials. 13.2020, 4, 24 p., 935.

    Research output: Contribution to journal › Article › Research › peer-review

  70. Published

    Novel sintering indexes to evaluate and correlate the crystal characteristics and compressive strength in magnetite pellets

    Wang, Y., Schenk, J., Zhang, J., Liu, Z., Wang, J., Niu, L. & Cheng, Q., 15 Feb 2020, In: Powder Technology. 362.2020, 15 February, p. 517-526 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  71. Published

    Effect of CO2 and O2 Mixed Injection on the Decarburization and Manganese Retention in High-Mn Twinning-Induced Plasticity Steels

    Liu, H., Liu, J., Schenk, J., Penz, F. M., Sun, L., Zhang, R. & An, Z., 3 Feb 2020, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 51.2020, 2, p. 756-762 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  72. Published

    Aktueller Stand und Perspektiven für eine CO2-freie Stahlerzeugung

    Sormann, A. & Schenk, J., Feb 2020, In: Stahl + Technik. 02, 2020, p. 32-35 4 p.

    Research output: Contribution to journal › Article › Transfer

  73. Published

    Utilization of metallurgical slag with presence of novel CaO-MgO-SiO2-Al2O3 as a composite sorbent for wastewater treatment contaminated by cerium

    Morozova, A. G., Lonzinger, T. M., Skotnikov, V. A., Sahu, J. N., Mikhailov, G. G., Schenk, J., Bhattacharyya, A. & Kapelyushin, Y., 28 Jan 2020, In: Journal of Cleaner Production. 255.2020, 9 p., 120286.

    Research output: Contribution to journal › Article › Research › peer-review

  74. Published

    Methods and technologies for the processing of water-hydrocarbon emulsions and technogenic raw materials of metallurgical and petrochemical enterprises: A review

    Khusnutdinov, S. I., Schenk, J., Khusnutdinov, I. S., Safiulina, A. F., Bazhin, V. Y. & Dubovikov, O. A., 2020, Topical Issues of Rational Use of Natural Resources 2019. Litvinenko, V. (ed.). p. 525-532 8 p. (Topical Issues of Rational Use of Natural Resources 2019; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  75. Published

    Sustainable steelmaking - A strategic evaluation of the future potential of hydrogen in the steel industry

    Skorianz, M., Engel, E. & Schenk, J., 2020, Proceedings of the Iron and Steel Technology Conference, AISTech 2020. Association for Iron and Steel Technology, AISTECH, p. 372-381 10 p. (AISTech - Iron and Steel Technology Conference Proceedings; vol. 1).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  76. 2019
  77. Published

    Gasification Characteristics and Kinetics of Unburned Pulverized Coal in Blast Furnaces

    Zan, R., Wang, W., Xu, R., Schenk, J., Zheng, H. & Wang, H., 13 Nov 2019, In: Energies. 12.2019, 22, 14 p., 4324.

    Research output: Contribution to journal › Article › Research › peer-review

  78. Published

    método e disposição para a produção de ferro gusa líquido ou produtos precursores de aço líquido

    Georg, A., Hado, H., Johann, W., Johannes, L. S., Kurt, W., Martin, S., Robert, M. & Thomas, E., 24 Sept 2019, IPC No. F27D 17/ 00 A I, Patent No. BRPI0908724, Priority date 30 Jan 2009, Priority No. WO2009EP51058

    Research output: Patent

  79. Published

    Reduction of Iron Oxides with Hydrogen–A Review

    Spreitzer, D. & Schenk, J., 18 Aug 2019, In: Steel research international. 90.2019, 10, 17 p., 1900108.

    Research output: Contribution to journal › Article › Transfer › peer-review

  80. E-pub ahead of print

    Iron Ore Reduction by Hydrogen Using a Laboratory Scale Fluidized Bed Reactor: Kinetic Investigation—Experimental Setup and Method for Determination

    Spreitzer, D. & Schenk, J., 24 Jul 2019, (E-pub ahead of print) In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 50.2019, 5, p. 2471-2484 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  81. Published

    Co-utilization of converter sludge-containing dedust wastewater in iron ore sintering to save fresh water, enhance quality and reduce pollution

    Wang, Y., Zhang, J., Liu, Z., Du, C., Schenk, J., Shao, J. & Zhang, Y., 21 Jun 2019, In: Journal of Cleaner Production. 234.2019, 10 October, p. 157-170 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  82. Published

    Characterization of coke surface using topographic and specific surface area measurement techniques

    Bhattacharyya, A., Rantitsch, G., Schenk, J., Guenbati, A., Janhsen, U. & Schulten, M., Jun 2019, METEC-ESTAD 2019 Proceedings.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  83. Published

    Reduction of Haematite Using Hydrogen Thermal Plasma

    Naseri Seftejani, M., Schenk, J. & Zarl, M. A., 16 May 2019, In: Materials. 12.2019, 10, 22 p., 1608.

    Research output: Contribution to journal › Article › Research › peer-review

  84. Published

    Structural Change of Coke During the Burden Descent in an Experimental Blast Furnace

    Bhattacharyya, A., Rantitsch, G., Wiener, J., Schenk, J., Pethke, J. & Fredriksson, U., May 2019, AISTECH 2019 Proceedings.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  85. Published

    Analytical and numerical determination of the heat transfer coefficient between scrap and hot metal based on small-scale experiments

    Penz, F. M., Tavares, R. P., Weiss, C., Schenk, J., Ammer, R., Pastucha, K. & Klösch, G., 24 Apr 2019, In: International journal of heat and mass transfer. 138.2019, August, p. 640-646 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  86. E-pub ahead of print

    Residual Processing in the European Steel Industry: A Technological Overview

    Rieger, J. & Schenk, J., 3 Apr 2019, (E-pub ahead of print) In: Journal of Sustainable Metallurgy. 5.2019, 3, p. 295-309 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  87. Published

    Evaluation of the Influences of Scrap Melting and Dissolution during Dynamic Linz–Donawitz (LD) Converter Modelling

    Penz, F. M., Schenk, J., Ammer, R., Kloesch, G. & Pastucha, K., Apr 2019, In: Processes : open access journal. 7.2019, 4

    Research output: Contribution to journal › Article › Research › peer-review

  88. Published

    A Review of Steel Scrap Melting in Molten Iron-Carbon Melts

    Penz, F. M. & Schenk, J., 1 Jan 2019, In: Steel research international. 2019, 20 p., 1900124.

    Research output: Contribution to journal › Review article › peer-review

  89. Published

    Diffusive steel scrap melting in carbon-saturated hot metal-Phenomenological investigation at the solid-liquid interface

    Penz, F. M., Schenk, J., Ammer, R., Klösch, G., Pastucha, K. & Reischl, M., 1 Jan 2019, In: Materials. 12.2019, 8, 1358.

    Research output: Contribution to journal › Article › Research › peer-review

  90. Published

    Evaluation of mixing and mass transfer at ternium Brazil's BOF through cold model experiments

    Silveira, D. C. O., Ribeiro, M. A., Salgado, R. S., Tavares, R. P., Maia, B. T., De Carvalho, D. A. G. & Schenk, J., 1 Jan 2019, Iron and Steel Technology Conference Proceedings. Vol. 2019-May. p. 979-986 8 p. (AISTech - Iron and Steel Technology Conference Proceedings).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  91. Published

    Kinetics and Mechanisms of Dolime Dissolution in Steelmaking Slag

    Cheremisina, E., Schenk, J., Nocke, L., Paul, A. & Wimmer, G., 1 Jan 2019, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 50.2019, 3, p. 1269 - 1276 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  92. Published

    Structural change of coke structure during the burden descend in an experimental blast furnace

    Bhattacharyya, A., Rantitsch, G., Wiener, J., Schenk, J., Pethke, J. & Fredriksson, U., 1 Jan 2019, Iron and Steel Technology Conference Proceedings. Vol. 2019-May. p. 263-268 6 p. (AISTech - Iron and Steel Technology Conference Proceedings).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  93. Published

    Thermodynamic Model of Ion-Exchange Process as Exemplified by Cerium Sorption from Multisalt Solutions

    Cheremisina, O. V., Schenk, J., Cheremisina, E. A. & Ponomareva, M. A., 1 Jan 2019, In: Journal of Mining Institute. 237.2019, p. 307-316 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  94. Published

    KIC RawMaterials: Iron Balance—Austria

    Wolfinger, T., Spreitzer, D., Zarl, M., Pichler, A. & Schenk, J., 2019, In: Berg- und hüttenmännische Monatshefte : BHM. 164.2019, 4, p. 183 - 187 5 p.

    Research output: Contribution to journal › Article › Research

  95. Published

    Microstructural Evolution of Blast Furnace Coke During Experimental Heating —The IFORS Approach

    Rantitsch, G., Bhattacharyya, A. & Schenk, J., 2019, In: Berg- und hüttenmännische Monatshefte : BHM. 2019, 130, p. 1 - 4 4 p.

    Research output: Contribution to journal › Article › Research

  96. 2018
  97. Published

    Dissolution of Scrap in Hot Metal under Linz-Donawitz (LD) Steelmaking Conditions

    Penz, F. M., Schenk, J., Ammer, R., Kloesch, G. & Pastucha, K., 18 Dec 2018, In: Metals : open access journal . 8.2018, 1078, 9 p., 1078.

    Research output: Contribution to journal › Article › Research › peer-review

  98. Published

    Thermodynamic of Liquid Iron Ore Reduction by Hydrogen Thermal Plasma

    Naseri Seftejani, M. & Schenk, J., 11 Dec 2018, In: Metals : open access journal . 8, 12, 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  99. Published

    Abrasiveness of mining slurries: influence of the morphology, concentration of slurries, mean grain size and nature of the abrasive particles

    Moreira, V. E. S., Silva, F. C., Quintao, V. M., Siqueira, F., Kaelber, F., Meinhold, S., Schenk, J. & Rodrigues da Costa, A., 3 Dec 2018.

    Research output: Contribution to conference › Paper › peer-review

  100. Published

    Dissolution behaviour of ULC steel in carbon saturated hot metal

    Penz, F. M., Schenk, J., Ammer, R., Pastucha, K. & Maunz, B., Dec 2018, In: Metallurgia Italiana. 110.2018, 11-12, p. 36-45 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  101. Published

    Influence of Iron Minerals on the Volume, Strength, and CO2 Gasification of Ferro-coke

    Xu, R., Zheng, H., Wang, W., Schenk, J. & Xue, Z., Dec 2018, In: Energy and Fuels. 32, 12, p. 12118-12127

    Research output: Contribution to journal › Article › Research › peer-review

  102. Published

    Experimental determination of the strength and reactivity of lumpy and briquetted chars from non-coking coals under melter-gasifier conditions

    Bhattacharyya, A., Schenk, J. & Heckmann, H., 26 Nov 2018, In: Ironmaking and steelmaking. 45, 10, p. 907-912

    Research output: Contribution to journal › Article › Research › peer-review

  103. Published

    Freisetzungsbestimmende Mechanismen von Schwermetallen in Stahlwerksschlacken - Analyse, Modellierung, Synthesen

    Neuhold, S. F., Vollprecht, D., Presoly, P., Schenk, J. & Adamczyk, B., 7 Nov 2018, Recy & DepoTech 2018: Vorträge-Konferenzband. Leoben, p. 135-140 122

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  104. Published

    Transport Properties of HPSR Gases

    Naseri Seftejani, M. & Schenk, J., 24 Oct 2018, The Chinese Society for Metals.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  105. Published

    Guest Editorial - EUROMAT 2017 Symposia on Processing

    Kaban, I., Agathopoulos, S., Valenza, F., Sommitsch, C., Schenk, J., Papaefthymiou, S. & Karantzalis, A., Oct 2018, In: Journal of Materials Engineering and Performance. 27.2018, 10, p. 4981-4982

    Research output: Contribution to journal › Editorial › peer-review

  106. Published

    Effect of the Particle Size of Iron Ore on the Pyrolysis Kinetic Behaviour of Coal-Iron Ore Briquettes

    Zheng, H., Wang, W., Xu, R., Zan, R., Schenk, J. & Xue, Z., 29 Sept 2018, In: Energies : open-access journal of related scientific research, technology development and studies in policy and management. 11, 10, 16 p., 2595.

    Research output: Contribution to journal › Article › Research › peer-review

  107. Published

    THERMODYNAMIC ASPECTS OF HYDROGEN PLASMA SMELTING REDUCTION OF IRON OXIDES

    Naseri Seftejani, M. & Schenk, J., 20 Sept 2018, Austrian Society for Metallurgy and Materials: ASMET. ASMET

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  108. Published

    MICROSTRUCTURAL EVOLUTION OF BLAST FURNACE COKE DURING EXPERIMENTAL HEATING – THE IFORS APPROACH

    Rantitsch, G., Bhattacharyya, A. & Schenk, J., Sept 2018, Proceedings of 8th International Congress on Science and Technology of Ironmaking.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  109. Published

    STRUCTURAL CHARACTERIZATION OF COKE FROM THE TUYERE REGION OF THE BLAST FURNACE

    Bhattacharyya, A., Rantitsch, G., Schenk, J., Janhsen, U. & Guenbati, A., Sept 2018, Proceedings of 8th International Congress on Science and Technology of Ironmaking.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  110. Published

    Kinetics of molten iron oxides reduction using hydrogen

    Naseri Seftejani, M. & Schenk, J., Jul 2018, In: Metallurgia Italiana. n. 7/8 2018, 0026-0843, p. 5-14 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  111. Published

    DISSOLUTION BEHAVIOUR OF ULC STEEL IN CARBON SATURATED HOT METAL

    Penz, F. M., Schenk, J., Ammer, R., Pastucha, K. & Maunz, B., 13 Jun 2018, p. ICS070. 12 p.

    Research output: Contribution to conference › Paper › peer-review

  112. Published

    The way to a carbon free steelmaking

    Sormann, A., Schenk, J., Naseri Seftejani, M., Zarl, M. A. & Spreitzer, D., 10 Jun 2018.

    Research output: Contribution to conference › Paper › peer-review

  113. Published

    Modelling the dependence of sinter bed permeability on sinter porosity and structure

    Höftberger, A., Bhattacharyya, A., Schenk, J., Weiß, C., Schaffer, C. & Schuster, E., Jun 2018, Proceedings of ADMET 2018.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  114. Published

    Characterization of Ironmaking Raw Materials Using Computed Tomography

    Bhattacharyya, A., Schenk, J., Habe, D. & Oberdorfer, B., May 2018, AISTECH 2018 Proceedings. p. 211 216 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  115. Published

    Evolution of Metallurgical Properties and Microstructures of Lump Coal During the Descending Process in COREX Gasifier

    Xu, R., Zheng, H., Wang, W., Schenk, J., Bhattacharyya, A., Xue, Z. & Song, M., 18 Apr 2018, In: International journal of coal preparation and utilization. p. 1-17 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  116. Published

    Investigation of the content hexavalent chromium occurred in slags during steel making process

    Cheremisina, E. & Schenk, J., 1 Apr 2018, In: Ćernye metally : dvuchnedel'nyj proizvodstvenno-techničeskij žurnal po problemam černoj metallurgii . 4, p. 11-12 2 p.

    Research output: Contribution to journal › Article › Research › peer-review

  117. Published

    Gasification Reactivity and Structure Evolution of Metallurgical Coke under H2O/CO2 Atmosphere

    Xu, R., Dai, B., Wang, W., Schenk, J., Bhattacharyya, A. & Xue, Z., 15 Feb 2018, In: Energy and Fuels. 32, 2, p. 1188-1195 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  118. Published

    Fundamentals of hydrogen plasma smelting reduction (HPSR) of iron oxides, a new generation of steelmaking processes

    Naseri Seftejani, M. & Schenk, J., 6 Feb 2018.

    Research output: Contribution to conference › Paper › peer-review

  119. Published

    Analysis of the Alkali Flow in Ironmaking Reactors by a Thermochemical Approach: Blast Furnace

    Pichler, A., Hauzenberger, F., Schenk, J., Stocker, H. & Thaler, C., 1 Feb 2018, In: Steel research international. 89, 2, 1700303.

    Research output: Contribution to journal › Article › Research › peer-review

  120. Published

    Effect of iron ore type on the thermal behaviour and kinetics of coal-iron ore briquettes during coking

    Xu, R., Dai, B., Wang, W., Schenk, J. & Xue, Z., 12 Jan 2018, In: Fuel Processing Technology. 173.2018, May, p. 11-20 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  121. Published

    Dissolution rate of various MgO materials in steel and secondary metallurgy slags

    Cheremisina, E., Schenk, J., Viertauer, A., Nilica, R. & Roessler, R., 1 Jan 2018, AISTech 2018 Proceedings - Iron and Steel Technology Conference and Exposition. Association for Iron and Steel Technology, AISTECH, Vol. 2018-May. p. 1103-1115 13 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  122. Published

    Kinetics of hydrogen plasma smelting reduction of iron oxides

    Seftejani, M. N. & Schenk, J., 1 Jan 2018, ICS 2018 - 7th International Congress on Science and Technology of Steelmaking: The Challenge of Industry 4.0. Associazione Italiana di Metallurgia

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  123. 2017
  124. Published

    TOWARDS CO2 LEAN IRONMAKING – A REASONABLE WAY FOR INDIA´S STEEL INDUSTRY

    Schenk, J., 11 Dec 2017, 3rd nternational Conference on Science and Technology of Ironmaking & Steelmaking. Kanpur, India

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  125. Published

    Calculation Model to Quantify the Amount of Carry-Over Slag From Primary Metallurgical Plants

    Schnalzger, G., Bundschuh, P., Rössler, R., Schenk, J. & Viertauer, A., Dec 2017, In: Bulletin. The Journal of Refractory Innovations. 1, Autumn, p. 76 - 81 6 p.

    Research output: Contribution to journal › Article › Research

  126. Published

    Chromium Stability in Steel Slags

    Cheremisina, E. & Schenk, J., Nov 2017, In: Steel research international. 88.2017, 11, 7 p., 1700206.

    Research output: Contribution to journal › Article › Research › peer-review

  127. Published

    Kein sechswertiges Chrom in Stahlwerksschlacken

    Cheremisina, E. & Schenk, J., Aug 2017, In: Stahl und Eisen. 137, 8, p. 33-34 2 p.

    Research output: Contribution to journal › Letter

  128. Published

    BOCAL PARA A INJEÇÃO DE GÁS CONTENDO OXIGÊNIO EM UM DISPOSITIVO DE FERRO GUSA DOTADO DE UM TUBO DE INSERÇÃO INJETOR

    Stefan, L., Marinko, L-N., Georg, A., Franz, B., Johannes, L. S., Martin, S., Thomas, S., Bogdan, V., Wieder, K. & Wurm, J., 11 Jul 2017, IPC No. F27D 3/ 16 A I, Patent No. BRPI0922727, Priority date 5 Nov 2009, Priority No. WO2009EP64685

    Research output: Patent

  129. Published

    Effect of Scrap Composition on the Thermodynamics and Kinetic Modelling of BOF Converter

    Penz, F. M., Bundschuh, P., Schenk, J., Pastucha, K., Panhofer, H. & Paul, A., 11 Jun 2017, p. 1-10. 10 p.

    Research output: Contribution to conference › Paper › peer-review

  130. Published

    INVESTIGATION OF THE SPECIFIC SURFACE AREA AND PORE STRUCTURE OF BLAST FURNACE SINTERS

    Bhattacharyya, A., Schenk, J., Schaffer, C., Schadler, S. & Schuster, E., Jun 2017, European Steel Technology and Application Days ESTAD 2017: Conference Proceedings.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  131. Published

    The Effect of H2O on the Reactivity and Microstructure of Metallurgical Coke

    Wang, W., Bowen, D., Xu, R., Schenk, J., Wang, J. & Xu, Z., 24 May 2017, In: Steel research international. 88.2017, 8, p. 1-9 9 p., 1700063.

    Research output: Contribution to journal › Article › Research › peer-review

  132. Published

    Calculation model to quantify the amount of carry-over slag from primary metallurgical aggregates

    Schnalzger, G., Bundschuh, P., Rössler, R., Schenk, J. & Viertauer, A., 11 May 2017, Proceedings of ISDM Conference 2017. p. 1-8 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  133. Published

    Influence of Magnesium Oxide content on kinetics of lime dissolution in steelmaking slags

    Cheremisina, E., Schenk, J., Ludwig, N., Paul, A. & Wimmer, G., 17 Jan 2017, In: ISIJ international. 57.2017, 2, p. 304-313 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  134. Published

    A holistic approach for the characterization of coke for optimized usage in the blast furnace ironmaking process

    Bhattacharyya, A. & Schenk, J., 2017.

    Research output: Contribution to conference › Paper › peer-review

  135. Published

    Möglichkeiten und Grenzen von Modellen zur Vorhersage der Auslaugbarkeit von Stahlwerksschlacken

    Höllen, D., Neuhold, S., Mudersbach, D., Schüler, S., Sommerauer, H., Griessacher, T., Dijkstra, J., van Zomeren, A., Presoly, P., Schenk, J. & Pomberger, R., 2017, Mineralische Nebenprodukte und Abfälle: Aschen, Schlacken, Stäube und Baurestmassen. Vol. 4. p. 205-222

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  136. Published

    Optimization of Coal Briquettes for Lower Reactivity and Higher Strength under Melter-gasifier Conditions

    Bhattacharyya, A., Heckmann, H., Schenk, J. & Wurm, J., 2017.

    Research output: Contribution to conference › Paper › peer-review

  137. 2016
  138. Published

    Experimental Simulation of the Interaction of Slag and Hot Metal with Coke at the Bosh Region of Blast Furnace

    Bhattacharyya, A., Schenk, J., Jäger, M., Stocker, H. & Thaler, C., Dec 2016, In: Berg- und hüttenmännische Monatshefte : BHM. p. 1-6

    Research output: Contribution to journal › Article › Research

  139. Published

    Evaluation of the Potential for Reduction of CO2 Emissions at the Secondary Metallurgy

    Gerasev, A., Bundschuh, P., Schenk, J., Viertauer, A., Trummer, B., Arth, G., Rössler, R. & Reisinger, P., 1 Nov 2016, In: RHI bulletin : the journal of refractory innovations. 2016, 1, p. 28-34 7 p.

    Research output: Contribution to journal › Article › Research

  140. Published

    Thermodynamische Modellierung der Schlackenfahrweise in der Sekundärmetallurgie

    Penz, F., Bundschuh, P., Griessacher, T. & Schenk, J., 13 Oct 2016, Schlacken-Symposium 2016: Kreislaufwirtschaft stabil weiter entwickeln. p. 153-166 14 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  141. Published

    Hydrogen as Reducing Agent in Ironmaking and Steemaking - Status, Potentials, Challenges

    Schenk, J., 4 Oct 2016.

    Research output: Contribution to conference › Presentation › Research

  142. Published

    ANALYSIS OF THE ALKALI DISTRIBUTION IN IRONMAKING REACTORS BY THERMOCHEMICAL MODELLING

    Pichler, A., Schenk, J., Hauzenberger, F., Stocker, H. & Thaler, C., Sept 2016, 7TH EUROPEAN COKE AND IRONMAKING CONGRESS - ECIC 2016, Proceedings.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  143. Published

    EVALUATION OF THE CAPABILITIES OF DIRECT AND SMELTING REDUCTION PROCESSES TO ENHANCE THE ENERGY EFFICIENCY AND TO REDUCE THE CO2 EMISSION OF THE STEEL PRODUCTION IN EUROPE

    Schenk, J. & Lüngen, H-B., Sept 2016, 7TH EUROPEAN COKE AND IRONMAKING CONGRESS - ECIC 2016, Proceedings. Linz

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  144. Published

    Experimental Simulation of the Interaction of Slag and Hot Metal with Coke at the Bosh Region of Blast Furnace

    Bhattacharyya, A., Schenk, J., Jäger, M., Stocker, H. & Thaler, C., Sept 2016, 7th European Coke and Ironmaking Conference Proceedings.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  145. Published

    Hydrogen as Reducing Agent in Iron and Steel Production - Status, Potentials, Challenges

    Schenk, J., 22 Jun 2016.

    Research output: Contribution to conference › Presentation › Transfer

  146. Published

    Determination of the specific surface area of cokes and chars for simulated process conditions of blast furnace and smelting reduction routes

    Bhattacharyya, A., Schenk, J., Thaler, C. & Stocker, H., Jun 2016, SCANMET V Proceedings.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  147. Published

    Influence of slag properties on the alkali-cycle of a blast furnace

    Pichler, A., Schenk, J., Hauzenberger, F., Stocker, H. & Thaler, C., 16 May 2016, Proceedings of the AISTech 2016. p. 341-352

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  148. Published

    Effect of Alkaline Elements on Coke Structure under Blast Furnace Process Conditions

    Bhattacharyya, A., Schenk, J., Letofsky-Papst, I. & Albering, J., May 2016, Effect of Alkaline Elements on Coke Structure under Blast Furnace Process Conditions.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  149. Published

    Reduction Behavior and Structural Evolution of Iron Ores in Fluidized Bed Technologies—Part 2: Characterization and Evaluation of Worldwide Traded Fine Iron Ore Brands

    Pichler, A., Mali, H., Plaul, J. F., Schenk, J., Skorianz, M. & Weiss, B., May 2016, In: Steel research international. 87.2016, 5, p. 642-652 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  150. Published

    método para remover co2 de gases de descarga, tais como gases de descarga de plantas para produzir ferro bruto ou gases de descarga de plantas de gás síntese

    Jan-Friedemann, P., Johannes, L. S., Kurt, W. & Robert, M., 26 Apr 2016, IPC No. C01B 32/ 50 A I, Patent No. BR112012005539, Priority date 7 Sept 2010, Priority No. WO2010EP63099

    Research output: Patent

  151. Published

    Study on Oxide Inclusion Dissolution in Secondary Steelmaking Slags using High Temperature Confocal Scanning Laser Microscopy

    Michelic, S., Goriupp, J., Feichtinger, S., Kang, Y-B., Bernhard, C. & Schenk, J., Jan 2016, In: Steel research international. 87, 1, p. 57-67

    Research output: Contribution to journal › Article › Research › peer-review

  152. Published

    Einfluss der sekundärmetallurgischen Schlackenchemie auf das Auflösungsverhalten von Al2O3 und MA-Spinell Partikeln in ausgewählten Laborversuchen

    Goriupp, J., Schenk, J., Klösch, G. & Alexander, P., 2016, In: Berg- und hüttenmännische Monatshefte : BHM. 161, 3, p. 102 107 p.

    Research output: Contribution to journal › Article › Research

  153. 2015
  154. Published

    processo e dispositivo para a separação de substância sólidas em formato de partículas de uma corrente de gás

    Johannes, L. S., Norbert, R., Robert, M. & Thomas, E., 15 Dec 2015, IPC No. B01D 50/ 00 A I, Patent No. BRPI0919875, Priority date 29 Sept 2009, Priority No. WO2009EP62605

    Research output: Patent

  155. Published

    método e dispositivo para operação de um processo de redução de fundição

    Johannes, L. S., Kurt, W. & Robert, M., 8 Dec 2015, IPC No. F02C 6/ 00 A I, Patent No. BRPI0919615, Priority date 29 Sept 2009, Priority No. WO2009EP62607

    Research output: Patent

  156. Published

    processo para a produção de aglomerados de condutores de ferro finamente particulados

    Hado, H., Hans, H. S., Johannes, L. S. & Christian, B., 1 Dec 2015, IPC No. C22B 5/ 14 A I, Patent No. BRPI0918140, Priority date 17 Aug 2009, Priority No. WO2009EP60609

    Research output: Patent

  157. Published

    Behavior of Chromium, Nickel, Lead, Zinc, Cadmium, and Mercury in the Blast Furnace - A Critical Review of Literature Data and Plant Investigations

    Trinkel, V., Mallow, O., Thaler, C., Schenk, J., Rechberger, H. & Fellner, J., 19 Nov 2015, In: Industrial and engineering chemistry research. 54, 47, p. 11759-11771 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  158. Published

    Evaluation of the capabilities of direct and smelting reduction processes to enhance the energy efficiency of the steel production in Europe

    Schenk, J., 12 Nov 2015.

    Research output: Contribution to conference › Presentation › Research

  159. Published

    Wasserstoff als Reduktionsmittel für die Eisen‐ und Rohstahlerzeugung – Ist‐Situation, Potentiale und Herausforderungen

    Schenk, J., 11 Nov 2015.

    Research output: Contribution to conference › Presentation › Research

  160. Published

    aparelho para remover o co2 dos gases de exaustão de usinas para produção de ferro gusa.

    Johannes, L. S. & Robert, M., 3 Nov 2015, IPC No. C21B 13/ 00 A I, Patent No. BR212012005399U, Priority date 6 Sept 2010, Priority No. WO2010EP63023

    Research output: Patent

  161. Published

    Untersuchung des Auflöseverhaltens oxidischer Einschlüsse in CaO-Al2O3-SiO2-MgO Schlacken mittels Hochtemperatur-Laser-Scanning Konfokalmikroskopie

    Michelic, S., Goriupp, J., Feichtinger, S., Kang, Y-B., Bernhard, C. & Schenk, J., 2 Nov 2015.

    Research output: Contribution to conference › Presentation › Research

  162. Published

    método para o controle de um processo de transformação

    Bernhard, H. S., Franz, W., Harald, F., Heinrich, R. M., Johannes, L. S., Kurt, W. & Stefan, S., 27 Oct 2015, IPC No. C21B 5/ 00 A I, Patent No. BRPI0915069, Priority date 7 May 2009, Priority No. WO2009EP55545

    Research output: Patent

  163. Published

    Effect of variable process conditions on the reactivity, strength and structural features of blast furnace cokes

    Bhattacharyya, A., Rantitsch, G., Schenk, J., Thaler, C. & Stocker, H., 5 Oct 2015, p. 606-607.

    Research output: Contribution to conference › Paper › peer-review

  164. Published

    Kinetics of lime dissolution in steelmaking slags

    Cheremisina, E., Schenk, J., Tappeiner, T., Sormann, A. & Wimmer, G., 5 Oct 2015, Asia Steel International Conference 2015 Proceedings. 2 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  165. Published

    CHALLENGES AND LIMITING FACTOS FOR THE RECYCLING OF STEEL SCRAP IN EUROPE

    Bundschuh, P. & Schenk, J., 1 Oct 2015, MINING THE TECHNOSPHERE: "Drivers and Barriers, Challenges and Opportunities". Lederer, J., Laner, D., Rechberger, H. & Fellner, J. (eds.). 1 ed. Wien, Vol. 1. p. 131-135 5 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  166. Published

    Contribution of the Chair of Ferrous Metallurgy at the Montanuniversitaet Leoben to Enhance the Sustainability of Steel Production and Application

    Schenk, J., Bernhard, C. & Michelic, S., Oct 2015, In: Berg- und hüttenmännische Monatshefte : BHM. 160, 10, p. 489-494

    Research output: Contribution to journal › Article › Research › peer-review

  167. Published

    Reduction Behavior and Structural Evolution of Iron Ores in Fluidized Bed Technologies. Part 1: Method for the Determination

    Skorianz, M., Mali, H., Pichler, A., Plaul, F., Schenk, J. & Weiss, B., 28 Sept 2015, In: Steel research international. 87, 5, p. 633-641 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  168. Published

    MODEL DEVELOPMENT OF ADDITIVES DISSOLUTION IN THE BOF PROCESS

    Godinho de Carvalho, D. A., Schenk, J. & Adilson Castro, J., 17 Aug 2015, Conference Proceedings ABM Week, August 17th-21st, 2015, Rio de Janeiro, RJ, Brazil.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  169. Published

    Characterization of Ferrous Burden Material for Use in Ironmaking Technologies/Charakterisierung stuckiger Eisentrager fur den Einsatz in der Eisenerzeugung

    Hanel, M., Schenk, J. F., Mali, H., Hauzenberger, F., Thaler, C. M. & Stocker, H., 1 Jul 2015, In: Berg- und hüttenmännische Monatshefte : BHM. 160, 7, p. 316-319 4 p.

    Research output: Contribution to journal › Article › Research

  170. Published

    Gas Purging Benefits in the BOF: A Focus on Material Efficiency and CO2 Emission Reduction

    Kollmann, T., Bundschuh, P., Samm, V., Schenk, J. & Kirschen, M., 17 Jun 2015, Procdeedings 2nd European Steel Technology and Application Days ESTAD. Düsseldorf, p. 1-7 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  171. Published

    Effect of Interaction Area on the Thermodynamics and Kinetic Modelling of BOF Converter

    Bundschuh, P., Schenk, J., Schütt, S., Sormann, A. & Panhofer, H., 12 May 2015, Proceedings of The 6th International Congress on the Science and Technology of Steelmaking. p. 151 - 154 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  172. Published

    Chemistry vs. Morphology vs. Reducibility — Some (Non-) Existing Correlations

    Hanel, M., Kain-Bückner, B., Schenk, J., Mali, H., Hauzenberger, F., Thaler, C. & Stocker, H., 4 May 2015, AISTech 2015 & ICSTI Proceedings. p. 593-602 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  173. Published

    Experimental Analysis of the Interfacial Wetting Phenomena Between Slag and Coke Surface Under Simulated Conditions of the Bosh Region of Blast Furnace

    Bhattacharyya, A., Schenk, J., Arth, G., Stocker, H. & Thaler, C., 4 May 2015, AISTech 2015 & ICSTI Proceedings. p. 713-721 077_30431-5159

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  174. Published

    Gas purging benefits in the BOF: A focus on material efficiency and CO2 emission reduction

    Kollmann, T., Bundschuh, P., Samm, V., Schenk, J. & Kirschen, M., 1 Jan 2015, AISTech 2015 - Proceedings of the Iron and Steel Technology Conference and ICSTI 2015. Vol. 2. p. 2031-2040 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  175. Published

    Impact of different heat capacity functions on thermodynamic and kinetic modeling of the basic oxygen furnace

    Bundschuh, P., Schenk, J., Schütt, S., Panhofer, H. & Sormann, A., 1 Jan 2015, AISTech 2015 - Proceedings of the Iron and Steel Technology Conference and ICSTI 2015. Association for Iron and Steel Technology, AISTECH, Vol. 2. p. 2090-2098 9 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  176. Published

    Effect of alkaline elements on the reactivity, strength and structural properties of blast furnace cokes

    Bhattacharyya, A., Schenk, J., Rantitsch, G., Thaler, C. & Stocker, H., 2015, In: Metalurgija : casopis Izdaje Tehnoloski Fakultet Sveucilista u Zagrebu, Odjeli u Sisku, Institut za Metalurgiju i Zeljezara Sisak = Metallurgy. 54, 3, p. 503-506

    Research output: Contribution to journal › Article › Research › peer-review

  177. Published

    Gas Purging Benefits in the BOF: A Focus on Material Efficiency and CO2 Emission Reduction

    Kollmann, T., Bundschuh, P., Samm, V., Schenk, J. & Kirschen, M., 2015, In: RHI bulletin : the journal of refractory innovations. 1, p. 37-42 6 p.

    Research output: Contribution to journal › Article › Research

  178. Published

    Standardized Iron Ore Characterization Methodology for Metallurgy

    Kolb, F., Mali, H., Pichler, A. & Schenk, J., 2015, In: Practical metallography = Praktische Metallographie. 52, p. 5-20

    Research output: Contribution to journal › Article › Research › peer-review

  179. Published

    Thermochemical modelling of the alkali balance in modern blast furnaces

    Pichler, A., Schenk, J., Hauzenberger, F., Thaler, C. & Stocker, H., 2015, ASIA Steel International Conference 2015 - Proceedings. 7A-7: Iron and Steel Institute of Japan

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  180. 2014
  181. Published

    PROCESSO E DISPOSITIVO PARA PRODUÇÃO DE MATERIAL FUNDIDO

    Franz, H., Johannes, S., Martin, S., Bogdan, V., Kurt, W., Johann, W., Robert, M. & Norbert, R., 29 Apr 2014, IPC No. C21B 13/ 00 A I, Patent No. BRPI0719882, Priority date 1 Oct 2007, Priority No. WO2007EP08515

    Research output: Patent

  182. Published

    PROCESSO E DISPOSITIVO PARA PRODUÇÃO DE MATERIAL FUNDIDO

    Franz, H., Robert, M., Norbert, R., Johannes, S., Martin, S., Bogdan, V., Kurt, W. & Johann, W., 15 Apr 2014, IPC No. C21B 13/ 14 A I, Patent No. BRPI0719172, Priority date 1 Oct 2007, Priority No. WO2007EP08514

    Research output: Patent

  183. Published

    Editorial

    Kepplinger, W. & Schenk, J., 1 Apr 2014, In: Steel research international. 85, 4, 1 p.

    Research output: Contribution to journal › Editorial › peer-review

  184. Published

    Assessing the quality of metallurgical coke by Raman Spectroscopy

    Rantitsch, G., Bhattacharyya, A., Schenk, J. & Lünsdorf, K., 2014, In: International journal of coal geology. 130, p. 1-7

    Research output: Contribution to journal › Article › Research › peer-review

  185. Published

    Behaviour of chars from non-coking coals under different conditions of smelting reduction processes

    Bhattacharyya, A., Schenk, J., Rantitsch, G. & Heckmann, H., 2014, Proceedings of 4th VDEh-CSM Conference on Metallurgical Fundamentals. p. 58-65

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  186. Published

    Characterization and assessment of lump COREX® chars under various process conditions

    Bhattacharyya, A., Schenk, J., Rantitsch, G. & Heckmann, H., 2014, ESTAD and JSI 2014 - Abstract Booklet. p. 324-325

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  187. Published

    Dissolution behavior of CaO in BOF-process and its effect on the kinetics of metallurgical reactions

    Bundschuh, P., Schenk, J., Hiebler, M., Panhofer, H., Sormann, A. & Klösch, G., 2014, Seminar on Metallurgical Fundamentals. p. 106-118

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  188. Published

    Effect of alkaline elements on the reactivity, strength and structural properties of blast furnace cokes

    Bhattacharyya, A., Schenk, J., Rantitsch, G., Thaler, S. & Stocker, H., 2014, Proceedings of SHMD 2014. p. 412-412

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  189. Published

    Image analysis for evaluation of iron ore carriers

    Kain-Bückner, B., Mali, H., Schenk, J., Hanel, M., Thaler, C., Stocker, H. & Hauzenberger, F., 2014, Sonderbände der Praktischen Metallographie 46. p. 215-218

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  190. Published

    Influence of CaO dissolution on the kinetics of metallurgical reactions in BOF-process

    Bundschuh, P., Schenk, J., Hiebler, M., Panhofer, H. & Sormann, A., 2014, Influence of CaO dissolution on the kinetics of metallurgical reactions in BOF-process. p. 89-100

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  191. Published

    Influence of alkalis on mechanical properties of lumpy iron carriers during reduction

    Pichler, A., Schenk, J., Hanel, M., Mali, H., Thaler, C., Hauzenberger, F. & Stocker, H., 2014, Conference Proceedings to the 23rd International Conference on Metallurgy and Materials. p. 40-40

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  192. Published

    Reducibility of a Hematitic Lump Ore at different near Blast Furnace Conditions

    Hanel, M., Schenk, J., Mali, H., Hauzenberger, F., Thaler, C. & Stocker, H., 2014, 1st ESTAD & 31st JSI . p. 1-2

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  193. Published

    Thermochemical Calculation of the Quaternary CaO–SiO2–Al2O3–MgO System at 1600°C for Predicting the MgO-Saturation and MgO–MgO · Al2O3 Equilibrium of Secondary Metallurgical Slag

    Goriupp, J., Schenk, J., Klösch, G. & Hiebler, M., 2014, In: Steel research international. 85, p. 564-569

    Research output: Contribution to journal › Article › Research › peer-review

  194. Published

    Thermodynamic and Kinetic Model of the Converter Steelmaking Process. Part 1: The Description of the BOF Model

    Lytvynyuk, Y., Schenk, J., Hiebler, M. & Sormann, A., 2014, In: Steel research international. 85, p. 537-543

    Research output: Contribution to journal › Article › Research › peer-review

  195. Published

    Thermodynamic and Kinetic Model of the Converter Steelmaking Process. Part 2: The Model Validation

    Lytvynyuk, Y., Schenk, J., Hiebler, M. & Sormann, A., 2014, In: Steel research international. 85, p. 544-563

    Research output: Contribution to journal › Article › Research › peer-review

  196. 2013
  197. Published

    Application of Thermodynamic and Kinetic Model for Converter Steelmaking to Optimize Manganese Yield in Crude Steel

    Lytvynyuk, Y., Schenk, J., Hiebler, M., Mizelli, H. & Sormann, A., 2013, In: Berg- und hüttenmännische Monatshefte : BHM. p. 457-458

    Research output: Contribution to journal › Article › Research › peer-review

  198. Published

    Characterization of Different Lump Ore Brands According to Industrial Scale Process Conditions by Means of Reducibility Testing and Morphological Investigation

    Hanel, M., Skorianz, M., Schenk, J., Mali, H., Hauzenberger, F., Stocker, H. & Thaler, C., 2013, AISTech 2013 Proceedings. p. 447-456

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  199. Published

    Characterization of burden material for ironmaking by means of reduction tests with morphological characterization

    Hanel, M., Mali, H., Thaler, C., Stocker, H., Hauzenberger, F., Skorianz, M. & Schenk, J., 2013, The ISIJ-VDEh-Jernkontoret Joint Symposium. p. 145-153

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  200. Published

    Charakterisierung von Rohmaterialien für die Eisenerzherstellung mit Bildverarbeitung

    Hanel, M., Kain-Bückner, B., Schenk, J., Hauzenberger, F., Stocker, H. & Thaler, C., 2013, In: Berg- und hüttenmännische Monatshefte : BHM. 158, p. 445-446

    Research output: Contribution to journal › Article › Research › peer-review

  201. Published

    Das Auflösungsverhalte von Al2O3 und MgO*Al2O3 Partikeln mit definierter Oberfläche in hoch MgO-hätligen sekundärmetallurgischen Pfannenschlacken

    Goriupp, J. & Schenk, J., 2013, In: Berg- und hüttenmännische Monatshefte : BHM. p. 468-469

    Research output: Contribution to journal › Article › Research › peer-review

  202. Published

    Enhancement of Efficiency in Crude Iron Production Using an Increased Amount of Pellet Feed

    Schmidt, L., Köpplmayr, D., Plaul, F. & Schenk, J., 2013, In: Berg- und hüttenmännische Monatshefte : BHM. 158, p. 449-450

    Research output: Contribution to journal › Article › Research › peer-review

  203. Published

    Structural Characterization of Metallurgical Coke by Raman Spectroscopy

    Rantitsch, G., Schenk, J., Lünsdorf, K., Bhattacharyya, A., Hanel, M., Wallner, D. & Kaltenböck, H., 2013, In: Berg- und hüttenmännische Monatshefte : BHM. 158, p. 447-448

    Research output: Contribution to journal › Article › Research › peer-review

  204. 2012
  205. Published

    Sind Direktreduktions- und Schmelzreduktionsverfahren Optionen für eine zukünftige effiziente Stahlerzeugung in Europa?

    Schenk, J., 8 Nov 2012.

    Research output: Contribution to conference › Presentation › Research

  206. Published

    Verfahren und Vorrichtung zur Herstellung von zumindest teilweise reduzierten Metallerzen und/oder Metallen

    Schenk, J., Eder, T., Hauzenberger, F. & Millner, R., 15 Mar 2012, Patent No. A795/2010

    Research output: Patent

  207. Published

    Integration of the blast furnace route and the FINEX ®- process for low CO 2 hot metal production

    Thaler, C., Tappeiner, T., Schenk, J. L., Kepplinger, W. L., Plaul, J. F. & Schuster, S., 1 Feb 2012, In: Steel research international. 83, 2, p. 181-188 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  208. Published

    Classification of fine ores regarding their reducibility with tests in a lab scale fluidized bed reactor and petrographical analysis

    Skorianz, M., Mali, H., Schenk, J., Plaul, J. F. & Thaler, C., 2012, AIST 2012 Proceedings. p. 531-542

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  209. Published

    Comparison of Basic Oxygen Furnace Bottom Gas Purging Options

    Kollmann, T., Jandl, C., Schenk, J., Mizelli, H., Höfer, W., Viertauer, A. & Hiebler, M., 2012, In: RHI bulletin : the journal of refractory innovations. 1, p. 8-15

    Research output: Contribution to journal › Article › Research › peer-review

  210. Published

    Dynamic Refractory Wear Test Method for Magnesia-Carbon Products

    Goriupp, J., Rief, A. & Schenk, J., 2012, In: RHI bulletin : the journal of refractory innovations. 1, p. 58-62

    Research output: Contribution to journal › Article › Research › peer-review

  211. Published

    Evaluation of reducibility of iron ore fines by reduction tests under fluidized bed conditions and petrographical investigations

    Skorianz, M., Mali, H., Schenk, J., Plaul, J. F., Weiss, B. & Hanel, M., 2012, Proceedings of Asia Steel Conference 2012. p. 000-000

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  212. Published

    Integration of the Blast Furnace Route and the FINEX-Process for Low CO2 Hot Metal Production

    Thaler, C., Tappeiner, T., Schenk, J., Kepplinger, W., Plaul, J. F. & Schuster, S., 2012, In: Steel research international. 83, p. 1-8

    Research output: Contribution to journal › Article › Research › peer-review

  213. Published

    Mineralogical and structural evolution of iron ore fines reduced in a lab scale fluidized bed reactor

    Skorianz, M., Mali, H., Schenk, J., Plaul, J. F., Pichler, A. & Hanel, M., 2012, Proceedings of 6th International Congress on the Science and Technology of Ironmaking - ICSTI. p. 2347-2359

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  214. Published

    Quantifying of a Dynamic Refractory Wear Test Setup for MgO-C Products

    Goriupp, J., Rief, A. & Schenk, J., 2012, In: Berg- und hüttenmännische Monatshefte : BHM. 157, p. 340-344

    Research output: Contribution to journal › Article › Research › peer-review

  215. Published

    The importance of sulfur in the iron and steel industry

    Goriupp, J. & Schenk, J., 2012, The XII. International Symposium for Desulfurization of Hot Metal and Steel. p. 33-40

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  216. Published

    Thermodynamic and Kinetic Simulation of the Manganese Ore Addition in the Steelmaking Converter

    Lytvynyuk, Y., Schenk, J., Hiebler, M. & Mizelli, H., 2012, Asia Steel 2012. p. 49-49

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  217. 2011
  218. Published

    Verfahren zur Entfernung von CO2 aus Abgasen von Anlagen zur Roheisenherstellung

    Schenk, J. & Millner, R., 15 Apr 2011, Patent No. A.1440/2009

    Research output: Patent

  219. Published

    PROCESS AND DEVICE FOR PRODUCING PIG IRON OR LIQUID STEEL PRECURSORS.

    Johannes, L. S., Jan-Friedemann, P. & Christian, B., 5 Apr 2011, IPC No. C21B 13/ 00 A I, Patent No. MX2010013382, Priority date 27 Apr 2009, Priority No. WO2009EP55047

    Research output: Patent

  220. Published

    Düse zum Eindüsen von sauerstoffhaltigem Gas in ein Roheisenaggregat mit Kantenschutz durch auswechselbares Einsatzstück

    Schenk, J., Aichinger, G., Berner, F., Lechner, S., Lekic-Ninic, M., Plaul, J-F., Schmidt, M., Söntgen, T., Vuletic, B., Wieder, K. & Wurm, J., 15 Mar 2011, Patent No. A 1862/2008

    Research output: Patent

  221. Published

    Balance model of the Finex process to estimate the overall energy consumption of the process

    Thaler, C., Schenk, J. & Plaul, J. F., 15 Feb 2011, In: Stahl und Eisen. 131, 2, p. 31-37

    Research output: Contribution to journal › Article › Research › peer-review

  222. Published

    Structural and morphological changes during reduction of hematite to magnetite and wustite in hydrogen rich reduction gases under fluidised bed conditions

    Weiss, B., Sturn, J., Voglsam, S., Strobl, S., Mali, H., Winter, F. & Schenk, J., Jan 2011, In: Ironmaking and steelmaking. 38.2011, 1, p. 65-73 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  223. Published

    Bilanzmodell des FINEX-Prozesses ermöglicht die Abschätzung des Gesamtenergieverbrauchs

    Thaler, C., Schenk, J. & Plaul, J. F., 2011, In: Stahl und Eisen. 131, p. 31-37

    Research output: Contribution to journal › Article › Research › peer-review

  224. Published

    Entwicklung eines Modells zur Bilanzierung der Massen- und Energieströme für den FINEX®-Prozess zur Optimierung des Energieeinsatzes und Minimierung der Treibhausgasemissionen

    Thaler, C. M., 2011, 79 p.

    Research output: Thesis › Master's Thesis

  225. Published

    Exportgasverwertung zur CO2-Minimierung

    Tappeiner, T. & Kepplinger, W., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  226. Published

    Exportgasverwertung zur CO2-Minimierung

    Tappeiner, T. & Kepplinger, W., 2011, Minisymposium der Verfahrenstechnik. p. 192- 196

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  227. Published

    Ganzheitliche Betrachtung des Einsatzes von LRI (Low Reduced Iron) im Hochofen zur CO2-Minimierung

    Tappeiner, T., 2011, 126 p.

    Research output: Thesis › Doctoral Thesis

  228. Published

    Industrial fluidised bed direct reduction kinetics of hematite ore fines in H2 rich gases at elevated pressure

    Weiss, B., Sturn, J., Voglsam, S., Winter, F. & Schenk, J., 2011, In: Chemical engineering science : Génie chimique. 66.2011, 4, p. 703-708 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  229. Published

    Recent status of fluidized bed technologies for producing iron input materials for steelmaking

    Schenk, J., 2011, In: Particuology. 9, 1, p. 14-23

    Research output: Contribution to journal › Article › Research › peer-review

  230. Published

    Reduction Technologies for the Recycling of Iron and Steel Residues

    Schenk, J., 2011, 3. Seminar Networking between Zinc and Steel. p. 63-76

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  231. Published

    Solid Recovered Fuels in the Steel Industry

    Kepplinger, W. & Tappeiner, T., 2011, In: Waste management & research. p. -

    Research output: Contribution to journal › Article › Research › peer-review

  232. Published

    Thermodynamic and Kinetic Modelling of the Devan adization Process in the Steelmaking Converter

    Lytvynyuk, Y., Schenk, J., Hiebler, M. & Mizelli, H., 2011, 6th European Oxygen Steelmaking Conference 2011 (EOSC 2011). p. 657-664

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  233. Published

    Usage of FINEX® LRI (low reduced iron) in the blast furnace

    Thaler, C., Tappeiner, T., Schenk, J., Kepplinger, W., Plaul, J. F. & Schuster, S., 2011, 2nd International Conference and Exhibition on Clean Technologies in the Steel Industry. p. 1-12

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  234. 2010
  235. Published

    Verfahren und Vorrichtung zum Abtrennen von partikelförmigen Feststoffen von einem Gasstrom

    Schenk, J., Eder, T., Millner, R. & Rein, N., 15 Nov 2010, Patent No. A 1659/2008

    Research output: Patent

  236. Published

    Verfahren zur Herstellung von Agglomeraten

    Schenk, J., Böhm, C., Heckmann, H. & Stiasny, H. H., 15 Sept 2010, Patent No. A 1419/2008

    Research output: Patent

  237. Published

    Instalacion y procedimiento para la depuracion de gas de proceso para una instalacion de fusion por reduccion, que comprende una instalacion conjunta para la separacion por goteo en la que desembocan tanto el primer sistema de lavado que conduce el gas de alto horno como tambien el segundo sistema de lavado que conduce el gas generador.

    Martin, S., Kurt, W., Johann, W., Sin-Myoung, K. & Johannes, L. S., 4 Jun 2010, IPC No. C21B 13/ 14 A I, Patent No. CL2009001489, Priority date 27 Jun 2008, Priority No. AT20080001026

    Research output: Patent

  238. Published

    Metodo y planta para obtener arrabio o productos de acero liquido que comprende fundir una primera porcion de insumos ferrosos parcilamente reducidos en un reactor de fusion, con aporte de portadores de carbono y gas que contiene oxigeno, y alimentar una segunda porcion de insumos ferrosos parcialmente reducidos a un reactor a un reactor de reduccion de fusion.

    Christian, B., Jan-Friedemann, P. & Johannes, L. S., 4 Jun 2010, IPC No. F27B 1/ 00 A I, Patent No. CL2009001362, Priority date 6 Jun 2008, Priority No. AT20080000920

    Research output: Patent

  239. Published

    Procedimiento para el analisis microscopico de sustancias añadidas para un proceso de transformacion, para producir productos metalurgicos empleando gases de proceso, en una o varias etapas, con ondas electro-magneticas polarizadas o no polarizadas, o microscopia electronica, empleando en el analisis multietapas luz polarizada en direcciones diferentes.

    Johannes, S., Kurt, W., Harald, F., Heinrich, M., Stefan, S., Bernhard, S. & Franz, W., 4 Jun 2010, IPC No. G05D 21/ 00 A I, Patent No. CL2009001374, Priority date 6 Jun 2008, Priority No. AT20080000921

    Research output: Patent

  240. Published

    Nozzle for injecting gas containing oxygen into a pig iron device having an injector insertion pipe

    Johann, W., Stefan, L., Marinko, L-N., Georg, A., Franz, B., Jan-Friedemann, P., Johannes, L. S., Martin, S., Thomas, S., Bogdan, V. & Kurt, W., 3 Jun 2010, IPC No. F27D 3/ 16 A I, Patent No. AU2009319139, Priority date 5 Nov 2009, Priority No. WO2009EP64685

    Research output: Patent

  241. Published

    Verfahren zur Steuerung eines Transformationsverfahrens

    Schenk, J., Fischer, H., Mali, H., Schuster, S., Spuida, B. H., Wieder, K. & Winter, F., 15 May 2010, Patent No. A 921/2008

    Research output: Patent

  242. Published

    Method and device for operating a smelting reduction process

    Robert, M., Schenk, J. L. & Kurt, W., 29 Apr 2010, IPC No. F02C 6/ 00 A I, Patent No. AU2009306565, Priority date 29 Sept 2009, Priority No. WO2009EP62607

    Research output: Patent

  243. Published

    Method and device for separating particulate solids from a gas flow

    Eder, T., Robert, M., Rein, N. & Johannes, L. S., 29 Apr 2010, IPC No. B01D 50/ 00 A I, Patent No. AU2009306564, Priority date 29 Sept 2009, Priority No. WO2009EP62605

    Research output: Patent

  244. Published

    Process for producing agglomerates of finely particulate iron carriers

    Heckmann, H., Christian, B., Johannes, L. S. & Stiasny, H. H., 18 Mar 2010, IPC No. C22B 5/ 14 A I, Patent No. AU2009291046, Priority date 17 Aug 2009, Priority No. WO2009EP60609

    Research output: Patent

  245. Published

    Prozessgas-Reinigungseinrichtung für eine Schmelzreduktionsanlage zur Gewinnung von Roheisen

    Schenk, J., Kang, S. M., Schmidt, M. & Wurm, J., 15 Mar 2010, Patent No. A 1026/2008

    Research output: Patent

  246. Published

    Verfahren und Vorrichtung zur Herstellung von Roheisen und flüssigen Stahlvorprodukten

    Schenk, J., Böhm, C. & Jan-Friedemann, P., 15 Mar 2010, Patent No. A 920/2008

    Research output: Patent

  247. Published

    Experimental and morphological investigations of the reduction from coarse hematite to magnetite and wustite under fluidized bed conditions

    Weiss, B., Sturn, J., Voglsam, S., Strobl, S., Mali, H., Winter, F. & Schenk, J., 1 Feb 2010, In: Steel research international. 81, 2, p. 93-99 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  248. Published

    Method and device for producing molten material

    Hauzenberger, F., Rein, N., Wieder, K., Schenk, J., Vuletic, B., Schmidt, M., Wurm, J. & Millner, R., 27 Jan 2010, IPC No. C21B 13/ 14 A I, Patent No. CN101636510, Priority date 1 Oct 2007, Priority No. WO2007EP08515

    Research output: Patent

  249. Published

    Bilanzmodell des FINEX®-Prozesses zur Abschätzung von CO2-Emissionen

    Thaler, C., Schenk, J. & Plaul, J. F., 2010, DepoTech 2010. p. 649-653

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  250. Published

    Bilanzmodell des FINEX®-Prozesses zur Abschätzung von CO2-Emissionen

    Thaler, C., Plaul, J. F. & Schenk, J., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  251. Published

    Characterisation of raw materials for use in the FINEX process

    Karasangabo, A., Skorianz, M. & Thaler, C., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  252. Published

    Entwicklung eines Modells zur Abbildung der CO2-Minimierung bei der Roheisenproduktion durch den Einsatz von vorreduziertem Material

    Tappeiner, T. & Kepplinger, W., 2010, Minisymposium der Verfahrenstechnik. p. 28-33

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  253. Published

    Influence of Auxiliary Fuel Injection to Tuyeres on Flame Temperature and Flooding Limits in the FINEX® Process: A Theoretical Investigation

    Schenk, J., Ahn, S-G. & Thaler, C., 2010, In: Berg- und hüttenmännische Monatshefte : BHM. p. 518-522

    Research output: Contribution to journal › Article › Research › peer-review

  254. Published

    Kohlendioxidminimierung bei der Roheisenproduktion

    Tappeiner, T., Kepplinger, W. & Schuster, S., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  255. Published

    Kohlendioxidminimierung bei der Roheisenproduktion

    Tappeiner, T., Kepplinger, W. & Schuster, S., 2010, DepoTech 2010. p. 641-644

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  256. Published

    Linking of Computer Assisted Thermodynamics with Automated SEM/EDS Measurements for the Characterization of Non-Metallic Inclusions in Steel

    Wiener, J., Wieser, G. & Schenk, J., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  257. Published

    Modell zur Ermittlung des Reduktionsmittelbedarfs bei der Roheisenproduktion

    Tappeiner, T., Kepplinger, W. & Schuster, S., 2010, In: Stahl und Eisen. Nr. 5, p. 43-49

    Research output: Contribution to journal › Article › Research › peer-review

  258. Published

    Möglichkeiten der energetischen Verwertung von Weintrester

    Hollauf, B. & Kepplinger, W., 2010, DepoTech 2010 - Abfallwirtschaft, Abfalltechnik, Deponietechnik und Altlasten. p. 665-668

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  259. Published

    Research and Engineering Work for Enhancement of Competitiveness of FINEX® Technology - Phase 1

    Thaler, C., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  260. 2009
  261. Published

    Method of controlling a transformation process

    Stefan, S., Spuida, B. H., Wieder, K., Johannes, L. S., Mali, H. R., Kurt, W., Winter, F. & Fischer, H., 10 Dec 2009, IPC No. C21B 5/ 00 A I, Patent No. AU2009254074, Priority date 7 May 2009, Priority No. WO2009EP55545

    Research output: Patent

  262. Published

    Process and device for producing pig iron or liquid steel precursors

    Schenk, J. L., Jan-Friedemann, P. & Christian, B., 10 Dec 2009, IPC No. C21B 13/ 00 A I, Patent No. AU2009254062, Priority date 27 Apr 2009, Priority No. WO2009EP55047

    Research output: Patent

  263. Published

    Obituary for Prof. Wilfried Krieger

    Schenk, J., Dec 2009, In: Steel research international. 80, 12, p. 866-866

    Research output: Contribution to journal › Article › Research › peer-review

  264. Published

    СПОСОБ ОТДЕЛЕНИЯ ПРИМЕСЕЙ ИЗ ИСХОДНОГО СЫРЬЯ ПРИ ПЛАВЛЕНИИ МЕДИ

    Kepplinger, W. L., Hollauf, B. & Mayer, F. W., 10 Oct 2009, IPC No. C22B 7/ 02 A I, Patent No. RU2008110996, Priority date 1 Sept 2005, Priority No. AT20050001433

    Research output: Patent

  265. Published

    Method and device for producing liquid pig iron or liquid steel precursor products

    Georg, A., Wieder, K., Schenk, J. L., Hado, H., Martin, S., Wurm, J., Hado, H., Eder, T., Robert, M. & Johann, W., 24 Sept 2009, IPC No. F27D 17/ 00 A I, Patent No. AU2009226806, Priority date 30 Jan 2009, Priority No. WO2009EP51058

    Research output: Patent

  266. Published

    Method and device for producing molten material

    Hauzenberger, F., Millner, R., Rein, N., Schenk, J., Schmidt, M., Vuletic, B., Wieder, K. & Wurm, J., 9 Sept 2009, IPC No. C21B 13/ 00 A I, Patent No. CN101528948, Priority date 13 Oct 2006, Priority No. DE20061048601

    Research output: Patent

  267. Published

    METHOD FOR SEPARATING IMPURITIES OUT OF FEED STOCK IN COPPER MELTS

    Kepplinger, W. L., Hollauf, B. & Mayer, W. F., 3 Sept 2009, IPC No. C22B 11/ 00 A I, Patent No. US2009217785, Priority date 17 Aug 2006, Priority No. WO2006AT00343

    Research output: Patent

  268. Published

    VERFAHREN UND VORRICHTUNG ZUR HERSTELLUNG VON GESCHMOLZENEM MATERIAL

    Schenk, J., Hauzenberger, F., Millner, R., Rein, N., Schmidt, M., Vuletic, B., Wieder, K. & Wurm, J., 29 Jul 2009, Patent No. 07818595.6

    Research output: Patent

  269. Published

    METHOD AND DEVICE FOR PRODUCING MOLTEN MATERIAL.

    Bogdan, V., Kurt, W., Johann, W., Franz, H., Robert, M., Norbert, R., Martin, S. & Johannes, L. S., 22 Apr 2009, IPC No. C21B 13/ 00 A I, Patent No. MX2009003732, Priority date 1 Oct 2007, Priority No. WO2007EP08515

    Research output: Patent

  270. Published

    METHOD AND DEVICE FOR PRODUCING MOLTEN MATERIAL.

    Bogdan, V., Kurt, W., Johann, W., Franz, H., Robert, M., Norbert, R., Martin, S. & Johannes, L. S., 22 Apr 2009, IPC No. C21B 13/ 14 A I, Patent No. MX2009003725, Priority date 1 Oct 2007, Priority No. WO2007EP08514

    Research output: Patent

  271. Published

    Empirical reduction diagrams for reduction of iron ores with H2 and CO gas mixtures considering non-stoichiometries of oxide phases

    Weiss, B., Sturn, J., Winter, F. & Schenk, J. L., Apr 2009, In: Ironmaking and steelmaking. 36.2009, 3, p. 212-216 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  272. Published

    Evaluation of the Limiting Regime in Iron Ore Fines Reduction with H2-Rich Gases in Fluidized Beds: Fe2O3 to Fe3O4

    Sturn, J., Voglsam, S., Weiss, B., Schenk, J. & Winter, F., 25 Feb 2009, In: Chemical Engineering & Technology. 32.2009, 3, p. 392-397 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  273. Published

    Fluidized-bed technology for the production of iron products for steelmaking

    Plaul, F. J., Böhm, C. & Schenk, J. L., 1 Feb 2009, In: Journal of the Southern African Institute of Mining and Metallurgy. 109, 2, p. 121-128 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  274. Published

    Method and device for producing metals and/or metals initial products

    Schmidt, M., Schenk, J., Hauzenberger, F., Stockinger, J. & Wurm, J., 28 Jan 2009, IPC No. F27D 3/ 00 A I, Patent No. ZA200705780, Priority date 23 Dec 2004, Priority No. AT20040002168

    Research output: Patent

  275. Published

    processo e aparelho para produzir metais e/ou produtos metÁlicos primÁrios

    Franz, H., Johannes, S., Martin, S., Josef, S. & Johann, W., 20 Jan 2009, IPC No. F27D 3/ 00 A I, Patent No. BRPI0519403, Priority date 6 Dec 2005, Priority No. WO2005EP13042

    Research output: Patent

  276. Published

    Actual state of smelting-reduction processes in ironmaking

    Kepplinger, W., 2009, In: Stahl und Eisen. 7/2009, p. 43-51

    Research output: Contribution to journal › Article › Research › peer-review

  277. Published

    Bestimmung der Fließeigenschaften von Schüttgütern

    Ellersdorfer, M. & Thaler, C., 2009, Tagungsband zum 5. Minisymposium Verfahrenstechnik an der TU Wien. p. 103-110

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  278. Published

    Bestimmung der Fließeigenschaften von Schüttgütern

    Ellersdorfer, M. & Thaler, C., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  279. Published

    FINEX - Ein Wunschtraum der Eisen- und Stahlindustrie wurde Wirklichkeit

    Schenk, J., 2009, In: Scale up. p. 8-9

    Research output: Contribution to journal › Article › Research › peer-review

  280. Published

    Optimierte Verwertung von Exportgasen aus der metallurgischen Industrie zur Verminderung von Kohlendioxidemissionen

    Tappeiner, T. & Kepplinger, W., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  281. Published

    Optimierte Verwertung von Exportgasen aus der metallurgischen Industrie zur Verminderung von Kohlendioxidemissionen

    Tappeiner, T. & Kepplinger, W., 2009, Minisymposium Verfahrenstechnik. p. 20-23

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  282. 2008

  283. Development and current status of the COREX® process with special focus on COREX Baosteel

    Siuka, D., Schenk, J. & Böhm, C., 1 Dec 2008, 3rd International Meeting on Ironmaking and 2nd International Symposium on Iron Ore. p. 678-686 9 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  284. Published

    Method for separating impurities out of feed stock in copper melts

    Hollauf, B., Mayer, F. W. & Kepplinger, W. L., 3 Sept 2008, IPC No. C22B 15/ 00 A I, Patent No. CN101258252, Priority date 1 Sept 2005, Priority No. AT20050001433

    Research output: Patent

  285. Published

    Verfahren und Vorrichtung zur thermischen Behandlung von Rohstoffen

    Kepplinger, W. & Hollauf, B., 11 Jun 2008, IPC No. C04B 7/ 44 A I, Patent No. EP1930303, Priority date 13 Nov 2006, Priority No. EP20060023555

    Research output: Patent

  286. Published

    Method for reducing a particulate material containing a metal, especially iron ore

    Konstantin, M., Johann, R., Siegfried, Z., Hanspeter, O., Johannes, S. & Leopold, W. K., 29 May 2008, IPC No. C21B 13/ 14 A I, Patent No. AU2002331402B, Priority date 28 Aug 2002, Priority No. WO2002AT00254

    Research output: Patent

  287. Published

    Verfahren und Vorrichtung zur thermischen Behandlung von Rohstoff

    Kepplinger, W. & Hollauf, B., 14 May 2008, IPC No. C04B 7/ 44 A I, Patent No. EP1921050, Priority date 13 Nov 2007, Priority No. EP20070022033

    Research output: Patent

  288. Published

    VERFAHREN ZUM ABTRENNEN VON VERUNREINIGUNGEN AUS EINSATZSTOFFEN IN KUPFERSCHMELZEN

    Hollauf, B., Mayer, Franz, W. & Kepplinger, W. L., 7 May 2008, IPC No. C22B 15/ 00 A I, Patent No. EP1917369, Priority date 17 Aug 2006, Priority No. WO2006AT00343

    Research output: Patent

  289. Published

    Method and device for producing molten material

    Robert, M., Bogdan, V., Johann, W., Norbert, R., Kurt, W., Franz, H., Johannes, S. & Martin, S., 24 Apr 2008, IPC No. C21B 13/ 14 A I, Patent No. AU2007312665, Priority date 1 Oct 2007, Priority No. WO2007EP08514

    Research output: Patent

  290. Published

    Method and device for producing molten material

    Wieder, K., Schenk, J., Bogdan, V., Martin, S., Wurm, J., Millner, R., Hauzenberger, F., Rein, N., Kurt, W., Schenk, J., Bogdan, V., Martin, S., Johann, W., Robert, M., Hauzenberger, F. & Rein, N., 24 Apr 2008, IPC No. C21B 13/ 00 A I, Patent No. AU2007312666, Priority date 1 Oct 2007, Priority No. WO2007EP08515

    Research output: Patent

  291. Published

    Biogasanlagen in Kopplung mit energieintensiven Industriezweigen

    Ellersdorfer, M. & Kepplinger, W., 2008, Energija - Racionalno Koristene Energije Energetska Efikasnost Odrzivi Ekoloski Razvoij. p. 45-49

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  292. Published

    CFD Simulation of the Carbon Dust Combustionin the COREX Melter Gasifier

    Berger, K., Weiß, C. & Kepplinger, W., 2008, In: Steel research international. Vol. 79, p. 579-585

    Research output: Contribution to journal › Article › Research › peer-review

  293. Published

    Competence Center for Excellent Technologies in Advanced Metallurgical and Environmental Process Development

    Lindorfer, B., Kepplinger, W., Schwab, P., Schifferl, H., Retschnig, A. & Kühas, T., 2008, In: Berg- und hüttenmännische Monatshefte : BHM. p. 20-25

    Research output: Contribution to journal › Article › Research › peer-review

  294. Published

    Fluidized-bed technology for the production of iron products for steelmaking

    Plaul, F., Böhm, C. & Schenk, J., 2008, Proceedings IFSA 2008. p. 334-346

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  295. Published

    Life-Cycle-Analyse für Kunststoff- und Papierschnüre im Bereich Landwirtschaft

    Tappeiner, T., 2008, 94 p.

    Research output: Thesis › Master's Thesis

  296. Published

    Limiting Steps in Multistage Iron Ore Fines Reduction with H2-rich Gases in Fluidized Beds at Elevated Pressure

    Sturn, J., Weiss, B., Winter, F. & Schenk, J., 2008, Proceedings of the 9th International Conference on Circulating Fluidized Beds. p. 47-53

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  297. Published

    Optimierung des Corex Prozesses

    Thaler, C. & Berger, K., 2008, 4. Minisymposium Verfahrenstechnik. p. 9-14

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  298. Published

    Wertmetallgewinnung aus Abfällen mit einem neuentwickelten Kupferbadreaktor

    Thaler, C. & Kepplinger, W., 2008, DepoTech 2008. p. 243-248

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  299. Published

    Wertstoffrückgewinnung im Kupferbadreaktor

    Thaler, C. M., 2008, 221 p.

    Research output: Thesis › Doctoral Thesis

  300. 2007
  301. Published

    VERWENDUNG EINES AMMONIAK ABGEBENDEN RESTSTOFFES

    Kepplinger, W. & Hollauf, B., 19 Dec 2007, IPC No. C04B 7/ 36 A I, Patent No. EP1866059, Priority date 10 Mar 2006, Priority No. WO2006IB00536

    Research output: Patent

  302. Published

    VERFAHREN ZUM ABTRENNEN VON VERUNREINIGUNGEN AUS EINSATZSTOFFEN

    Kepplinger, W. L., 15 Mar 2007, Patent No. AT502396, Priority date 1 Sept 2005, Priority No. AT20050001433

    Research output: Patent

  303. Published

    Method for separating impurities out of feed stock in copper melts

    Franz, W. M., Bernd, H. & Kepplinger, W. L., 8 Mar 2007, IPC No. C22B 15/ 00 A I, Patent No. AU2006287095, Priority date 17 Aug 2006, Priority No. WO2006AT00343

    Research output: Patent

  304. Published

    CFD simulation of the carbon dust combustion in the COREX melter gasifier.

    Weiß, C., Berger, K., Kepplinger, W. & Aichinger, G., 2007, Proceedings of the 2nd International Conference of Simulation and Modelling of Metallurgical Processes in Steelmaking. p. 26-32

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  305. Published

    Comparison of the Reduction Kinetics of Hematite with CO-rich and H2-rich gases at elevated pressure

    Sturn, J., Weiss, B., Schuster, S., Winter, F. & Schenk, J., 2007, Comparison of the Reduction Kinetics of Hematite with CO-rich and H2-rich gases at elevated pressure. p. 58-63

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  306. Published

    Incineration of Solid Food Waste: A Project About Spent Grain

    Zanker, G., Kepplinger, W. & Pecher, C., 2007, Utilization of By-Products and Treatment of Waste in the Food Industry. p. 273-281

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  307. Published

    Reduction Kinetics of Coarse Hematite in Pressurized Fluidized Beds

    Weiss, B., Schuster, S., Winter, F., Mali, H. & Schenk, J., 2007, Proceeding AISTech. p. 45-52

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  308. Published

    Reduction of iron ore fines with CO-rich gases under pressurized fluidized bed conditions

    Pawlik, C., Schuster, S., Eder, N., Winter, F., Mali, H., Fischer, H. & Schenk, J. L., 2007, In: ISIJ international. 47, 2, p. 217-225

    Research output: Contribution to journal › Article › Research › peer-review

  309. Published

    Wertstoffrückgewinnung im Kupferbadreaktor

    Thaler, C. & Kepplinger, W., 2007, Summer University Tuzla 2007. p. 69-71

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  310. Published

    Wertstoffrückgewinnung im Kupferbadreaktor

    Thaler, C., 2007, 3. Minisymposium der Verfahrenstechnik - Beiträge der teilnehmenden Institute. p. 14-16

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  311. 2006
  312. Published

    VERWENDUNG EINES AMMONIAK ABGEBENDEN RESTSTOFFES

    Kepplinger, W. & Hollauf, B., 14 Sept 2006, IPC No. C04B 7/ 36 A I, Patent No. WO2006095261, Priority date 11 Mar 2005, Priority No. AT20050000416

    Research output: Patent

  313. Published

    Verfahren und Vorrichtung zur Erzeugung von Metallen und/oder Metallvorprodukten

    Schenk, J., Schmidt, M., Hauzenberger, F., Stockinger, J. & Wurm, J., 15 Jun 2006, Patent No. A 2168/2004

    Research output: Patent

  314. Published

    VERWENDUNG EINES AMMONIAK ABGEBENDEN RESTSTOFFES

    Kepplinger, W. L., 15 Mar 2006, Patent No. AT500744, Priority date 11 Mar 2005, Priority No. AT20050000416

    Research output: Patent

  315. Published

    Application of Fluidized Bed Technology for Reduction of Fine Iron Ore in Ironmaking Processes

    Schenk, J., 2006, Conference of 19 th FBC. p. 25-31

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  316. Published

    DIe Direktreduktion von Feineisenerzen in Druckwirbelschichtreaktoren: Experimentelle Untersuchungen und morphologische Betrachtung zur Übertragung auf industrielle Prozesse

    Schuster, S., Winter, F., Mali, H., Kühas, T. & Schenk, J., 2006, In: Berg- und hüttenmännische Monatshefte : BHM. 151, p. 462-468

    Research output: Contribution to journal › Article › Research › peer-review

  317. Published

    Emissionsfreie Mineralöltankreinigung mit stofflichem und energetischem Recycling

    Kepplinger, W. & Read, M., 2006, In: Erdöl, Erdgas, Kohle. p. 1-4

    Research output: Contribution to journal › Article › Research › peer-review

  318. Published

    From Fine Ore to Hot Metal

    Schenk, J. & Lee, H. G., 2006, Conference Proceedings of IS 06. p. 35-43

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  319. Published

    Institut für Verfahrenstechnik des industriellen Umweltschutzes

    Kepplinger, W., Draxler, J., Friedacher, A., Hollauf, B. & Weiß, C., 2006, In: Berg- und hüttenmännische Monatshefte : BHM. p. 283-286

    Research output: Contribution to journal › Article › Research › peer-review

  320. Published

    Iron ore reduction in a continuously operated multistage lab-scale fluidized bed reactor—Mathematical modeling and experimental results

    Thurnhofer, A., Schuster, S., Löffler, G., Habermann, A., Winter, F., Hofbauer, H., Schenk, J. & Zirngast, J., 2006, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 37.2006, August, p. 655-673 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  321. Published

    Kompostversuche von Papier- und Kunststoffschnüren

    Tappeiner, T., Thaler, C., Mikkola, H. & Kastl, I., 2006, Kompostversuche von Papier- und Kunststoffschnüren. Verl. Glückauf, p. 645-648

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  322. Published

    Kompostversuche von Papier- und Kunststoffschnüren

    Kastl, I., Tappeiner, T., Thaler, C. & Mikkola, H., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  323. Published

    Kompostversuche von Papier- und Kunststoffschnüren

    Kastl, I., Mikkola, H. & Tappeiner, T., 2006, In: Institutszeitschrift des Institutes für Nachhaltige Abfallwirtschaft und Entsorgungstechnik, Montanuniversität Leoben. 1/2006, p. 7-7

    Research output: Contribution to journal › Article › Research › peer-review

  324. Published

    Lehrstuhl für Thermoprozesstechnik

    Kepplinger, W. & Mugrauer, F., 2006, In: Berg- und hüttenmännische Monatshefte : BHM. p. 282-283

    Research output: Contribution to journal › Article › Research › peer-review

  325. Published

    Nachhaltigkeitsengagement börsennotierter Unternehmen

    Thaler, C. M., 2006, 100 p.

    Research output: Thesis › Master's Thesis

  326. Published

    Reduction Kinetics of Coarse Hematite Iron Ore in Fluidized Bed Reactors at Elevated Pressure

    Schuster, S., Pawlik, C., Winter, F., Mali, H., Fischer, H. & Schenk, J., 2006, Conference of 19 th FBC. p. 75-79

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  327. Published

    Reduction of Iron Ores with CO-rich and H2-rich Gases: A Detailed Evaluation for Industrial Fluidized Bed Processes

    Schuster, S., Pawlik, C., Winter, F., Mali, H., Fischer, H. & Schenk, J., 2006, Proceedings of AISTech. p. 86-92

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  328. Published

    Reduktion von Stickoxiden mit einem Rückstand aus der Rauchgasentschwefelung

    Hollauf, B., Kepplinger, W. & Ernecker, M., 2006, Tagungsband. Verl. Glückauf, p. 399-404

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  329. Published

    Technology comparison for MIDREX; HYL-III, FIOR revamped and FINMET

    Friedacher, A. & Kepplinger, W., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  330. Published

    Universitärer Forschungscluster "Sustainable Technologies in Metal Production and Processing" (STMP)

    Antrekowitsch, H., Biedermann, H., Buchmayr, B., Ebner, F., Eichlseder, W., Harmuth, H., Kepplinger, W., Kessler, F., Krieger, W., Lorber, K. & Ludwig, A., 2006, In: Berg- und hüttenmännische Monatshefte : BHM. 151, p. 263-265

    Research output: Contribution to journal › Article › Research › peer-review

  331. Published

    Zero-Waste and Zero Energy in Breweries - The Utilisation of Spent Grains

    Kepplinger, W., 2006, Zero-Waste and Zero Energy in Breweries - The Utilisation of Spent Grains. p. 78-78

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  332. 2005
  333. Published

    Azetylenflaschenrecycling

    Kepplinger, W., 2005, ASMET Forum für Metallurgie und Werkstofftechnik. p. 24-24

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  334. Published

    Characterization of the Reduction of Iron Ore Fines with CO-rich Gases under Pressurized Fluidized Bed Conditions

    Pawlik, C., Eder, N., Thurnhofer, A., Winter, F., Mali, H., Fischer, H. & Schenk, J., 2005, Proceeding IFSA. p. 89-93

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  335. Published

    Eisen- und Stahlerzeugung der Zukunft ohne Abfall

    Kepplinger, W., 2005, Technologica Acta 1(2). p. 145-152

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  336. Published

    Emissionsfreies Recycling von Azetylengasflaschen

    Kepplinger, W., 2005, In: Berg- und hüttenmännische Monatshefte : BHM. 150, p. 258-262

    Research output: Contribution to journal › Article › Research › peer-review

  337. Published

    Iron Ore Reduction in a Laboratory-scale Fluidized Bed Reactor-Effect of Pre-reduction on Final Reduction Degree

    Thurnhofer, A., Schachinger, M., Winter, F., Mali, H. & Schenk, J., 2005, In: ISIJ international. 45, p. 151-158

    Research output: Contribution to journal › Article › Research › peer-review

  338. Published

    Modelling Iron Ore Reduction for Processes using Consecutive Fluidized Bed Reactors

    Schuster, S., Thurnhofer, A., Winter, F., Fischer, H. & Schenk, J., 2005, Proceeding IFSA. p. 65-72

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  339. Published

    Recycling Solutions in the Steel Industry

    Kepplinger, W., 2005, Proceedings of the International Conference on Clean Technologies in the Steel Industry. p. 76-83

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  340. Published

    Schmelzreduktion von hämatitischen Feinerzen im Wasserstoff-Argon-Plasma

    Plaul, J., 2005

    Research output: Thesis › Doctoral Thesis

  341. Published

    Theoretische Betrachtung der Behandlung von Staub aus einem Elektrostahlwerk mit einem pyrometallurgischen Prozess

    Grega, O. & Kepplinger, W., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  342. Published

    Vaskohászati Salakok Építöipari Hasznosítására Vonatkozó Elöírások Harmonizációja Az EU-Ban

    Kepplinger, W., 2005, Mechatronika, Anyagtudomány. p. 19-29

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  343. Published

    Verwendung eines Entschwefelungsrückstandes zur Entfernung von Stickoxiden

    Hollauf, B. & Kepplinger, W., 2005, 11. Österreichische Chemietage. GÖCH - Ges. Österr. Chemiker, p. 0-0

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  344. 2004
  345. Published

    Die Verwertung von Biertrebern im Brauereiverbund

    Kepplinger, W. & Zanker, G., 2004, DepoTech. Verl. Glückauf, p. 189-196

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  346. Published

    Meeting the New Challenge in Iron Making with COREX and FINEX Technology

    Wieder, K., Schenk, J., Böhm, C. & Aichinger, C., 2004, Conference. p. 51-57

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  347. Published

    Methods for Assessing the Properties of Fine Iron Ores for Reduction Processes

    Hauzenberger, F., Reidetschläger, J., Mali, H. & Schenk, J., 2004, In: Berg- und hüttenmännische Monatshefte : BHM. 149, p. 385-392

    Research output: Contribution to journal › Article › Research › peer-review

  348. Published

    Neues emissionsfreies Reinigungsverfahren mit Energierückgewinnung

    Kepplinger, W., 2004, Shell Workshop. p. 1-5

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  349. Published

    Praktische Verwertung von Biertrebern als "Zero-Waste" in Brauereien

    Kepplinger, W., 2004, 8. Hannoversche Industriewasser-Tagung. p. 141-150

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  350. Published

    Reduction Behaviour of Hematite to Magnetite under Fluidized Bed Conditions

    Feilmayr, C., Thurnhofer, A., Winter, F., Mali, H. & Schenk, J., 2004, In: ISIJ international. 44, p. 1125-1133

    Research output: Contribution to journal › Article › Research › peer-review

  351. Published

    Új Salakkezelési technológia a Talajvízédelmi Elóírásokra Tekintettel

    Kepplinger, W., 2004, V. Környezettudományi Tanácskozás. p. 66-72

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  352. 2003
  353. Published

    Emmisionsarme Tankreinigung

    Kepplinger, W., 2003, Flachbodentanks. TÜV Akademie, p. 1-5

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  354. Published

    Informationssystem-Stahlwerke

    Kepplinger, W. & Ilie, S., 2003

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  355. Published

    Längsrissmodellierung

    Kepplinger, W. & Ilie, S., 2003

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  356. Published

    Soft Reduction Walzwerktechnik

    Kepplinger, W. & Ilie, S., 2003

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  357. Published

    Sulfid Prognosemodell

    Kepplinger, W. & Ilie, S., 2003

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  358. Published

    Untersuchungen Randschalebildung

    Kepplinger, W. & Ilie, S., 2003

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  359. Published

    Utilisation of brewers grains within a brewery complex

    Kepplinger, W. & Zanker, G., 2003, In: Brauwelt international. p. 162-165

    Research output: Contribution to journal › Article › Research › peer-review

  360. Published

    Verbesserung der Treffsicherheit für CAQC Kantenrissfunktionen

    Kepplinger, W. & Ilie, S., 2003

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  361. 2002

  362. A new method for the determination of iron ore reducibility under fluidized bed conditions

    Habermann, A., Winter, F., Hofbauer, H., Zirngast, J., Schenk, J. L. & Hiebler, M., 1 Feb 2002, In: Iron and steel maker : I & SM. 28, 2, p. 49-54 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  363. Published

    Bierbrauen ohne Rückstände

    Kepplinger, W., 2002, In: Triple m. p. 1-1

    Research output: Contribution to journal › Article › Research › peer-review

  364. Published

    Verwertung von Biertrebern im Brauereiverbund

    Kepplinger, W. & Zanker, DI., 2002, In: Brauwelt. p. 1-6

    Research output: Contribution to journal › Article › Research › peer-review

  365. 2000

  366. Experimental study on the kinetics of fluidized bed iron ore reduction

    Habermann, A., Winter, F., Hofbauer, H., Zirngast, J. & Schenk, J. L., 1 Jan 2000, In: ISIJ international. 40, 10, p. 935-942 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  367. Published

    Technology for an increased portion of fine ore in the COREX process

    Schenk, J. L., Wallner, F., Kepplinger, W. L., Shin, M. K., Cho, M. Y. & Lee, I. O., 1 Jan 2000, In: Scandinavian Journal of Metallurgy. 29, 2, p. 81-91 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  368. 1999

  369. FINEX (R): a new process for production of hot metal from fine ore and coal

    Joo, S., Kim, H. G., Lee, I. O., Schenk, J., Gennari, U. & Hauzenberger, F., Aug 1999, In: Scandinavian Journal of Metallurgy. 28.1999, 4, p. 178-183 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  370. 1998

  371. Direct use of fine iron ore in the Corex® process

    Joo, S., Shin, M. K., Cho, M., Lee, S. D., Lee, J. H., Lee, I. O., Schenk, J. L., Kepplinger, W. L., Wallner, F., Gennari, U. R., Hauzenberger, F. & Nagl, M., 1 Dec 1998, In: Iron and steel maker : I & SM. 25, 7, p. 39-43 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  372. Published

    Process for the continuous conveying of a fine-grained and/or pulverized

    Johannes, S., Michael, N. & Walter, R. K., 21 Jun 1998, IPC No. F27D 3/ 18 A I, Patent No. TW334507B, Priority date 16 Oct 1996, Priority No. TW19960112626

    Research output: Patent

  373. 1996
  374. Published

    A PROCESS FOR THE DIRECT REDUCTION OF PARTICULATE IRON-OXIDE- CONTAINING MATERIAL.

    Siegfried, Z., Johannes, L. S., Karl, C. & Konstantin, M., 30 Nov 1996, IPC No. C22B 13/ 02 A I, Patent No. MY108789, Priority date 22 May 1992, Priority No. AT19920001066

    Research output: Patent

  375. 1992
  376. Published

    Smelting reduction and direct reduction

    Kepplinger, W., 1992, Metallurgie des Eisens I - Gmelin-Durrer. p. 88-160

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  377. 1990
  378. Published

    Impact of the COREX Process on the Environment: a Comparative Study

    Dippenaar, R. J., Hauk, R. & Kepplinger, W., 1990, COREX Symposium 1990. p. 77-90

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  379. Published

    The COREX Process - Development and Further Plans

    Kepplinger, W., Maschlanka, W. & Wallner, F., 1990, COREX Symposium 1990. p. 5-20

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

Advanced filters

All authors

Reset

to
Reset filters