Robert Danzer

1 - 224 out of 224Page size: 500

Research output

  1. 2024
  2. Published

    Biaxial bending strength testing of uniaxially curved thin plates using a modified ball on three balls test

    Supancic, P., Maurer, F. & Danzer, R., 1 Sept 2024, In: Journal of non-crystalline solids. 639, 123067.

    Research output: Contribution to journal › Article › Research › peer-review

  3. 2023
  4. Published

    A brief guide to conducting failure analysis on ceramic components

    Harrer, W., Morrell, R. & Danzer, R., 2023, In: Practical metallography = Praktische Metallographie. 60, p. 580-593

    Research output: Contribution to journal › Article › Research › peer-review

  5. 2022
  6. Published

    Development of Ceramic Electrodes for Spark Plugs: Materials Selection

    Harrer, W., Tilz, A., Engelmayer, M., Gruber, M., Danzer, R. & Fimml, W., 2022, In: Ceramic forum international (CFI). 99, 6, p. E1-E6

    Research output: Contribution to journal › Article › Research › peer-review

  7. 2020
  8. Published

    A novel approach to assess the mechanical reliability of thin, ceramic-based multilayer architectures

    Gruber, M., Kraleva, I. R., Supancic, P. H., Danzer, R. & Bermejo, R., Nov 2020, In: Journal of the European Ceramic Society. 40, 14, p. 4727-4736 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  9. E-pub ahead of print

    Strength of additive manufactured alumina

    Schlacher, J., Lube, T., Harrer, W., Mitteramskogler, G., Schwentenwein, M., Danzer, R. & Bermejo, R., 21 Apr 2020, (E-pub ahead of print) In: Journal of the European Ceramic Society. 40.2020, 14, p. 4737-4745 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Montanuniversität Leoben: Der Lehrstuhl für Struktur- und Funktionskeramik

    Danzer, R. & Bermejo, R., 2020, In: Ceramic forum international (CFI). 97, 5-6, p. D1-D3

    Research output: Contribution to journal › Letter

  11. 2019
  12. Published

    Strength of Lithography-Based Alumina

    Schlacher, J. C., Lube, T., Mitteramskogler, G., Schwentenwein, M. & Danzer, R., 9 Sept 2019.

    Research output: Contribution to conference › Poster › Research › peer-review

  13. Published

    Schadensanalyse an einer Kompaktierwalze aus Siliziumnitrid

    Harrer, W., Morrell, R. & Danzer, R., 1 Apr 2019, In: Praktische Metallographie/Practical Metallography. 56.2019, 4, p. 262-275 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Biaxiale Festigkeitsprüfung von Keramiken

    Supancic, P. H., Lube, T. & Danzer, R., 13 Feb 2019.

    Research output: Contribution to conference › Poster › Research › peer-review

  15. Published

    Festigkeit von additiv gefertigtem Aluminiumoxid

    Lube, T., Schlacher, J. C., Harrer, W. S., Danzer, R., Mitteramslkogler, G. & Schwentenwein, M., 13 Feb 2019.

    Research output: Contribution to conference › Poster › Research › peer-review

  16. Published

    Das Institut für Struktur- und Funktionskeramik

    Danzer, R., 2019, 3 p. Leoben

    Research output: Other contribution › Transfer

  17. Published

    Franz Jeglitsch: Leoben, Politik und Gefüge

    Danzer, R., 2019, 3 p. Leoben

    Research output: Other contribution › Transfer

  18. 2018
  19. Published

    Moderne Methoden zur mikroskopischen Charakterisierung von ZnO Varistor-Korngrenzen

    Raidl, N., Sartory, B., Supancic, P. & Danzer, R., 1 Apr 2018, In: Praktische Metallographie/Practical Metallography. 55, 4, p. 192-202 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Auswirkungen von Oberflächenschädigung auf die Festigkeit in spröden Einkristallen für mikroelektronische Anwendungen

    Gruber, M., Leitner, A., Bermejo, R., Supancic, P., Gindel, T., Kraleva, I. & Danzer, R., 2018, Praktische Metallographie Sonderband. Vol. 52. p. 241-246

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  21. Published

    Corrigendum to "Surface Crack in Tension or in Bending - A Reassessment of the Newman and Raju Formula in Respect to Fracture Toughness Measurements in Brittle Materials" [J. Eur. Ceram. Soc. 32 (8) (2012) 1491–1501]

    Strobl, S., Supancic, P., Lube, T. & Danzer, R., 2018, In: Journal of the European Ceramic Society. p. 355-358 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Failure of Varistor Ceramics

    Danzer, R. & Supancic, P. H., 2018.

    Research output: Contribution to conference › Paper

  23. Published

    Fracture toughness of silicon nitride balls via thermal shock

    Strobl, S., Adlmann, F. A., Supancic, P., Lube, T., Danzer, R. & Schöppl, O., 2018, In: Journal of the European Ceramic Society. p. 1278–1287

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Franz Jeglitsch: Leoben, Politik und Gefüge

    Danzer, R., 2018, Praktische Metallographie Sonderband. Vol. 52. p. 57-62

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  25. Published

    Mechanische Eigenschaften von gedruckten Keramiken

    Lube, T., Schlacher, J., Harrer, W., Danzer, R., Mitteramskogler, G. & Schwentenwein, M., 2018, Praktische Metallographie Sonderband. Vol. 52. p. 229-234

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  26. Published

    Schadensanalyse an einer Kompaktierwalze aus Siliziumnitrid

    Harrer, W., Danzer, R. & Morrell, R., 2018, Praktische Metallographie Sonderband. Vol. 52. p. 267-272

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. 2017
  28. Published

    Influence of machining and crack healing on the strength of a commercial SiC-ceramic

    Harrer, W. S., Danzer, R. & Prackwieser, R., 12 Jul 2017.

    Research output: Contribution to conference › Poster › Research › peer-review

  29. Published

    Strength of Al2O3-Ceramic Produced by the LCM Additive Manufacturing Technology

    Lube, T., Schlacher, J. C., Harrer, W. S., Mitteramskogler, G., Schwentenwein, M. & Danzer, R., 12 Jul 2017.

    Research output: Contribution to conference › Poster › Research › peer-review

  30. Published

    Chairside CAD/CAM materials. Part 2: flexural strength testing

    Belli, R., Wendler, M., Petschelt, A., Mevec, D., Lube, T., Harrer, W., Danzer, R. & Lohbauer, U., 2017, In: Dental Materials. 33, 1, p. 99-109 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Fractography of zirconia-specimens made using additive manufacturing (LCM) technology

    Harrer, W. S., Schwentenwein, M., Lube, T. & Danzer, R., 2017, In: Journal of the European Ceramic Society. 37, p. 4331-4338

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Influence of the scatter of strength and of measurement uncertainties on the determination of the subcritical crack growth exponent in ceramics and glasses

    Krautgasser, C., Bermejo, R., Supancic, P. & Danzer, R., 2017, In: Journal of the European Ceramic Society. 37, p. 1873-1878 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Moderne Methoden zur mikroskopischen Charakterisierung von ZnO Varistor-Korngrenzen

    Raidl, N., Sartory, B., Supancic, P. H. & Danzer, R., 2017, Praktische Metallographie Sonderband. Vol. 51. p. 85-90

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  34. Published

    Strength Optimisation of a Zirconia-Ceramic Made Using Additive Manufacturing (LCM)-Technology

    Harrer, W., Schwentenwein, M. & Danzer, R., 2017, In: Ceramic forum international (CFI). 94, 10, p. E49-E54

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Surface strength of balls made of five structural ceramic materials evaluated with the Notched Ball Test (NBT)

    Strobl, S., Lube, T., Supancic, P., Schöppl, O. & Danzer, R., 2017, In: Journal of the European Ceramic Society. 37, 15, p. 5065-5070 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  36. 2016
  37. Published

    Hierarchical Architectures to Enhance Structural and Functional Properties of Brittle Materials

    Bermejo, R., Daniel, R., Schuecker, C., Paris, O., Danzer, R. & Mitterer, C., 26 Dec 2016, In: Advanced engineering materials. 19, 4, 15 p., 1600683.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Mechanical properties of ceramics

    Danzer, R., 7 Dec 2016.

    Research output: Contribution to conference › Presentation › Research

  39. Published

    What is tensile strength and how can it be determined

    Danzer, R., 12 Oct 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  40. Published

    Fracture toughness testing of ceramics - state of the art and new methods

    Danzer, R., 4 Sept 2016.

    Research output: Contribution to conference › Presentation › Research

  41. Published

    On the fracture toughness testing of ceramics

    Danzer, R., 21 Aug 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  42. Published

    On the tensile strength of ceramic materials/On the strength of ceramics, ceramic specimens and ceramic components

    Danzer, R., 13 Jun 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  43. Published

    Messung der Bruchzähigkeit von Keramiken: state of the Art und neue Methoden

    Danzer, R., 11 Apr 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  44. Published

    Die Messung der Bruchzähigkeit von Keramiken - State of the Art und neue Methoden

    Danzer, R., 7 Mar 2016.

    Research output: Contribution to conference › Presentation › Research

  45. Published

    Zinc Oxide Varistors: Mechanical Failure and New Physical Effects

    Danzer, R., 24 Jan 2016.

    Research output: Contribution to conference › Presentation › Research

  46. Published

    Biaxial strength testing of dental CAD/CAM block materials

    Wendler, M., Belli, R., Petschelt, A., Mevec, D., Harrer, W., Lube, T., Danzer, R. & Lohbauer, U., 2016.

    Research output: Contribution to conference › Poster › Research › peer-review

  47. Published

    Die Messung der Bruchzähigkeit von Keramiken: State of the Art und neue Methoden

    Danzer, R. & Lube, T., 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  48. Published

    Effects of subcritical crack growth on the determination of fracture toughness in brittle materials

    Krautgasser, C., Chlup, Z., Supancic, P., Danzer, R. & Bermejo, R., 2016, In: Journal of the European Ceramic Society. 36, p. 1307-1312 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Evaluation of Mechanical Strength of Miniaturized Functional Substrates and Components in Different Environments

    Bermejo, R., Krautgasser, C., Deluca, M., Pletz, M., Supancic, P., Aldrian, F. & Danzer, R., 2016, In: Journal of Microelectronics and Electronic Packaging. 13, 1, p. 17-22 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Influence of the surface condition on the biaxial strength of a commercial silicon carbide

    Harrer, W., Danzer, R. & Rendtel, A., 2016, In: Journal of the European Ceramic Society. 36, p. 3895-3900 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Mechanical properties of carbon brushes for electric engines

    Harrer, W., Reynvaan, S., Krautgasser, C. & Danzer, R., 2016, In: Ceramic forum international (CFI). 93, 4-5, p. E55-E60

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Subcritical crack growth in multilayer Low Temperature Co-fired Ceramics designed with surface compressive stresses

    Krautgasser, C., Danzer, R., Deluca, M., Supancic, P., Aldrian, F. & Bermejo, R., 2016, In: Journal of the European Ceramic Society. 36, p. 4095-4105 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  53. 2015
  54. Published

    Thermography and complementary measurements as tools to detect micro-irregularities in electronic components

    Röhrig, S., Petschenig, I., Bermejo, R., Hofstätter, M., Aldrian, F., Danzer, R. & Supancic, P., Dec 2015, In: Journal of ceramic science and technology. 6, 4, p. 255-260 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  55. Published

    Mechanical testing and fracture analyses of miniaturized ZnO-based multilayer components

    Macurova, K., Gruber, M., Pletz, M., Supancic, P., Danzer, R., Aldrian, F. & Bermejo, R., 26 Oct 2015

    Research output: Other contribution › Research

  56. Published

    Festigkeits- und Zähigkeitsprüfung an keramischen Bauteilen: Prüfung von Kugellagerkugeln

    Danzer, R., 1 Aug 2015.

    Research output: Contribution to conference › Paper › peer-review

  57. Published

    Heat development at the microscale in ceramic components - thermography and complementary tools

    Röhrig, S., Petschenig, I., Bermejo, R., Hofstätter, M., Aldrian, F., Danzer, R. & Supancic, P., 1 Apr 2015

    Research output: Other contribution › Research

  58. Published

    Mechanical characterization of miniaturized functional substrates and components in different environments

    Bermejo, R., Krautgasser, C., Deluca, M., Pletz, M., Supancic, P., Aldrian, F. & Danzer, R., 1 Apr 2015

    Research output: Other contribution › Research

  59. Published

    Doktoratsstudium der montanistischen Wissenschaften

    Danzer, R., 2015, Wo aus Forschung Zukunft wird Festschrift zum Jubiläum "175 Jahre Montanuniversität Leoben". Leoben, M. (ed.). Leoben, Vol. 2, Lehre und Forschung. p. 62-65 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Transfer › peer-review

  60. Published

    Fracture toughness and strength distribution at room temperature of zirconia tapes used for electrolyte supported solid oxide fuel cells

    Fleischhauer, F., Mark, T., Bermejo, R., Danzer, R., Mai, A., Graule, T. & Kübler, J., 2015, In: Journal of power sources. 275, p. 217-226

    Research output: Contribution to journal › Article › Research › peer-review

  61. Published

    Heat Treatment-Induced Improvement of the Thermal Shock Resistance of Si3N4 Tools for Metallurgical Applications

    Harrer, W., Danzer, R. & Berroth, K., 2015, In: Practical metallography = Praktische Metallographie. 52, 4, p. 191-204 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  62. Published

    High temperature mechanical properties of zirconia tapes used for electrolyte supported solid oxide fuel cells

    Fleischhauer, F., Bermejo, R., Danzer, R., Mai, A., Graule, T. & Kübler, J., 2015, In: Journal of power sources. 273, p. 237-243

    Research output: Contribution to journal › Article › Research › peer-review

  63. Published

    Influence of temperature and humidity on the strength of Low Temperature Co-fired Ceramics

    Krautgasser, C., Danzer, R., Supancic, P. & Bermejo, R., 2015, In: Journal of the European Ceramic Society. 35, p. 1823–1830

    Research output: Contribution to journal › Article › Research › peer-review

  64. Published

    Institut für Struktur- und Funktionskeramik

    Danzer, R., 2015, Wo aus Forschung Zukunft wird Festschrift zum Jubiläum "175 Jahre Montanuniversität Leoben". Leoben, M. (ed.). Leoben, Vol. 1, Die Entwicklung der Montanuniversität seit 1990. p. 232-235 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Transfer › peer-review

  65. Published

    On the Development of Experimental Methods for the Determination of Fracture Toughness Parameters of Ceramics

    Danzer, R., Lube, T. & Rasche, S., 2015, Recent Trends in Fracture and Damage Mechanics. Hütter, G. & Zybell, L. (eds.). Heidelberg: Springer, p. 197-214 18 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  66. Published

    Piezotronically Modified Double Schottky Barriers in ZnO Varistors

    Raidl, N., Supancic, P., Danzer, R. & Hofstätter, M., 2015, In: Advanced materials. 27, p. 2031-2035 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  67. Published

    Strength of an Electrolyte Supported Solid Oxide Fuel Cell

    Fleischhauer, F., Bermejo, R., Danzer, R., Mai, A., Graule, T. & Kuebler, J., 2015, In: Journal of power sources. 297, p. 158-167 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  68. Published

    Thermography and Complemetary Measurements as Tool to Detect Micro-Irregularities in Electronic Components

    Röhrig, S., Petschenig, I., Bermejo, R., Hofstätter, M., Aldrian, F., Danzer, R. & Supancic, P., 2015, In: Journal of ceramic science and technology. p. 255-260

    Research output: Contribution to journal › Article › Research › peer-review

  69. 2014
  70. Published

    Evaluation of subcritical crack growth in low temperature co-fired ceramics

    Bermejo, R., Supancic, P., Krautgasser, C. & Danzer, R., 10 Jan 2014, Mechanical Properties and Performance of Engineering Ceramics and Composites VIII - A Collection of Papers Presented at the 37th International Conf. on Advanced Ceramics and Composites, ICACC 2013. 2 ed. Vol. 34. p. 161-172 12 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  71. Published

    A new strength test for ceramic cylinders-The Notched Roller Test

    Strobl, S., Supancic, P., Schöppl, O. & Danzer, R., 2014, In: Journal of the European Ceramic Society. p. 2575-2584

    Research output: Contribution to journal › Article › Research › peer-review

  72. Published

    Effect of residuel stresses on the strength of glass-ceramic multilayer composites different microstructures

    Bermejo Moratinos, R., Krautgasser, C., Deluca, M., Strobl, S., Kraleva, I., Petschenig, I., Aldrian, F., Supancic, P. & Danzer, R., 2014, Praktische Metallographie Sonderband. p. 169-174

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  73. Published

    Expertenstudie Zukunftspotentiale von Hochleistungskeramiken

    Danzer, R., 2014

    Research output: Book/Report › Commissioned report › Transfer

  74. Published

    Failure analysis of Electrolyte-Supported Solid Oxide Fuel Cells

    Fleischhauer, F., Tiefenauer, A., Mai, A., Danzer, R., Graule, T. & Kübler, J., 2014, In: Journal of power sources. p. 382-390

    Research output: Contribution to journal › Article › Research › peer-review

  75. Published

    Fractography of biaxial tested Si3N4-specimens

    Harrer, W., Morrell, R. & Danzer, R., 2014, In: Journal of the European Ceramic Society. 34, p. 3283-3289

    Research output: Contribution to journal › Article › Research › peer-review

  76. Published

    Mechanical Characterization of Ceramics: Designing with Brittle Materials

    Bermejo Moratinos, R. & Danzer, R., 2014, Comprehensive Hard Materials. p. 285-298

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  77. Published

    Mechanical Properties and Reliability of Advanced Ceramics

    Lube, T. & Danzer, R., 2014, Advanced Ceramics for Dentristry. p. 173-199

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  78. Published

    Mechanical properties of silicon nitride rolling elements in dependence of size and shape

    Strobl, S., Lube, T., Supancic, P., Stoiser, M., Schöppl, O. & Danzer, R., 2014, In: Journal of the European Ceramic Society. p. 4167-4176

    Research output: Contribution to journal › Article › Research › peer-review

  79. Published

    Micro four-point probe investigation of individual ZnO grain boundaries in avaristor ceramic

    Nevosad, A., Hofstätter, M., Supancic, P., Danzer, R. & Teichert, C., 2014, In: Journal of the European Ceramic Society. 34, p. 1963-1970

    Research output: Contribution to journal › Article › Research › peer-review

  80. Published

    On the relationship between ceramic strength and tehe requirements for mechanical design

    Danzer, R., 2014, In: Journal of the European Ceramic Society. p. 3435-3460

    Research output: Contribution to journal › Article › Research › peer-review

  81. Published

    Verbesserung der Thermoschockbeständigkeit von Si3N4-Werkzeugen für metallurgische Anwendungen durch eine Wärmebehandlung

    Danzer, R., Harrer, W. & Berroth, K., 2014, Praktische Metallographie Sonderband. p. 175-180

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  82. 2013
  83. Published

    Einfluss der Messunsicherheit auf die Ermittlung der Weibull-Verteilung

    Danzer, R., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  84. Published

    Handbook of Advanced Ceramics - Materials, Applications, Processing, and Properties: 2nd Edition; Review

    Danzer, R. (Co-editor), 2013, Amsterdam: Elsevier.

    Research output: Book/Report › Book › Research

  85. Published

    Mechanical Properties of Ceramics

    Danzer, R., Lube, T., Morrell, R. & Supancic, P., 2013, Handbook of Advanced Ceramics. Amsterdam: Elsevier, p. 609-632

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  86. Published

    Strategies to optimize the strength and fracture resistance of ceramic laminates

    Bermejo Moratinos, R., Chlup, Z., Sestakova, L., Sevecek, O. & Danzer, R., 2013, Mechanical properties and performance of engineering ceramics and composites. Vol. VII. p. 163-174 (Ceramic engineering and science proceedings ; vol. 33, no. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  87. Published

    Subcritical Crack Growth on Low Temperature Co-fired Ceramics under Biaxial Loading

    Bermejo Moratinos, R., Supancic, P., Krautgasser, C., Morrell, R. & Danzer, R., 2013, In: Engineering Fracture Mechanics. 100, p. 108-121

    Research output: Contribution to journal › Article › Research › peer-review

  88. Published

    Voltage polarity dependent current paths through polycrystalline ZnO varistors

    Hofstätter, M., Nevosad, A., Teichert, C., Supancic, P. & Danzer, R., 2013, In: Journal of the European Ceramic Society. 33, p. 3473-3476

    Research output: Contribution to journal › Article › Research › peer-review

  89. 2012
  90. Published

    An assessment of in vivo failures of alumnia ceramic total hip joint replacements

    Morrell, R., Danzer, R., Milosev, I. & Trebse, R., 2012, In: Journal of the European Ceramic Society. 32, p. 3073-3084

    Research output: Contribution to journal › Article › Research › peer-review

  91. Published

    Effect of Crack Healing on the Strength of a Si3N4-Material used for Applications in the Metallurgical Industry

    Harrer, W., Danzer, R. & Berroth, K., 2012, In: Ceramic forum international (CFI). 89, p. E29-E33

    Research output: Contribution to journal › Article › Research › peer-review

  92. Published

    Experimental approach to assess the effect of metallization on the strength of functional ceramic components

    Bermejo Moratinos, R., Supancic, P., Aldrian, F. & Danzer, R., 2012, In: Scripta materialia. 66, p. 546-549

    Research output: Contribution to journal › Article › Research › peer-review

  93. Published

    Influence of deposited metal structures on the failure mechanisms of silicon-based components

    Deluca, M., Bermejo Moratinos, R., Pletz, M., Wießner, M., Supancic, P. & Danzer, R., 2012, In: Journal of the European Ceramic Society. 32, p. 4371-4380

    Research output: Contribution to journal › Article › Research › peer-review

  94. Published

    Influence of measurement uncertainties on the determination of the Weibull modulus

    Bermejo Moratinos, R., Supancic, P. & Danzer, R., 2012, In: Journal of the European Ceramic Society. 32, p. 251-255

    Research output: Contribution to journal › Article › Research › peer-review

  95. Published

    Influence of surface defects on the biaxial strength of a silicon nitride ceramic - increase of strength by crack healing

    Harrer, W., Danzer, R. & Morrell, R., 2012, In: Journal of the European Ceramic Society. 32, p. 27-35

    Research output: Contribution to journal › Article › Research › peer-review

  96. Published

    Layered ceramics with internal compressive stresses to improve strength and toughness

    Bermejo Moratinos, R., Chlup, Z., Sestakova, L., Sevecek, O. & Danzer, R., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  97. Published

    Strategies to optimize the strength and fracture resistance of ceramic laminates

    Bermejo Moratinos, R., Chlup, Z., Sestakova, L., Seveck, O. & Danzer, R., 2012, International Conference on Advanced Ceramics and Composites. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  98. Published

    Surface Crack in Tension or in Bending - A Reassessment of the Newman and Raju Formula in Respect to Fracture Toughness Measurements in Brittle Materials

    Strobl, S., Supancic, P., Lube, T. & Danzer, R., 2012, In: Journal of the European Ceramic Society. 32, p. 1491-1501

    Research output: Contribution to journal › Article › Research › peer-review

  99. Published

    The Notched Ball Test - Charaterisation of Surface Defects and Their Influence on Strength

    Lube, T., Witschnig, S., Supancic, P., Danzer, R. & Schöppl, O., 2012, Fractography of Glasses and Ceramics VI. p. 225-234

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  100. Published

    Thermal Shock Behaviour of Si3N4-Specimens - Influence of Annealing and Edges

    Harrer, W., Danzer, R. & Berroth, K., 2012, Fractography of Glasses and Ceramics VI. p. 245-254

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  101. Published

    Toughness Measurement on Ball Specimens, Part I: Theoretical Analysis

    Strobl, S., Supancic, P., Lube, T. & Danzer, R., 2012, In: Journal of the European Ceramic Society. 32, p. 1163-1173

    Research output: Contribution to journal › Article › Research › peer-review

  102. 2011
  103. Published

    10. Tagung Gefüge und Bruch

    Panzenböck, M. (Co-editor), Danzer, R. (Co-editor) & Pohl, M. (Co-editor), 2011, Eigenverlag.

    Research output: Book/Report › Anthology › Research

  104. Published

    Bruch von Keramiken aufgrund von Kontaktschädigung am Beispiel von Hüftgelenksimplantaten

    Danzer, R., Harrer, W. & Lube, T., 2011, Tagungsskript 10. Tagung Gefüge und Bruch. p. 127-133

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  105. Published

    Charakterisierung von LTCC-Leiterplatten unter biaxialer Belastung: Effekt der Metallisierung auf die Festigkeit

    Bermejo Moratinos, R., Sestakova, L., Kraleva, I., Supancic, P. & Danzer, R., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  106. Published

    Einfluss von Oberflächendefekten auf die biaxiale Festigkeit von Hochleistungskeramiken-Festigkeitssteigerung durch Rissheilen

    Harrer, W. & Danzer, R., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  107. Published

    Evaluation of the Strength of Low Temperature Co-fired Ceramics under Biaxial Stress

    Bermejo Moratinos, R., Supancic, P., Kraleva, I., Krautgasser, C., Aldrian, F., Morrell, R. & Danzer, R., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  108. Published

    Failure analysis of silicon nitride rings for hot rolling of highly alloyed steel and superalloys

    Harrer, W., Morrell, R., Lengauer, M., Danzer, R., Berroth, K. & Zleppnig, W., 2011, In: Engineering Failure Analysis. p. 138-147

    Research output: Contribution to journal › Article › Research › peer-review

  109. Published

    Fracture Mechanisms of Structural and Functional Multilayer Ceramic Structures

    Bermejo Moratinos, R., Sestakova, L., Grünbichler, H., Lube, T., Supancic, P. & Danzer, R., 2011, Key engineering materials. Vol. 465. p. 41-46 (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  110. Published

    Influence of Surface Quality on the Biaxial Strength of silicon Nitride Specimens

    Harrer, W., Danzer, R. & Supancic, P., 2011, In: Practical metallography = Praktische Metallographie. 48, p. 515-526

    Research output: Contribution to journal › Article › Research › peer-review

  111. Published

    Keramik im Walzwerk

    Danzer, R., Harrer, W. & Lengauer, M., 2011, XXX. Verformungskundliches Kolloquium. p. 51-56

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  112. Published

    Local strength measurement technique for miniaturised silicon-based components

    Deluca, M., Pletz, M., Morianz, M., Stahr, J., Supancic, P., Danzer, R. & Bermejo, R., 2011, 2011 12th Int. Conf. on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2011. 5765812

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  113. Published

    Neue Methodik zur Prüfung der Bruchzähigkeit keramischer Kugeln

    Danzer, R. & Strobl, S., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  114. Published

    Neue Methodik zur Prüfung der Oberflächenfestigkeit keramischer Kugeln

    Danzer, R. & Strobl, S., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  115. Published

    Raman spectroscopic study of phase transitions in undoped morphotropic PbZr1−xTixO3

    Deluca, M., Fukumura, H., Tonari, N., Capiani, C., Hasuike, N., Kisoda, K., Galassi, C., Harima, H. & Danzer, R., 2011, In: Journal of Raman Spectroscopy. 42, p. 488-495

    Research output: Contribution to journal › Article › Research › peer-review

  116. Published

    Schadensanalyse und technische Zuverlässigkeit keramischer Bauteile

    Danzer, R., 2011, Neue Entwicklungen in der Werkstoffprüfung - Herausforderungen an die Kennwertermittlung. p. 77-84

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  117. Published

    Strategies for fracture toughness, strength and reliability optimisation of ceramic-ceramic laminates

    Sestakova, L., Bermejo Moratinos, R., Chlup, Z. & Danzer, R., 2011, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 102, p. 613-626

    Research output: Contribution to journal › Article › Research › peer-review

  118. Published

    Strength and fracture analysis of silicon-based components for embedding

    Deluca, M., Bermejo Moratinos, R., Pletz, M., Supancic, P. & Danzer, R., 2011, In: Journal of the European Ceramic Society. 31, p. 549-558

    Research output: Contribution to journal › Article › Research › peer-review

  119. Published

    Strength reliability of 3D low temperature co-fired multilayer ceramics under biaxial loading

    Bermejo Moratinos, R., Supancic, P., Kraleva, I., Morrell, R. & Danzer, R., 2011, In: Journal of the European Ceramic Society. 31, p. 745-753

    Research output: Contribution to journal › Article › Research › peer-review

  120. 2010
  121. Published

    Determination of mechanical properties of brittle materials by using the small punch test and the ball on three balls test

    Rasche, S., Bermejo, R., Kuna, M. & Danzer, R., 1 Dec 2010.

    Research output: Contribution to conference › Paper › peer-review

  122. Published

    Fracture behaviour of low temperature cofired ceramics under biaxial loading: Influence of metal-ceramic internal architecture

    Bermejo, R., Kraleva, I., Morrell, R., Aldrian, F., Supancic, P. & Danzer, R., 1 Dec 2010.

    Research output: Contribution to conference › Paper › peer-review

  123. Published

    Characterisation and modelling of the mechanical reliability of semiconductor components for Printed Circuit Boards

    Bermejo Moratinos, R., Deluca, M., pletz, M., Supancic, P. & Danzer, R., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  124. Published

    Crack Propagation in Layered Ceramics under Flexural Loading

    Bermejo Moratinos, R. & Danzer, R., 2010, Proceedings of the XI International Conference of the European Ceramic Society. p. 98-103

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  125. Published

    Failure resistance optimisation in layered ceramics designed with strong interfaces

    Bermejo Moratinos, R. & Danzer, R., 2010, In: Journal of ceramic science and technology. 1, 1, p. 15-20

    Research output: Contribution to journal › Article › Research › peer-review

  126. Published

    Fracture of Ceramics

    Danzer, R., Lube, T., Supancic, P. & Damani, R., 2010, Ceramics Science and Technology. p. 531-575

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  127. Published

    Fracture Statistics for Small Specimens

    Danzer, R. & Supancic, P., 2010, Ceramic Materials and Components for Energy and Environmental Applications. p. 3-11

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  128. Published

    High failure resistance layered ceramics using crack bifurcation and interface delamination as reinforcement mechanisms

    Bermejo Moratinos, R. & Danzer, R., 2010, In: Engineering Fracture Mechanics. 77, p. 2126-2135

    Research output: Contribution to journal › Article › Research › peer-review

  129. Published

    Hot rolling steels and super alloys with silicon nitride tools

    Danzer, R., 2010, Ceramics and composites in extreme environments & for chemical and electrochemical applications : selected papers from the 12th International Ceramics Congress, part of CIMTEC 2010-12th International Ceramics Congress and 5th Forum on New Materials, Montecatini Terme, Italy, June 6 - 11, 2010 ; part D including Symposium CE - Ceramics and Composites in Extreme Environments, Symposium CF - Ceramics for Chemical, Electrochemical and Environmental Applications . p. 92-99 (Advances in science and technology; vol. 65).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  130. Published

    Influence of metallisation on the mechanical behaviour of Low Temperature Co-fired Ceramics under biaxial loading

    Bermejo Moratinos, R., Lucie, S., Kraleva, I., Supancic, P. & Danzer, R., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  131. Published

    Influence of Surface Quality on the biaxial Strength of Silicon Nitride

    Harrer, W., Danzer, R. & Supancic, P., 2010, In: Practical metallography = Praktische Metallographie. 42, p. 141-146

    Research output: Contribution to journal › Article › Research › peer-review

  132. Published

    Keramische Verbundwerkstoffe

    Danzer, R. & Lube, T., 2010, In: MP materials testing : Materialprüfung . p. 20-26

    Research output: Contribution to journal › Article › Research › peer-review

  133. Published

    Mechanical characterisation of miniaturised direct inkjet printed 3YTZP specimens for microelectronic applications

    Özkol, E., Wätjen, A., Bermejo Moratinos, R., Deluca, M., Ebert, J., Danzer, R. & Telle, R., 2010, In: Journal of the European Ceramic Society. 30, p. 3145-3152

    Research output: Contribution to journal › Article › Research › peer-review

  134. Published

    Meso-Scale Mechanical Testing Methods for Diamond Composite Materials

    Morrell, R., Danzer, R., Supancic, P., Harrer, W., Puchegger, S. & Peterlik, H., 2010, In: International journal of refractory metals & hard materials. 28, p. 508-515

    Research output: Contribution to journal › Article › Research › peer-review

  135. Published

    Modelling of the ferroic material behaviour of piezoelectrics: Characterisation of temperature-sensitive functional properties

    Grünbichler, H., Kreith, J., Bermejo Moratinos, R., Supancic, P. & Danzer, R., 2010, In: Journal of the European Ceramic Society. 30, p. 249-254

    Research output: Contribution to journal › Article › Research › peer-review

  136. Published

    Optimal strength and fracture toughness of damage tolerant multilayer ceramics

    Bermejo, R., Sestakova, L., Lube, T. & Danzer, R., 2010, 18th European Conference on Fracture: Fracture of Materials and Structures from Micro to Macro Scale.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  137. Published

    Raman spectroscopy for the investigation of indentation-induced domain texturing in lead zirconate titanate piezoceramics

    Deluca, M., Bermejo Moratinos, R., Grünbichler, H., Presser, V., Danzer, R. & Nickel, K. G., 2010, In: Scripta materialia. 63, p. 343-346

    Research output: Contribution to journal › Article › Research › peer-review

  138. Published

    Si3N4/SiC Materials based on Preceramic Polymers and Ceramic Powders

    Degenhardt, U., Motz, G., Krenkel, W., Stegner, F., Berroth, K., Harrer, W. & Danzer, R., 2010, Advances in Sintering Science and Technology. p. 379-387

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  139. Published

    Silicon Nitride Materials for Hot-working of High Strength Metal Wires

    Danzer, R. & Lengauer, M., 2010, In: Engineering Failure Analysis. 17, p. 596-606

    Research output: Contribution to journal › Article › Research › peer-review

  140. Published

    Strength and fracture characteristics of metal-piezoceramic multilayers for actuator application

    Grünbichler, H., Deluca, M., Bermejo Moratinos, R., Auer, C. & Danzer, R., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  141. Published

    The Notched Ball Test - A New Strength Test for Ceramic Spheres

    Supancic, P., Danzer, R., Wang, Z., Witschnig, S. & Schöppl, O., 2010, Ceramic Materials and Components for Energy and Environmental Applications. p. 327-335

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  142. 2009
  143. Published

    PROCESS FOR PRODUCING AN IN PARTICULAR POROUS SHAPED CERAMIC BODY AND SHAPED BODY PRODUCED THEREBY

    Simon, R. (Inventor) & Danzer, R. (Inventor), 31 Dec 2009, IPC No. D03D 25/ 00 A I, Patent No. US2009325442, Priority date 13 Sept 2007, Priority No. WO2007AT00434

    Research output: Patent

  144. Published

    VERFAHREN ZUR HERSTELLUNG EINES INSBESONDERE PORÖSEN KERAMISCHEN FORMKÖRPERS UND DAMIT HERGESTELLTER FORMKÖRPER

    Simon, R. (Inventor) & Danzer, R. (Inventor), 27 May 2009, IPC No. C04B 38/ 00 A I, Patent No. EP2061733, Priority date 13 Sept 2007, Priority No. WO2007AT00434

    Research output: Patent

  145. Published

    A New test to Determine the Tensile Strength of Brittle Balls-The Notched Ball Test

    Danzer, R., Supancic, P., Witschnig, S., Polaczek, E. & Morrell, R., 2009, In: Journal of the European Ceramic Society. p. 2447-2459

    Research output: Contribution to journal › Article › Research › peer-review

  146. Published

    Application of the Ball in Three Balls Test in the Development of a High Strength Partially Stabilised Zirconia Ceramic

    Danzer, R., Harrer, W. & Wagner, R., 2009, In: Ceramic forum international (CFI). 86, p. E50-E53

    Research output: Contribution to journal › Article › Research › peer-review

  147. Published

    Der 4-Kugelversuch zur Ermittlung der biaxialen Biegefestigkeit spröder Werkstoffe

    Danzer, R., Supancic, P. & Harrer, W., 2009, Technische keramische Werkstoffe. p. 1-48

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  148. Published

    Development of a Roadmap for Advanced Ceramics

    Danzer, R., Rödel, J., Kounga, A. B. N., Weissenberger-Eibl, M., Koch, D., Bierwisch, A., Rossner, W., Hoffmann, M. J. & Schneider, G., 2009, In: Journal of the European Ceramic Society. p. 1549-1560

    Research output: Contribution to journal › Article › Research › peer-review

  149. Published

    Evaluation of toughness ansiotropy on doped PZT ceramics as a function of load and temperature

    Bermejo Moratinos, R., Grünbichler, H., Kreith, J. & Danzer, R., 2009, Proceedings of the Fourth International Workshop on Direct and Inverse Problems in Piezoelectricity.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  150. Published

    Failure Investigation of Forming Rolls made of Si3N4

    Morrell, R., Harrer, W., Danzer, R. & Berroth, K., 2009, Key engineering materials. Vol. 413. p. 304-307 (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  151. Published

    Festigkeit und Einsatzgrenzen keramischer Drahtwalzen

    Danzer, R., Harrer, W. & Lengauer, M., 2009, Tagungsband zum Fachsyposium "Keramik für die Walztechnik". p. 95-112

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  152. Published

    Fractography of Advanced Ceramics III: Theoretical, Experimental, Review, Basic - Fundamental (Grundlagenforschung)

    Dusza, J., Danzer, R. (Co-editor), Morrell, R. & Quinn, G. D., 2009, Uetikon-Zuerich: Trans Tech Publications. (Key Engineering Materials; vol. 409)

    Research output: Book/Report › Book › Research

  153. Published

    Fracture response of low temperature cofired ceramics

    Bermejo Moratinos, R., kraleva, I., Morrell, R., Aldrian, F., Supancic, P. & Danzer, R., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  154. Published

    Fracture response of piezoceramic materials for injection systems

    Grünbichler, H., Bermejo Moratinos, R., Auer, C. & Danzer, R., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  155. Published

    Fracture statistics of small specimens

    Supancic, P. & Danzer, R., 2009

    Research output: Book/Report › Commissioned report › Research

  156. Published

    Influence of an Apparent R-curve on Strength and Fracture Statistics of Ceramic Laminates

    Danzer, R., Pascual-Hererro, J. & Lube, T., 2009, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. p. 1137-1144

    Research output: Contribution to journal › Article › Research › peer-review

  157. Published

    Influence of the Sample Size on the Results of B3B-Tests

    Harrer, W., Danzer, R., Supancic, P. & Lube, T., 2009, Key engineering materials. Vol. 409. p. 176-184 (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  158. Published

    Keramische Verbundwerkstoffe

    Danzer, R. & Lube, T., 2009, Proceedings zu "9. Tagung Gefüge und Bruch". p. 211-220

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  159. Published

    Modelling of ferroic material behaviour of piezoelectrics: Characterisation of temperature-sensitive functional properties

    Grünbichler, H., Kreith, J., Bermejo Moratinos, R., Supancic, P. & Danzer, R., 2009, Proceedings of Electroceramics XI: Piezoelectrics, 31.8 - 4.9.2008, Man UK. Freer, R. & Leach, C. (eds.). p. 1-7

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  160. Published

    Proceedings zu "9. Tagung Gefüge und Bruch"

    Danzer, R. (Co-editor), 2009, Leoben: Eigenverlag.

    Research output: Book/Report › Anthology › Research

  161. Published

    Schadensanalyse an Profilwalzen aus Siliziumnitrid

    Harrer, W., Morrell, R., Danzer, R. & Berroth, K., 2009, 9. Tagung Gefüge und Bruch. p. P18-P18

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  162. Published

    Schadensanalyse an Profilwalzen aus Siliziumnitrid

    Harrer, W., Morrell, R., Danzer, R. & Berroth, K., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  163. Published

    Strength Tests on Silicon Nitride Balls

    Supancic, P., Danzer, R., Harrer, W., Wang, Z., Witschnig, S. & Schöppl, O., 2009, Key engineering materials. Vol. 413. p. 193-200 (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  164. Published

    The Notched Ball Test - A new strenght Test for Ceramic Spheres

    Supancic, P., Danzer, R., Wang, Z., Schöppl, O. & Witschnig, S., 2009

    Research output: Book/Report › Commissioned report › Research

  165. 2008
  166. Published

    VERFAHREN ZUR HERSTELLUNG EINES INSBESONDERE PORÖSEN KERAMISCHEN FORMKÖRPERS UND DAMIT HERGESTELLTER FORMKÖRPER

    Simon, R. (Inventor) & Danzer, R. (Inventor), 20 Mar 2008, Patent No. WO2008031130, Priority date 14 Sept 2006, Priority No. AT20060001529

    Research output: Patent

  167. Published

    VERFAHREN ZUR HERSTELLUNG EINES INSBESONDERE PORÖSEN KERAMISCHEN FORMKÖRPERS UND DAMIT HERGESTELLTER FORMKÖRPER

    Simon, R. (Inventor) & Danzer, R. (Inventor), 15 Mar 2008, IPC No. C04B 35/ 63 A I, Patent No. AT504168, Priority date 14 Sept 2006, Priority No. AT20060001529

    Research output: Patent

  168. Published

    Ber-03-2008-Epcos

    Kraleva, I., Kreith, J., Supancic, P. & Danzer, R., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  169. Published

    Ber-10-2008-Bosch

    Supancic, P., Danzer, R., Harrer, W., Kreith, J. & Witschnig, S., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  170. Published

    Ber-23-2008-Epcos

    Supancic, P., Polaczek, E., Kreith, J., Danzer, R. & Sharova, E., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  171. Published

    Biaxial Strength Testing of a Silicon Nitride Ceramic for Bearing Rolling Elements

    Danzer, R., Harrer, W., Supancic, P., Schöppl, O. & Vieillard, C., 2008

    Research output: Book/Report › Commissioned report › Research

  172. Published

    Biaxial Strength Testing of a Silicon Nitride Ceramic for Bearing Rolling Elements

    Danzer, R., Harrer, W., Supancic, P., Schöppl, O. & Viellard, C., 2008

    Research output: Book/Report › Commissioned report › Research

  173. Published

    Comparative Study of the R-curve Behaviour of Al2O3-ZrO2 Laminates designed with External and Internal Compressive Layers

    Bermejo Moratinos, R., Pascual-Herrero, J., Lube, T. & Danzer, R., 2008, Proceedings of the X International Conference of the European Ceramic Society. p. 243-247

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  174. Published

    Einfluss von Kontaktspannungen auf die Bestimmung der Festigkeit im 4-Kugel-Versuch

    Harrer, W., Danzer, R., Supancic, P. & Lube, T., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  175. Published

    Evaluation of the toughness anisotropy in PZT based multilayer actuators

    Bermejo Moratinos, R., Kreith, J., Grünbichler, H. & Danzer, R., 2008, Global road map for ceramics. Second International Congress on ceramics. p. 1-5

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  176. Published

    Evaluation of the toughness anisotropy in PZT-based multilayered actuators

    Bermejo Moratinos, R., Grünbichler, H., Kreith, J. & Danzer, R., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  177. Published

    Evaluation of Toughness Anisotropy on Doped PZT Ceramics as a Function of Load and Temperature

    Bermejo Moratinos, R., Grünbichler, H., Kreith, J. & Danzer, R., 2008, 17th European Conference on Fracture: Multilevel Approach to Fracture of Materials, Components and Structures. p. 1701-1708

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  178. Published

    Failure investigation of forming rolls made of Si3N4

    Harrer, W., Morrell, R., Danzer, R. & Berroth, K., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  179. Published

    Fracture of Ceramics

    Danzer, R., Lube, T., Supancic, P. & Damani, R. J., 2008, In: Advanced engineering materials. 10, p. 275-298

    Research output: Contribution to journal › Article › Research › peer-review

  180. Published

    Fracture Statistics of Ceramic Laminates Strengthened by Compressive Residual Stresses

    Pascual-Herrero, J., Lube, T. & Danzer, R., 2008, In: Journal of the European Ceramic Society. 28, p. 1551-1556

    Research output: Contribution to journal › Article › Research › peer-review

  181. Published

    Influence of Contact Stress on the Determination of Strength in the Ball-on-Three-Balls Test

    Harrer, W., Danzer, R., Supancic, P. & Lube, T., 2008, In: Practical metallography = Praktische Metallographie. 45, p. 18-32

    Research output: Contribution to journal › Article › Research › peer-review

  182. Published

    Investigation of the behavior of multilayer piezoelectric actuators: Modeling and Experiments.

    Grünbichler, H., Kreith, J., Bermejo Moratinos, R., Supancic, P. & Danzer, R., 2008, Proceedings of SMASIS08. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  183. Published

    Investigations of 1D photonic crystals with surface roughness

    Meisels, R., Glushko, O., Kuchar, F. & Danzer, R., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  184. Published

    Modelling of ferroic material behaviour of piezoelectrics: Characterisation of temperature-sensitive functional properties

    Grünbichler, H., Kreith, J., Bermejo Moratinos, R., Supancic, P. & Danzer, R., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  185. Published

    Neuartige Si3N4 Werkstoffe auf Basis präkeramischer Polymere und keramischer Pulver

    Degenhardt, U., Motz, G., Stegner, F., Berroth, K., Harrer, W. & Danzer, R., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  186. Published

    Numerical and experimental investigations of surface roughness in 1D photonic crystals

    Glushko, O., Meisels, R., Kuchar, F. & Danzer, R., 2008, In: Journal of physics (Condensed matter). 20, p. 454220-1 -454220-7

    Research output: Contribution to journal › Article › Research › peer-review

  187. Published

    Optimal Strength and Toughness of Al2O3-ZrO2-Laminates Designed with External or Internal Compressive Layers

    Bermejo Moratinos, R., Pascual-Herrero, J., Lube, T. & Danzer, R., 2008, In: Journal of the European Ceramic Society. 28, p. 1575-1583

    Research output: Contribution to journal › Article › Research › peer-review

  188. Published

    Silicon Nitride Materials for Hot-working of High Strength Metal Wires

    Danzer, R. & Lengauer, M., 2008, 17th European Conference on Fracture: Multilevel Approach to Fracture of Materials, Components and Structures. p. 2016-2030

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  189. Published

    Silicon Nitride Tools for Hot Rolling of High Alloyed Steel and Superalloy Wires

    Lengauer, M. & Danzer, R., 2008, In: Journal of the European Ceramic Society. 28, p. 2289-2298

    Research output: Contribution to journal › Article › Research › peer-review

  190. Published

    Strength of Small Ceramic Specimens - A Limit to Weibull Statistics

    Danzer, R., Supancic, P. & Lube, T., 2008, Proceedings of the 10th International Conference of the European Ceramic Society. p. 1266-1270

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  191. Published

    The Ball on Three Balls Test: Strength Testing of Specimens of Different Sizes and Geometries

    Harrer, W., Danzer, R., Supancic, P. & Lube, T., 2008, Proceedings of the 10th International Conference of the European Ceramic Society. p. 1271-1275

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  192. 2007
  193. Published

    8. Tagung Gefüge und Bruch

    Danzer, R. (Co-editor), 2007, Eigenverlag.

    Research output: Book/Report › Anthology › Research

  194. Published

    B-MCL 2007-28

    Harrer, W., Bermejo Moratinos, R., Supancic, P., Kreith, J., Wang, Z. & Danzer, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  195. Published

    Ceramic rolling tools and components for enhanced lifetime and product quality

    Wiehler, K., Kailer, A., Mauk, P.-J., Eckhardt, C., Berroth, K., Kozlowski, J., Wagemann, A. & Danzer, R., 2007, 3rd International Steel Conference on New Developments in Metallurgical Process Technologies. p. 481-488

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  196. Published

    Der 4-Kugel-Versuch: Prüfung der Festigkeit scheiben- und plattenförmiger Bauteile

    Danzer, R., Harrer, W., Supancic, P. & Lube, T., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  197. Published

    Der 4-Kugel Versuch: Prüfung der Festigkeit scheiben- und plattenförmiger Proben

    Danzer, R., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  198. Published

    Druckversuch zur Charakterisierung von Piezokeramiken

    Grünbichler, H., Kreith, J., Maier, G., Bermejo Moratinos, R., Paul, S., Supancic, P. & Danzer, R., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  199. Published

    Fractography of Thermistors

    Danzer, R., Platzer, A., Supancic, P. & Wang, Z., 2007, Fractography of Glasses and Ceramics V. p. 231-242

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  200. Published

    Fracture Mechanics of Ceramics - A Short Introduction

    Danzer, R., 2007, Key engineering materials. Vol. 333. p. 77-86 (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  201. Published

    Fracture Statistics of Ceramics - Weibull Statistics and Deviations from Weibull Statistics

    Danzer, R., Supancic, P., Pascual Herrero, J. & Lube, T., 2007, In: Engineering Fracture Mechanics. 74, p. 2919-2932

    Research output: Contribution to journal › Article › Research › peer-review

  202. Published

    Influence of Contact Damage on Strength and Fractography of Ball on Three Balls Test Specimens

    Danzer, R., Harrer, W., Lube, T. & Supancic, P., 2007, Fractography of Glasses and Ceramics V. p. 203-214

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  203. Published

    Mechanisches Versagen von Keramiken verursacht durch elektrischen Strom

    Danzer, R. & Supancic, P., 2007, Mechanisches Versagen von Keramiken verursacht durch elektrischen Strom. p. 175-184

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  204. Published

    Optimierung des R-Kurvenverhaltens von Al2O3-ZrO2 Schichtkeramiken mit oberflächennahen und internen Druckeigenspannungen

    Bermejo Moratinos, R., Pascual-Herrero, J., Lube, T. & Danzer, R., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  205. Published

    Prediction of Fracture Toughness of a Ceramic Multilayer Composite - Modelling and Experiments

    Chen, C. R., Pascual-Herrero, J., Fischer, F. D., Kolednik, O. & Danzer, R., 2007, In: Acta materialia. 55, p. 409-421

    Research output: Contribution to journal › Article › Research › peer-review

  206. Published

    Schadensanalyse an elektrokeramischen Bauteilen

    Supancic, P., Platzer, A., Wang, Z., Harrer, W. & Danzer, R., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  207. Published

    Schadensanalyse an elektronischen Bauteilen

    Supancic, P., Platzer, A., Wang, Z., Harrer, W. & Danzer, R., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  208. Published

    Silicon Nitride Tools for Hot rolling of High Alloyed Steel and Superalloy Wires - Load analysis and First Practical Tests

    Danzer, R., Lengauer, M., Zleppnig, W. & Harrer, W., 2007, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 98, p. 1104-1114

    Research output: Contribution to journal › Article › Research › peer-review

  209. Published

    The Ball on three Balls Test - Strength and Failure Analysis of Different Materials

    Danzer, R., Harrer, W., Supancic, P., Lube, T., Wang, Z. & Boerger, A., 2007, In: Journal of the European Ceramic Society. 27, p. 1481-1485

    Research output: Contribution to journal › Article › Research › peer-review

  210. 2006
  211. Published

    Biaxial Strength Testing on Mini Specimens

    Danzer, R., Supancic, P., Harrer, W., Lube, T. & Börger, A., 2006, Fracture of Nano and Engineering Materials and Structures. Springer, p. 589-590

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  212. Published

    Biaxial Tensile Strength Test for Brittle Rectangular Plates

    Danzer, R., Supancic, P. & Harrer, W., 2006, In: Journal of the Ceramic Society of Japan. 114, p. 1054-1060

    Research output: Contribution to journal › Article › Research › peer-review

  213. Published

    B-MCL 2006-65

    Danzer, R., Supancic, P., Grünbichler, H., Bermejo Moratinos, R., Kreith, J. & Binder, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  214. Published

    Der 4-Kugel-Versuch: ein biaxialer Festigkeitstese für kleine keramische Scheiben

    Danzer, R., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  215. Published

    Einfluss von Kontaktspannungen auf die Bestimmung der Festigkeit im 4-Kugelversuch

    Danzer, R., Harrer, W., Supancic, P. & Lube, T., 2006, Fortschritte in der Metallographie. Werkstoff-Informationsges., p. 487-494

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  216. Published

    Oxide Fibre Composites with Promising Properties for High-Temperature Applications

    Simon, R. & Danzer, R., 2006, In: Advanced engineering materials. 8, p. 1145-1150

    Research output: Contribution to journal › Article › Research › peer-review

  217. Published

    Risswiderstand in keramischen Schichtverbunden

    Pascual-Herrero, J., Lube, T., Danzer, R. & Bermejo, R., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  218. Published

    Risswiderstand in keramischen Schichtverbunden

    Pascual-Herrero, J., Lube, T. & Danzer, R., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  219. Published

    Schadensanalysen an nichtlinearen elektrischen Bauteilen

    Platzer, A., Supancic, P., Wang, Z. & Danzer, R., 2006, Fortschritte in der Metallographie. Werkstoff-Informationsges., p. 323-330

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  220. Published

    Some Notes on the Correlation Between Fracture and defect statistics: Are weibull Statistics Valid for Very Small Specimens

    Danzer, R., 2006, In: Journal of the European Ceramic Society. 26, p. 3043-3049

    Research output: Contribution to journal › Article › Research › peer-review

  221. Published

    Temperaturentwicklung in keramischen PTC-Bauteilen

    Platzer, A., Supancic, P. & Danzer, R., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  222. Published

    Thermography and Simulation of Advanced Nonlinear Electroceramic Components

    Platzer, A., Supancic, P. & Danzer, R., 2006, In: Advanced engineering materials. 8, p. 1150-1155

    Research output: Contribution to journal › Article › Research › peer-review

  223. Published

    Weight Function, J-Integral and Material Forces Approach to Apparent Toughness of Ceramic Multilayers

    Pascual-Herrero, J., Chen, C. R., Kolednik, O., Fischer, F., Danzer, R. & Lube, T., 2006, Fracture of Nano and Engineering Materials and Structures: Proceedings of the 16th European Conference of Fracture, Alexandroupolis, Greece, July 3-7, 2006 . Dordrecht: Springer, p. 317-318

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  224. 2005
  225. Published

    Biaxial strength test of discs of different size using the ball on three balls test

    Börger, A., Danzer, R. & Supancic, P., 2005, 28th International Conference on Advanced Ceramics and Composites B. Lara-Curzio, E. & Readey, M. J. (eds.). p. 283 288 p. (Ceramic Engineering and Science Proceedings; vol. 25, no. 4).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  226. Published

    Bruch von Elektrokeramiken

    Danzer, R. & Supancic, P., 2005, In: Werkstoffler : Zeitung des Vereins Leobner Werkstoffwissenschafter. p. 15-19

    Research output: Contribution to journal › Article › Research › peer-review

  227. Published

    Failure Analysis of Si3N4 Rolls for Hot Wire Rolling - Numerical Anaysis of Thermal and Mechanical Stresses

    Danzer, R., Lengauer, M., Rubesa, D., Harrer, W. & Zleppnig, W., 2005, Key engineering materials. Vol. 290. p. 94-101 (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  228. Published

    Fractography of Advanced Ceramics II

    Dusza, J., Danzer, R. & Morell, R., 2005

    Research output: Book/Report › Book › Research

  229. Published

    Fracture of Electroceramic Components

    Supancic, P. & Danzer, R., 2005, Proceedings of 11th International Conference on Fracture. Eigenverlag, p. 5687-5692

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  230. Published

    Fracture Statistics of Ceramics - A Short Overview

    Danzer, R., Lube, T. & Supancic, P., 2005, Proceeding of 11th International Conference on Fracture. Eigenverlag, p. 3676-3681

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  231. Published

    Progress in Processing and Performance of Porous-Matrix Oxide/Oxide Composites

    Simon, R. & Danzer, R., 2005, In: International journal of applied ceramic technology. 2, p. 141-149

    Research output: Contribution to journal › Article › Research › peer-review

  232. Published

    Strength and Fractography of High Power Varistors

    Supancic, P., Wang, Z., Aldrian, F., Schriener, A. & Danzer, R., 2005, Key engineering materials. p. 358-365 (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  233. Published

    Strength and Fractography of Piezoceramic Multilayer Stacks

    Supancic, P., Wang, Z., Harrer, W. & Danzer, R., 2005, Key engineering materials. Vol. 290. p. 46-53 (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  234. Published

    Strength Distribution for materials presenting R-curve

    Pascual-Herrero, J. & Danzer, R., 2005

    Research output: Book/Report › Commissioned report › Research

  235. Published

    Thermography and Simulation as a Combined Method for Failure Analysis of PTCs

    Supancic, P., Platzer, A. & Danzer, R., 2005, Key engineering materials. Vol. 290. p. 54-61 (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  236. Published

    Weight funcion, J-Integral and material forces approach to apparent to ceramic multilayers

    Pascual-Herrero, J., Chen, C. R., Kolednik, O., Fischer, F. D. & Danzer, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  237. 2004
  238. Published

    Delayed failure behaviour of the ESIS silicon nitride reference material at 1200 °C in air

    Kovalcík, J., Dusza, J., Lube, T. & Danzer, R., 1 Feb 2004, In: Materials letters. 58, 6, p. 871-875 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  239. Published

    Low Thermal Conductivity Ceramics for Turbine Blade thermal Barrier Coating Application

    Börger, A., Danzer, R., Schulz, U., Saint-Raimond, B., Lavigne, O., Moretto, P. & Van Lieshout, A., 2004, Ceramic Engineering and Science Proceedings. p. 375-381

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  240. 2003
  241. Published

    Failure statistics beyond the Weibull behavior

    Danzer, R., Supancic, P. & Lube, T., 8 Dec 2003, In: Ceramic Engineering and Science Proceedings. 24, 4, p. 497-502 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  242. Published

    The ESIS silicon nitride reference material testing program

    Lube, T. & Danzer, R., 8 Dec 2003, In: Ceramic Engineering and Science Proceedings. 24, 4, p. 337-342 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  243. 2001
  244. Published

    Monte Carlo simulations of strength distributions of brittle materials - Type of distribution, specimen and sample size

    Danzer, R., Lube, T. & Supancic, P., 1 Jul 2001, In: Zeitschrift für Metallkunde : international journal of materials research and advanced techniques. 92, 7, p. 773-783 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  245. 1997
  246. Published

    The miniaturisation of the 4-point-bend test

    Lube, T., Manner, M. & Danzer, R., 1 Dec 1997, In: Fatigue & fracture of engineering materials & structures : Fatigue and fracture of engineering materials and structures. 20.1997, 11, p. 1605-1616 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  247. 1994
  248. Published

    Mechanical properties of some Si3N4 automotive gas turbine rotor ceramics

    Dusza, J., Lube, T., Danzer, R. & Weisskopf, K. L., 1 Jan 1994, Key Engineering Materials. Aedermannsdorf, Switzerland: Trans Tech Publications, Vol. 89-91. p. 535-540 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

View graph of relations

Latest Research Output

View more (224)