Chair of Mechanics (400)

Organisational unit: Chair

201 - 300 out of 809Page size: 100

Research output

  1. 2018
  2. Published

    The Influence of the Leveling Process on the Local Material Properties of Heavy Steel Plates

    Kaltenbrunner, T., 2018

    Research output: Thesis › Doctoral Thesis

  3. 2017
  4. Published

    Finite Element Based Optimization and Improvement of the Sucker Rod Pumping System

    Langbauer, C. & Antretter, T., 16 Nov 2017. 18 p.

    Research output: Contribution to conference › Paper › peer-review

  5. Published

    Mechanik und Thermodynamik der Werkstoffe

    Gamsjäger, E., Nov 2017.

    Research output: Contribution to conference › Poster › Research › peer-review

  6. Published

    Au55, a stable glassy cluster: results of ab initio calculations

    Vollath, D., Holec, D. & Fischer, F.-D., 25 Oct 2017, In: Beilstein journal of nanotechnology . 8.2017, p. 2221-2229 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  7. E-pub ahead of print

    Resolving alternating stress gradients and dislocation densities across AlxGa1-xN multilayer structures on Si(111)

    Reisinger, M., Tomberger, M., Zechner, J., Daumiller, I., Sartory, B., Ecker, W., Keckes, J. & Lechner, R. T., 16 Oct 2017, (E-pub ahead of print) In: Applied physics letters. 111.2017, 16, p. 162103 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    The effect of residual stresses and strain reversal on the fracture toughness of TiAl alloys

    Appel, F., Paul, J., Staron, P., Oehring, M., Kolednik, O., Predan, J. & Fischer, F.-D., 7 Oct 2017, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 709.2018, 2 January, p. 17-29 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    From microstructural characterization to mechanical properties of steels - An in-situ X-ray diffration study

    Gamsjäger, E. & Wießner, M., Jun 2017.

    Research output: Contribution to conference › Poster › Research › peer-review

  10. E-pub ahead of print

    Compressed Bi-crystal micropillars showing a sigmoidal deformation state – A computational study

    Toth, F., Kirchlechner, C., Fischer, F.-D., Dehm, G. & Rammerstorfer, F. G., 26 May 2017, (E-pub ahead of print) In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 700.2017, 17 July, p. 168-174 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  11. E-pub ahead of print

    Modelling of grain refinement driven by negative grain boundary energy

    Fischer, F.-D., Zickler, G. & Svoboda, J., 10 May 2017, (E-pub ahead of print) In: Philosophical magazine. 97.2017, 23, p. 1963-1977 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Prediction and Characterization of Residual Stresses after Heat Treatment of Massive Hot Work Tool Steel Components

    Schemmel, M., Antretter, T., Ecker, W. & Prevedel, P., 19 Apr 2017.

    Research output: Contribution to conference › Presentation › Research › peer-review

  13. E-pub ahead of print

    Structure and surface energy of Au55 nanoparticles: An ab initio study

    Holec, D., Fischer, F.-D. & Vollath, D., 6 Apr 2017, (E-pub ahead of print) In: Computational materials science. 134.2017, 15 June, p. 137-144 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Porenschließverhalten beim mehrdirektionalen und mehrstufigen Freiformschmieden

    Kaiser, R., Tewes, A., Wieser, V. & Antretter, T., 18 Mar 2017, XXXVI. Verformungskundliches Kolloquium: Zauchensee von 18.3 bis 22.3.2017. Leoben: Montanuniversität Leoben, Lehrstuhl für Umformtechnik, p. 134 - 139 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  15. Published

    Solutions for Critical Raw Materials under Extreme Conditions: A Review

    Grilli, M. L., Bellezze, T., Gamsjäger, E., Rinaldi, A., Novák, P., Balos, S., Piticescu, R. R. & Ruello, M. L., 17 Mar 2017, In: Materials. 10.2017, 3, 23 p., 285.

    Research output: Contribution to journal › Review article › peer-review

  16. E-pub ahead of print

    Cold pilgering of duplex steel tubes: The response of austenite and ferrite to excessive cold deformation up to high strains

    Ragger, K., Primig, S., Daniel, R., Kaiser, R., Paal, J., Mitterer, C. & Buchmayr, B., 16 Mar 2017, (E-pub ahead of print) In: Materials characterization. 128.2017, June, p. 257–268 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Modeling the interplay between transformation and plasticity in low-carbon steels - A micro-level constitutive model / RVE approach

    Petersmann, M., Antretter, T., Ehlenbröcker, U. & Cailletaud, G., 27 Feb 2017.

    Research output: Contribution to conference › Poster › Research

  18. E-pub ahead of print

    Intermetallic β-Solidifying γ-TiAl Based Alloys − From Fundamental Research to Application

    Mayer, S., Erdely, P., Fischer, F.-D., Holec, D., Kastenhuber, M., Klein, T. & Clemens, H., 23 Feb 2017, (E-pub ahead of print) In: Advanced engineering materials. 19.2017, 4, 27 p., 1600735.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    A new approach predicting the evolution of laminated nanostructures - Martensite in NiTi as an example

    Petersmann, M., Antretter, T., Waitz, T. & Fischer, F. D., 14 Feb 2017, In: Modelling and simulation in materials science and engineering. 25.2017, February, 17 p., 035004.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Calibration of phase field parameters demonstrated on kinetics of a shrinking single grain

    Fischer, F.-D., Zickler, G. & Svoboda, J., 8 Feb 2017, In: Philosophical magazine : Letters. 97.2017, 3, p. 92-100 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Incorporation of vacancy generation/annihilation into reactive diffusion concept – Prediction of possible Kirkendall porosity

    Svoboda, J. & Fischer, F.-D., 1 Feb 2017, In: Computational materials science. 127.2017, 1 February, p. 136-140 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    An Energy Approach to Determine the Martensite Morphology in Nanocrystalline NiTi

    Petersmann, M., Pranger, W., Waitz, T. & Antretter, T., 31 Jan 2017, In: Advanced engineering materials. 19.2017, 4, 6 p., 1600684.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Atomistic modelling-based design of novel materials

    Holec, D., Zhou, L., Riedl, H., Koller, C., Mayrhofer, P. H., Friák, M., Šob, M., Körmann, F., Neugebauer, J., Music, D., Hartmann, M. A. & Fischer, F.-D., 17 Jan 2017, In: Advanced engineering materials. 19.2017, 4, 19 p., 1600688.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Application of Photons and Neutrons for the Characterization and Development of Advanced Steels

    Eidenberger-Schober, E., Schnitzer, R., Zickler, G., Eidenberger-Schober, M., Bischof, M., Staron, P., Leitner, H., Schreyer, A. & Clemens, H., 2017, Neutrons and Synchrotron Radiation in Engineering Materials Science : From Fundamentals to Applications. 2 ed. Wiley-VCH , p. 377-394

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  25. Published

    Austenite Grain Growth in a Microalloyed X80 Line Pipe Steel

    Tichauer, W., 2017

    Research output: Thesis › Master's Thesis

  26. Published

    A variational approach to the modelling of grooving in a three-dimensional setting

    Hackl, K., Fischer, F.-D. & Svoboda, J., 2017, In: Acta materialia. 129.2017, 1 May, p. 331-342 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Beurteilung des Gefährdungspotentials von Porenbildung in Polymeren beim Einbetten elektronischer Komponenten in der Medizintechnik

    Prabitz, K., 2017

    Research output: Thesis › Master's Thesis

  28. Published

    Couples and Pairs Formation – Thermodynamic and Kinetic Modelling Applied to Al-Mg-Si

    Svoboda, J., Shan, Y. V., Kozeschnik, E. & Fischer, F.-D., 2017, In: Modelling and simulation in materials science and engineering. 25.2017, 15 p., 065011.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Crack Driving Force in Twisted Plywood Structures

    Fischer, F.-D., Kolednik, O., Predan, J., Razi, H. & Fratzl, P., 2017, In: Acta biomaterialia. 55.2017, June, p. 349-359 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Experimental and computational approach to evaluate the effect of leveling on the change of tensile properites of heavy steel plates

    Kaltenbrunner, T., Ecker, W., Antretter, T., Kaiser, R., Parteder, E. & Egger, R., 2017, AIP Conference Proceedings.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  31. Published

    Lecture within the Training School: The challenge of CRMs in extreme condition: advanced multidisciplinary view

    Gamsjäger, E., 2017.

    Research output: Contribution to conference › Presentation › Research › peer-review

  32. Published

    Numerical analysis of the rock cutting process based on a two-parameter description of tensile strength

    Pittino, G., Galler, R., Antretter, T., Mikl-Resch, M. J., Tichy, R., Ecker, W., Gimpel, M. & Kargl, H., 2017, Proceedings of 13th ISRM International Congress of Rock Mechanics 2015. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  33. Published

    Numerical simulation of stress-free shotcrete installation in the underground structures using finite element program ABAQUS

    Darmaev, E., Galler, R. & Antretter, T., 2017, Proceedings of the IV International Conference on Computational Methods in Tunneling and Subsurface Engineering: EURO:TUN 2017. Innsbruck, p. 339-346 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  34. Published

    Numerical study of the influence of irradiation parameters on the microwave-induced stresses in granite

    Toifl, M., Hartlieb, P., Meisels, R., Antretter, T. & Kuchar, F., 2017, In: Minerals engineering. 103-104.2017, April, p. 78-92 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    On Variants, Blocks and Packets and their Interaction with Crystal Plasticity

    Antretter, T., Petersmann, M., Cailletaud, G., Ehlenbröcker, U. & Vieweg, A., 2017.

    Research output: Contribution to conference › Presentation › Research › peer-review

  36. Published

    Optimization of a quick-release fastener for cutting discs in industrial mining applications

    Kernbichler, C., 2017

    Research output: Thesis › Master's Thesis

  37. Published

    Pre- and post-buckling behavior of bi-crystalline micropillars: Origin and consequences

    Kirchlechner, C., Toth, F., Rammerstorfer, F. G., Fischer, F.-D. & Dehm, G., 2017, In: Acta materialia. 124.2017, 1 February, p. 195-203 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Quantification of the material inhomogeneity effect in thin metallic film stacks

    Kozic, D., 2017

    Research output: Thesis › Doctoral Thesis

  39. Published

    Thermodynamic modelling of irreversible processes

    Svoboda, J., Fischer, F. D. & Kozeschnik, E., 2017, European Mineralogical Union and Mineralogical Society of Great Britain and Ireland. Vol. 16. p. 181-214 34 p. (EMU notes in mineralogy).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. Published

    Thermodynamic Treatment of Diffusive Phase Transformation (Reactive Diffusion)

    Fischer, F. D. & Svoboda, J., 2017, Handbook of Solid State Diffusion: Diffusion Fundamentals and Techniques. Paul, A. & Divinski, S. (eds.). Amsterdam, Vol. 1. p. 391-434

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  41. 2016
  42. E-pub ahead of print

    Extracting flow curves from nano-sized metal layers in thin film systems

    Kozic, D., Maier-Kiener, V., Konetschnik, R., Gänser, H.-P., Antretter, T., Brunner, R. & Kiener, D., 7 Dec 2016, (E-pub ahead of print) In: Scripta materialia. 130.2017, 15 March, p. 143-147 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  43. E-pub ahead of print

    Effect of reverted austenite on tensile and impact strength in a martensitic stainless steel: An in-situ X-ray diffraction study

    Wießner, M., Gamsjäger, E., van der Zwaag, S. & Angerer, P., 12 Nov 2016, (E-pub ahead of print) In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 682.2017, 13 January, p. 117-125 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Microstructural evolution - experiments and modeling

    Gamsjäger, E., Wießner, M., Militzer, M. & Garcin, T., 6 Oct 2016.

    Research output: Contribution to conference › Poster › Research › peer-review

  45. Published

    Failure of Hot-Dip Galvanized Steel Parts : Versagen von feuerverzinkten Stahlbauteilen

    Panzenböck, M., Mendez Martin, F., Rashkova, B., Schütz, P. & Kaiser, R., Oct 2016, In: Practical metallography = Praktische Metallographie. 53.2016, 10, p. 641-651 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Austenite grain growth investigated by complementary in-situ techniques

    Gamsjäger, E., Tichauer, W., Lederhaas, B., Garcin, T. & Militzer, M., 28 Sept 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  47. E-pub ahead of print

    Curvature determination of embedded silicon chips by in situ rocking curve X-ray diffraction measurements at elevated temperatures

    Angerer, P., Schöngrundner, R., Macurova, K., Wießner, M. & Keckes, J., 28 Sept 2016, (E-pub ahead of print) In: Powder diffraction. 31.2016, 4, p. 267-273 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    A Mean-Field Model for TRIP - Algorithms and Parameter Identification

    Petersmann, M. & Antretter, T., 24 Aug 2016.

    Research output: Contribution to conference › Poster › Research

  49. Published

    Heat capacaties and entropies of molybdates and carbonates

    Gamsjäger, E. & Gamsjäger, H., 25 Jul 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  50. Published

    Irreversible thermodynamics applied to diffusional phase transformations

    Gamsjäger, E. & Kircher, V. (Co-editor), 29 Jun 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  51. Published

    Strategies for the optimization of computationally generated microstructures in nanocrystalline Ni50Ti

    Petersmann, M., 10 Jun 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  52. Published

    Microwave irradiation as means of alternative rock extraction technology

    Hartlieb, P., Toifl, M. & Grafe, B., 19 May 2016.

    Research output: Contribution to conference › Presentation › Research

  53. E-pub ahead of print

    New approach for the simulation of chain drive dynamics with consideration of the elastic environment

    Grinschgl, M., Reich, F. M., Abeltshauser, R., Eder, M. & Antretter, T., 5 May 2016, (E-pub ahead of print) In: Proceedings of the Institution of Mechanical Engineers Engineers, Part K, Journal of multi-body dynamics. 231.2017, 3, p. 103-120 18 p.

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    Numerical study of the influence of irradiation parameters on the microwave-induced stresses in granite for industrial applications

    Toifl, M., Hartlieb, P., Meisels, R., Antretter, T. & Kuchar, F., 11 Apr 2016.

    Research output: Contribution to conference › Presentation › Research

  55. Published

    Numerical study of the influence of irradiation parameters on the microwave-induced stresses in granite for industrial applications

    Toifl, M., Hartlieb, P., Meisels, R., Antretter, T. & Kuchar, F., 11 Apr 2016, Comminution '16 - Proceedings.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  56. Published

    Size-dependent surface energies of Au nanoparticles

    Holec, D., Dumitraschkewitz, P., Fischer, F. D. & Vollath, D., 11 Apr 2016, p. 1-13. 13 p.

    Research output: Contribution to conference › Presentation › Research

  57. Published

    In-situ Observation of Cross- Sectional Microstructural Changes and Stress Distributions in Fracturing TiN Thin Film during Nanoindentation

    Zeilinger, A., Todt, J., Krywka, C., Müller, M., Ecker, W., Sartory, B., Meindlhumer, M., Stefenelli, M., Daniel, R., Mitterer, C. & Keckes, J., 7 Mar 2016, In: Scientific reports (London : Nature Publishing Group). 6:22670, p. 1-14 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  58. Published

    Eigenspannungsoptimiertes Richtkonzept: Anwendung auf Langprodukte

    Kaiser, R., Antretter, T. & Buchmayr, B., 5 Mar 2016, Tagungsgband XXXV. Verformungskundliches Kolloquium 2016: Tagungsband. Buchmayr, B. (ed.). Leoben: Montanuniversität Leoben, Lehrstuhl für Umformtechnik, p. 153-159 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  59. E-pub ahead of print

    3D numerical study on microwave induced stresses in inhomogeneous hard rocks

    Toifl, M., Meisels, R., Hartlieb, P., Kuchar, F. & Antretter, T., 18 Jan 2016, (E-pub ahead of print) In: Minerals engineering. 90.2016, May, p. 29-42 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  60. Published

    Analyse eines Wälzlagerprüfstands hinsichtlich Steifigkeit und dynamischer Belastung

    Zellhofer, M., 2016

    Research output: Thesis › Diploma Thesis

  61. Published

    A new Treatment of transient grain growth

    Svoboda, J., Fratzl, P., Zickler, G. & Fischer, F. D., 2016, In: Acta materialia. 115, p. 442-447

    Research output: Contribution to journal › Article › Research › peer-review

  62. Published

    A Self-Consistent Model for Thermodynamics of Multicomponent Solid Solutions

    Svoboda, J. & Fischer, F. D., 2016, In: Scripta materialia. p. 154-157

    Research output: Contribution to journal › Article › Research › peer-review

  63. Published

    A thermokinetic model for Mg-Si couple Formation in Al-Mg-Si alloys

    Svoboda, J., Shan, Y. V., Kozeschnik, E. & Fischer, F. D., 2016, In: Modelling and simulation in materials science and engineering. 24, p. 035021-1-16 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  64. Published

    Calculation of crack driving Forces of surface cracks subjected to rolling/sliding contact

    Krácalik, M., Daves, W. & Antretter, T., 2016, In: Engineering Fracture Mechanics. 152, 2, p. 10-25

    Research output: Contribution to journal › Article › Research › peer-review

  65. Published

    Experimental and theoretical evidence of displacive martensite in an intermetallic Mo-containing Ƴ-TiAl based alloy

    Mayer, S., Petersmann, M., Fischer, F. D., Clemens, H., Waitz, T. & Antretter, T., 2016, In: Acta materialia. 115, p. 242-249 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  66. Published

    Finite element analysis of arbitrarily complex electronics devices

    Gschwandl, M., Fuchs, P., Fellner, K., Antretter, T., Krivec, T. & Tao, Q., 2016, Proceedings of the 18th Electronics Packaging Technology Conference EPTC2016. p. 497-500

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  67. Published

    Fracture and Material Behavior of Thin Film composites

    Kozic, D., Konetschnik, R., Maier-Kiener, V., Schöngrundner, R., Brunner, R., Kiener, D., Antretter, T. & Gänser, H.-P., 2016, 2016 17th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE) . Institute of Electrical and Electronics Engineers, p. 1-6 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  68. Published

    Free edges at bilayered compounds - a short analytical and numerical reconsideration

    Antretter, T., Fischer, F. D., Rammerstorfer, F. G. & Zickler, G. A., 2016, In: Archive of applied mechanics. 86, p. 2053-2061

    Research output: Contribution to journal › Article › Research › peer-review

  69. Published

    Improved thermodynamic Treatment of vacancy-mediated diffusion

    Fischer, F. D., Hackl, K. & Svoboda, J., 2016, In: Acta materialia. 108, p. 347-354

    Research output: Contribution to journal › Article › Research › peer-review

  70. Published

    Influence of the levelling process on the mechanical properties of heavy steel plates

    Kaltenbrunner, T., Antretter, T., Ecker, W., Kaiser, R., Gänser, H.-P. & Parteder, E., 2016, Proceedings of Rolling '16.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  71. Published

    Modeling Concepts for Intermetallic Titanium Aluminides

    Appel, F., Clemens, H. & Fischer, F. D., 2016, In: Progress in materials science. 81, p. 55-124

    Research output: Contribution to journal › Article › Research › peer-review

  72. Published

    Modeling of variant-interaction during bainitic phase transformation

    Ehlenbröker, U., Mahnken, R., Petersmann, M. & Antretter, T., 2016, IOP Conference Series Materials Science and Engineering.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  73. Published

    Numerical simulation of the electrical performance of printed circuit boards under cyclic thermal loads

    Fellner, K., Antretter, T., Fuchs, P. F. & Tao, Q., 2016, In: Microelectronics Reliability. p. 148-155

    Research output: Contribution to journal › Article › Research › peer-review

  74. Published

    Numerical study of microwave induced stress and damage formation in heterogeneous rocks

    Toifl, M., 2016

    Research output: Thesis › Doctoral Thesis

  75. Published

    Precipitate growth in multi-component systems with stress relaxation by diffusion and creep

    Svoboda, J., Fischer, F. D., Riedel, H. & Kozeschnik, E., 2016, In: International journal of plasticity. 82, p. 112 126 p.

    Research output: Contribution to journal › Article › Research › peer-review

  76. Published

    Simulation and optimization of the in-service behavior of coated inserts for turning and milling

    Krajinovic, I., 2016

    Research output: Thesis › Doctoral Thesis

  77. Published

    Simulation des Freiformbiegens von Profilrohren im Automobilbau

    Beulich, N. V., 2016

    Research output: Thesis › Master's Thesis

  78. Published

    Stress Relaxation by Power-Law Creep During Growth of a Misfitting Precipitate

    Fischer, F. D., Svoboda, J., Antretter, T. & Kozeschnik, E., 2016, In: International journal of solids and structures. 96, p. 74-80

    Research output: Contribution to journal › Article › Research › peer-review

  79. Published

    The Mechanics of Tessellations - Bioinspired Strategies for Fracture Resistance

    Fratzl, P., Kolednik, O., Fischer, F. D. & Dean, M. N., 2016, In: Chemical Society Reviews. 45, 2, p. 252-267

    Research output: Contribution to journal › Article › Research › peer-review

  80. Published

    Thermomechanische Simulation des Härteprozesses von wärmebehandelten Grobblechen

    Bacher, B., 2016

    Research output: Thesis › Master's Thesis

  81. Published

    Thermo-physical properties of selected hard rocks and their relation to microwave-assisted comminution

    Hartlieb, P., Toifl, M., Kuchar, F., Meisels, R. & Antretter, T., 2016, In: Minerals engineering. 91.2016, p. 34 - 41 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  82. 2015
  83. E-pub ahead of print

    Cyclic mechanical behavior of thin layers of copper: A theoretical and numerical study

    Fellner, K., Antretter, T., Fuchs, P. & Pelisset, T. M. A., 8 Dec 2015, (E-pub ahead of print) In: The Journal of Strain Analysis for Engineering Design. 51.2016, 2, p. 1-9 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  84. Published

    Special cases of martensite compatibility: A near single-variant habit-plane and the martensite of nanocrystalline NiTi

    Petersmann, M. & Antretter, T., 1 Dec 2015, MATEC Web of Conferences : ESOMAT 2015 – 10th European Symposium on Martensitic Transformations . Schryvers, N. & Van Humbeeck, J. (eds.). 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  85. Published

    Calculating entropies of alkaline earth metal molybdates

    Gamsjäger, E., Morishita, M. & Gamsjäger, H., 18 Nov 2015, In: Monatshefte für Chemie = Chemical monthly.

    Research output: Contribution to journal › Article › Research › peer-review

  86. Published

    Crystallographic aspects of phase transformations in intermetallics and steels

    Petersmann, M., Antretter, T. & Ehlenbröcker, U., 4 Nov 2015.

    Research output: Contribution to conference › Presentation › Research

  87. Published

    Modeling of variant-interaction during bainitic phase transformation

    Ehlenbröcker, U. & Petersmann, M., 10 Oct 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  88. E-pub ahead of print

    Analysis of the mobility of migrating austenite–ferrite interfaces

    Gamsjäger, E., Wiessner, M., Schider, S., Chen, H. & van der Zwaag, S., 11 Sept 2015, (E-pub ahead of print) In: Philosophical magazine. 95.2015, 26, p. 2899-2917 19 p.

    Research output: Contribution to journal › Article › Research › peer-review

  89. Published

    Modelling of Precipitation in High Strength Creep Resistant Steels

    Antretter, T., Fischer, F. D., Kozeschnik, E. & Svoboda, J., 10 Aug 2015.

    Research output: Contribution to conference › Presentation › Research

  90. Published

    An inverse finite element approach to calculate full-field forming strains

    Ritt, R., Machado, M., Fischlschweiger, M., Major, Z. & Antretter, T., Jul 2015, Key engineering materials. Vol. 651-653.2015. p. 363-368 6 p. (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  91. Published

    Evolution of reverted austenite and martensite during thermal processing of chromium stainless steels

    Gamsjäger, E., Wiessner, M., Gruber, M. & van der Zwaag, S., 30 Jun 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  92. Published

    The kinetics of diffusive phase transformations in the light of trans-interface diffusion

    Gamsjäger, E. & Rettenmayr, M., 28 Jun 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  93. E-pub ahead of print

    A New Self-Consistent Model for Thermodynamics of Binary Solutions

    Svoboda, J., Shan, Y. V. & Fischer, F. D., 15 Jun 2015, (E-pub ahead of print) In: Scripta materialia. 108.2015, November, p. 27-30 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  94. Published

    The relation of temperature, microwave absorbing properties and thermo - dynamic behavior of selected hard rocks

    Hartlieb, P., Toifl, M., Meisels, R., Antretter, T. & Kuchar, F., 11 Jun 2015, Physical Separation 15 - Proceedings.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  95. Published

    The relation of temperature, microwave absorbing properties and thermo-dynamic properties of selected hard rocks

    Hartlieb, P., Toifl, M., Meisels, R., Antretter, T. & Kuchar, F., 11 Jun 2015.

    Research output: Contribution to conference › Presentation › Research

  96. Published

    Tissue growth controlled by geometric boundary conditions: A simple model recapitulating aspects of callus formation and bone healing

    Fischer, F.-D., Zickler, G., Dunlop, J. W. C. & Fratzl, P., 6 Jun 2015, In: Journal of the Royal Society Interface. 12.2015, 107, 8 p., 20150108.

    Research output: Contribution to journal › Article › Research › peer-review

  97. Published

    NUMERICAL ANALYSIS OF THE ROCK CUTTING PROCESS BASED ON A TWO PARAMETER DESCRIPTION OF TENSILE STRENGTH USING THE WEIBULL THEORY

    Mikl-Resch, M. J., Tichy, R., Antretter, T., Pittino, G., Galler, R., Ecker, W., Gimpel, M. & Kargl, H., 13 May 2015. 5 p.

    Research output: Contribution to conference › Presentation › Research › peer-review

  98. Published

    NUMERICAL ANALYSIS OF THE ROCK CUTTING PROCESS BASED ON A TWO PARAMETER DESCRIPTION OF TENSILE STRENGTH USING THE WEIBULL THEORY

    Mikl-Resch, M. J., Antretter, T., Tichy, R., Pittino, G., Galler, R., Ecker, W., Gimpel, M. & Kargl, H., 10 May 2015, ISRM 2015_PROCEEDINGS. 5 p. 724

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  99. Published

    NUMERICAL ANALYSIS OF THE ROCK CUTTING PROCESS BASED ON A TWO PARAMETER DESCRIPTION OF TENSILE STRENGTH USING THE WEIBULL THEORY

    Mikl-Resch, M. J., Antretter, T., Tichy, R., Pittino, G., Galler, R., Ecker, W., Gimpel, M. & Kargl, H., 10 May 2015. 5 p.

    Research output: Contribution to conference › Poster › Research

  100. Published

    Fracture mechanics of thin film systems on the sub-micron scale

    Kozic, D., Treml, R., Schongrundner, R., Brunner, R., Kiener, D., Zechner, J., Antretter, T. & Ganser, H. P., 6 May 2015, 2015 16th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2015. Institute of Electrical and Electronics Engineers, 7103088

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  101. Published

    Characterization of stainless steels by means of high temperature X-­ray diffraction

    Gamsjäger, E., Wiessner, M. & Angerer, P., 30 Apr 2015, Stainless Steel Conference 2015-Proceedings.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  102. Published

    Comparison of Different Methods for Stress and Deflection Analysis in Embedded die Packages during the Assembly Process

    Macurova, K., Bermejo, R., Pletz, M., Schöngrundner, R., Antretter, T., Krivec, T., Morianz, M., Brizoux, M. & Lecavelier, A., 1 Apr 2015, In: Journal of Microelectronics and Electronic Packaging. 12.2015, 2, p. 80-85 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  103. Published

    Stress, deformation and diffusion interactions in solids - A simulation study

    Fischer, F. D. & Svoboda, J., 26 Feb 2015, In: Journal of the mechanics and physics of solids. 78, p. 427-442 16 p., 2612.

    Research output: Contribution to journal › Article › Research › peer-review

  104. Published

    3D numerical study on microwave induced stresses in inhomogeneous hard rocks

    Toifl, M., Meisels, R., Hartlieb, P., Kuchar, F. & Antretter, T., 2015.

    Research output: Contribution to conference › Presentation › Research

Previous 1 2 3 4 5 6 7 8 9 Next
View graph of relations

Contact information

Franz-Josef-Strasse 18/III, 8700 Leoben
  • Main phone number: +43 3842 402 4001