Chair of Functional Materials and Materials Systems (425)

Organisational unit: Chair

551 - 600 out of 682Page size: 50

Research output

  1. 2013
  2. Published

    59. Metallkunde-Kolloquium - Abstractband

    Mitterer, C. (Editor) & Clemens, H. (Editor), 2013, Eigenverlag.

    Research output: Book/Report › Anthology › Research

  3. Published

    Adhesion tendency of polymers to hard coatings

    Rebelo De Figueiredo, M., Bergmann, C., Ganser, C., Teichert, C., Kukla, C. & Mitterer, C., 2013, In: International polymer processing. 28, 4, p. 415-420 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    AlCr(Si,B)N – Design and Performance of Quaternary Nitride Coatings

    Tritremmel, C., 2013, 143 p.

    Research output: Thesis › Doctoral Thesis

  5. Published

    Alloy-based design of materials from first principles: an application to functional hard coatings

    Holec, D., Zhou, L., Rachbauer, R. & Mayrhofer, P. H., 2013, Density Functional Theory. p. 259-284

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  6. Published

    Alloying-related trends from first principles: An application to the Ti-Al-X-N system

    Holec, D., Zhou, L., Rachbauer, R. & Mayrhofer, P. H., 2013, In: Journal of applied physics. 113, p. 113510-1-113510-8

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    C2H6 as precursor for low pressure chemical vapor deposition of TiCNB hard coatings

    Czettl, C., Mitterer, C., Penoy, M., Michotte, C. & Kathrein, M., 2013, In: Surface & coatings technology. 215, p. 127-132

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Cross-sectional X-ray nanobeam diffraction analysis of a compositionally graded CrNx thin film

    Bartosik, M., Daniel, R., Mitterer, C., Matko, I., Burghammer, M., Mayrhofer, P. H. & Keckes, J., 2013, In: Thin solid films. 542, p. 1-4

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Design of CVD Coatings for Cutting Tools

    Czettl, C., 2013, 93 p.

    Research output: Thesis › Doctoral Thesis

  10. Published

    Diffusion studies in epitaxial TiN/Cu layers on MgO(001)

    Mühlbacher, M., Sartory, B., Keckes, J., Lu, J., Hultman, L. & Mitterer, C., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  11. Published

    Drifting potential humps in ionization zones: The "propeller blades" of high power impulse magnetron sputtering

    Anders, A., Panjan, M., Franz, R., Andersson, J. & Ni, P., 2013, In: Applied physics letters. 103, p. 144103-1-144103-4

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Dry-Blasting of alpha- and k-Al2O3 CVD hard coatings: Friction behaviour and thermal stress relaxation

    Schalk, N., Mitterer, C., Czettl, C., Sartory, B., Penoy, M. & Michotte, C., 2013, In: Tribology Letters. 51, p. 147-154

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Einfluss der Targetkorngröße auf die Eigenschaften von Ti-Al-N Hartstoffschichten

    Großmann, B., 2013

    Research output: Thesis › Diploma Thesis

  14. Published

    First principles study of alloying trends in Ti-Al-N and Cr-Al-N systems

    Holec, D., Zhou, L., Rachbauer, R. & Mayrhofer, P. H., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  15. Published

    First-principles study of elastic properties of cubic Cr1-xAlxN alloys

    Zhou, L., Holec, D. & Mayrhofer, P. H., 2013, In: Journal of applied physics. 113, p. 043511-1-043511-8

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Friction reduction by thermal treatment of arc evaporated TiAlTaN coatings in methane

    Schalk, N., Mitterer, C., Letovsky-Papst, I., Czettl, C., Sartory, B., Penoy, M. & Michotte, C., 2013, In: Tribology International. 67, p. 54-60

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Hardness and elastic modulus of hard coatings at high temperatures

    Rebelo de Figueiredo, M., Tkadletz, M., Hollerweger, R., Harris, A. J., Abad, M., Mayrhofer, P. H., Mitterer, C. & Hosemann, P., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  18. Published

    Herstellung und Charakterisierung von Eisen-Zink-Phasen

    Ritt, T., 2013, 67 p.

    Research output: Thesis › Diploma Thesis

  19. Published

    Industrial-scale sputter deposition of Cr1-xAlxN coatings with 0.21<x <0.74 from segmented targets

    Weirather, T., Czettl, C., Polcik, P., Kathrein, M. & Mitterer, C., 2013, In: Surface & coatings technology. 232, p. 303-310

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Industrial-scale sputter deposition of Cr1-xAlxN coatings with various compositions from segmented powder-metallurgical targets

    Weirather, T., Grasser, S., Czettl, C., Polcik, P., Kathrein, M. & Mitterer, C., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  21. Published

    Influence of Al and Si content on structure and mechanical properties of arc evaporated Al-Cr-Si-N thin films

    Tritremmel, C., Daniel, R., Lechthaler, M., Pocik, P. & Mitterer, C., 2013, In: Thin solid films. 534, p. 403-409

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Influence of CrN and AlN layer thicknesses on structure and mechanical properties of CrN/AlN superlattices

    Schlögl, M., Mayer, B., Paulitsch, J. & Mayrhofer, P., 2013, In: Thin solid films. 545, p. 375-379

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Influence of Fe impurities on structure and properties of arc-evaporated AlCrN coatings

    Mühlbacher, M., Franz, R., Paulitsch, J., Rudigier, H., Polcik, P., Mayrhofer, P. H. & Mitterer, C., 2013, In: Surface & coatings technology. 215, p. 96-103

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Influence of the bilayer period on the structure of AlN and the mechanical properties of CrN/AlN multilayer coatings

    Mayrhofer, P. H., Schlögl, M., Mayer, B., Chawla, V. & Holec, D., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  25. Published

    Insights into the atomic and electronic structure triggered by ordered nitrogen vacancies in CrN

    Zhang, Z., Li, H., Daniel, R., Mitterer, C. & Dehm, G., 2013, In: Physical review : B, Condensed matter and materials physics. 87, p. 0141041-0141049

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Interfacial and inter- diffusion studies of epitaxial TiN/Cu layers on MgO (001) - A comprehensive approach by high resolution TEM and APT

    Mühlbacher, M., Mendez Martin, F., Sartory, B., Keckes, J., Lu, J., Lars, H. & Mitterer, C., 2013.

    Research output: Contribution to conference › Presentation › Research › peer-review

  27. Published

    Ion charge state distributions of Al and Cr in cathodic arc plasmas from composite cathodes in vacuum, argon, nitrogen and oxygen

    Franz, R., Polcik, P. & Anders, A., 2013, In: IEEE Transactions on Plasma Science. 41, p. 1929-1937

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Magnetic field strength influence on the reactive magnetron sputter deposition of Ta2O5

    Hollerweger, R., Holec, D., Paultisch, J., Rachbauer, R., Polcik, P. & Mayrhofer, P. H., 2013, In: Journal of physics / D, Applied physics. 46, p. 335203-335210

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Microstructure and thermal stability of corundum-type (Al0.5Cr0.5)2O3 solid solution coatings grown by cathodic arc evaporation

    Edlmayr, V., Pohler, M., Letovsky-Papst, I. & Mitterer, C., 2013, In: Thin solid films. 534, p. 373-379

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Origins of microstructure and stress gradients in nanocrystalline thin films: The role of growth parameters and self-organization

    Daniel, R., Keckes, J., Matko, I., Burghammer, M. & Mitterer, C., 2013, In: Acta materialia. 61, p. 6255-6266

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Phase stability, mechanical properties and thermal stability of Y alloyed Ti-Al-N coatings

    Riedl, H., Holec, D., Rachbauer, R., Polcik, P., Hollerweger, R., Paulitsch, J. & Mayrhofer, P. H., 2013, In: Surface & coatings technology. 235, p. 174-180

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Phase stability, structural and elastic properties of ternary Cr1-xTMxN alloys: An Ab-inintio study

    Zhou, L., Holec, D. & Mayrhofer, P. H., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  33. Published

    Phase stability, thermal stability and oxidation resistance of arc evaporated Ti-Al-Ta-N coatings

    Hollerweger, R., Arndt, M., Rachbauer, R., Polcik, P., Paultisch, J. & Mayrhofer, P. H., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  34. Published

    Process and materials science aspects for the development of hard coatings for cutting tools

    Weirather, T., 2013

    Research output: Thesis › Doctoral Thesis

  35. Published

    Self-organized periodic soft-hard nanolamellae in polycrystalline TiAlN thin films

    Keckes, J., Daniel, R., Mitterer, C., Matko, I., Sartory, B., Köpf, A., Weißenbacher, R. & Pitonak, R., 2013, In: Thin solid films. 545, p. 29-32

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Sputtered polymeric hydrogenated amorphous carbon thin films for temporary medical implants

    Pachlhofer, J., 2013, 52 p.

    Research output: Thesis › Diploma Thesis › peer-review

  37. Published

    Stabilization criteria for cubic AlN in TiN/AlN and CrN/AlN bi-layer systems

    Chawla, V., Holec, D. & Mayrhofer, P. H., 2013, In: Journal of physics / D, Applied physics. 46, p. 045305-1-045305-8

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Substitution of Thoria Additions by Lanthanum-Oxide Doping in Electrodes for Atmospheric Plasma Spraying

    Heißl, M., 2013

    Research output: Thesis › Diploma Thesis

  39. Published

    Synthesis and post-treatment of hard coatings for cemented carbide cutting tools

    Schalk, N., 2013

    Research output: Thesis › Doctoral Thesis

  40. Published

    Thermal stability and mechanical properties of arc evaporated Ti-Al-Zr-N hard coatings

    Glatz, S., 2013

    Research output: Thesis › Diploma Thesis

  41. Published

    Thermal stability and oxidation resistance of TiAlN/TaAlN multilayer coatings

    Paulitsch, J., Koller, C., Hollerweger, R., Rachbauer, R., Polcik, P. & Mayrhofer, P. H., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  42. Published

    Transmission electron microscopy characterization of CrN films on MgO(001)

    Harzer, T. P., Daniel, R., Mitterer, C., Dehm, G. & Zhang, Z. L., 2013, In: Thin solid films. 545, p. 154-160 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Using pulsed and modulated photothermal radiometry to measure the thermal conductivity of thin films

    Kusiak, A., Martan, J., Battaglia, J.-L. & Daniel, R., 2013, In: Thermochimica Acta. 556, p. 1-5

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    V-alloyed ZrO2 coatings with temperature homogenization function for high-temperature sliding contacts

    Jantschner, O., Walter, C., Muratore, C., Voevodin, A. A. & Mitterer, C., 2013, In: Surface & coatings technology. 228, p. 76-83

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Vanadium containing self-adaptive low-friction hard coatings for high-temperature applications: a review

    Franz, R. & Mitterer, C., 2013, In: Surface & coatings technology. 228, p. 1-13

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    X-ray analysis of residual stress gradients in TiN coatings by a Laplace space approach and cross-sectional nanodiffraction: a critical comparison

    Steffenelli, M., Todt, J., Riedl, A., Ecker, W., Müller, T., Daniel, R., Burghammer, M. & Keckes, J., 2013, In: Journal of applied crystallography. 46, p. 1-8

    Research output: Contribution to journal › Article › Research › peer-review

  47. 2012
  48. E-pub ahead of print

    Impact of hydrogen-assisted heat treatments on microstructure and transformation path in a Ni-rich NiTi shape memory alloy

    Kuběnová, M., Zálešák, J., Čermák, J. & Dlouhý, A., 13 Aug 2012, (E-pub ahead of print) In: Journal of alloys and compounds. 577.2013, Supplement 1, p. S287-S290 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    58. Metallkunde-Kolloquium - Abstractband

    Mitterer, C. (Editor), Clemens, H. (Editor) & Kneißl, A. (Editor), 2012, Eigenverlag.

    Research output: Book/Report › Anthology › Research

  50. Published

    Adhesion of polymers to hard coatings

    Rebelo De Figueiredo, M., Bergmann, C., Ganser, C., Teichert, C. & Mitterer, C., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  51. Published

    A novel approach for determining fracture toughness of hard coatings on the micrometer scale

    Riedl, A., Daniel, R., Steffenelli, M., Schöberl, T., Kolednik, O., Mitterer, C. & Keckes, J., 2012, In: Scripta materialia. 67, p. 708-711

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Carbon doped alpha-Al2O3 coatings grown by chemical vapor deposition

    Hochauer, D., Mitterer, C., Penoy, M., Puchner, S., Michotte, C., Martinz, H. P., Hutter, H. & Kathrein, M., 2012, In: Surface & coatings technology. 206, p. 4771-4777

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1...8 9 10 11 12 13 14 Next
View graph of relations

Contact information

Roseggerstraße 12 / Max-Tendler-Straße 9, 8700 Leoben
  • Main phone number: +43 3842 402 4201