Chair of Ferrous Metallurgy (220)

Organisational unit: Chair

401 - 500 out of 1,066Page size: 100

Research output

  1. 2017
  2. Published

    Thermodynamische Untersuchung der Fe-Ecke des Fe-C-Si-Mn Systems

    Romankiewicz, M., 2017

    Research output: Thesis › Master's Thesis

  3. Published

    Untersuchungen des Ausscheidungsverhaltens von H-Karbiden in einer kohlenstoffhaltigen TiAl Legierung mittels in- und ex-situ Experimenten

    Burtscher, M., Kirchheimer, K., Weißensteiner, I., Bernhard, C., Lederhaas, B., Klein, T., Mayer, S. & Clemens, H., 2017, Praktische Metallographie Sonderband 51. p. 55-60

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  4. Published

    Untersuchungen zur Fehlerquellenidentifikation an Stahlproben durch Nutzung des SILENOS-Prüfsystems

    Klußmann, Z., 2017

    Research output: Thesis › Master's Thesis

  5. Published

    Untersuchung zur Optimierung von Schweißschlacken für das Lichtbogenhandschweißen mit Fülldrahtelektrode

    Mayer, P. M., 2017

    Research output: Thesis › Master's Thesis

  6. 2016
  7. Published

    A new method for the experimental simulation of surface crack formation in continuous casting

    Krobath, R., Bernhard, C., Ilie, S., Six, J. & Hahn, S., 1 Dec 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  8. Published

    HT-LSCM - A valuable tool for surface microstructure investigations

    Fuchs, N., Krobath, R., Bernhard, C., Ilie, S. & Xia, G., 1 Dec 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  9. Published

    Experimental Simulation of the Interaction of Slag and Hot Metal with Coke at the Bosh Region of Blast Furnace

    Bhattacharyya, A., Schenk, J., Jäger, M., Stocker, H. & Thaler, C., Dec 2016, In: Berg- und hüttenmännische Monatshefte : BHM. p. 1-6

    Research output: Contribution to journal › Article › Research

  10. Published

    Evaluation of the Potential for Reduction of CO2 Emissions at the Secondary Metallurgy

    Gerasev, A., Bundschuh, P., Schenk, J., Viertauer, A., Trummer, B., Arth, G., Rössler, R. & Reisinger, P., 1 Nov 2016, In: RHI bulletin : the journal of refractory innovations. 2016, 1, p. 28-34 7 p.

    Research output: Contribution to journal › Article › Research

  11. Published

    Thermodynamische Modellierung der Schlackenfahrweise in der Sekundärmetallurgie

    Penz, F., Bundschuh, P., Griessacher, T. & Schenk, J., 13 Oct 2016, Schlacken-Symposium 2016: Kreislaufwirtschaft stabil weiter entwickeln. p. 153-166 14 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. Published

    Hydrogen as Reducing Agent in Ironmaking and Steemaking - Status, Potentials, Challenges

    Schenk, J., 4 Oct 2016.

    Research output: Contribution to conference › Presentation › Research

  13. Published

    Austenite grain growth investigated by complementary in-situ techniques

    Gamsjäger, E., Tichauer, W., Lederhaas, B., Garcin, T. & Militzer, M., 28 Sept 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  14. Published

    ANALYSIS OF THE ALKALI DISTRIBUTION IN IRONMAKING REACTORS BY THERMOCHEMICAL MODELLING

    Pichler, A., Schenk, J., Hauzenberger, F., Stocker, H. & Thaler, C., Sept 2016, 7TH EUROPEAN COKE AND IRONMAKING CONGRESS - ECIC 2016, Proceedings.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  15. Published

    EVALUATION OF THE CAPABILITIES OF DIRECT AND SMELTING REDUCTION PROCESSES TO ENHANCE THE ENERGY EFFICIENCY AND TO REDUCE THE CO2 EMISSION OF THE STEEL PRODUCTION IN EUROPE

    Schenk, J. & Lüngen, H.-B., Sept 2016, 7TH EUROPEAN COKE AND IRONMAKING CONGRESS - ECIC 2016, Proceedings. Linz

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  16. Published

    Experimental Simulation of the Interaction of Slag and Hot Metal with Coke at the Bosh Region of Blast Furnace

    Bhattacharyya, A., Schenk, J., Jäger, M., Stocker, H. & Thaler, C., Sept 2016, 7th European Coke and Ironmaking Conference Proceedings.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    In-situ Beobachtung des Verhaltens nichtmetallischer Einschlüsse mittels Hochtemperatur- Laser-Scanning- Konfokalmikroskopie

    Michelic, S. K., Dieguez Salgado, U., Loder, D. & Bernhard, C., Sept 2016, In: Giesserei-Praxis. 67.2016, 9, p. 337-340 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Experimental und numerical investigations on cooling efficiency of Air-Mist nozzles on steel during continuous casting

    Arth, G., Taferner, M., Bernhard, C. & Michelic, S. C., 10 Aug 2016, In: IOP Conference Series: Materials Science and Engineering. 143.2016, 1, 9 p., 012033.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Formation of shrinkage porosity during solidification of steel: Numerical simulation and experimental validation

    Riedler, M., Michelic, S. K. & Bernhard, C., 10 Aug 2016, In: IOP Conference Series: Materials Science and Engineering. 143.2016, 1, 9 p., 012035.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Metallurgical approach of development of a hot crack resistant metal-cored wire

    Stein, H., Schnitzer, R., Posch, G., Bruckner, J. & Presoly, P., Jul 2016.

    Research output: Contribution to conference › Presentation › Research

  21. Published

    Microsegregation Model with Local Equilibrium Partition Coefficients During Solidification of Steels

    You, D., Bernhard, C., Wieser, G. & Michelic, S., Jul 2016, In: Steel research international. 87.2016, 7, p. 840-849 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Systematische Untersuchung der Azikularferritbildung in Stählen

    Loder, D., Michelic, S. K. & Bernhard, C., 28 Jun 2016, In: Berg- und hüttenmännische Monatshefte : BHM. 161.2016, 7, p. 315-320 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Hydrogen as Reducing Agent in Iron and Steel Production - Status, Potentials, Challenges

    Schenk, J., 22 Jun 2016.

    Research output: Contribution to conference › Presentation › Transfer

  24. Published

    Near net shape casting - current status and future perspectives

    Bernhard, C., 22 Jun 2016.

    Research output: Contribution to conference › Presentation › Transfer

  25. Published

    Characterization and Analysis of Non-Metallic Inclusions in Low-Carbon Fe–Mn–Si–Al TWIP Steels

    Liu, H., Liu, J., Michelic, S. K., Shen, S., Su, X., Wu, B. & Ding, H., 15 Jun 2016, In: Steel research international. 87.2016, 12, p. 1723-1732 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Determination of the specific surface area of cokes and chars for simulated process conditions of blast furnace and smelting reduction routes

    Bhattacharyya, A., Schenk, J., Thaler, C. & Stocker, H., Jun 2016, SCANMET V Proceedings.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. Published

    A transient 2D solidification model for defect prevention in the continuous casting process

    Bernhard, C., 25 May 2016.

    Research output: Contribution to conference › Presentation › Research

  28. Published

    Influence of Silicon and Manganese on the Peritectic Range for Steel Alloys

    Presoly, P. & Bernhard, C., 16 May 2016, Proceedings AISTech 2016. Pittsburgh, USA, p. 2497-2506 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  29. Published

    Influence of slag properties on the alkali-cycle of a blast furnace

    Pichler, A., Schenk, J., Hauzenberger, F., Stocker, H. & Thaler, C., 16 May 2016, Proceedings of the AISTech 2016. p. 341-352

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. Published

    Research on continuous casting at University of Leoben - An overview

    Bernhard, C., 11 May 2016.

    Research output: Contribution to conference › Presentation › Transfer

  31. Published

    Charakterisierung der Erstarrungsmechanismen beim Vergießen großer Blöcke mit einem neuen Gießverfahren

    Riedler, M., Michelic, S. & Bernhard, C., 10 May 2016.

    Research output: Contribution to conference › Poster › Research

  32. Published

    Systematische Untersuchung der Azikularferritbildung in Stählen

    Loder, D., 10 May 2016.

    Research output: Contribution to conference › Presentation › Research

  33. Published

    Effect of Alkaline Elements on Coke Structure under Blast Furnace Process Conditions

    Bhattacharyya, A., Schenk, J., Letofsky-Papst, I. & Albering, J., May 2016, Effect of Alkaline Elements on Coke Structure under Blast Furnace Process Conditions.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  34. Published

    Reduction Behavior and Structural Evolution of Iron Ores in Fluidized Bed Technologies—Part 2: Characterization and Evaluation of Worldwide Traded Fine Iron Ore Brands

    Pichler, A., Mali, H., Plaul, J. F., Schenk, J., Skorianz, M. & Weiss, B., May 2016, In: Steel research international. 87.2016, 5, p. 642-652 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    método para remover co2 de gases de descarga, tais como gases de descarga de plantas para produzir ferro bruto ou gases de descarga de plantas de gás síntese

    Jan-Friedemann, P. (Inventor), Johannes, L. S. (Inventor), Kurt, W. (Inventor) & Robert, M. (Inventor), 26 Apr 2016, IPC No. C01B 32/ 50 A I, Patent No. BR112012005539, Priority date 7 Sept 2010, Priority No. WO2010EP63099

    Research output: Patent

  36. Published

    Thermodynamic optimization of individual steel database by means of systematic DSC measurements according the CALPHAD approach

    Presoly, P., Six, J. & Bernhard, C., 14 Apr 2016, In: IOP Conference Series: Materials Science and Engineering. 119, 1, 012013.

    Research output: Contribution to journal › Conference article › peer-review

  37. E-pub ahead of print

    Systematic investigation of acicular ferrite formation on laboratory scale

    Loder, D. & Michelic, S., 6 Apr 2016, (E-pub ahead of print) In: Materials science and technology. 33.2017, 2, p. 162-171 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  38. E-pub ahead of print

    Characteristics of AlN inclusions in low carbon Fe-Mn-Si-Al TWIP steel produced by AOD-ESR method

    Liu, H., Liu, J., Michelic, S. K., Wei, F., Zhuang, C., Han, Z. & Li, S., 18 Mar 2016, (E-pub ahead of print) In: Ironmaking and steelmaking. 43.2016, 3, p. 171-179 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Study on Oxide Inclusion Dissolution in Secondary Steelmaking Slags using High Temperature Confocal Scanning Laser Microscopy

    Michelic, S. K., Goriupp, J., Feichtinger, S., Kang, Y.-B., Bernhard, C. & Schenk, J., Jan 2016, In: Steel research international. 87.2016, 1, p. 57-67 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Anpassung von Mikroseigerungsmodellen durch Heißrissuntersuchungen an erstarrendem Stahl

    Bernhard, M. C., 2016

    Research output: Thesis › Master's Thesis

  41. Published

    Bestimmung von Kriterien zur Beurteilung der Sinterqualität

    Pankratz, C., 2016

    Research output: Thesis › Master's Thesis

  42. Published

    Betriebsmessungen mit dem LIBS-Verfahren zur Bestimmung der Zusammensetzung von LD-Schlacken

    Brunnbauer, C., 2016

    Research output: Thesis › Master's Thesis

  43. Published

    Bewertung des Potenzials nichtmetallischer Einschlüsse zur azikularferritischen Keimung in verschiedenen Stahlgüten

    Mayerhofer, A., Loder, D. & Michelic, S., 2016.

    Research output: Contribution to conference › Poster › Research

  44. Published

    Dissolution kinetics of CaO and MgO in converter steelmaking slags

    Cheremisina, E., 2016

    Research output: Thesis › Doctoral Thesis

  45. Published

    Einfluss der Abkühlbedingungen auf ausgewählte Eigenschaften und Eigenspannungen in warmumgeformten zylindrischen Hohlkörpern

    Frosch, G., 2016

    Research output: Thesis › Master's Thesis

  46. Published

    Einfluss der Mischgutfeuchte, der Korngrößenverteilung und weiteren agglomerationsrelevanten Korneigenschaften von Sintereinsatzmischungen auf den Druckverlust über die Schüttungen und die Sinterleistung

    Griesser, A. S., 2016

    Research output: Thesis › Master's Thesis

  47. Published

    Einfluss der sekundärmetallurgischen Schlackenchemie auf das Auflösungsverhalten von Al2O3 und MA-Spinell Partikeln in ausgewählten Laborversuchen

    Goriupp, J., Schenk, J., Klösch, G. & Alexander, P., 2016, In: Berg- und hüttenmännische Monatshefte : BHM. 161, 3, p. 102 107 p.

    Research output: Contribution to journal › Article › Research

  48. Published

    Ermittlung der spezifischen Wärmekapazität mittels HT-DSC von höher legierten Stählen

    Gruber, B., 2016

    Research output: Thesis › Master's Thesis

  49. Published

    Evaluation of the potential for reduction of CO2-emissions at the secondary metallurgy

    Gerasev, A., 2016

    Research output: Thesis › Master's Thesis

  50. Published

    Formation of shrinkage porosity during solidification of steel: Numerical simulation and experimental validation

    Riedler, M., Michelic, S. & Bernhard, C., 2016, In: IOP Conference Series: Materials Science and Engineering. 143.2016, 1, 8 p., 012035.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Influence of alkalis on the process behavior of iron carriers in different ironmaking reactors

    Pichler, A., 2016

    Research output: Thesis › Doctoral Thesis

  52. Published

    In-situ Beobachtung von Austenitkornwachstum und Phasenumwandlungen in Stählen mittels Hochtemperatur-Laser-Scanning-Konfokal-Mikroskopie

    Fuchs, N., 2016

    Research output: Thesis › Master's Thesis

  53. Published

    In-situ observation of the behaviour of non-metallic inclusions at different interfaces in the system steel-slag-refractory

    Michelic, S., Salgado, U. D. & Bernhard, C., 2016, In: IOP Conference Series: Materials Science and Engineering. 143, 1, p. 012010 1 p.

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    In situ Untersuchung der Keimung von Azikularferrit an nichtmetallischen Einschlüssen in verschiedenen Stahlgüten

    Mayerhofer, A., 2016

    Research output: Thesis › Master's Thesis

  55. Published

    Investigation of metallurgical phenomena related to process and product development by means of High Temperature Confocal Scanning Laser Microscopy

    Diéguez-Salgado, U., Michelic, S. & Bernhard, C., 2016, In: IOP Conference Series: Materials Science and Engineering. 119, 1, 1 p.

    Research output: Contribution to journal › Article › Research › peer-review

  56. Published

    Investigation of the influence of the chemical composition of HSLA steel grades on the microstructure homogeneity during hot rolling in continuous rolling mills using a fast layer model

    Schmidtchen, M., Rimnac, A., Warczok, P., Kozeschnnik, E., Bernhard, C., Bragin, S., Kawalla, R. & Linzer, B., 2016, In: IOP Conference Series: Materials Science and Engineering. 119, 1, p. 12001 1 p.

    Research output: Contribution to journal › Article › Research › peer-review

  57. Published

    Non-metallic inclusions Acting as Potential Nuclei for Acicular Ferrite in Different Steel Grades

    Mayerhofer, A., Loder, D. & Michelic, S., 2016.

    Research output: Contribution to conference › Poster › Research

  58. Published

    Numerical simulation and experimental validation of the formation of shrinkage cavity during solidification of steel

    Riedler, M., Michelic, S. & Bernhard, C., 2016, Conference Proceedings to the 25th Anniversary International Conference on Metallurgy and Materials.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  59. Published

    On the formation potential of acicular ferrite microstructure in different steel grades focusing on the influence of carbon content

    Loder, D., Mayerhofer, A. & Michelic, S., 2016, Proceedings AISTech 2016. p. 2465-2474

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  60. Published

    On the modelling of microsegregation in steels involving thermodynamic databases

    You, D., Bernhard, C., Michelic, S., Wieser, G. & Presoly, P., 2016, IOP Conference Series: Materials Science and Engineering. Vol. 119. p. 012027 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  61. Published

    On the systematic investigation of acicular ferrite on laboratory scale

    Loder, D., 2016

    Research output: Thesis › Doctoral Thesis

  62. Published

    Optimierung der Prozessparameter für die Reduktion von Feineisenerzen mittels Wirbelschichtverfahren

    Spreitzer, D., 2016

    Research output: Thesis › Master's Thesis

  63. Published

    Production of Jumbo Blooms by Semi-Continuous Casting: Challenges, Feasibility and Future Potential

    Michelic, S. & Riedler, M., 2016, In: Berg- und hüttenmännische Monatshefte : BHM. 5, p. 39-44

    Research output: Contribution to journal › Article › Research › peer-review

  64. Published

    Segment Casting-an attractive alternative to ingot casting

    Krajewski, P., Michelic, S. & Riedler, M., 2016, Conference Proceedings to the 2nd Medovar Memorial Symposium.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  65. Published

    Solidification control in casting of heavy ingots by a novel casting process

    Riedler, M., 2016

    Research output: Thesis › Doctoral Thesis

  66. Published

    Statistical optimisation parameter for lean grade self-reducing nuggets by surface response modelling to produce pig iron

    Biswas, C., Samanta, S., Bhattacharyya, A., Ghosh Choudhuri, M. & Dey, R., 2016, In: Transactions of the institutions of mining and metallurgy. Section C, Mineral processing and extractive metallurgy . Transactions of the Institutions of Mining and Metallurgy: Section C, p. 1 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  67. Published

    The influence of manganese on the initial solidification of near-peritectic steel

    Legerer, C., 2016

    Research output: Thesis › Master's Thesis

  68. 2015
  69. Published

    processo e dispositivo para a separação de substância sólidas em formato de partículas de uma corrente de gás

    Johannes, L. S. (Inventor), Norbert, R. (Inventor), Robert, M. (Inventor) & Thomas, E. (Inventor), 15 Dec 2015, IPC No. B01D 50/ 00 A I, Patent No. BRPI0919875, Priority date 29 Sept 2009, Priority No. WO2009EP62605

    Research output: Patent

  70. Published

    método e dispositivo para operação de um processo de redução de fundição

    Johannes, L. S. (Inventor), Kurt, W. (Inventor) & Robert, M. (Inventor), 8 Dec 2015, IPC No. F02C 6/ 00 A I, Patent No. BRPI0919615, Priority date 29 Sept 2009, Priority No. WO2009EP62607

    Research output: Patent

  71. Published

    processo para a produção de aglomerados de condutores de ferro finamente particulados

    Hado, H. (Inventor), Hans, H. S. (Inventor), Johannes, L. S. (Inventor) & Christian, B. (Inventor), 1 Dec 2015, IPC No. C22B 5/ 14 A I, Patent No. BRPI0918140, Priority date 17 Aug 2009, Priority No. WO2009EP60609

    Research output: Patent

  72. Published

    Behavior of Chromium, Nickel, Lead, Zinc, Cadmium, and Mercury in the Blast Furnace - A Critical Review of Literature Data and Plant Investigations

    Trinkel, V., Mallow, O., Thaler, C., Schenk, J., Rechberger, H. & Fellner, J., 19 Nov 2015, In: Industrial and engineering chemistry research. 54, 47, p. 11759-11771 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  73. Published

    Evaluation of the capabilities of direct and smelting reduction processes to enhance the energy efficiency of the steel production in Europe

    Schenk, J., 12 Nov 2015.

    Research output: Contribution to conference › Presentation › Research

  74. Published

    Wasserstoff als Reduktionsmittel für die Eisen‐ und Rohstahlerzeugung – Ist‐Situation, Potentiale und Herausforderungen

    Schenk, J., 11 Nov 2015.

    Research output: Contribution to conference › Presentation › Research

  75. Published

    aparelho para remover o co2 dos gases de exaustão de usinas para produção de ferro gusa.

    Johannes, L. S. (Inventor) & Robert, M. (Inventor), 3 Nov 2015, IPC No. C21B 13/ 00 A I, Patent No. BR212012005399U, Priority date 6 Sept 2010, Priority No. WO2010EP63023

    Research output: Patent

  76. Published

    Thermodynamic optimization of individual steel databases by means of systematic DSC measurement

    Presoly, P., Six, J. & Bernhard, C., 3 Nov 2015, International Conference on Materials, Processing and Product Engineering. Leoben, 8 p. 29

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  77. Published

    Untersuchung des Auflöseverhaltens oxidischer Einschlüsse in CaO-Al2O3-SiO2-MgO Schlacken mittels Hochtemperatur-Laser-Scanning Konfokalmikroskopie

    Michelic, S., Goriupp, J., Feichtinger, S., Kang, Y.-B., Bernhard, C. & Schenk, J., 2 Nov 2015.

    Research output: Contribution to conference › Presentation › Research

  78. Published

    método para o controle de um processo de transformação

    Bernhard, H. S. (Inventor), Franz, W. (Inventor), Harald, F. (Inventor), Heinrich, R. M. (Inventor), Johannes, L. S. (Inventor), Kurt, W. (Inventor) & Stefan, S. (Inventor), 27 Oct 2015, IPC No. C21B 5/ 00 A I, Patent No. BRPI0915069, Priority date 7 May 2009, Priority No. WO2009EP55545

    Research output: Patent

  79. Published

    Effect of variable process conditions on the reactivity, strength and structural features of blast furnace cokes

    Bhattacharyya, A., Rantitsch, G., Schenk, J., Thaler, C. & Stocker, H., 5 Oct 2015, p. 606-607.

    Research output: Contribution to conference › Paper › peer-review

  80. Published

    Kinetics of lime dissolution in steelmaking slags

    Cheremisina, E., Schenk, J., Tappeiner, T., Sormann, A. & Wimmer, G., 5 Oct 2015, Asia Steel International Conference 2015 Proceedings. 2 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  81. Published

    CHALLENGES AND LIMITING FACTOS FOR THE RECYCLING OF STEEL SCRAP IN EUROPE

    Bundschuh, P. & Schenk, J., 1 Oct 2015, MINING THE TECHNOSPHERE: "Drivers and Barriers, Challenges and Opportunities". Lederer, J., Laner, D., Rechberger, H. & Fellner, J. (eds.). 1 ed. Wien, Vol. 1. p. 131-135 5 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  82. Published

    Contribution of the Chair of Ferrous Metallurgy at the Montanuniversitaet Leoben to Enhance the Sustainability of Steel Production and Application

    Schenk, J., Bernhard, C. & Michelic, S., Oct 2015, In: Berg- und hüttenmännische Monatshefte : BHM. 160, 10, p. 489-494

    Research output: Contribution to journal › Article › Research › peer-review

  83. Published

    Reduction Behavior and Structural Evolution of Iron Ores in Fluidized Bed Technologies. Part 1: Method for the Determination

    Skorianz, M., Mali, H., Pichler, A., Plaul, F., Schenk, J. & Weiss, B., 28 Sept 2015, In: Steel research international. 87, 5, p. 633-641 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  84. Published

    A numerical solidification model as link between laboratory experiments and the continuous casting process

    Riedler, M., Arth, G., Bernhard, C., Presoly, P., You, D. & Ilie, S., 24 Sept 2015.

    Research output: Contribution to conference › Presentation › Research

  85. Published

    Formation of shrinkage porosity during solidification of steel: Numerical simulation and experimental validation

    Riedler, M., Michelic, S. & Bernhard, C., 23 Sept 2015, Proceedings of the 2015 International Symposium on Liquid Metal Processing and Casting.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  86. Published

    Production of Jumbo Blooms by Semi-Continuous Casting: Challenges, Feasibility and Future Potential

    Michelic, S. & Riedler, M., 23 Sept 2015, Proceedings of the 2015 International Symposium on Liquid Metal Processing and Casting.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  87. Published

    In-situ observation of the behavior of non-metallic inclusions at different interfaces in the system steel-slag-refractory

    Michelic, S., Dieguez Salgado, U. & Bernhard, C., 21 Sept 2015, LMPC 2015: Proceedings of the 2015 International Symposium on Liquid Metal Processing and Casting. p. 143-152 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  88. Published

    On the importance of thermodynamic investigations for the re-assessment of selected ternary Fe-base systems

    Presoly, P. & Bernhard, C., 20 Sept 2015, Proceedings of the 2015 International Symposium on Liquid Metal Processing and Casting. Leoben, Vol. 2015.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  89. Published

    Charakterisierung von Eisenerzträgern mittels Bildverarbeitung

    Kain - Bückner, B., Hanel, M. & Mali, H., 10 Sept 2015, Mitt. Österr. Miner. Ges..

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  90. Published

    Fabrication of plain carbon steel/high chromium white cast iron bimetal by a liquid–solid composite casting process

    Javaheri, V., Rastegari, H. & Naseri Seftejani, M., Sept 2015, In: International Journal of Minerals, Metallurgy and Materials. p. 950-955 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  91. E-pub ahead of print

    A Novel Devolatilization Technique of Pre-reduction of Iron Ore Using Lean Grade Coal

    Biswas, C., Bhattacharyya, A., Das, G. C., Ghosh Choudhuri, M. & Dey, R., 20 Aug 2015, (E-pub ahead of print) In: Berg- und hüttenmännische Monatshefte : BHM. 161.2016, 3, p. 95-101 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  92. Published

    MODEL DEVELOPMENT OF ADDITIVES DISSOLUTION IN THE BOF PROCESS

    Godinho de Carvalho, D. A., Schenk, J. & Adilson Castro, J., 17 Aug 2015, Conference Proceedings ABM Week, August 17th-21st, 2015, Rio de Janeiro, RJ, Brazil.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  93. Published

    Analysis of Solidification of High Manganese Steels Using Improved Differential Thermal Analysis Method

    Zhuang, C., Liu, J., Bernhard, C. & Presoly, P., 1 Aug 2015, In: Journal of iron and steel research international. 22, 8, p. 709-714 6 p., 8.

    Research output: Contribution to journal › Article › Research › peer-review

  94. Published

    Characterization of Ferrous Burden Material for Use in Ironmaking Technologies/Charakterisierung stuckiger Eisentrager fur den Einsatz in der Eisenerzeugung

    Hanel, M., Schenk, J. F., Mali, H., Hauzenberger, F., Thaler, C. M. & Stocker, H., 1 Jul 2015, In: Berg- und hüttenmännische Monatshefte : BHM. 160, 7, p. 316-319 4 p.

    Research output: Contribution to journal › Article › Research

  95. Published

    Untersuchung der Wirkung von Legierungselementen auf die peritektische Phasenumwandlung in Stählen

    Presoly, P. & Bernhard, C., Jul 2015, In: Berg- und hüttenmännische Monatshefte : BHM. 160, 07, p. 337-341 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  96. Published

    Gas Purging Benefits in the BOF: A Focus on Material Efficiency and CO2 Emission Reduction

    Kollmann, T., Bundschuh, P., Samm, V., Schenk, J. & Kirschen, M., 17 Jun 2015, Procdeedings 2nd European Steel Technology and Application Days ESTAD. Düsseldorf, p. 1-7 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  97. Published

    Experimental und numerical investigations on cooling efficiency in the secondary cooling zone during continuous casting of steel

    Arth, G., Taferner, M. & Bernhard, C., 16 Jun 2015. 7 p.

    Research output: Contribution to conference › Paper

  98. Published

    Simulation des Strangrichtens in einem In-Situ Biegeversuch

    Krobath, R., 19 May 2015.

    Research output: Contribution to conference › Poster › Research › peer-review

  99. Published

    Effect of Interaction Area on the Thermodynamics and Kinetic Modelling of BOF Converter

    Bundschuh, P., Schenk, J., Schütt, S., Sormann, A. & Panhofer, H., 12 May 2015, Proceedings of The 6th International Congress on the Science and Technology of Steelmaking. p. 151 - 154 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  100. Published

    Technologies for Low Carbon Fe-Mn-Si-Al TWIP Steel Smelting

    Liu, J., Liu, H. & Michelic, S., 12 May 2015.

    Research output: Contribution to conference › Poster › Research

  101. Published

    Chemistry vs. Morphology vs. Reducibility — Some (Non-) Existing Correlations

    Hanel, M., Kain-Bückner, B., Schenk, J., Mali, H., Hauzenberger, F., Thaler, C. & Stocker, H., 4 May 2015, AISTech 2015 & ICSTI Proceedings. p. 593-602 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  102. Published

    Experimental Analysis of the Interfacial Wetting Phenomena Between Slag and Coke Surface Under Simulated Conditions of the Bosh Region of Blast Furnace

    Bhattacharyya, A., Schenk, J., Arth, G., Stocker, H. & Thaler, C., 4 May 2015, AISTech 2015 & ICSTI Proceedings. p. 713-721 077_30431-5159

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  103. Published

    Gas Purging Benefits in the BOF: A Focus on Material Efficiency and CO2 Emission Reduction

    Kollmann, T., Bundschuh, P., Samm, V. & Kirschen, M., 4 May 2015, AISTech 2015 & ICSTI Proceedings. p. 2031 - 2040 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Previous 1 2 3 4 5 6 7 8 ...11 Next
View graph of relations

Contact information

Franz-Josef-Strasse 18, 8700 Leoben
  • Main phone number: +43 3842 402 2201