3D multi-site hydrogen evolution reaction catalysts on nanoimprinted surfaces, structured via multi-photon lithography derived masks

Jelinek, A., Neumüller, D., Gammer, C., Eckert, J. & Kiener, D., Apr 2025, In: Materials and Design. 252, 113809.

Research output: Contribution to journal › Article › Research › peer-review

Combined X-ray microdiffraction and micromechanical testing for direct measurement of thin film elastic constants

Janknecht, R., Hahn, R., Koutná, N., Todt, J., Meindlhumer, M., Davidok, A., Riedl, H., Keckes, J. & Mayrhofer, P. H., 15 Feb 2025, In: Materials and Design. 252.2025, April, 11 p., 113720.

Research output: Contribution to journal › Article › Research › peer-review

A high-throughput framework for pile-up correction in high-speed nanoindentation maps

Rossi, E., Duranti, D., Rashid, S., Zitek, M., Daniel, R. & Sebastiani, M., 11 Feb 2025, In: Materials and Design. 251.2025, March, 18 p., 113708.

Research output: Contribution to journal › Article › Research › peer-review

20 kHz X-ray diffraction on Cu thin films explores thermomechanical fatigue at high strain-rates

Ziegelwanger, T., Reisinger, M., Vedad, B., Hlushko, K., Van Petegem, S., Todt, J., Meindlhumer, M. & Keckes, J., 31 Jan 2025, In: Materials and Design. 251.2025, March, 9 p., 113664.

Research output: Contribution to journal › Article › Research › peer-review

Enhanced hydrogen evolution via nano-patterned Pt-based metallic glass and dynamic copper oxide foam formation

Cai, F.-F., Sarac, B., Akman, A., Londoño, J. J., Gümrükcü, S., Schweiger, L., Hantusch, M., Schroers, J., Blatter, A., Gebert, A., Spieckermann, F. & Eckert, J., 12 Dec 2024, In: Materials and Design. 249.2025, January, 11 p., 113530.

Research output: Contribution to journal › Article › Research › peer-review

Assessing the fracture toughness in Tungsten-based nanocomposites: A micro-mechanical approach

Schmuck, K. S., Burtscher, M., Alfreider, M. & Kiener, D., 6 Nov 2024, In: Materials and Design. 247.2024, November, 11 p., 113433.

Research output: Contribution to journal › Article › Research › peer-review

Dispersoid evolution in Al–Zn–Mg alloys by combined addition of Hf and Zr: A mechanistic approach

Wessely, V., Töpfer, U., Basu, I., Schäublin, R. E., Pogatscher, S., Uggowitzer, P. & Löffler, J. F., 6 Oct 2024, In: Materials and Design. 247.2024, November, 17 p., 113366.

Research output: Contribution to journal › Article › Research › peer-review

Glass and nanocrystalline phase formation in CuZrAg alloys: Insights from combinatorial thin film libraries studied by mapping synchrotron X-ray diffraction

Putz, B., Milkovič, O., Mohanty, G., Ipach, R., Pethö, L., Milkovičová, J., Saksl, K. & Michler, J., Aug 2024, In: Materials and Design. 244, 113144.

Research output: Contribution to journal › Article › Research › peer-review

Automatic and time-resolved determination of fracture characteristics from in situ experiments

Schmuck, K. S., Antenreiter, M., Alfreider, M. & Kiener, D., Jul 2024, In: Materials & design. 243.2024, July, 12 p., 113038.

Research output: Contribution to journal › Article › Research › peer-review

Probing local adhesion: A miniaturized multi-photon lithography design demonstrated on silanized vs. untreated surfaces

Jelinek, A., Rossegger, E., Schlögl, S., Kiener, D. & Alfreider, M., Jun 2024, In: Materials and Design. 242.2024, June, 13 p., 112994.

Research output: Contribution to journal › Article › Research › peer-review

Additive manufacturing of 3D yttria-stabilized zirconia microarchitectures

Winczewski, J. P., Zeiler, S., Gabel, S., Maestre, D., Merle, B., Gardeniers, J. G. E. & Susarrey-Arce, A., 1 Feb 2024, In: Materials and Design. 238.2024, February, 11 p., 112701.

Research output: Contribution to journal › Article › Research › peer-review

Nanoscale printed tunable specimen geometry enables high-throughput miniaturized fracture testing

Jelinek, A., Žák, S., Cordill, M. J., Kiener, D. & Alfreider, M., Oct 2023, In: Materials and Design. 234.2023, October, 17 p., 112329.

Research output: Contribution to journal › Article › Research › peer-review

Microstructural refinement by spontaneous recrystallization without prior deformation of a 15-5 PH steel alloy and its mechanism

Ressel, G., Brandl, D., Hönigmann, T., Lukas, M., Stark, A., Gruber, C., Lukas, S., Stockinger, M. & Kozeschnik, E., 27 Sept 2023, In: Materials and Design. 234.2023, October, 11 p., 112370.

Research output: Contribution to journal › Article › Research › peer-review

Mapping strain across Co₈₀Ta₇B₁₃ / Co₆₂Ta₆B₃₂ glassy interfaces

Evertz, S., Zalesak, J., Hans, M., Jansen, H. C., Keckes, J., Sheng, H., Eckert, J. & Gammer, C., 15 Sept 2023, (E-pub ahead of print) In: Materials and Design. 234.2023, October, 7 p., 112327.

Research output: Contribution to journal › Article › Research › peer-review

Design of high-strength martensitic steels by novel mixed-metal nanoprecipitates for high toughness and suppressed hydrogen embrittlement

Moshtaghi, M., Maawad, E., Bendo, A., Krause, A., Todt, J., Keckes, J. & Safyari, M., 14 Sept 2023, (E-pub ahead of print) In: Materials & design. 234.2023, October, 15 p., 112323.

Research output: Contribution to journal › Article › Research › peer-review

Direct observation of crack arrest after bridge notch failure: A strategy to increase statistics and reduce FIB-artifacts in micro-cantilever testing

Zhang, Y., Bartosik, M., Brinckmann, S., Lee, S. & Kirchlechner, C., Sept 2023, In: Materials and Design. 233.2023, September, 7 p., 112188.

Research output: Contribution to journal › Article › Research › peer-review

Ti₄₀Zr₁₀Cu₃₆Pd₁₄ bulk metallic glass as oral implant material

Rezvan, A., Sharifikolouei, E., Soprunyuk, V., Schranz, W., Todt, J., Lassnig, A., Gammer, C., Sifferlinger, N. A., Asci, A., Okulov, I., Schlögl, S., Keckes, J., Najmi, Z., Cochis, A., Scalia, A. C., Rimondini, L., Sarac, B. & Eckert, J., 16 Aug 2023, (E-pub ahead of print) In: Materials and Design. 233.2023, 10 p., 112256.

Research output: Contribution to journal › Article › Research › peer-review

Exploring the high-temperature deformation behavior of monocrystalline silicon – An advanced nanoindentation study

Schaffar, G., Tscharnuter, D. & Maier-Kiener, V., 29 Jul 2023, In: Materials and Design. 2023, 233, 10 p., 112198.

Research output: Contribution to journal › Article › Research › peer-review

Exploring the mechanical properties of additively manufactured carbonrich zirconia 3D microarchitectures

Winczewski, J. P., Zeiler, S., Gabel, S., Susarrey-Arce, A., Gardeniers, J. G. E. & Merle, B., 11 Jul 2023, In: Materials and Design. 232.2023, August, 11 p., 112142.

Research output: Contribution to journal › Article › Research › peer-review

Nanoindentation creep of supercrystalline nanocomposites

Yan, C., Bor, B., Plunkett, A., Domenech, B., Maier-Kiener, V. & Giuntini, D., Jul 2023, In: Materials and Design. 231.2023, July, 14 p., 112000.

Research output: Contribution to journal › Article › Research › peer-review

Precious metal amorphous AgAuSi: Alloy design by swapping gold for silver

Weniger, L.-M., Gammer, C., Niewczas, M., Cordill, M. J., Spieckermann, F., Djemia, P., Faurie, D., Li, C.-H., Lassnig, A., Terziyska, V., Mitterer, C., Eckert, J. & Glushko, O., 17 Jun 2023, In: Materials and Design. 232.2023, August, 11 p., 112099.

Research output: Contribution to journal › Article › Research › peer-review

In situ fragmentation of Al/Al2O3 multilayers on flexible substrates in biaxial tension

Putz, B., Edwards, T. E. J., Huszar, E., Pethö, L., Kreiml, P., Cordill, M. J., Thiaudière, D., Chiroli, S., Faurie, D., Renault, P.-O. & Michler, J., 12 Jun 2023, In: Materials and Design. 232.2023, August, 15 p., 112081.

Research output: Contribution to journal › Article › Research › peer-review

Evaluation of combinatorial algorithms for optimizing highly nonlinear structural problems

Rettl, M., Pletz, M. & Schuecker, C., 28 Apr 2023, (E-pub ahead of print) In: Materials and Design. 230.2023, June, 15 p., 111958.

Research output: Contribution to journal › Article › Research › peer-review

Inverse parameter determination for metal foils in multifunctional composites

Trost, C. O. W., Krobath, M., Žák, S., Hammer, R., Krivec, T., Gänser, H.-P., Trost, T. W., Hohenwarter, A. & Cordill, M. J., 9 Feb 2023, (E-pub ahead of print) In: Materials and Design. 227.2023, March, 13 p., 111711.

Research output: Contribution to journal › Article › Research › peer-review

An improved process scan strategy to obtain high-performance fatigue properties for Scalmalloy®

Schimbäck, D., Mair, P., Kaserer, L., Perfler, L., Palm, F., Leichtfried, G. & Pogatscher, S., 22 Nov 2022, (E-pub ahead of print) In: Materials and Design. 224.2022, December, 11 p., 111410.

Research output: Contribution to journal › Article › Research › peer-review

Interface mediated deformation and fracture of an elastic–plastic bimaterial system resolved by in situ transmission scanning electron microscopy

Alfreider, M., Balbus, G., Wang, F., Zechner, J., Gianola, D. S. & Kiener, D., 14 Sept 2022, (E-pub ahead of print) In: Materials and Design. 223.2022, November, 17 p., 111136.

Research output: Contribution to journal › Article › Research › peer-review

New-generation biocompatible Ti-based metallic glass ribbons for flexible implants

Yüce, E., Zarazúa-Villalobos, L., Ter-Ovanessian, B., Sharifikolouei, E., Najmi, Z., Spieckermann, F., Eckert, J. & Sarac, B., 13 Sept 2022, In: Materials and Design. 223.2022, November, 13 p., 111139.

Research output: Contribution to journal › Article › Research › peer-review

In situ micromechanical analysis of a nano-crystalline W-Cu composite

Burtscher, M., Alfreider, M., Kainz, C., Schmuck, K. S. & Kiener, D., Aug 2022, In: Materials and Design. 220.2022, August, 9 p., 110848.

Research output: Contribution to journal › Article › Research › peer-review

Residual stress distribution of a locally and inductively quenched and tempered 50CrMo4 steel analysed by synchrotron transmission techniques

Jászfi, V., Prevedel, P., Raninger, P., Todt, J., Mevec, D., Godai, Y., Maawad, E. & Ebner, R., 16 Jul 2022, (E-pub ahead of print) In: Materials & design. 221.2022, September, 9 p., 110936.

Research output: Contribution to journal › Article › Research › peer-review

Influence of layer architecture on fracture toughness and specimen stiffness in polymer multilayer composites

Wiener, J., Arbeiter, F., Kolednik, O. & Pinter, G., Jul 2022, In: Materials and Design. 219.2022, July, 10 p., 110828.

Research output: Contribution to journal › Article › Research › peer-review

Structural characterisation of Cu-Zr thin film combinatorial libraries with synchrotron radiation at the limit of crystallinity

Putz, B., Milkovič, O., Mohanty, G., Ipach, R., Pethö, L., Milkovičová, J., Maeder, X., Edwards, T. E. J., Schweizer, P., Coduri, M., Saksl, K. & Michler, J., Jun 2022, In: Materials and Design. 218.2022, June, 12 p., 110675.

Research output: Contribution to journal › Article › Research › peer-review

Influence of grain aspect-ratio on the fracture properties of ultrafine-grained tantalum

Hohenwarter, A., Rockenschaub, M. & Renk, O., Apr 2022, In: Materials and Design. 216.2022, April, 11 p., 110545.

Research output: Contribution to journal › Article › Research › peer-review

Reactive interdiffusion of an Al film and a CoCrFeNi high-entropy alloy

Zhang, Z., Ketov, S. V., Fellner, S., Sheng, H., Mitterer, C., Song, K. K., Gammer, C. & Eckert, J., 10 Mar 2022, In: Materials and Design. 216.2022, April, 8 p., 110530.

Research output: Contribution to journal › Article › Research › peer-review

Effect of crystal orientation on the hardness and strength of piezoelectric LiNbO3 substrates for microelectronic applications

Gruber, M., Leitner, A., Kiener, D., Supancic, P. & Bermejo, R., 2022, In: Materials and Design. 213, 110306.

Research output: Contribution to journal › Article › Research › peer-review

How electron beam melting tailors the Al-sensitive microstructure and mechanical response of a novel process-adapted y-TiAl based alloy

Wimler, D., Käsznar, K., Musi, M., Breuning, C., Markl, M., Keckes, J., Clemens, H., Körner, C. & Mayer, S., 15 Dec 2021, In: Materials and Design. 212.2021, 15 December, 13 p., 110187.

Research output: Contribution to journal › Article › Research › peer-review

Porosity and thickness effect of Pd–Cu–Si metallic glasses on electrocatalytic hydrogen production and storage

Sarac, B., Karazehir, T., Yüce, E., Mühlbacher, M., Sarac, A. S. & Eckert, J., 7 Sept 2021, In: Materials and Design. 210.2021, 15 November, 9 p., 110099.

Research output: Contribution to journal › Article › Research › peer-review

Correlating point defects with mechanical properties in nanocrystalline TiN thin films

Zhang, Z., Ghasemi, A., Koutná, N., Xu, Z., Grünstäudl, T., Song, K., Holec, D., He, Y., Mayrhofer, P. H. & Bartosik, M., Sept 2021, In: Materials and Design. 207.2021, September, p. 1-10 109844.

Research output: Contribution to journal › Article › Research › peer-review

Direct observation of nanocrystal-induced enhancement of tensile ductility in a metallic glass composite

Gammer, C., Rentenberger, C., Beitelschmidt, D., Minor, A. M. & Eckert, J., 9 Jul 2021, In: Materials and Design. 209.2021, 1 November, 6 p., 109970.

Research output: Contribution to journal › Article › Research › peer-review

Observations of crystal strains in filler and QI particles through TEM examination – Effect of processing and grain size

Arregui-Mena, J. D., Worth, R. N., Tunes, M. & Edmondson, P. D., Jun 2021, In: Materials and Design. 204.2021, June, 7 p., 109673.

Research output: Contribution to journal › Article › Research › peer-review

Assessment of grain boundary cohesion of technically pure and boron micro-doped molybdenum via meso-scale three-point-bending experiments

Jakob, S., Hohenwarter, A., Lorich, A., Knabl, W., Pippan, R., Clemens, H. & Maier-Kiener, V., 24 May 2021, In: Materials and Design. 207.2021, September, 8 p., 109848.

Research output: Contribution to journal › Article › Research › peer-review

Machine learning assisted calibration of a ductile fracture locus model

Baltic, S., Asadzadeh, M. Z., Hammer, P., Magnien, J., Gänser, H. P., Antretter, T. & Hammer, R., May 2021, In: Materials and Design. 203.2021, May, 15 p., 109604.

Research output: Contribution to journal › Article › Research › peer-review

Enhanced fracture toughness in ceramic superlattice thin films: On the role of coherency stresses and misfit dislocations

Wagner, A., Holec, D., Mayrhofer, P. H. & Bartosik, M., Apr 2021, In: Materials and Design. 2021, 202, 10 p., 109517.

Research output: Contribution to journal › Article › Research › peer-review

Strength ranking for interfaces between a TiN hard coating and microstructural constituents of high speed steel determined by micromechanical testing

Gsellmann, M., Klünsner, T., Mitterer, C., Krobath, M., Wurmshuber, M., Leitner, H., Ecker, W., Marsoner, S., Maier-Kiener, V., Kiener, D. & Ressel, G., 31 Mar 2021, In: Materials and Design. 204.2021, June, 11 p., 109690.

Research output: Contribution to journal › Article › Research › peer-review

Adhesion evaluation of thin films to dielectrics in multilayer stacks: A comparison of four-point bending and stressed overlayer technique.

Lassnig, A., Putz, B., Hirn, S., Többens, D., Mitterer, C. & Cordill, M. J., 15 Feb 2021, In: Materials and Design. 200, 15 February, 8 p., 109451.

Research output: Contribution to journal › Article › Research › peer-review

The MoN–TaN system: Role of vacancies in phase stability and mechanical properties

Klimashin, F., Lobmaier, L., Koutná, N., Holec, D. & Mayerhofer, P. H., 9 Feb 2021, In: Materials and Design. 202.2021, April, 12 p., 109568.

Research output: Contribution to journal › Article › Research › peer-review

Laser powder bed fusion of an engineering intermetallic TiAl alloy

Schimbäck, D., Braun, J., Leichtfried, G., Clemens, H. & Mayer, S., 22 Jan 2021, (E-pub ahead of print) In: Materials and Design. 201.2021, March, 11 p., 109506.

Research output: Contribution to journal › Article › Research › peer-review

An understanding of hydrogen embrittlement in nickel grain boundaries from first principles

Mai, H. L., Cui, X.-Y., Scheiber, D., Romaner, L. & Ringer, S. P., 2021, In: Materials and Design. 2021, 212, p. 1-16

Research output: Contribution to journal › Article › Research › peer-review

Evolution of stress fields during crack growth and arrest in a brittle-ductile CrN-Cr clamped-cantilever analysed by X-ray nanodiffraction and modelling

Meindlhumer, M., Brandt, L. R., Zalesak, J., Rosenthal, M., Hruby, H., Kopecek, J., Salvati, E., Mitterer, C., Daniel, R., Todt, J., Keckes, J. & Korsunsky, A. M., 28 Nov 2020, (E-pub ahead of print) In: Materials and Design. 2021, 198, 16 p., 109365.

Research output: Contribution to journal › Article › Research › peer-review

Multi-scale interface design of strong and damage resistant hierarchical nanostructured materials

Daniel, R., Meindlhumer, M., Zalesak, J., Baumegger, W., Todt, J., Ziegelwanger, T., Keckes, J., Mitterer, C. & Keckes, J., Nov 2020, In: Materials and Design. 196, November, p. 1-11 109169.

Research output: Contribution to journal › Article › Research › peer-review

Multi-method characterization approach to facilitate a strategy to design mechanical and electrical properties of sintered copper

Wijaya, A., Eichinger, B., Chamasemani, F. F., Sartory, B., Hammer, R., Maier-Kiener, V., Kiener, D., Mischitz, M. & Brunner, R., 28 Sept 2020, (E-pub ahead of print) In: Materials and Design. 2021, 197, 11 p., 109188.

Research output: Contribution to journal › Article › Research › peer-review

Open-cell tungsten nanofoams: Scaling behavior and structural disorder dependence of Young's modulus and flow strength

Zhao, M., Schlueter, K., Wurmshuber, M., Reitgruber, M. & Kiener, D., 26 Sept 2020, In: Materials and Design. 2021, 197, 12 p., 109187.

Research output: Contribution to journal › Article › Research › peer-review

Nanoscale stress distributions and microstructural changes at scratch track cross-sections of a deformed brittle-ductile CrN-Cr bilayer

Meindlhumer, M., Zalesak, J., Ecker, W., Rosenthal, M., Niese, S., Gawlitza, P., Hruby, H., Mitterer, C., Daniel, R., Keckes, J. & Todt, J., 5 Aug 2020, In: Materials & design. 195.2020, October, 16 p., 109023.

Research output: Contribution to journal › Article › Research › peer-review

Warm-forming of pre-aged Al-Zn-Mg-Cu alloy sheet

Österreicher, J. A., Tunes, M. A., Grabner, F., Arnoldt, A., Kremmer, T., Pogatscher, S. & Schlögl, C. M., Aug 2020, In: Materials and Design. 193, p. 108837 1 p., 108837.

Research output: Contribution to journal › Article › Research › peer-review

An analytical solution for the correct determination of crack lengths via cantilever stiffness

Alfreider, M., Kolitsch, S., Wurster, S. & Kiener, D., 27 Jun 2020, In: Materials and Design. 194.2020, September, 3 p., 108914.

Research output: Contribution to journal › Article › Research › peer-review

Fracture properties of thin film TiN at elevated temperatures

Buchinger, J., Löfler, L., Ast, J., Wagner, A., Chen, Z., Michler, J., Zhang, Z., Mayrhofer, P. H., Holec, D. & Bartosik, M., 13 Jun 2020, In: Materials & design. 194.2020, September, p. 1-10 10 p., 108885.

Research output: Contribution to journal › Article › Research › peer-review

Room temperature recovery of cryogenically deformed aluminium alloys

Gruber, B., Grabner, F., Falkinger, G., Schökel, A., Spieckermann, F., Uggowitzer, P. J. & Pogatscher, S., 23 May 2020, In: Materials & design. 193.2020, August, 108819.

Research output: Contribution to journal › Article › Research › peer-review

Thermally activated deformation mechanisms and solid solution softening in W-Re alloys investigated via high temperature nanoindentation

Kappacher, J., Leitner, A., Kiener, D., Clemens, H. & Maier-Kiener, V., 1 Apr 2020, In: Materials and Design. 189.2020, April, 6 p., 108499.

Research output: Contribution to journal › Article › Research › peer-review

Microstructures, mechanical properties and deformation of near-rapidly solidified low-density Fe-20Mn-9Al-1.2C-xCr steels

Zhang, J., Hu, C., Zhang, Y., LI, J., Song, C. & Zhai, Q., 15 Jan 2020, In: Materials and Design. 186.2020, 15 January, 13 p., 108307.

Research output: Contribution to journal › Article › Research › peer-review

Influence of annealing on microstructure and mechanical properties of ultrafine-grained Ti45Nb

Völker, B., Maier-Kiener, V., Werbach, K., Müller, T., Pilz, S., Calin, M., Eckert, J. & Hohenwarter, A., 5 Oct 2019, In: Materials and Design. 179.2019, 5 October, 11 p., 107864.

Research output: Contribution to journal › Article › Research › peer-review

Influence of crystal orientation and Berkovich tip rotation on the mechanical characterization of grain boundaries in molybdenum

Jakob, S., Leitner, A., Lorich, A., Eidenberger-Schober, M., Knabl, W., Pippan, R., Clemens, H. & Maier-Kiener, V., 2 Jul 2019, In: Materials & design. 182.2019, 15 November, p. 1-9 9 p., 107998.

Research output: Contribution to journal › Article › Research › peer-review

Age-hardening of high pressure die casting AlMg alloys with Zn and combined Zn and Cu additions

Stemper, L., Mitas, B., Kremmer, T., Otterbach, S., Uggowitzer, P. J. & Pogatscher, S., 9 Jun 2019, In: Materials & design. 181.2019, 11 p., 107927.

Research output: Contribution to journal › Article › Research › peer-review

Deformation behavior of aluminum pillars produced by Xe and Ga focused ion beams: Insights from strain rate jump tests

Xiao, Y., Maier-Kiener, V., Michler, J., Spolenak, R. & Wheeler, J. M., 7 Jun 2019, In: Materials and Design. 181.2019, November, 11 p., 107914 .

Research output: Contribution to journal › Article › Research › peer-review

Structure-stress relationships in nanocrystalline multilayered Al0.7Cr0.3N/Al0.9Cr0.1N coatings studied by cross-sectional X-ray nanodiffraction

Klima, S., Jäger, N., Hruby, H., Mitterer, C., Keckes, J., Burghammer, M. & Daniel, R., 15 May 2019, In: Materials and Design. 170, p. 1-9 107702.

Research output: Contribution to journal › Article › Research › peer-review

Microstructural origins of the high mechanical damage tolerance of NbTaMoW refractory high-entropy alloy thin films

Tunes, M. A. & Vishnyakov, V. M., 9 May 2019, In: Materials and Design. 170.2019, May, 10 p., 107692.

Research output: Contribution to journal › Article › Research › peer-review

Deformation Behavior of Designed Dual-Phase CuZr Metallic Glasses

Peng, C. X., Sopu, D., Cheng, Y., Song, K. K., Wang, S., Eckert, J. & Wang, L., 16 Feb 2019, In: Materials and Design. 168.2019, 15 April, 107662.

Research output: Contribution to journal › Article › Research › peer-review

Anisotropy of fracture toughness in nanostructured ceramics controlled by grain boundary design

Daniel, R., Meindlhumer, M., Baumegger, W., Todt, J., Zalesak, J., Ziegelwanger, T., Mitterer, C. & Keckes, J., 2019, In: Materials and Design. 161.2019, January, p. 80-85 6 p.

Research output: Contribution to journal › Article › Research › peer-review

Austenite decomposition and carbon partitioning during quenching and partitioning heat treatments studied via in-situ X-ray diffraction

Ebner, S., Suppan, C., Stark, A., Schnitzer, R. & Hofer, C., 2019, In: Materials and Design. 178.2019, September, 107862.

Research output: Contribution to journal › Article › Research › peer-review

Impact of interfaces on the radiation response and underlying defect recovery mechanisms in nanostructured Cu-Fe-Ag

Wurmshuber, M., Frazer, D., Bachmaier, A., Wang, Y., Hosemann, P. & Kiener, D., 1 Nov 2018, (E-pub ahead of print) In: Materials and Design. 160.2018, 15 December, p. 1148-1157 10 p.

Research output: Contribution to journal › Article › Research › peer-review

Fracture mechanics of micro samples: Fundamental considerations

Pippan, R., Wurster, S. & Kiener, D., 5 Sept 2018, In: Materials and Design. 159.2018, 5 December, p. 252-267

Research output: Contribution to journal › Article › Research › peer-review

Incipient plasticity and surface damage in LiTaO₃ and LiNbO₃ single crystals

Gruber, M., Leitner, A., Kiener, D., Supancic, P. & Bermejo, R., 5 Sept 2018, In: Materials and Design. 153, p. 221-231 11 p.

Research output: Contribution to journal › Article › Research › peer-review

Scratch induced thin film buckling for quantitative adhesion measurements

Kleinbichler, A., Pfeifenberger, M. J., Zechner, J., Wöhlert, S. & Cordill, M., 29 May 2018, (E-pub ahead of print) In: Materials and Design. 115.2018, 5 October, p. 203-211 9 p.

Research output: Contribution to journal › Article › Research › peer-review

Essential refinements of spherical nanoindentation protocols for the reliable determination of mechanical flow curves

Leitner, A., Maier-Kiener, V. & Kiener, D., 15 May 2018, In: Materials and Design. 146.2018, May, p. 69-80 12 p.

Research output: Contribution to journal › Article › Research › peer-review

In-situ elastic-plastic fracture mechanics on the microscale by means of continuous dynamical testing

Alfreider, M., Kozic, D., Kolednik, O. & Kiener, D., 27 Mar 2018, (E-pub ahead of print) In: Materials and Design. 148.2018, 15 June, p. 177-187 11 p.

Research output: Contribution to journal › Article › Research › peer-review

Stability and elasticity of metastable solid solutiions and superlattices in the MoN-TaN system: First-principles calculations

Koutná, N., Holec, D., Friák, M., Mayrhofer, P. H. & Šob, M., 14 Feb 2018, In: Materials and Design. 144.2018, April, p. 310-322 13 p.

Research output: Contribution to journal › Article › Research › peer-review

How grain boundary chemistry controls the fracture mode of molybdenum

Leitner, K., Scheiber, D., Jakob, S., Primig, S., Clemens, H., Povoden-Karadeniz, E. & Romaner, L., 9 Jan 2018, In: Materials and Design. 142.2018, 15 March, p. 36-43 8 p.

Research output: Contribution to journal › Article › Research › peer-review

Bimetallic diffusion modeling and temperature regulation during ball milling

Aureli, M., Doumanidis, C. C., Gunduz, I. E., Suliman Hussien, A. G., Liao, Y., Kostoglou, N., Rebholz, C. & Doumanidis, C. C., 2018, In: Materials and Design. p. 233-243

Research output: Contribution to journal › Article › Research › peer-review

Nanoscale residual stress depth profiling by focused ion beam milling and eigenstrain analysis

Korsunsky, A. M., Salvati, E., Lunt, A. G. J., Sui, T., Mughal, Z. M., Daniel, R., Keckes, J., Bemporad, E. & Sebastiani, M., 2018, In: Materials and Design. 145, p. 55-64

Research output: Contribution to journal › Article › Research › peer-review

Novel combustion synthesis of carbon foam‑aluminum fluoride nanocomposite materials

Kostoglou, N., Gunduz, I. E., Isik, T., Ortalan, V., Constantinides, G., Kontos, A. G., Steriotis, T., Ryzhkov, V., Bousser, E., Matthews, A., Doumanidis, C. C., Mitterer, C. & Rebholz, C., 2018, In: Materials and Design. 144, p. 222-228

Research output: Contribution to journal › Article › Research › peer-review

Rapid and partial crystallization to design ductile CuZr-based bulk metallic glass composites

Song, K. K., Han, X., Pauly, S., Qin, Y. S., Kosiba, K., Peng, C. X., Gong, J. H., Chen, P. X., Wang, L., Sarac, B., Ketov, S., Mühlbacher, M., Spieckermann, F., Kaban, I. & Eckert, J., 2018, In: Materials and Design. 139.2018, 5 February, p. 132-140 9 p.

Research output: Contribution to journal › Article › Research › peer-review

Thermostructural observation and adaptive control of fractal structure in ball-milled materials

Kostoglou, N., Aureli, M., Alzaabi, A. S. M., Suliman Hussien, A. G., Doumanidis, C. C., Jaffar, S. M., Gunduz, I. E., Rebholz, C., Liao, Y. & Doumanidis, C. C., 2018, In: Materials and Design. p. 772-782

Research output: Contribution to journal › Article › Research › peer-review

High resolution residual stress gradient characterization in W/TiN-stack on Si(100): Correlating in-plane stress and grain size distributions in W sublayer

Hammer, R., Todt, J., Keckes, J., Sartory, B., Parteder, G., Kraft, J. & Defregger, S., 15 Oct 2017, In: Materials and Design. 132.2017, 15 October, p. 72-78 7 p.

Research output: Contribution to journal › Article › Research › peer-review

Design and control of microstructure and texture by thermomechanical processing of a multi-phase TiAl alloy

Spörk, P., Staron, P., Maawad, E., Schell, N., Klose, J., Clemens, H. & Mayer, S., 5 Oct 2017, In: Materials and Design. 131.2017, 5 October, p. 286-296 11 p.

Research output: Contribution to journal › Article › Research › peer-review

Phase evolution and carbon redistribution during continuous tempering of martensite studied with high resolution techniques

Vieweg, A., Povoden-Karadeniz, E., Ressel, G., Prevedel, P., Wojcik, T., Mendez Martin, F., Stark, A., Keckes, J. & Kozeschnik, E., 4 Oct 2017, (E-pub ahead of print) In: Materials and Design. 136.2017, 15 December, p. 214-222 9 p.

Research output: Contribution to journal › Article › Research › peer-review

On grain boundary segregation in molybdenum materials

Leitner, K., Felfer, P. J., Holec, D., Cairney, J. M., Knabl, W., Lorich, A., Clemens, H. & Primig, S., 11 Sept 2017, (E-pub ahead of print) In: Materials and Design. 135.2017, 5 December, p. 204-212 9 p.

Research output: Contribution to journal › Article › Research › peer-review

Processing of Ti-5553 with improved mechanical properties via an in-situ heat treatment combining selective laser melting and substrate plate heating

Schwab, H., Bönisch, M., Giebeler, L., Gustmann, T., Eckert, J. & Kühn, U., Sept 2017, In: Materials and Design. 130.2017, 15 September, p. 83-89 7 p.

Research output: Contribution to journal › Article › Research › peer-review

The use of femtosecond laser ablation as a novel tool for rapid micro-mechanical sample preparation

Pfeifenberger, M. J., Mangang, M., Wurster, S., Reiser, J., Hohenwarter, A., Pfleging, W., Kiener, D. & Pippan, R., 5 May 2017, In: Materials and Design. 121.2017, 5 May, p. 109-118 10 p.

Research output: Contribution to journal › Article › Research › peer-review

Micro-patterning by thermoplastic forming of Ni-free Ti-based bulk metallic glasses

Bera, S., Sarac, B., Balakin, S., Ramasamy, P., Stoica, M., Calin, M. & Eckert, J., Apr 2017, In: Materials and Design. 120.2017, 15 April, p. 204-211 8 p.

Research output: Contribution to journal › Article › Research › peer-review

Influence of testing orientation on mechanical properties of Ti45Nb deformed by high pressure torsion

Völker, B., Jäger, N., Calin, M., Zehetbauer, M. J., Eckert, J. & Hohenwarter, A., 15 Jan 2017, In: Materials & design. 114.2017, 15 January, p. 40-46 7 p.

Research output: Contribution to journal › Article › Research › peer-review

Nanoindentation testing as a powerful screening tool for assessing phase stability of nanocrystalline high-entropy alloys

Maier-Kiener, V., Schuh, B., George, E. P., Clemens, H. & Hohenwarter, A., 2017, In: Materials and Design. 115.2017, 5 February, p. 479-485 7 p.

Research output: Contribution to journal › Article › Research › peer-review

Hardening of Al-Mg-Si alloys: Effect of trace elements and prolonged natural aging

Werinos, M., Antrekowitsch, H., Ebner, T., Prillhofer, R., Uggowitzer, P. & Pogatscher, S., 5 Oct 2016, In: Materials & design. 107.2016, 5 October, p. 257-268 12 p.

Research output: Contribution to journal › Article › Research › peer-review

Microstructure and mechanical properties of the near-beta titanium alloy Ti-5553 processed by selective laser melting

Schwab, H., Palm, F., Kühn, U. & Eckert, J., 5 Sept 2016, In: Materials & design. 105.2016, 5 September, p. 75-80 6 p.

Research output: Contribution to journal › Article › Research › peer-review

Fracture toughness enhancement of brittle nanostructured materials by spatial heterogeneity: A micromechanical proof for CrN/Cr and TiN/SiOx multilayers

Daniel, R., Meindlhumer, M., Zalesak, J., Sartory, B., Zeilinger, A., Mitterer, C. & Keckes, J., 13 May 2016, (E-pub ahead of print) In: Materials & design. 104.2016, 15 August, p. 227-234 8 p.

Research output: Contribution to journal › Article › Research › peer-review

Microstructure and metallic ion release of pure titanium and Ti-13Nb-13Zr alloy processed by high pressure torsion

Dimić, I., Cvijović-Alagić, I., Völker, B., Hohenwarter, A., Pippan, R., Veljović, D., Rakin, M. & Bugarski, B., 5 Feb 2016, In: Materials & design. 91.2016, 5 February, p. 340-347 8 p.

Research output: Contribution to journal › Article › Research › peer-review

Wetting behaviour of Cu-Ga alloys on 304L steel

Silze, F., Wiehl, G., Kaban, I., Wendrock, H., Gemming, T., Kühn, U., Eckert, J. & Pauly, S., 5 Feb 2016, In: Materials & design. 91.2016, 5 February, p. 11-18 8 p.

Research output: Contribution to journal › Article › Research › peer-review

Microstructure and properties of FeCrMoVC tool steel produced by selective laser melting

Sander, J., Hufenbach, J. K., Giebeler, L., Wendrock, H., Kühn, U. & Eckert, J., 5 Jan 2016, In: Materials & design. 89.2016, 5 January, p. 335-341 7 p.

Research output: Contribution to journal › Article › Research › peer-review

Cross-sectional stress distribution in AlxGa1-xN heterostructure on Si(111) substrate characterized by ion beam layer removal method and precession electron diffraction

Reisinger, M., Zalesak, J., Daniel, R., Tomberger, M., Weiss, J. K., Darbal, A. D., Petrenec, M., Zechner, J., Daumiller, I., Ecker, W., Sartory, B. & Keckes, J., 2016, In: Materials and Design. 106, p. 476-481 6 p.

Research output: Contribution to journal › Article › Research › peer-review

Few-step synthesis, thermal purification and structural characterization of porous boron nitride nanoplatelets

Kostoglou, N., Lukovic, J., Babic, B., Matovic, B., Photiou, D., Constantinides, G., Polychronopoulou, K., Ryzhkov, V., Großmann, B., Mitterer, C. & Rebholz, C., 2016, In: Materials & design. 110, p. 540-548 9 p.

Research output: Contribution to journal › Article › Research › peer-review

On crack propagation in the welded polyolefin pipes with and without the presence of weld beads

Mikula, J., Hutař, P., Nezbedová, E., Lach, R., Arbeiter, F., Ševčík, M., Pinter, G., Grellmann, W. & Náhlík, L., 15 Dec 2015, In: Materials & design. 87, p. 95-104 10 p.

Research output: Contribution to journal › Article › Research › peer-review