Assessment of grain boundary cohesion of technically pure and boron micro-doped molybdenum via meso-scale three-point-bending experiments

Research output: Contribution to journalArticleResearchpeer-review

Authors

External Organisational units

  • PLANSEE SE
  • Erich Schmid Institute of Materials Science

Abstract

Grain boundary engineering plays a major role for controlling the properties of modern high-performance materials. Especially Mo and its alloys have advantageous high-temperature structural properties as well as a number of attractive functional properties. However, depending on the processing state, technically pure Mo is prone to intercrystalline failure at low temperatures. The addition of B and/or C is known to improve interface cohesion, allowing for a targeted improvement of mechanical properties through segregation engineering. In this work, the early stages of crack initiation of technically pure and B micro-doped Mo are investigated by scanning electron microscopy on the tension-loaded surface after three-point-bending of mm-sized specimens. Increased grain boundary cohesion is evident from a drastically reduced relative length of separated interfaces in the B-doped material. The presence of B at the grain boundaries is confirmed via atom probe tomography experiments.

Details

Original languageEnglish
Article number109848
Number of pages8
JournalMaterials and Design
Volume207.2021
Issue numberSeptember
DOIs
Publication statusPublished - 24 May 2021