Martin Pletz

1 - 59 out of 59Page size: 100

Research output

  1. 2024
  2. Published

    Evaluation of existing and introduction of new incremental crack propagation approaches in FEM

    Pletz, M., Frankl, S. M. & Schuecker, C., 3 May 2024, In: Theoretical and Applied Fracture Mechanics. 131.2024, June, 11 p., 104452.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    ConForce: Computation of configurational forces for FEM results

    Rettl, M., Frankl, S. M., Pletz, M., Tauscher, M. & Schuecker, C., 1 Apr 2024, In: SoftwareX. 26.2024, May, 6 p., 101718.

    Research output: Contribution to journal › Article › Research › peer-review

  4. 2023
  5. E-pub ahead of print

    Evaluation of combinatorial algorithms for optimizing highly nonlinear structural problems

    Rettl, M., Pletz, M. & Schuecker, C., 28 Apr 2023, (E-pub ahead of print) In: Materials and Design. 230.2023, June, 15 p., 111958.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Parameter Study on Force Curves of Assembled Electronic Components on Foils during Injection Overmolding Using Simulation

    Hubmann, M., Bakr, M., Groten, J., Pletz, M., Vanfleteren, J., Bossuyt, F., Madadnia, B. & Stadlober, B., 19 Apr 2023, In: Micromachines. 14.2023, 4, 15 p., 876.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Comparing crack density and dissipated energy as measures for off-axis damage in composite laminates

    Drvoderic, M., Gfrerrer, M., Wiener, J., Pinter, G. G., Pletz, M. & Schuecker, C., Apr 2023, In: International Journal of Fatigue. 169.2023, April, 10 p., 107486.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Influence of Injection Molding Parameters on the Peel Strength between Plasma-Treated Fluoropolymer Films and Polycarbonate

    Hubmann, M., Groten, J., Pletz, M., Grießer, T., Plevová, K., Nemitz, W. & Stadlober, B., 21 Mar 2023, In: Polymers. 15.2023, 6, 19 p., 1568.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    A method to reduce computation time in finite element simulations of deep rolling

    Bialowas, J., Pletz, M., Gapp, S. & Maierhofer, J., 2023, In: Procedia Structural Integrity. 46, p. 49-55 7 p.

    Research output: Contribution to journal › Conference article › peer-review

  10. 2022
  11. Published

    Simplified Damage Assessment Tool for Rails and Crossings Based on Standard Wear and RCF Models

    Schnalzger, G., Daves, W., Maierhofer, J., Ossberger, U., Ossberger, H., Bucher, C. & Pletz, M., 16 Dec 2022, In: Metals. 12.2022, 12, 20 p., 2169.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Process Optimization of Injection Overmolding Structural Electronics with Regard to Film Distortion

    Hubmann, M., Madadnia, B., Groten, J., Pletz, M., Vanfleteren, J., Stadlober, B., Bossuyt, F., Kaur, J. & Lucyshyn, T., 22 Nov 2022, In: Polymers. 14.2022, 23, 20 p., 5060.

    Research output: Contribution to journal › Article › Research › peer-review

  13. E-pub ahead of print

    Ingested microplastics: Do humans eat one credit card per week?

    Pletz, M., 19 Nov 2022, (E-pub ahead of print) In: Journal of hazardous materials letters. 3.2022, November, 5 p., 100071.

    Research output: Contribution to journal › Article › Research › peer-review

  14. E-pub ahead of print

    Version 0.2 - CrackDect: Detecting crack densities in images of fiber-reinforced polymers

    Drvoderic, M., Bender, J. J., Pletz, M. & Schuecker, C., 9 Sept 2022, (E-pub ahead of print) In: SoftwareX. 19.2022, July, 2 p., 101198.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Efficient prediction of crack initiation from arbitrary 2D notches

    Rettl, M., Pletz, M. & Schuecker, C., Jun 2022, In: Theoretical and Applied Fracture Mechanics. 119.2022, June, 16 p., 103376.

    Research output: Contribution to journal › Article › Research › peer-review

  16. E-pub ahead of print

    Efficient Finite Element Modeling of Steel Cables in Reinforced Rubber

    Pletz, M., Frankl, S. M. & Schuecker, C., 24 May 2022, (E-pub ahead of print) In: Journal of composites science. 6.2022, 6, 20 p., 152.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Combined Crack Initiation and Crack Growth Model for Multi-Layer Polymer Materials

    Pletz, M. & Arbeiter, F. J., 3 May 2022, In: Materials. 15.2022, 9, 13 p., 3273.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Improved concept for iterative crack propagation using configurational forces for targeted angle correction

    Frankl, S. M., Pletz, M. & Schuecker, C., 1 May 2022, In: Engineering Fracture Mechanics. 266.2022, 1 May, 15 p., 108403.

    Research output: Contribution to journal › Article › Research › peer-review

  19. E-pub ahead of print

    Assessing Failure in Steel Cable-Reinforced Rubber Belts Using Multi-Scale FEM Modelling

    Frankl, S. M., Pletz, M., Wondracek, A. & Schuecker, C., 20 Jan 2022, (E-pub ahead of print) In: Journal of composites science. 6.2022, 2, 13 p., 34.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Modeling Stiffness Degradation of Fiber-Reinforced Polymers Based on Crack Densities Observed in Off-Axis Plies

    Drvoderic, M., Pletz, M. & Schuecker, C., Jan 2022, In: Journal of composites science. 6.2022, 1, 15 p., 6010010.

    Research output: Contribution to journal › Article › Research › peer-review

  21. 2021
  22. Published

    CrackDect: Detecting crack densities in images of fiber-reinforced polymers

    Drvoderic, M., Rettl, M., Pletz, M. & Schuecker, C., 13 Oct 2021, In: SoftwareX. 16.2021, December, 6 p., 100832.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Efficient 3d finite element modeling of cyclic elasto-plastic rolling contact

    Meyer, K. A., Skrypnyk, R. & Pletz, M., Sept 2021, In: Tribology International. 161.2021, September, 12 p., 107053.

    Research output: Contribution to journal › Article › Research › peer-review

  24. 2019
  25. Published

    Constitutive modeling of anisotropic plasticity with application to fiber-reinforced composites

    Nagaraja, S. G., Pletz, M. & Schuecker, C., 15 Dec 2019, In: International journal of solids and structures. 180-181.2019, 15 December, p. 84-96 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Cyclic plastic deformation of rails in rolling/sliding contact –quasistatic FE calculations using different plasticity models

    Pletz, M., Meyer, K. A., Künstner, D., Scheriau, S. & Daves, W., 15 Oct 2019, In: Wear. 436-437.2019, 15 October, 10 p., 202992.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Finite element model to describe crack deflection and constrained micro-cracking

    Tauscher, M., Pletz, M., Arbeiter, F. & Schuecker, C., 28 Aug 2019, p. 371-374. 4 p.

    Research output: Contribution to conference › Paper

  28. Published

    Investigation of deformation mechanisms in manganese steel crossings using FE models

    Wiedorn, J., Daves, W., Ossberger, U., Ossberger, H. & Pletz, M., 13 Jun 2019, In: Tribology International. 138.2019, October, p. 424-434 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Real-Time Measurement of Dynamic Wheel-Rail Contacts Using Ultrasonic Reflectometry

    Zhou, L., Brunskill, H., Pletz, M., Daves, W., Scheriau, S. & Lewis, R., 16 Apr 2019, In: Journal of Tribology. 141.2019, 6, 9 p., 061401.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Incremental finite element delamination model for fibre pull-out tests of elastomer-matrix composites

    Frankl, S., Pletz, M. & Schuecker, C., 1 Jan 2019, In: Procedia Structural Integrity. 17, p. 51-57 7 p.

    Research output: Contribution to journal › Conference article › peer-review

  31. Published

    Evaluation of crack initiation from pores in layered materials using a coupled stress-energy criterion

    Schuecker, C., Shevchuk, M., Drvoderic, M. & Pletz, M., 2019.

    Research output: Contribution to conference › Abstract › peer-review

  32. Published

    Finite element model for predicting the initiation of subsurface damage in railway crossings—A parametric study

    Wiedorn, J., Daves, W., Ossberger, U., Ossberger, H. & Pletz, M., 2019, In: Proceedings of the Institution of Mechanical Engineers. Part F, Journal of rail and rapid transit. 2019, 6, p. Pages 614-628

    Research output: Contribution to journal › Article › Research › peer-review

  33. 2018
  34. Published

    Peel strength characterisation on ply/ply interface using wedge and T-peel/pull-type tests

    Satheesh, B., Tonejc, M., Potakowskyj, L., Pletz, M., Fauster, E., Kaynak, B. & Schledjewski, R., 8 Nov 2018, In: Polymers & Polymer Composites (Polymers and polymer composites). 26.2018, 8-9, p. 431-435 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Numerical assessment of materials used in railway crossings by predicting damage initiation – Validation and application

    Wiedorn, J., Daves, W., Ossberger, U., Ossberger, H. & Pletz, M., 18 Aug 2018, In: Wear. 2018, Volumes 414–415, p. 136-150

    Research output: Contribution to journal › Article › Transfer › peer-review

  36. Published

    Calculation of cyclic plastic surface deformations in Rails-quasistatic Fe models

    Pletz, M., Daves, W., Künstner, D. & Scheriau, S., 1 Jan 2018, Proceedings of the 11th International Conference on Contact Mechanics and Wear of Rail/wheel Systems, CM 2018. p. 784-791 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. 2017
  38. Published

    Permeability Customisation through Preform Manipulation Utilising 3D-Printing Technology

    Tonejc, M., Pletz, M., Fauster, E. & Schledjewski, R., 1 Nov 2017, In: Polymers and Polymer Composites. 25.2017, 9, p. 651-660 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Permeability Customisation Through Preform Manipulation Utilizing 3D-Printing Technology

    Tonejc, M., Pletz, M., Fauster, E. & Schledjewski, R., 1 Nov 2017, In: Polymers & Polymer Composites (Polymers and polymer composites). 25.2017, 9, p. 643-652 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  40. E-pub ahead of print

    Simplified explicit finite element model for the impact of a wheel on a crossing – Validation and parameter study

    Wiedorn, J., Daves, W., Ossberger, U., Ossberger, H. & Pletz, M., 18 Mar 2017, (E-pub ahead of print) In: Tribology International. 111.2017, July, p. 254-264 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Study of Influence of Residual Stresses on Crack Propagation in Particulate Ceramic Composites

    Majer, Z., Štegnerová, K., Hutar, P., Pletz, M., Bermejo, R. & Náhlík, L., 2017, Solid State Phenomena . Vol. 258. p. 178-181 4 p. (Solid State Phenomena).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  42. 2016
  43. E-pub ahead of print

    A finite element model to simulate the physical mechanisms of wear and crack initiation in wheel/rail contact

    Daves, W., Kubin, W., Scheriau, S. & Pletz, M., 9 Jun 2016, (E-pub ahead of print) In: Wear. 366-367.2016, 15 November, p. 78-83 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Dynamic Finite Element Model- Impact Force and Contact Pressure for Measured Geometries of Fixed Crossings

    Pletz, M., Ossberger, U., Ossberger, H. & Daves, W., 3 May 2016, The Dynamics of Vehicles on Roads and Tracks - Proceedings of the 24th Symposium of the International Association for Vehicle System Dynamics, IAVSD 2015. p. 1337-1346 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  45. Published

    FE Modelle zur indirekten Bestimmung des Reibkoeffizienten im Stauchversuch

    Brunbauer, S., Kaufmann, A. & Pletz, M., 14 Apr 2016, p. 63-69.

    Research output: Contribution to conference › Paper

  46. Published

    A simplified dynamic finite element model for the impact of a wheel on a crossing: Validation and parameter study

    Wiedorn, J., Daves, W., Ossberger, H. & Pletz, M., 2016, In: Civil-Comp Proceedings. 110

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Evaluation of Mechanical Strength of Miniaturized Functional Substrates and Components in Different Environments

    Bermejo, R., Krautgasser, C., Deluca, M., Pletz, M., Supancic, P., Aldrian, F. & Danzer, R., 2016, In: Journal of Microelectronics and Electronic Packaging. 13, 1, p. 17-22 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Residual lifetime determination of low temperature co-fired ceramics

    Majer, Z., Štegnerová, K., Hutar, P., Pletz, M., Bermejo, R. & Náhlík, L., 2016, Advances in Fracture and Damage Mechanics XV. Trans Tech Publications, Vol. 713. p. 266-269 4 p. (Key Engineering Materials; vol. 713).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  49. 2015
  50. Published

    Mechanical testing and fracture analyses of miniaturized ZnO-based multilayer components

    Macurova, K., Gruber, M., Pletz, M., Supancic, P., Danzer, R., Aldrian, F. & Bermejo, R., 26 Oct 2015

    Research output: Other contribution › Research

  51. Published

    Mechanical characterization of miniaturized functional substrates and components in different environments

    Bermejo, R., Krautgasser, C., Deluca, M., Pletz, M., Supancic, P., Aldrian, F. & Danzer, R., 1 Apr 2015

    Research output: Other contribution › Research

  52. Published

    Stress and Deflection Development During Die Embedding into Printed Circuit Boards

    Macurova, K., Angerer, P., Bermejo, R., Pletz, M., Schöngrundner, R., Antretter, T., Krivec, T., Morianz, M., Brizoux, M. & Lecavelier, A., 2015, In: Materials Today: Proceedings. 2, 2, p. 4196-4205 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  53. 2014
  54. Published

    Multi-scale finite element modeling to describe rolling contact fatigue in a wheel-rail test rig

    Pletz, M., Daves, W., Yao, W., Kubin, W. & Scheriau, S., Dec 2014, In: Tribology International. 80, p. 147-155

    Research output: Contribution to journal › Article › Research › peer-review

  55. Published

    Rolling Contact Fatigue of Three Crossing Nose Materials—Multiscale FE Approach

    Pletz, M., Daves, W., Yao, W. & Ossberger, H., 15 Jun 2014, In: Wear. 314, 1–2, p. 69-77 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  56. Published

    Comparison of different methods for stress and deflection analysis in embedded die packages during the assembly process

    Macurova, K., Bermejo Moratinos, R., Pletz, M., Schöngrundner, R., Antretter, T., Krivec, T., Morianz, M., Brizoux, M. & Lecavelier, A., 1 Jan 2014, Proceedings - 2014 47th International Symposium on Microelectronics, IMAPS 2014. p. 355-360 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  57. Published

    Numerical Analysis of Sub-Critical Crack Growth in Particulate Ceramic Composites

    Majer, Z., Pletz, M., Krautgasser, C., Nalik, L., Hutar, P. & Bermejo Moratinos, R., 2014, In: Procedia Materials Science. 3, p. 2071-2076

    Research output: Contribution to journal › Article › Research › peer-review

  58. 2013
  59. Published

    Multi-physics simulation of the component attachment within embedding process

    Macurova, K., Kharicha, A., Pletz, M., Mataln, M., Bermejo, R., Schongrundner, R., Krivec, T., Antretter, T., Maia, W., Morianz, M. & Brizoux, M., 1 Apr 2013, 14th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2013. Institute of Electrical and Electronics Engineers, p. 1-6 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  60. Published

    A new roughness parameter to evaluate the near-surface deformation in dry rolling/sliding contact

    Kubin, W. K., Pletz, M., Daves, W. & Scheriau, S., 2013, In: Tribology International. 67, p. 132-139

    Research output: Contribution to journal › Article › Research › peer-review

  61. 2012
  62. Published

    A Wheel Passing a Crossing Nose- Dynamic Analysis under High Axle Loads using Finite Element Modelling

    Pletz, M., Daves, W. & Ossberger, H., 10 Oct 2012, In: Proceedings of the Institution of Mechanical Engineers. Part F, Journal of rail and rapid transit. 226, 6, p. 603-611 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  63. Published

    A wheel set/crossing model regarding impact, sliding and deformation-Explicit finite element approach: Wear

    Pletz, M., Daves, W. & Ossberger, H., 2012, In: Wear. 294-295, p. 446-456 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  64. Published

    Damage in Railway Crossings - Numerical Models

    Pletz, M., 2012

    Research output: Thesis › Doctoral Thesis

  65. Published

    Influence of deposited metal structures on the failure mechanisms of silicon-based components

    Deluca, M., Bermejo Moratinos, R., Pletz, M., Wießner, M., Supancic, P. & Danzer, R., 2012, In: Journal of the European Ceramic Society. 32, p. 4371-4380

    Research output: Contribution to journal › Article › Research › peer-review

  66. 2011
  67. Published

    Local strength measurement technique for miniaturised silicon-based components

    Deluca, M., Pletz, M., Morianz, M., Stahr, J., Supancic, P., Danzer, R. & Bermejo, R., 2011, 2011 12th Int. Conf. on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2011. 5765812

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  68. Published

    Numerical investigation of the process of embedding components into printed circuit boards

    Pletz, M., Bermejo, R., Supancic, P., Stahr, J. & Morianz, M., 2011, 2011 12th Int. Conf. on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2011. 5765814

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  69. Published

    Strength and fracture analysis of silicon-based components for embedding

    Deluca, M., Bermejo Moratinos, R., Pletz, M., Supancic, P. & Danzer, R., 2011, In: Journal of the European Ceramic Society. 31, p. 549-558

    Research output: Contribution to journal › Article › Research › peer-review

  70. 2010
  71. Published

    Characterisation and modelling of the mechanical reliability of semiconductor components for Printed Circuit Boards

    Bermejo Moratinos, R., Deluca, M., pletz, M., Supancic, P. & Danzer, R., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  72. Published

    Strength and fracture analysis of silicon chips to be embedded into printed circuit boards

    Deluca, M., Bermejo, R., Pletz, M. & Supancic, P., 2010, 18th European Conference on Fracture: Fracture of Materials and Structures from Micro to Macro Scale.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  73. Published

    Theoretische Untersuchung der Einbettung von keramischen Komponenten in Leiterplatten

    Pletz, M., 2010

    Research output: Thesis › Master's Thesis

View graph of relations

Contact

Phone: 2507

Latest Research Output

View more (59)