Francisca Mendez Martin

(Former)

1 - 74 out of 74Page size: 100

Research output

  1. 2022
  2. Published

    Quench rate sensitivity of age-hardenable Al-Zn-Mg-Cu alloys with respect to the Zn/Mg ratio: An in situ SAXS and HEXRD study

    Graf, G., Spörk-Erdely, P., Staron, P., Stark, A., Mendez Martin, F., Clemens, H. & Klein, T., 1 Apr 2022, In: Acta materialia. 227.2022, 1 April, 12 p., 117727.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    On the existence of orthorhombic martensite in a near-α titanium base alloy used for additive manufacturing

    Fleißner-Rieger, C., Tunes, M. A., Gammer, C., Jörg, T., Pfeifer, T., Musi, M., Mendez Martin, F. & Clemens, H., 15 Mar 2022, In: Journal of alloys and compounds. 897.2022, 15 March, 10 p., 163155.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Precipitation behavior of a Co-free Fe-Ni-Cr-Mo-Ti-Al maraging steel after severe plastic deformation

    Zeisl, S., Lassnig, A., Hohenwarter, A. & Mendez Martin, F., 26 Jan 2022, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 833.2022, 26 January, 9 p., 142416.

    Research output: Contribution to journal › Article › Research › peer-review

  5. 2021
  6. Published

    Rapid solidification and metastable phase formation during surface modifications of composite Al-Cr cathodes exposed to cathodic arc plasma

    Golizadeh Najafabadi, M., Mendez Martin, F., Wurster, S., Mogeritsch, J., Kharicha, A., Kolozsvári, S., Mitterer, C. & Franz, R., 20 Dec 2021, In: JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY. 94:2021, 20 December, p. 147-163 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Cathode spot behavior in nitrogen and oxygen gaseous atmospheres and concomitant cathode surface modifications

    Golizadeh Najafabadi, M., Mendez Martin, F., Kolozsvári, S., Anders, A. & Franz, R., 15 Sept 2021, In: Surface & coatings technology. 421.2021, 15 September, 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Giant hardening response in AlMgZn(Cu) alloys

    Stemper, L., Tunes, M. A., Dumitraschkewitz, P., Mendez Martin, F., Tosone, R., Marchand, D., Curtin, W. A., Uggowitzer, P. & Pogatscher, S., 1 Mar 2021, In: Acta Materialia. 206.2021, March, 19 p., 116617.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Phase constitution in an intermetallic Ti-37Al-10Nb alloy: what we can learn about the phase equilibria

    Rashkova, B., Brabetz, M., Mendez Martin, F., Distl, B., Hauschildt, K., Stein, F. & Clemens, H., 2021.

    Research output: Contribution to conference › Poster › Research

  10. 2020
  11. Published

    Strain aging characterization and physical modelling of over-aging in dual phase steel

    Soliman, M., Shan, Y. V., Mendez Martin, F., Kozeschnik, E. & Palkowski, H., 24 Jun 2020, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 788.2020, 24 June, 13 p., 139595.

    Research output: Contribution to journal › Article › Research › peer-review

  12. E-pub ahead of print

    Insights into surface modification and erosion of multi-element arc cathodes using a novel multilayer cathode design

    Golizadeh Najafabadi, M., Anders, A., Mendez Martin, F., Kolozsvári, S. & Franz, R., 16 Mar 2020, (E-pub ahead of print) In: Journal of applied physics. 127.2020, 11, 10 p., 113301.

    Research output: Contribution to journal › Article › Research › peer-review

  13. E-pub ahead of print

    Heat Treatments and Critical Quenching Rates in Additively Manufactured Al–Si–Mg Alloys

    Hitzler, L., Hafenstein, S., Mendez Martin, F., Clemens, H., Sert, E., Öchsner, A., Merkel, M. & Werner, E., 5 Feb 2020, (E-pub ahead of print) In: Materials. 13.2020, 3, 17 p., 720.

    Research output: Contribution to journal › Article › Research › peer-review

  14. 2019
  15. Accepted/In press

    Solid bitumen in shale reservoirs: a challenge in organic petrography and geochemistry

    Misch, D., Riedl, F., Vranjes-Wessely, S., Horsfield, B., Reischenbacher, D., Ziegs, V., Mendez Martin, F. & Sachsenhofer, R., Oct 2019, (Accepted/In press) New Directions in Geosciences for Unconventional Resources.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  16. Published

    Petrographic and sorption-based characterization of bituminous organic matter in the Mandal Formation, Central Graben (Norway)

    Misch, D., Riedl, F., Liu, B., Horsfield, B., Ziegs, V., Mendez Martin, F., Vranjes-Wessely, S. & Sachsenhofer, R., 18 Jun 2019, In: International journal of coal geology. 211.2019, 1 July, 12 p., 103229.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    In situ analysis of the effect of high heating rates and initial microstructure on the formation and homogeneity of austenite

    Eggbauer, A., Lukas, M., Ressel, G., Prevedel, P., Mendez Martin, F., Keckes, J., Stark, A. & Ebner, R., 22 Mar 2019, In: Journal of materials science. 54.2019, 12, p. 9197-9212 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Solid bitumen in shales: petrographic characteristics and implications for reservoir characterization

    Misch, D., Groß, D., Hawranek, G., Horsfield, B., Klaver, J., Mendez Martin, F., Urai, J., Vranjes-Wessely, S., Sachsenhofer, R., Schmatz, J., Li, J. & Zou, C., 28 Feb 2019, In: International journal of coal geology. 205.2019, 1 March, p. 14-31 18 p.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    High-Resolution characterization of intermetallic TiAI-Powder for additive Manufacturing

    Wimler, D., Gammer, C., Eckert, J., Mendez Martin, F., Lindemann, J., Clemens, H. & Mayer, S., 2019, Euro PM2019 - Powders for AM - Powder Production. p. 1-5

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  20. Published

    Surface modifications on cathode during cathodic arc deposition: phase evaluation

    Golizadeh Najafabadi, M., Mendez Martin, F., Wurster, S., Kolozsvári, S. & Franz, R., 2019.

    Research output: Contribution to conference › Poster › Research

  21. 2018
  22. Published

    Factors controlling shale microstructure and porosity: A case study on Upper Visean Rudov Beds from the Ukrainian Dniepr-Donets Basin: A case study on upper visean rudov beds from the Ukrainian Dneiper-Donets Basin

    Misch, D., Klaver, J., Gross, D., Mayer-Kiener, V., Mendez-Martin, F., Schmatz, J. & Sachsenhofer, R. F., 1 Dec 2018, In: AAPG bulletin. 102, 12, p. 2629-2654 26 p.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Materials characterization with atom probe tomography and high resolution transmission electron microscopy

    Mendez Martin, F., Haberfehlner, G., Albu, M. & Trummer, C., 2018.

    Research output: Contribution to conference › Poster › Research

  24. Published

    Scanning electron microscope: An essential equipment of failure analysis

    Panzenböck, M., Freitag, C., Hawranek, G., Mendez Martin, F. & Rashkova, B., 2018.

    Research output: Contribution to conference › Poster › Research

  25. 2017
  26. E-pub ahead of print

    Phase evolution and carbon redistribution during continuous tempering of martensite studied with high resolution techniques

    Vieweg, A., Povoden-Karadeniz, E., Ressel, G., Prevedel, P., Wojcik, T., Mendez Martin, F., Stark, A., Keckes, J. & Kozeschnik, E., 4 Oct 2017, (E-pub ahead of print) In: Materials and Design. 136.2017, 15 December, p. 214-222 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Atom probe investigations on temper embrittlement and reversible temper embrittlement in S 690 steel weld metal

    Cerjak, H., Mendez Martin, F. & Domakova, M., 2 Jul 2017, In: Science and Technology of Welding and Joining. 23.2018, 2, p. 140-147 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Source rock assessment from basin- to nano-scale: A case study from the Ukrainian Dniepr-Donets Basin

    Misch, D., Groß, D., Klaver, J., Schmatz, J., Sachsenhofer, R., Bechtel, A., Maier-Kiener, V., Kiener, D. & Mendez Martin, F., Mar 2017.

    Research output: Contribution to conference › Abstract › peer-review

  29. Published

    Correlation of local mechanical properties and chemical compositin in a C-containing TiAl alloy studied by nanoindentation and atom probe tomography

    Klein, T., Schachermayer, M., Mendez Martin, F., Schöberl, T., Rashkova, B., Clemens, H. & Mayer, S., 2017.

    Research output: Contribution to conference › Poster › Research

  30. Published

    Werkstoffcharakterisierung mittels hochauflösender dreidimensionaler Atomsondentomographie

    Mayer, S., Maier-Kiener, V., Mendez Martin, F., Panzenböck, M., Rashkova, B. & Clemens, H., 2017, In: Jahresmagazin Materialographie, Metallographie : Ingenieurwissenschaften ... : im Fokus. 2017, p. 56-60 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  31. 2016
  32. Published

    Failure of Hot-Dip Galvanized Steel Parts : Versagen von feuerverzinkten Stahlbauteilen

    Panzenböck, M., Mendez Martin, F., Rashkova, B., Schütz, P. & Kaiser, R., Oct 2016, In: Practical metallography = Praktische Metallographie. 53.2016, 10, p. 641-651 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Nanostructural Investigations on Potential Gas Shales of the Dniepr-Donets Basin (Ukraine)

    Misch, D., Klaver, J., Groß, D., Schmatz, J., Sachsenhofer, R. & Mendez Martin, F., 2 Jun 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  34. Published

    Nanostructural Investigations on Potential Gas Shales of the Dniepr-Donets Basin(Ukraine)

    Misch, D., Klaver, J., Groß, D., Schmatz, J., Sachsenhofer, R. & Mendez Martin, F., Jun 2016.

    Research output: Contribution to conference › Abstract › peer-review

  35. Published

    TiN diffusion barrier failure by the formation of Cu3Si investigated by electron microscopy and atom probe tomography

    Mühlbacher, M., Greczynski, G., Sartory, B., Mendez Martin, F., Schalk, N., Lu, J., Hultman, L. & Mitterer, C., 19 Feb 2016, In: Journal of Vacuum Science and Technology B, JVSTB. 34.2016, 2, p. 1-8 8 p., 022202.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Microstructural stability of a single-phase nanocrystalline CoCrFeMnNi high-entropy alloy

    Schuh, B., Hohenwarter, A., Maier-Kiener, V., Clemens, H., Völker, B., Mendez Martin, F. & George, E., 15 Feb 2016.

    Research output: Contribution to conference › Presentation › Research

  37. Published

    Microstrucural Investigations of a nanocrystalline CoCrNi alloy

    Schuh, B., Hohenwarter, A., Mendez Martin, F., Völker, B. & Maier-Kiener, V., 6 Feb 2016.

    Research output: Contribution to conference › Poster › Research

  38. Published

    3D Atom Probe Characterisation of Passive Layers on Stainless Steels

    Mori, G., Visser, A., Turk, C., Mendez Martin, F., Kapp, M., Fluch, R. & Leitner, H., 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  39. Published

    Die Rolle der Metallographie bei der Charakterisierung von Hochleistungswerkstoffe

    Mayer, S., Rashkova, B., Mendez Martin, F., Primig, S., Panzenböck, M. & Clemens, H., 2016, In: Jahresmagazin Materialographie, Metallographie : Ingenieurwissenschaften ... : im Fokus. 2016, p. 82-87 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Diffusion Studies in the TiN/Cu Bilayer System and Beyond

    Mühlbacher, M., Mendez Martin, F., Sartory, B., Greczynski, G., Lu, J., Schalk, N., Hultman, L. & Mitterer, C., 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  41. Published

    Erosion behavior of composite Al-Cr cathodes in cathodic arc plasmas in inert and reactive atmospheres

    Franz, R., Mendez Martin, F., Hawranek, G. & Polcik, P., 2016, In: Journal of vacuum science & technology / A (JVST). Vol. 34, No. 2, p. 1-8 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Influence of oxygen impurities on growth morphology, structure and mechanical properties of Ti–Al–N thin films

    Riedl, H., Munnik, F., Hutter, H., Mendez Martin, F., Kolozsvari, S., Bartosik, M., Mayrhofer, P. H., Koller, C. & Rachbauer, R., 2016, In: Thin solid films. 603, p. 39-49 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    SEM and FIB-SEM investigations on potential gas shales in the Dniepr-Donets Basin (Ukraine): Pore space evolution in organic matter during thermal maturation

    Misch, D., Mendez Martin, F., Hawranek, G., Onuk, P., Groß, D. & Sachsenhofer, R., 2016, In: IOP Conference Series: Materials Science and Engineering. 109, doi:10.1088/1757-899X/109/1/012010

    Research output: Contribution to journal › Article › Research › peer-review

  44. 2015
  45. Published

    EPMA, BIB-SEM and FIB-SEM Investigations on Gas Shales from the Dniepr Donets Basin (Ukraine): Evolution of Micro- and Nanoscale Porosity during Thermal Maturation

    Misch, D., Mendez Martin, F., Klaver, J., Groß, D., Hawranek, G., Schmatz, J. & Sachsenhofer, R., 21 Sept 2015.

    Research output: Contribution to conference › Abstract › peer-review

  46. E-pub ahead of print

    Cu diffusion in single-crystal and polycrystalline TiN barrier layers: A high-resolution experimental study supported by first-principles calculations

    Mühlbacher, M., Bochkarev, A. S., Mendez Martin, F., Sartory, B., Chitu, L., Popov, M., Puschnig, P., Spitaler, J., Ding, H., Schalk, N., Lu, J., Hultman, L. & Mitterer, C., 26 Aug 2015, (E-pub ahead of print) In: Journal of applied physics. 118.2015, 8, 085307.

    Research output: Contribution to journal › Article › Research › peer-review

  47. E-pub ahead of print

    Carbon distribution in multi-phase γ-TiAl based alloys and its influence on mechanical properties and phase formation

    Klein, T., Schachermayer, M., Mendez Martin, F., Schöberl, T., Rashkova, B., Clemens, H. & Mayer, S., 21 May 2015, (E-pub ahead of print) In: Acta materialia. 94.2015, 1 August, p. 205-213 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    MICRO- AND NANOSCALE INVESTIGATIONS ON GAS SHALES FROM THE DNIEPR DONETS BASIN (UKRAINE): IMPLICATIONS FOR SHALE GAS POTENTIAL

    Misch, D., Mendez Martin, F., Groß, D., Onuk, P., Sachsenhofer, R. & Hawranek, G., 7 May 2015.

    Research output: Contribution to conference › Poster › Research › peer-review

  49. Published

    MICRO- AND NANOSCALE INVESTIGATIONS ON GAS SHALES FROM THE DNIEPR DONETS BASIN (UKRAINE): IMPLICATIONS FOR SHALE GAS POTENTIAL

    Misch, D., Mendez Martin, F., Groß, D., Onuk, P., Sachsenhofer, R. & Hawranek, G., 6 May 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  50. Published

    Microstructural investigations of a nanocrystalline high-entropy alloy

    Schuh, B., Hohenwarter, A., Mendez Martin, F., Clemens, H. & Pippan, R., 8 Apr 2015, p. 319.

    Research output: Contribution to conference › Poster › Research › peer-review

  51. Published

    Atom probe study of ωo phase in a β phase containing TiAl alloy

    Klein, T., Schachermayer, M., Mendez Martin, F., Clemens, H. & Mayer, S., 2015.

    Research output: Contribution to conference › Poster › Research

  52. Published

    Copper diffusion into single-crystalline TiN studied by transmission electron microscopy and atom probe tomography

    Mühlbacher, M., Mendez Martin, F., Sartory, B., Schalk, N., Keckes, J., Lu, J., Hultman, L. & Mitterer, C., 2015, In: Thin solid films. 574, p. 103-109

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    Cross-sectional analysis of AlCr composite cathodes after erosion in cathodic arc plasma with inert and reactive gas atmosphere

    Franz, R., Mendez Martin, F., Hawranek, G. & Polcik, P., 2015.

    Research output: Contribution to conference › Poster › Research › peer-review

  54. Published

    Diffusion in the Cu/TiN thin film system studied by atom probe tomography correlated with transmission electron microscopy and first-principles calculations

    Mühlbacher, M., Mendez Martin, F., Lu, J., Schalk, N., Hultman, L. & Mitterer, C., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  55. Published

    Einfluss der chemischen Zusammensetzung auf die Lötrissigkeit allgemeiner Baustähle

    Schütz, P., Panzenböck, M. & Mendez Martin, F., 2015, p. 247.

    Research output: Contribution to conference › Poster › Research › peer-review

  56. Published

    Evaluation of TiN diffusion barrier layers with different microstructures by transmission electron microscopy and atom probe tomography

    Mühlbacher, M., Mendez Martin, F., Sartory, B., Chitu, L., Lu, J., Schalk, N., Keckes, J., Hultman, L. & Mitterer, C., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  57. Published

    Evolution of the ω-phase in a multi-phase TiAl alloy and its effect on hardness

    Rashkova, B., Klein, T., Schachermayer, M., Mendez Martin, F., Schöberl, T., Zhang, Z., Mayer, S. & Clemens, H., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  58. Published

    Functional thin films for display and microelectronics applications

    Mitterer, C., Jörg, T., Franz, R., Mühlbacher, M., Sartory, B., Mendez Martin, F. & Schalk, N., 2015, In: Berg- und hüttenmännische Monatshefte : BHM. 160, 5, p. 231-234

    Research output: Contribution to journal › Article › Research › peer-review

  59. Published

    Mechanical properties, microstructure and thermal stability of a nanocrystalline CoCrFeMnNi high-entropy alloy after severe plastic deformation

    Schuh, B., Mendez Martin, F., Völker, B., George, E. P., Clemens, H., Pippan, R. & Hohenwarter, A., 2015, In: Acta materialia. 96, p. 258-268

    Research output: Contribution to journal › Article › Research › peer-review

  60. Published

    Metallography - A Powerful Instrument for Material Characterisation, Material Development and Failure Analysis

    Panzenböck, M., Hawranek, G., Mendez Martin, F., Mayer, S., Pölzl, S., Schütz, P., Primig, S., Rashkova, B. & Clemens, H., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  61. Published

    Phase changes observed on AlCr composite cathodes after exposure to cathodic arc plasmas in N2 and O2 atmospheres

    Franz, R., Mendez Martin, F., Hawranek, G. & Polcik, P., 2015.

    Research output: Contribution to conference › Presentation › Research

  62. Published

    Phase decomposition of a nanocrystalline CoCrFeMnNi high-entropy alloy

    Schuh, B., Hohenwarter, A., Mendez Martin, F., Clemens, H., Völker, B., Pippan, R. & George, E. P., 2015.

    Research output: Contribution to conference › Poster › Research

  63. Published

    Phase decomposition of a nanocrystalline CoCrFeMnNi high-entropy alloy

    Schuh, B., Hohenwarter, A., Mendez Martin, F., Clemens, H., George, E. P., Völker, B. & Pippan, R., 2015.

    Research output: Contribution to conference › Presentation › Research

  64. Published

    The role of metallography in the development and characterization of high-performance materials

    Mayer, S., Hawranek, G., Mendez Martin, F., Panzenböck, M., Pölzl, S., Primig, S., Rashkova, B. & Clemens, H., 2015, In: Practical metallography = Praktische Metallographie. 52.2015, 2, p. 59-74 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  65. Published

    The use of atom probe tomography for the characterization and development of intermetallic γ-TiAl based alloys

    Klein, T., Schachermayer, M., Mendez Martin, F., Holec, D., Rashkova, B., Schöberl, T., Clemens, H. & Mayer, S., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  66. Published

    Versagen von feuerverzinkten Stahlbauteilen

    Panzenböck, M., Mendez Martin, F., Rashkova, B., Schütz, P. & Kaiser, R., 2015, Sonderbänder der praktischen Metallographie 47. p. 203-208

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  67. Published

    Versagen von feuerverzinkten Stahlbauteilen - Gefüge und Versagen von Werkstoffen

    Panzenböck, M., Mendez Martin, F., Rashkova, B., Schütz, P., Kaiser, R., Spiradek-Hahn, K. & Brabetz, M., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  68. 2014
  69. Published

    Advanced Steels

    Clemens, H., Primig, S., Mendez Martin, F., Babinsky, K., Hofer, C., Lang, D., Sackl, S. C., Turk, C. & Weißensteiner, I., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  70. Published

    Alloying element distribution within the constituent phases of a C-containing γ-TiAl based alloy studied by atom probe tomography

    Klein, T., Mendez Martin, F., Schachermayer, M., Schöberl, T., Rashkova, B., Clemens, H. & Mayer, S., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  71. Published

    Atom probe investigations in low carbon steel on Arvedi endless strip production line

    Mendez Martin, F. & Bragin, S., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  72. Published

    Cu diffusion into single-crystalline TiN studied by transmission electron microscopy and atom probe tomography

    Mühlbacher, M., Mendez Martin, F., Sartory, B., Schalk, N., Keckes, J., Lu, J., Hultman, L. & Mitterer, C., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  73. Published

    Die Rolle der Metallographie bei Entwicklung und Charakterisierung von Hochleistungswerkstoffen

    Mayer, S., Hawranek, G., Mendez Martin, F., Panzenböck, M., Pölzl, S., Primig, S., Rashkova, B. & Clemens, H., 2014, Sonderbände der Praktischen Metallographie 46. p. 3-12

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  74. Published

    Diffusion studies in epitaxial TiN/Cu layers on MgO(001) by high resolution TEM and APT

    Mühlbacher, M., Mendez Martin, F., Sartory, B., Schalk, N., Keckes, J., Lu, J., Hultman, L. & Mitterer, C., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  75. Published

    Distribution of alloying elements within the constituent phases of a C-containing gamma-TiAl based alloy studied by atom probe tomography: Mater. Res. Soc. Symp. Proc. Vol.1760 2014 Materials Research Society

    Klein, T., Mendez Martin, F., Schachermayer, M., Rashkova, B., Clemens, H. & Mayer, S., 2014

    Research output: Non-textual form › Web publication/site › Research

  76. Published

    High Performance Materials

    Clemens, H., Primig, S., Mendez Martin, F., Babinsky, K., Hofer, C., Lang, D., Sackl, S. C., Turk, C. & Weißensteiner, I., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  77. Published

    High-rate deposition of AlTiN and related coatings with dense morphology by central cylindrical direct current magnetron sputtering

    Jilek, Jr., M., Jilek,, M., Mendez Martin, F., Mayrhofer, P. H. & Veprek, S., 2014, In: Thin solid films. 556, p. 361-368

    Research output: Contribution to journal › Article › Research › peer-review

  78. Published

    Influence of microstructure on diffusion barrier properties of TiN investigated by TEM and APT

    Mühlbacher, M., Mendez Martin, F., Sartory, B., Lu, J., Schalk, N., Lars, H. & Mitterer, C., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  79. Published

    Oxygen impurity related hardening mechanisms of Ti-Al-N thin films

    Riedl, H., Koller, C., Rachbauer, R., Kolozsvari, S., Mendez Martin, F. & Mayrhofer, P. H., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  80. Published

    Phase and interstitial element characterization via atom probe tomography in a multi-phase TiAl based alloy

    Mendez Martin, F., Klein, T., Schachermayer, M., Clemens, H. & Mayer, S., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  81. 2013
  82. Published

    Atomistic insights into milling mechanisms in an fe-Y2O3 model alloy

    Ressel, G., Holec, D., Fian, A., Mendez Martin, F. & Leitner, H., 2013, In: Applied physics / A (Series A, Materials science & processing).

    Research output: Contribution to journal › Article › Research › peer-review

  83. Published

    Focused ion beam sample preparation of mechanically alloyed iron powders for Atom Probe Tomography

    Mendez Martin, F., Ressel, G. & Leitner, H., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  84. Published

    Interfacial and inter- diffusion studies of epitaxial TiN/Cu layers on MgO (001) - A comprehensive approach by high resolution TEM and APT

    Mühlbacher, M., Mendez Martin, F., Sartory, B., Keckes, J., Lu, J., Lars, H. & Mitterer, C., 2013.

    Research output: Contribution to conference › Presentation › Research › peer-review

View graph of relations

Latest Research Output

View more (74)