Daniel Kiener

1 - 100 out of 336Page size: 100

Research output

  1. 2025
  2. Published

    3D multi-site hydrogen evolution reaction catalysts on nanoimprinted surfaces, structured via multi-photon lithography derived masks

    Jelinek, A., Neumüller, D., Gammer, C., Eckert, J. & Kiener, D., Apr 2025, In: Materials and Design. 252, 113809.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Processing of Nanocrystalline Inconel 718—Graphite Composites by High-Pressure Torsion

    Kasalo, M., Suarez, S., Keckes, J. F., Kiener, D. & Bachmaier, A., Apr 2025, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 56, 6, p. 1461–1476

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Resolving the fundamentals of the J-integral concept by multi-method in situ nanoscale stress-strain mapping

    Meindlhumer, M., Alfreider, M., Sheshi, N., Hohenwarter, A., Todt, J., Rosenthal, M., Burghammer, M., Salvati, E., Keckes, J. & Kiener, D., 22 Feb 2025, In: Communications materials. 2025, 6, 15 p., 35.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Novel ambient-condition solid-state synthesis route of nanocrystalline TiN thin films via spark plasma ablation deposition

    Radovanović-Perić, F., Burtscher, M., Panžić, I., Kiener, D. & Mandić, V., Feb 2025, In: Ceramics International. 51, 5, p. 5576-5582 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Phase stability and enhanced mechanical properties of nanocrystalline PVD CrCu coatings

    Burtscher, M., Kainz, C., Dorner, P., Fellner, S., Terziyska, V., Alfreider, M. & Kiener, D., 8 Jan 2025, In: Journal of Materials Research and Technology. 35.2025, March-April, p. 369-378 10 p., 35.

    Research output: Contribution to journal › Article › Research › peer-review

  7. 2024
  8. Published

    Publisher Correction: Nanomechanical characterization (MRS Bulletin, (2023), 10.1557/s43577-023-00643-z)

    Kiener, D. & Misra, A., Dec 2024, In: MRS Bulletin. 49.2024, March, 1 p.

    Research output: Contribution to journal › Comment/debate › peer-review

  9. Published

    Assessing the fracture toughness in Tungsten-based nanocomposites: A micro-mechanical approach

    Schmuck, K. S., Burtscher, M., Alfreider, M. & Kiener, D., 6 Nov 2024, In: Materials and Design. 247.2024, November, 11 p., 113433.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Unraveling mudstone compaction at microscale: A combined approach of nanoindentation mapping and machine learning data analysis

    Shi, X., Misch, D., Skerbisch, L., Sachsenhofer, R. F., Žák, S., Cordill, M. & Kiener, D., Nov 2024, In: Marine and petroleum geology. 169.2024, November, 16 p., 107083.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Editorial for the Special Issue on the Occasion of Reinhard Pippan's 70th Birthday: Celebrating a Legacy of Innovation and Excellence in Material Science

    Kiener, D. & Hohenwarter, A., Oct 2024, In: Advanced Engineering Materials. 26.2024, 19, 4 p., 2401772.

    Research output: Contribution to journal › Editorial › peer-review

  12. Published

    Strain Field Around Individual Dislocations Controls Failure

    Gammer, C., Issa, I., Minor, A. M., Ritchie, R. O. & Kiener, D., 6 Sept 2024, In: Small Methods. 8.2024, 12, 7 p., 2400654.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Unraveling the orientation-dependent mechanics of dental enamel in the red-necked wallaby

    Wilmers, J., Wurmshuber, M., Gescher, C., Graupp, C. M., Kiener, D. & Bargmann, S., 1 Sept 2024, In: Acta biomaterialia. 185.2024, 1 September, p. 254-265 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Mapping the composite nature of clay matrix in mudstones: integrated micromechanics profiling by high-throughput nanoindentation and data analysis

    Shi, X., Misch, D., Žák, S., Cordill, M. & Kiener, D., 14 Aug 2024, In: Geomechanics and geophysics for geo-energy and geo-resources. 10.2024, 25 p., 139.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Automatic and time-resolved determination of fracture characteristics from in situ experiments

    Schmuck, K. S., Antenreiter, M., Alfreider, M. & Kiener, D., Jul 2024, In: Materials & design. 243.2024, July, 12 p., 113038.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Mechanical processing and thermal stability of the equiatomic high entropy alloy TiVZrNbHf under vacuum and hydrogen pressure

    Schweiger, L., Römer, F., Gizer, G., Burtscher, M., Kiener, D., Pistidda, C., Schökel, A., Spieckermann, F. & Eckert, J., 10 Jun 2024, In: Applied physics letters. 124.2024, 24, 241903.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Exploring Refinement Characteristics in FeTi–Cux Composites: A Study of Localization and Abrasion Constraints

    Schweiger, L., Spieckermann, F., Buchebner, N., Keckes, J. F., Kiener, D. & Eckert, J., 8 Jun 2024, In: Advanced Engineering Materials. 26.2024, 19, 12 p., 2400593.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Probing local adhesion: A miniaturized multi-photon lithography design demonstrated on silanized vs. untreated surfaces

    Jelinek, A., Rossegger, E., Schlögl, S., Kiener, D. & Alfreider, M., Jun 2024, In: Materials and Design. 242.2024, June, 13 p., 112994.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Microscopic fracture toughness of notched porous sintered Cu micro-cantilevers for power electronics packaging

    Hu, D., Du, L., Alfreider, M., Fan, J., Kiener, D. & Zhang, G., 7 Apr 2024, In: Materials Science and Engineering: A. 897.2024, April, 10 p., 146316.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Neural Network Supported Microscale In Situ Deformation Tracking: A Comparative Study of Testing Geometries

    Keckes, J. F., Jelinek, A., Kiener, D. & Alfreider, M., 23 Feb 2024, In: JOM. 76.2024, May, p. 2336-2351 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Micro-Mechanical Fracture Investigations on Grain Size Tailored Tungsten-Copper Nanocomposites

    Schmuck, K. S., Burtscher, M., Alfreider, M., Wurmshuber, M. & Kiener, D., 9 Jan 2024, In: JOM. 76.2024, 5, p. 2302-2314 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Hydrogen storage in nanoporous FeTi foams

    Schweiger, L., Spieckermann, F., Kostoglou, N., Stock, S., Wurster, S., Cengeri, P., Zehetbauer, M. J., Kiener, D. & Eckert, J., 2024.

    Research output: Contribution to conference › Poster › Research

  23. Published

    Investigating mechanical properties of silicon carbide coated carbon nanotube composite at elevated temperatures

    Mo, J., Schaffar, G. J. K., Du, L., Maier-Kiener, V., Kiener, D., Vollebregt, S. & Zhang, G., 2024, 2024 IEEE 37th International Conference on Micro Electro Mechanical Systems (MEMS). Vol. 37.2024. p. 626-629 4 p. (IEEE access).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. 2023
  25. Published

    Nanomechanical characterization

    Kiener, D. & Misra, A., 18 Dec 2023, In: MRS Bulletin. 49.2024, March, p. 214-223 10 p.

    Research output: Contribution to journal › Review article › peer-review

  26. Published

    Deformation and failure behavior of nanocrystalline WCu

    Burtscher, M., Alfreider, M., Kainz, C. & Kiener, D., 6 Nov 2023, In: Materials Science and Engineering A. 887.2023, 6 November, 9 p., 145760.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    From unlikely pairings to functional nanocomposites: FeTi–Cu as a model system

    Schweiger, L., Kiener, D., Burtscher, M., Schafler, E., Mori, G. K., Spieckermann, F. & Eckert, J., 17 Oct 2023, In: Materials today advances. 20.2023, December, 13 p., 100433.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Precipitation behavior of hexagonal carbides in a C containing intermetallic γ-TiAl based alloy

    Burtscher, M., Weißensteiner, I., Wartbichler, R., Kirchheimer, K., Bernhard, C., Kiener, D. & Clemens, H., 4 Oct 2023, In: Journal of alloys and compounds. 969.2023, 25 December, 7 p., 172400.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Nanoscale printed tunable specimen geometry enables high-throughput miniaturized fracture testing

    Jelinek, A., Žák, S., Cordill, M. J., Kiener, D. & Alfreider, M., Oct 2023, In: Materials and Design. 234.2023, October, 17 p., 112329.

    Research output: Contribution to journal › Article › Research › peer-review

  30. E-pub ahead of print

    Recent advances in nanomechanical and in situ testing techniques: Towards extreme conditions

    Kiener, D., Wurmshuber, M., Alfreider, M., Schaffar, G. J. K. & Maier-Kiener, V., 30 Sept 2023, (E-pub ahead of print) In: Current opinion in solid state & materials science. 27.2023, 6, 25 p., 101108.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Measurement of residual stresses in surrogate coated nuclear fuel particles using ring-core focussed ion beam digital image correlation

    Leide, A. J., Haynes, T. A., Tzelepi, N., Payne, J., Jordan, M., Knol, S., Vreeling, J. A., Davies, M., Goddard, D. T., Pfeifenberger, M. J., Alfreider, M., Kiener, D. & Liu, D., Sept 2023, In: Nuclear Materials and Energy. 36.2023, September, 101470.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Effect of wire-arc directed energy deposition on the microstructural formation and age-hardening response of the Mg-9Al-1Zn (AZ91) alloy

    Graf, G., Spörk-Erdely, P., Maawad, E., Burtscher, M., Kiener, D., Clemens, H. & Klein, T., 30 Jun 2023, In: Journal of magnesium and alloys. 11.2023, 6, p. 1944-1958 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Revealing dynamic-mechanical properties of precipitates in a nanostructured thin film using micromechanical spectroscopy

    Alfreider, M., Meindlhumer, M., Ziegelwanger, T., Daniel, R., Keckes, J. & Kiener, D., 25 Jun 2023, In: MRS Bulletin. 49.2024, 1, p. 49-58 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  34. E-pub ahead of print

    On the stability of Ti(Mn,Al)2 C14 Laves phase in an intermetallic Ti–42Al–5Mn alloy

    Graf, G., Seyffertitz, M., Spörk-Erdely, P., Clemens, H., Stark, A., Hatzenbichler, L., Holec, D., Burtscher, M., Kiener, D., Li, X. & Liu, K., 11 Jun 2023, (E-pub ahead of print) In: Intermetallics. 161.2023, October, 9 p., 107962.

    Research output: Contribution to journal › Article › Research › peer-review

  35. E-pub ahead of print

    Lower hardness than strength: The auxetic composite microstructure of limpet tooth

    Wurmshuber, M., Wilmers, J., Kim, J., Oh, S. H., Bargmann, S. & Kiener, D., 29 Apr 2023, (E-pub ahead of print) In: Acta biomaterialia. 166.2023, August, p. 447-453 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    High-Throughput Micromechanical Testing Enabled by Optimized Direct Laser Writing

    Jelinek, A., Žák, S., Alfreider, M. & Kiener, D., 3 Apr 2023, In: Advanced engineering materials. 25.2023, 7, 10 p., 2200288.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Strength determination for rough substrate-coating interfaces with three-dimensional defect structure

    Klünsner, T., Krobath, M., Konetschnik, R., Tritremmel, C., Maier-Kiener, V., Samardzic, D., Ecker, W., Czettl, C., Mitterer, C. & Kiener, D., Apr 2023, In: International journal of refractory metals & hard materials. 112.2023, April, 10 p., 106149.

    Research output: Contribution to journal › Article › Research › peer-review

  38. E-pub ahead of print

    Small-scale fracture mechanical investigations on grain boundary doped ultrafine-grained tungsten

    Wurmshuber, M., Alfreider, M., Wurster, S., Burtscher, M., Pippan, R. & Kiener, D., 28 Mar 2023, (E-pub ahead of print) In: Acta Materialia. 250.2023, 15 May, 12 p., 118878.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Novel Structural and Functional Material Properties Enabled by Nanocomposite Design

    Eckert, J. (Editor) & Kiener, D. (Editor), Mar 2023, Multidisciplinary Digital Publishing Institute (MDPI).

    Research output: Book/Report › Book › Research

  40. Published

    Special Issue “Novel Structural and Functional Material Properties Enabled by Nanocomposite Design”

    Eckert, J. & Kiener, D., 1 Feb 2023, In: Nanomaterials. 13.2023, 3, 3 p., 586.

    Research output: Contribution to journal › Editorial › peer-review

  41. Published

    Enhancing mechanical properties of ultrafine-grained tungsten for fusion applications

    Wurmshuber, M., Doppermann, S., Wurster, S., Jakob, S., Balooch, M., Alfreider, M., Schmuck, K. S., Bodlos, R., Romaner, L., Hosemann, P., Clemens, H., Maier-Kiener, V. & Kiener, D., Feb 2023, In: International journal of refractory metals & hard materials. 111.2023, February, 7 p., 106125.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Novel Approach for Assessing Cyclic Thermomechanical Behavior of Multilayered Structures

    Seligmann, B., Alfreider, M., Wurmshuber, M. & Kiener, D., Feb 2023, In: Advanced engineering materials. 25.2023, 3, 10 p., 2201209.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Data-mining of in-situ TEM experiments: Towards understanding nanoscale fracture

    Steinberger, D., Issa, I., Strobl, R., Imrich, P. J., Kiener, D. & Sandfeld, S., 5 Jan 2023, In: Computational materials science. 216.2023, 5 January, 9 p., 111830.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    How tight are top seals? Insights from a comprehensive characterization workflow

    Shi, X., Misch, D., Cordill, M., Zak, S., Siedl, W., Sachsenhofer, R. & Kiener, D., 2023, 84th EAGE Annual Conference and Exhibition. p. 232-236 5 p. (84th EAGE Annual Conference and Exhibition; vol. 1).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  45. 2022
  46. Published

    Advances in multi-scale mechanical characterization

    Mangalampalli, K., Ghosh, P., Volpi, F., Kiener, D. & Useinov, A., 8 Dec 2022, In: Journal of applied physics. 132:2022, 22, 4 p., 220401.

    Research output: Contribution to journal › Editorial › peer-review

  47. Published

    Limpet teeth microstructure unites auxeticity with extreme strength and high stiffness

    Oh, S. H., Kim, J.-K., Liu, Y., Wurmshuber, M., Peng, X.-L., Seo, J., Jeong, J., Wang, Z., Wilmers, J., Soyarslan, C., Kim, J., Kittiwirayanon, B., Jeong, J., Kim, H.-J., Huh, Y. H., Kiener, D., Bargmann, S. & Gao, H., 2 Dec 2022, In: Science Advances. 8.2022, 48, 10 p., eadd4644.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Publisher Correction: In situ fracture observations of distinct interface types within a fully lamellar intermetallic TiAl alloy (Journal of Materials Research, (2021), 36, 12, (2465-2478), 10.1557/s43578-020-00088-z)

    Burtscher, M., Alfreider, M., Schmuck, K. S., Clemens, H., Mayer, S. & Kiener, D., 14 Nov 2022, In: Journal of Materials Research. 37.2021, p. 3855 1 p.

    Research output: Contribution to journal › Comment/debate › peer-review

  49. Published

    Mechanical performance of doped W–Cu nanocomposites

    Wurmshuber, M., Burtscher, M., Doppermann, S., Bodlos, R., Scheiber, D., Romaner, L. & Kiener, D., 1 Nov 2022, In: Materials Science and Engineering A. 857.2022, 1 November, 12 p., 144102.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Hydrogen Storage in Porous Metalhydrid - Polymer Hybride Materials

    Schweiger, L., Spieckermann, F., Kiener, D., Mori, G. K. & Eckert, J., 27 Sept 2022.

    Research output: Contribution to conference › Poster › Research

  51. Published

    Interface-related deformation phenomena in metallic glass/high entropy nanolaminates

    Xu, Q., Şopu, D., Yuan, X., Kiener, D. & Eckert, J., 15 Sept 2022, In: Acta Materialia. 237.2022, 15 September, 9 p., 118191.

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Crack length estimations for small-scale fracture experiments via image processing techniques

    Schmuck, K., Alfreider, M. & Kiener, D., 14 Sept 2022, In: Journal of Materials Research. 37.2022, 17, p. 2848-2861 14 p., 17.

    Research output: Contribution to journal › Article › Research › peer-review

  53. E-pub ahead of print

    Interface mediated deformation and fracture of an elastic–plastic bimaterial system resolved by in situ transmission scanning electron microscopy

    Alfreider, M., Balbus, G., Wang, F., Zechner, J., Gianola, D. S. & Kiener, D., 14 Sept 2022, (E-pub ahead of print) In: Materials and Design. 223.2022, November, 17 p., 111136.

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    100 years after Griffith: From brittle bulk fracture to failure in 2D materials

    Kiener, D. & Han, S. M., Aug 2022, In: MRS Bulletin. 47.2022, August, p. 792-799 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  55. Published

    In situ micromechanical analysis of a nano-crystalline W-Cu composite

    Burtscher, M., Alfreider, M., Kainz, C., Schmuck, K. S. & Kiener, D., Aug 2022, In: Materials and Design. 220.2022, August, 9 p., 110848.

    Research output: Contribution to journal › Article › Research › peer-review

  56. Published

    FIB and Wedge Polishing Sample Preparation for TEM Analysis of Sol-Gel Derived Perovskite Thin Films

    Sanz-Mateo, J., Deluca, M., Sartory, B., Benes, F. & Kiener, D., 20 Jul 2022, In: Ceramics. 5.2022, 3, p. 288-300 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  57. Published

    Hydrogen Storage in Porous Metalhydrid - Polymer Hybride Materials

    Schweiger, L., Spieckermann, F., Kiener, D., Mori, G. K. & Eckert, J., 19 Jul 2022.

    Research output: Contribution to conference › Poster › Research

  58. Published

    The influence of chemistry on the interface toughness in a WTi-Cu system

    Alfreider, M., Bodlos, R., Romaner, L. & Kiener, D., 15 May 2022, In: Acta Materialia. 230.2022, 15 May, 13 p., 117813.

    Research output: Contribution to journal › Article › Research › peer-review

  59. Published

    Helium-induced swelling and mechanical property degradation in ultrafine-grained W and W-Cu nanocomposites for fusion applications

    Wurmshuber, M., Balooch, M., Huang, X., Hosemann, P. & Kiener, D., May 2022, In: Scripta materialia. 213.2022, May, 5 p., 114641.

    Research output: Contribution to journal › Article › Research › peer-review

  60. Published

    Wasserstoffspeicherung in porösen Metallhydrid Polymer Hybridmaterialien

    Schweiger, L., Spieckermann, F., Kiener, D., Mori, G. K. & Eckert, J., 20 Apr 2022.

    Research output: Contribution to conference › Poster › Research

  61. E-pub ahead of print

    Tuning mechanical properties of ultrafine-grained tungsten by manipulating grain boundary chemistry

    Wurmshuber, M., Jakob, S., Doppermann, S., Wurster, S., Bodlos, R., Romaner, L., Maier-Kiener, V. & Kiener, D., 19 Apr 2022, (E-pub ahead of print) In: Acta materialia. 232.2022, 15 June, 13 p., 117939.

    Research output: Contribution to journal › Article › Research › peer-review

  62. Published

    Oxidation resistance of cathodic arc evaporated Cr0.74Ta0.26N coatings

    Kainz, C., Saringer, C., Burtscher, M., Tkadletz, M., Stark, A., Schell, N., Pohler, M., Czettl, C., Kiener, D. & Schalk, N., 1 Apr 2022, In: Scripta materialia. 211.2022, 1 April, 5 p., 114492.

    Research output: Contribution to journal › Article › Research › peer-review

  63. Published

    Prospects of enhancing the understanding of material-hydrogen interaction by novel in-situ and in-operando methods

    Massone, A. & Kiener, D., 26 Feb 2022, In: International Journal of Hydrogen Energy . 47.2022, 17, p. 10097-10111 15 p.

    Research output: Contribution to journal › Review article › peer-review

  64. Published

    Effect of crystal orientation on the hardness and strength of piezoelectric LiNbO3 substrates for microelectronic applications

    Gruber, M., Leitner, A., Kiener, D., Supancic, P. & Bermejo, R., 2022, In: Materials and Design. 213, 110306.

    Research output: Contribution to journal › Article › Research › peer-review

  65. Published

    Effect of the wire and arc additive manufacturing process on microstructure and aging behavior of a magnesium alloy studied by HEXRD

    Graf, G., Klein, T., Maawad, E., Burtscher, M., Kiener, D., Clemens, H. & Spörk-Erdely, P., 2022.

    Research output: Contribution to conference › Poster › Research

  66. Published

    Oxidation resistance of arc-evaporated Cr0.74Ta0.26N coatings

    Kainz, C., Saringer, C., Burtscher, M., Tkadletz, M., Stark, A., Schell, N., Pohler, M., Czettl, C., Kiener, D. & Schalk, N., 2022.

    Research output: Contribution to conference › Poster › Research

  67. 2021
  68. Published

    A Perspective to Control Laser-Induced Periodic Surface Structure Formation at Glancing-Incident Femtosecond Laser-Processed Surfaces

    Jelinek, A., Pfeifenberger, M. J., Pippan, R. & Kiener, D., Dec 2021, In: JOM. 73, 12, p. 4248–4257 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  69. Published

    High-Temperature Nanoindentation of an Advanced Nano-Crystalline W/Cu Composite

    Burtscher, M., Zhao, M., Kappacher, J., Leitner, A., Wurmshuber, M., Pfeifenberger, M. J., Maier-Kiener, V. & Kiener, D., 3 Nov 2021, In: Nanomaterials. 11, 11, 14 p., 2951.

    Research output: Contribution to journal › Article › Research › peer-review

  70. Published

    High-speed nanoindentation mapping of organic matter-rich rocks: A critical evaluation by correlative imaging and machine learning data analysis

    Vranjes-Wessely, S., Misch, D., Kiener, D., Cordill, M. J., Frese, N., Beyer, A., Horsfield, B., Wang, C. & Sachsenhofer, R. F., 1 Nov 2021, In: International journal of coal geology. 247.2021, 1 November, 19 p., 103847.

    Research output: Contribution to journal › Article › Research › peer-review

  71. Published

    In-situ fracture determination of a W-Cu nanocomposite

    Burtscher, M., Schmuck, K. S., Wurmshuber, M., Alfreider, M. & Kiener, D., 14 Sept 2021.

    Research output: Contribution to conference › Poster › Research

  72. Published

    In-situ TEM investigation of toughening in Silicon at small scales

    Issa, I., Gammer, C., Kolitsch, S., Hohenwarter, A., Imrich, P. J., Pippan, R. & Kiener, D., Sept 2021, In: Materials today. 48, 48, p. 29-37 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  73. Published

    Disordered interfaces enable high temperature thermal stability and strength in a nanocrystalline aluminum alloy

    Balbus, G. H., Kappacher, J., Sprouster, D. J., Wang, F., Shin, J., Eggeler, Y. M., Rupert, T. J., Trelewicz, J. R., Kiener, D., Maier-Kiener, V. & Gianola, D. S., 15 Aug 2021, In: Acta Materialia. 215.2021, 15 August, 14 p., 116973.

    Research output: Contribution to journal › Article › Research › peer-review

  74. Published

    Extracting information from noisy data: strain mapping during dynamic in situ SEM experiments

    Alfreider, M., Meindlhumer, M., Maier-Kiener, V., Hohenwarter, A. & Kiener, D., 14 Jun 2021, In: Journal of materials research (JMR). 36.2021, 11, p. 2291-2304 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  75. Published

    HRTEM analysis of nano-crystalline BaTiO3 thin films made via a sol-gel route

    Sanz Mateo, J., Benes, F., Kiener, D. & Deluca, M., 2 Jun 2021.

    Research output: Contribution to conference › Poster › Research

  76. Published

    Strength ranking for interfaces between a TiN hard coating and microstructural constituents of high speed steel determined by micromechanical testing

    Gsellmann, M., Klünsner, T., Mitterer, C., Krobath, M., Wurmshuber, M., Leitner, H., Ecker, W., Marsoner, S., Maier-Kiener, V., Kiener, D. & Ressel, G., 31 Mar 2021, In: Materials and Design. 204.2021, June, 11 p., 109690.

    Research output: Contribution to journal › Article › Research › peer-review

  77. Published

    Zr addition-dependent twin morphology evolution and strengthening response in nanostructured Al thin films

    Li, G. Y., Wang, Y. Q., Zuo, J. D., Zhang, M., He, C., Feng, X., Luan, J. H., Lu, Y., Zhang, J. Y., Cazottes, S., Kiener, D., Liu, G. & Sun, J., 19 Mar 2021, In: Materialia. 2021, 16, 1 p., 101076.

    Research output: Contribution to journal › Article › Research › peer-review

  78. Published

    Correction to: Controlling the high temperature deformation behavior and thermal stability of ultra‑fine‑grained W by re alloying. Correction to: Journal of Materials Research https://doi.org/10.1557/s43578-020-00026-z

    Kappacher, J., Renk, O., Kiener, D., Clemens, H. & Maier-Kiener, V., Feb 2021, In: Journal of Materials Research. 36, 3, p. 784-784 1 p.

    Research output: Contribution to journal › Article › Research › peer-review

  79. Published

    Controlling the high temperature deformation behavior and thermal stability of ultra-fine-grained W by re alloying

    Kappacher, J., Renk, O., Kiener, D., Clemens, H. & Maier-Kiener, V., 25 Jan 2021, In: Journal of Materials Research. 2021, 12, p. 2408-2419 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  80. Published

    How the interface type manipulates the thermochemanical response of nanostructured metals: A case study on nickel: A case study on nickel

    Renk, O., Maier-Kiener, V., Motz, C., Eckert, J., Kiener, D. & Pippan, R., 24 Jan 2021, In: Materialia. 2021, 15, 13 p., 101020.

    Research output: Contribution to journal › Article › Research › peer-review

  81. Published

    Prospects of Using Small Scale Testing to Examine Different Deformation Mechanisms in Nanoscale Single Crystals—A Case Study in Mg

    Kiener, D., Jeong, J., Alfreider, M., Konetschnik, R. & Oh, S. H., 14 Jan 2021, In: Crystals. 11.2021, 1, 15 p., 61.

    Research output: Contribution to journal › Article › Research › peer-review

  82. Published

    The effect of grain size on bubble formation and evolution in helium-irradiated Cu-Fe-Ag

    Wurmshuber, M., Frazer, D., Balooch, M., Issa, I., Bachmaier, A., Hosemann, P. & Kiener, D., Jan 2021, In: Materials characterization. 171, 171, 110822.

    Research output: Contribution to journal › Article › Research › peer-review

  83. Published

    How grain boundary characteristics influence plasticity close to and above the critical temperature of ultra-fine grained bcc Ta2.5W

    Kappacher, J., Renk, O., Kiener, D., Clemens, H. & Maier-Kiener, V., 2021, In: Acta materialia. 2021, 216, 11 p., 117110.

    Research output: Contribution to journal › Article › Research › peer-review

  84. 2020
  85. Published

    Initiation of fatigue damage in ultrafine grained metal films

    Glushko, O. & Kiener, D., 27 Dec 2020, In: Acta Materialia. 2021, 206, 10 p., 116599.

    Research output: Contribution to journal › Article › Research › peer-review

  86. Published

    In situ fracture observations of distinct interface types within a fully lamellar intermetallic TiAl alloy

    Burtscher, M., Alfreider, M., Schmuck, K., Clemens, H., Mayer, S. & Kiener, D., 11 Nov 2020, In: Journal of Materials Research. 2021, 12, p. 2465-2478 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  87. Published

    Addressing Fracture Properties of Individual Constituents Within a Cu-WTi-SiOx-Si Multilayer

    Alfreider, M., Zechner, J. & Kiener, D., 10 Nov 2020, In: JOM. 72.2020, 12, p. 4551-4558 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  88. Published

    Addressing H-Material Interaction in Fast Diffusion Materials—A Feasibility Study on a Complex Phase Steel

    Massone, A., Manhard, A., Drexler, A., Posch, C., Ecker, W., Maier-Kiener, V. & Kiener, D., 2 Oct 2020, In: Materials. 13.2020, 20, p. 1-20 20 p., 4677.

    Research output: Contribution to journal › Article › Research › peer-review

  89. E-pub ahead of print

    Multi-method characterization approach to facilitate a strategy to design mechanical and electrical properties of sintered copper

    Wijaya, A., Eichinger, B., Chamasemani, F. F., Sartory, B., Hammer, R., Maier-Kiener, V., Kiener, D., Mischitz, M. & Brunner, R., 28 Sept 2020, (E-pub ahead of print) In: Materials and Design. 2021, 197, 11 p., 109188.

    Research output: Contribution to journal › Article › Research › peer-review

  90. Published

    Open-cell tungsten nanofoams: Scaling behavior and structural disorder dependence of Young's modulus and flow strength

    Zhao, M., Schlueter, K., Wurmshuber, M., Reitgruber, M. & Kiener, D., 26 Sept 2020, In: Materials and Design. 2021, 197, 12 p., 109187.

    Research output: Contribution to journal › Article › Research › peer-review

  91. Published

    Nanoindentation of gas shales – analytical potential and limitations

    Vranjes-Wessely, S., Misch, D., Cordill, M. J., Kiener, D., Horsfield, B., Wang, C. & Sachsenhofer, R. F., Sept 2020.

    Research output: Contribution to conference › Abstract › peer-review

  92. Published

    Correlation between fracture characteristics and valence electron concentration of sputtered Hf-C-N based thin films

    Glechner, T., Lang, S., Hahn, R., Alfreider, M., Moraes, V., Primetzhofer, D., Ramm, J., Kolozsvári, S., Kiener, D. & Riedl, H., 19 Jul 2020, In: Surface and Coatings Technology. 399.2020, 15 October, 8 p., 126212.

    Research output: Contribution to journal › Article › Research › peer-review

  93. Published

    An analytical solution for the correct determination of crack lengths via cantilever stiffness

    Alfreider, M., Kolitsch, S., Wurster, S. & Kiener, D., 27 Jun 2020, In: Materials and Design. 194.2020, September, 3 p., 108914.

    Research output: Contribution to journal › Article › Research › peer-review

  94. Published

    Open-cell tungsten nanofoams: Chloride ion induced structure modification and mechanical behavior

    Zhao, M., Pfeifenberger, M. J. & Kiener, D., 1 Jun 2020, In: Results in Physics. 17.2020, June, 7 p., 103062.

    Research output: Contribution to journal › Article › Research › peer-review

  95. Published

    In-situ observation of the initiation of plasticity by nucleation of prismatic dislocation loops

    Lee, S., Vaid, A., Im, J., Kim, B., Prakash, A., Guénolé, J., Kiener, D., Bitzek, E. & Oh, S. H., 12 May 2020, In: Nature Communications. 11.2020, 1, 11 p., 2367.

    Research output: Contribution to journal › Article › Research › peer-review

  96. Published

    Experimental and Numerical Investigation of the Deformation and Fracture Mode of Microcantilever Beams Made of Cr(Re)/Al2O3 Metal-Matrix Composite

    Weglewski, W., Pitchai, P., Bochenek, K., Bolzon, G., Konetschnik, R., Sartory, B., Ebner, R., Kiener, D. & Basista, M., May 2020, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 51.2020, May, p. 2377-2390 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  97. E-pub ahead of print

    Nanoscale pore structure of Carboniferous coals from the Ukrainian Donets Basin: A combined HRTEM and gas sorption study

    Vranjes-Wessely, S., Misch, D., Issa, I., Kiener, D., Fink, R., Seemann, T., Liu, B., Rantitsch, G. & Sachsenhofer, R. F., 13 Apr 2020, (E-pub ahead of print) In: International journal of coal geology. 224.2020, 1 May, 14 p., 103484.

    Research output: Contribution to journal › Article › Research › peer-review

  98. E-pub ahead of print

    An SEM compatible plasma cell for in situ studies of hydrogen-material interaction

    Massone, A., Manhard, A., Jacob, W., Drexler, A., Ecker, W., Hohenwarter, A., Wurster, S. & Kiener, D., 10 Apr 2020, (E-pub ahead of print) In: Review of scientific instruments. 91.2020, 4, 043705.

    Research output: Contribution to journal › Article › Research › peer-review

  99. Published

    Thermally activated deformation mechanisms and solid solution softening in W-Re alloys investigated via high temperature nanoindentation

    Kappacher, J., Leitner, A., Kiener, D., Clemens, H. & Maier-Kiener, V., 1 Apr 2020, In: Materials and Design. 189.2020, April, 6 p., 108499.

    Research output: Contribution to journal › Article › Research › peer-review

  100. Published

    Achieving work hardening by forming boundaries on the nanoscale in a Ti-based metallic glass matrix composite

    Fan, J., Rao, W., Qiao, J., Liaw, P. K., Şopu, D., Kiener, D., Eckert, J., Kang, G. & Wu, Y., 19 Mar 2020, In: Journal of Materials Science and Technology. 50.2020, August, p. 192-203 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  101. Published

    Fracture behavior of a tough bulk metallic glass at micrometer dimensions

    Jelinek, A. & Kiener, D., 23 Feb 2020.

    Research output: Contribution to conference › Poster › Research

  102. Published

    Probing defect relaxation in ultra-fine grained Ta using micromechanical spectroscopy

    Alfreider, M., Issa, I., Renk, O. & Kiener, D., 15 Feb 2020, In: Acta Materialia. 185.2020, 15 February, p. 309-319 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  103. Published

    Intrinsic toughness of the bulk-metallic glass Vitreloy 105 measured using micro-cantilever beams

    Sorensen, D., Hintsala, E., Stevick, J., Pischlar, J., Li, B., Kiener, D., Myers, J. C., Jin, H., Liu, J., Stauffer, D., Ramirez, A. J. & Ritchie, R. O., 15 Jan 2020, In: Acta Materialia. 183.2020, 15 January, p. 242-248 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  104. Published

    Tailoring ultra-strong nanocrystalline tungsten nanofoams by reverse phase dissolution

    Zhao, M., Issa, I., Pfeifenberger, M. J., Wurmshuber, M. & Kiener, D., 1 Jan 2020, In: Acta Materialia. 182.2020, 1 January, p. 215-225 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  105. 2019
  106. E-pub ahead of print

    Erratum: Fracture properties of ultrafine grain chromium correlated to single dislocation processes at room temperature—ADDENDUM

    Issa, I., Hohenwarter, A., Fritz, R. & Kiener, D., 1 Dec 2019, (E-pub ahead of print) In: Journal of Materials Research. 34.2019, 24, p. 4085 1 p.

    Research output: Contribution to journal › Book/Film/Article review › Research › peer-review

  107. Published

    Pore-structural evolution of coals: Insights from high-resolution transmission electron microscopy and gas sorption

    Vranjes-Wessely, S., Misch, D., Issa, I., Kiener, D., Fink, R., Liu, B., Seemann, T., Rantitsch, G., Groß, D. & Sachsenhofer, R. F., Nov 2019.

    Research output: Contribution to conference › Abstract › peer-review

Previous 1 2 3 4 Next
View graph of relations

Latest Research Output

View more (336)