From unlikely pairings to functional nanocomposites: FeTi–Cu as a model system

Research output: Contribution to journalArticleResearchpeer-review

External Organisational units

  • Universität Wien
  • Erich Schmid Institute of Materials Science

Abstract

In order to develop materials for energy storage, a bulk nanocomposite with a composition of FeTi-25 vol% Cu was prepared by high-pressure torsion, with FeTi as functional phase for hydrogen storage and Cu as ductile phase to improve the processability. Despite the use of such a highly ductile auxiliary phase, the processability remained challenging due to strain localization in the softer Cu. This behavior is most pronounced at room temperature, and no nanocomposites were formed. At elevated temperatures, the strong strain rate sensitivity of the flow stress of the nanocrystalline Cu facilitates the formation of a FeTi–Cu nanocomposite due to a self-reinforcing process. Nevertheless, fragmentation of FeTi is limited because the resulting massive strain hardening prevents controlled processing at temperatures <250 °C, and Cu-rich shear bands develop at temperatures >250 °C. Satisfactory microstructural homogeneity is only achieved at the highest deformation temperatures of 550 °C. Overall, this study highlights that for unlikely material pairings, as often required in the pursuit of superior functional materials, the mechanical behavior of the phases involved and their interplay remains critical and must be thoroughly investigated when aiming for controlled structural homogeneity of bulk nanomaterials.

Details

Original languageEnglish
Article number100433
Number of pages13
JournalMaterials today advances
Volume2023
Issue number20
DOIs
Publication statusE-pub ahead of print - 17 Oct 2023