Department Materials Science

Organisational unit: Departments and Institutes

401 - 500 out of 5,456Page size: 100

Research output

  1. 2023
  2. Published

    Hochfeste metallpulver- und schweißpulvergefüllte Fülldrähte mit einer Streckgrenze über 690 Mpa - Ein Überblick

    Pahr, H. & Schrittwieser, D., 2023, In: Schweiß- & Prüftechnik. 2023

    Research output: Contribution to journal › Article › Research

  3. Published

    How tight are top seals? Insights from a comprehensive characterization workflow

    Shi, X., Misch, D., Cordill, M., Zak, S., Siedl, W., Sachsenhofer, R. & Kiener, D., 2023, 84th EAGE Annual Conference and Exhibition. p. 232-236 5 p. (84th EAGE Annual Conference and Exhibition; vol. 1).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  4. Published

    Hyperbaric Welding and Wire Arc Additive Manufacturing for Downhole Applications in the Oil and Gas Industry

    Escobar, S. M. L., Walzl, A., Ravi, K., Prohaska, M., Stockinger, M., Richardson, I. M., Fateh, N. & Hönig, S., 2023, Society of Petroleum Engineers - SPE/IATMI Asia Pacific Oil and Gas Conference and Exhibition, APOG 2023. Society of Petroleum Engineers , (Society of Petroleum Engineers - SPE/IATMI Asia Pacific Oil and Gas Conference and Exhibition, APOG 2023).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  5. Published

    Impactverhalten und Schadenstoleranz ausgewählter g-TiAl Legierungen

    Lintner, A., 2023

    Research output: Thesis › Doctoral Thesis

  6. Published

    Improving the mechanical properties of metallic glasses through structure and stress engineering: A molecular dynamics simulations study

    Yuan, X., 2023

    Research output: Thesis › Doctoral Thesis

  7. Published

    Influence of Temperature and Microstructure on the Magnetic Properties of Induction Heat Treated Steels

    Jaszfi, V., 2023

    Research output: Thesis › Doctoral Thesis

  8. Published

    Influence of vacancies on the N K-edge ELNES response of fcc Tantalum nitrides: Ab initio study

    Vukusic, A., 2023

    Research output: Thesis › Master's Thesis

  9. Published

    In-Situ HT-EBSD Measurements and Calibration of Multi-class Model for Grain Growth and δ-phase Dissolution Kinetics of Alloy 718

    Raninger, P., Gruber, C., Costin, W., Stanojevic, A., Kozeschnik, E. & Stockinger, M., 2023, Proceedings of the 10th International Symposium on Superalloy 718 and Derivatives, 2023. Ott, E. A., Andersson, J., Sudbrack, C., Bi, Z., Bockenstedt, K., Dempster, I., Fahrmann, M., Jablonski, P., Kirka, M., Liu, X., Nagahama, D., Smith, T., Stockinger, M. & Wessman, A. (eds.). p. 93-106 14 p. (Minerals, Metals and Materials Series).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. Published

    In-situ thermo-mechanical fatigue of copper metallizations

    Zernatto, G. N., 2023

    Research output: Thesis › Master's Thesis

  11. Published

    Interatomic potentials with ab-initio accuracy for defect and growth simulations in SiC

    Halkali, C., Rajabzadeh, Z. & Romaner, L., 2023.

    Research output: Contribution to conference › Poster › Research › peer-review

  12. Published

    Intercritical annealing of a PH 13-8 Mo maraging steel

    Rosenauer, A., Brandl, D., Ressel, G., Stadler, M., Stockinger, M. & Schnitzer, R., 2023, 28th IFHTSE 2023 Congress. (28th IFHTSE 2023 Congress).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  13. Published

    Interface adhesion measurement of industrially processed layers on polyimide

    Gutnik, D., 2023

    Research output: Thesis › Master's Thesis

  14. Published

    Interkritisches Glühen eines PH 13-8 Mo Maraging-Stahles

    Teusl, S., 2023

    Research output: Thesis › Master's Thesis

  15. Published

    Interplay between carbon structures and their surface functionalization for improved hydrogen storage

    Leiner, T., 2023.

    Research output: Contribution to conference › Poster › Research

  16. Published

    Klebeverbindung von Katalysatoren

    Wegscheider, S., 2023

    Research output: Thesis › Master's Thesis

  17. Published

    Local Assessment of Mechanical Properties in Forged Alloy 718 Components Based on the Simulation of the Microstructure Evolution During Production

    Gruber, C., Raninger, P., Stanojevic, A., Godor, F., Gänser, H. P., Marsoner, S. & Stockinger, M., 2023, Proceedings of the 10th International Symposium on Superalloy 718 and Derivatives, 2023. Ott, E. A., Andersson, J., Sudbrack, C., Bi, Z., Bockenstedt, K., Dempster, I., Fahrmann, M., Jablonski, P., Kirka, M., Liu, X., Nagahama, D., Smith, T., Stockinger, M. & Wessman, A. (eds.). p. 49-63 15 p. (Minerals, Metals and Materials Series).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  18. Published

    Low-temperature fabrication of ceramics by the cold sintering process

    Jabr, A., Bermejo Moratinos, R., Guillon, O. & Randall, C. A., 2023, In: Ceramic forum international (CFI). 100, 4, p. E2-E5

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Mechanical Characterization of Zinc Oxide produced by an optimized Cold Sintering Process

    Ribul, E., 2023

    Research output: Thesis › Master's Thesis

  20. Published

    Mechanical Properties of Al¿O¿ Coatings for Cutting Tools Deposited by Chemical Vapor Deposition

    Konstantiniuk, F., 2023

    Research output: Thesis › Doctoral Thesis

  21. Published

    Mechanical properties of nanoporous carbons for hydrogen storage applications

    Zeiler, S., Straßburg, M., Kostoglou, N., Maier-Kiener, V. & Mitterer, C., 2023.

    Research output: Contribution to conference › Poster › Research

  22. Published

    Mechanical response of textured alumina-based ceramics after Hertzian contact damage

    Stücklberger, F., 2023

    Research output: Thesis › Master's Thesis

  23. Published

    Micro-scale fracture toughness of textured alumina ceramics

    Schlacher, J., Csanádi, T., Vojtko, M., Papšík, R. & Bermejo Moratinos, R., 2023, In: Journal of the European Ceramic Society. 43, 7

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Microstructural characterization and mechanical properties of nanocomposite AlCrSiN thin films

    Kutlesa, K., 2023

    Research output: Thesis › Master's Thesis

  25. Published

    Microstructural characterization and mechanical properties of nanocomposite AlCrSiN thin films

    Kutlesa, K., Meindlhumer, M. & Keckes, J., 2023.

    Research output: Contribution to conference › Poster › Research

  26. Published

    Microstructure Variation of a Secondary Hardening Tool Steel through Heat Treatments

    Nistelberger, D., 2023

    Research output: Thesis › Master's Thesis

  27. Published

    Mikrostrukturelle Charakterisierung und Untersuchung des Hochtemperatur-Umformverhaltens einer mit Bor modifizierten (α+β)-Titanlegierung

    Taucher, L., 2023

    Research output: Thesis › Master's Thesis

  28. Published

    Modification of the Cu/W interface cohesion by segregation

    Bodlos, R., Scheiber, D., Spitaler, J. & Romaner, L., 2023, In: Metals : open access journal . 13.2023, 2, 16 p., 346.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Novel Approach for Assessing Cyclic Thermomechanical Behavior of Multilayered Structures

    Seligmann, B., Alfreider, M., Wurmshuber, M. & Kiener, D., 2023, In: Advanced engineering materials. 2023, 3, 10 p., 2201209.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Accepted/In press

    Operando Spatial and Temporal Tracking of Axial Stresses and Interfaces in Solid-state Batteries

    Mičky, S., Šimon, E., Todt, J., Végsö, K., Nádaždy, P., Krížik, P., Majková, E., Keckes, J., Li, J. & Siffalovic, P., 2023, (Accepted/In press) In: Small.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Physics-informed neural network for predicting Gibbs free energy

    Vincely, C., Sakic, A., Dave, V., Povoden-Karadeniz, E., Rückert, E. & Holec, D., 2023.

    Research output: Contribution to conference › Poster › Research

  32. Published

    Polycrystal diffraction elastic constants of advanced γ-TiAl based materials

    Obersteiner, D. & Spörk-Erdely, P., 2023.

    Research output: Contribution to conference › Poster › Research › peer-review

  33. Published

    Precipitate evolution in an iron-based superalloy

    Jelinek, A., Renk, O., Juarez Perez, L., Platl, J. & Schnitzer, R., 2023.

    Research output: Contribution to conference › Poster › Research

  34. Published

    Precipitation evolution of γ´ hardened fcc Fe-Ni based alloys

    Juarez Perez, L., 2023

    Research output: Thesis › Master's Thesis

  35. Published

    Prediction of fracture toughness and DBTT of a 15-5 PH steel

    Widowitsch, N., 2023

    Research output: Thesis › Master's Thesis

  36. Published

    Prediction of ring crack initiation in ceramics and glasses using a stress–energy fracture criterion

    Papšík, R., Sevecek, O., Martin, E. & Bermejo Moratinos, R., 2023, In: Journal of the American Ceramic Society.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Processing of ceramic materials with tailored microstructures deploying tape casting and stereolithographic 3D-printing

    Hofer, A.-K., 2023

    Research output: Thesis › Doctoral Thesis

  38. Published

    Process-structure-property relationships of β-NiAl and η-Ni3Ti strengthened Co-free maraging steels

    Zeisl, S., 2023

    Research output: Thesis › Doctoral Thesis

  39. Published

    Production of damage tolerant Ti-6Al-4V by laser powder bed fusion (L-PBF)

    Kapala, J. M., 2023

    Research output: Thesis › Master's Thesis

  40. Published

    Radionuclide removal from aqueous solutions by oxidized carbon fabrics

    Ioannidis, I., Pashalidis, I., Mulla, B., Kotanidis, G., Ioannou, K., Constantinides, G., Kostoglou, N. & Rebholz, C., 2023.

    Research output: Contribution to conference › Poster › Research

  41. Published

    Realistic structural properties of amorphous SiNx from machine-learning-assisted molecular dynamics

    Nayak, G. K., Prashanth, S., Todt, J., Daniel, R. & Holec, D., 2023.

    Research output: Contribution to conference › Poster › Research

  42. Published

    Refractory high entropy alloy thin films as diffusion barriers for microelectronic applications

    Gruber, G., 2023

    Research output: Thesis › Doctoral Thesis

  43. Published

    Reliability of copper-fiber reinforced laminates

    Ruderes, K., 2023

    Research output: Thesis › Master's Thesis

  44. Published

    Removal of crystal violet dye from aqueous solutions through adsorption onto activated carbon cloth materials

    Mulla, B., Ioannou, K., Kotanidis, G., Ioannidis, I., Constantinides, G., Kostoglou, N., Pashalidis, I. & Rebholz, C., 2023.

    Research output: Contribution to conference › Poster › Research

  45. Published

    Reply to Quinn GD, Salem JA, Swab JJ. Comment On: Lubauer J, Lohbauer U, Henrich M, Munz M, Lube T, Belli R. Intricacies involving the evaluation of fracture toughness obtained by the surface-crack-in-flexure method. J Am Ceram Soc. 2022;105(12):7582-7599

    Belli, R., Lubauer, J., Lohbauer, U., Henrich, M., Munz, M. & Lube, T., 2023, In: Journal of the American Ceramic Society. p. 6371-6377

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Simulation of the mechanical response of the individual intermetallic phases in multi-phase γ titanium aluminides

    Seligmann, B., Spörk-Erdely, P. & Antretter, T., 2023.

    Research output: Contribution to conference › Poster › Research

  47. Published

    Simultaneously increasing strength and ductility of nano-crystalline Cu-Zn-alloys made from powderous raw materials

    Holub, G., 2023

    Research output: Thesis › Master's Thesis

  48. Published

    Spatially resolved peak decomposition of 3D atom probe tomography datasets

    Schiester, M., Konstantiniuk, F., Schalk, N. & Tkadletz, M., 2023.

    Research output: Contribution to conference › Poster › Research

  49. Published

    SPD Deformation of Pearlitic, Bainitic and Martensitic Steels

    Kapp, M. W., Hohenwarter, A., Bachmaier, A., Müller, T. & Pippan, R., 2023, In: Materials transactions. 64.2023, 7, p. 1353-1363 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Strain Engineering in Trench Power MOSFETs: Characterization and Optimization of Mechanical and Electrical Transistor Properties

    Karner, S., 2023

    Research output: Thesis › Doctoral Thesis

  51. Published

    Strength testing of ceramics: Reassessment of methods and application to additive manufacturing

    Staudacher, M., 2023

    Research output: Thesis › Doctoral Thesis

  52. Published

    Structural and Mechanical Property Investigation of Metallic Glasses

    Rezvan, A., 2023

    Research output: Thesis › Doctoral Thesis

  53. Published

    Structure and migration mechanisms of small vacancy clusters in Cu: A combined EAM and DFT study

    Fotopoulos, V., Mora-Fonz, D., Kleinbichler, M., Bodlos, R., Kozeschnik, E., Romaner, L. & Shluger, A. L., 2023, In: Nanomaterials. 13.2023, 9, 19 p.

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    Structure-Property Relationships in Substituted BaTiO3: A Theoretical Study

    Mayer, F., 2023

    Research output: Thesis › Doctoral Thesis

  55. Published

    Synchrotron-Based Characterization of Bulk Metallic Glasses

    Rovira Ferrer, D., 2023

    Research output: Thesis › Master's Thesis

  56. Published

    Synthesis and Characterization of High Entropy Alloy Nitrides

    Tabelander, M., 2023

    Research output: Thesis › Master's Thesis

  57. Published

    Tailoring α2/γ and γ/γ interfaces in TiAl alloys via segregation: A multi-method study

    Gehringer, D., Holec, D., Huber, L. & Neugebauer, J., 2023.

    Research output: Contribution to conference › Poster › Research

  58. Published

    Tape casting of Cr2AlC MAX phase for multi-material designs

    Prötsch, T., 2023

    Research output: Thesis › Master's Thesis

  59. Published

    Temperature effect during mechanical alloying on the yttria evolution in the processing of an ODS FeCrMnNiCo alloy

    Mayer, M., 2023

    Research output: Thesis › Doctoral Thesis

  60. Published

    Templated grain growth in rapid sintered 3D-printed alumina ceramics

    Hofer, A.-K., Kocjan, A. & Bermejo Moratinos, R., 2023, In: Open ceramics. 15, 100428.

    Research output: Contribution to journal › Article › Research › peer-review

  61. Published

    The effect of liquid phase chemistry on the densification and strength of cold sintered ZnO

    Jabr, A., Fanghanel, J., Zongming, F., Bermejo, R. & Randall, C. A., 2023, In: Journal of the European Ceramic Society. 43.2023, 4, p. 1531-1541 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  62. Published

    The effects of grain size on the elastic response of FeCrMnNiCo high entropy alloy: a molecular dynamics study

    Zetterberg, K., 2023

    Research output: Thesis › Master's Thesis

  63. Accepted/In press

    The Influence of Phase Formation on Irradiation Tolerance in a Nanocrystalline TiZrNbHfTa Refractory High-Entropy Alloy

    Moschetti, M., Xu, A., Hohenwarter, A., Wei, T., Davis, J., Short, K., Thorogood, G. J., Kong, C., Couzinié, J.-P., Bhattacharyya, D., Kruzic, J. J. & Gludovatz, B. P., 2023, (Accepted/In press) In: Advanced Engineering Materials. ??? Stand: 16. Februar 2024, ??? Stand: 16. Februar 2024, 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  64. Published

    The micromechanical characterization of silicon up to 950 °C

    Schaffar, G. J. K., Tscharnuter, D. & Maier-Kiener, V., 2023.

    Research output: Contribution to conference › Poster › Research

  65. Published

    Thermal shock behavior of 3D-printed alumina ceramics with spatially tailored porosity

    Bastos Mateus, L., 2023

    Research output: Thesis › Master's Thesis

  66. Published

    Towards Atom Probe Crystallography of Thin Films

    Rainer, D., 2023

    Research output: Thesis › Master's Thesis

  67. Published

    Untersuchung der Kontaktschädigung von Kugellagerkugeln aus Siliziumnitrid

    Pasterk, M., 2023

    Research output: Thesis › Master's Thesis

  68. Published

    Variation der Lösungsglühtemperatur und Festigkeitsmodellierung von Fe-12Ni Maraging-Stählen

    Karner, M., 2023

    Research output: Thesis › Master's Thesis

  69. 2022
  70. Published

    Transformation of amorphous passive oxide film on Zr65Cu17.5Ni10Al7.5 metallic glass ribbons

    Sarac, B., Kvaratskheliya, A., Zadorozhnyy, V., Ivanov, Y. P., Klyamkin, S., Xi, L., Berdonosova, E., Kaloshkin, S., Zadorozhnyy, M. & Eckert, J., 25 Dec 2022, In: Journal of alloys and compounds. 929.2022, 25 December, 8 p., 167265.

    Research output: Contribution to journal › Article › Research › peer-review

  71. Published

    Elucidation of formation and transformation mechanisms of Ca-rich Laves phase in Mg-Al-Ca-Mn alloys

    LI, J., Zhou, X., Breen, A., Peng, Z., Su, J., Kürnsteiner, P., Correa, M. J. D., Chwałek, M. L., Wang, H., Holec, D., Mayer, J. & Dehm, G., 20 Dec 2022, In: Journal of alloys and compounds. 928.2022, 20 December, p. 1-12 12 p., 167177.

    Research output: Contribution to journal › Article › Research › peer-review

  72. Published

    Advances in multi-scale mechanical characterization

    Mangalampalli, K., Ghosh, P., Volpi, F., Kiener, D. & Useinov, A., 8 Dec 2022, In: Journal of applied physics. 132:2022, 22, 4 p., 220401.

    Research output: Contribution to journal › Editorial › peer-review

  73. Published

    Enhanced mechanical performance of gradient-structured CoCrFeMnNi high-entropy alloys induced by industrial shot-blasting

    Zhang, M. Z., Zhang, K., Song, K., Zou, X. Y., Song, W. D., Li, K. F., Hu, L.-N., Zhang, Z.-Q. & Eckert, J., 7 Dec 2022, In: Rare Metals. 42.2023, March, p. 982-993 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  74. Published

    Long-Range Magnetic Order in Nickel Hydroxide-Functionalized Graphene Quantum Dots

    Michal, L., Roy, R., Holec, D., Perez, J. G., Pizurová, N., Necas, D., Doleckova, A., Medalova, J., Lepcio, P. & Zajickkova, L., 7 Dec 2022, In: Journal of physical chemistry letters. 13.2022, 49, p. 11536-11542 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  75. Published

    Laser powder bed fusion of intermetallic titanium aluminide alloys using a novel process chamber heating system: A study on feasibility and microstructural optimization for creep performance

    Wartbichler, R., Maiwald-Immer, T., Pürstl, F. & Clemens, H., 5 Dec 2022, In: Metals : open access journal . 12.2022, 12, 23 p., 2087.

    Research output: Contribution to journal › Article › Research › peer-review

  76. Published

    Iron oxide - poly(m-anthranilic acid)-poly(ϵ-caprolactone) electrospun composite nanofibers: fabrication and properties

    Huner, K., Sarac, B., Yüce, E., Rezvan, A., Micusik, M., Omastova, M., Eckert, J. & Sarac, A. S., 2 Dec 2022, In: Molecular Systems Design and Engineering. 8.2023, 3, p. 394-406 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  77. Published

    Limpet teeth microstructure unites auxeticity with extreme strength and high stiffness

    Oh, S. H., Kim, J.-K., Liu, Y., Wurmshuber, M., Peng, X.-L., Seo, J., Jeong, J., Wang, Z., Wilmers, J., Soyarslan, C., Kim, J., Kittiwirayanon, B., Jeong, J., Kim, H.-J., Huh, Y. H., Kiener, D., Bargmann, S. & Gao, H., 2 Dec 2022, In: Science Advances. 8.2022, 48, 10 p., eadd4644.

    Research output: Contribution to journal › Article › Research › peer-review

  78. Published

    Degradation of regenerated cellulose filaments by hydrogen chloride under aqueous and non-aqueous conditions

    Ungerer, B., Sulaeva, I., Bodner, S., Potthast, A., Keckes, J., Müller, U. & Veigel, S., Dec 2022, In: Carbohydrate polymer technologies and applications. 4.2022, December, 9 p., 100238.

    Research output: Contribution to journal › Article › Research › peer-review

  79. Published

    Probing the stability, adhesion strength, and fracture mechanism of Mg/Al2Y interfaces via first-principles calculations

    Zhou, Y., Wang, H., Dong, Q., Tan, J., Chen, X., Jiang, B., Pan, F. & Eckert, J., Dec 2022, In: Materials Today Communications. 33.2022, December, 11 p., 104612.

    Research output: Contribution to journal › Article › Research › peer-review

  80. Published

    Shear-band blunting governs superior mechanical properties of shape memory metallic glass composites

    Zhang, L., Yan, T., Şopu, D., Wu, Y., Jiang, B., Du, K., Zhang, H. & Eckert, J., Dec 2022, In: Acta Materialia. 241.2022, December, 12 p., 118422.

    Research output: Contribution to journal › Article › Research › peer-review

  81. E-pub ahead of print

    On the Temperature-Induced Equilibration of Phase Distribution and Microstructure in a Gas-Atomized Titanium Aluminide Powder

    Musi, M., Clemens, H., Stark, A. & Spörk-Erdely, P., 26 Nov 2022, (E-pub ahead of print) In: Advanced engineering materials. 25.2023, 6, 6 p., 2201242.

    Research output: Contribution to journal › Article › Research › peer-review

  82. Published

    Phase Transformation Induced by High Pressure Torsion in the High-Entropy Alloy CrMnFeCoNi

    Chulist, R., Pukenas, A., Chekhonin, P., Hohenwarter, A., Pippan, R., Schell, N. & Skrotzki, W., 25 Nov 2022, In: Materials. 2022, 15, 18 p., 8407.

    Research output: Contribution to journal › Article › Research › peer-review

  83. Published

    Stahlrecycling – Potenziale und Herausforderungen für innovatives und nachhaltiges Recycling

    Dworak, S., Fellner, J., Beermann, M., Häuselmann, M., Schenk, J., Michelic, S. K., Cejka, J., Sakic, A., Mayer, J. & Steininger, K., 25 Nov 2022, In: Österreichische Wasser- und Abfallwirtschaft : ÖWAW . 75.2023, Februar, p. 97-107 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  84. E-pub ahead of print

    An improved process scan strategy to obtain high-performance fatigue properties for Scalmalloy®

    Schimbäck, D., Mair, P., Kaserer, L., Perfler, L., Palm, F., Leichtfried, G. & Pogatscher, S., 22 Nov 2022, (E-pub ahead of print) In: Materials and Design. 224.2022, December, 11 p., 111410.

    Research output: Contribution to journal › Article › Research › peer-review

  85. Published

    Graded Inconel-stainless steel multi-material structure by inter- and intralayer variation of metal alloys

    Bodner, S., Hlushko, K., van de Vorst, L. T. G., Meindlhumer, M., Todt, J., Nielsen, M. A., Hooijmans, J. W., Saurwalt, J. J., Mirzaei, S. & Keckes, J., 19 Nov 2022, In: Journal of Materials Research and Technology. 21.2022, November-December, p. 4846-4859 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  86. Published

    Critical Aspects Concerning Large-scale Production of a Batch-annealed Medium-Mn 780 MPa Grade for Automotive Applications

    Steineder, K., Krizan, D., Stadler, M., Ritsche, S., Berger, E., Holtmann, N., Schnitzer, R. & Schneider, R., 18 Nov 2022, In: Berg- und hüttenmännische Monatshefte : BHM. 167.2022, 11, p. 513-516 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  87. Published

    Publisher Correction: In situ fracture observations of distinct interface types within a fully lamellar intermetallic TiAl alloy (Journal of Materials Research, (2021), 36, 12, (2465-2478), 10.1557/s43578-020-00088-z)

    Burtscher, M., Alfreider, M., Schmuck, K. S., Clemens, H., Mayer, S. & Kiener, D., 14 Nov 2022, In: Journal of Materials Research. 37.2021, p. 3855 1 p.

    Research output: Contribution to journal › Comment/debate › peer-review

  88. Published

    The role of alloying elements in NiAl and Ni3Ti strengthened Co-free maraging steels

    Zeisl, S., Landefeld, A., Van Steenberge, N., Chang, Y. & Schnitzer, R., 9 Nov 2022, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 861.2022, 19 December, 9 p., 144313.

    Research output: Contribution to journal › Article › Research › peer-review

  89. Published

    Microstructure, Plasticity and Ductility of a TNM+ Alloy Densified by Spark Plasma Sintering

    Musi, M., Deshayes, C., Molénat, G., Toualbi, L., Galy, B., Spörk-Erdely, P., Hantcherli, M., Monchoux, J.-P., Thomas, M., Clemens, H. & Couret, A., 8 Nov 2022, In: Metals : open access journal . 12.2022, 11, 22 p., 1915.

    Research output: Contribution to journal › Article › Research › peer-review

  90. E-pub ahead of print

    Effect of cold deformation on the stress corrosion cracking resistance of a high-strength stainless steel

    Truschner, M., Janda, A., Bodner, S. C., Keplinger, A. & Mori, G. K., 6 Nov 2022, (E-pub ahead of print) In: Journal of materials science. 57.2022, November, p. 20447–20461 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  91. Published

    Surmounting the thermal processing limits: Patterning TiZrCuPdSn bulk metallic glass even with nanocrystallization

    Cai, F.-F., Sarac, B., Chen, Z., Czibula, C. M., Spieckermann, F. & Eckert, J., 4 Nov 2022, In: Materials today advances. 16.2022, December, 8 p., 100316.

    Research output: Contribution to journal › Article › Research › peer-review

  92. Published

    Mechanical performance of doped W–Cu nanocomposites

    Wurmshuber, M., Burtscher, M., Doppermann, S., Bodlos, R., Scheiber, D., Romaner, L. & Kiener, D., 1 Nov 2022, In: Materials Science and Engineering A. 857.2022, 1 November, 12 p., 144102.

    Research output: Contribution to journal › Article › Research › peer-review

  93. Published

    Optimal tensile properties of laser powder bed fusion hereditary basket-weave microstructure in additive manufactured Ti6Al4V

    Lu, S., Zhang, Z., Liu, R., Zhou, X., Wang, X., Zhang, B. N., Zhao, X., Eckert, J. & Zhang, Z., Nov 2022, In: Additive Manufacturing. 59.2022, November Part A, 14 p., 103092.

    Research output: Contribution to journal › Article › Research › peer-review

  94. Published

    Mechanical Properties and Microstructural Evolution of Ti-25Nb-6Zr Alloy Fabricated by Spark Plasma Sintering at Different Temperatures

    Zhu, Q., Chen, P., Xiao, Q., Li, F., Yi, J., Prashanth, K. G. & Eckert, J., 27 Oct 2022, In: Metals. 12.2022, 11, 13 p., 1824.

    Research output: Contribution to journal › Article › Research › peer-review

  95. Published

    Accurate ab initio modeling of solid solution strengthening in high entropy alloys

    Moitzi, F., Romaner, L., Ruban, A. V. & Peil, O., 24 Oct 2022, In: Physical review materials . 6.2022, 10, 18 p.

    Research output: Contribution to journal › Article › Research › peer-review

  96. Published

    Determination of Cooling Rate and Temperature Gradient during Formation of Cathode Spot Craters in a Vacuum Arc

    Mogeritsch, J., Franz, R., Golizadeh, M., Mitterer, C. & Kharicha, A., 19 Oct 2022, In: Crystals. 12.2022, 10, 13 p., 1486.

    Research output: Contribution to journal › Article › Research › peer-review

  97. Published

    Theory of asymmetric and piezotronically modified double Schottky barriers

    Kaufmann, B. & Supancic, P., 14 Oct 2022, In: Journal of applied physics. 132, 14

    Research output: Contribution to journal › Article › Research › peer-review

  98. E-pub ahead of print

    Anomalous thermal conductivity in amorphous niobium pentoxide thin films: A correlation study between structure and thermal properties

    Mitterhuber, L. M., Kaliyaperumal Veerapandiyan, V., Deluca, M., Misture, S., Schaeperkoetter, J., Tkadletz, M., Mitterer, C. & Spitaler, J., 13 Oct 2022, (E-pub ahead of print) In: Materialia. 26.2022, December, 9 p., 101601.

    Research output: Contribution to journal › Article › Research › peer-review

  99. Published

    Designing lightweight multicomponent magnesium alloys with exceptional strength and high stiffness

    Gu, Z., Zhou, Y., Dong, Q., He, G., Cui, J., Tan, J., Chen, X., Jiang, B., Pan, F. & Eckert, J., 10 Oct 2022, In: Materials Science and Engineering A. 855.2022, 10 October, 10 p., 143901.

    Research output: Contribution to journal › Article › Research › peer-review

  100. Published

    Enhancement in strength and thermal stability of selective laser melted Al–12Si by introducing titanium nanoparticles

    Qi, J., Liu, C. Y., Chen, Z. W., Liu, Z. Y., Tian, J. S., Feng, J., Okulov, I. V., Eckert, J. & Wang, P., 10 Oct 2022, In: Materials Science and Engineering A. 855.2022, 10 October, 12 p., 143833.

    Research output: Contribution to journal › Article › Research › peer-review

  101. E-pub ahead of print

    Enhanced mechanical properties of Zr65Cu15Ni10Al10bulk metallic glass by simultaneously introducing surface grooves and multiple shear bands

    Yuan, X., Zhang, Z., Gao, Q., Zhou, L., Song, K., Zou, X., Şopu, D., Hu, L., Sun, B. & Eckert, J., 4 Oct 2022, (E-pub ahead of print) In: Journal of Materials Research and Technology. 21.2022, November-December, p. 1490-1506 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  102. E-pub ahead of print

    The effect of zirconium on the Ti-(42-46 at.%)Al system

    Musi, M., Kardos, S., Hatzenbichler, L., Holec, D., Stark, A., Allen, M., Güther, V., Clemens, H. & Spörk-Erdely, P., 2 Oct 2022, (E-pub ahead of print) In: Acta materialia. 241.2022, December, 13 p., 118414.

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 4 5 6 7 8 ...55 Next
View graph of relations

Contact information

Roseggerstraße 12 / Max-Tendler-Straße 9/1.UG, 8700 Leoben