Chair of Metal Forming (560)

Organisational unit: Chair

401 - 500 out of 731Page size: 100

Research output

  1. 2009
  2. Published

    Grain growth in dependence of different annealing times and temperatures in austenitic stainless steel (Böhler A607) 304L

    Winter, G., 2009, 125 p.

    Research output: Thesis › Master's Thesis

  3. Published

    Herstellung von Stahl-Aluminium-Werkstoffverbunden durch Walzplattieren

    Lehofer, H. & Buchmayr, B., 2009, 4. Landshuter Leichtbau-Colloquium (26.-27.2.2009, Hochschule Landshut). LC-Verl., p. 187-193

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  4. Published

    Improving mechanical properties of an aluminium alloy with chills

    Pabel, T. & Schindelbacher, G., 2009, In: Casting plant and technology international. 24, 3, p. 16-23

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Improving the dynamic and stability behavior of plates by laser treatment

    Bilik, C., Rammerstorfer, F. G., Daxner, T., Figala, G. & Buchmayr, B., 2009, 6th ICCSM Int. Congress of Croatian Society of Mechanics Dubrovinik.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. Published

    Investigation of a Cogging Process for Surface Densification of PM Gears by FEM Simulation

    Planitzer, F., Hatzenbichler, T. & Buchmayr, B., 2009,

    Proceedings of the MPIF/APMI International Conference on Powder Metallurgy & Particulate Materials

    .     p. 0-0

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  7. Published

    Investigation of the material flow of a warm formed profile

    Harrer, O.-K., Wallner, S. & Buchmayr, B., 2009,

    Hot forming of Steels & Product Properties

    .     p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    Kaltumformen mittels Rundkneten

    Wallner, S., Hofer, F., Koppensteiner, R., Wieser, R. & Harrer, O.-K., 2009, Kaltumformen mittels Rundkneten. Montanuniversität Leoben, Lehrstuhl für Umformtechnik, p. 113-118

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. Published

    Kaltumformung - eine systemanalytische Betrachtung

    Buchmayr, B., 2009, Kaltumformung - eine systemanalytische Betrachtung. Montanuniversität Leoben, Lehrstuhl für Umformtechnik, p. 5-9

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. Published

    Microstructural aspects and recrystallization behaviour of the direkt rolling of steel using laborytory simulation

    Gelder, S. & Buchmayr, B., 2009,

    Hot forming of Steels & Product Properties

    .     p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  11. Published

    Modellierung und Simulation des Schrägwalzens von Rundknüppeln zu Rohrluppen unter Berücksichtigung der Mikrostrukturentwicklung und der Umformbarkeit von Primärstrukturen

    Pschera, R., 2009

    Research output: Thesis › Doctoral Thesis

  12. Published

    Modelling of microstructure evolution in hot work tool steels during service

    Krumphals, F., Wlanis, T., Sommitsch, C., Holzer, I., Sonderegger, B. & Wieser, V., 2009, In: Computer methods in materials science. 9, p. 228-233

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Modelling the Critical Conditions for the Rolling of Seamless Pipes

    Pschera, R., Klarner, J.K.-H. & Sommitsch, C., 2009, TMS 2009 Proceedings - Materials Processing and Manufacturing Division.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  14. Published

    Modelling the Forming Limit during Cross-Rolling of Seamless Pipes using a Modified Continuum Damage Mechanics Approach

    Pschera, R., Klarner, J.K.-H. & Sommitsch, C., 2009, 3rd International Conference Simuation and Modelling of Metallurgical Processes in Steelmaking. p. 201-209

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  15. Published

    Neue Wege in der Computertomographie und in der Bauteilprüfung

    Geier, G., Brunke, O., Pabel, T., Rosc, J. & Habe, D., 2009, In: ZfP-Zeitung. 10, p. 22-25

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Optische Messungen zur Ermittlung der Eigenspannungen an Kaltbändern

    Forstner, K. & Buchmayr, B., 2009, Optische Messungen zur Ermittlung der Eigenspannungen an Kaltbändern. Montanuniversität Leoben, Lehrstuhl für Umformtechnik, p. 119-124

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    Physikalisch basierte Modellierung der Gefügeentwicklung während des Warmwalzens von Aluminiumlegierungen

    Sherstnev, P., 2009

    Research output: Thesis › Doctoral Thesis

  18. Published

    Physikalische Simulation der Gefügeentwicklung im Zuge des Direkteinsatzes

    Gelder, S., Buchmayr, B., Stöckl, C., Linzer, B. & Hohenbichler, G., 2009, Physikalische Simulation der Gefügeentwicklung im Zuge des Direkteinsatzes. p. 91-100

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. Published

    Projektbericht 05 (Jänner) zum Projekt A3.5

    Planitzer, F., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  20. Published

    Projektbericht 05 (Juli) zum Projekt A3.5

    Planitzer, F., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  21. Published

    Projektstatus April 2009 zum Projekt A3.5

    Hatzenbichler, T. & Planitzer, F., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  22. Published

    Projektstatus Jänner 2009 zum Projekt A3.5

    Hatzenbichler, T. & Planitzer, F., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  23. Published

    Projektstatus Juni 2009 zum Projekt A3.5

    Hatzenbichler, T. & Planitzer, F., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  24. Published

    Projektstatus November 2009 zum Projekt A3.5

    Hatzenbichler, T. & Planitzer, F., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  25. Published

    Projektstatus Oktober 2009 zum Projekt A3.5

    Hatzenbichler, T. & Planitzer, F., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  26. Published

    Projektstatus September 2009 zum Projekt A3.5

    Hatzenbichler, T. & Planitzer, F., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  27. Published

    Radialschmieden im Einstechverfahren

    Wallner, S., Harrer, O.-K. & Buchmayr, B., 2009, Radialschmieden im Einstechverfahren. p. 19-28

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  28. Published

    Recrystallization and grain growth in the nickel-based superalloy Allvac 718Plus / Dedicated to Professor Dr. Franz Jeglitsch on the occasion of his 75th birthday

    Sommitsch, C., Huber, D., Ingelman-Sundberg, F., Mitsche, S., Stockinger, M. & Buchmayr, B., 2009, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 100, p. 1088-1098

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Reduction of Porosity in PM Components by Metal Forming Technologies

    Hatzenbichler, T., Buchmayr, B. & Planitzer, F., 2009, COMET MPPE Workshop Damage, Materials Center Leoben. p. 1-11

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. Published

    Simulation des Kopfstauchens unter Berücksichtigung des Vorzuges

    Hatzenbichler, T. & Buchmayr, B., 2009, Simulation des Kopfstauchens unter Berücksichtigung des Vorzuges. Montanuniversität Leoben, Lehrstuhl für Umformtechnik, p. 73-79

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  31. Published

    Steigerung der mechanischen Eigenschaften einer Al-Legierung durch Kühlkokillen

    Pabel, T. & Schindelbacher, G., 2009, In: Giesserei. p. 32-38

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Thermomechanische Behandlung beim Walzen von nahtlosen Stahlrohren

    Klarner, J.K.-H., 2009, 172 p.

    Research output: Thesis › Doctoral Thesis

  33. Published

    Umformtechnischer Leichtbau

    Buchmayr, B., 2009, Leichtbau Prinzipien, Werkstoffauswahl und Fertigungsvarianten. p. 214-246

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  34. Published

    Untersuchung des meta-dynamischen Rekristallisationsverhaltens der Nickelbasislegierung Allvac 718PlusTM und Optimierung der numerischen Gefügesimulation in Deform 2DTM

    Huber, D., 2009

    Research output: Thesis › Diploma Thesis

  35. Published

    Untersuchungen verschiedener Technologien zur Herstellung von Werkstoffverbunden aus Eisenbasislegierungen

    Schramhauser, S., 2009

    Research output: Thesis › Master's Thesis

  36. Published

    Verbesserung der mechanischen Eigenschaften von Al-Legierungen durch den Nachfolgeprozess HIPen

    Pabel, T. & Schindelbacher, G., 2009, In: Giesserei-Praxis. p. 67-70

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Verbesserung der mechanischen Eigenschaften von Al-Legierungen durch den Nachfolgeprozess HIPen

    Pabel, T. & Schindelbacher, G., 2009, In: Gießerei-Rundschau. p. 126-128

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Werkstoffe für die Energietechnik - Anforderungen, Anwendungen und Entwicklungspotenziale

    Buchmayr, B., 2009, In: Berg- und hüttenmännische Monatshefte : BHM. 5, p. 181-188

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    XXVIII. Verformungskundliches Kolloquium

    Buchmayr, B. (Editor) & Harrer, O.-K. (Editor), 2009, Leoben, Österreich: Eigenverlag.

    Research output: Book/Report › Anthology › Research

  40. Published

    Zwischenbericht Juni 2009 "Walzplattieren" zum Projekt P056-01-20

    Lehofer, H., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  41. Published

    Zwischenbericht März 2009 "Walzplattieren" zum Projekt P056-01-20

    Lehofer, H., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  42. Published

    Zwischenbericht September 2009 "Walzplattieren" zum Projekt P056-01-20

    Lehofer, H., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  43. 2008
  44. Published

    Automatic feature extraction from micrographs of forged superalloys

    Berhuber, E., Rinnhofer, A., Stockinger, M., Benesova, W. & Jakob, G., Jul 2008, In: JOM. 60, 7, p. 49-53 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Characterization of δ-phase in superalloy Allvac 718Plus™

    Stotter, C., Sommitsch, C., Wagner, J., Leitner, H., Letofsky-Papst, I., Zickler, G. A., Prantl, W. & Stockinger, M., Apr 2008, In: Zeitschrift fuer Metallkunde/Materials Research and Advanced Techniques. 99, 4, p. 376-380 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Alternative Verfahren zum Nachverdichten von Zahnrädern aus P/M - Werkstoffen

    Planitzer, F., 2008

    Research output: Thesis › Diploma Thesis

  47. Published

    Ausscheidungskinetik während der Homogenisierung und Gefügeentwicklung während der Warmumformung der Aluminiumlegierung AA6082

    Sherstnev, P., Sommitsch, C., Mitsche, S., Hacksteiner, M. & Ebner, T., 2008, XXVII. Verformungskundliches Kolloquium. p. 123-130

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  48. Published

    Bestimmung der Einflussfaktoren auf die Haftfestigkeit von Aluminium-Stahl-Verbundblechen

    Buchner, M., 2008, 134 p.

    Research output: Thesis › Doctoral Thesis

  49. Published

    Characterisation of different lubricants concerning the friciton coefficient in forging of AA2618

    Buchner, B., Maderthoner, G. & Buchmayr, B., 2008, In: Journal of materials processing technology. 198, p. 41-47

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Characterisation of the subgrain structure of the aluminium alloy AA6082 after homogenization and hot forming by EBSD

    Mitsche, S., Sherstnev, P., Sommitsch, C., Ebner, T. & Hacksteiner, M., 2008, Characterisation of the subgrain structure of the aluminium alloy AA6082 after homogenization and hot forming by EBSD. p. 579-580

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  51. Published

    Charakterisierung der Luftfahrtlegierung AA7050 zur Optimierung des industriellen Warmwalzens

    Weber, A. M., 2008

    Research output: Thesis › Master's Thesis

  52. Published

    Comparison of experimental and Finite Element Modelling of the extrusion of AA6082 on both tools and extrudate as a function of process parameters

    Krumphals, F., Flitta, I., Mitsche, S., Wlanis, T., Jahn, A. & Sommitsch, C., 2008, ESAFORM 2008. p. 1-4

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  53. Published

    Comparison of Yield Functions for Compressible PM-Materials

    Wallner, S., Hatzenbichler, T. & Buchmayr, B., 2008, XXVII. Verformungskundliche Kolloquium, 8.-11.3.2008, Planneralm/Donnersbach. Lehrstuhl für Umformtechnik. Bruno Buchmayr, p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  54. Published

    Comparison of yield functions for pm-materials

    Wallner, S., Hatzenbichler, T. & Buchmayr, B., 2008, Metform Conference 2008. p. 473-478

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  55. Published

    Computertomographie - ein Prüfverfahren mit Zukunft“, Gießereirundschau

    Geier, G. & Pabel, T., 2008, In: Gießerei-Rundschau. p. 90-90

    Research output: Contribution to journal › Article › Research › peer-review

  56. Published

    Creep and Fatigue Damage in Hot Work Tools Steels during Copper and Aluminium Extrusion

    Sommitsch, C., Wlanis, T., Hatzenbichler, T. & Riedl, C., 2008, Key engineering materials. p. 169-176 (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  57. Published

    Creep fatigue in hot work tool steels during copper extrusion

    Krumphals, F., Wlanis, T., Sommitsch, C., Buchner, B., Huber, D., Redl, C. & Wieser, V., 2008, Sixth International Conference on Low Cycle Fatigue. p. 721-726

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  58. Published

    Einsatz der Hochtemperatur-Photogrammetrie in der Messung der akkumulierten lokalen Verformungen und der Rissinitiierung

    Wlanis, T., 2008

    Research output: Thesis › Diploma Thesis

  59. Published

    FEM Modelling of Cross Rolling using Damage Mechanics

    Pschera, R., Klarner, J.K.-H. & Sommitsch, C., 2008, 12th international Conference of Metal Forming, Steel research international, Special Edition, Vol. 1, M. Pietrzyk et al. Eds.. p. 349-356

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  60. Published

    Gekoppelte Umform- und Gefügesimulation beim Radial- und Gesenkschmieden

    Harrer, O.-K., Sommitsch, C. & Buchmayr, B., 2008, MEFORM 2008, Simulation von Umformprozessen. Inst. für Metallformung, p. 18-27

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  61. Published

    Halbjahresbericht August 2008

    Taschauer, M., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  62. Published

    Halbjahresbericht Februar 2008

    Taschauer, M., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  63. Published

    Implementieren von Fließbedingungen in DEFORM 3DTM zur FEM Simulation der Verdichtung von PM-Werkstoffen

    Wallner, S., Hatzenbichler, T. & Buchmayr, B., 2008, In: Berg- und hüttenmännische Monatshefte : BHM. 153, p. 435-438

    Research output: Contribution to journal › Article › Research › peer-review

  64. Published

    Interactive Volume Exploration for Feature Detection and Quantification in Industrial CT Data

    Hadwiger, M., Fritz, L., Rezk-Salama, C., Geier, G. & Pabel, T., 2008, IEEE Transactions on Visualisation and Computer Graphics 14 (6), (2008). p. 1507-1514

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  65. Published

    Interaktive Exploration und Quantifizierung von Ungänzen in komplexen Bauteilen

    Geier, G., Hadwiger, M., Höllt, T., Fritz, L. & Pabel, T., 2008, Industrielle Computertomographie Tagung. p. 1-5

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  66. Published

    Interaktive Exploration von multiphasigen, mineralischen Werkstoffen mittels Computertomographie

    Geier, G., Pabel, T., Hadwiger, M., Fritz, L. & Höllt, T., 2008, Berichtsband DACH Jahrestagung zerstörungsfreie Werkstoffprüfung. p. 251-257

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  67. Published

    Investigation of different parameters on roll bonding quality of aluminium and steel sheets

    Buchner, M., Buchner, B., Buchmayr, B., Kilian, H. & Riemelmoser, F., 2008, 11th ESAFORM Conference on Material Forming.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  68. Published

    Investigation of different parameters on roll bonding quality of aluminium and steel sheets

    Buchner, M., Buchner, B., Buchmayr, B., Kilian, H. & Riemelmoser, F., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  69. Published

    Investigation of different parameters on roll bonding quality of aluminium and steel sheets

    Buchner, M., Buchner, B., Buchmayr, B., Kilian, H. & Riemelmoser, F., 2008, In: International journal of material forming. 1, p. 1279-1282

    Research output: Contribution to journal › Article › Research › peer-review

  70. Published

    Investigation of Friction in Closed-Die Warm Forging of Aluminium Alloys

    Buchner, B., 2008, 118 p.

    Research output: Thesis › Doctoral Thesis

  71. Published

    Investigation of friction in warm forging of AA6082

    Buchner, B., Weber, A. & Buchmayr, B., 2008, 11th ESAFORM Conference on Material Forming. p. 1-4

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  72. Published

    Investigation of friction in warm forging of AA6082

    Buchner, B., Weber, A. & Buchmayr, B., 2008, In: International journal of material forming. 1, p. 1215-1218

    Research output: Contribution to journal › Article › Research › peer-review

  73. Published

    Investigation of metallic materials by using novel multidimensional transfer functions

    Rosc, J., Geier, G., Hadwiger, M., Fritz, L., Pabel, T. & Habe, D., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  74. Published

    Investigations of retained deformation energy after hot forming and its influence on the abnormal grain growth of the nickel based alloy 80A

    Candic, M., Tian, B., Kleber, S., Mitsche, S. & Sommitsch, C., 2008, TMS 2008. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  75. Published

    Konstruktion, Bau und Inbetriebnahme einer kombinierten Torsions- und Reibschweißanlage

    Figala, G., 2008

    Research output: Thesis › Diploma Thesis

  76. Published

    Kriterien zur Auswahl von Fertigungsverfahren

    Buchmayr, B., 2008, 1. Workshop "Wirtschaftliche Fertigung". p. 1-4

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  77. Published

    Lifetime comparison of different hot work tool steels for extrusion tools in aluminium extrusion

    Sommitsch, C., Krumphals, F., Stotter, C., Dendl, D., Wlanis, T., Huber, D. & Redl, C., 2008, Lifetime comparison of different hot work tool steels for extrusion tools in aluminium extrusion. p. 1-12

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  78. Published

    Lifetime evaluation of two different hot work tool steels in aluminium extrusion

    Sommitsch, C., Sievert, R., Wlanis, T. & Redl, C., 2008, In: Computational materials science. 43, p. 82-91

    Research output: Contribution to journal › Article › Research › peer-review

  79. Published

    Microstructure modeling of the dynamic recrystallization kinetics during turbine disc forging of the nickel based superalloy Allvac 718PlusTM

    Huber, D., Stotter, C., Sommitsch, C., Mitsche, S., Poelt, P., Buchmayr, B. & Stockinger, M., 2008, Superalloys 2008, Roger C. Reed et al. Eds., TMS. p. 855-861

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  80. Published

    Microstructure modeling of the dynamic recrystallization kinetics during turbine disc forging of the nickel based superalloy Allvac 718PlusTM

    Huber, D., Stotter, C., Sommitsch, C., Mitsche, S., Poelt, P. & Buchmayr, B., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  81. Published

    Mikrostrukturentwicklung und duktile Schädigung beim Gesenkschmieden

    Sommitsch, C., Harrer, O.-K., Rüf, G. & Buchmayr, B., 2008, Der Pawelski - Umformtechnik im Spannungsfeld zwischen Plastomechanik und Werkstofftechnik. p. 113-123

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  82. Published

    Modellierung der Rekristallisationskinetik während der Warmumformung der Aluminiumlegierung 5083

    Sherstnev, P., Mitsche, S., Sommitsch, C., Melzer, C., Hacksteiner, M. & Ebner, T., 2008, In: Berg- und hüttenmännische Monatshefte : BHM. 153, p. 439-442

    Research output: Contribution to journal › Article › Research › peer-review

  83. Published

    Modellierung und Simulation des Lochbildungsprozesses während des Schrägwalzens unter Nutzung eines Schädigungsmodells in Forge2007

    Pschera, R., Klarner, J.K.-H. & Sommitsch, C., 2008, MEFORM 2008. p. 1-9

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  84. Published

    Modelling of Structure Evolution during Hot Working of AA5083

    Sherstnev, P., Mitsche, S., Sommitsch, C., Melzer, C., Hacksteiner, M. & Ebner, T., 2008, Aluminium Alloys, Their Physical and Mechanical Properties, J. Hirsch et al. (Eds.). p. 1077-1084

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  85. Published

    Modell zur Risikobetrachtung des Herstellungsprozesses geschweißter Edelstahlrohre

    Weiss, S., 2008

    Research output: Thesis › Doctoral Thesis

  86. Published

    Oberflächenverdichten von P/M-Zahnrädern durch Radialschmieden

    Planitzer, F., Hatzenbichler, T. & Buchmayr, B., 2008, In: Berg- und hüttenmännische Monatshefte : BHM. 153, p. 430-434

    Research output: Contribution to journal › Article › Research › peer-review

  87. Published

    Optimierung der Wärmebehandlungsparameter der Legierung EN AC-Al Si7Mg0.x

    Dambauer, G. & Pabel, T., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  88. Published

    Projektbericht 1/2008 zum Projekt A3.5

    Planitzer, F., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  89. Published

    Projektstatus April 2008 zum Projekt A3.5

    Hatzenbichler, T. & Planitzer, F., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  90. Published

    Projektstatus Februar 2008 zum Projekt A3.5

    Hatzenbichler, T. & Planitzer, F., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  91. Published

    Projektstatus Juli 2008 zum Projekt A3.5

    Hatzenbichler, T. & Planitzer, F., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  92. Published

    Projektstatus Mai 2008 zum Projekt A3.5

    Hatzenbichler, T. & Planitzer, F., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  93. Published

    Projektstatus September 2008 zum Projekt A3.5

    Hatzenbichler, T. & Planitzer, F., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  94. Published

    Simulation des Radialschmiedens

    Wallner, S., 2008, Deutschsprachiges Deform Anwendertreffen. p. 1-11

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  95. Published

    Substructure Development of AA6082 during Hot Deformation

    Poletti, C., Sherstnev, P., Schöbel, M. & Sommitsch, C., 2008, Aluminium Alloys, Their Physical and Mechanical Properties, J. Hirsch et al. (Eds.). p. 691-697

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  96. Published

    Test methodology for the formulation and selection of components of thread moulding oils

    Monetti, C., Buchner, B. & Hering, G., 2008, In: TriboTest. 14, p. 193-206

    Research output: Contribution to journal › Article › Research › peer-review

  97. Published

    The effect of the initial rolling temperature on the microstructure evolution during and after hot rolling of AA6082

    Sherstnev, P., Flitta, I., Sommitsch, C., Hacksteiner, M. & Ebner, T., 2008, ESAFORM 2008. p. 395-398

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  98. Published

    Tomographie assistée par ordinateur. Possibilités, espoirs et limites pratiques

    Geier, G., Pabel, T. & Schindelbacher, G., 2008, In: Fonderie, fondeur d'aujourd'huI. 274, p. 35-40

    Research output: Contribution to journal › Article › Research › peer-review

  99. Published

    Unterschätztes Potential - Methoden und Ergebnisse zur Optimierung der Wärmebehandlung von aushärtbaren Aluminium-Gusslegierungen

    Rockenschaub, H., Pabel, T., Geier, G., Dambauer, G. & Gschwandtner, R., 2008, In: Giesserei-Erfahrungsaustausch. 9, p. 34-39

    Research output: Contribution to journal › Article › Research › peer-review

  100. Published

    Untersuchung der rekristallisierten Kornstruktur der Nickelbasislegierung Allvac 718PlusTM durch unterschiedliche Ätzverfahren und Validierung der Ergebnisse mittels EBSD Messungen

    Winter, G., Petschenig, I., Huber, D., Sommitsch, C., Mitsche, S. & Stockinger, M., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  101. Published

    Vergleichende Untersuchungen zum Eindring- und Durchziehverhalten von Feinblechen

    Buchmayr, B., Hatzenbichler, T. & Kessler, F., 2008, In: Berg- und hüttenmännische Monatshefte : BHM. 153, p. 443-449

    Research output: Contribution to journal › Article › Research › peer-review

  102. Published

    Vergleichende Untersuchungen zum neutralen und reduzierenden Lochen an einem Versuchsschrägwalzwerk

    Pschera, R., Klarner, J.K.-H. & Sommitsch, C., 2008, In: Berg- und hüttenmännische Monatshefte : BHM. 153, p. 418-422

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 4 5 6 7 8 Next
View graph of relations

Contact information

Franz-Josef Straße 18, 8700 Leoben