Chair of Materials Physics (430)

Organisational unit: Chair

901 - 1000 out of 1,985Page size: 100

Research output

  1. 2016
  2. E-pub ahead of print

    Electrochemical deposition of hydroxyapatite on beta-Ti-40Nb

    Schmidt, R., Hoffmann, V., Helth, A., Gostin, P. F., Calin, M., Eckert, J. & Gebert, A., 26 Mar 2016, (E-pub ahead of print) In: Surface & coatings technology. 294.2016, 25 May, p. 186-193 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  3. E-pub ahead of print

    FIB-induced dislocations in Al submicron pillars: Annihilation by thermal annealing and effects on deformation behavior

    Lee, S., Jeong, J., Kim, Y., Han, S. M., Kiener, D. & Oh, S. H., 24 Mar 2016, (E-pub ahead of print) In: Acta materialia. 110.2016, 15 May, p. 283-294 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Low cycle fatigue of Cu thin films: Novel approaches for thermomechanical testing & microstructural analysis

    Bigl, S., Wurster, S., Cordill, M. J. & Kiener, D., 22 Mar 2016.

    Research output: Contribution to conference › Presentation › Research

  5. Published

    Revisiting Fatigue Crack Growth in UFG Ni and Fe

    Leitner, T., Hohenwarter, A. & Pippan, R., 22 Mar 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  6. Published

    Residual Stresses and Fracture Toughness in Multi-layered Thin Film Systems

    Konetschnik, R., Kozic, D., Schöngrundner, R., Ganser, H. P., Brunner, R. & Kiener, D., 15 Mar 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  7. E-pub ahead of print

    Low Young's modulus Ti-based porous bulk glassy alloy without cytotoxic elements

    Nicoarǎ, M., Rǎduţǎ, A., Parthiban, R., Locovei, C., Eckert, J. & Stoica, M., 12 Mar 2016, (E-pub ahead of print) In: Acta biomaterialia. 36.2016, May, p. 323-331 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Anodically fabricated TiO2-SnO2 nanotubes and their application in lithium ion batteries

    Madian, M., Klose, M., Jaumann, T., Gebert, A., Oswald, S., Ismail, N., Eychmüller, A., Eckert, J. & Giebeler, L., 9 Mar 2016, In: Journal of Materials Chemistry A. 4.2016, 15, p. 5542-5552 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Corrigendum - Low Voltage Transmission Electron Microscopy of Graphene

    Bachmatiuk, A., Zhao, J., Gorantla, S. M., Martinez, I. G. G., Wiedermann, J., Lee, C., Eckert, J. & Rümmeli, M. H., 9 Mar 2016, In: Small. 12.2016, 10, p. 1251 1 p.

    Research output: Contribution to journal › Comment/debate › peer-review

  10. Published

    Bulk Processing of Nanostructured Advanced Materials

    Eckert, J., 7 Mar 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  11. Published

    In-situ Observation of Cross- Sectional Microstructural Changes and Stress Distributions in Fracturing TiN Thin Film during Nanoindentation

    Zeilinger, A., Todt, J., Krywka, C., Müller, M., Ecker, W., Sartory, B., Meindlhumer, M., Stefenelli, M., Daniel, R., Mitterer, C. & Keckes, J., 7 Mar 2016, In: Scientific reports (London : Nature Publishing Group). 6:22670, p. 1-14 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    In-situ Quasi-Instantaneous e-beam Driven Catalyst-Free Formation of Crystalline Aluminum Borate Nanowires

    Gonzalez-Martinez, I. G., Gemming, T., Mendes, R. G., Bachmatiuk, A., Bezugly, V., Kunstmann, J., Eckert, J., Cuniberti, G. & Rümmeli, M. H., 3 Mar 2016, In: Scientific reports (London : Nature Publishing Group). 2016, 6, 9 p., 22524.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Manipulation of free volumes in a metallic glass through Xe-ion irradiation

    Bian, X., Wang, G., Chen, H., Yan, L., Wang, J., Wang, Q., Hu, P. F., Ren, J. L., Chan, K. C., Zheng, N., Teresiak, A., Gao, Y. L., Zhai, Q. J., Eckert, J., Beadsworth, J., Dahmen, K. A. & Liaw, P. K., 1 Mar 2016, In: Acta materialia. 106.2016, March, p. 66-77 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Wettability and work of adhesion of liquid sulfur on carbon materials for electrical energy storage applications

    Kaban, I., Nowak, R., Bruzda, G., Xi, L., Sobczak, N., Eckert, J. & Giebeler, L., 1 Mar 2016, In: Carbon. 98.2016, March, p. 702-707 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  15. E-pub ahead of print

    Ion milling-induced micrometer-sized heterogeneities and partial crystallization in a TiZrCuFeBe bulk metallic glass

    Zhang, L., Pauly, S., Zhu, Z., Gemming, T., Fu, H., Eckert, J. & Zhang, H., 27 Feb 2016, (E-pub ahead of print) In: Intermetallics. 73.2016, June, p. 5-11 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Investigation of Ni-B Alloys for Joining of TiB2 Ultra-High-Temperature Ceramic

    Xi, L., Kaban, I., Nowak, R., Bruzda, G., Sobczak, N., Stoica, M. & Eckert, J., 19 Feb 2016, In: Journal of Materials Engineering and Performance. 25.2016, 8, p. 3204-3210 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Kinetic analysis of the non-isothermal crystallization process, magnetic and mechanical properties of FeCoBSiNb and FeCoBSiNbCu bulk metallic glasses

    Ramasamy, P., Stoica, M., Taghvaei, A. H., Prashanth, K. G., Kumar, R. & Eckert, J., 19 Feb 2016, In: Journal of applied physics. 119.2016, 7, 073908.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    TiN diffusion barrier failure by the formation of Cu3Si investigated by electron microscopy and atom probe tomography

    Mühlbacher, M., Greczynski, G., Sartory, B., Mendez Martin, F., Schalk, N., Lu, J., Hultman, L. & Mitterer, C., 19 Feb 2016, In: Journal of Vacuum Science and Technology B, JVSTB. 34.2016, 2, p. 1-8 8 p., 022202.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Mechanical properties of pure titanium and a Nb-containing titanium alloy: A comparative study

    Völker, B., Jäger, N., Wurster, S., Hohenwarter, A., Zehetbauer, M. J. & Pippan, R., 18 Feb 2016.

    Research output: Contribution to conference › Presentation › Research

  20. Published

    Small scale deformation behavior of Au – influence of microstructure and temperature

    Maier-Kiener, V., Kiener, D., Leitner, A. & Pippan, R., 18 Feb 2016.

    Research output: Contribution to conference › Presentation › Research

  21. Published

    Revisiting Fatigue Crack Growth in UFG metals

    Leitner, T., Hohenwarter, A. & Pippan, R., 17 Feb 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  22. Published

    In-situ investigation of rate dependent material properties under non-ambient conditions: Challenges, limitations & insights

    Fritz, R., Wimler, D., Leitner, A., Maier-Kiener, V. & Kiener, D., 16 Feb 2016.

    Research output: Contribution to conference › Presentation › Research

  23. Published

    Structural Features and Strain Analysis of Plastically Deformed Bulk Metallic Glasses

    Eckert, J., 16 Feb 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  24. Published

    Towards nanoscale in-situ fatigue and fracture experiments in the TEM

    Imrich, P. & Kiener, D., 16 Feb 2016.

    Research output: Contribution to conference › Presentation › Research

  25. Published

    Bulk Processing of Nanostructured Advanced Materials

    Eckert, J., 15 Feb 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  26. Published

    Microstructural stability of a single-phase nanocrystalline CoCrFeMnNi high-entropy alloy

    Schuh, B., Hohenwarter, A., Maier-Kiener, V., Clemens, H., Völker, B., Mendez Martin, F. & George, E., 15 Feb 2016.

    Research output: Contribution to conference › Presentation › Research

  27. Published

    Plastic deformation in sub-micron dimensions: Insights from advanced in-situ testing techniques

    Kiener, D., 15 Feb 2016.

    Research output: Contribution to conference › Presentation › Research

  28. Published

    Thermally Activated Deformation Processes in Body-Centered Cubic Cr – How Microstructure Influences Strain-Rate Sensitivity

    Maier-Kiener, V., Kiener, D., Pippan, R. & Hohenwarter, A., 15 Feb 2016.

    Research output: Contribution to conference › Presentation › Research

  29. Published

    Microstrucural Investigations of a nanocrystalline CoCrNi alloy

    Schuh, B., Hohenwarter, A., Mendez Martin, F., Völker, B. & Maier-Kiener, V., 6 Feb 2016.

    Research output: Contribution to conference › Poster › Research

  30. Published

    Microstructure and metallic ion release of pure titanium and Ti-13Nb-13Zr alloy processed by high pressure torsion

    Dimić, I., Cvijović-Alagić, I., Völker, B., Hohenwarter, A., Pippan, R., Veljović, D., Rakin, M. & Bugarski, B., 5 Feb 2016, In: Materials & design. 91.2016, 5 February, p. 340-347 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Microstructure and phase formation in Al-20Si-5Fe-3Cu-1Mg synthesized by selective laser melting

    Ma, P., Jia, Y., Prashanth, K. G., Scudino, S., Yu, Z. & Eckert, J., 5 Feb 2016, In: Journal of alloys and compounds. 657.2016, 5 February, p. 430-435 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  32. E-pub ahead of print

    Reconfiguration of lithium sulphur batteries: "Enhancement of Li-S cell performance by employing a highly porous conductive separator coating"

    Stoeck, U., Balach, J., Klose, M., Wadewitz, D., Ahrens, E., Eckert, J. & Giebeler, L., 5 Feb 2016, (E-pub ahead of print) In: Journal of power sources. 309.2016, 31 March, p. 76-81 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Wetting behaviour of Cu-Ga alloys on 304L steel

    Silze, F., Wiehl, G., Kaban, I., Wendrock, H., Gemming, T., Kühn, U., Eckert, J. & Pauly, S., 5 Feb 2016, In: Materials & design. 91.2016, 5 February, p. 11-18 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Ti/Al multi-layered sheets: Accumulative roll bonding (Part A)

    Romberg, J., Freudenberger, J., Bauder, H., Plattner, G., Krug, H., Holländer, F., Scharnweber, J., Eschke, A., Kühn, U., Klauß, H., Oertel, C. G., Skrotzki, W., Eckert, J. & Schultz, L., 2 Feb 2016, In: Metals : open access journal . 6.2016, 2, 14 p., 30.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Ti/Al multi-layered sheets: Differential speed rolling (Part B)

    Romberg, J., Freudenberger, J., Watanabe, H., Scharnweber, J., Eschke, A., Kühn, U., Klauß, H., Oertel, C. G., Skrotzki, W., Eckert, J. & Schultz, L., 2 Feb 2016, In: Metals : open access journal . 6.2016, 2, 15 p., 31.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    A novel high-throughput setup for in situ powder diffraction on coin cell batteries

    Herklotz, M., Weiß, J., Ahrens, E., Yavuz, M., Mereacre, L., Kiziltas-Yavuz, N., Dräger, C., Ehrenberg, H., Eckert, J., Fauth, F., Giebeler, L. & Knapp, M., 1 Feb 2016, In: Journal of applied crystallography. 49.2016, 1, p. 340-345 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Atomic structure and thermal behavior of (Co0.65,Fe0.35)72Ta8B20 metallic glass with excellent soft magnetic properties

    Taghvaei, A. H., Bednarčik, J. & Eckert, J., 1 Feb 2016, In: Intermetallics. 69.2016, February, p. 21-27 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Interfacial interactions between liquid Ti–Al alloys and TiB2 ceramic

    Xi, L., Kaban, I., Nowak, R., Bruzda, G., Sobczak, N. & Eckert, J., 1 Feb 2016, In: Journal of materials science. 51.2016, February, p. 1779-1787 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Preparation of cast-iron-based nanocrystalline alloy with Cu and Nb addition

    Jung, H. Y., Stoica, M., Yi, S., Kim, D. H. & Eckert, J., 1 Feb 2016, In: Intermetallics. 69.2016, February, p. 54-61 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Shear avalanches in plastic deformation of a metallic glass composite

    Tong, X., Wang, G., Yi, J., Ren, J., Pauly, S., Gao, Y.-L., Zhai, Q.-J., Mattern, N., Dahmen, K. A., Liaw, P. K. & Eckert, J., Feb 2016, In: International journal of plasticity. 77.2016, February, p. 141-155 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Ti-based bulk glassy composites obtained by replacement of Ni with Ga

    Rǎduţǎ, A., Nicoarǎ, M., Locovei, C., Eckert, J. & Stoica, M., Feb 2016, In: Intermetallics. 69.2016, February, p. 28-34 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Improved cycling stability of lithium-sulfur batteries using a polypropylene-supported nitrogen-doped mesoporous carbon hybrid separator as polysulfide adsorbent

    Balach, J., Jaumann, T., Klose, M., Oswald, S., Eckert, J. & Giebeler, L., 30 Jan 2016, In: Journal of power sources. 303.2016, 30 January, p. 317-324 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  43. E-pub ahead of print

    Miniaturized fracture experiments to determine the toughness of individual films in a multilayer system

    Konetschnik, R., Kozic, D., Schöngrundner, R., Kolednik, O., Gänser, H.-P., Brunner, R. & Kiener, D., 25 Jan 2016, (E-pub ahead of print) In: Extreme Mechanics Letters. 8.2016, September, p. 235-244 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  44. E-pub ahead of print

    Anisotropic deformation characteristics of an ultrafine- and nanolamellar pearlitic steel

    Kapp, M., Hohenwarter, A., Wurster, S., Yang, B. & Pippan, R., 21 Jan 2016, (E-pub ahead of print) In: Acta materialia. 106.2016, March, p. 239-248 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  45. E-pub ahead of print

    Structure-property relationships in nanoporous metallic glasses

    Şopu, D., Soyarslan, C., Sarac, B., Bargmann, S., Stoica, M. & Eckert, J., 21 Jan 2016, (E-pub ahead of print) In: Acta materialia. 106.2016, March, p. 199-207 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Two-phase quasi-equilibrium in β-type Ti-based bulk metallic glass composites

    Zhang, L., Pauly, S., Tang, M. Q., Eckert, J. & Zhang, H. F., 12 Jan 2016, In: Scientific reports (London : Nature Publishing Group). 6, 19235.

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Microstructure and properties of FeCrMoVC tool steel produced by selective laser melting

    Sander, J., Hufenbach, J. K., Giebeler, L., Wendrock, H., Kühn, U. & Eckert, J., 5 Jan 2016, In: Materials & design. 89.2016, 5 January, p. 335-341 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    CVD growth of 1D and 2D sp2 carbon nanomaterials

    Pang, J., Bachmatiuk, A., Ibrahim, I., Fu, L., Placha, D., Martynkova, G. S., Trzebicka, B., Gemming, T., Eckert, J. & Rümmeli, M. H., 1 Jan 2016, In: Journal of materials science. 51, 2, p. 640-667 28 p.

    Research output: Contribution to journal › Review article › peer-review

  49. Published

    Designing new biocompatible glass-forming Ti75- xZr10NbxSi15 (x = 0, 15) alloys: Corrosion, passivity, and apatite formation

    Abdi, S., Oswald, S., Gostin, P. F., Helth, A., Sort, J., Barõ, M. D., Calin, M., Schultz, L., Eckert, J. & Gebert, A., 1 Jan 2016, In: Journal of Biomedical Materials Research - Part B Applied Biomaterials. 104, 1, p. 27-38 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Structure and properties of sputter deposited crystalline and amorphous Cu-Ti films

    Turnow, H., Wendrock, H., Menzel, S., Gemming, T. & Eckert, J., 1 Jan 2016, In: Thin solid films. 598, p. 184-188 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    33-2: Invited Paper: Evaluating Reliability of Flexible Electronic Materials with Combined Electro-Mechanical Testing Techniques

    Cordill, M., Berger, J. & Jörg, T., 2016, Digest of technical papers / Society for Information Display, SID. (Digest of technical papers / Society for Information Display, SID).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  52. Published

    Advanced characterization methods for wear resistant hard coatings: A review on recent progress

    Tkadletz, M., Schalk, N., Daniel, R., Keckes, J., Czettl, C. & Mitterer, C., 2016, In: Surface & coatings technology. 285, p. 31-46 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    Advanced Characterization of thermo-mechanical fatigue mechanisms for semiconductor metallizations

    Bigl, S., Wurster, S., Schöberl, T., Cordill, M. & Kiener, D., 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  54. Published

    Alloying Behavior of Self-Assembled Noble Metal Nanoparticles

    Kühn, L., Herrmann, A. K., Rutkowski, B., Oezaslan, M., Nachtegaal, M., Klose, M., Giebeler, L., Gaponik, N., Eckert, J., Schmidt, T. J., Czyrska-Filemonowicz, A. & Eychmüller, A., 2016, In: Chemistry : a European journal. 22, 38, p. 13446-13450 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  55. Published

    Al-rich cubic Al0.8Ti0.2N coating with self-organized nano-lamellar microstructure: Thermal and mechanical properties

    Todt, J., Zalesak, J., Daniel, R., Pitonak, R., Köpf, A., Weißenbacher, R., Sartory, B., Mitterer, C. & Keckes, J., 2016, In: Surface & coatings technology. 291, p. 89-93 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  56. Published

    Bruchverhalten von Fe-Si-Al Stählen

    Umgeher, A., 2016

    Research output: Thesis › Doctoral Thesis

  57. Published

    Carbon microparticles from organosolv lignin as filler for conducting Poly(lactic acid)

    Köhnke, J., Fürst, C., Unterweger, C., Rennhofer, H., Lichtenegger, H. C., Keckes, J., Emsenhuber, G., Mahendran, A. R., Liebner, F. & Gindl-Altmutter, W., 2016, In: Cellular polymers. 8, 6

    Research output: Contribution to journal › Article › Research › peer-review

  58. Published

    Combinatorial refinement of thin-film microstructure, properties and process conditions: Iterative nanoscale search for self-assembled TiAlN nanolamellae

    Zalesak, J., Todt, J., Pitonak, R., Köpf, A., Weißenbacher, R., Sartory, B., Burghammer, M., Daniel, R. & Keckes, J., 2016, In: Journal of applied crystallography. 49, 6, p. 2217-2225 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  59. Published

    Contribution of Free Surface and Dislocation Density to the Strength Scaling Behaviour in Ultrafine-grained BCC Chromium

    Fritz, R., Leitner, A., Maier-Kiener, V. & Kiener, D., 2016.

    Research output: Contribution to conference › Presentation › Research

  60. Published

    Cross-sectional stress distribution in AlxGa1-xN heterostructure on Si(111) substrate characterized by ion beam layer removal method and precession electron diffraction

    Reisinger, M., Zalesak, J., Daniel, R., Tomberger, M., Weiss, J. K., Darbal, A. D., Petrenec, M., Zechner, J., Daumiller, I., Ecker, W., Sartory, B. & Keckes, J., 2016, In: Materials and Design. 106, p. 476-481 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  61. Published

    Cross-sectional structure-property relationship in a graded nanocrystalline Ti1-xAlxN thin film

    Zalesak, J., Bartosik, M., Daniel, R., Mitterer, C., Krywka, C., Kiener, D., Mayrhofer, P. H. & Keckes, J., 2016, In: Acta materialia. 102, p. 212-219 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  62. Published

    Cyclic electo-mechanical behavior of ductile films strained with in-situ methods

    Cordill, M., Glushko, O. & Putz, B., 2016.

    Research output: Contribution to conference › Presentation › Research

  63. Published

    Cyclic electro-mechanical behavior of ductile films strained with in-situ methods

    Cordill, M. & Glushko, O., 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  64. Published

    Design of multilayer metallization to reduce mechanical loading: Effect of growth conditions on interface stability and thermo-mechanical properties of sputtered Cu films on Si with and without WTi barrier layers

    Souli, I., Terziyska, V., Keckes, J., Zechner, J. & Mitterer, C., 2016.

    Research output: Contribution to conference › Presentation › Research

  65. Published

    Does dynamic nanoindentation testing influence the acquired mechanical properties?

    Leitner, A., Cordill, M. J., Maier-Kiener, V. & Kiener, D., 2016.

    Research output: Contribution to conference › Presentation › Research

  66. Published

    Dry, hydrophobic microfibrillated cellulose powder obtained in a simple procedure using alkyl ketene dimer

    Yan, Y., Amer, H., Rosenau, T., Zollfrank, C., Dörrstein, J., Jobst, C., Zimmermann, T., Keckes, J., Veigel, S., Gindl-Altmutter, W. & Li, J., 2016, In: Cellulose. 23.2016, 2, p. 1189-1197 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  67. Published

    Dynamic indentation testing: Is there an influence on mechanical properties?

    Leitner, A., Cordill, M. J., Maier-Kiener, V. & Kiener, D., 2016.

    Research output: Contribution to conference › Presentation › Research

  68. Published

    Effect of Cu and Gd on structural and magnetic properties of Fe-Co-B-Si-Nb metallic glasses

    Ramasamy, P., Stoica, M., Calin, M. & Eckert, J., 2016, Advanced Materials and Structures VI. Trans Tech Publications, Vol. 254. p. 60-64 5 p. (Solid State Phenomena; vol. 254).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  69. Published

    Effect of microstructure on electro-mechanical behavior of Cu films on polyimide

    Berger, J., Glushko, O., Marx, V. M., Kirchlechner, C. & Cordill, M., 2016, In: JOM.

    Research output: Contribution to journal › Article › Research › peer-review

  70. Published

    Electro-mechanical based failure criteria for flexible electronics

    Cordill, M., Glushko, O. & Putz, B., 2016.

    Research output: Contribution to conference › Presentation › Research

  71. Published

    Electro-Mechanical Behaviorof Single and Multilayer Metal Thin Films on Polymer Substrates

    Jörg, T., Cordill, M., Franz, R., Kirchlechner, C., Winkler, J. & Mitterer, C., 2016.

    Research output: Contribution to conference › Presentation › Research

  72. Published

    Electro-mechanical performance of thin gold films on polyimide

    Putz, B., Glushko, O. & Cordill, M., 2016, In: MRS Advances. 1, 12, p. 773-778

    Research output: Contribution to journal › Article › Research › peer-review

  73. Published

    Electro-Mechanical testing of conductive materials used in flexible electronics

    Cordill, M., Glushko, O. & Putz, B., 2016, In: Frontiers in Materials. 3, p. 1-11

    Research output: Contribution to journal › Article › Research › peer-review

  74. Published

    Electromigration in gold films on flexible polyimide substrates as a self-healing mechanism

    Putz, B., Glushko, O. & Cordill, M., 2016, In: Materials Research Letters [Elektronische Ressource]. 4, 1, p. 43-47

    Research output: Contribution to journal › Article › Research › peer-review

  75. Published

    Enhanced polysulphide redox reaction using a RuO2 nanoparticle-decorated mesoporous carbon as functional separator coating for advanced lithium-sulphur batteries

    Balach, J., Jaumann, T., Mühlenhoff, S., Eckert, J. & Giebeler, L., 2016, In: Chemical Communications. 52, 52, p. 8134-8137 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  76. Published

    Evolution of structure, stresses and mechanical properties of a fcc/hex-AlCrN multilayer system upon thermal loading revealed by cross-sectional X-ray nanodiffraction and micromechanical testing

    Jäger, N., Klima, S., Hruby, H., Mitterer, C., Keckes, J. & Daniel, R., 2016.

    Research output: Contribution to conference › Poster › Research

  77. Published

    Fabrication of Cu-Al-Ni-Mn Shape-Memory Parts by Selective Laser Melting

    Gustmann, T., Neves, A., Kühn, U., Gargarella, P., Kiminami, C. S., Bolfarini, C., Eckert, J. & Pauly, S., 2016, DDMC 2016.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  78. Published

    Fracture and Delamination of Cu-Nb multilayer films on polyimide

    Cordill, M., Kleinbichler, A., Economy, D. R. & Kennedy, M. S., 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  79. Published

    Fracture and Material Behavior of Thin Film composites

    Kozic, D., Konetschnik, R., Maier-Kiener, V., Schöngrundner, R., Brunner, R., Kiener, D., Antretter, T. & Gänser, H.-P., 2016, 2016 17th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE) . Institute of Electrical and Electronics Engineers, p. 1-6 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  80. Published

    Fracture of Severely Plastically Deformed Metals

    Hohenwarter, A., Pippan, R., Völker, B., Kapp, M. W., Kammerhofer, C. & Leitner, T., 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  81. Published

    Fracture of Severely Plastically Deformed Niobium and Tantalum

    Hohenwarter, A., 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  82. Published

    Fracture of ultrafine-grained and nanocrystalline materials

    Hohenwarter, A., Völker, B., Leitner, T. & Kapp, M. W., 2016.

    Research output: Contribution to conference › Presentation › Research

  83. Published

    High resolution determination of local residual stress gradients in single- and multilayer thin film systems

    Treml, R., Kozic, D., Zechner, J., Maeder, X., Gänser, H.-P., Schöngrundner, R., Michler, J., Brunner, R. & Kiener, D., 2016, In: Acta materialia. 103, p. 616-623

    Research output: Contribution to journal › Article › Research › peer-review

  84. Published

    Influence of Annealing Treatments on the Adhesion Metal Barrier Layers

    Kleinbichler, A., Zechner, J. & Cordill, M., 2016.

    Research output: Contribution to conference › Poster › Research › peer-review

  85. Published

    Influence of Annealing Treatments on the Adhesion Metal Barrier Layers

    Kleinbichler, A., Zechner, J. & Cordill, M., 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  86. Published

    Influence of extreme thermal cycling on metal polymer interfaces

    Putz, B., Butenko, Y., Milassin, G., Semprimoschnig, C. & Cordill, M., 2016.

    Research output: Contribution to conference › Poster › Research

  87. Published

    Influence of extreme thermal cycling on metal polymer interfaces for space applications

    Putz, B., Cordill, M., Milassin, G., Butenko, Y. & Semprimoschnig, C., 2016.

    Research output: Contribution to conference › Presentation › Research

  88. Published

    Influence of extreme thermal cycling on metal polymer interfaces for space applications

    Putz, B., Milassin, G., Butenko, Y., Semprimoschnig, C. & Cordill, M., 2016.

    Research output: Contribution to conference › Poster › Research

  89. Published

    Influence of Free Surface on the Deformation Behaviour of ufg Chromium at Ambient & Elevated Temperatures

    Fritz, R., Leitner, A., Maier-Kiener, V. & Kiener, D., 2016.

    Research output: Contribution to conference › Presentation › Research

  90. Published

    In-situ electro-mechanical fragmentation testing with synchrotron radiation

    Putz, B., Glushko, O., Marx, V., Kirchlechner, C., Többens, D. & Cordill, M., 2016, In: MRS Advances. 1, 12

    Research output: Contribution to journal › Article › Research › peer-review

  91. Published

    In-situ electro-mechanical fragmentation testing with synchrotron radiation

    Putz, B., Glushko, O., Kirchlechner, C. & Cordill, M., 2016.

    Research output: Contribution to conference › Presentation › Research

  92. Published

    In-situ methods to study electro-mechanical behavior of flexible electronic materials

    Cordill, M., 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  93. Published

    In-situ Methods to Study the Electro-Mechanical Properties of Mo Thin Films on Polymer Substrates

    Jörg, T., Cordill, M., Franz, R., Glushko, O., Winkler, J. & Mitterer, C., 2016.

    Research output: Contribution to conference › Presentation › Research

  94. Published

    Integrated experimental and computational approach for residual stress investigation near through-silicon vias

    Deluca, M., Hammer, R., Keckes, J., Kraft, J., Schrank, F., Todt, J., Robach, O., Micha, J. S. & Defregger, S., 2016, In: Journal of applied physics. 120, 19

    Research output: Contribution to journal › Article › Research › peer-review

  95. Published

    Interface controlled microstructure evolution in nanolayered thin films

    Bartosik, M., Keckes, J., Persson, P. O. Å., Riedl, H. & Mayrhofer, P. H., 2016, In: Scripta materialia. 123, p. 13-16 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  96. Published

    Interface dominated mechanical properties of ultra-fine grained and nanoporous Au at elevated temperatures

    Leitner, A., Maier-Kiener, V., Jeong, J., Abad, M. D., Hosemann, P., Oh, S. H. & Kiener, D., 2016, In: Acta materialia. 121.2016, December, p. 104-116 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  97. Published

    Lignocellulose Nanofiber-Reinforced Polystyrene Produced from Composite Microspheres Obtained in Suspension Polymerization Shows Superior Mechanical Performance

    Ballner, D., Herzele, S., Keckes, J., Edler, M., Griesser, T., Saake, B., Liebner, F., Potthast, A., Paulik, C. & Gindl-Altmutter, W., 2016, In: ACS Applied Materials & Interfaces. 8, 21, p. 13520-13525 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  98. Published

    MACRO- and MICROSCOPIC Properties of Gradient Ultra-High-Strength seamless Steel Tubes Produced by dedicated thermo-mechanical treatments

    Winter, G., Klarner, J., Buchmayr, B. & Keckes, J., 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  99. Published

    Mechanical Adhesion Testing Techniques for Metal Dielectric Interfaces

    Kleinbichler, A., Zechner, J. & Cordill, M., 2016.

    Research output: Contribution to conference › Poster › Research › peer-review

  100. Published

    Mechanical Behavior of Cu-Nb Multilayer Films Evaluated with In-situ Fragmentation Methods

    Cordill, M., Kleinbichler, A., Economy, D. R. & Kennedy, M. S., 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  101. Published

    Mechanical properties of severely plastically deformed niobium and tantalum

    Hohenwarter, A., 2016.

    Research output: Contribution to conference › Presentation › Research

Previous 1...6 7 8 9 10 11 12 13 ...20 Next
View graph of relations

Contact information

Jahnstrasse 12/I, 8700 Leoben
  • Main phone number: +43 3842 804 112