The influence of a brittle Cr interlayer on the Deformation behavior of thin Cu films on flexible substrates: Experiment and Model

Marx, V. M., Toth, F., Wiesinger, A., Berger, J., Kirchlechner, C., Cordill, M., Fischer, F. D., Rammerstorfer, F. G. & Dehm, G., 2015, In: Acta materialia. 89, p. 278-289

Research output: Contribution to journal › Article › Research › peer-review

Thermal expansion of rock-salt cubic AlN

Bartosik, M., Todt, M., Holec, D., Todt, J., Zhou, L., Riedl, H., Böhm, H. J., Rammerstorfer, F. G. & Mayerhofer, P. H., 2015, In: Applied physics letters. 107, p. 071602-1 - 071602-5

Research output: Contribution to journal › Article › Research › peer-review

X-ray nanodiffraction reveals stress distribution across an indented multilayered CrN-Cr thin film

Steffenelli, M., Daniel, R., Ecker, W., Kiener, D., Todt, J., Zeilinger, A., Mitterer, C., Burghammer, M. & Keckes, J., 2015, In: Acta materialia. 85, p. 24-31

Research output: Contribution to journal › Article › Research › peer-review

Young's Modulus and Poisson's Ratio Characterization of Tungsten Thin Films via Laser Ultrasound

Grünwald, E., Nuster, R., Treml, R., Kiener, D., Paltauf, G. & Brunner, R., 2015, In: Materials Today: Proceedings. 2, p. 4289-4294

Research output: Contribution to journal › Article › Research › peer-review

Elastostatic reversibility in thermally formed bulk metallic glasses: Nanobeam diffraction fluctuation electron microscopy

Sarac, B., Gammer, C., Deng, L., Park, E., Yokoyama, Y., Stoica, M. & Eckert, J., 4 Dec 2014, In: Nanoscale. 10.2018, 3, p. 1081-1089 9 p.

Research output: Contribution to journal › Article › Research › peer-review

Extreme ductility at the nanoscale in Fe-based alloys

Hintsala, E., Kiener, D. & Gerberich, W. W., 1 Aug 2014, In: Microscopy and microanalysis. 20, 3, p. 1876-1877 2 p.

Research output: Contribution to journal › Article › Research › peer-review

Plastic Flow of a Cu₅₀Zr₄₅Ti₅ Bulk Metallic Glass Composite

Wang, G., Pauly, S., Gorantla, S., Mattern, N. & Eckert, J., Jun 2014, In: Journal of Materials Science and Technology. 30, 6, p. 609-615 7 p.

Research output: Contribution to journal › Article › Research › peer-review

Mono-textured nanocrystalline thin films with pronounced stress-gradients: On the role of grain boundaries in the stress evolution

Daniel, R., Jäger, E., Todt, J., Sartory, B., Mitterer, C. & Keckes, J., 28 May 2014, In: Journal of applied physics. 115, 20, 203507.

Research output: Contribution to journal › Article › Research › peer-review

Grain boundary excess volume and defect annealing of copper after high-pressure torsion

Oberdorfer, B., Setman, D., Steyskal, E. M., Hohenwarter, A., Sprengel, W., Zehetbauer, M., Pippan, R. & Würschum, R., 15 Apr 2014, In: Acta materialia. 68, p. 189-195 7 p.

Research output: Contribution to journal › Article › Research › peer-review

Deformation behavior of Cu-composites processed by HPT

Krämer, L., Wurster, S. & Pippan, R., 1 Jan 2014, In: IOP Conference Series: Materials Science and Engineering. 63, 1, 012026.

Research output: Contribution to journal › Article › Research › peer-review

Enhanced toughness and stable crack propagation in a novel tungsten fibre-reinforced tungsten composite produced by chemical vapour infiltration

Riesch, J., Höschen, T., Linsmeier, C., Wurster, S. & You, J. H., 1 Jan 2014, In: Physica scripta. T159, 014031.

Research output: Contribution to journal › Article › Research › peer-review

Statistical quantification of the impact of surface preparation on yield point phenomena in nickel

Lawrence, S. K., Zbib, H. M., Cordill, M. J., Wurster, S. & Bahr, D. F., 1 Jan 2014, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 45, 10, p. 4307-4315 9 p.

Research output: Contribution to journal › Article › Research › peer-review

3D morphology of fracture surfaces created by mixed-mode II+III fatigue loading in metallic materials

Vojtek, T., Pokluda, J., Hohenwarter, A., Slamecka, K. & Pippan, R., 2014, In: Procedia Engineering. p. 74-77

Research output: Contribution to journal › Article › Research › peer-review

A combinatorial X-ray sub-micron diffraction study of microstructure, residual stress and phase stability in TiAlN coatings

Riedl, A., Daniel, R., Todt, J., Steffenelli, M., Holec, D., Sartory, B., Krywka, C., Müller, M., Mitterer, C. & Keckes, J., 2014, In: Surface & coatings technology. 257, p. 108-113

Research output: Contribution to journal › Article › Research › peer-review

A fracture resistant high-entropy alloy for cryogenic applications

Gludovatz, B., Hohenwarter, A., Catoor, D., Chang, E. H., George, E. P. & Ritchie, R. O., 2014, In: Science. 345, p. 1153-1158

Research output: Contribution to journal › Article › Research › peer-review

A new method for polychromatic X-ray μLaue diffraction on a Cu pillar using an energy-dispersive pn-junction charge-coupled device

Abboud, A., Kirchlechner, C., Send, S., Micha, J. S., Ulrich, O., Pashniak, N., Strüder, L. W. J., Keckes, J. & Pietsch, U., 2014, In: Review of scientific instruments. 85, p. 1139011-1139018

Research output: Contribution to journal › Article › Research › peer-review

A New View on J-Integrals in Elastic-Plastic Materials

Kolednik, O., Schöngrundner, R. & Fischer, F. D., 2014, In: International Journal of Fracture. 187, p. 77-107

Research output: Contribution to journal › Article › Research › peer-review

A novel laboratory test rig for probing the sensitivity of rail steels to RCF and wear - first experimental results

Kammerhofer, C., Hohenwarter, A. & Pippan, R., 2014, In: Wear. 316, p. 101-108

Research output: Contribution to journal › Article › Research › peer-review

Critical assessment of the determination of residual stress profiles in thin films by means of the ion beam layer removal method

Schöngrundner, R., Treml, R., Antretter, T., Kozic, D., Ecker, W. & Kiener, D., 2014, In: Thin solid films. p. 321-330

Research output: Contribution to journal › Article › Research › peer-review

Differences in deformation behavior of bicrystalline Cu micropillars containing a twin boundary or a large-angle grain boundary

Imrich, P., Kirchlechner, C., Motz, C. & Dehm, G., 2014, In: Acta materialia. 73, p. 240-250

Research output: Contribution to journal › Article › Research › peer-review

Ductile film delamination from compliant substrates using hard overlayers

Cordill, M. J., Marx, V. M. & Kirchlechner, C., 2014, In: Thin solid films. 571, p. 302-307

Research output: Contribution to journal › Article › Research › peer-review

Eine Legierung aus fünf Metallen

Hohenwarter, A., 2014, In: Die Presse. p. x-x

Research output: Contribution to journal › Article › Research › peer-review

Fatigue crack growth behavior of ultrafine-grained nickel produced by high pressure torsion

Leitner, T., Hohenwarter, A. & Pippan, R., 2014, In: Procedia Materials Science. 3, p. 1044-1049

Research output: Contribution to journal › Article › Research › peer-review

Fracture and R-curve behavior of an intermetallic β-stabilized TiAl alloy with different nearly lamellar microstructures

Leitner, T., Schloffer, M., Mayer, S., Eßlinger, J., Clemens, H. & Pippan, R., 2014, In: Intermetallics. 53, p. 1-9

Research output: Contribution to journal › Article › Research › peer-review

Grain boundary excess volume and defect annelaing of copper after high pressure torsion

Oberdorfer, B., Setman, D., Steyskal, E.-M., Hohenwarter, A., Sprengel, W., Zehetbauer, M., Pippan, R. & Würschum, R., 2014, In: Acta materialia. 68, p. 189-195

Research output: Contribution to journal › Article › Research › peer-review

Growth mechanism of Al2Cu precipitates during in situ TEM heating of a HPT deformed Al-3wt.%Cu alloy

Rashkova, B., Faller, M., Pippan, R. & Dehm, G., 2014, In: Journal of alloys and compounds. 600, p. 43-50

Research output: Contribution to journal › Article › Research › peer-review

Humidity-driven deformation of ordered mesoporous silica films

Sharifi Rajabi, P., Marmiroli, B., Sartori, B., Cacho-Nerin, F., Keckes, J., Amenitsch, H. & Paris, O., 2014, In: Bioinspired, Biomimetic and Nanobiomaterials. 3, p. 183-190

Research output: Contribution to journal › Article › Research › peer-review

Improvements of Strength and Fracture Restistance by Spatial Material Property Variations

Kolednik, O., Predan, J., Fischer, F. D. & Fratzl, P., 2014, In: Acta materialia. 68, p. 279-294

Research output: Contribution to journal › Article › Research › peer-review

Impurity effects on the nucleation and growth of primary Al3(Sc,Zr) phase in Al alloys

Li, J., Oberdorfer, B., Wurster, S. & Schumacher, P., 2014, In: Journal of materials science. 49, p. 5961-5977

Research output: Contribution to journal › Article › Research › peer-review

Influence of heat treatment on the microstructural evolution of Al-3 wt.% Cu during high-pressure torsion

Hohenwarter, A., Faller, M., Rashkova, B. & Pippan, R., 2014, In: Philosophical magazine : Letters. 94, p. 342-350

Research output: Contribution to journal › Article › Research › peer-review

Influence of metastable retained austenite on macro and micromechanical properties of steel processed by the Q&P process

Jirková, H., Masek, B., Wagner, M.F.-X., Langmajerová, D., Kucerová, L., Treml, R. & Kiener, D., 2014, In: Journal of alloys and compounds. 615, p. S163-S168

Research output: Contribution to journal › Article › Research › peer-review

Investigation of the origin of compressive residual stress in CVD TiB2 hard coatings using synchrotron X-ray nanodiffraction

Schalk, N., Keckes, J., Czettl, C., Burghammer, M., Penoy, M., Michotte, C. & Mitterer, C., 2014, In: Surface & coatings technology. 258, p. 121-126

Research output: Contribution to journal › Article › Research › peer-review

Macroscopic elastic properties of textured ZrN-AlN polycrystalline aggregates: From ab initio calculations to grain-scale interactions

Holec, D., Tasnádi, F., Wagner, P., Friak, M., Neugebauer, J., Mayrhofer, P. H. & Keckes, J., 2014, In: Physical review : B, Condensed matter and materials physics. 90, p. 184106-1-184106-9

Research output: Contribution to journal › Article › Research › peer-review

Microstructural evolution of a focused ion beam fabricated Mg nanopillar at high temperatures: Defect annihilation and sublimation

Jeong, J., Lee, S., Kim, Y., Han, S. M., Kiener, D., Youn-Bae, K. & Oh, S. H., 2014, In: Scripta materialia. 86, p. 44-47

Research output: Contribution to journal › Article › Research › peer-review

Multicomponent materials from machining chips compacted by equal-channel angular pressing

Lapovok, R., Qi, Y., Ng, H. P., Maier, V. & Estrin, Y., 2014, In: Journal of materials science. 49, p. 1193-1204

Research output: Contribution to journal › Article › Research › peer-review

Near-threshold behaviour of shear-mode fatigue cracks in metallic materials

Pokluda, J., Pippan, R., Vojtek, T. & Hohenwarter, A., 2014, In: Fatigue & fracture of engineering materials & structures : Fatigue and fracture of engineering materials and structures. 37, p. 232-254

Research output: Contribution to journal › Article › Research › peer-review

New insights into single-grain mechanical behavior from temperature-dependent 3-D coherent X-ray diffraction

Vaxelaire, N., Labat, S., Cornelius, T., Kirchlechner, C., Keckes, J., Schülli, T. & Thomas, O., 2014, In: Acta materialia. 78, p. 46-55

Research output: Contribution to journal › Article › Research › peer-review

On Problems with the Determination of the Fracture Resistance for Materials with Spatial Variations of the Young's Modulus

Fischer, F. D., Predan, J., Müller, R. & Kolednik, O., 2014, In: International Journal of Fracture. 190, p. 23-38

Research output: Contribution to journal › Article › Research › peer-review

Radial crystalline texture in a lyocell fibre revealed by synchrotron nanofocus wide-angle X-ray scattering

Gindl-Altmutter, W., Eichhorn, S. J., Burghammer, M. C. & Keckes, J., 2014, In: Cellulose. p. 845-851

Research output: Contribution to journal › Article › Research › peer-review

Recovery of electrical resistance in copper films on polyethylene terephthalate subjected to a tensile strain

Glushko, O., Marx, V. M., Kirchlechner, C., Zizak, I. & Cordill, M. J., 2014, In: Thin solid films. 552, p. 141-145

Research output: Contribution to journal › Article › Research › peer-review

Reversible cyclic deformation mechanism of gold nanowires by twinning–detwinning transition evidenced from in situ TEM

Lee, S., Im, J., Yoo, Y., Bitzek, E., Kiener, D., Richter, G., Kim, B. & Oh, S. H., 2014, In: Nature Communications. 5, p. 1-10

Research output: Contribution to journal › Article › Research › peer-review

Sample tilt-free characterization of residual stress gradients in thin coatings using an in-plane arm-equipped laboratory X-ray diffractometer

Benediktovitch, A. I., Ulyanenkova, T., Keckes, J. & Ulyanenkov, A. P., 2014, In: Journal of applied crystallography. p. 1931-938

Research output: Contribution to journal › Article › Research › peer-review

Sputtered molybdenum films: structure and property evolution with film thickness

Hofer, A. M., Schlacher, J., Keckes, J., Winkler, J. & Mitterer, C., 2014, In: Vacuum. 99, p. 149-152

Research output: Contribution to journal › Article › Research › peer-review

Superior oxidation resistance, mechanical properties and residual stresses of an Al-rich nanolamellar Ti0.05Al0.95N coating prepared by CVD

Todt, J., Pitonak, R., Köpf, A., Weißenbacher, R., Sartory, B., Burghammer, M., Daniel, R., Schöberl, T. & Keckes, J., 2014, In: Surface & coatings technology. 258.2014, November, p. 1119-1127

Research output: Contribution to journal › Article › Research › peer-review

The Strengthening Effect of Phase Boundaries in a Severely Plastically Deformed Ti-Al Composite Wire

Marr, T., Maier, V., Freudenberger, J., Höppel, H. W., Göken, M. & Schultz, L., 2014, In: Metals : open access journal . 4, p. 37-54

Research output: Contribution to journal › Article › Research › peer-review

Fertigung von Elektronik in Europa im Brennpunkt

Kiener, D., 24 May 2013, In: Kleine Zeitung / Steiermark - Leoben und rund um den Erzberg.

Research output: Contribution to journal › Article › Transfer

A brief summary of the progress on the EFDA tungsten materials program

Rieth, M., Dudarev, S. L., Gonzalez De Vicente, S. M., Aktaa, J., Ahlgren, T., Antusch, S., Armstrong, D. E. J., Balden, M., Baluc, N., Barthe, M. F., Basuki, W. W., Battabyal, M., Becquart, C. S., Blagoeva, D., Boldyryeva, H., Brinkmann, J., Celino, M., Ciupinski, L., Correia, J. B. & De Backer, A. & 51 others, Domain, C., Gaganidze, E., Garcia-Rosales, C., Gibson, J., Gilbert, M. R., Giusepponi, S., Gludovatz, B., Greuner, H., Heinola, K., Höschen, T., Hoffmann, A., Holstein, N., Koch, F., Krauss, W., Li, H., Lindig, S., Linke, J., Linsmeier, C., Lopez-Ruiz, P., Maier, H., Matejicek, J., Mishra, T. P., Muhammed, M., Munoz, A., Muzyk, M., Nordlund, K., Nguyen-Manh, D., Opschoor, J., Ordas, N., Palacios, T., Pintsuk, G., Pippan, R., Reiser, J., Riesch, J., Roberts, S. G., Romaner, L., Rosiński, M., Sanchez, M., Schulmeyer, W., Traxler, H., Urena, A., Van Der Laan, J. G., Veleva, L., Wahlberg, S., Walter, M., Weber, T., Weitkamp, T., Wurster, S., Yar, M. A., You, J. H. & Zivelonghi, A., 18 Apr 2013, In: Journal of nuclear materials. 442, 1-3 SUPPL.1

Research output: Contribution to journal › Article › Research › peer-review

Activation Parameters for Deformation of Ultrafine-Grained Aluminium as Determined by Indentation Strain Rate Jumps at Elevated Temperature

Wheeler, J. M., Maier, V., Durst, K., Göken, M. & Michler, J., 2013, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 585, p. 108-113

Research output: Contribution to journal › Article › Research › peer-review