Chair of Functional Materials and Materials Systems (425)

Organisational unit: Chair

251 - 300 out of 682Page size: 50

Research output

  1. 2020
  2. Published

    Thermo-physical properties of coatings in the Ti(B,N) system grown by chemical vapor deposition

    Kainz, C., Schalk, N., Tkadletz, M., Saringer, C., Winkler, M., Stark, A., Schell, N., Julin, J. & Czettl, C., 25 Feb 2020, In: Surface & coatings technology. 384.2020, 25 February, 9 p., 125318.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Erosion and cathodic arc plasma of Nb–Al cathodes: composite versus intermetallic

    Zöhrer, S., Golizadeh Najafabadi, M., Koutná, N., Holec, D., Anders, A. & Franz, R., 20 Feb 2020, In: Plasma sources science & technology. 29.2020, 2, 14 p., 025022.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Microstructural evolution and thermal stability of AlCr(Si)N hard coatings revealed by in-situ high-temperature high-energy grazing incidence transmission X-ray diffraction

    Jäger, N., Meindlhumer, M., Spor, S., Hruby, H., Julin, J., Stark, A., Nahif, F., Keckes, J., Mitterer, C. & Daniel, R., 18 Jan 2020, In: Acta materialia. 186.2020, March, p. 545-554 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  5. E-pub ahead of print

    Angular-dependent deposition of MoNbTaVW HEA thin films by three different physical vapor deposition methods

    Xia, A., Togni, A., Hirn, S., Bolelli, G., Lusvarghi, L. & Franz, R., 17 Jan 2020, (E-pub ahead of print) In: Surface & coatings technology. 385.2020, March, 8 p., 125356.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Molecular Coverage Determines Sliding Wear Behavior of n-Octadecylphosphonic Acid Functionalized Cu–O Coated Steel Disks against Aluminum

    Prünte, S., Music, D., Terziyska, V., Mitterer, C. & Schneider, J. M., 1 Jan 2020, In: Materials. 13.2020, 2, 10 p., 280.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Stress relaxation through thermal crack formation in CVD TiCN coatings grown on WC-Co with different Co contents

    Stylianou, R. P., Velic, D., Daves, W., Ecker, W., Stark, A., Schell, N., Tkadletz, M., Schalk, N., Czettl, C. & Mitterer, C., Jan 2020, In: International journal of refractory metals & hard materials. 86.2020, January, 9 p., 105102.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Angular resolved mass-energy analysis of species emitted from a dc magnetron sputtered NiW-target

    Rausch, M., Mraz, S., Kreiml, P., Cordill, M. J., Schneider, J. M., Winkler, J. & Mitterer, C., 2020, In: Journal of vacuum science & technology / A (JVST). 38.2020, 2, p. 1-10 023401.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Arc evaporated CrTa(B)N hard coatings for cutting tools

    Gruber, G., 2020

    Research output: Thesis › Master's Thesis

  10. Published

    Balancing the electro-mechanical and interfacial performance of Mo-based alloy films

    Kreiml, P., Rausch, M., Terziyska, V., Köstenbauer, H., Winkler, J., Mitterer, C. & Cordill, M., 2020, In: Materialia. 12.2020, August, 7 p., 100774.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Chemical Vapor Deposition of Hard Coatings in the System Ti-B-C-N

    Kainz, C., 2020

    Research output: Thesis › Doctoral Thesis

  12. Published

    Cross-sectional and High-Temperature Structure-Property Relationships in Nanocrystalline Thin Films

    Meindlhumer, M., 2020

    Research output: Thesis › Doctoral Thesis

  13. Published

    CVD TiCN/α-Al2O3 coated cemented carbide cutting tools

    Stylianou, R. P., 2020

    Research output: Thesis › Doctoral Thesis

  14. Published

    Development and Characterisation of 3D-Stacks with Porous Metal Layers

    Krainer, R., 2020

    Research output: Thesis › Master's Thesis

  15. Published

    Influence of polyimide substrate on electromechanical properties of sputter-deposited Mo and Cu thin films

    Haiden, L., 2020

    Research output: Thesis › Master's Thesis

  16. Published

    Sputter deposited SnOx films for gas sensors

    Preindl, M., 2020

    Research output: Thesis › Master's Thesis

  17. Published

    Sputtered MoAlTi thin films with improved oxidation behavior for display applications

    Lorenz, R., Jörg, T., Mitterer, C., O'Sullivan, M. & Winkler, J., 2020, In: SVC Bulletin. 2020, Spring, p. 47-53 7 p.

    Research output: Contribution to journal › Article › Research

  18. Published

    Synthesis and characterization of novel carbon-based nanoporous materials for energy storage applications

    Natter, N. R., 2020

    Research output: Thesis › Master's Thesis

  19. Published

    Synthesis, Structure and Properties of MoNbTaVW High Entropy Alloy Thin Films

    Xia, A., 2020

    Research output: Thesis › Doctoral Thesis

  20. 2019
  21. Published

    Stress-controlled decomposition routes in cubic AlCrN films assessed by in-situ high-temperature high-energy grazing incidence transmission X-ray diffraction

    Meindlhumer, M., Klima, S., Jäger, N., Stark, A., Hruby, H., Mitterer, C., Keckes, J. & Daniel, R., 2 Dec 2019, In: Scientific reports (London : Nature Publishing Group). 2019, 9, 14 p., 18027.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    The effect of B and C addition on microstructure and mechanical properties of TiN hard coatings grown by chemical vapor deposition

    Kainz, C., Schalk, N., Tkadletz, M., Mitterer, C. & Czettl, C., 31 Oct 2019, In: Thin solid films. 688.2019, 137283, 8 p., 137283.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Thermal expansion of magnetron sputtered TiCxN1-x coatings studied by high-temperature X-ray diffraction

    Saringer, C., Kickinger, C., Munnik, F., Mitterer, C., Schalk, N. & Tkadletz, M., 31 Oct 2019, In: Thin solid films. 688.2019, 31 October, 8 p., 137307.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Correlation of mechanical damage and electrical behavior of Al/Mo bilayers subjected to bending

    Kreiml, P., Rausch, M., Terziyska, V. L., Köstenbauer, H., Winkler, J., Mitterer, C. & Cordill, M. J., 1 Oct 2019, In: Thin solid films. 687.2019, 1 October, 9 p., 137480.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Cross-sectional gradients of residual stresses, microstructure and phases in a nitrided steel revealed by 20 µm synchrotron X-ray diffraction

    Bodner, S. C., Ziegelwanger, T., Meindlhumer, M., Holcova, J., Todt, J., Schell, N. & Keckes, J., Oct 2019, In: Metallurgia Italiana. 2019, 10, p. 7-11 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Microstructure and mechanical properties of CVD TiN/TiBN multilayer coatings

    Kainz, C., Schalk, N., Tkadletz, M., Mitterer, C. & Czettl, C., 25 Jul 2019, In: Surface & coatings technology. 370.2019, July, p. 311-319 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Nanostructured Fe-Ni Sulfide : A Multifunctional Material for Energy Generation and Storage

    Zhao, C., Zhang, C., Bhoyate, S., Kahol, P. K., Kostoglou, N., Mitterer, C., Hinder, S. J., Baker, M., Constantinides, G., Polychronopoulou, K., Rebholz, C. & Gupta, R. K., 11 Jul 2019, In: Catalysts : open access journal. 9.2019, 7, 12 p., 597.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Exceptional fracture resistance of ultrathin metallic glass films due to an intrinsic size effect

    Glushko, O., Mühlbacher, M., Gammer, C., Cordill, M. J., Mitterer, C. & Eckert, J., 4 Jun 2019, In: Scientific reports. 9, 1, p. 1-9 9 p., 8281.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    In-situ investigation of the oxidation behavior of metastable CVD Ti1-xAlxN using a novel combination of synchrotron radiation XRD and DSC

    Saringer, C., Tkadletz, M., Stark, A., Schell, N., Czettl, C. & Schalk, N., 27 May 2019, In: Surface & coatings technology. 374.2019, 25 September, p. 617-624 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Correlating high temperature mechanical and tribological properties of CrAlN and CrAlSiN hard coatings

    Drnovšek, A., Vo, H., Xia, A., Vachhani, S. J., Kolozsvári, S., Hosemann, P., Franz, R. & Rebelo de Figueiredo, M., 17 May 2019, In: Surface & coatings technology. 372.2019, August, p. 361-368 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Structure-stress relationships in nanocrystalline multilayered Al0.7Cr0.3N/Al0.9Cr0.1N coatings studied by cross-sectional X-ray nanodiffraction

    Klima, S., Jäger, N., Hruby, H., Mitterer, C., Keckes, J., Burghammer, M. & Daniel, R., 15 May 2019, In: Materials and Design. 170, p. 1-9 107702.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Arc-produced short-length multi-walled carbon nanotubes as “millstones” for the preparation of graphene-like nanoplatelets

    Kostoglou, N., Ryzhkov, V., Walters, I., Doumanidis, C. C., Rebholz, C. & Mitterer, C., May 2019, In: Carbon. 146.2019, May, p. 779-784 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Thermal stability of immiscible sputter-deposited Cu-Mo thin films

    Souli, I., Gruber, G., Terziyska, V., Zechner, J. & Mitterer, C., 30 Apr 2019, In: Journal of alloys and compounds. 793.2019, April, p. 208-218 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Biomimetic hard and tough nanoceramic Ti–Al–N film with self-assembled six-level hierarchy

    Meindlhumer, M., Zalesak, J., Pitonak, R., Todt, J., Sartory, B., Burghammer, M., Stark, A., Schell, N., Daniel, R., Keckes, J., Lessiak, M., Köpf, A., Weißenbacher, R. & Keckes, J., 28 Apr 2019, In: Nanoscale. 11.2019, 16, p. 7986-7995 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Experimental Chemistry and Structural Stability of AlNb3 Enabled by Antisite Defects Formation

    Koutná, N., Erdely, P., Zöhrer, S., Franz, R., Du, Y., Liu, S., Mayrhofer, P. H. & Holec, D., 3 Apr 2019, In: Materials. 12.2019, 7, p. 1-11 11 p., 1104.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Plasma-Derived Graphene-Based Materials for Water Purification and Energy Storage

    Natter, N., Kostoglou, N., Koczwara, C., Tampaxis, C., Steriotis, T., Gupta, R. K., Paris, O., Rebholz, C. & Mitterer, C., 3 Apr 2019, In: C – journal of carbon research. 5.2019, 2, 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Gradients of microstructure, stresses and mechanical properties in a multi-layered diamond thin film revealed by correlative cross-sectional nano-analytics

    Gruber, D., Todt, J., Wöhrl, N., Zalesak, J., Tkadletz, M., Kubec, A., Niese, S., Burghammer, M., Rosenthal, M., Sternschulte, H., Pfeifenberger, M. J., Sartory, B. & Keckes, J., 1 Apr 2019, In: Carbon. 144.2019, April, p. 666-674 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Compressive and tensile bending of sputter deposited Al/Mo bilayers

    Kreiml, P., Rausch, M., Terziyska, V., Winkler, J., Mitterer, C. & Cordill, M., 15 Mar 2019, In: Scripta materialia. 162.2019, March, p. 367-371 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Effects of reference materials on texture coefficients determined for a CVD α-Al2O3 coating

    Stylianou, R. P., Tkadletz, M., Schalk, N., Penoy, M., Czettl, C. & Mitterer, C., 15 Feb 2019, In: Surface & coatings technology. 359.2019, February, p. 314-322 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Crack deflecting microstructure for improved electro-mechanical lifetimes of flexible systems

    Cordill, M. J., Jörg, T., Glushko, O., Franz, R. & Mitterer, C., 13 Feb 2019, In: Materials letters. 244.2019, 1 June, p. 47-49 3 p.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Electrodeposited Nanostructured CoFe2O4 for OverallWater Splitting and Supercapacitor Applications

    Zhang, C., Bhoyate, S., Zhao, C., Kahol, P. K., Kostoglou, N., Mitterer, C., Hinder, S. J., Baker, M., Constantinides, G., Polychronopoulou, K., Rebholz, C. & Gupta, R. K., 13 Feb 2019, In: Catalysts : open access journal. 9.2019, 2, p. 1-11 11 p., 176.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Oxidation and wet-etching behavior of MoAlTi thin films deposited by sputtering from a rotatable MoAlTi compound target

    Lorenz, R., O`Sullivan, M., Sprenger, D., Lang, B., Köstenbauer, H., Winkler, J. & Mitterer, C., 5 Feb 2019, In: Journal of vacuum science & technology / B (JVST). 37.2019, 2, 021202.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Thermal crack network on CVD TiCN/α-Al2O3 coated cemented carbide cutting tools

    Gassner, M., Schalk, N., Tkadletz, M., Czettl, C. & Mitterer, C., 5 Feb 2019, In: International journal of refractory metals & hard materials. 81.2019, June, p. 1-6 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Antibacterial Silicon Oxide Thin Films Doped with Zinc and Copper Grown by Atmospheric Pressure Plasma Chemical Vapor Deposition

    Jäger, E., Schmidt, J., Pfuch, A., Spange, S., Beier, O., Jäger, N., Jantschner, O., Daniel, R. & Mitterer, C., Feb 2019, In: Nanomaterials. 9.2019, 2, p. 1-14 14 p., 255.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Anisotropy of fracture toughness in nanostructured ceramics controlled by grain boundary design

    Daniel, R., Meindlhumer, M., Baumegger, W., Todt, J., Zalesak, J., Ziegelwanger, T., Mitterer, C. & Keckes, J., 2019, In: Materials and Design. 161.2019, January, p. 80-85 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Copper adsorption by chemically modified pine needles

    Solomi, A., Philippou, K., Kostoglou, N., Pashhalidis, I. & Rebholz, C., 2019.

    Research output: Contribution to conference › Poster › Research

  47. Published

    Evolution of structure and residual stress of a fcc/hex-AlCrN multi-layered system upon thermal loading revealed by cross-sectional X-ray nano-diffraction

    Jäger, N., Klima, S., Hruby, H., Julin, J., Burghammer, M., Keckes, J., Mitterer, C. & Daniel, R., 2019, In: Acta materialia. 162.2019, 1, p. 55-66 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Nanoporous activated carbon cloth for H2 storage, selective CO2/CH4 separation and supercapacitor energy storage

    Kostoglou, N., Koczwara, C., Prehal, C., Babic, B., Tampaxis, C., Charalambopoulou, G., Steriotis, T., Polychronopouloe, K., Constantinides, G., Paris, O., Rebholz, C. & Mitterer, C., 2019.

    Research output: Contribution to conference › Poster › Research

  49. Published

    Plasma-Assisted Surface Engineering: Application for Displays and Leather

    Hofer-Roblyek, A. M., 2019

    Research output: Thesis › Doctoral Thesis

  50. Published

    Pulsed Cathodic Arcs from Nb-Al Cathodes

    Zöhrer, S., 2019

    Research output: Thesis › Doctoral Thesis

  51. Published

    Scale-bridging methodology for thermal transport characterization of microelectronic devices

    Mitterhuber, L. M., 2019

    Research output: Thesis › Doctoral Thesis

  52. Published

    Sputter Deposition of Multifunctional Thin Films

    Rausch, M., 2019

    Research output: Thesis › Doctoral Thesis

Previous 12 3 4 5 6 7 8 9 ...14 Next
View graph of relations

Contact information

Roseggerstraße 12 / Max-Tendler-Straße 9, 8700 Leoben
  • Main phone number: +43 3842 402 4201