Surface & coatings technology, ‎0257-8972

Journal

ISSNs0257-8972
Additional searchable ISSN (electronic)0257-8972
1 - 50 out of 155Page size: 50

Research output

  1. 2003
  2. Published

    Structure and mechanical properties of magnetron sputtered Zr-Ti-Cu-N films

    Musil, J. & Daniel, R., 2003, In: Surface & coatings technology.

    Research output: Contribution to journal › Article › Research › peer-review

  3. 2004
  4. Published

    A new low friction concept for Ti1-xAlxN based coatings in high temperature applications

    Kutschej, K., Mayrhofer, P. H., Mitterer, C., Polcik, P. & Kathrein, M., 2004, In: Surface & coatings technology. 188-189, p. 358-363

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Calorimetric evidence for frictional self-adaptation of TiAlN/VN superlattice coatings

    Mayrhofer, P. H., Hovsepian, P. E., Mitterer, C. & Münz, W-D., 2004, In: Surface & coatings technology. 177-178, p. 341-347

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Pulsed laser decomposition of silicon containing carbon thin films

    Lackner, J. M., Waldhauser, W., Ebner, R., Fian, A., Jakopic, G., Leising, G. & Schöberl, T., 2004, In: Surface & coatings technology. 177-178, p. 360-364

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Pulsed laser decomposition of titanium oxide coatings at room temperature - structural and tribological properties

    Lackner, J. M., Waldhauser, W., Ebner, R., Major, B. & Schöberl, T., 2004, In: Surface & coatings technology. 180-181, p. 585-590

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Room temperature deposition of (Ti,Al)N and (Ti,Al)(C,N) coatings by pulsed laser deposition for tribological applications

    Lackner, J. M., Waldhauser, W., Ebner, R., Keckes, J. & Schöberl, T., 2004, In: Surface & coatings technology. 177-178, p. 447-452

    Research output: Contribution to journal › Article › Research › peer-review

  9. 2005
  10. Published

    Comparative study of Ti1-xAlxN coatings alloyed with Hf, Nb, and B

    Kutschej, K., Fateh, N., Mayrhofer, P., Kathrein, M., Polcik, P. & Mitterer, C., 2005, In: Surface & coatings technology. 200, p. 113-117

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Influence of hydrogen sulfide addition on the alumina deposition by plasma CVD

    Fink, M., Laimer, J., Störi, H. & Mitterer, C., 2005, In: Surface & coatings technology. 200, p. 360-363

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Influence of oxide phase formation on the tribological behaviour of Ti-Al-V-N coatings

    Kutschej, K., Mayrhofer, P., Kathrein, M., Polcik, P. & Mitterer, C., 2005, In: Surface & coatings technology. 200, p. 1731-1737

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Influences of the nitrogen content on the morphological, chemical and optical properies of pulsed laser deposited silicon nitride thin films

    Lackner, J., Waldhauser, W., Berghauser, R., Ebner, R., Beutl, M., Jakopic, G., Leising, G., Hutter, H., Rosner, M. & Schöberl, T., 2005, In: Surface & coatings technology. 192, p. 225-230

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Multifunctional multi-component PVD coatings for cutting tools

    Kathrein, M., Michotte, C., Penoy, M., Polcik, P. & Mitterer, C., 2005, In: Surface & coatings technology. 200, p. 1867-1871

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Performance of nano-structured multilayer PVD coating TiAlN/VN in dry high speed milling of aerospace aluminium 7010-T7651

    Luo, Q., Robinson, G., Pittman, M., Howarth, M., Sim, W-M., Stalley, M. R., Leitner, H., Ebner, R., Caliskanoglu, Z. D. & Hovsepian, P. E., 2005, In: Surface & coatings technology. 200, p. 123-127

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Structure, mechanical and tribological properties for sputtered Ti1-xAlxN coatings with 0.5

    Kutschej, K., Mayrhofer, P. H., Kathrein, M., Polcik, P., Tessadri, R. & Mitterer, C., 2005, In: Surface & coatings technology. 200, p. 2358-2365

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Structure-property relations in Cr-C/a-C:H deposited by reactive magnetron sputtering

    Gassner, G., Mayrhofer, P., Mitterer, C. & Kiefer, J., 2005, In: Surface & coatings technology. 200, p. 1147-1150

    Research output: Contribution to journal › Article › Research › peer-review

  18. 2006
  19. Published

    Crystallographic aspects related to advanced tribological multilayers of Cr/CrN and Ti/TiN types produced by pulsed laser deposition (PLD)

    Major, L., Morgiel, J., Major, B., Lackner, J. M., Waldhauser, W., Ebner, R., Nistor, L. & Van Tendeloo, G., 2006, In: Surface & coatings technology. 200, p. 6190-6195

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    High-temperature oxidation resistance of Ta-Si-N films with a high Si content

    Zeman, P., Musil, J. & Daniel, R., 2006, In: Surface & coatings technology.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Magnéli phase formation of PVD Mo-N and W-N coatings

    Gassner, G., Mayrhofer, P. H., Kutschej, K., Mitterer, C. & Kathrein, M., 2006, In: Surface & coatings technology. 201, p. 3335-3341

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Properties of reactively sputtered W-Si-N films

    Musil, J., Daniel, R., Soldán, J. & Zeman, P., 2006, In: Surface & coatings technology.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    The influence of boron content on the tribological performance of Ti-N-B coatings prepared by thermal CVD

    Wagner, J., Hochauer, D., Mitterer, C., Penoy, M., Michotte, C., Wallgram, W. & Kathrein, M., 2006, In: Surface & coatings technology. 201, p. 4247-4252

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Thermal stability of magnetron sputtered Zr–Si–N films

    Daniel, R., Musil, J., Zeman, P. & Mitterer, C., 2006, In: Surface & coatings technology. 201, p. 3368-3376

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    tructure-property-performance relations of high-rate reactive arc-evaporated Ti-B-N nanocomposite coatings

    Neidhardt, J., Sullivan, M. O., Reiter, A. E., Rechberger, W., Grogger, W. & Mitterer, C., 2006, In: Surface & coatings technology. 201, p. 2553-2559

    Research output: Contribution to journal › Article › Research › peer-review

  26. 2007
  27. Published

    Annealing of intrinsic stresses in sputtered TiN films: The role of thickness-dependent gradients of point defect density

    Köstenbauer, H., Fontalvo, G., Kapp, M., Keckes, J. & Mitterer, C., 2007, In: Surface & coatings technology. 201, p. 4777-4780

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Finite Element Simulation of the Effect of surface roughness on nanoindentation of thin films with spherical indenters

    Walter, C., Antretter, T., Daniel, R. & Mitterer, C., 2007, In: Surface & coatings technology. 202, p. 1103-1107

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Hard and superhard TiAlBN coatings deposited by twin electron-beam evaporation

    Rebholz, C., Monclus, M. A., Baker, M. A., Mayrhofer, P. H., Gibson, P. N., Leyland, A. & Matthews, A., 2007, In: Surface & coatings technology. 13, p. 6078-6083

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    High-temperature tribological behavior of sputtered NbNx thin films

    Fontalvo, G., Terziyska, V. & Mitterer, C., 2007, In: Surface & coatings technology. 202, p. 1017-1022

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    The influence of bias voltage on structure and mechanical/tribological properties of arc evaporated Ti-Al-V-N coatings

    Pfeiler, M., Kutschej, K., Penoy, M., Michotte, C., Mitterer, C. & Kathrein, M., 2007, In: Surface & coatings technology. 202, p. 1050-1054

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Thermal stability of superhard Ti-B-N coatings

    Mayrhofer, P. H. & Stoiber, M., 2007, In: Surface & coatings technology. 201, p. 6148-6153

    Research output: Contribution to journal › Article › Research › peer-review

  33. 2008
  34. Published

    Effect of nitrogen-incorporation on structure, properties and performance of magnetron sputtered CrB2

    Budna, K., Mayrhofer, P. H., Neidhardt, J., Hegedus, E., Kovacs, I., Toth, L., Pecz, B. & Mitterer, C., 2008, In: Surface & coatings technology. 202, p. 3088-3093

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Influence of bipolar pulsed DC magnetron sputtering on elemental composition and micro-structure of Ti-Al-Y-N thin films

    Moser, M., Mayrhofer, P. H., Székely, L., Sáfrán, G. & Barna, P. B., 2008, In: Surface & coatings technology. 203, p. 148-155

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Structure and phase evolution of Cr-Al-N coatings during annealing

    Mayrhofer, P. H., Willmann, H. & Reiter, A. E., 2008, In: Surface & coatings technology. 202, p. 4935-4938

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Structure-property relations of arc-evaporated Al-Cr-Si-N coatings

    Soldan, J., Neidhardt, J., Sartory, B., Kaindl, R., Cerstvy, R., Mayrhofer, P. H., Tessadri, R., Polcik, P., Lechthaler, M. & Mitterer, C., 2008, In: Surface & coatings technology. 202, p. 3555-3562

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Synthesis-structure relations for reactive magnetron sputtered V2O5 films

    Fateh, N., Fontalvo, G., Cha, L., Klünsner, T., Hlawacek, G., Teichert, C. & Mitterer, C., 2008, In: Surface & coatings technology. 202, p. 1551-1555

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    The effect of yttrium incorporation on the oxidation resistance of Cr-Al-N coatings

    Rovere, F., Mayrhofer, P. H., Reinholdt, A., Mayer, J. & Schneider, J. M., 2008, In: Surface & coatings technology. 202, p. 5870-5875

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    The influence of age-hardening on turning and milling performance of Ti–Al–N coated inserts

    Chen, L., Du, Y., Mayrhofer, P. H., Wang, S. Q. & Li, J., 2008, In: Surface & coatings technology. 202, p. 5158-5161

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Titanium doped CVD alumina coatings

    Hochauer, D., Mitterer, C., Penoy, M., Michotte, C., Martinz, H-P. & Kathrein, M., 2008, In: Surface & coatings technology. 203, p. 350-356

    Research output: Contribution to journal › Article › Research › peer-review

  42. 2009
  43. Published

    3D versus 2D finite element simulation of the effect of surface roughness on nanoindentation of hard coatings

    Walter, C. & Mitterer, C., 2009, In: Surface & coatings technology. 203, p. 3286-3290

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Improved oxidation resistance of TiAlN coatings by doping with Si or B

    Pfeiler, M., Zechner, J., Penoy, M., Michotte, C., Mitterer, C. & Kathrein, M., 2009, In: Surface & coatings technology. 203, p. 3104-3110

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Influence of phase transition on the tribological performance of arc-evaporated AlCrVN hard coatings

    Franz, R., Neidhardt, J., Kaindl, R., Sartory, B., Tessadri, R., Lechthaler, M., Polcik, P. & Mitterer, C., 2009, In: Surface & coatings technology. 203, p. 1101-1105

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Interface fracture properties of thin films studied by using the micro-cantilever deflection technique

    Matoy, K., Detzel, T., Müller, M., Motz, C. & Dehm, G., 2009, In: Surface & coatings technology. 204, p. 878-881

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    The nanostructure wear and corrosion performance of arc-evaporated CrBxNy nanocomposite coatings

    Polychronopoulou, K., Baker, M. A., Rebholz, C., Neidhardt, J., O 'Sullivan, M., Reiter, A., Kanakis, K., Leyland, A., Matthews, A. & Mitterer, C., 2009, In: Surface & coatings technology. p. 246-255

    Research output: Contribution to journal › Article › Research › peer-review

  48. 2010
  49. Published

    Atom probe specimen preparation and 3D interfacial study of Ti-Al-N thin films

    Rachbauer, R., Massl, S., Stergar, E., Felfer, P. & Mayrhofer, P. H., 2010, In: Surface & coatings technology. 204, p. 1811-1816

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Structure, mechanical properties and oxidation behaviour of arc-evaporated NbAlN hard coatings

    Franz, R., Lechthaler, M., Polzer, C. & Mitterer, C., 2010, In: Surface & coatings technology. 204, p. 2447-2453

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Structure-property relations in ZrCN coatings for tribological applications

    Silva, E., Rebelo De Figueiredo, M., Franz, R., Escobar Galindo, R., Palacio, C., Espinosa, A., Calderon, S., Mitterer, C. & Carvalho, S., 2010, In: Surface & coatings technology. 205, p. 2134-2141

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Thermal stability of sputtered Al2O3 coatings

    Edlmayr, V., Moser, M., Walter, C. & Mitterer, C., 2010, In: Surface & coatings technology. 204, p. 1576-1581

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    Thermally-induced formation of hexagonal AlN in AlCrN hard coatings on sapphire: Orientation relationships and residual stresses

    Bartosik, M., Daniel, R., Mitterer, C. & Keckes, J., 2010, In: Surface & coatings technology. 205, p. 1320-1323

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    Thernal stability of doped CVD K-Al2O3 coatings

    Hochauer, D., Mitterer, C., Penoy, M., Michotte, C., Martinz, H-P. & Kathrein, M., 2010, In: Surface & coatings technology. 204, p. 3713-3722

    Research output: Contribution to journal › Article › Research › peer-review

  55. 2011
  56. Published

    A comparative study on Ti1-xAlxN coatings reactively sputtered from compound and from mosaic targets

    Schalk, N., Weirather, T., Polzer, C., Polcik, P. & Mitterer, C., 2011, In: Surface & coatings technology. 205, p. 4705-4710

    Research output: Contribution to journal › Article › Research › peer-review

  57. Published

    CO addition in low-pressure chemical vapour deposition of medium-temperature TiCxN1-x based hard coatings

    Czettl, C., Mitterer, C., Mühle, U., Rafaja, D., Puchner, S., Hutter, H., Penoy, M., Michotte, C. & Kathrein, M., 2011, In: Surface & coatings technology. 206, p. 1691-1697

    Research output: Contribution to journal › Article › Research › peer-review

  58. Published

    Cathodic arc deposition of (Al,Cr)2O3: Macroparticles and cathode surface modifications

    Pohler, M., Franz, R., Ramm, J., Polic, P. & Mitterer, C., 2011, In: Surface & coatings technology. 206, p. 1454-1460

    Research output: Contribution to journal › Article › Research › peer-review

  59. Published

    Composition, microstructure and mechanical properties of boron containing multilayer coatings for hot forming tools

    Paschke, H., Stüber, M., Ziebert, C., Bistron, M. & Mayrhofer, P. H., 2011, In: Surface & coatings technology. 205, p. 24-28

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 4 Next
View graph of relations