Verena Maier-Kiener

1 - 146 out of 146Page size: 500

Research output

  1. 2025
  2. Published

    Phase-separated Zr70-xAl12.5Fe17.5Yx (x = 0–25 at.%) metallic glasses with suitable mechanical properties for possible implant applications

    Singh, D., Ramasamy, P., Jelinek, A., Maier-Kiener, V., Bhattacharya, R., Chen, Z., Sharifikolouei, E., Scalia, A. C., Najmi, Z., Cochis, A., Fellner, S., Yüce, E., Gammer, C., Zhang, Z. & Eckert, J., 28 Feb 2025, In: Journal of Materials Research and Technology. 35.2025, March-April, p. 6468-6484 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Harvesting superior intrinsic plasticity in nitride ceramics with negative stacking fault energy

    Huang, Y., Chen, Z., Meindlhumer, M., Hahn, R., Holec, D., Leiner, T., Maier-Kiener, V., Zheng, Y., Zhang, Z., Hatzenbichler, L., Riedl, H., Mitterer, C. & Zhang, Z., 23 Jan 2025, In: Acta Materialia. 286.2025, 1 March, 15 p., 120774.

    Research output: Contribution to journal › Article › Research › peer-review

  4. 2024
  5. Published

    Extracting high-temperature stress–strain curves from a 1.2 μm silicon film using spherical nanoindentation

    Schaffar, G. J. K., Tscharnuter, D., Imrich, P. J. & Maier-Kiener, V., 27 Dec 2024, In: Thin solid films. 809.2025, 1 January, 10 p., 140597.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Enhanced thermomechanical fatigue resistance in W10Re alloys: Microstructural and surface engineering approaches

    Sommerauer, M., Seligmann, B., Gottlieb, H., Hohenwarter, A., You, J.-H., Bostrom, N., Pippan, R., Siller, M. & Maier-Kiener, V., 11 Oct 2024, In: Nuclear Materials and Energy. 41.2024, December, 11 p., 101769.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Investigation of Phase Transformations and Ordering Mechanisms in a Pd–Cu–Ag–Ru Alloy

    Lumper, L., Fecher, J., Stark, A. & Maier-Kiener, V., Oct 2024, In: Advanced engineering materials. 26.2024, 19, 10 p., 2400255.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Chemical vapor deposited TiCN/TiC multilayer coatings: On the interplay between coating architecture and mechanical properties

    Kainz, C., Tkadletz, M., Maier-Kiener, V., Völker, B., Burtscher, M., Waldl, H., Schiester, M., Thurner, J., Czettl, C. & Schalk, N., 14 Sept 2024, In: International journal of refractory metals & hard materials. 125.2024, December, 6 p., 106890.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Advancements in metal additive manufacturing: In-situ heat treatment of aluminium alloys during the laser powder bed fusion process

    Schimbäck, D., Kaserer, L., Mair, P., Mohebbi, M. S., Staron, P., Maier-Kiener, V., Letofsky-Papst, I., Kremmer, T., Palm, F., Montes, I., Höppel, H. W., Leichtfried, G. J. & Pogatscher, S., Jul 2024, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 905.2024, July, 10 p., 146102.

    Research output: Contribution to journal › Article › Research › peer-review

  10. E-pub ahead of print

    A new approach for in situ electrochemical nanoindentation: Side charging as a promising alternative

    Zeiler, S., Jelinek, A., Terziyska, V., Schwaiger, R., Mitterer, C., Brinckmann, S. & Maier-Kiener, V., 14 Jun 2024, (E-pub ahead of print) In: Acta materialia. 276.2024, 1 September, 9 p., 120113.

    Research output: Contribution to journal › Article › Research › peer-review

  11. E-pub ahead of print

    Artificial thermal shock cracks in WRe – A proof of concept study

    Sommerauer, M., Siller, M., Pippan, R., Bostrom, N. & Maier-Kiener, V., 29 May 2024, (E-pub ahead of print) In: Nuclear Materials and Energy. 39.2024, June, 8 p., 101685.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Investigating mechanical properties of silicon carbide coated carbon nanotube composite at elevated temperatures

    Mo, J., Schaffar, G. J. K., Du, L., Maier-Kiener, V., Kiener, D., Vollebregt, S. & Zhang, G., 2024, 2024 IEEE 37th International Conference on Micro Electro Mechanical Systems (MEMS). Vol. 37.2024. p. 626-629 4 p. (IEEE access).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  13. Published

    The plasticity of silicon at high temperatures and small length scales

    Schaffar, G. J. K., Tscharnuter, D., Imrich, P. J. & Maier-Kiener, V., 2024.

    Research output: Contribution to conference › Poster › Research

  14. Published

    Understanding high-temperature plasticity in silicon

    Schaffar, G. J. K., Tscharnuter, D. & Maier-Kiener, V., 2024.

    Research output: Contribution to conference › Poster › Research › peer-review

  15. Published

    Using lab-XRD to verify successful electrochemical hydrogen charging for in-situ nanoindentation

    Jelinek, A., Zeiler, S. & Maier-Kiener, V., 2024.

    Research output: Contribution to conference › Poster › Research › peer-review

  16. 2023
  17. Published

    In-situ microscopy methods for imaging high-temperature microstructural processes – Exploring the differences and gaining new potentials

    Lumper, L., Schaffar, G. J. K., Sommerauer, M. & Maier-Kiener, V., 6 Nov 2023, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 887.2023, 6 November, 9 p., 145738.

    Research output: Contribution to journal › Article › Research › peer-review

  18. E-pub ahead of print

    Recent advances in nanomechanical and in situ testing techniques: Towards extreme conditions

    Kiener, D., Wurmshuber, M., Alfreider, M., Schaffar, G. J. K. & Maier-Kiener, V., 30 Sept 2023, (E-pub ahead of print) In: Current opinion in solid state & materials science. 27.2023, 6, 25 p., 101108.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Exploring the high-temperature deformation behavior of monocrystalline silicon – An advanced nanoindentation study

    Schaffar, G., Tscharnuter, D. & Maier-Kiener, V., 29 Jul 2023, In: Materials and Design. 2023, 233, 10 p., 112198.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Nanoindentation creep of supercrystalline nanocomposites

    Yan, C., Bor, B., Plunkett, A., Domenech, B., Maier-Kiener, V. & Giuntini, D., Jul 2023, In: Materials and Design. 231.2023, July, 14 p., 112000.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Strength determination for rough substrate-coating interfaces with three-dimensional defect structure

    Klünsner, T., Krobath, M., Konetschnik, R., Tritremmel, C., Maier-Kiener, V., Samardzic, D., Ecker, W., Czettl, C., Mitterer, C. & Kiener, D., Apr 2023, In: International journal of refractory metals & hard materials. 112.2023, April, 10 p., 106149.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Effect of boron doping on grain boundary cohesion in technically pure molybdenum investigated via meso-scale three-point-bending tests

    Jakob, S., Hohenwarter, A., Lorich, A., Knabl, W., Pippan, R., Clemens, H. & Maier-Kiener, V., 2 Mar 2023, In: International journal of refractory metals & hard materials. 113.2023, June, 4 p., 106173.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Exploring the anneal hardening phenomenon in nanocrystalline Pt-Ru alloys

    Renk, O., Hohenwarter, A., Maier-Kiener, V. & Pippan, R., 15 Feb 2023, In: Journal of alloys and compounds. 935.2023, Part 1, 15 February, 11 p., 168005.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Enhancing mechanical properties of ultrafine-grained tungsten for fusion applications

    Wurmshuber, M., Doppermann, S., Wurster, S., Jakob, S., Balooch, M., Alfreider, M., Schmuck, K. S., Bodlos, R., Romaner, L., Hosemann, P., Clemens, H., Maier-Kiener, V. & Kiener, D., Feb 2023, In: International journal of refractory metals & hard materials. 111.2023, February, 7 p., 106125.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    A comprehensive study on the metallographic preparation of W-Re samples for high resolution electron-based microscopy

    Sommerauer, M., Clemens, H., Maier-Kiener, V. & Siller, M., 2023, Pract. Metallograp.. Vol. 60. p. 171-186

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  26. Published

    Mechanical properties of nanoporous carbons for hydrogen storage applications

    Zeiler, S., Straßburg, M., Kostoglou, N., Maier-Kiener, V. & Mitterer, C., 2023.

    Research output: Contribution to conference › Poster › Research

  27. Published

    The micromechanical characterization of silicon up to 950 °C

    Schaffar, G. J. K., Tscharnuter, D. & Maier-Kiener, V., 2023.

    Research output: Contribution to conference › Poster › Research

  28. 2022
  29. Published

    30 years of Oliver–Pharr: Then, now and the future of nanoindentation

    Maier-Kiener, V., Lawrence, S. K. & Merle, B., Jun 2022, In: JOM. 74.2022, 6, p. 2177-2178 2 p.

    Research output: Contribution to journal › Editorial › peer-review

  30. E-pub ahead of print

    Influence of matrix composition and MC carbide content on damage behaviour of TiN-coated high speed steel due to cyclic shear and compression load

    Gsellmann, M., Klünsner, T., Mitterer, C., Marsoner, S., Leitner, H., Boumpakis, A., Skordaris, G., Maier-Kiener, V. & Ressel, G., 16 May 2022, (E-pub ahead of print) In: Surface & coatings technology. 442.2022, 25 July, 8 p., 128546.

    Research output: Contribution to journal › Article › Research › peer-review

  31. E-pub ahead of print

    Tuning mechanical properties of ultrafine-grained tungsten by manipulating grain boundary chemistry

    Wurmshuber, M., Jakob, S., Doppermann, S., Wurster, S., Bodlos, R., Romaner, L., Maier-Kiener, V. & Kiener, D., 19 Apr 2022, (E-pub ahead of print) In: Acta materialia. 232.2022, 15 June, 13 p., 117939.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    The Phase Transformation of Silicon Assessed by an Unloading Contact Pressure Approach

    Schaffar, G. J. K., Kappacher, J., Tscharnuter, D. & Maier-Kiener, V., 18 Apr 2022, In: JOM. 74.2022, 6, p. 2220-2230 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Indentation unloading phase transformations in silicon: A new perspective

    Schaffar, G. J. K., Tscharnuter, D. & Maier-Kiener, V., 2022.

    Research output: Contribution to conference › Poster › Research

  34. Published

    On the preparation of W-Re conversion layers for highresolution electron microscopy based studies

    Sommerauer, M., Siller, M., Gottlieb, H., Clemens, H. & Maier-Kiener, V., 2022.

    Research output: Contribution to conference › Poster › Research

  35. Published

    The micromechanical characterization of silicon up to 950

    Schaffar, G. J. K., Tscharnuter, D., Imrich, P. J. & Maier-Kiener, V., 2022.

    Research output: Contribution to conference › Poster › Research

  36. 2021
  37. Published

    Grain boundary segregation in Ni-base alloys: A combined atom probe tomography and first principles study

    Ebner, A., Jakob, S., Clemens, H., Pippan, R., Maier-Kiener, V., He, S., Ecker, W., Scheiber, D. & Razumovskiy, V. I., Dec 2021, In: Acta materialia. 221.2021, December, 10 p., 117354.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    High-Temperature Nanoindentation of an Advanced Nano-Crystalline W/Cu Composite

    Burtscher, M., Zhao, M., Kappacher, J., Leitner, A., Wurmshuber, M., Pfeifenberger, M. J., Maier-Kiener, V. & Kiener, D., 3 Nov 2021, In: Nanomaterials. 11, 11, 14 p., 2951.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Rate-depending plastic deformation behaviour in a nickel-base alloy under hydrogen influence

    Ebner, A., Plesiutschnig, E., Clemens, H., Pippan, R. & Maier-Kiener, V., 3 Nov 2021, In: International Journal of Hydrogen Energy . 46.2021, 76, p. 38132-38143 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Bending behavior of zinc-coated hot stamping steels

    Hofer, C., Stadler, M., Kurz, T., Maier-Kiener, V., Mayerhofer, A., Hebesberger, T. & Schnitzer, R., Oct 2021, In: Steel research international. 92, 10, p. 1-9 2100149.

    Research output: Contribution to journal › Article › Research › peer-review

  41. E-pub ahead of print

    Ultralow-temperature superplasticity and its novel mechanism in ultrafine-grained Al alloys

    Chinh, N. Q., Murashkin, M. Y., Bobruk, E. V., Lábár, J. L., Gubicza, J., Kovács, Z., Ahmed, A. Q., Maier-Kiener, V. & Valiev, R. Z., 15 Sept 2021, (E-pub ahead of print) In: Materials Research Letters [Elektronische Ressource]. 9.2021, 11, p. 475-482 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Disordered interfaces enable high temperature thermal stability and strength in a nanocrystalline aluminum alloy

    Balbus, G. H., Kappacher, J., Sprouster, D. J., Wang, F., Shin, J., Eggeler, Y. M., Rupert, T. J., Trelewicz, J. R., Kiener, D., Maier-Kiener, V. & Gianola, D. S., 15 Aug 2021, In: Acta Materialia. 215.2021, 15 August, 14 p., 116973.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Copper and its effects on microstructure and correlated tensile properties of super duplex stainless steels

    Ressel, G., Gsellmann, M., Brandl, D., Landefeld, A., Keplinger, A., Zhang, Z., Maier-Kiener, V. & Schnitzer, R., 21 Jul 2021, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 821, 821, p. 1-11 141544.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Current trends in nanomechanical testing research

    Merle, B., Maier-Kiener, V., Rupert, T. J. & Pharr, G. M., 1 Jul 2021, In: Journal of materials research (JMR). 36.2021, 11, p. 2133-2136 14 p.

    Research output: Contribution to journal › Editorial › peer-review

  45. Published

    Extracting information from noisy data: strain mapping during dynamic in situ SEM experiments

    Alfreider, M., Meindlhumer, M., Maier-Kiener, V., Hohenwarter, A. & Kiener, D., 14 Jun 2021, In: Journal of materials research (JMR). 36.2021, 11, p. 2291-2304 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Assessment of grain boundary cohesion of technically pure and boron micro-doped molybdenum via meso-scale three-point-bending experiments

    Jakob, S., Hohenwarter, A., Lorich, A., Knabl, W., Pippan, R., Clemens, H. & Maier-Kiener, V., 24 May 2021, In: Materials and Design. 207.2021, September, 8 p., 109848.

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    High temperature nanoindentation as a tool to investigate plasticity upon phase transformations demonstrated on Cobalt

    Kappacher, J., Tkadletz, M., Clemens, H. & Maier-Kiener, V., May 2021, In: Materialia. 16.2021, May, 9 p., 101084.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Geometrical model for calculating the effect of surface morphology on total x-ray output of medical x-ray tubes

    Siller, M., Minkkinen, M., Bogust, P., Jelinek, A., Schatte, J., Bostrom, N., Greenland, K., Knabl, W., Clemens, H., Pippan, R. & Maier-Kiener, V., Apr 2021, In: Medical physics. 48.2021, 4, p. 1546-1556 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Strength ranking for interfaces between a TiN hard coating and microstructural constituents of high speed steel determined by micromechanical testing

    Gsellmann, M., Klünsner, T., Mitterer, C., Krobath, M., Wurmshuber, M., Leitner, H., Ecker, W., Marsoner, S., Maier-Kiener, V., Kiener, D. & Ressel, G., 31 Mar 2021, In: Materials and Design. 204.2021, June, 11 p., 109690.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Correction to: Controlling the high temperature deformation behavior and thermal stability of ultra‑fine‑grained W by re alloying. Correction to: Journal of Materials Research https://doi.org/10.1557/s43578-020-00026-z

    Kappacher, J., Renk, O., Kiener, D., Clemens, H. & Maier-Kiener, V., Feb 2021, In: Journal of Materials Research. 36, 3, p. 784-784 1 p.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Controlling the high temperature deformation behavior and thermal stability of ultra-fine-grained W by re alloying

    Kappacher, J., Renk, O., Kiener, D., Clemens, H. & Maier-Kiener, V., 25 Jan 2021, In: Journal of Materials Research. 2021, 12, p. 2408-2419 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    How the interface type manipulates the thermochemanical response of nanostructured metals: A case study on nickel: A case study on nickel

    Renk, O., Maier-Kiener, V., Motz, C., Eckert, J., Kiener, D. & Pippan, R., 24 Jan 2021, In: Materialia. 2021, 15, 13 p., 101020.

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    Advanced in situ electrochemical nanoindentation testing for understanding hydrogen-materials interactions

    Ebner, A., Clemens, H., Pippan, R. & Maier-Kiener, V., 2021.

    Research output: Contribution to conference › Poster › Research

  54. Published

    How grain boundary characteristics influence plasticity close to and above the critical temperature of ultra-fine grained bcc Ta2.5W

    Kappacher, J., Renk, O., Kiener, D., Clemens, H. & Maier-Kiener, V., 2021, In: Acta materialia. 2021, 216, 11 p., 117110.

    Research output: Contribution to journal › Article › Research › peer-review

  55. Published

    Stable and metastable phases in Cu20Sn investigated via high resolution methods

    Lumper, L., Kappacher, J., Clemens, H. & Maier-Kiener, V., 2021.

    Research output: Contribution to conference › Poster › Research

  56. 2020
  57. Published

    Microstructural evolution of W-10Re alloys due to thermal cycling at high temperatures and its impact on surface degradation

    Siller, M., Schatte, J., Gerzoskovitz, S., Knabl, W., Pippan, R., Clemens, H. & Maier-Kiener, V., Nov 2020, In: International journal of refractory metals & hard materials. 92.2020, November, 11 p., 105285.

    Research output: Contribution to journal › Article › Research › peer-review

  58. Published

    Addressing H-Material Interaction in Fast Diffusion Materials—A Feasibility Study on a Complex Phase Steel

    Massone, A., Manhard, A., Drexler, A., Posch, C., Ecker, W., Maier-Kiener, V. & Kiener, D., 2 Oct 2020, In: Materials. 13.2020, 20, p. 1-20 20 p., 4677.

    Research output: Contribution to journal › Article › Research › peer-review

  59. E-pub ahead of print

    Multi-method characterization approach to facilitate a strategy to design mechanical and electrical properties of sintered copper

    Wijaya, A., Eichinger, B., Chamasemani, F. F., Sartory, B., Hammer, R., Maier-Kiener, V., Kiener, D., Mischitz, M. & Brunner, R., 28 Sept 2020, (E-pub ahead of print) In: Materials and Design. 2021, 197, 11 p., 109188.

    Research output: Contribution to journal › Article › Research › peer-review

  60. Published

    Hydrogen assisted intergranular cracking of alloy 725: The effect of boron and copper alloying

    Taji, I., Hajilou, T., Ebner, A., Scheiber, D., Karimi, S., Plesiutschnig, E., Ecker, W., Barnoush, A., Maier-Kiener, V., Johnsen, R. & Razumovskiy, V. I., 25 Apr 2020, In: Corrosion science. 203.2022, 15 July, 14 p., 110331.

    Research output: Contribution to journal › Article › Research › peer-review

  61. Published

    Thermally activated deformation mechanisms and solid solution softening in W-Re alloys investigated via high temperature nanoindentation

    Kappacher, J., Leitner, A., Kiener, D., Clemens, H. & Maier-Kiener, V., 1 Apr 2020, In: Materials and Design. 189.2020, April, 6 p., 108499.

    Research output: Contribution to journal › Article › Research › peer-review

  62. Published

    A Modified Electrochemical Nanoindentation Setup for Probing Hydrogen-Material Interaction Demonstrated on a Nickel-Based Alloy

    Ebner, A. S., Brinckmann, S., Plesiutschnig, E., Clemens, H., Pippan, R. & Maier-Kiener, V., 16 Mar 2020, In: JOM. 72.2020, 5, p. 2020-2029 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  63. Published

    Inconel-Steel Multilayers by Liquid Dispersed Metal Powder Bed Fusion: Microstructure, Residual Stress and Property Gradients

    Bodner, S. C., van de Vorst, L. T. G., Zalesak, J., Todt, J., Keckes, J., Maier-Kiener, V., Sartory, B., Schell, N., Hooijmans, J. W., Saurwalt, J. J. & Keckes, J., Mar 2020, In: Additive Manufacturing. 32.2020, March, 101027.

    Research output: Contribution to journal › Article › Research › peer-review

  64. 2019
  65. Published

    Microstructural characterization of molybdenum grain boundaries by micropillar compression testing and atom probe tomography

    Jakob, S., Lorich, A., Eidenberger-Schober, M., Knabl, W., Clemens, H. & Maier-Kiener, V., 5 Dec 2019, In: Practical metallography = Praktische Metallographie. 56.2019, 12, p. 776-786 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  66. Published

    Influence of annealing on microstructure and mechanical properties of ultrafine-grained Ti45Nb

    Völker, B., Maier-Kiener, V., Werbach, K., Müller, T., Pilz, S., Calin, M., Eckert, J. & Hohenwarter, A., 5 Oct 2019, In: Materials and Design. 179.2019, 5 October, 11 p., 107864.

    Research output: Contribution to journal › Article › Research › peer-review

  67. Published

    Low temperature deformation of MoSi2 and the effect of Ta, Nb and Al as alloying elements

    Zenk, C., Gibson, J. S. K. L., Maier-Kiener, V., Neumeier, S., Göken, M. & Korte-Kerzel, S., 2 Oct 2019, In: Acta materialia. 181.2019, December, p. 385-398 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  68. Published

    Influence of crystal orientation and Berkovich tip rotation on the mechanical characterization of grain boundaries in molybdenum

    Jakob, S., Leitner, A., Lorich, A., Eidenberger-Schober, M., Knabl, W., Pippan, R., Clemens, H. & Maier-Kiener, V., 2 Jul 2019, In: Materials & design. 182.2019, 15 November, p. 1-9 9 p., 107998.

    Research output: Contribution to journal › Article › Research › peer-review

  69. Published

    Deformation behavior of aluminum pillars produced by Xe and Ga focused ion beams: Insights from strain rate jump tests

    Xiao, Y., Maier-Kiener, V., Michler, J., Spolenak, R. & Wheeler, J. M., 7 Jun 2019, In: Materials and Design. 181.2019, November, 11 p., 107914 .

    Research output: Contribution to journal › Article › Research › peer-review

  70. Published

    Rate limiting deformation mechanisms of bcc metals in confined volumes

    Kiener, D., Fritz, R., Alfreider, M., Leitner, A., Pippan, R. & Maier-Kiener, V., 1 Mar 2019, In: Acta Materialia. 166.2019, March, p. 687-701 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  71. Published

    Anneal hardening and elevated temperature strain rate sensitivity of nanostructured metals: Their relation to intergranular dislocation accommodation

    Renk, O., Maier-Kiener, V., Issa, I., Li, J. H., Kiener, D. & Pippan, R., 15 Feb 2019, In: Acta materialia. 165.2019, 165, p. 409-419 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  72. Published

    Deformation-induced phase transformation in a Co-Cr-W-Mo alloy studied by high-energy X-ray diffraction during in-situ compression tests

    Weißensteiner, I., Petersmann, M., Erdely, P., Stark, A., Antretter, T., Clemens, H. & Maier-Kiener, V., Feb 2019, In: Acta materialia. 164.2019, February, p. 272-282 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  73. Published

    Combination of Nanoindentation and Microscopy for the Examination of Aluminum Alloys in Coarse- and Ultrafine-Grained Condition

    Kappacher, J., Leitner, A., Clemens, H. & Maier-Kiener, V., 9 Jan 2019, In: Practical metallography = Praktische Metallographie. 56.2019, 7, p. 432-442 11 p.

    Research output: Contribution to journal › Article › Research

  74. Published

    Beryllium – A challenge for preparation and mechanical characterization

    Siller, M., Kappacher, J., Rolli, R., Clemens, H. & Maier-Kiener, V., 2019, In: Practical metallography = Praktische Metallographie. 56.2019, 10, p. 624-633 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  75. Published

    Exploring the mechanical character of molybdenum grain boundaries via nanoindentation and three-point-bending

    Jakob, S., Leitner, A., Hohenwarter, A., Lorich, A., Knabl, W., Clemens, H., Pippan, R. & Maier-Kiener, V., 2019.

    Research output: Contribution to conference › Poster › Research

  76. Published

    Thermally activated deformation mechanisms – High temperature nanoindentation on W-Re alloys

    Kappacher, J., Wurmshuber, M., Leitner, A., Kiener, D., Clemens, H. & Maier-Kiener, V., 2019.

    Research output: Contribution to conference › Poster › Research

  77. Published

    Thermally activated deformation processes in various materials studied by advanced nanoindentation experiments

    Maier-Kiener, V., 2019

    Research output: Thesis › Habilitation thesis › peer-review

  78. 2018
  79. Published

    Factors controlling shale microstructure and porosity: A case study on Upper Visean Rudov Beds from the Ukrainian Dniepr-Donets Basin: A case study on upper visean rudov beds from the Ukrainian Dneiper-Donets Basin

    Misch, D., Klaver, J., Gross, D., Mayer-Kiener, V., Mendez-Martin, F., Schmatz, J. & Sachsenhofer, R. F., 1 Dec 2018, In: AAPG bulletin. 102, 12, p. 2629-2654 26 p.

    Research output: Contribution to journal › Article › Research › peer-review

  80. Published

    Mechanical properties of the magnetocaloric intermetallic LaFe11.2Si1.8 alloy at different length scales

    Glushko, O., Funk, A., Maier-Kiener, V., Kraker, P., Krautz, M., Eckert, J. & Waske, A., 20 Nov 2018, In: Acta materialia. 165.2019, February, p. 40-50 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  81. Published

    Die Grenzen der Austenitrückkonstruktion eines mehrphasigen Stahles in unterschiedlichen Gefügemodifikationen

    Weißensteiner, I., Thomas, H., Clemens, H. & Maier-Kiener, V., 19 Sept 2018, Praktische Metallographie Sonderband: Fortschritte in der Metallographie. 1 ed. Vol. 52. p. 301-306 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  82. Published

    Grain boundary segregation engineering in as-sintered molybdenum for improved ductility

    Leitner, K., Lutz, D., Knabl, W., Eidenberger-Schober, M., Huber, K., Lorich, A., Clemens, H. & Maier-Kiener, V., 20 Jul 2018, In: Scripta materialia. 156.2018, November, p. 60-63 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  83. Published

    High Temperature Flow Behavior of Ultra-Strong Nanoporous Au assessed by Spherical Nanoindentation

    Leitner, A., Maier-Kiener, V. & Kiener, D., 24 May 2018, In: Nanomaterials. 8.2018, 6, p. 1-12 12 p., 366.

    Research output: Contribution to journal › Article › Research › peer-review

  84. Published

    Essential refinements of spherical nanoindentation protocols for the reliable determination of mechanical flow curves

    Leitner, A., Maier-Kiener, V. & Kiener, D., 15 May 2018, In: Materials and Design. 146.2018, May, p. 69-80 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  85. Published

    Effect of Morphological Differences on the Cold Formability of an Isothermally Heat-Treated Advanced High-Strength Steel

    Weißensteiner, I., Suppan, C., Hebesberger, T., Winkelhofer, F., Clemens, H. & Maier-Kiener, V., 10 Apr 2018, In: JOM. 70.2018, 8, p. 1567-1575 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  86. E-pub ahead of print

    On the modelling of mixed lubrication of conformal contacts

    Bergmann, P., Grun, F., Gódor, I., Stadler, G. & Maier-Kiener, V., 26 Mar 2018, (E-pub ahead of print) In: Tribology International. 125.2018, September, p. 220-236 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  87. Published

    Bulk metallic dual phase glasses by severe plastic deformation

    Krämer, L., Champion, Y., Kormout, K. S., Maier-Kiener, V. & Pippan, R., 12 Jan 2018, In: Intermetallics. 94.2018, March, p. 172-178 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  88. Published

    Beryllium - Eine Herausforderung für Präparation und mechanische Charakterisierung

    Siller, M., Kappacher, J., Rolli, R., Clemens, H. & Maier-Kiener, V., 2018, Praktische Metallographie Sonderband: Fortschritte in der Metallographie. 1 ed. Vol. 52. p. 183-188

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  89. Published

    Impact of the Microstructure of Refractory Metals on their Mechanical Properties - a Multi-Scale Study / Wie die Mikrostruktur von Refraktärmetallen deren mechanische Eigenschaften beeinflusst – eine skalenübergreifende Studie

    Maier-Kiener, V., Siller, M., Jakob, S., Leitner, K., Clemens, H., Lorich, A., Lang, D., Schatte, J., Eidenberger-Schober, M. & Knabl, W., 2018, In: Practical metallography = Praktische Metallographie. 55.2018, 9, p. 603-619 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  90. Published

    Interaction of precipitation, recovery and recrystallization in the Mo-Hf-C alloy MHC studied by multipass compression tests

    Siller, M., Lang, D., Schatte, J., Knabl, W., Clemens, H. & Maier-Kiener, V., 2018, In: International journal of refractory metals & hard materials. 73.2018, June, p. 199-203 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  91. Published

    Kombination von Nanoindentation und Mikroskopie zur Untersuchung von Aluminium-Legierungen im grob- und ultrafeinkörnigen Zustand

    Kappacher, J., Leitner, A., Clemens, H. & Maier-Kiener, V., 2018, Praktische Metallographie Sonderband: Fortschritte in der Metallographie. 1 ed. Vol. 52. p. 177-182

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  92. Published

    Mikrostrukturelle Charakterisierung von Molybdän- Korngrenzen mittels Mikrosäulen-Druckversuchen und Atomsondenuntersuchungen

    Jakob, S., Lorich, A., Eidenberger-Schober, M., Knabl, W., Clemens, H. & Maier-Kiener, V., 2018, Praktische Metallographie Sonderband: Fortschritte in der Metallographie. 1 ed. Vol. 52. p. 171-176

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  93. Published

    Spherical nanoindentation as an efficient tool to assess thermo-mechanical behavior of nanoporous Au

    Leitner, A., Maier-Kiener, V. & Kiener, D., 2018.

    Research output: Contribution to conference › Poster › Research

  94. Published

    Strain-induced martensitic transformation in a Co-Cr-W-Mo alloy probed by nanoindentation

    Weißensteiner, I., Voigt, P., Clemens, H. & Maier-Kiener, V., 2018, Proceedings of the International Conference on Martensitic Transformations. p. 247-250

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  95. Published

    Wie die Mikrostruktur von Hochleistungswerkstoffen deren mechanische Eigenschaften beeinflusst - eine skalenübergreifende Studie

    Maier-Kiener, V., Siller, M., Jakob, S., Leitner, K., Clemens, H., Lorich, A., Lang, D., Schatte, J., Eidenberger-Schober, M. & Knabl, W., 2018, Fortschritte in der Metallographie : Sonderbände der Praktischen Metallographie. 1 ed. DGM, Vol. 52. p. 3-13

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  96. 2017
  97. Published

    Dominating deformation mechanisms in ultrafine-grained chromium across length scales and temperatures

    Fritz, R., Wimler, D., Leitner, A., Maier-Kiener, V. & Kiener, D., 1 Nov 2017, In: Acta materialia. 140.2017, November, p. 176-187 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  98. Published

    Insights into the deformation behavior of the CrMnFeCoNi high-entropy alloy revealed by elevated temperature nanoindentation

    Maier-Kiener, V., Schuh, B., George, E. P., Clemens, H. & Hohenwarter, A., 1 Jul 2017, In: Journal of materials research (JMR). 32.2017, 14, p. 2658-2667 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  99. Published

    Dynamic nanoindentation testing: is there an influence on a material’s hardness?

    Leitner, A., Maier-Kiener, V. & Kiener, D., 1 Jun 2017, In: Materials Research Letters [Elektronische Ressource]. 5.2017, 7, p. 486-493 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  100. E-pub ahead of print

    Influence of modulus-to-hardness ratio and harmonic parameters on continuous stiffness measurement during nanoindentation

    Merle, B., Maier-Kiener, V. & Pharr, G. M., 21 May 2017, (E-pub ahead of print) In: Acta materialia. 134.2017, 1 August, p. 167-176 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  101. Published

    Source rock assessment from basin- to nano-scale: A case study from the Ukrainian Dniepr-Donets Basin

    Misch, D., Groß, D., Klaver, J., Schmatz, J., Sachsenhofer, R., Bechtel, A., Maier-Kiener, V., Kiener, D. & Mendez Martin, F., Mar 2017.

    Research output: Contribution to conference › Abstract › peer-review

  102. Published

    Phase decomposition of a single-phase AlTiVNb high-entropy alloy after severe plastic deformation and annealing

    Schuh, B., Völker, B., Maier-Kiener, V., Todt, J., LI, J. & Hohenwarter, A., 3 Jan 2017, In: Advanced engineering materials. 19.2017, 4, 10 p., 1600674.

    Research output: Contribution to journal › Article › Research › peer-review

  103. Published

    Characterization of a Biocompatible Co-Cr-W Alloy by means of Correlative Microscopy and Nanoindentation Experiments

    Weißensteiner, I., Voigt, P., Clemens, H. & Maier-Kiener, V., 2017.

    Research output: Contribution to conference › Poster › Research

  104. Published

    Deformation mechanisms during severe plastic deformation of a CueAg composite

    Kormout, K., Ghosh, P., Maier-Kiener, V. & Pippan, R., 2017, In: Journal of alloys and compounds. 695, p. 2285-2294 10 p.

    Research output: Contribution to journal › Article › Research

  105. Published

    Interaction of precipitation, recovery and recrystallization in the Mo-Hf-C alloy MHC studied by multipass compression tests

    Siller, M., Lang, D., Schatte, J., Knabl, W., Clemens, H. & Maier-Kiener, V., 2017, 19th Plansee Seminar. p. 21/1-21/10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  106. Published

    Nanoindentation testing as a powerful screening tool for assessing phase stability of nanocrystalline high-entropy alloys

    Maier-Kiener, V., Schuh, B., George, E. P., Clemens, H. & Hohenwarter, A., 2017, In: Materials and Design. 115.2017, 5 February, p. 479-485 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  107. Published

    Werkstoffcharakterisierung mittels hochauflösender dreidimensionaler Atomsondentomographie

    Mayer, S., Maier-Kiener, V., Mendez Martin, F., Panzenböck, M., Rashkova, B. & Clemens, H., 2017, In: Jahresmagazin Materialographie, Metallographie : Ingenieurwissenschaften ... : im Fokus. 2017, p. 56-60 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  108. 2016
  109. Published

    Nanoindentation testing as a tool for assessing the microstructure-property relationship of ultrafine grained and single crystalline HEAs

    Maier-Kiener, V., Schuh, B., George, E., Clemens, H. & Hohenwarter, A., 29 Dec 2016.

    Research output: Contribution to conference › Presentation › Research

  110. E-pub ahead of print

    Extracting flow curves from nano-sized metal layers in thin film systems

    Kozic, D., Maier-Kiener, V., Konetschnik, R., Gänser, H.-P., Antretter, T., Brunner, R. & Kiener, D., 7 Dec 2016, (E-pub ahead of print) In: Scripta materialia. 130.2017, 15 March, p. 143-147 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  111. E-pub ahead of print

    Extraction of flow behavior and hall–petch parameters using a nanoindentation multiple sharp tip approach

    Leitner, A., Maier-Kiener, V. & Kiener, D., 29 Nov 2016, (E-pub ahead of print) In: Advanced engineering materials. 19.2017, 4, 9 p., 1600669.

    Research output: Contribution to journal › Article › Research › peer-review

  112. Published

    Interplay between sample size and grain size: Single crystalline vs. ultrafine-grained chromium micropillars

    Fritz, R., Maier-Kiener, V., Lutz, D. & Kiener, D., 30 Sept 2016, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 674.2016, 30 September, p. 626-633 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  113. Published

    Phase decomposition of a nanocrystalline AlNbTiV high-entropy alloy

    Schuh, B., Völker, B., Todt, J., Hohenwarter, A., Maier-Kiener, V. & Li, J., 5 Aug 2016.

    Research output: Contribution to conference › Presentation › Research

  114. Published

    Strain-rate sensitivity of ultrafine-grained materials and composites

    Kiener, D., Leitner, A. & Maier-Kiener, V., 4 Jul 2016.

    Research output: Contribution to conference › Presentation › Research

  115. Published

    Deformation behaviour of BCC metals investigated by small- and macro-scale testing techniques

    Fritz, R., Wimler, D., Famelton, J., Leitner, A., Maier-Kiener, V. & Kiener, D., 31 May 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  116. Published

    Phase Characterization of a Biocompatible Co-Cr-W Alloy by means of Correlative Microscopy

    Weißensteiner, I., Voigt, P., Clemens, H. & Maier-Kiener, V., 28 Apr 2016.

    Research output: Contribution to conference › Presentation › Research

  117. Published

    Deformation Characteristics of Ultra-fine Grained BCC Metals at Ambient and Elevated Temperatures

    Kiener, D., Fritz, R., Wimler, D., Leitner, A. & Maier-Kiener, V., 12 Apr 2016.

    Research output: Contribution to conference › Presentation › Research

  118. Published

    Small scale deformation behavior of Au – influence of microstructure and temperature

    Maier-Kiener, V., Kiener, D., Leitner, A. & Pippan, R., 18 Feb 2016.

    Research output: Contribution to conference › Presentation › Research

  119. Published

    In-situ investigation of rate dependent material properties under non-ambient conditions: Challenges, limitations & insights

    Fritz, R., Wimler, D., Leitner, A., Maier-Kiener, V. & Kiener, D., 16 Feb 2016.

    Research output: Contribution to conference › Presentation › Research

  120. Published

    Microstructural stability of a single-phase nanocrystalline CoCrFeMnNi high-entropy alloy

    Schuh, B., Hohenwarter, A., Maier-Kiener, V., Clemens, H., Völker, B., Mendez Martin, F. & George, E., 15 Feb 2016.

    Research output: Contribution to conference › Presentation › Research

  121. Published

    Thermally Activated Deformation Processes in Body-Centered Cubic Cr – How Microstructure Influences Strain-Rate Sensitivity

    Maier-Kiener, V., Kiener, D., Pippan, R. & Hohenwarter, A., 15 Feb 2016.

    Research output: Contribution to conference › Presentation › Research

  122. Published

    Microstrucural Investigations of a nanocrystalline CoCrNi alloy

    Schuh, B., Hohenwarter, A., Mendez Martin, F., Völker, B. & Maier-Kiener, V., 6 Feb 2016.

    Research output: Contribution to conference › Poster › Research

  123. Published

    Analyse einer Co-Cr-W Legierung mittels korrelativer Mikroskopie und Nanoindentation

    Weißensteiner, I., Voigt, P., Clemens, H. & Maier-Kiener, V., 2016.

    Research output: Contribution to conference › Presentation › Research

  124. Published

    Contribution of Free Surface and Dislocation Density to the Strength Scaling Behaviour in Ultrafine-grained BCC Chromium

    Fritz, R., Leitner, A., Maier-Kiener, V. & Kiener, D., 2016.

    Research output: Contribution to conference › Presentation › Research

  125. Published

    Correlative study of grain boundary segregation in sintered molybdenum alloys

    Lutz, D., Leitner, K., Huber, K., Lorich, A., Maier-Kiener, V. & Clemens, H., 2016.

    Research output: Contribution to conference › Presentation › Research

  126. Published

    Deformation in the y-Mg17Al12 phase at 25-278 °C

    Mathur, H. N., Maier-Kiener, V. & Korte, S., 2016, In: Acta materialia. 113, p. 221-229 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  127. Published

    Does dynamic nanoindentation testing influence the acquired mechanical properties?

    Leitner, A., Cordill, M. J., Maier-Kiener, V. & Kiener, D., 2016.

    Research output: Contribution to conference › Presentation › Research

  128. Published

    Dynamic indentation testing: Is there an influence on mechanical properties?

    Leitner, A., Cordill, M. J., Maier-Kiener, V. & Kiener, D., 2016.

    Research output: Contribution to conference › Presentation › Research

  129. Published

    Fracture and Material Behavior of Thin Film composites

    Kozic, D., Konetschnik, R., Maier-Kiener, V., Schöngrundner, R., Brunner, R., Kiener, D., Antretter, T. & Gänser, H.-P., 2016, 2016 17th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE) . Institute of Electrical and Electronics Engineers, p. 1-6 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  130. Published

    Influence of Free Surface on the Deformation Behaviour of ufg Chromium at Ambient & Elevated Temperatures

    Fritz, R., Leitner, A., Maier-Kiener, V. & Kiener, D., 2016.

    Research output: Contribution to conference › Presentation › Research

  131. Published

    Interface dominated mechanical properties of ultra-fine grained and nanoporous Au at elevated temperatures

    Leitner, A., Maier-Kiener, V., Jeong, J., Abad, M. D., Hosemann, P., Oh, S. H. & Kiener, D., 2016, In: Acta materialia. 121.2016, December, p. 104-116 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  132. Published

    Nanoindentation testing as a tool for assessing the microstructure-property relationship of ultrafine grained and single crystalline HEAs

    Maier-Kiener, V., Schuh, B., George, E., Clemens, H. & Hohenwarter, A., 2016.

    Research output: Contribution to conference › Presentation › Research

  133. Published

    Nanokristalline High-Entropy Legierungen

    Hohenwarter, A., Schuh, B., Völker, B., Pippan, R., Maier-Kiener, V., Clemens, H. & George, E. P., 2016.

    Research output: Contribution to conference › Presentation › Research

  134. Published

    Phase Characterization of a Biocompatible Co-Cr-W Alloy Via Correlative Microscopy

    Weißensteiner, I., Voigt, P., Maier-Kiener, V. & Clemens, H., 2016, In: Practical metallography = Praktische Metallographie. 53, 7, p. 450-461 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  135. Published

    Phasencharakterisierung mittels korrelativer Mikroskopie an einer biokompatiblen Co-Cr-W Legierung

    Weißensteiner, I., Voigt, P., Maier-Kiener, V. & Clemens, H., 2016, Sonderbände der Praktischen Metallographie: Fortschritte in der Metallographie. Vol. 48. p. 151-156 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  136. Published

    Precipitation-strengthened high-temperature ferrites

    Godor, F., Liebscher, C., Stein, F., Palm, M., Rashkova, B., Maier-Kiener, V., Mayer, S. & Clemens, H., 2016.

    Research output: Contribution to conference › Presentation › Research

  137. Published

    Small scale deformation behavior of Au – influence of microstructure and temperature

    Maier-Kiener, V., Leitner, T., Kiener, D. & Pippan, R., 2016.

    Research output: Contribution to conference › Presentation › Research

  138. Published

    Strain-induced martensitic transformation in a Co-Cr-W alloy studied by in-situ HEXRD experiments

    Weißensteiner, I., Erdely, P., Voigt, P., Clemens, H. & Maier-Kiener, V., 2016.

    Research output: Contribution to conference › Poster › Research

  139. 2015
  140. Published

    Influence of Microstructure on the Deformation Behaviour of Chromium

    Fritz, R., Wimler, D., Krautgasser, C., Leitner, A., Maier, V. & Kiener, D., 9 Apr 2015.

    Research output: Contribution to conference › Poster › Research

  141. Published

    Thermally activated deformation processes in body-centered cubic Cr - How microstructure influences strain-rate sensitivity

    Maier, V., Hohenwarter, A., Pippan, R. & Kiener, D., 31 Mar 2015, In: Scripta materialia. 106, p. 42-45 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  142. Published

    Deformation behavior of ultra-fine porous Au

    Leitner, A., Maier-Kiener, V., Hosemann, P. & Kiener, D., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  143. Published

    Elevated temperature mechanical properties of novel ultra-fine grained Cu-Nb composites

    Primorac, M.-M., Abad, M. D., Hosemann, P., Kreuzeder, M., Maier, V. & Kiener, D., 2015, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 625, p. 296-302

    Research output: Contribution to journal › Article › Research › peer-review

  144. Published

    Fabrication and thermo-mechanical behavior of ultra-fine porous copper

    Kreuzeder, M., Abad, M. D., Primorac, M.-M., Hosemann, P., Maier, V. & Kiener, D., 2015, In: Journal of materials science. 50, p. 634-643

    Research output: Contribution to journal › Article › Research › peer-review

  145. Published

    Probing thermally activated properties on a local scale

    Kiener, D., Leitner, A. & Maier-Kiener, V., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  146. Published

    Temperature-dependent deformation of ufg materials and composites

    Maier-Kiener, V., Leitner, A., Kreuzeder, M., Primorac, M.-M., Hosemann, P. & Kiener, D., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  147. Published

    Thermo-mechanical properties of fine grained materials: Porous vs. crystalline vs. Composite

    Kiener, D., Kreuzeder, M., Primorac, M.-M., Leitner, A., Abad, M. D., Hosemann, P. & Maier-Kiener, V., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  148. Published

    Thermo-mechanical properties of ultra-fine grained fcc-bcc composites

    Maier-Kiener, V., Primorac, M.-M., Leitner, A., Kreuzeder, M. & Kiener, D., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  149. 2014
  150. Published

    Final report PN 6019

    Maier, V. & Kiener, D., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  151. Published

    Multicomponent materials from machining chips compacted by equal-channel angular pressing

    Lapovok, R., Qi, Y., Ng, H. P., Maier, V. & Estrin, Y., 2014, In: Journal of materials science. 49, p. 1193-1204

    Research output: Contribution to journal › Article › Research › peer-review

  152. Published

    The Influence of Grain Boundaries and Loading Conditions on the Deformation Behavior of bcc-and fcc-Metals

    Maier, V., Scherwitzel, D. & Kiener, D., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  153. Published

    The influence of strain rate and critical temperature on the deformation behavior of W, V and Cr

    Fritz, R., Riegelnegg, E., Treml, R., Alfreider, M., Maier, V. & Kiener, D., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  154. Published

    The Strengthening Effect of Phase Boundaries in a Severely Plastically Deformed Ti-Al Composite Wire

    Marr, T., Maier, V., Freudenberger, J., Höppel, H. W., Göken, M. & Schultz, L., 2014, In: Metals : open access journal . 4, p. 37-54

    Research output: Contribution to journal › Article › Research › peer-review

  155. 2013
  156. Published

    Activation Parameters for Deformation of Ultrafine-Grained Aluminium as Determined by Indentation Strain Rate Jumps at Elevated Temperature

    Wheeler, J. M., Maier, V., Durst, K., Göken, M. & Michler, J., 2013, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 585, p. 108-113

    Research output: Contribution to journal › Article › Research › peer-review

  157. Published

    An improved long-term nanoindentation creep testing approach for studying the local deformation processes in nanocrystalline metals at room and elevated temperatures

    Maier, V., Merle, B., Göken, M. & Durst, K., 2013, In: Journal of materials research (JMR). 28, p. 1177-1188

    Research output: Contribution to journal › Article › Research › peer-review

  158. 2010
  159. Published

    Verfahren zur Herstellung eines mehrlagigen metallischen Verbundblechs und Verbundblech

    Schmidt, C. (Inventor), Knieke, C. (Inventor), Peukert, W. (Inventor), Maier, V. (Inventor), Höppel, H. W. (Inventor) & Göken, M. (Inventor), 29 Jun 2010

    Research output: Patent

  160. Published

    Verfahren zur Herstellung eines mehrlagigen metallischen Verbundblechs unter Verwendung einer Partikel-Suspension; entsprechendes Verbundblech

    Schmidt, C. (Inventor), Knieke, C. (Inventor), Peukert, W. (Inventor), Maier, V. (Inventor), Höppel, H. W. (Inventor) & Göken, M. (Inventor), 10 May 2010

    Research output: Patent

View graph of relations

Contact

Phone: 4206

Latest Research Output

View more (146)